Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Responsibilities:

· Coordinating, planning and conducting the project plan

· Project formulation and monitoring progress and schedule

· Effective communication and co-ordination between project participants

· Attend site meeting, inspect, monitor and report project progress.

· Submit and update monthly project status

· Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

· Degree in Civil/Structural Engineering or its equivalent

· At least 3 years relevant working experience as Project Engineer in main contractor office

· Proficient in MS Office Word, Excel and Project Scheduling software

· Bilingual with good communication skills

• Expertise in configuring, customizing, and integrating payment engines such as Global PayPlus (GPP), Finastra, and familiarity with API-based payment solutions.

• Synthesize intricate high-level requirements into actionable, product-specific deliverables. Drive gap analysis within payment systems, particularly for Global Pay Plus (GPP) engines, and leverage technical depth to integrate API-driven solutions for seamless global deployments.

• Navigate intricate vendor relationships, guiding them through RFPs and the selection of payment solutions, particularly for advanced capabilities like Virtual Account Management.

• Oversee sanctions compliance and payment risk mitigation strategies, ensuring all systems adhere to the most stringent global compliance standards.

Description

• Expertise in configuring, customizing, and integrating payment engines such as Global PayPlus (GPP), Finastra, and familiarity with API-based payment solutions.
• Synthesize intricate high-level requirements into actionable, product-specific deliverables. Drive gap analysis within payment systems, particularly for Global Pay Plus (GPP) engines, and leverage technical depth to integrate API-driven solutions for seamless global deployments.
• Navigate intricate vendor relationships, guiding them through RFPs and the selection of payment solutions, particularly for advanced capabilities like Virtual Account Management.
• Oversee sanctions compliance and payment risk mitigation strategies, ensuring all systems adhere to the most stringent global compliance standards.

We seek a highly skilled and experienced Facility Engineer to oversee the maintenance and operations of our facilities. You will play a crucial role in ensuring functionality, safety, and compliance while leading our maintenance team. The ideal candidate will have a strong technical background in mechanical or electrical disciplines and extensive experience in facility management and supervision. Proficiency in English and Mandarin, along with excellent communication and negotiation skills, is essential for liaising with contractors, local authorities, and stakeholders.

RESPONSIBILITIES

· Oversee the maintenance and repair of facility systems, equipment, and infrastructure.

· Supervise contractors, including negotiating pricing, scheduling, and quality control.

· Ensure compliance with local codes, safety regulations, and environmental standards.

· Prepare reports on maintenance activities, budget expenditures, and project progress.

· Serve as the primary contact for local authorities, obtaining permits, and ensuring regulatory compliance.

· Develop and implement emergency response procedures.

· Lead and mentor the facility maintenance staff, providing guidance and training.

JOB REQUIREMENTS/QUALIFICATIONS:

· Diploma in Mechanical or Electrical discipline or certification in facility management.

· Minimum of 5-7 years of experience in facility management, with supervisory roles.

· Proficiency in English and Mandarin, with strong communication skills.

· Ability to write reports, plan schedules, negotiate prices, and supervise contractors.

· Familiarity with local codes, safety regulations, and environmental standards.

· Class 2 or 3 driving licence required for travel to various facilities.

ATTRIBUTES:

· Ability to lead and motivate teams, fostering accountability and teamwork.

· Strong analytical and problem-solving skills.

· Flexibility to adapt to changing priorities and deadlines.

· Meticulous attention to detail for accurate documentation and compliance.

· Excellent organisational skills to manage multiple tasks and projects.

· Clear and effective communication skills for conveying technical information.

Responsibilities:

• Prepare, schedule, coordinate and monitor the assigned engineering projects
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications
• Interact daily with the clients to interpret their needs and requirements and represent them in the field
• Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status
• Assign responsibilities and mentor project team
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support
• Review engineering deliverables and initiate appropriate corrective actions

Requirements:

• Proven working experience as a Project Engineer
• Excellent knowledge of design and visualisations software such as AutoCAD
• Advanced MS Office skills
• Familiarity with rules, regulations, best practices and performance standards
• Ability to work with multiple discipline projects
• Project management and supervision skills
• Decision making ability and leadership skills
• Current engineer license
• Time management and organization skills
• BS degree in Engineering or relevant field

JOB DESCRIPTION

• Manage projects from conception to completion, including planning, budgeting, and coordinating with cross-functional teams.
• Conduct thorough testing and inspection of mechanical systems to ensure they meet performance and safety standards.
• Provide technical support and expertise to production and maintenance teams, troubleshooting and resolving mechanical issues.
• Prepare detailed reports, technical drawings, and documentation for all projects and maintenance activities.

JOB REQUIREMENTS

• Diploma in Mechanical Engineering or in a related field.
• Must have minimum 2-3 years of electroplating experience
• Minimum 3 years experience in mechanical engineering, preferably in the Oil & Gas, Marine, or Industrial sectors.
• Proficiency in CAD software (e.g., AutoCAD, SolidWorks) and other engineering design tools.
• Strong analytical and problem-solving skills with the ability to troubleshoot problem.
• Excellent verbal and written communication skills.
• Ability to work collaboratively in a team environment, as well as independently when required.

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

Responsibilities:

• Overseeing the preparation, scheduling, coordination, and supervision of assigned engineering projects.
• Ensuring compliance with project requirements, reviewing drawings for accuracy, and addressing technical inquiries.
• Engaging with clients to understand and interpret their needs (including site surveys and data gathering).
• Participating in project meetings and implementing follow-up actions.
• Developing detailed work schedules, manpower allocation, and resource planning.
• Reviewing engineering deliverables and initiating corrective measures as needed.
• Managing project changes, identifying potential crises, and creating contingency plans.
• Conducting quality control assessments and overseeing project handover.
• Providing regular project status updates to both internal and external stakeholders.
• Facilitating coordination among various parties—clients, consultants, subcontractors, vendors, design, sales, production, warehouse, site leader and purchasing teams—to ensure a seamless project handover.
• Reviewing engineering drawings and collaborating with the design team to resolve any discrepancies.
• Carrying out additional tasks as assigned by the reporting manager.

Requirements:

• A minimum of 2 years of experience in construction (civil, structural, geotechnical, mechanical, or electrical work) would be an advantage.
• Degree in engineering, architecture, or building science.
• Ability to understand technical drawings, specifications, and requirements.
• Proficient in MS Office and skilled in preparing PowerPoint presentations.
• Strong interpersonal, written, and verbal communication skills for collaboration with stakeholders at all levels.
• Open to Fresh Graduates

Company Overview:

3SI Pte Ltd is a leading security systems integrator specializing in the design, installation, and maintenance of advanced security solutions, including CCTV and card access systems. We are committed to delivering high-quality, reliable security solutions to meet the diverse needs of our clients.

Position Overview:

The Systems Engineer is responsible for the design, implementation, and maintenance of integrated security systems, focusing on CCTV and card access systems. This role involves working closely with clients, project managers, and installation teams to ensure that systems are delivered on time, within budget, and to the highest standards of quality.

Key Responsibilities:

1. System Design and Implementation:

- Develop detailed designs for integrated security systems, including CCTV and card access control systems.

- Configure and program system components to meet specific project requirements.

- Oversee the installation and commissioning of systems to ensure they function correctly and meet client expectations.

2. Technical Support and Troubleshooting:

- Provide technical support to clients and internal teams for installed systems.

- Diagnose and resolve hardware and software issues related to security systems.

- Perform regular maintenance and updates to ensure optimal system performance.

3. Project Coordination:

- Work with project managers to develop project plans, timelines, and resource requirements.

- Coordinate with installation teams to ensure projects are completed on schedule.

- Communicate regularly with clients to provide updates and address any concerns.

4. System Testing and Quality Assurance:

- Conduct thorough testing of installed systems to ensure they meet functional and performance standards.

- Identify and address any issues or deficiencies in system performance.

- Document test results and provide feedback for continuous improvement.

5. Documentation and Reporting:

- Maintain detailed records of system configurations, installations, and maintenance activities.

- Prepare technical documentation, including system diagrams, user manuals, and training materials.

- Provide regular reports to management on project status, system performance, and technical issues.

6. Training and Support:

- Train clients and end-users on the operation and maintenance of installed systems.

- Develop and deliver training sessions for internal teams on new technologies and best practices.

- Provide ongoing support and updates to clients as needed.

7. Compliance and Safety:

- Ensure all work complies with industry standards, codes, and safety regulations.

- Follow company policies and procedures for safety and security.

- Stay up-to-date with the latest industry trends and technological advancements.

Qualifications:

- Education: Bachelor’s degree in Electrical Engineering, Computer Science, Information Technology, or a related field is preferred.

- Experience: Minimum of 3 years of experience in designing, installing, and maintaining security systems, including CCTV and card access systems.

- Certifications: Relevant certifications such as CCNA, CompTIA Security+, or manufacturer-specific certifications are a plus.

Skills:

- Strong knowledge of security systems, including CCTV and card access control.

- Proficiency in network and IT infrastructure as it relates to security systems.

- Excellent problem-solving and troubleshooting skills.

- Ability to read and interpret technical diagrams and specifications.

- Strong communication and customer service skills.

- Physical Requirements:

- Comfortable working at heights and in confined spaces.

- Valid driver's license and ability to travel to client sites.

Work Environment:

- Combination of office, client sites, and fieldwork.

- May require working outside regular business hours to meet project deadlines or resolve urgent issues.

Benefits:

- Competitive salary

- Health, dental, and vision insurance

- Paid time off and holidays

- Professional development opportunities

- Company-provided tools for fieldwork

Application Process:

Interested candidates should submit their resume and a cover letter outlining their qualifications and experience to [email protected]

3SI Pte Ltd is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Roles & Resonsibilities

1. Attending site meetings.

2. To co-ordinate and correspond with suppliers and consultants.

3. Supervision and quality checking.

4. Manage and ensure workers in compliance.

5. Send workers to/from project site/office/dorm daily basis.

6. Arrange Materials and Manpower of Projects.

Requirements:

1. Mininum Degree in Civil Engineering or related education diploma

2. Certificate in Managing Work at Height Course (MWAH) and Certificate in Assess Confined Space for Safe Entry and work is a plus.

3. Mininum 9 year related working experience in Singapore is a must.

4. Class 3 driving license.

5. Good interpersonal, analytical and high level of problem-solving skill

6. Able to work independently.

7. PC Skill

8. Long Working Hour, night shift might be required

(A) Primary Function

1. Responsible for all engineering related activities of the product line concerned.

2. Responsible for quality of products at all stages and drive production yield.

3. Identify and initiate actions to prevent occurrence and recurrence of product, process, quality systems nonconformities.

4. Work as a team with all departments to achieve mutual agreement on specification required by customers.

5. Ensure all products meet the standard cycle time and minimise machine and mold down time.

6. Implement improvement plans to enhance efficiency of process, material and manpower.

7. Responsible for new RFQ enquiry and advise the management the feasibilities for mass production.

8. Responsible for resolving discrepancies and technical issues related to product with customers.

(B) Duties and Responsibilities

1. Establish optimum process parameters and meeting specific cycle time for new product.

2. Analyze defect reported in-house and customer with quality, tooling and production.

3. Responsible to test and qualify all new molds by applying systematic molding that includes Load Senstivity Test, Viscosity/Shear Rate Test, Gate Freeze Test, Thermal Mapping of Mold, Short Short Test etc.

4. Must perform DOE on molding process parameter for process window study.

5. Attend to all daily quality and process related issues.

6.Prepare and execute process validation protocols and reports for new and existing products with tooling and quality personnel for all customers.

7. Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.

8. Perform internal quality system audit.

9. Train and assess production staff on processes as well as WI as and when required.

10. Attend routine production and quality meetings.

11. Execute engineering change notice from customer/ in house and update ERP system promptly.

12. Compliance to all regulatory and in house system requirements especially for medical and automotive customers.

C) Qualifications / Requirements

1. Degree/Diploma in Engineering-related discipline, preferably in Polymer and Plastic technology, Mechanical.

2. At least 3 years related experience/knowledge in Plastic Injection Molding, preferably in medical and automotive industries.

3. Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ.

4. Possess strong leadership, positive attitude, analytical and good interpersonal skills.

5. Results-oriented, meticulous and a self-motivated team player.

Service Engineer

We are at the heart of every place that matters: as a leading global provider in the access solutions market, we enable people to move seamlessly in safe, secure and sustainable places.

Do you want your work to matter? Then join our team!

At dormakaba, more than 16,000 people from all over the world work together and grow together. If you are looking for exciting career prospects, if you want to fuel innovation and like tackling new challenges, then we would love to hear from you!

Our Singapore Service team is always on the lookout for talents and help you reach your best potential!

Role & Responsibilities

· Provide customer support for our Company’s products such as handling their enquiries with tact and courtesy.

· Perform on-site advice, installation, preventive maintenance and repairs of our Company products.

· Offer aftersales solutions and training to customers on product features, configuration, usage and maintenance.

· Proactive in informing customers of additional product and services we offer.

· Handle all essential resources, materials and equipments for effective and efficient delivery.

Key Competencies

· Good level of customer service experience.

· Good communication skills to enable interaction with internal and external customers.

Qualification:

· NITEC/ Diploma in IT/Engineering/Electrical/Mechanical/Computer-related or equivalent discipline.

· Candidates without prior working experience are welcome as on-the-job training will be provided.

· Possess a valid Singapore Class 3 Driving License.

Benefits:

· Learning culture where every employee is engaged in learning and development growth.

· Team programs and activities that celebrate individual and team’s success.

· Long service award recognition for our committed and dedicated colleagues.

· Health insurance and flexi-benefits cater for the employee’s health and wellness.

Is this you? Access your career at dormakaba today!

Diversity, Equity & Inclusion is part of our overall business and sustainability strategy. We consider all applicants equally throughout the whole recruitment process without regard to culture, age, ethnicity, gender identity, disability, marital status, language, national origin, physical/ mental ability, religion, sexual orientation, socio-economic status, underrepresented communities, etc. We do not use unfair selection methods for any of our positions, all employees are appointed based on performance and suitability for the role

Key Responsibilities:

• Design and implement network architectures for LAN/WAN/Wireless
• Configure and deploy routing protocols (OSPF, EIGRP, BGP).
• Implement switching protocols (STP, MSTP, VLANs).
• Design and implement network security measures (firewalls, ACLs, VPNs).
• Support, Configure, Maintain and Upgrade corporate customer’s network devices
• Ensure network security and connectivity
• Monitor network performance (availability, utilization, throughput and latency)
• Incident/Problem/Change/Service Request/Configuration Management.
• Create and maintain technical documentation (network diagrams, configurations).
• Assist in network design and implementation.

Experience:

• 8 - 10 years of experience in supporting, configuration, maintenance, and upgrading corporate customer’s network devices.
• CCNP certified (Routing and Switching).
• Good understanding and hands-on experience of networking protocols like routing and switching and Wireless (Physical experience in data centres for all Network devices/equipment).
• Experience in Firewall configuration and network security policy implementation. Hands-on experience on FortiGate/Cisco/Palo Alto/Aruba/ Huawei is desirable.
• Experience in debugging and fixing technical problems in network by coordinating with vendors, data centre and onsite support teams whenever required.
• Have experience in creating network documents and flow diagrams.
• Hands-on remote access and site to site VPN.
• Experience in monitoring tools like solar wind, NMS, Wireshark, MRTG Cacti etc.
• Knowledge of Windows, Linux and Load Balancer will be added advantage.

Why Join Us?

• Attractive Newcomer Bonus
• Saturday work allowance
• Career Progression & Development Opportunities
• Opportunity to Work Alongside an Innovative Team
• Comprehensive Leave Packages (e.g: additional leave, birthday leave, eldercare leave, marriage leave & gift, etc...)
• Annual Executive Health Screening

Job Responsibilities:

• Assist Project Manager on project matters.
• Coordinate with subcontractors, supervisors and clients on site matters.
• Execute, monitor and ensure the project completed on time.
• Maintain work quality according to specification and requirement.
• Check drawing for accuracy and completeness for construction.
• Maintain inspection records of works, materials and all completed works.
• Implement cost control measures to meet project budget.
• Ensure the site operations comply with project quality plan, environmental and occupational safety and health.
• Ad-hoc duties as assigned by superior(s).

Job Requirements:

• Degree in Civil Engineering or equivalent; certification must be recognized by PE Board
• Has experience in infrastructure projects, e.g. roads and rail projects
• Possess skill, knowledge and ability to supervise and manage project effectively
• Independent, resulted-oriented and self-driven team player with good communication skills

• Possess a recognized degree in Civil Engineering with at least two years of relevant
• experience in building projects.
• Possess the full knowledge and experience in organizing, managing and executing C&S
• works.
• Able to comprehend all technical elements, such as BIM, drawings and specifications.
• Perform construction planning, coordinate with the client, sub-contractors, consultants
• and Authorities on all project aspects.
• Develop detailed work plans and cost estimations for a practical forecast of cost and
• workforce requirements.
• Assist Project Manager in preparation of reports.
• Lead, coordinate and manage civil and structural works of a project.
• Prepare, monitor and review site work programs.
• Plan and schedule the works and resources for a project.
• Lead and resolve all on-site technical and engineering matters.
• Ensure that the works are performed to meet the company’s ISO standards and contractual requirements.

Roles & Responsibilities

Official working hours: 5 Days

Salary: Basic $3000 - $5000 plus Overtime

Working location: Tuas or Site

• To carry out inspection, troubleshooting & repair of marine equipment such as hatch cover, winches and crane on site.
• To carry overhauling of marine equipment or components in workshop, such as winches, cylinders , motor.

Requirements

We are looking for an experienced Hydraulic/Mechanical Service Engineer who capable to work in marine industry.

• Nitec, Diploma or Degree in Mechanical or Electrical Engineering or equivalent
• At least 1 years working experience in Mechanical, Hydraulic, Electrical, Marine, or heavy engineering Industry. Preferably with service and troubleshooting skill.
• Capable in mechanical and hydraulic and mechanical troubleshooting.
• Good coordination skill and capable to supervise repair team at shipyard and during vessel repair.
• Positive attitude and able to work under pressure to complete work within timeframe.
• Eager to learn and good team player.
• Capable to prepare service reports and able to communicate well with colleague, customer and contractor.
• Willing to work overtime and travel overseas for short period.

• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Design systems and components that meet needs and requirements
• Produce outline designs
• Conduct experiments methodically, analyse data and interpret results
• Test and evaluate theoretical designs
• Identify, formulate and produce effective solutions to emerging problems
• Evaluate final product’s overall performance, reliability and safety
• Alter and modify design to meet requirements and to eliminate malfunctions
• Estimate budget and scope of project
• Solicit observations from operators
• Prepare product reports and documentation
• Engage in lifelong learning and develop new theories or methods

Job Description & Requirements

1. Preparation of shop drawing

2. Preparation and submission of necessary document prior to start boring work

3. Supervise in confirmation of soil boring and rock caring. And submissio0n of pile length calculation (if required)

4. Co-ordination with main contractor and consultant’s representative.

5. Preparation and submission of bored pile installation record

6. Supervise and arrange the site team & progress thereafter report to project manager

7. Preparation of bored pile summary and submit to main contractor and HQ

8. Submission of as built pile penetration and eccentricity drawing

9. Receiving the time to time instruction of project manager

Job Duties:

• Maintain 5S & Safety in Laboratory, plan and deliver services to meet the local and regional business plan objectives
• Technical report preparation and authorization and provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Provide onsite project leadership and testing execution while ensuring development and training of junior staff
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing, possess the ability to oversee standard and/or routine technical problem solving activities and able to interact with customers on technical issues and questions
• Provide Input and support on business development opportunities with new or existing customers and be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory
• Carry out crucial examination and implementation of testing concepts and data, utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions
• Ensure that tests assigned to the technicians are performed in a timely manner in accordance with validated test protocols and procedures; give training to the technicians as required, upkeep test reports and related records and ensure equipment and testing meets the requirement of ISO/IEC 17025
• Maintain and upkeep test facilities and laboratory equipment, assist with hazard identification and risk assessment exercises within their areas of responsibility and monitor day-to-day health and safety in their section of responsibility and ensure all hazards, near misses and accidents are reported

Job Requirements:

• Working knowledge of laboratory safety
• Possess a Degree in Civil Engineering or Materials Engineering major or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic / professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory and be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelor Degree in Materials Science, Materials Engineering or Civil Engineering
• Have a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business and working knowledge of laboratory safety
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Description & Requirements

Job Summary:

We are looking for a highly skilled High Voltage/Medium Voltage Engineer to join our team. The ideal candidate will be responsible for the design, development, maintenance, and troubleshooting of high voltage and medium voltage systems in offshore substations. This role requires extensive knowledge of electrical engineering principles, offshore operations, and safety regulations.

Responsibilities:

• Design and Development: Collaborate with the system supplier to design and develop HV/MV systems and equipment (Electrical, Protection & SCADA) for offshore substations.
• System Analysis: Familiar with Electrical calculations and system analysis to determine specifications and ensure optimal performance to meet client requirements.
• Compliance: Ensure all HV/MV systems comply with relevant safety standards and regulations.
• Inspection and Testing: Perform regular inspections, conduct factory testing and support in field commissioning to assess the technical compliance and performance of HV/MV equipment.
• Troubleshooting and Technical Support: Diagnose and provide technical support in resolving technical issues on HV/MV systems and guidance to junior engineers and technicians.
• Collaboration: Work closely with other engineers, technicians, vendors and regulatory bodies and clients to address and solve problems related to HV/MV systems.
• Documentation: Prepare detailed reports, system architecture diagrams, purchase specifications, functional description and control philosophy to document system designs, construction, modifications, and maintenance activities.
• Preventative Maintenance: Collaborate with the system supplier to develop and implement preventative maintenance procedures for HV/MV systems to ensure safety and performance.

Requirements:

• Education: Minimum bachelor’s degree in electrical engineering or related field.
• Experience: At least 3 ~ 5 years of relevant experience in high voltage or medium voltage engineering, preferably in an offshore environment.
• Skills: Strong analytical and problem-solving skills, excellent communication and teamwork abilities, proficiency in using electrical design software.
• Certifications: Relevant certifications in high voltage or medium voltage engineering are a plus.
• Knowledge: In-depth knowledge of electrical engineering principles, high voltage systems, offshore operations, and safety regulations.
• Innovation: Ability to stay up to date with the latest advancements and best practices in HV/MV engineering.
• Leadership: Capability to lead and mentor junior engineers and commitment to safety.
• Adaptability: Ability to work as a team in challenging offshore environment and possess good planning, organizational, interpersonal skills with adaption to ever-changing