• Experienced in the design of water treatment plants (desalination, potable water, recycle water), wastewater treatment plants (municipal and industrial) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S, Piping & Systems/Skids Engineering and Drafting) on development of engineering deliverable on a timely basis.

• Reviewing and providing input to project schedule and ensure all planned dates and progress are realistic. Provide updates on engineering deliverables per schedules and implement catch-up actions where applicable.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

• Assist the Engineering Manager on the development of FAT, SAT, Pre-Commissioning, Start-up, Commissioning protocol and support the implementation.

• Development of Operational & Maintenance Manual.

• Assist the Engineering Manager to support project management team in project implementation related engineering, troubleshooting and maintenance requirement.

About the Role

The Project Sales Engineer will act as liaison between the company project team and clients, providing information on planning, delivering, testing, commissioning, service and maintenance repair related knowledge from securing to closing of a project.

Job Description:

• Develop rapport with customers and advance the sales funnel from initial contact to sales.
• Establish good contact with developers, architects and MEP consultants.
• Thorough understanding of relevant industry, products, equipment and services provided to client

Job Requirements:

• Minimum Degree in Mechanical Engineering or equivalent
• Excellent interpersonal and customer service skills
• Strong knowledge in HVAC/ACMV
• Prior experience in the construction related field is highly preferred
• Proficient with Microsoft Office Suite, AutoCAD and project planning related software are required to prepare for proposal, reports and logs

Working Location:

• Ang Mo Kio

Responsibilities:

• Promote and propose suitable chiller and related equipment to building owners, consultants and contractors
• Identify business opportunities and develop solutions with existing and new customers
• Achieve sale target. Maximise account penetration and customer retention
• Prepare costing and contract quote
• Lead a team of in-house technicians or subcontractors to fulfil jobs assigned
• Coordinate with vendors and contractors in schedule planning & prepare works related reports
• Ensure all works are being carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/Degree in Mechanical/ Electrical engineering or its equivalent
• At least 2 years in Engineering sales, experience in HVAC industry will be a plus.
• Possess a valid Singapore class 3 driving license is preferred.
• Customer driven with excellent communication & interpersonal skills
• Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Working Location:

• Gain City Ang Mo Kio

Note:

• Only shortlisted candidates will be notified.

Roles & ResponsibilitiesJob Description & Requirements
General RequirementsBachelor’s degree in construction management, civil engineering or related field of study
Strong communication skills
Professional and polished
Computer proficiency utilizing Microsoft Office Suite software (Word, Excel, Outlook, Power Point) and other applicable software programs
General knowledge of office protocol, routines and procedures.
Ability to read and comprehend plans and specifications
Strong attention to detail, problem-solving skills and ability to meet deadlines
Minimum 4 Years Working Experiences
Roles & Responsibilities• Assist in the development of cost estimates• Review plans and other technical documents• Answer questions regarding the scope and/or timing of the project• Monitor costs and project progress• Maintain control of all project documentation• Maintain/update project records• Assist the project manager/superintendent in creating and distributing the project schedule• Assist project team with conflict resolution between owner, contractor and subcontractor• Assist project manager/owner in getting building permits for the project• Understand appropriate building codes/ regulations• Conduct and document weekly project owner’s meetings/decisions• Assist the project team with site safety documentation and coordination• Assist the project team with closeout of the project• Assist project accountant with monthly subcontractor billings and pay applications

See how you compare with other applicantsLog in to view

Tell employers what skills you have

JOB SUMMARY:

We are seeking a dynamic and experienced Project Engineer to lead the design, implementation, and management of integrated energy systems, including solar, battery storage, generators, IoT-enabled platforms, and smart utilities solutions. The role demands expertise in renewable energy systems, IoT technologies, and smart utilities, with a focus on creating sustainable, efficient, and future-ready infrastructure.

RESPONSIBILITIES:

Key Responsibilities

Project Design and Development

o Engineer integrated energy systems combining solar PV, battery storage, generators, IoT platforms, and smart utility solutions.

o Conduct energy audits, feasibility studies, and performance simulations for both energy and smart utility projects.

o Create designs for smart utilities, including energy-efficient lighting, water metering, HVAC systems, and waste management.

Smart Utilities Integration

o Develop and implement smart utility systems to optimize energy, water, and resource usage.

o Integrate IoT-based solutions for real-time monitoring of utilities such as smart meters, leak detection systems, and automated controls.

o Enhance infrastructure efficiency through predictive analytics and data-driven optimization strategies

System Integration

o Oversee hybrid energy system integration, ensuring seamless functionality between solar, battery, generator, and IoT solutions.

o Incorporate smart grid and distributed energy resource (DER) management capabilities.

o Design and integrate communication networks (e.g., Modbus, Zigbee, LoRaWAN) for utility and energy systems.

Project Execution

o Manage the end-to-end lifecycle of energy and smart utility projects, including planning, procurement, installation, commissioning, and handover.

o Collaborate with multidisciplinary teams, contractors, and third-party vendors to meet project goals.

o Ensure all projects comply with local regulations, codes, and safety standards.

IoT and Automation Solutions

o Design IoT-enabled control systems for energy management, utility monitoring, and automation.

o Implement smart dashboards, predictive maintenance systems, and user-friendly interfaces for clients.

o Resolve communication and integration issues between IoT devices and cloud platforms.

Quality Assurance and Maintenance

o Perform inspections, testing, and troubleshooting of energy and utility systems.

o Ensure high system reliability by implementing preventive maintenance schedules.

o Document all processes, configurations, and test results for compliance and auditing purposes.

REQUIREMENTS:

· Bachelor’s degree in Electrical Engineering, Renewable Energy, IoT Engineering, or a related field.

· Advanced degree or certifications in Smart Utilities, Energy Systems, or IoT Technologies is a plus.

· 3 – 4 years of experience in designing and managing solar, battery, generator, IoT, and/or smart utility projects.

· Proven expertise in hybrid energy system integration and smart infrastructure projects.

· Proficiency in energy modeling and simulation tools (e.g., PVsyst, HOMER, ETAP).

· Familiarity with smart utility systems like smart meters, advanced HVAC controls, and water management solutions.

· Hands-on experience with IoT platforms, protocols (e.g., MQTT, LoRaWAN), and communication technologies.

· Knowledge of renewable energy technologies, power electronics, and utility management systems.

· Proficiency in tools like AutoCAD, or other design and engineering software.

We are seeking a motivated AI/ML Engineer to join our dynamic team. The ideal candidate will have a strong background in machine learning and artificial intelligence with expertise in building and deploying AI-driven solutions.

You will work closely with data scientists, software engineers and product teams to design, develop, and implement AI/ ML features that drive innovative Public Safety operations.

Responsibilities:

Model Evaluation & Optimization

Evaluate model performance using appropriate metrics, and continuously improve models through hyperparameter tuning, cross-validation, and other techniques.

Deployment & Integration

Deploy machine learning models into production environments, ensuring their scalability, reliability, and performance. Integrate AI models with existing systems and APIs.

Collaboration

Work closely with cross-functional teams (data scientists, engineers, product managers, and designers) to identify business problems and translate them into AI/ ML solutions.

Requirements:

• 2+ years of professional experience in AI/ ML engineering or a related field.
• Prior experience as a project member of an AI/ ML implementation project.
• Broad knowledge of current AI/ ML technologies such as Large Language Models (LLMs), Automatic Speech Recognition (ASR) and video analytics and how to incorporate said technologies into solutions across various domains.
• Proficiency in programming languages such as Python, R, or Java.
• Hands-on experience with popular machine learning frameworks (e.g. TensorFlow, PyTorch, Scikit-learn, Keras)
• Strong knowledge of algorithms and data structures.
• Familiarity with deep learning, reinforcement learning, computer vision, NLP, or other specialized AI domains.
• Knowledge of SQL and data manipulation.
• Experience with containerization and orchestration tools (Docker, Kubernetes) is a plus.
• Strong analytical skills with the ability to translate complex problems into practical, scalable solutions.
• Excellent written and verbal communication skills. Ability to explain complex technical concepts to non-technical stakeholders.
• Able to work effectively in a collaborative, team-oriented environment.
• Familiarity with agile development methodologies.

Responsibilities:

• Site preparation and co-ordination.
• Identify and develop new business opportunities to achieve sales target by reaching out to new clients and making presentations or pitches about air-con products and company.
• Preparation and submission of documents.
• Coordinate, liaise and manage various project stakeholders onsite to ensure that project requirements are being met.
• Prepare, create and plan detailed work schedules, manpower and resource.
• Ensure that contractors carry out works in a safe manner with the necessary risk assessments and workplace safety measures in place to manage project risks.
• Have the ability to understand Engineering drawings and perform basic engineering calculations, designs and etc.
• Coordinate the safety management system onsite.
• Follow up with the project and report on the process of the project to higher management.
• Facilities Management for company premises / buildings.
• Any other ad-hoc projects and duties as assigned by reporting manager and/or management.

Requirements:

• Good knowledge of Singapore standards and code of practice.
• Good communication and interpersonal skills.
• Target oriented in a fast-paced environment.
• Those with more experience will be considered for Director.

Job Description

• 5 years relevant working experience in Water Treatment industries is preferable.

• Experienced in the design of water treatment plants (desalination, potable water, demineralization) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.), experience in Demineralization System will be added advantage.

• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/EDI), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager & Lead Engineer, Process on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S and Drafting) on development of engineering deliverable on a timely basis.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

Requirement:

• Degree in Chemical Engineering or Environmental.

• Prior experience of at least 5 years in process design. Experience in UltraPure Water (UPW) will be added advantage.

• Ability to establish and maintain appropriate relationships with team members.

• Able to work independently with minimal supervision

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Mission Software & Services

Our Mission Software & Services business provides leading-edge mission critical command, control, and communications (C3) systems with secured IT infrastructure and managed services. We support our client’s innovation journey through design thinking, analytics, and AI-enabled decision support with our full suite of cloud computing solutions. We provide intelligent, actionable insights and sustainable solutions to our valued partners in diverse industries including defence, government, and commercial sectors.

Together, We Can Make A Significant Impact
You will be responsible for ownership and driving development the design of our design system, user interface and experiences for our digital products. You will work closely with cross-functional teams, including product managers, developers, and stakeholders, to create engaging and user-centered designs that elevate our products, and may be given the opportunity to mentor junior designers as well.

Be Part of Our Success

User-Centered Design

• Conduct user research, interviews, and usability testing to gather insights and understand user needs.
• Translate user requirements into intuitive and visually appealing user interfaces.
• Create wireframes, prototypes, and user flows to communicate design concepts.

Visual Design

• Develop and maintain a consistent visual design language and style guide.
• Design pixel-perfect user interfaces that align with brand guidelines and project objectives.
• Collaborate with developers to ensure the implementation of designs meets design specifications.

Interaction Design

• Define and design interactions and animations that enhance the user experience.
• Ensure seamless navigation and intuitive user journeys throughout the digital product.

Cross-Functional Collaboration

• Collaborate closely with product managers, developers, and other stakeholders to understand project requirements and constraints.
• Advocate for user-centric design principles and provide design guidance during the development process.

Prototyping and Testing

• Create interactive prototypes to demonstrate design concepts and user flows.
• Conduct usability testing and gather feedback to iterate and refine designs.

Design Documentation

• Prepare design documentation, including design specifications, style guides, and design assets for development teams.
• Maintain organized design files and version control.

Mentorship and Leadership

• Provide guidance and mentorship to junior designers.
• Stay updated with design trends, best practices, and emerging technologies.
  

Qualities We Value

• Proven experience as a UI/UX Designer with a strong portfolio showcasing your design work
• Proficiency in design and prototyping tools such as Figma, Sketch, or similar
• Strong understanding of user-centered design principles and usability best practices
• Excellent visual design skills with an eye for detail and aesthetics
• Solid understanding of front-end development technologies (HTML, CSS, etc.)
• Effective communication and collaboration skills

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Responsibilities:

• Drive sales through outbound calls, offering alternative products for parts and addressing client needs.
• Act as the primary liaison between clients, sales channels, and internal teams to ensure seamless communication and service delivery.
• Build strong client relationships, profile target accounts, and gather market insights to identify growth opportunities.
• Negotiate contract terms, oversee project execution, and ensure alignment with client objectives.
• Conduct market research, manage partnerships, and implement processes to support business development.
• Inform the product, management, and technical team on various requirements within the range of product/system including and not restricted to competitor activity, market demands, and requirement and any potential installation changes as issued by end users.
• Gather and communicate market trend and strategies in the territory.
• Liaise with sales personnel and businesses in other regions as and when required.

Requirements:

• Bachelor's degree preferably engineering; with specialization in Sales and Marketing or equivalent experience within a similar role.
• Minimum of 5 years of experience in sales management within the electrical industry, with a focus on Electrical Wiring Devices preferred.
• Familiarity with the Asian market dynamics and customer preferences in the electrical sector.
• Experience in Structured Cabling sales is advantageous.
• Preference for LEW certification.

Location:

• Ang Mo Kio

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business

Our Training & Simulation Systems business has close to 40 years of experience in delivering innovative learning, training, and simulation solutions to customers in the defence, public safety and security, and enterprise domains. We envision to create a better future together through learning, training, and simulation.

Together, We Can Make A Significant Impact

The Instructor Operating Station (IOS) is the main interface in which Flight Instructors and Operators will use, to perform planning, controlling of the training environment, observation, and instruction delivery to pilot trainees within a simulator system. We are looking for someone to join us as a Simulation System Engineer, to co-build solutions together with our IOS team members. These solutions will contribute to our state-of-the-art Air Simulator project’s delivery to our end users.

Be Part of Our Success

• Working closely with other simulator subsystem teams, to ensure proper integration with the various simulator subsystem components (e.g. communication systems, networking, bots, etc).
• Generating engineering documentation within the team, to document the various requirements, design, and test areas to be developed.
• Overseas travel for training, meetings or deployment can be expected.

Qualities We Value

• At least 3-4 years of experience in related field.
• A willingness to learn a wide array of network and virtualisation technology and technology areas.
• While company-sponsored training courses and guidance will be provided, independent learning and being a team player is required, to fit into the team’s culture.
• Being comfortable to engage and communicate with end users, customers will be a plus.
• Strong knowledge of networking technology is a plus.

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Visit https://www.stengg.com/en/defence/training-and-simulation/modelling-simulation-training-systems/ for an illustration on what we do…

• Manage and responsible day-to-day project operations including coordinating activities with sub-contractors and liaise with all party involved in the project;
• Plan, supervise, execute and follow-up on all project actions and schedules;
• Able to schedule, supervise and control sub-contractors/workers to carry out their works accurately and timely in accordance to the contract drawings and specifications;
• Co-ordinate and establish good working relationship with project team, customers, consultants and sub-contractors to facilitate effective co-ordination of work activities;
• To monitor construction / project progress, ensure productivity, legal compliance and all safety precaution till completion of projects;
• Monitor progress on site and ensure that quality works are carried out in order to meet quality and cost objectives, projects are completed on time, within budget;
• Provide assistance in keeping track of approvals during submission stage so as to ensure compliance with government authorities;
• Liaise closely with sub-contractor & consultants to ensure timely completion of projects.

• To perform drawing and design work by using BIM Software;
• Ensuring that all drawings are compliant with project specifications and requirements;
• Assist in manage day-to-day project operations including coordinating activities with construction team and liaise with all party involved in the project;
• Assist to supervise and control sub-contractors/ workers to carry out their works accurately and ensure timely completion of projects to the contract drawings and specifications;
• Assist to monitor construction / project progress, ensure productivity, legal compliance and all safety precaution till completion of projects;
• Co-ordinate and establish good working relationship with project team, clients, consultants and sub-contractors to facilitate effective co-ordination of work activities.

Primary Objective

Ensure the safety and well-being of workers at construction sites, carry out duties in a safe and health environment, free from hazards and risks.

Preventing accidents, protecting lives, and promoting a culture of safety within the construction

Job Responsibilities

1. Compliance and Regulation:

Ensure compliance with Workplace Safety and Health (WSH) regulations, guidelines, and codes of practice.

Maintain up-to-date knowledge of local safety laws and industry standards.

Conduct regular audits and inspections to ensure safety compliance.

2. Risk Assessment:

Identify potential hazards on-site and conduct risk assessments.

Develop, implement, and review safety measures to mitigate identified risks.

Ensure that all safety procedures are documented and accessible.

3. Safety Planning:

Develop and implement safety management plans (SMP) and risk management systems.

Collaborate with project managers and engineers to integrate safety considerations into project planning and execution.

4. Training and Education:

Conduct safety induction and ongoing training programs for all site personnel.

Promote safety awareness and cultivate a culture of safety among workers.

Ensure that all workers are aware of emergency procedures and the proper use of Personal Protective Equipment (PPE).

5. Incident Management:

Lead investigations of workplace incidents, accidents, or near misses.

Document and report incidents to relevant authorities and management.

Implement corrective actions to prevent the recurrence of incidents.

6. Monitoring and Reporting:

Monitor the worksite to ensure that safety measures are being adhered to.

Prepare and submit safety reports, records, and documentation required by regulatory bodies.

Conduct regular safety audits and inspections.

7. Emergency Preparedness:

Develop and implement emergency response plans.

Conduct regular emergency drills and simulations.

Ensure that first aid facilities and emergency equipment are readily available and maintained.

8. Coordination and Communication:

Liaise with government authorities, external auditors, and safety consultants.

Coordinate with subcontractors and suppliers to ensure they adhere to WSH requirements.

Communicate effectively with site workers, management, and other stakeholders regarding safety issues.

9. Continuous Improvement:

Review and update safety policies and procedures regularly.

Analyze safety performance data to identify trends and areas for improvement.

Introduce new safety technologies or practices to enhance site safety.

Key Activities:

• Conducting daily site safety inspections.

• Organizing toolbox meetings with workers to discuss safety topics.

• Managing and documenting the use of safety equipment like harnesses and scaffolding.

• Keeping track of safety certifications and training records for all personnel.

• Handling the registration and safe use of machinery and equipment on-site.

• Ensuring proper signage and barricades are in place to prevent unauthorized access to hazardous areas.

• Evaluate and inspect the environment, equipment and processes in project sites to ensure compliance with government safety regulations and industry standards.

• Formulate and administer comprehensive Risk Management and review safe work procedure.

• Investigate accidents to identify their causes and find ways to prevent them in the future.

• Conduct safety related training for the staff and sub-contractors including foreign workers.

• Coordinate implementation of corrective and preventive action.

• Other ad-hoc duties assigned from time to time.

Job Requirements

• Degree or Diploma in Safety, Engineering or related qualifications with LTA experiences.

• Registered WSHO with MOM.

• High degree of initiative with strong analytical, communication and interpersonal skills.

• Familiar with LTA safety requirements

1. Prepare month-end and year-end Financial Reports and Cash Flow

2. Perform daily accounting and finance duties

3. Quarterly Filing of GST Returns & Filing of Annual Returns

4. Handle Payroll Processing

5. Submission of monthly CPF Contributions

6. Prepare disbursement/payment vouchers and Tax Invoices

7. General office duties as required

About the Role

The Project Sales Manager will act as liaison between the company project team and clients, providing information on planning, delivering, testing, commissioning, service and maintenance repair related knowledge from securing to closing of a project.

Responsibilities:

• Responsible for acquiring and managing project sales for air-con products/systems.
• Identify and develop new business opportunities to achieve sales target by reaching out to new clients and making presentations or pitches about air-con products and company.
• Understanding clients’ need and customize proposal/quotation accordingly to their needs.
• Responsible for the project budget evaluation and ensure successful delivery of the assigned projects on time.
• Work closely with the company’s internal sales and installation teams in executing the projects.

Requirements:

• Minimum 4 years of experience, prior experience in air-con / M&E works will be advantageous.
• Good experience in ACMV and HVAC Chiller will be an added advantage.
• Relevant sales experience with strong project management, planning and organization skills.
• Excellent communication skills.
• A self-starter, innovative and highly results-driven.

We are searching for a passionate and engaging Training or L&D Manager to join our team! In this role, you will be responsible for designing, delivering courses/trainings and assessing the competencies of our learners. You will play a key role in helping our learners achieve their learning goals and develop the skills they need to succeed in the respective industry.

Responsibilities

• Oversee the full spectrum of training operations from developing courses, enrollment, facilitating the training and assessment sessions, certificate issuance to evaluation.
• Review training policy from time to time.
• Design and develop engaging and effective courses/training programmes for adult learners of different skill levels.
• Conduct courses/training programmes using a variety of instructional methods covering theory or practical skills.
• Ensure the timely submission of training documents from various departments and public learners.
• Engage and interview associate trainers.
• Assess learner competencies through different assessment methods.
• Maintain and update training records or course content.
• Stay up-to-date on industry trends and best practices in adult education.
• Collaborate with various departments to design, develop engaging new courses/training programmes and to improve existing courses/training programmes.
• Application of relevant training grants/claims.

Requirements

• Minimum Bachelor's degree in any field
• WSQ DACE/DDDLP
• Minimum 3 years’ experience in adult education or training delivery preferred
• Strong subject matter expertise in any of the following industries/areas and able to take on at least 2 areas:

1. Retail (e.g Customer Service)
2. Built Environment (e.g. Ducting Installation, Basic Aircon Installation, Maintenance and Repair)
3. Logistics
4. Landscape
5. Security
6. Waste Management
7. Workplace Safety and Health (e.g. Operate Forklift, R32 Safety Awareness)

• Excellent communication, interpersonal, and presentation skills
• Ability to create a positive and engaging learning environment
• Ability to develop and deliver courses/training programmes using a variety of instructional methods
• Proficiency in using Training Learning Management Systems (TLMS) a plus
• Proficiency in using BigBlueButton, MS Teams or Zoom a plus
• Knowledge in Training Management System and Canvas Learning Management System a plus.
• RIASEC Code: SEC

ComfortDelGro Engineering (“CDGE”) is going through an exciting transformation journey. CDGE has more than 40 years’ experience providing automotive services for taxis, as well as private and commercial vehicles. We are also the exclusive distributor for Volvo Bus & Parts, Davanti Tyres (passenger cars) and Duraturn Tyres (Commercial Vehicles).

We are looking for a team member to join CDGE and grow the B2B business for our electric vehicle.

You should feel comfortable and aspire to be a hunter to generate leads and build the sales pipeline. To succeed in this role, you must be experienced in preparing proposals and presenting to customers to secure and win deals.

Role and Responsibilities:

• Drive the sales and growth of vehicle sales
• Seek new sales opportunities via cold calling, networking and social media
• Generate and convert leads to build sales pipeline
• Arrange and oversee customers’ test drive appointments, offering expert insight for vehicle features, and specifications throughout the scheduled appointments
• Prepare commercial proposals, approval paper and business case, tender for direct sales
• Prepare and submit tender for own or assigned sales lead
• Ensuring a consistently presentable showroom and vehicles at all times
• Attend to customer enquiries, inquiries, financing and complaints
• Retention and submission of documents to authority for vehicle registration
• Pursue new sales prospects, negotiating deals, and maintain customer satisfaction
• Perform check of vehicle prior take over by customer
• Any related ad-hoc tasks

Requirements:

• Individuals with sales experience in engineering related fields or banking considered
• Fresh Graduates with great sales aspiration in Electric Vehicle industry welcomed
• Ability to generate leads and identify strategic areas for growth
• Assist to prepare proposals and presenting to customers to secure and win deals
• Driven, strong negotiation and sales closing skills
• Strong commercial acumen and sound financial grounding
• Ability to influence and build credible, trusting customer relationships
• Well versed in Microsoft PowerPoint, Excel and Word
• Class 3/3A license preferred
• Strong Communication & Writing Skill

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Mission Software & Services

Our Mission Software & Services business provides leading-edge mission critical command, control, and communications (C3) systems with secured IT infrastructure and managed services. We support our client’s innovation journey through design thinking, analytics, and AI-enabled decision support with our full suite of cloud computing solutions. We provide intelligent, actionable insights and sustainable solutions to our valued partners in diverse industries including defence, government, and commercial sectors.

Together, We Can Make A Significant Impact

This position involves maintaining and operating equipment, troubleshooting issues, conducting preventive maintenance, and ensuring facility safety & security. Responsibilities include participating in emergency response activities, documenting procedures, and performing various maintenance tasks. The individual will need to work effectively as part of a team and communicate professionally with colleagues and supervisors.

Be Part of Our Success

• Resolve identified engineering issues with equipment to keep downtime to minimum
• Active participation in first level troubleshooting / root cause isolation / recovery action on all reported incidents and escalate incidents to supervisor
• Perform planned preventive maintenance (PPM) / Reactive Maintenance (RM) / Service order (SO) to minimize equipment downtime
• Documentation of standard operating procedures / Checklist of equipment Tasks
• Work as a team to monitor and perform facility inspections and report on condition affecting operations
• Performs repairs, maintenance and installation.
• Conduct routine monitoring and spot checks of all building equipment and systems
• Involve in company’s Emergency Response team (ERT), first aid and environmental health & safety (EHS) activities
• Ensure calls are answered and emails are responded in a timely, efficient and professional manner
• Perform any other duties assigned and assist in ad-hoc tasks by supervisor or manager
• Contributes to team effort by accomplishing related results as needed.
• Ensure proper handover and takeover during shift changes.

Qualities We Value

• Computer literate with the ability to compile and submit daily reports.
• Experience and with understanding mechanical and electrical field / engineering & building services industry will be a plus
• Able to read architectural, structural, mechanical and electrical as built will be a plus
• Able to commit to 12hrs rotating shift work that includes day, night and weekends/

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Job Description:

• Review tender specifications / customers’ requirements and prepare process design.
• Obtain quotation from vendors, suppliers, and subcontractors based on the requirements.
• Interact closely with vendors to understand new technologies and effective implementation of customer applications using vendor’s information.
• Interact closely with customers on technical information and clarifications.
• Prepare cost effective costings.
• Prepare commercial & technical proposals with specifications for timely bid submissions.
• Generate / coordinate P&ID and General Arrangement drawings.
• Work with Business Development Manager to apply costing and process design strategies to increase probability of winning bids.
• Coordinate with Process / Mechanical / Electrical & Instrumentation Team for technical clarification support if required.
• Follow up with customers on submitted proposals and potential opportunities.
• Negotiate with vendors and customers if required.
• Upon award of projects, review and verify completeness of PO contract and compliance with agreed requirements.
• Communicate and nurture relationships with customers to drive more opportunities.

Requirements:

• Degree in Environmental or Chemical Engineering.
• Knowledge or previous experience in water treatment process and municipal wastewater treatment such as Filtration, UF, RO, EDI, SRU, MBBR, MBR etc.
• Knowledge and experience on pumps, motors, valves, piping, mechanical and electrical components for oil and gas industry is added advantage.
• Minimum 5 years of relevant experiences.
• Strong verbal and written communication skills in English.
• Ability to prioritize multiple tasks and work on own initiative.
• Willing to travel for site visits, sales presentation to customers and technical clarification meeting occasionally.

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business

Our Training & Simulation Systems business has close to 40 years of experience in delivering innovative learning, training, and simulation solutions to customers in the defence, public safety and security, and enterprise domains. We envision to create a better future together through learning, training, and simulation.

Together, We Can Make A Significant Impact
To maintain consistent practice while also seeking balance with the customer experience, you will maintain awareness of the company’s Quality Management System (QMS) and ensure conformance with policies and processes, while helping the team to stay productive and focused on the solution for the customer.

You will also take on a lead role, where you will lead a team and provide the technical leadership and ensuring that the execution of the sub-system assigned to you runs smoothly and efficiently. Where applicable, you will guide the team on common and/or standardised methodologies, particularly where there are collaborative works with external parties. In addition, as regular duties, you will liaise with the company’s leads from the various products offering to design and implement technology solution.

Be Part of Our Success
You will be involved the development high-fidelity models in a flight simulator. You will be involved in understanding the various aircraft systems or avionics to model, designing, and developing software that accurately reflects the behaviour of the avionics in real-life. You may also expect to apply a different programming language in the course of your work.

• Perform design & implementation of software system projects that define the architecture, components, interface & other characteristics of an application.
• Conduct user requirements, application development, system integration, deployment as well as troubleshooting.
• Conduct testing to evaluate the attribute or capability of the software & determine that it meets the expected results.
• Perform quality assurance & ensure the software meets customers' expectations.
• Cooperate with leads from the various products offering to define solutions for your sub-systems
• Handle and manage the technical budgets with the goal of solution delivery within parameters.
• Technical team management

Qualities We Value

• Prior experience in system design with good understanding of technical trends
• Knowledges of code management software, programming skills
• Proficiency in English (writing and speaking)
• At ease with high-level communication and networking
• Able to learn quickly about products and services, comfortable with technical jargon
• Self-motivated and resilient, with composure to deal with circumstances and customer demands
• Hands-on experience in system design & application development for medium to large-scale projects will be an added advantage.
• Strong in software development, especially in C/C++.

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

We are seeking an experienced Engineer to join our Industrial Automation & Digitalization team for contorl panels. The ideal candidate will be responsible for the design and development of industrial automation control systems, ensuring high-quality project execution and client satisfaction.

Key Responsibilities

• Development and programming of PLC, SCADA, and HMI systems (preferably with Siemens, Rockwell, Wonderware/AVEVA).
• Experience in design and development of control panel and electrical architectures.
• Conduct Hardware and Software Factory Acceptance Tests (FAT).
• Perform testing, commissioning, and Site Acceptance Tests (SAT) at client locations.
• Provide technical support to the Sales team during project bidding.
• Offer onsite and remote technical support and services.
• Ensure overall quality control of all project deliverables.
• Collaborate effectively with team members and clients.
• Travel within Singapore internationally including offshore Oil & Gas facility as needed for project implementation and meetings.

Requirements:

• 3-6 years of hands-on experience in industrial automation & digitalization.
• Proficient in various communication protocols used in the automation industry.
• Strong knowledge of automation technologies specific to Pharma, Oil & Gas industries is an advantage.
• Strong verbal and written communication skills.
• Team player with a flexible approach to work and problem-solving and engage with other project team members in Singapore and overseas.
• Diploma or Degree in Electrical, Electronic, Computer, Mechatronic Engineering, or equivalent.
• A willingness to learn and a growth mindset.

Job Summary:

We are seeking an experienced Building Management System (BMS) Specialist to join our team. The successful candidate will be responsible for designing, installing, commissioning, and maintaining building management systems.

Responsibilities:

• Design, install, commission, and maintain BMS systems
• Configure and program BMS software and hardware
• Troubleshoot and repair BMS system issues
• Collaborate with stakeholders to identify and implement energy-efficient solutions
• Develop and implement BMS system training programs for users

Requirements:

• Bachelor's degree in Electrical Engineering, Computer Science, or related field
• 3+ years of experience in BMS design, installation, and maintenance
• Proficiency in BMS software and hardware, such as Schneider Electric, Siemens, or Honeywell
• Excellent problem-solving and analytical skills
• Strong communication and interpersonal skills

Note:

• Only shortlisted candidates will be notified.

• To perform drawing and design work by using BIM Software;
• Ensuring that all drawings are compliant with project specifications and requirements;
• Assist in manage day-to-day project operations including coordinating activities with construction team and liaise with all party involved in the project;
• Assist to supervise and control sub-contractors/ workers to carry out their works accurately and ensure timely completion of projects to the contract drawings and specifications;
• Assist to monitor construction / project progress, ensure productivity, legal compliance and all safety precaution till completion of projects;
• Co-ordinate and establish good working relationship with project team, clients, consultants and sub-contractors to facilitate effective co-ordination of work activities.

• Manage and responsible day-to-day project operations including coordinating activities with sub-contractors and liaise with all party involved in the project;
• Plan, supervise, execute and follow-up on all project actions and schedules;
• Able to schedule, supervise and control sub-contractors/workers to carry out their works accurately and timely in accordance to the contract drawings and specifications;
• Co-ordinate and establish good working relationship with project team, customers, consultants and sub-contractors to facilitate effective co-ordination of work activities;
• To monitor construction / project progress, ensure productivity, legal compliance and all safety precaution till completion of projects;
• Monitor progress on site and ensure that quality works are carried out in order to meet quality and cost objectives, projects are completed on time, within budget;
• Provide assistance in keeping track of approvals during submission stage so as to ensure compliance with government authorities;
• Liaise closely with sub-contractor & consultants to ensure timely completion of projects.