Nanyang Environment and Water Research Institute, NTU is looking for a Research Fellow with expertise in chemical reactors to develop an improved prototype for a thermocatalytic process.

The project is funded by National Environment Agency, Singapore to address one of the largest problems in waste management – the problem of plastic waste pollution. A significant fraction of plastic waste has substandard quality for mechanical and chemical recycling even after sorting and cleaning. The Research Fellow will work on the design, fabrication and testing of a chemical reactor system that will use pyrolysis-chemical vapor deposition (CVD) technology for converting these plastic waste streams (specifically, contaminated and rejected plastics) into multi-walled carbon nanotubes (MWCNTs) and hydrogen. The role of Research Fellow is to design a system prototype that can effectively mitigate the impact of impurities from diverse plastic waste streams on production outputs and can be operated in a continuous mode.

Key Responsibilities:

The candidate will be undertaking full research work and administrative duties during the term of employment within the following areas:

• Experimental work on plastic waste conversion into carbon nanotubes and hydrogen.
• Design, procurement, installation and operation of the prototype system;
• Investigation of system performance and determining factors that influence the yield and quality of outputs;
• Development of improvements in system design to mitigate the factors decreasing quality and yield of outputs;
• Development of a continuous process;
• Liaising with vendors regarding the feasibility of scale up and conducting a cost-benefit analysis.
• Publishing research papers and documenting developed intellectual property.
• Reporting the progress to stakeholders (internal and external).

Job Requirements:

• Ph.D. degree in a field relevant to chemical reactor engineering (e.g., Chemical Engineering, Thermal Engineering, Mechanical Engineering, Process Engineering or other).
• PhD thesis or postdoctoral experience related to chemical reactor engineering for at least one of the following areas: (a) catalytic reactors, (b) continuous reactors.
• First-author publications in the areas mentioned above.
• High proficiency in English (e.g., TOELF, IELTS, GRE) for preparation of research papers.
• Ability to prepare well-written technical reports and research papers.
• Ability to prepare decent quality presentation decks, figures and illustrations.
• Ability to build formal and informal partnerships and work collaboratively with others to meet shared objectives.
• Ability to consistently achieve results, even under challenging circumstances.

We regret to inform that only shortlisted candidates will be notified.

Job Description:

- Conduct product development activities, such as product system & sub-system design and integration, technical evaluation, prototype preparation / testing, test analysis and system qualification.

- Review specifications and technical requirements with clients.

- Generate product technical documents, drawings, assembly drawings and bill-of-materials.

- Provide technical support to manufacturing, quality and marketing department.

- Work effectively in a multiple department project team to ensure that project schedule, budget and quality are met.

Job Requirements:

- Degree in Mechanical Engineering.

- Knowledge in 3D modeling software such as Solidworks is an advantage.

- Able to work hands-on and manage project deliverables individually.

- An effective team play.

- Excellent problem solving skills.

SERVICE TECHNICIAN (5 Day / West)

Job Type : Full-Time

• Travel Opportunity
• Training Provided
• 5 Days Work Week

Responsibilities :

• Have a passion to carry out trouble-shooting and maintenance works.
• Love the satisfaction after solving difficult machines.
• Willing to do hands-on work
• Willing to do brazing work
• Any other adhoc duties as assigned

Requirements :

• Candidate must possess at least Secondary School / "O" Level, Professional Certificate / NiTEC, Diploma / Advanced / Higher / Graduate Diploma in Engineering (Industrial), Engineering (Mechanical), Engineering (Mechatronic / Electromechanical) or equivalent.
• Required Language(s) : English
• Required Skill(s) : Aircon, Refrigeration, Chiller, Mechanical, Vacuum Pumps, Water Pumps, Scrubbers or Chillers.
• Able to travel on short notice
• Possess valid driving license (optional)
• Only Singaporean / SPR / Malaysian may apply.

Interested candidates who wish to apply for the advertised position, please send to us your resume via APPLY NOW

Email : [email protected]

We regret that only shortlisted candidates will be notified.

Position : Project Manager

Roles and Responsibilities

· Maintain inspection records of works, materials and all completed works

· Keeping track on variation and claims of contract and cost impact and feedback information to the Project Director

· Implement cost control measures to meet project budget

· Site co-ordination with all concerned parties and to resolve site issues

· Plan and schedule work sequences for construction operation, according to the Project Management Plan.

· Liaising with consultants on design analysis, design work, design check for approval and to resolve technical issues on site.

· Site inspection for civil work, which includes excavation, structural, casting and ensure that the work is executed as per the project specification and construction drawing/final approved drawing from authorities.

· Ensure worker carried out meet out quality standards and contractual requirements.

·To control materials, plan the overall schedule and implement specific planning measures

Requirements:

· Bachelor's degree in Civil Engineering or relevant field

· Minium 5 years of project environment experience

· Able to work independently and possess good problem-solving skill.

· Superior civil, structural, or architectural engineering working knowledge of plans, engineering drawings, specifications and schematics associated with the mechanical and plumbing trades

· Computer literacy. Significant experience with Excel, Word, and other computer based tools

· Excellent communication and organizational skills

Description

• The IT Business Analyst (BA) is responsible for supporting company users in utilizing the IT applications to execute their business functions.
• The IT BA will engage with the business stakeholders and to understand the business processes, gather and qualify the requirements, designing and develop the solutions within schedule and budget.
• Continuously review the existing application and support improvement activities wherever applicable. The IT Developer will be required to support ad-hoc/unplanned IT activities on a regular basis.

Essential duties and responsibilities include the following:

IT Application and Management

• Ensure the smooth running of all IT applications and interfaces
• Assist the IT Application Manager on all application incidents and problem management
• Assist IT Application Manager in process design workshops, training, testing and data migration for application and related systems; these includes user requirements for functionality enhancements and issue resolutions
• Perform actual application design and development work based on business requirements
• Plan and execute test and change management activities across all applications and interfaces
• Conduct application usage training to users, developing training materials and user guides as appropriate
• Ensure all application access is monitored and regularly review against segregation of duties (SOD) policy

Delivery management

• Work with project sponsors/stakeholders for all application-related projects and activities
• Follow good project management practices and governance within the IT and vendor teams

Outsourcing and vendor management

• Assist the IT Application Manager to conduct regular vendor assessments and performance against agreed SOW and SLA

Requirements

• Diploma or Degree in IT/Computing or related
• Preferably 1 year of software development experiences
• Experience in one or more of the following programming; JavaScript, HTML/CSS, SQL, Python
• Understand Microsoft SharePoint “out of the box” features; Content Management, Search
• Experience in Microsoft Power Platform; Power Apps, Power BI, Power Automate
• Experience in using Microsoft SharePoint List, Microsoft Dataverse
• Understand how to build and manage large document libraries
• Exposure to Engineering industry environment (preferred)
• Good communicator with strong problem solving and analysis skills
• Positive attitude and able to work well with culturally and geographically diverse teams.

Responsibilities:

• Develop/update hull material, architectural outfitting specifications and weight and centre gravity (W&CG) study.

• Coordinate/execute contract specification requirements and production inputs into engineering drawing/document.

• Prepare bill of material, review and selection of materials.

• Provide progress reporting and schedule management of engineering deliverables.

• Perform site visits to rectify engineering issues, determine existing conditions or verify new construction.

• Coordinate work and integration with other engineering disciplines, production, QA/QC and clients.

• Meet with vendors, client reps, accreditation representatives when required.

• Perform any other tasks as may be assigned by the supervisor.

Requirements:

• Minimum 5 years working experience in a marine/offshore industry either with shipyards or marine equipment manufacturers.

• Minimum Diploma or Bachelor's Degree in Structural Engineering or Marine Engineering.

• Ability to understand and perform structural analysis of the hull and structures, knowledge of Intergraph-SmartMarine 3D Software will be advantageous.

• Familiar with Marine & Offshore rules, regulations and requirements.

Responsibilities:

• Design and produce single line diagrams of electrical/instrument system and determine the interface/termination diagrams in accordance with equipment specifications.
• Size cables and breakers LV/MV according to applicable rules and regulations.
• Review all electrical equipment, vendor’s proposals for technical accuracy and constructability
• Prepare material take off for bulk material orders of power and control cables, cable trays and ladders and various ship electrical equipment and systems according to project contract specifications.
• Prepare electrical equipment foundations/supports and room arrangement/layout, lighting layout, power/control cableway plan, power/control cables routing plan and cable schedules.
• Interface, size and design electrical equipment capacity e.g. switchboards, transformers, navigation, PABX, LAN and fire & gas systems, etc.
• Prepare electrical installation construction standard according to IEC/IEEE shipbuilding practice and international standard.
• Coordinate/execute contract specification requirements and production inputs into engineering drawing/document.
• Provide progress reporting and schedule management of engineering deliverables.
• Coordinate with other production team members, subcontractors and consultants to resolve technical issues onsite which affect the electrical schedule and project deliverables.
• Perform site visits to solve engineering problems when required to determine existing conditions or verify new construction.
• Meet with vendors, client reps, accreditation representatives when required.
• Review and reply to class comments
• Perform any other tasks as may be assigned by the supervisor
• Ensure compliance to relevant government regulations and company’s quality, safety, health and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum 3 years of relevant experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers and a Diploma in Electrical Engineering or related engineering discipline or minimum 6 years of experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers.
• Familiarity with Marine & Offshore rules, regulations and requirements.
• Knowledge of Intergraph Software will be an added advantage.
• Good communication skills, meticulous, resourceful, able to multi-task

About our company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Operate cranes and hoists
• Transfer loads to construction sites and discharge safely
• Bind loads to cranes
• Conduct equipment and machinery inspections
• Keep and update maintenance and activity log
• Carry out basic repairs to machines
• Follow safety guidelines and protocols
• Any other duties to be assigned from time to time

Pre-requisites:

• Must be a registered Mobile Crane Operator with MOM
• Must possess minimum of class 5 license
• At least 3 years of relevant experience
• Willing to work on weekends and Public Holidays when required
• Project location: Jurong Island (Company transport provided at designated pick-up points)

About our company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Operate crawler cranes to lift, move, and position heavy materials and equipment on construction sites.
• Follow proper lifting procedures and ensure that loads are secure before lifting.
• Collaborate with construction site supervisors, riggers, and other operators to coordinate crane movements and ensure efficient workflow
• Conduct equipment and machinery inspections
• Keep and update maintenance and activity log
• Carry out basic repairs to machines
• Follow safety guidelines and protocols
• Any other duties to be assigned from time to time

Pre-requisites:

• Must be a registered Crawler Crane Operator with MOM
• At least 3 years of relevant experience
• Willing to work on weekends and Public Holidays when required
• Project Location: Jurong Island (Transport provided at designated pick-up points)

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB.

Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

5. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them

6. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.

7. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

Responsibilities:

• Develop/update hull material, architectural outfitting specifications and weight and centre gravity (W&CG) study.

• Coordinate/execute contract specification requirements and production inputs into engineering drawing/document.

• Prepare bill of material, review and selection of materials.

• Provide progress reporting and schedule management of engineering deliverables.

• Perform site visits to rectify engineering issues, determine existing conditions or verify new construction.

• Coordinate work and integration with other engineering disciplines, production, QA/QC and clients.

• Meet with vendors, client reps, accreditation representatives when required.

• Perform any other tasks as may be assigned by the supervisor.

Requirements:

• Minimum 5 years working experience in a marine/offshore industry either with shipyards or marine equipment manufacturers.

• Minimum Diploma or Bachelor's Degree in Structural Engineering or Marine Engineering.

• Ability to understand and perform structural analysis of the hull and structures, knowledge of Intergraph-SmartMarine 3D Software will be advantageous.

• Familiar with Marine & Offshore rules, regulations and requirements.

Purpose of Role:

This person is responsible for ship electrical detail design activities and able to process basic design information to expand the function design into production information for the marine vessel.

This role shall perform engineering of electrical and navigation equipment to the related platform equipment, as well to interface with Ship Management System (SMS). The scope includes :

o Main Power generation and distribution system network and architecture

o Integrated electric propulsion systems, Power management systems

o Engineering integration between ship equipment / Ship Monitoring system with Electrical power generation

o Electrical fittings, equipment and panel arrangement

o Preparation of equipment connection and cable schedules

o Electrical design calculation

Responsibilities:

• Responsible for vessel electrical system detail design in accordance with Marine Classification and regulatory, as well as IMO/Solas

• Review vendors technical proposal to ensure solution meets the functional requirement

• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.

• Liaise with client and other internal engineering trades for project coordination.

• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge and Skills:

• Knowledge of Marine Electrical and Automation systems

• Knowledge in Autocad, Naviswork, ETAP and CADCAM 3D software will be advantageous

Requirements:

• 3 years of related experience in Ship design related engineering industries such as Marine & Offshore
• Degree in Electrical, Automation, Mechatronic or any related engineering field
• Good Interpersonal Skills, Problem-Solving skills and is a team player.
• Good time management and able to meet tight deadlines.

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Responsibilities:

• Report directly to Mechancial Department Head in all matters
• Supporting Engineers and Senior Engineers in day to day operation
• Supervise and ensure safety of vessel maintenance and repair works.
• Leading a team of Technician to perform repair and maintenance onboard ships
• Carry out troubleshooting and rectification of mechanical/diesel defects.
• Perform joint inspection and acceptance with ship representative
• Hands on work in rectification of defects and maintenance of mechanical components
• Ensure quality of work performed by ownself and technician deployed
• Assist in logistic support, lifting of equipment and workshop equipments etc

Requirements:

• Diploma in Mechanical / Marine Engineering
• Able to use IMTE Tools such as Torque Wrench, Pressure gauges, Internal and External Micrometer
• Able to work under pressure
• Able to work in a team
• Able to perform hands on work
• Able to work in shipyard environment – heat, grease, dust
• Proficiency in Microsoft Word, Excel
• Only Singapore Citizens will be considered for this role

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Roles & Responsibilities

Working under the Project Manger to complete the project on time, which include: -

1. Check and monitoring of site progress and resolving of site issues with clients
2. Follow up with factory for production order, delivery schedule, etc
3. Update QS on progressive claim, variation order, etc
4. Ability to work effectively both independently and as part of a team
5. Advantage if with experience using computers.
6. Willing to start work at 7 am as per project requirement
7. Willing to do overtime and work weekends on a regular basis
8. Foster positive communications and relationships with vendors, clients & Team members MOSTLY Foreign Workers.
9. Willing to Be hands on when needed for the work porgress.
10. Wiling to be exposed to exposed weather due to site requirement.

Transport clients and/or packages to and from destinations. Arrive at destinations on schedule. Fulfill administrative needs, like office pickups. Research and plan for traffic, construction and weather delays.Driver responsibilities include arranging regular cleaning and maintenance services for the vehicle, planning each route based on road and traffic conditions

• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.
• Interacting with clients, interpreting their needs and requirements, and representing them in the field.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions.
• Developing specifications for the project's needed equipment.
• Creating frameworks to measure the project's metrics and data collection.
• Establishing field test methods and methods for monitoring the quality of those tests.
• Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

• Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools
• Form tile beds using concrete, plaster, mastic, cement, glue or mortar utilizing tools such as screeds, brushes and trowels
• Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise
• Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results
• Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly
• Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms
• Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles
• Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go about jobs

• At least 1 year of Sales experience within the interior construction sector.
• With presentations and time management skills.
• Diploma / certification in any of the following: Architecture, Interior Design, Project/construction management, Marketing Management or related building construction/ M&E studies, Marketing Management.
• Familiar with, electrical, Celling partition work, carpentry, Tilling work, Awning work, renovation works and fit-out works.
• Experience in managing multiple projects.
• Positive, commitment and “can-do” attitude.
• High integrity, good team player, keen desire to learn, contribute, advance and progress with the company.
• Delivering business/Market share in collaboration with Zonal Sales teams for the year/quarter/month
• Salary+Sales Commission+Yearly Bonus
• Responsible to lead development and implementation of key strategic marketing initiatives for Singapore comprising of PQ, CPC, PDA and Bussmann in order to achieve the Sales Revenue growth in Singapore year on year
• Coordinating market analyses with sales team members and defining appropriate forecasts and plans
• Driving sales efficiency by delivering appropriate product knowledge information and training for each salesperson
• All works Monitoring with subcontractor and handover to clients.
• Monitoring Payment

Position : Steel Structural Engineer

Roles and Responsibilities

· Candidate must possesses Steel Structures and/or related experience.

· Liaise and coordinate with consultants, client, main contractor, other contractor and authority

· Manage site supervisor and workers to perform according to planning

· To review the shop drawings before submitting to consultants for final approval.

· To coordinate with design consultants for structural submissions to relevant Authorities.

· To review structural submission drawings and design reports prepared by consultants in terms of feasibility for construction.

· To assist the Project Manager in the daily activities of work

· Proficiency in Tekla Software , Autocad

Requirements

· Degree in Civil / Structural Engineering / Mechanical

· Min 2 years structural coordinator experience

· Good knowledge of Structural specifications & requirements

Position: Drafter

Roles & Responsibilities

· Prepare shop drawings , fabricate drawing , As-built drawings

· Model development, construction, documentation and production techniques

· Assist in general quantity surveying duties such as pre/post contract duties, taking-off quantities, cost control, variations, finalization of cost and tender administrative duties and Material Inquiries & procurement.

· Monitor the site progress, and confirms sub-contractors, vendors and supplier’s obligations.

Requirements:

· Bachelor Degree in construction-related , civil engineering field

· Good Communications skill

· Knowledge of structural will be beneficial

· Academic in relevant structure steel , building/engineering

· Familiarize in all construction trades and practical aspects of architectural joinery works an advantage

· Proficiency in Tekla Software , Autocad

· Able to work on Multiple projects, Within simultaneous timeline

· Highly motivated Responsible & team player with good interpersonal skill

· Working Hour: Mon-Fri (9am to 6pm) , Sat (Half Day)

• Update and ensure accurate maintenance of employee database, profiles and other HR-related information.
• Ensure on the necessary for a smooth onboarding of documentations for new hires or exit processes.
• Provide administrative support for all employment matters.
• Following up on course registration, after-training evaluation, etc and maintain up-to-date training forms/ records.
• Assist in planning, coordinate and organise company events. Includes sourcing and coordinating with external and internal vendors.
• Assist in managing the maintenance and housekeeping of office premises and equipment.
• Support the team in various projects and initiatives as needed.
• Assist with general administration of various departments within the organization and other ad-hoc tasks as assigned.
• Handle correspondence, including emails and phone inquiries, in a professional manner.

Important Notes:

• Ability to work independently and collaboratively within a team.
• Proficient in Microsoft Excel, Microsoft Word and Microsoft Power Point.
• Positive attitude and willingness to learn.
• Demonstrate workplace integrity and uphold respect, honesty, responsibility and accountability.

Job Description:

• Monitor and maintain accurate inventory levels of MRO materials and equipment.
• Conduct regular stock checks and audits to ensure inventory accuracy.
• Safely store MRO materials and equipment in the warehouse following proper guidelines.
• Implement proper labelling and categorization systems to ensure materials are easy to find.
• Process orders for maintenance parts and equipment requested by maintenance or operational teams.
• Ensure timely delivery of required parts to avoid delays in maintenance or production.
• Assist with sourcing and negotiating the purchase of MRO materials as needed.
• Maintain accurate records of inventory, requisitions, and shipments.
• Update computerized inventory systems or databases.
• Ensure the warehouse meets all safety standards, including proper handling of hazardous materials.
• Ensure that all MRO tools and equipment are in good working condition.
• Act as a liaison between the warehouse and other departments, ensuring clear communication regarding stock availability, order status, and material requirements.
• Oversee the calibration and maintenance of tools and equipment stored in the warehouse.
• Coordinate with maintenance personnel to ensure tools are functioning properly.
• Comply with all regulatory and environmental requirements.

Roles & Responsibilities

Cost Estimation .Invoicing . Project Management . Budget Planning .Construction Schedule and Planning .Communicate with different Disciplines .Problem-solving .Generating Job Packs and Test Packages .Creating Work Method of Statements c/w Risk Assessment. Developing Strategies to improve Company performance,Provide supports to execute MOC (Management of Change) jobs, shutdown job, revamping and turnaround job and to ensure job is executed as Exxonmobil standard and specifications.

Developing Work method of statement, Job safety analysis, Risk Assessment.

Prepare and develop Job packs, Loop folders, test packages, red line mark ups and as-builting.

Prepare and procure materials. Prepare and submit material approval to client.

Review and verify Construction drawings, generates engineering query, field instructions.

Process and Construction and Management @ Jurong Island Field work.