Our Client:

• Cranes Lifting Industry
• 5 Days, Office Hours
• West Region
• Up to $4300 Per Month

Responsibilities:

• Investigate all incidents and product nonconformity to identify causes and ways to prevent occurrence in future.
• Support and promote the company incident report and management system.
• Provide guidance to business on consistency of HSE and QMS expertise by participating in Management reviews and audits.
• Monitor company’s ISO 9001 Management System are implemented and maintained in Singapore and Malaysia.
• Control of system documentations and procedures for Southeast Asia including Australia.
• Coordinate with business on training and holding of dialogue sessions with relevant customers, contractors, suppliers to ensure awareness and compliance with all HSE requirement impacting company operations.
• Ensure quality procedures are adhered throughout organisation and highlight noncompliance.
• Conduct quality check and inspection on manufacturing and installation processes pertaining to current range of products.
• Recommend quality control and inspection requirements in consultation with regional HSE and QMS whenever necessary for final review and approval by region director for implementation.
• Participate in HSE committee meetings and implement HSE procedures and standards in all workplace activities to achieve the required safety standard.
• Chair monthly QIP meeting and submit monthly quality report.

Requirements:

• Qualification in Engineering, Safety or Quality.
• Minimum 2 years of working experience in QA/QC in a manufacturing or construction environment.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

• Administration experience of Storage Arrays of multiple vendors
• Administration experience of Different Cloud platforms like AWS and Azure.
• Hitachi midrange and enterprise storage (AMS, HUS, VSP & Gx00 etc)
• Experience on AWS Cloud Specific technologies like EC2, S3, Route53, Cloud Formation, Elastic IPs, VPC, RDS and Cloud Watch.
• Configuring Elastic Load Balancers with EC2 Auto Scaling groups.
• Optimized Volumes and EC2 Instances and created multi AZ VPC Instances
• Good Understanding of AWS Elastic Block storage(EBS), various volume types and Utilization of different types of EBS Volumes based on client requirement.
• Storage performance tuning and troubleshooting.
• Incident management and change management process knowledge.
• Project handling experience from sizing to roll-out, preferably with project management background
  Strong analytical skill, very initiative, good planning & systematic execution

Job Description:

• Develop and maintain responsive web applications and user interfaces.
• Collaborate with backend developers to integrate APIs and services.
• Write clean, maintainable, and efficient code using modern frameworks and libraries.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for maximum speed and scalability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in frontend development.
• Proficiency in HTML, CSS, and JavaScript.
• Familiarity with frameworks such as React, Angular, or Vue.js.
• Knowledge of responsive design principles and cross-browser compatibility.
• Strong problem-solving skills and attention to detail.

Job Description

• Responsible for Equipment Uptime, Productivity

• Work in a cleanroom environment for long hours

• In-charge of PM planning, Equipment Maintenan

Management.

• Co-work with Engineer to resolve equipment/line

• To improve and enhance machine performance a

machine capability.

• Perform any other duties as assigned.

Job Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Elect

Mechanical), or equivalent.

• Proficiency in Microsoft Office.

• Ability to work independently as well as in a team

• Shift work required.

• At least 2 years of relevant working experience inenvironment.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: West
• Salary: Basic up to $3,600 + Allowance $100 + AWS + VB

Job Description:

• Oversee, manage, and coordinate project activities alongside a team of Engineers and Technicians to ensure successful project completion.
• Track and manage project progress to meet timelines, stay within budget, and maintain quality standards.
• Collaborate closely with consultants and clients to ensure project requirements are met.
• Conduct system programming and troubleshooting during the project implementation phase.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

We require experienced Electrical engineer that is able to

-work on board a tourist cruise boat along Singapore River

-troubleshoot and rectify electrical problems

-work independently

-familiar with AC and DC conversion

-charging of boats using shore chargers

-general works (Painting and Cleaning)

-

Job Responsibilities:

a) Assist and support the Project Management team in project execution:

• Prepare shopdrawing and design calculation report such as cable sizing and etc

• Liaise with client on technical requirements

• Liaise with consultant or authority for the approval of design

• Provide technical support and advice on design and engineering to the project team

• Assist project team with technical advice to installation team

b) Assist and support the Business Development team in tender or proposal submissions:

• Conduct site survey and prepare feasibility study report

• Perform technical assessment such as Shading analysis PVSyst simulation, consumption analysis and etc

• Prepare tender documents for submission

• Prepare costing for commercial proposal

c) Familiar with Authority requirement and IEC standard or equivalent for renewable system installation

d) Maintain and update renewable system components list

e) Assist in the development and upgrade of engineering tools

f) Provide support for team members in other regions

g) Liaising with new and existing vendors/suppliers for price lists and up-to-date product and service information with the procurement team

h) Liaise with other teams to gather feedback on design and costing for continuous improvement

i) Ad hoc task assigned by the reporting officer

Job Requirements:

• Minimum Diploma/Degree in Engineering field (Electrical engineering background would be an advantage)
• At least 2 years of working experience in renewable industry
• Proficient in engineering drawing interpretation and adept at applying requirements to design effectively
• Familiar with Autocad, PVSyst and Sketchup
• Quick learner, goal-oriented team player with strong communication and troubleshooting skills

The applicant must be:

• A Marine Engineer whose working experience will include Failure Modes and Effects Analysis for DP Equipment Class 2 and 3 vessels as a team member and independently witnessing DP FMEA Proving Trials and Annual DP Trials in the capacity of third-party surveyor.
• Familiar with IMCA DP related guidelines and with the requirements of Oil Majors, including ASOG development and implementation.
• Familiar and experienced with inspections of vessels working in the oil, gas, and renewable energy sectors.
• Willing to take on new roles such as superintendency and project management of vessel maintenance, repairs, and dry dockings.
• Willing to travel overseas and offshore when required.
• Analytical, able to work independently, results orientated, resourceful and pro-active.
• Able to independently develop competency and practice continuous professional development.

Qualification

• Degree in Electrical Engineering, Marine Engineering or equivalent.
• IMCA Accredited DP Practitioner.
• IMCA eCMID Accredited Vessel Inspector.

Experience Required

The Projects Engineering will have at least two years’ experience working with vessel Dynamic Positioning Systems (DP) as a consultant or independent verifier.

As an equal opportunities’ employer, we offer a competitive remuneration and generous benefits package, commensurate with qualifications and experience.

If you are keen to take up this rewarding opportunity and challenge, please send in your CV [email protected].

www.m3marine.com.sg

The Site Engineer (Civil) is responsible for assisting the PM on the progress of site works and manpower related aspects of the project. He/She will be required to:

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Workheads/Foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical diculties.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.

Job Description

Assisting Project Engineer with daily site activities.

Formulation of procedures for construction activities.

Attendance and contribution for prestart, internal, HSE and client meetings.

Requirements

Atleast 2 - 3 years of working experience in construction field

Degree in Civil Engineering or its equivalent

We are seeking an experienced Middleware Engineer to join our team. The successful candidate will be responsible for administering, supporting, and maintaining middleware products, including but not limited to IBM WebSphere, Oracle WebLogic, JBOSS EAP, IBM HTTP servers, Oracle HTTP servers, and IBM WebSphere MQ (WMQ). This role requires a strong technical background, excellent problem-solving skills, and the ability to work both independently and collaboratively in a dynamic environment.

Key Responsibilities:

• Administer, support, and maintain middleware products (IBM WebSphere, Oracle WebLogic, JBOSS EAP, IBM HTTP servers, Oracle HTTP servers, IBM WMQ).
• Install, configure, and maintain JBOSS EAP, IBM WebSphere Application Server (WAS), Oracle WebLogic, and IBM WebSphere MQ (WMQ).
• Assess system needs, identify appropriate changes, and make recommendations for improvements.
• Perform middleware system administration tasks, including troubleshooting, monitoring, problem resolution, system security, and change implementation.
• Plan, prepare, and apply maintenance fixes and upgrades for JBOSS EAP, WMQ/WAS, and other middleware platforms.
• Assist with high-level debugging, including heap and thread dump analysis, to support application teams.
• Provide detailed documentation for middleware installations, configurations, and administrative processes.
• Work individually or as part of a team on system projects related to UNIX, Linux, Windows, and application support.
• Provide on-call support for middleware systems as required.

Experience Required:

• 6+ years of experience managing middleware platforms, including IBM WebSphere Message Queuing, Application Server, JBOSS EAP, and Oracle WebLogic.
• Strong UNIX/Linux operating system administration experience.
• Deployment and administration of JBOSS EAP in enterprise environments.
• Experience deploying clustered, highly available middleware platforms.
• Familiarity with database integration is a plus.
• Experience with scripting languages to automate tasks is an advantage.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

· Ability to resolve machining problems appearing on parts by analysing the regular test cuts usually provided with the Maintenance literature.

· Ability to resolve machine service , Maintenance tasks of the complex nature without Technical assistance.

· Ability to resolve application problems of a normal complexity by occasionally seeking the assistance from experienced Application Engineer.

· Ability to recommend solutions to customers.

· Provide training to customers when required.

· May supervise a less experienced service on a task related to the preventive maintenance, repair and/or installation of Machine.

· Ability to perform on site audit and provide support for customer sale.

· Customer orientated and self-driven.

· Strong and dynamic leader with active listening, understanding and problem solving skills.

· Analytical approach to complex problems, ability to prioritize, reliable, and independent

To assist Design for Safety Professional to carry out following duties:

• Recognise the importance of design for safety and health of a construction project to eliminate or mitigate such risks throughout the different life cycle of a building and structure
• Recognise, and advise stakeholders on, the duties and responsibilities of DfS Professionals in accordance with relevant legal requirements and WSH (DfS) Regulations
• Prepare for DfS review meetings in accordance with WSH (DfS) regulations
• Coordinate DfS review meetings for consideration of safety and health risks during different phases in the lifecycle of a building and structure
• Apply hazard identification tools and risk assessment for DfS review meetings in accordance with organisational procedures
• Establish types of safety and health records to be kept in the DfS Register in accordance with WSH(DfS) regulations
• Coordinate the flow of relevant information to stakeholders throughout the construction project
• Familiar with Design for Safety Guidelines of MOM
• Able to work with consultant team to carry out Design for Safety Review Meetings / Workshops in accordance to GUIDE 1, GUIDE 2 and GUIDE 3 according to MOM regulations
• Prepare and Maintain Design Risk Registers
• Prepare Design Risk Register documentation and handed over to relevant parties

COTS Engineer

Responsibilities:

• Assist Business Analysts (BA) in the elaboration of user stories.
• Collaborate with Quality Assurance (QA) to develop test automation scripts and address bug fixes.
• Support DevOps in the automation of build and release processes.
• Design and deliver functional software applications that exceed customer expectations.
• Enhance software quality by employing XP (Extreme Programming) practices such as code review and unit testing.
• Adhere to the Software Craftsmanship Manifesto.
• Prepare architectural and other technical documents.

Experience and Skills Needed:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines.
• Familiarity with Git.
• Experience with Continuous Integration.
• Experience in working with agile teams, including Test-Driven Development (TDD), Pair programming, and Scrum.
• Proficiency with both Windows and UNIX/Linux servers.
• Knowledge of Design Patterns.
• Familiarity with Unit Testing.
• Strong presentation and listening skills.
• Exposure to mobile application development is a plus.
• Working experience in Agile and UX development environments is advantageous.
• Proficiency with business process modeling techniques and BPMN (Business Process Model and Notation) is a plus.
• Experience in the development of internet and intranet applications is beneficial.
• Hands-on configuration experience in administering and managing COTS (Commercial Off-The-Shelf) products and features, including but not limited to rules engine, workflow, process logic, data validations, screen flows, and page layouts with products like Salesforce, ServiceNow, Sharepoint Online, Dynamics 365, etc., is advantageous.
• Experience with designing custom objects, fields, functions, layouts, processes, or validation rules is an asset.

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

Key Responsibilities

Functional and Automation testing experience including tools such as Selenium, UFT, JIRA, Postman

• Degree in software engineering, computer engineering, electrical engineering or infocomm-related discipline

• Must have professional software quality testing experience with hands-on automation

• Strong understanding of testing techniques, risk analysis

• Strong understanding of test-driven development, continuous integration and continuous delivery

• Experience with automation scripting (i.e. Python and shell scripts)

• Experience with open-source automated testing frameworks (i.e. RobotFramework, Selenium Webdriver)

• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)

• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)

• Working experience in Agile environment will be an added advantage

• Excellent verbal communication and listening skills

• Proactive, self-driven and motivated

JOB SCOPES

1. Develop detailed designs and specifications for HVAC systems, including air conditioning, heating, and ventilation systems.
2. Create and review blueprints, schematics, and system layout.
3. Select appropriate mechanical equipment and components based on system requirements and performance criteria.
4. Coordinate with other engineering disciplines, such as electrical and structural engineers, to ensure seamless system integration.
5. Oversee the installation of HVAC systems to ensure they are installed according to design specifications and industry standards.
6. Conduct system commissioning to verify that all components are functioning correctly and efficiently.
7. Troubleshoot and resolve mechanical issues in HVAC systems to minimize downtime and ensure reliable operation.
8. Design systems with a focus on energy efficiency and sustainability.
9. Evaluate and recommend energy-saving solutions and technologies to reduce operational costs and environmental impact.
10. Ensure that HVAC systems comply with local building codes, safety regulations, and industry standards.
11. Address any safety concerns related to the mechanical aspects of HVAC systems.
12. Manage HVAC projects from conception through to completion, including budget management, scheduling, and coordination with contractors and suppliers.
13. Monitor project progress and resolve any issues that arise during the implementation phase.
14. Communicate effectively with clients, project managers, and other stakeholders to understand their needs and provide technical support.
15. Provide training and documentation for system operation and maintenance.
16. Stay updated with the latest developments and technologies in HVAC systems.

• Monitor UPS (Uninterruptible Power Supply) systems.
• Preventive & Corrective Maintenance
• Carry out or assist in preventive maintenance of UPS systems to ensure optimal performance.
• Execute corrective maintenance when necessary to resolve system faults or alarms.
• Perform additional tasks as needed to maintain the operational integrity of the UPS systems.
• Perform technical assistance for different components and systems in power management and backup solutions.
• Standby for any activation or system issues.
• Able to respond to short notice and work irregular hours to meet ad-hoc job assignments.

Requirements

• Experience in handling DC Charger/Zonal/UPS system for at least 2 years.
• Minimum Higher Nitec in Electrical Engineering
• Diploma in Electrical/Electronics Engineering or equivalent.

-Provide engineering expertise and technical assistance for installation, maintencance, troubleshooting and repairs of automatic and electrical device, loct, etc.

-Conduct scheduled, preventive and ad-hoc maintencance at customers' premises

-Attend emergency site issue and respone to sited within time frame

-Manage, prepare and maintain proper reports and records for maintenance

-Assist in other business activities as and when assigned

Requirement

-Candidate must possess at least Diploma / Advanced / higher / Graduate Diploma, Bachelor's Degree / Post Graduate Diploma / Professional Degree in Engineering (Electrical / Electronic) or equivalent.

-At least 3 Years of working experience in the related construction field is required for this position

-Preferably Junior Executive Specialized in Engineering - Electrical or equivalent

JOB DESCRIPTION (DUTIES& RESPONSIBILITIES):

We are seeking a skilled Civil Engineering Project Engineer to join our team. The successful candidate will initially focus on creating method statements using AutoCAD (ACAD) knowledge and will transition into a site engineer role to oversee project production. This position offers an exciting opportunity to contribute to the planning and execution of civil engineering projects, from conceptualization to completion.

Responsibilities:

1. Develop method statements and construction plans using AutoCAD software, ensuring compliance with project specifications and regulatory requirements.
2. Collaborate with project managers, engineers, and construction teams to develop efficient and effective construction methodologies.
3. Review project drawings, specifications, and otherdocumentation to identify potential challenges and propose solutions.
4. Prepare detailed work schedules, budgets, and resource plans to support project execution.
5. Conduct site visits and inspections to monitor progress, quality, and safety compliance.
6. Assist in the procurement of materials, and equipment as needed for project implementation.
7. Provide technical support and guidance to onsite construction teams, resolving issues and addressing challenges in real-time.
8. Communicate project updates, milestones, and challenges to stakeholders, ensuring transparency and alignment of expectations.
9. Participate in project meetings, including design reviews, progress updates, and safety briefings.
10. Transition into a site engineer role to oversee project production, including coordinating construction activities, managing resources, and ensuring adherence to project schedules and budgets.

Requrement:

Singaporean

Bachelor’s degree or above in Civil Engineering or related field

Project Engineer whom will functionas method engineer in planning phase and site engineer in operation phase.

Willingness to work night shifts; shift allowance will be provided

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

A global manufacturing firm is looking for a System Eningeer to join their team. Manage enterprise-level Windows servers for on-prem and Azure cloud and security vulnerabilities.

Your new role:

• Configure, deploy and manage on-premise Windows servers including Active Directory, DNS, group policies etc
• Monitor and optimize system performance and availability, troubleshooting and resolving issues across the Windows ecosystem.
• Implement, manage, and monitor cloud-based solutions in Azure, including M365, Azure AD, Virtual Machines, and ensure seamless integration between on-premises Windows systems and Azure resources.
• Apply knowledge of Windows security protocols to secure communications across applications and systems.
• Assess and mitigate risks associated with any security vulnerabilities, certificate management, and encryption practices.

You will need:

• Prior experience in a similar role managing Windows system and server infrastrcuture on a global scale, idealing working with IaaS and PaaS operations
• Sound technical knowledge on Windows infrastructure (e.g. Windows Server 2016/2019/2022) and Azure cloud services and best practices for hybrid environments
• Experience writing scripts for automation in powershell is preferred as is familiarity with Windows security frameworks (e.g., zero trust, CIS and more)
• Professional certifications such as Microsoft Certified: Azure Fundamentals or Solutions Architect Expert is a strong advantage

If you are interested in this role or know someone who might be suitable, please click 'Apply' to submit an updated copy of your CV or email [email protected].

EA registration No.: R1987315

Employment Agency License No.: 18C9146

• Manage daily activities on site.
• Ensure compliance with safety and regulatory standards
• Attend to customers enquiry and conduct site survey as required
• Carry out detail design and provide proposal for customers
• Assist in plan and schedules works with reference to contractual schedules
• Coordinate goods delivery with suppliers and store as required
• Attend to all operational matters related to the daily running of the project
• assist in Liaising with customers concerning approval of plans and drawings, acceptance of work, progress of work, problem solving, etc.
• Attend site meetings and inspections, report regularly on progress and monitor schedule
• Prepare monthly project report to the Project Engineer / Customers
• Co-ordinate with customers to handover completed project with project documents
• Help improve efficiency and reduce costs
• Compile and maintain project documentation

Key Responsibilities

Functional and Automation testing experience including tools such as Selenium, UFT, JIRA, Postman

• Degree in software engineering, computer engineering, electrical engineering or infocomm-related discipline
• Must have professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques, risk analysis
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Experience with automation scripting (i.e. Python and shell scripts)
• Experience with open-source automated testing frameworks (i.e. RobotFramework, Selenium Webdriver)
• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage
• Excellent verbal communication and listening skills
• Proactive, self-driven and motivated

Responsibilities

• Lead/involve in development and maintenance of the software for automated equipment
• Direct/involve in the coding, testing and debugging of the developed software
• Lead team to maintain, review and improve legacy code
• Help to define architecture of new design and write technical document to address the design
• Liaise with customer on requirements and create specifications

Requirements

• Degree/diploma in Electrical/Electronic engineering/Computer science or related discipline
• 2 years and more of experience in the automation industry
• Proficient in Visual C# programming with WinForm application.
• Relevant experience in building web applications in JavaScript, HTML and CSS will be an added advantage
• Familiar with Modbus, EtherCAT fieldbus protocols, Winsock and serial communications.
• Familiar with PLC programming (e.g. Omron) and various motion systems (e.g. IAI, ADLink)
• Willing to learn and adapt to new technology quickly
• Ability to work independently and in a team with a can-do working attitude
• Must be able and willing to travel and work at customer sites