Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

• Attend to Client’s site surveys, meetings and maintain constant contact/communication regarding project works (In progress and new)
• Work closely with the drafting department to come out with preliminary design (for client’s approval), material take off and cost estimation for the new potential projects
• Carry out cost estimation and prepare quotation for clients
• Overall in charge of project’s delivery schedule, cost control, quality and safety (i.e. ensure that projects are carried out within budget, schedule and with zero rework and safety incident)
• Prepare Risk Assessment for Clients review and approval prior to work start
• Check and ensure proper documentation (such as test packages, as-built drawings etc) are in place prior to project close up
• Ensure overall safety well being of workers in the workshop as well as the on site during project execution
• Attend and participate all Safety Meetings organized by Clients

• Perform maintenance, repair or overhaul of Air compressor efficiently and complete them in a timely manner.
• Guide and lead the team of technicians who lack experience or knowledge in troubleshooting, diagnostics and best practices in the said operation.
• Write and submit Service Reports timely in clear and logical manner.
• Communicate with Service Manager, Sales Department and Customers on job related issues, recommendations, unforeseen problems and to identify potential risks to the team and/or the equipment or job.
• Ensure safety observances on site both for self and team and highlight safety risks to Manager.
• Accountable for the upkeep of equipment and tools used as well as proper housekeeping of your work surroundings.

Job Qualifications:

• High competency in the operations, maintenance and repair of major Air Compressor brands (Oil lubricated screw and Oil Free) such as Atlas Copco, Ingersoll Rand, Kobelco etc.
• Familiar with the operations, maintenance and repair of Air treatment equipment like Air Dryer and Filter.
• Knowledge of Vacuum pumps, blowers or other rotating equipment such as pumps is a plus.

Responsibilities:

• Assist in managing the end-to-end new hire induction experience.
• Schedule and coordinate meetings, and prepare minutes that capture all the important details.
• Track and monitor key tasks and top talent.
• Support performance management implementation.
• Consolidate monthly reports and track data.
• Upkeep organizational charts and appointments.
• Take on ad hoc duties with enthusiasm and a can-do attitude, always ready to lend a helping hand.

Requirements:

• A minimum of a Diploma or equivalent, with a strong foundation in administrative tasks.
• Proficiency in Microsoft Office Tools, especially MS Excel and PowerPoint, to handle data and create reports with ease.
• A team player with excellent communication skills, capable of interacting with people at all levels and building strong working relationships.

Job Description

• Provide administrative and contractual support and maintain all required project information throughout each project for claim purposes to ensure that the claim data are up-to-date and comprehensive.
• Verify the accuracy of survey data, including measurements and calculations conducted at survey sites.
• Consult with clients, vendors, personnel in other departments or construction foreman to discuss and formulate estimates and resolve issues.
• Prepare progressive claims and potential variation claims at regular intervals of the project.
• Able to read drawings and take out the quantity , prepare tender
• Maintaining proper documentation of correspondence from contract award to job completion to ensure all relevant claims are lodged accordingly to the client timely.
• Ensure proper closing-out of project account finalization.
• Able to draft letter to client or contractor for contractual issues

Job Responsibilities

• Possess a Civil Engineering Degree or equivalent
• Able to do Tender
• Proficient in using AutoCAD
• Familiar with sketchup and able to make 3D proposal for projects
• Preferably with 2 years of relevant working experience

Job Responsibilities

• Take full responsibility for conducting all necessary field surveys, from initial site reconnaissance and boundary identification to final as-built documentation.

• Establish and maintain control points and site benchmarks, ensuring their integrity throughout the construction process.

• Lead the execution of topographic and as-built surveys to capture essential data.

• Take charge of site layout by performing accurate setting out and marking of all structural and infrastructural elements such as roads, buildings, utilities, and earthworks.

• Leadership role in managing and guiding the surveying team, including junior surveyors and chainmen.

• Act as the primary liaison between the survey team and project engineers, contractors, and stakeholders.

• Oversee the collection, processing, and interpretation of survey data using tools like total stations (Sokkia, Leica), and AutoCAD. Prepare and present comprehensive survey reports that inform key project decisions.

• Take ownership of identifying and resolving on-site issues, such as site discrepancies, inaccuracies in setting out, or conflicts between design plans and site conditions.

• Implement strict quality control protocols to ensure the accuracy, reliability, and legal compliance of all surveying tasks.

Job Requirements

• Proficient in using common total stations (Sokkia, Leica)

• Min 1 year experience in land surveying. At least 3 year(s) of working experience in the related field is required for this position.

• Experience with computer-aided design tools, such as AutoCAD Civil 3D software

• Proficient in Math and cartography skills

• Written and verbal communication skills

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Engineering (Civil) or equivalent

A construction engineer is a civil engineer who oversees the design and construction of large building projects and works closely with architects and structural engineers to interpret building design plans and ensure that the project meets certain safety requirements.

A construction engineer is a civil engineer who oversees the design and construction of large building projects and works closely with architects and structural engineers to interpret building design plans and ensure that the project meets certain safety requirements. While they don't have direct involvement in the construction process, they're still responsible for ensuring that the process adheres to the proper construction standards and specifications. They manage multiple aspects of a construction project, including its budget and risk management processes. The infrastructure projects construction engineers assist with might include commercial or residential properties, roads, dams, bridges and airport runways.Related: What Is Construction Engineering?

What does a construction engineer do?

A construction engineer assists with construction projects to ensure that teams build in accordance with the proper plans and specifications. They also help maintain and repair infrastructure systems, such as roads, dams, water supply systems and buildings. They work with engineers and construction crews to organize and complete projects. Some of their additional responsibilities might include:

• Developing construction project budgets, ordering materials and collecting and organizing resources and personnel, including structural engineering employees, tools, machines and physical materials
• Operating machinery and using tools to design complex structures like hydraulic systems and using computer software to plan and design projects and conduct risk analyses
• Overseeing building progress and enforcing safety regulations at construction sites and submitting building permits to the proper authorities
• Assessing the viability and potential risks associated with a construction project

• Oversee and direct construction projects from conception to completion
• Review the project in-depth to schedule deliverables and estimate costs
• Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations
• Coordinate and direct construction workers and subcontractors
• Select tools, materials and equipment and track inventory
• Meet contractual conditions of performance
• Review the work progress on daily basis
• Prepare internal and external reports pertaining to job status
• Plan ahead to prevent problems and resolve any emerging ones
• Negotiate terms of agreements, draft contracts and obtain permits and licences
• Analyse, manage and mitigate risks
• Ensure quality construction standards and the use of proper construction techniques

1.Manage store Inventory & handle sales cash.

2.Receive ,distribute and maintain adequate quantities of stock at all times.

3.Maintain optimal stock levels.

4.Maintain stock and consumption records.

5.Check incoming materials for quality against invoices,purchase orders and packing slips or other documents.

6.Make clear notes on the receipt of the items against eash invoice.

7.Keeps and updates records of good received and issued.

8.Complies report of expenditure,and monthly stock report.

9.Perform related duties and responsibilities as assigned.

• Preparing / catering of all necessary documents for submissions.
• Processing work orders, delivery orders,paperwork, etc.
• Monitoring and managing all phases of projects development and schedules.
• Coordinate and building good rapport with the clients.
• Ensure proper tracking and reporting of projects development.
• Work as assigned.

Job Requirements:

• Preferably 3 years experiences in construction field
• Proficient in microsoft wors,excels.

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Hunter role need to exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. Diploma Holder in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal hunger for success and communication skills

· Initiative and results driven

· Entry level candidate are welcome

• Conceptualization and design of facades, including preparation of drawings and structural calculations.
• Delivery of technical presentations.
• Coordination with clients, architects, consultants, façade contractors, suppliers, and other project team members.
• Supervision of construction, site inspections, and training of constructors.
• Preparation of technical submissions, proposals, and documentation.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

Our company is looking for a Quality Assurance / Management Representative who will perform the following tasks:

• Manage the company's ISO9001:2015 and ISO45001:2018 systems by leading both internal and external audits.
• Monitor and analyze the company's quality and safety performance through the action plans in place.
• Keep abreast of the government requirements as well updates on the standards to ensure compliance of the company's systems and policies.
• Ensure that all statutory licenses, certificates, and inspections of the company's equipment and machinery are valid and up to date.
• Manage and monitor the company's measuring equipment and devices to ensure that they are calibrated as per the required standard of the products.
• Liaise with all external stakeholders such as government bodies (MOM, BCA, SCDF, etc) with regards to company's operation and compliance.
• Communicate with existing customers on their regular audits, non disclosure agreements, and additional requirements which may affect the company's status of being an approved vendor.
• Assist project engineers in securing Certificate of Origin (COO) and / or Preferential Certificate of Origin (PCO) for products.
• Analyze the applicable tariff to be applied for free trade agreement (FTA) purposes.

Class 4 and class 5 driver required for construction company.

Minimum 1 year experience in handling hook truck or vaccum tanker.

Immediate

Location Tuas South

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

We're Hiring: Project Coordinator for Renovation Projects

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Assisted the manager in the day-to-day operations of the production lines.
• Plans and coordinates the workflow on the production lines to achieve production targets according to agreed-upon schedules and quality standards.
• Draws up a duty roster for operatives, allocating work and arranging replacements for absentees.
• Troubleshoots production problems that may arise and assists the Production Manager in planning new project work, such as positioning new production lines or machinery.
• Trains motivates and guides subordinates maintains discipline among the operatives, and provides input to their performance appraisals.
• Report directly to the Assistant Production Manager / Production Manager.
• Champions cost-saving ideas through implementation.
• Establish work standards/workflow to comply to stipulated and safety requirements.
• Any other tasks as and when assigned by the management.

REQUIREMENTS:

• Minimum 2 years experience in the relevant position
• Possess good communication skills and good time management
• 5s experience will be an advantage
• Able to start work on short notice

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Understanding Client Needs - Dive deep into understanding our clients’ goals and preferences, ensuring that our marketing efforts align perfectly with what they’re looking for.
• Analyzing Data - Keep an eye on the numbers! You'll track campaign performance and client engagement to see what’s working and what can be improved.
• Collaborating with the Team: Work closely with our consultants to ensure that our marketing strategies align with their client interaction and advice.
• Bringing Fresh Ideas - We love innovation! Share your creative ideas and help us stay ahead of the curve in the financial consulting world.
• Assisting with Events - Help organize and promote webinars, workshops, and other events that showcase our expertise and connect with potential clients.
• Handling Client Feedback - Gather and analyze client feedback to refine our marketing approaches and improve client satisfaction.
• Managing Budgets - Assist in managing and allocating marketing budgets to ensure resources are used effectively.
• Reporting and Metrics - Prepare regular reports on marketing activities and client engagement, providing insights and recommendations for continuous improvement.

Candidate Requirements on the lookout:

• Masters in business administration degree in a related field: We value relevant experience and a proactive attitude just as much. Fresh graduates are welcome.
• Passion for Marketing: A genuine interest in marketing and how it can be used to attract and retain clients.
• Strong Communication Skills: Whether it’s writing engaging content or collaborating with team members, your communication skills are top-notch.
• Creative Thinker: You should bring fresh perspectives and innovative ideas to the table.
• Heart to Serve: We're looking for someone who loves meeting new people and adds value to their day-to-day experiences. If you’re passionate about making meaningful connections and enhancing the lives of those you interact with, we'd love to hear from you.
• Detail-Oriented: We’re looking for someone who pays attention to the small stuff and ensures everything runs smoothly.
• Tech-Savvy: Familiarity with marketing tools and platforms, including social media and analytics tools, is a must.
• Open to Career Opportunities: We have various positions available so this role can be your opportunity and stepping stone to a stable career in finance.
• Team Player: We’re a close-knit team, so being able to work well with others is key to your success here.

Roles & Responsibilities

· Overall responsible for the sites’ maintenance and provide strong technical stewardship in various disciplines

· Provide strategic guidance in sourcing & contract management, operations & maintenance and resource & cost sustainability

· Manage multiple stakeholders, including vendors and customer

· Forge win-win partnerships with tenants’ shopfloor/ frontline operations.

· Grow and develop the in-house technical expertise

· To coach and train the team so that they are familiarized and knowledgeable of the requirements

· Ensure all projects and maintenance works are carried out according to the schedule planned

· To take charge and lead the in-house maintenance team in all daily facilities maintenance issues

· Supervise and manage contractors in fulfilling their contractual obligation and ensure smooth operation of the buildings

· Attend to feedback by tenants/ clients, to recommend and take remedial actions in a timely manner

· Promote good relations with our staff, contractors and management

· Prepare quotation for service as required

· Any other ad-hoc assignments assigned by the Management.

Requirements

· Minimum 0 years of experience in related functions

· Has good knowledge of operations support

· Good communication skills (written and oral)

· Pro-active manner, willing to offer new suggestions and share

· Proficient in Microsoft Office/Excel

· Agile, innovative, meticulous, self-driven with a keen eye for details

· Team player, hands-on and with a positive attitude

· Strong interpersonal skills, and able to manage and work with various stakeholders

· Able to multitask and perform under pressure to deliver