· Install electrical apparatus, fixtures and equipment for alarm and other systems

· Install safety and distribution components (e.g. switches, resistors, circuit-breaker panels etc.)

· Connect wiring in electrical circuits and networks ensuring compatibility of components

· Prepare and assemble conduits and connect wiring through them

· Prevent breakdown of systems by routinely inspecting and replacing old wiring and insulated cables, cleaning circuits etc.

· Perform effective troubleshooting to identify hazards or malfunctions and repair or substitute damaged units

· Carry out electrical and system works using hand tools or power tools.

· Check wiring and electric status for danger and faults.

· Fit electrical system and equipment according to project specifications.

· Maintain tools and equipment.

· Perform task in accordance to safety procedures.

Read and interpret blueprints and other technical specifications to ensure accurate installation and maintenance of plumbing systems.

• Install, repair, and maintain pipes, fixtures, and appliances for water, gas, steam, and other plumbing systems.

• Inspect and test plumbing systems for leaks, pressure, and flow.

• Collaborate with other plumbers, engineers, and maintenance personnel to develop project plans and strategies.

• Adhere to safety procedures and guidelines, including the use of personal protective equipment and proper handling of tools and equipment.

Strong knowledge of plumbing systems and components, including pipes, fittings, and fixtures.

• Ability to read and interpret blueprints and technical specifications.

• Strong skills in using a variety of hand and power tools safely and effectively.

• Strong attention to detail and organizational skills.

• Excellent written and verbal communication skills.

• Ability to work independently or as part of a team.

A mechanical technician in a chemical plant plays a crucial role in ensuring the smooth and safe operation of the facility. Their job scope encompasses a wide range of responsibilities, including:

Job Responsiblities

• Responsible for the maintenance, repair, and troubleshooting of various mechanical equipment, including pumps, compressors, turbines, conveyors, and heat exchangers.
• Diagnosing faults, and carrying out repairs or replacements of piping systems, including installation, inspection, and leak detection.
• Maintenance and calibration of instruments used to monitor and control process parameters, such as pressure, temperature, and flow rate.
• Participate in the installation and commissioning of new equipment, ensuring proper alignment, connections, and functionality.
• Perform scheduled inspections and preventive maintenance tasks on equipment to identify potential problems. Adhere to safety procedures and regulations, ensuring a safe working environment for themselves and others.
• Maintain accurate records of all maintenance and repair work performed, including work orders, parts used, and repair details.
• Assist in training other technicians or apprentices.
• Managing the inventory of spare parts and tools.

Skills, Knowledge & Requirements

• Ability to diagnose and troubleshoot mechanical problems effectively.
• Strong safety awareness and commitment to safety practices and regulations.
• Ability to communicate effectively with colleagues, supervisors, and operators.
• Minimum 8 years experience in local process plants

• Update and ensure accurate maintenance of employee database, profiles and other HR-related information.
• Ensure on the necessary for a smooth onboarding of documentations for new hires or exit processes.
• Provide administrative support for all employment matters.
• Following up on course registration, after-training evaluation, etc and maintain up-to-date training forms/ records.
• Assist in planning, coordinate and organise company events. Includes sourcing and coordinating with external and internal vendors.
• Assist in managing the maintenance and housekeeping of office premises and equipment.
• Support the team in various projects and initiatives as needed.
• Assist with general administration of various departments within the organization and other ad-hoc tasks as assigned.
• Handle correspondence, including emails and phone inquiries, in a professional manner.

Important Notes:

• Ability to work independently and collaboratively within a team.
• Proficient in Microsoft Excel, Microsoft Word and Microsoft Power Point.
• Positive attitude and willingness to learn.
• Demonstrate workplace integrity and uphold respect, honesty, responsibility and accountability.

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (1 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.

Responsibilities:

• Coordinate purchasing activities for materials and services based on company’s needs
• Handle quotation, issue purchase order and maintain updated records
• Track orders and ensure timely delivery
• Update internal databases with order details
• Conduct market research to identify pricing trends
• Evaluate offers from vendors and negotiate better prices
• Vendor sourcing activities
• Prepare reports – Price evaluation report, expenses report and etc
• Performs other duties as assigned

Requirements:

• Good understanding of supply chain procedures
• Hands on experience with purchasing software
• Computer skills in Microsoft Office Suite (Word, Outlook, Excel and Power Point)
• Meticulous “eye” for detail and accuracy
• Min. 2-3 years of work experience
• Min. Diploma or Bachelor’s degree
• Able to create and administer a task priority list based on company’s needs
• Desire to grow, take on new responsibilities and establish yourself on our team

Other Information:

• 5 working days, Monday to Friday (8.00am to 5.30pm)
• Two ways company transport provided at Boon Lay & Pioneer MRT station
• Permanent Full Time role

Job Description:

• Lead a team of professional & technical trained staff in planning, daily operations, liaise with clients, consultants, sub-contractors & relevant authorities.
• Ensure the construction project complies with all building codes and any other legal or regulatory requirements.
• Responsible for overall project planning, scheduling, monitoring and updating to meet targets.
• Manage the project sites and operations by overseeing the day to day running of all matters related to the construction of the project.
• Assist in the planning and sequencing of construction operations.
• Reporting to the higher Management.
• bility to deal effectively with all consultants, construction teams, and relevant authorities.
• Ability to clearly and effectively express ideas, thoughts, and concepts verbally and in written form.
• Coordinate with relevant parties to manage the progress of the project to make sure that the schedule is kept.
• Lead team to manage project operations, schedule, and specifications.
• Manage operational costs to keep costs within the budget.
• Manage site document filing and record-keeping in accordance with the International Organisation for Standardisation (ISO) standards.
• Manage subcontractors’ activities to ensure compliance with contract requirements.
• Monitor compliance of work with workplace safety and health regulations.
• Monitor the quality of project delivery to make sure they meet project requirements and regulations.
• Oversee the project team and subcontractors in the delivery of the project to meet the completion date.
• Provide leadership to the project management and construction team.

Requirement:

• Possess Degree in Civil Engineering / C&S / Construction Management or equivalent.
• Have an ownership attitude, be willing and able to grow, coach and mentor.
• Able to manage a site team and liaise with sub-constractors and consultants.
• Knowledge of AutoCAD, Microsoft Project, Microsoft Office is a must. Others acquired skill will be an added advantage.
• Experience in Structural Steel will be an added advantage.
• Relevant certificate – BCSS / StS – etc.

• Applies various finishes to buildings, rooms, or other structures, including primers or sealers.
• Prepares, cleans, and tapes all jobsites.
• Removes old paint coating, if necessary.
• Mixes colors or oils to obtain desired color or consistency.
• Moves necessary materials around jobsite as assigned.
• Cleans up worksite debris.
• Capable of receiving and following instructions and communicating with co-workers
• Able to read and adhere to labels, safety warnings, and guidelines
• Attentive to detail and always alert to ensure safety

• Read blueprints and drawings and take or read measurements to plan layout and procedures
• Determine the appropriate welding equipment or method based on requirements
• Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)
• Operate angle grinders to prepare the parts that must be welded
• Align components using calipers, rulers etc. and clamp pieces
• Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)
• Repair machinery and other components by welding pieces and filling gaps
• Test and inspect welded surfaces and structure to discover flaws
• Maintain equipment in a condition that does not compromise safety

Scaffolders are primarily responsible for assembling and disassembling temporary metal scaffolds, platforms, and staging that allow other construction personnel to work safely at heights. The responsibilities include, but are not limited to, the following:

• Assessing the type of scaffold necessary and planning the layout according to the project specifications.
• Checking the site conditions and preparing the foundation needed for scaffolding installation.
• Erecting scaffolding poles and attaching horizontal tubes to them.
• Fixing the scaffolding to buildings or structures and making sure it is stable.
• Ensuring that scaffolding platforms are solid, safe, and well-guarded.
• Dismantling scaffolding upon the completion of construction activities.
• Adhering to safety guidelines and standards to prevent accidents or injuries.
• Conducting regular checks and maintenance of scaffolding equipment.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Assist in the design, development, and implementation of physical security systems, including access control, CCTV, and intrusion detection systems, for industrial facilities
• Ensure designs adhere to security-by-design principles and industry standards
• Conduct site assessments to identify security risks and recommend appropriate solutions
• Collaborate with cross-functional teams, including but not limited to clients and site team to ensure seamless integration of security systems
• Prepare technical documentation and reports as required
• Any other duties to be assigned from time to time

Pre-requisites

• Bachelor’s degree in Electrical Engineering or a related field
• Minimum 3 years of experience in electrical engineering with a focus on physical security systems in industrial plants or similar settings
• Knowledge of security-by-design principles and best practices
• Familiarity with industry standards for security systems (e.g., ISO 27001, UL 294)
• Strong problem-solving skills and attention to detail
• Excellent communication and teamwork abilities

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (3 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.

Job Description
To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring, and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials, and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements.
• Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Job Requirement

• Degree in with degree in Civil, mechanical or equivalent
• At least 1 - 2 years relevant experience in construction site
• Prior experience in Refinery / Process Plant on Civil and/or Mechanical projects execution will be advantageous

• Preparing / catering of all necessary submissions i.e. shop drawings, samples, data sheets etc.
• Processing work orders, delivery orders,paperwork, etc.
• Monitoring and managing all phases of projects development and schedules.
• Coordinate and building good rapport with the clients.
• Ensure proper tracking and reporting of projects development.
• Work as assigned.

Job Requirements:

• Preferably 3 years experiences in construction field
• Proficient in microsoft wors,excels.

DIGIE ENGINEERING TECHNOLOGY PTE. LTD. is a consultancy firm based in Singapore. DIGIE is one of the world’s trusted providers of one-stop BIM services throughout the entire building construction cycle. DIGIE specializes in Building Information Modelling (BIM) Services, catering of project BIM management, BIM consultancy, CDE development, data management.

DIGIE is a subsidiary of POWERCHINA Huadong Engineering Corporation Limited (hereinafter referred to as “HDEC”), a Chinese state-owned key enterprise founded in 1954. Headquartered in Hangzhou, HDEC has its overseas projects in over 50 countries and regions in Asia Pacific, Eurasia, Middle East and North Africa, South and Eastern Africa, Central and West Africa and Americas.

Administrative Responsibilities:

1. Oversee daily office operations, including procurement, facility maintenance, and vendor management.
2. Manage company fixed assets and ensure proper documentation and filing.
3. Ad-hoc from C-level

Human Resources Support:

1. Assist in the recruitment process, including job postings, resume screening, and interview scheduling.
2. Handle onboarding and offboarding procedures, as well as updating employee records.
3. Support performance management activities.
4. Payroll support.
5. Assist the regional HR Manager in implementing policies and processes, such as labor contract management, benefits.

Job Description

• Researches, plans, coordinates and proposes original designs of mechanical products and systems. Performs testing of prototype and production equipment.
• Participates in customer and project review meetings relating to project assignments. Reports and presents information as required.
• Analyzes projects work scope to develop and coordinate design/drafting manpower requirements for project demand and scheduling.
• Assists in conceptual customer design proposal, identification of application. Prepares designs and layouts that define equipment concepts, or the basic functional characteristics of systems, components, structures or equipment.
• Leads design staff, on a project basis, in analyzing design alternatives. Suggests design options and prepares layouts illustrating the need of the customer.
• Review complete product layouts, working from detail drawings and sub-assemblies. Prepares and review all levels of engineering calculations.
• Create, check and review TCE and Engineering documentation through the ECN process
• Is responsible for project status for on-time delivery, productivity and quality and safety of design. Reports as required on assigned projects.
• Provide a link with the Product Groups to transfer new technologies or design improvement to the operations
• Follow all TFMC rules and procedures for Engineering, Quality, Environment, Health and Safety.
• Conducts and prepare design reviews
• Conduct SITs
• Goes on field assignments for new products installation and commission
• Provides technical support to manufacturing and marketing

Requirements

• Mechanical engineering degree (minimum honors, masters preferred) or minimum ten years related design/drafting experience within FMC engineering
• Knowledge of TFMC products and manufacturing processes or related experience preferred.
• Ability to perform high level engineering calculations.
• Experience in leading and supporting others in team building and time management skills.
• Skills include design, product knowledge, enabling technology, and computer skills.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Take charge of multiple iOS projects.
• Address and resolve bugs while enhancing existing projects as new requirements arise.
• Develop reusable code that can be efficiently shared across all projects.

Requirements:

• Dip / B.S in Computer Science or related fields.
• 2+ years’ experience in software development. Qualified fresh graduates are welcome to apply.
• Strong programming background and proficient in at least one programming language (Java / node.js / Objective-C / Swift / C / C++). Good knowledge in iOS or Android programming, hardware and OS features.
• Experience with using AWS Cloud Services is a plus.
• Experience with connecting sensors and sending MQTT messages is a plus.

· To oversee store and maintenance operations.

· To uphold safety as priority at all time at store.

· To raise Material Requisition Form for store consumable items according to item Re-Order-Point.

· To implement warehousing/finished goods management to ensure the efficient and accurate receipt, handling and storage of materials and assemblies accordance to ISO9001 and Occupational Health and Safety (OHS) Policy.

· To ensure warehouse activities are efficient and economical utilization of facilities for storing and distributing raw material and finished goods inventories.

· To manage good receipts, resolving discrepancies, to maintain required safety stocks

· To generate Monthly Inventory Report to Finance Department.

· To ensure all material/inventory is correctly accounted for, reporting delivery discrepancies and organizing regular stock takes.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards &contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client &regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in precast work planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional, and related sectors.

With offices across Europe, Asia, and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for Recruitment/Sales Intern- Engineering Services-Pharma to join us on an Internship to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Build your network by engaging with candidates as a talent acqusition/recrtuiter
• Build and strengthen your network of candidates via cold calling, and face to face meetings
• Continually seek opportunities to increase customer satisfaction, driving continuous improvement initiatives.
• Build a network of clients to sell out outsourced technical solutions.
• Must be in the last semester of your studies as a full time job could be available for the right talent.

If you'd like to find out about this opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal-opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing on employment skills and we confirm that we are happy to accept applications from persons of any background for this role.