Roles & Responsibilities

Driver - Responsibilities

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company lorry to pick up workers, to or from site, office and dormitory etc.

1.1 The Driver must drive the vehicles to the required work sites punctually.

1.2 The Driver must follow the schedule or ad-hoc obtained from the Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

1.3 The Driver must inform the Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

1.4 Aside from driving the workers to site, rest of the time will be to support office courier needs.

2 Usage of Company vehicles

2.1 The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

2.2 The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. Otherwise, costs will not be reimbursed.

3 Safety

3.1 The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

3.2 If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

3.3 The Driver must inform the Director or PIC immediately that he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

3.4 The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

3.5 The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

4.1 The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

4.2 The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

4.3 The Driver will drive the vehicles to Inspection Centres as required.

The above is an overview of the work scope and responsibilities of a Driver employed by the Company. It is by no means an exhaustive list. There may be other scope and responsibilities deemed normal by the industry which by default will be included in this Appendix.

Schedule:

Day shift: 5.5 days per week

Requirement:

1. Minimum Class 3 Singapore Driver's license

2. Familiar with the marine industry procedures

3. Good driving track record

4. Familiarity with Singapore roads and ERP time

5. This job may require some late work. OT allowance will be given.

6. Fit and in good health

Duties

• Create CNC programs, plan tooling & fixture for Mill & Turn machining
• Generate routing processes in ERP system
• Estimate machining cycle time each routing processes
• Perform technical planning and specification of the production process
• Production schedule, loading & capacity
• Liaise with customers for technical and specification require
• Establish PMP (Process Management Plan) as per customer requirements
• Analyze existing capacity & resources and propose for optimizing utilization
• Technical support for daily manufacturing process including design jig & fixtures
• Review existing processes and establish the best machining processes
• Propose new ideas for continuous improvement
• Mastercam / Solid cam

Requirements

• Min. 5 years experience in a manufacturing environment, preferably in precision Engineering
• Advanced/Higher/Graduate Diploma/Post Graduate Diploma in Mechanical /Manufacturing Engineering field preferred
• Strong in technical skill and able to read mechanical drawing
• Possess knowledge of CNC & CAD programming, Solidwork/Solidcam, Mastercam
• In-depth knowledge of machining processes
• Efficient in Microsoft Office
• Able to work independently and as a team
• Handles multi-tasking and stress well

Responsibilities

• Safely and efficiently transport goods from the batching plant to customer sites, providing excellent customer service.
• Unload goods at designated job sites within the specified time frame.
• Maintain cleanliness of assigned trucks at all times.
• Ensure mixer drums are free of hardened concrete.
• Perform visual checks on concrete slumps and follow standard procedures.
• Conduct truck maintenance according to the maintenance checklist at planned intervals.
• Deliver delivery orders (Do's) to customers, ensuring they are signed and returned to the plant.
• Perform additional tasks as instructed.

Requirements

• Proven experience as a truck driver in the logistics department or a similar role.
• Valid Class 4 Driving License.
• Clean driving record preferred.
• Strong knowledge of GPS usage and route planning.
• Solid understanding of truck driving rules and regulations.
• Ability to work long hours.
• Quick decision-making skills.
• Hardworking, trustworthy, and good at time management.

Duties:

• Operate CNC machine.

操作数控机器（铣床/车床）

• Able to sets up jigs, fixtures and tooling required for machining process.

能够设置加工过程所需的夹具

• Able to write simple programs for CNC Milling machines

能够为CNC铣床编写简单的程序

• Able to interpret technical drawing and familiar with drawing symbols

能够理解技术绘图和熟悉绘图符

• Knowledge and familiarity with machine cutting tools and application of cutting parameters

熟悉机床切削工具和切削参数的应用

• Perform in-process inspection of parts and document results when necessary

必要时执行零件的检查过程和文件结果

• Ensure efficient machine setup, run time and achieve the desired quality expectation of parts

确保有效的机器设置，运行时间和达到部件质量期望

• Comply with company safety rules and regulations

遵守公司安全规则

• Maintain good housekeeping practices

在机器和工作区保持良好的事务管理

Requirements:

• NITEC/ITE/Technical Certificate in Mechanical/Precision/Tool and Die Engineering or equivalent

NITEC / ITE / 机械工程文凭或相等文凭

• Preferably with at least 1-2 years of CNC machining experience in Precision Engineering

至少有1-2年在精密/塑料环境中的CNC加工经验

• Able to read and interpret blueprints

能够阅读和理解蓝图

• Experience in CNC routers is highly advantageous

拥有使用CNC路由器的经验为佳

• May need to work night shift as required可能需要按要求上夜班
• No experience, provide training 无经验，提供培训
• Fresh graduates / No experience welcome to apply 应届毕业生/无经验欢迎申请
• Salary neg. depend on your experience and qualification. 新水面谈， 取决于您的经验和资格。

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Understanding Client Needs - Dive deep into understanding our clients’ goals and preferences, ensuring that our marketing efforts align perfectly with what they’re looking for.
• Analyzing Data - Keep an eye on the numbers! You'll track campaign performance and client engagement to see what’s working and what can be improved.
• Collaborating with the Team: Work closely with our consultants to ensure that our marketing strategies align with their client interaction and advice.
• Bringing Fresh Ideas - We love innovation! Share your creative ideas and help us stay ahead of the curve in the financial consulting world.
• Assisting with Events - Help organize and promote webinars, workshops, and other events that showcase our expertise and connect with potential clients.
• Handling Client Feedback - Gather and analyze client feedback to refine our marketing approaches and improve client satisfaction.
• Managing Budgets - Assist in managing and allocating marketing budgets to ensure resources are used effectively.
• Reporting and Metrics - Prepare regular reports on marketing activities and client engagement, providing insights and recommendations for continuous improvement.

Candidate Requirements on the lookout:

• Masters in business administration degree in a related field: We value relevant experience and a proactive attitude just as much. Fresh graduates are welcome.
• Passion for Marketing: A genuine interest in marketing and how it can be used to attract and retain clients.
• Strong Communication Skills: Whether it’s writing engaging content or collaborating with team members, your communication skills are top-notch.
• Creative Thinker: You should bring fresh perspectives and innovative ideas to the table.
• Heart to Serve: We're looking for someone who loves meeting new people and adds value to their day-to-day experiences. If you’re passionate about making meaningful connections and enhancing the lives of those you interact with, we'd love to hear from you.
• Detail-Oriented: We’re looking for someone who pays attention to the small stuff and ensures everything runs smoothly.
• Tech-Savvy: Familiarity with marketing tools and platforms, including social media and analytics tools, is a must.
• Open to Career Opportunities: We have various positions available so this role can be your opportunity and stepping stone to a stable career in finance.
• Team Player: We’re a close-knit team, so being able to work well with others is key to your success here.

We are hiring a skilled and experienced Construction Manager to join our team for a challenging and rewarding role in the construction industry. The ideal candidate should have a minimum of 10 years of experience in construction, with a strong preference for experience in Land Transport Authority (LTA) Singapore’s SPPG (Standard Provision for Roadworks and Streetworks) projects.

Key Responsibilities:

• Oversee and manage construction projects from inception to completion.
• Ensure timely and quality execution of projects according to specifications, budgets, and deadlines.
• Coordinate and collaborate with the Project Office and other key stakeholders to ensure seamless communication and project alignment.
• Actively participate in project management meetings and provide regular project updates.
• Monitor and manage site activities, ensuring compliance with safety regulations and industry standards.
• Resolve any issues or challenges that arise on-site, ensuring smooth workflow.
• Manage project teams and subcontractors, providing leadership and guidance to ensure optimal performance.
• Ability to handle multiple tasks, work under pressure, and meet tight deadlines.
• Ensure proper documentation and reporting in line with company and client requirements.

Key Requirements:

• Minimum 10 years of experience in the construction industry, with a strong background in managing large-scale infrastructure projects.
• Experience in Land Transport Authority (LTA) Singapore's SPPG projects is highly preferred.
• Proven ability to work under pressure and manage long working hours, including a 6-day workweek.
• Excellent communication and coordination skills, with the ability to work effectively with project teams, clients, and other stakeholders.
• Strong problem-solving skills and the ability to make decisions in fast-paced environments.
• Ability to attend and contribute to project management meetings effectively.

Salary & Benefits:

• Salary: $4,300 to $4,600 per month, commensurate with experience.
• Opportunity to work on high-profile and impactful projects in the construction and infrastructure sector.
• Dynamic and fast-paced working environment with opportunities for career growth and development.

If you are an experienced and dedicated Construction Manager with a passion for delivering successful projects and meet the qualifications above, we would love to hear from you!

Job Description

Candidate will be tasked to do the programming for various CNC machines. Company's main machines are laser, turret, pressbrake, bandsaw and plasma cutting.

• Able to interprete sheet metal drawings like panels, claddings etc.
• Have experience in either 1 of the 4 CNC machines - laser, turret, pressbrake or plasma cut.
• Willing to undertake training to do programming for all CNC machines.

Need to have engineering knowledge, comprehension of technical documents. Excellent written and spoken communication skills • Possess troubleshooting skills in engineering works • Proven leadership skills with a large and diverse workforce o Be able to work in a fast-moving environment, under pressure and long working hours, when needed.

We are looking for an energetic, trustworthy, and self-starter candidate who could be handy in paperwork preparation and supervision at the worksite, overseeing projects, maintaining safety protocols, and implementing site procedures. Our ideal candidate is experienced, responsible, and team-focused.

Job Description:

- Prepare weekly reports on vehicle repair status.

- Assist in writing meeting minutes to track outstanding issues.

- Conduct team briefings before starting work.

- Coordinate and manage team assignments and vehicle parking allocation.

- Plan and monitor vehicle sequencing and status for operational tasks.

- Provide documentation support to the Operations Leader for work-related needs.

Job Requirements:

- Degree in Engineering (Mechanical, Electrical, Hydraulic, Automotive, Electrical & Electronics, Mechatronics) or a Diploma in a related field with 5 years of relevant industry experience.

- Strong team player.

- Ability to lead a team effectively.

• Preparing reports: Accounting assistants prepare financial statements, budgets, and other reports.
• Bank reconciliations: Accounts assistants reconcile accounts and expenditures.
• Handling communication with clients: Accounting assistants communicate with clients and vendors about billing and payments. They follow up on money owed and answer questions about bills.
• Payroll: Accounting assistants track hours, calculate deductions, and manage funds withheld for taxes.
• Processing invoices and payments: Accounting assistants prepare and process invoices and payments.
• Assisting in audits: Accounting assistants may assist with audits.
• Maintaining financial records: Accounting assistants maintain financial records and update procedural documentation.
• Working with spreadsheets: Accounting assistants work with spreadsheets, sales and purchase ledgers, and journals.
• Recording and filing cash transactions: Accounting assistants record and file cash transactions.
• Controlling credit and chasing debt: Accounting assistants control credit and chase debt.
• Liaising with third party providers, clients, and suppliers: Accounting assistants liaise with third party
• Handle partial sets of accounts, including Accounts Payable (AP) and Accounts Receivable (AR).
• Ensure timely recording of creditor invoices and payment transactions and follow up with billings and cheque collections.
• Input daily and monthly sales reports.
• Accounting Assiatant need to submit CPF constributions.
• Retrieve and resend invoices, credit notes, and statements of accounts.
• Participate in cash flow calculations and preparation.
• Accounting Assiatant need to follow up company auditor.
• Perform weekly and monthly bank reconciliations.
• Provide administrative support as required.
• Accounting Assiatant assist prepare GST fillings and records.
• Maintain Project Quotation, PO, WO, LOA Signed documents.
• providers, clients, and suppliers.
• Suppliers Agreements prepare and keep records
• Accounting Assistant need to prepare Monthly Invoice for Suppliers
• Maintain Workers Loan List
• OED Survey Need to submit.
• Accounting Assistant need to handle Small Claims Follow-Up Details.
• Checking and responding to emails on daily basis to get updated on the work
• Being consistent, accurate, and great in minimizing errors
• Support audit and tax queries
• Liaise with banks on banking transactions

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Calling

· Perform regular quality assessment on all incoming materials from vendors, in-process fabrication as well as outgoing parts for shipping

· Reject all products and materials that fail to meet quality expectations

· Read mechanical drawings, plans and specifications to understand the requirements of product

· Measure product dimensions and compare final product to the specifications

· Maintain records of testing, information and various metrics e.g. number of defective products per day

· Monitor the use of measuring equipment to ensure it is safe and well-maintained

· Resolve quality-related issues in a timely manner

Your Success Factors

· Minimum 2 years of experience as quality inspector

· Minimum NTC certification in Precision/Mechanical Engineering or any other related fields

· Able to read mechanical drawings/blueprints

· Strong understanding of quality control standards and testing techniques

· Great attention to detail

A PROCESS AUTOMATION ENGINEERING COMPANY IS LOOKING FOR AN AUTOMATION ENGINEER

REQUIREMENT:

- DIPLOMA / DEGREE IN ELECTRICAL POWER AND CONTROL

- A GOOD KNOWLEDGE AND EXPERIENCE IN PLC PROGRAMMING AND TROUBLESHOOTING

- MIN 5 YEARS OF WORKING EXPERIENCE

JOB DESCRIPTION

- PLC DESIGN / PROGRAMMING

- TROUBLESHOOTING

- TESTING, COMMISSIONING OF EQUIPMENT / MACHINERY FOR FOOD & BEVERAGE, CHEMICAL INDUSTRIES ...

-To Project management Coordinate with main-con and consultant for drawing submission, material sample submission and meeting with main-con and consultant

-Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptade layout, single line diagrams, CCTV, data Telcom operational routing diagram, ELV systems, control schematic and writing diagrams

-Identify discrepancies in tender/contract/IFC drawings and raise queries for clarification, A and A ( R and R) + Constriction Filed

- Attend all operational matters related to the daily running of the project and Handle multiple projects simultaneously

-Testing and commissioning for Electrical apparatus

-QA/QC documentation review of engineering deliverables

-LV and HV cables sizing calculations and prepare a bill of material

-Planning workforce arrangement and supervision and working planning

-Giving progress reports regularly to teams and monitoring project schedules

-Prepare Electrical shop and As-builts SLD Rcp drawing

JOB DESCRIPTION

• Manage full spectrum of Human Resources functions including monthly payroll, CPF submission, IR21 tax clearance, and FWL.
• Responsible for day-to-day HR operations such as leave application, attendance, medical leave & etc.
• Liaise with government bodies CPF Board, MOH and MOM.
• Handle application/cancellation, Renewal of work pass for employees on time.
• Maintain all employees data and update of information changes in the payroll system.
• Provide support for office administrative duties, data-entry and filing of documents.
• Answering queries through phone calls/emails.
• Any other ad-hoc tasks assigned

REQUIREMNT

• Diploma in HR Management, Business Administration or equivalent.
• Minimum 2-3 years of relevant working experience
• Good knowledge of local employment laws & HR related matters.
• Pleasant personality, able to communicate well with all levels of people.
• Proficient in MS-Office Word, Excel and PowerPoint.
• Able to multi-task and meet deadlines.

• Supporting project communication systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.
• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation

Requirements

Primary Work Location: Jurong East Hub

Working Hours : 8.30am – 6pm

Qualification : Diploma in Mechatronic, Mechanical, Electrical & Electronic

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.
• Maintain systems and component capabilities through rigorous testing, track cutting-edge trends, search for ways to improve functionality and efficiency, and implement appropriate segments to keep production methods current
• Prepare comprehensive documentation for all electrical designs, including wiring diagrams and schematics, bills of materials, assembly drawings, design changes, test reports, design-validation plans, and reports ensuring that installations and operations conform to standards and customer requirements

Analyze customer and project requirements, and provide technical guidance and recommendations to project teams and stakeholders

● Develop and implement testing and validation protocols to ensure that electrical systems and equipment meet or exceed industry standards and regulations

● Collaborate with other engineers, project managers, and stakeholders to ensure that projects are completed on time, within budget, and to the highest quality standards

● Stay up-to-date with industry trends, technologies, and best practices in electrical engineering, and recommend new tools and techniques as needed

• Leadership: You set the tone for your team’s work environment. By giving clear directions and setting an example, you inspire others to follow suit. For instance, if punctuality is a priority, you’re always on time.
• Communication: Acting as a bridge between upper management and your team, you relay information effectively. You might, for example, convey new company policies and gather feedback from your team to share with higher-ups.
• Performance Management: You track your team’s productivity and quality of work. Suppose a team member is underperforming; you provide constructive criticism and potentially formulate a performance improvement plan.
• Training and Development: You identify skill gaps and recommend training programs. You could mentor a junior team member, enhancing their knowledge for better progress.
• Resource Management: You’re entrusted with managing the tools and materials your team needs. You would allocate these resources wisely to prevent bottlenecks in the workflow.
• Problem-Solving: When issues arise, it’s your job to identify solutions. If there’s a conflict between team members, you would mediate and help find a middle ground.

• Accomplishes construction human resource objectives by selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising job contributions; recommending compensation actions; adhering to policies and procedures.
• Manages sub-contractors by locating, evaluating, and selecting sub-contractors; monitoring and controlling performance.
• Meets operational standards by contributing construction information to strategic plans and reviews; implementing production, productivity, quality, and customer-service standards; resolving problems; identifying construction management system improvements.
• Meets construction budget by monitoring project expenditures; identifying variances; implementing corrective actions; providing non-project annual operating and capital budget information.
• Accomplishes construction project results by defining project purpose and scope; calculating resources required; establishing standards and protocols; allocating resources; scheduling and coordinating staff and sub-contractors; evaluating milestone assumptions and conclusions; resolving design problems; evaluating and implementing change orders.
• Approves construction projects by conducting inspections at critical phases; obtaining approvals from buyers.
• Prevents fines and interruptions by complying with, and enforcing, codes.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.
• Updates job knowledge by tracking and understanding emerging construction practices and standards; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations.
• Enhances organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

• To lead and manage project team to execute works according to requirement.
• To Coordinate with Contractors on the execution of works Involved in coordination and supervisor of civil and structural engineering works Responsible for planning, managing, and ensuring smooth implementation and monitoring of projects.
• To ensure quality and efficiency at site.
• Coordinate, communication among team members, customers, contractors and ensure all works are carried out according to approved drawing/specification
• Provide on-site solution during supervision works
• To lead the installation teams at construction sites to plan and execute works according to the project schedule;
• To ensure that construction projects are completed as per approved drawings within the required deadline and allocated budget;
• To ensure efficient utilization of manpower, raw materials and consumables for our construction projects at construction sites;
• To oversee the works and resolve any technical issues/ difficulties that may arise on constructions sites;
• To ensure the works at construction sites carried out are complying with safe work procedures;
• Ensure site safety in accordance with safe work procedure
• Minimum 3 years of related working experience.
• Willing to do night shift if required.

Role Overview
The Operations Assistant supports the Operations Manager to ensures smooth operations by handling worker passes, safety training, PPE distribution, timecard collection, and other operational tasks.

Key Responsibilities

• Worker Logistics: Assist in planning and coordinating transportation for workers to and from job sites.
• Pass & Safety Compliance: Record, track, and apply for worker passes (e.g., Jurong Island Pass, safety passes) before they expire. Ensure workers meet mandatory training and certification requirements, keep records updated for compliance audits.
• PPE Management: Maintain inventory of PPE and distribute it to workers as needed.
  Ensure PPE records are up-to-date.
• Timecard & Timesheet Management: Collect and review timecards/timesheets from workers at month-end. Ensure records are accurate before submitting to the Accounts department.
• Training Coordination: Monitor workers' mandatory training and enroll them in required courses.
• General Support: Assist the Operations Manager with ad-hoc tasks related to daily operations.
  

Other Requirements: Ability to work in a fast-paced environment and handle multiple tasks.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Calling

· Perform regular quality assessment on all incoming materials from vendors, in-process fabrication as well as outgoing parts for shipping

· Reject all products and materials that fail to meet quality expectations

· Read mechanical drawings, plans and specifications to understand the requirements of product

· Measure product dimensions and compare final product to the specifications

· Maintain records of testing, information and various metrics e.g. number of defective products per day

· Monitor the use of measuring equipment to ensure it is safe and well-maintained

· Resolve quality-related issues in a timely manner

Your Success Factors

· Minimum 2 years of experience as quality inspector

· Minimum NTC certification in Precision/Mechanical Engineering or any other related fields

· Able to read mechanical drawings/blueprints

· Strong understanding of quality control standards and testing techniques

· Great attention to detail

Assist the HR manager to oversee HR Department & manage the full spectrum of HR Functions and adminstration.

• Provide HR support to the Manager on recruitment, performance review, employee relations, compensation & benefits.
• Conduct orientation to new employees.
• General HR administrations, such as preparation of appointment letters, confirmation letters, memo and etc.
• Coordinate with Operations Department to evaluate on the next course of action after being notified of any disciplinary case.
• Conduct exit interview. (For foreign resignees)
• Liaise with relevant ministries and agencies to process Work Permit, S Pass, Employment Pass for Malaysians (TS), Non-Traditional Sources (NTS), People Republic of China (PRC).
• Implementation of HR policies and recommend appropriate practices to ensure consistency and long term substainability of HR policies.
• Carry out any other duties as and when assigned by immediate supervisor or higher management.
• Involved in recruiting process, in connecting workers, negotiations, explainations of contracts.
• To apply, renewal work permits, arranging medical checkups, purchase of security bonds, air tickets for repartiation and home leave employees.
• To apply and ensure MWOC is secured for employees.
• Monitor employee progress and stay abreast on company climate and culture, ensuring it stays positive and productive.
• Demostrate leadership abilities.
• To assist other departments managers when necessary to gain exposure in other areas.
• Undertake any ad-hoc projects assisgned by superior/management team from time to time
• To arrange for Medical/WICA insurance yearly renewal and process any claims pertaining to workers medical/wica case.