Board Roles and Director Duties

Board’s Role

The Board’s role is to:

1. provide entrepreneurial leadership, and set strategic objectives, which should include appropriate focus on value creation, innovation and sustainability;
2. ensure that the necessary resources are in place for the company to meet its strategic objectives;
3. establish and maintain a sound risk management framework to effectively monitor and manage risks, and to achieve an appropriate balance between risks and company performance;
4. constructively challenge Management and review its performance;
5. instil an ethical corporate culture and ensure that the company’s values, standards, policies and practices are consistent with the culture; and
6. ensure transparency and accountability to key stakeholder groups.

Scope of Director Duties

Directors should be aware of their duties at law, which includes acting in good faith and the best interests of the company; exercising due care, skills and diligence; and avoiding conflicts of interest. Directors should also put in place policies, structures and mechanisms to ensure compliance with legislative and regulatory requirements, establish appropriate tone-at-the-top, desired organisational culture and standards of ethical behaviour.

While the duties imposed by law are the same for all directors, a listed Board will generally have different classes of directors (executive, non-executive and independent directors) with different roles:

• Executive Directors (EDs) are usually members of senior management, and involved in the day-to-day running of the business. Executive directors are expected to:

1. provide insights on the company’s day-to-day operations, as appropriate;
2. provide Management’s views without undermining management accountability to the Board; and
3. collaborate closely with non-executive directors for the long term success of the company.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Scope:

• Responsible for all cleaning in and around office buildings.
• Cleans floors and toilets
• Sweeping, dusting and clearing of rubbish
• Spot cleaning glass and windows.
• Any ad-hoc cleaning duties as assigned

Job Requirements

• Physically fit and able to perform heavy cleaning duties like sweeping, mopping and so on.

1. Able to read and understand technical drawings.
2. Must able to do Mitutoyo CMM Programming and Operation.
3. Ensure incoming materials, in-process production and finished products meet by confirm specifications requirements; conducting visual and measurement tests.
4. Follow up corrective actions in production
5. Documents inspection results by completing reports and logs; inputting data into quality database.
6. Able to perform final inspection report for finished products and prepare relevant documents to customer.
7. Evaluate and analyze customers rejections, implement and feedback corrective action.

• At least 5 years' experience in Quality Control
• Basic Computer knowledge to prepare Quality Documents Report
• Able to speak, write and read simple English
• Able to work independently with minimum supervision

Nanyang Environment and Water Research Institute, NTU is looking for a Research Fellow with expertise in chemical reactors to develop an improved prototype for a thermocatalytic process.

The project is funded by National Environment Agency, Singapore to address one of the largest problems in waste management – the problem of plastic waste pollution. A significant fraction of plastic waste has substandard quality for mechanical and chemical recycling even after sorting and cleaning. The Research Fellow will work on the design, fabrication and testing of a chemical reactor system that will use pyrolysis-chemical vapor deposition (CVD) technology for converting these plastic waste streams (specifically, contaminated and rejected plastics) into multi-walled carbon nanotubes (MWCNTs) and hydrogen. The role of Research Fellow is to design a system prototype that can effectively mitigate the impact of impurities from diverse plastic waste streams on production outputs and can be operated in a continuous mode.

Key Responsibilities:

The candidate will be undertaking full research work and administrative duties during the term of employment within the following areas:

• Experimental work on plastic waste conversion into carbon nanotubes and hydrogen.
• Design, procurement, installation and operation of the prototype system;
• Investigation of system performance and determining factors that influence the yield and quality of outputs;
• Development of improvements in system design to mitigate the factors decreasing quality and yield of outputs;
• Development of a continuous process;
• Liaising with vendors regarding the feasibility of scale up and conducting a cost-benefit analysis.
• Publishing research papers and documenting developed intellectual property.
• Reporting the progress to stakeholders (internal and external).

Job Requirements:

• Ph.D. degree in a field relevant to chemical reactor engineering (e.g., Chemical Engineering, Thermal Engineering, Mechanical Engineering, Process Engineering or other).
• PhD thesis or postdoctoral experience related to chemical reactor engineering for at least one of the following areas: (a) catalytic reactors, (b) continuous reactors.
• First-author publications in the areas mentioned above.
• High proficiency in English (e.g., TOELF, IELTS, GRE) for preparation of research papers.
• Ability to prepare well-written technical reports and research papers.
• Ability to prepare decent quality presentation decks, figures and illustrations.
• Ability to build formal and informal partnerships and work collaboratively with others to meet shared objectives.
• Ability to consistently achieve results, even under challenging circumstances.

We regret to inform that only shortlisted candidates will be notified.

Job Summary:

We are seeking a dedicated and skilled Workshop Executive to manage the fleets of vehicles maintenance project. The successful candidate will be responsible for overseeing the maintenance, repair, and efficient operation of our vehicle fleet, ensuring all project milestones and deadlines are met.

Key Responsibilities:

• Manage the day-to-day operations of the Automotive workshop, including scheduling and supervising maintenance and repair activities.
• Ensure all vehicles are maintained in optimal condition and comply with safety standards.
• Coordinate with suppliers and vendors for parts and services.
• Monitor and manage the fleet budget, ensuring cost-effective operations.
• Maintain accurate records of all maintenance and repair activities.
• Develop and implement preventive maintenance programs.
• Train and supervise workshop staff, ensuring high performance and adherence to safety protocols.
• Collaborate with other departments to ensure the smooth execution of the project.

Requirements:

• Diploma in Mechanical Engineering, Automotive Technology, or a related field.
• Proven experience in fleet management, vehicle maintenance, and workshop operations.
• Strong knowledge of automotive systems and repair techniques.
• Excellent organizational and project management skills.
• Ability to lead and motivate a team.
• Strong communication and interpersonal skills.
• Proficiency in using fleet management software and tools.
• Ability to work under pressure and meet tight deadlines.
• Valid driver’s license

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Implement established project plan; monitor progress and performance against the project plan, identify, resolve or escalate operational problems to minimize delay
• Analyse project requirement and perform standard technical calculations
• Coordinate the activities of external contractors to project integration and satisfactory standards of service
• Estimate the costs, resources and time required to complete the assigned phase of an engineering project and monitor activities, allocate resources and assign tasks to ensure targets are met
• Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
• Set priorities, allocate tasks, and coordinate with project staff to meet project targets and milestones
• Any other duties to be assigned from time to time

Pre-requisites

• Bachelor’s Degree in Electrical Engineering
• Minimum 5 years of relevant experience in power and/or industrial plants construction projects required
• Hardworking, independent, resourceful, energetic and dynamic
• Ability to handle stress and be sensitive to deadlines.
• Proactive learner and ability to multi-tasks
• Willing to work long hours and under construction site conditions
• Project location: Jurong Island

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Supervise construction works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, design intent, approved drawings and site instructions by the supervising qualified persons
• Ensure that site personnel carry out their work in compliance with the prevailing regulations set up by the building authorities and government agencies of Singapore
• Perform tests to check the quality of materials
• Review project drawings and specifications, and raise any discrepancies and/or potential problems to the appointed Qualified Person and relevant stakeholders
• Attend meeting with qualified persons and relevant stakeholders
• Prepare progress reports
• Work under the control and direction of the appointed Qualified Person(s) when carried out his/her duties for the assigned project
• Any other duties as assigned from time to time

Prerequisites

• Diploma/Degree in Civil & Structural Engineering
• Accredited as a C&S Resident Technical Officer (RTO) by Institution of Engineering Singapore (IES) or Association of Consulting Engineers Singapore (ACES)
• Certificate in BCSS (Building Construction Safety Supervision) or other similar construction-safety certification
• Minimum 2 years of experience as a Resident Technical Officer (RTO)
• Able to read and interpret architectural drawings and details of construction projects
• Candidates with experience working in live plant conditions have added advantage
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Supervise and ensure that mechanical work activities are performed in a safe and timely manner while adhering to specifications and codes
• Responsible for organising mechanical works, delegating tasks and managing workers on site
• Assist the Mechanical Engineers in planning and monitoring of construction work progress.
• Any other duties to be assigned from time to time

Prerequisites:

• Minimum 3 years' relevant work experience in construction industry
• Knowledge of static and rotating equipment and/or Steam or Gas Turbines
• Ability to manage and handle workers
• Possess a strong commitment to workplace safety

Responsibilities

· To only carry out any lifting operation when a lifting supervisor is present or has approved the carrying out of such operation.

· To only engage in acts or manoeuvres per the standard practice or company’s SOP.

· To ascertain whether the ground conditions, on which a mobile crane is to be operated, are safe for travel and suitable for any lifting operation.

· To only use the crane for operations for which it is intended.

· To only manoeuvre or hold suspended loads over public roads or areas after that road or area has been cordoned off.

· To ensure that any outrigger, when it is required, is fully extended and secured.

· Before the start of every work shift, perform operational tests on all limit switches under no load conditions before any lifting operation is carried out and enter the results of such tests in a form or checklist specified by the management.

· To report any failure or malfunction of the crane to the lifting supervisor.

· To ensure that any stationary truck-mounted or wheel-mounted crane is adequately and securely blocked on a slope.

· To only hoist objects for which the weight has been ascertained.

· To only hoist loads if the path of the manoeuvre is clear and to report obstructions, if any, to the lifting supervisor.

· To only hoist loads when a certified signalman has received a clear signal.

· Attend daily toolbox meetings with supervisors and workers for effective consultation, communication and coordination before the commencement of work.

· Perform any other tasks as may be assigned by the supervisor.

· Ensure compliance with relevant government regulations and the company’s quality, safety, health and environmental (QSHE) policies, practices and procedures.

Requirements

· Minimum 5 years of working experience in a similar capacity in marine or related industry.

· Knowledge and understanding of construction safety rules and procedures.

· Valid crane operator license.

· Physically fit due to the requirement to climb in and out of the crane cabin and to see and hear lifting supervisors, signalmen, HSE personnel etc.

· Good communication skills.

· A team player with the ability to work independently as well as in a team.

Job Description

• Prepare, manage, and facilitate design drawings utilizing BIM, Rino, Grasshopper and CAD technologies.
• Ensure all models are compatible and that BIM data is accessible to all project participants.
• Oversee coordination between architectural and structural interfaces, collaborating with main contractors and other trades for effective cross-team support.
• Work closely with the design team and other relevant departments to ensure all drawings meet design specifications.
• Manage design changes and revisions, addressing any discrepancies and queries between design and project teams.
• Attend site meetings as required and perform additional tasks as needed.

Requirements

• Degree in Architecture, Civil Structural Engineering, or a related field.
• Minimum of 4 to 5 years of relevant experience in construction and architectural projects.
• Proficiency in Revit, Navisworks, Rino, Grasshopper, AutoCAD, and MS Office.
• Knowledge of DGN, DWF, IFC, and MicroStation is a plus.
• Strong project management and decision-making skills.
• Ability to work effectively as part of a team as well as independently with minimal supervision.

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

PM Group is an international project delivery company operating across Europe, the USA and Asia. We have a 43 year track record in project management, process design, facility design and construction management for leading multinational companies. We are now recruiting for Project, Process and Mechanical Engineer Intern in Singapore.

Job Summary

Project Engineer (intern)

• Support and assist the Project Managers in their duties and to carry out cost research and general department duties
• Develop and maintain collaborative relationships with our clients
• Have the opportunity to communicate with both internal and external stakeholders
• Learn on establishing project objectives in line with our clients and ensure goals and timelines are archieved
• Support in executing of projects via the PM Group Quality and Management systems
• Assist in projects technical and commercial delivery
• Train and learn to develop and implement appropriate project execution strategy(s) and maintain project budget
• Ensure compliance with local statutory and regulatory obligations

Process Engineer (Intern)

As a Chemical Engineering professional at PM Group, you will work as part of a multi-disciplined team on projects in the following sectors – Mission Critical, Pharma, Med Tech, Advanced Manufacturing, Food and Energy. Your work assignments will involve rotation through different projects, covering areas such as:

• Process Safety
• Process Plant Operation
• Process Optimization/Modelling
• Process Unit Operations
• Design Calculations
• Project Management

Mechanical Engineer (Intern)

• Prepare HVAC and Building Services basis of design documents
• Involve in equipment and personnel heat loads and generation of HVAC heat load calculations
• Coordinate with team members on preparing equipment list, schedules, datasheets and specifications for HVAC and Building Service equipment
• Learn & understand sub-contractor scopes of work for HVAC and Building Services

Office location: International Business Park (Jurong East)

Work arrangement: Hybrid - Work-From-Home & in office

Period: Jan to Mar/Apr 2025

About the Role:

We are seeking a seasoned Senior Product Development Manager with over 10 years of experience specializing in the design and development of automation products for bioenvironmental applications. This position focuses on driving innovative projects in Industrial Automation, Bio-Environmental Monitoring, and Consumer Electronics, managing the complete product development lifecycle to deliver high-quality, technically advanced, and manufacturable solutions.

You will bring in-depth knowledge of electronics, embedded systems, full-system automation, and mechanical integration to design and guide fabrication teams, producing innovative products and prototypes for industrial and academic clients.

Key Responsibilities:

1. Product Development & Lifecycle Management

• Lead the entire product lifecycle, from concept creation to batch mass production, ensuring on-time delivery and cost-effectiveness.

2. Circuit Design

• Design and develop high-performance analog, digital, and mixed-signal circuits, focusing on low-noise designs, high-resolution ADC/DACs, and high-speed communication interfaces.

3. PCB Design & Manufacturing

• Execute PCB design using tools like Altium Designer, incorporating Design for Manufacturability (DfM) and Design for Testability (DfT) principles.

4. Embedded Systems Development

• Program and debug firmware for microcontrollers (MCUs) and system-on-chips (SoCs), optimizing for performance and energy efficiency.

5. Data Communication Systems

• Develop robust communication protocols, including I²C, SPI, RS232, RS485, and other bus systems, integrating sensor networks and actuator controls.

6. Mechanical Integration

• Collaborate with and review mechanical designs using tools like SolidWorks and AutoCAD, ensuring seamless electronic-mechanical compatibility.

7. System Testing & Quality Assurance

• Conduct Design Failure Mode and Effects Analysis (DFMEA), tolerance analysis, reliability testing, and EMI/EMC validation to meet regulatory and quality standards.

8. Bio diagnostics

• Apply hands-on expertise in bio diagnostics, driving the development, testing, and optimization of diagnostic tools and processes.

9. Prototyping & Troubleshooting

• Oversee prototype development, testing, and root-cause analysis to resolve hardware and firmware issues promptly.

10. Interdisciplinary Collaboration

• Work closely with mechanical, software, and quality assurance teams to deliver integrated and cohesive product designs.

11. Documentation & Compliance

• Maintain comprehensive project documentation to ensure adherence to ISO standards and regulatory requirements.

Requirements:

Technical Expertise:

• Proficient in Altium Designer; experience with OrCAD or Eagle is a plus.
• Advanced programming skills in C, C++, and Python, with experience in embedded systems and RTOS environments.
• Strong knowledge of analog and digital design principles, including power electronics and high-frequency PCB layouts.
• Hands-on experience with microcontrollers, FPGA programming, and single-board computers (e.g., Raspberry Pi).
• Expertise in communication protocols: I²C, SPI, RS232, RS485, UART, and their applications in IoT systems.
• Experience in sensor integration, including temperature sensors, photo detectors, and flow meters.
• Proficiency in mechanical CAD tools for cross-disciplinary collaboration; SolidWorks and AutoCAD preferred.
• Practical experience in GUI development and familiarity with Linux-based environments (e.g., Ubuntu).
• Knowledge of P&ID diagrams, microfluidic system design, and control methodologies.
• Strong analytical and problem-solving skills, with expertise in (D)FMEA, design optimization, and quality management systems.
• In-depth understanding and hands-on experience in bioprocessing systems, particularly in E. coli detection and diagnostics.
• Expertise in developing and implementing diagnostic methods for microbial monitoring, including biosensors and other analytical tools.

Industry Expertise:

• Experience in water quality monitoring systems and microbial monitoring technologies.
• Familiarity with fluidic control systems, including valves, pumps, and flow control mechanisms.

Soft Skills:

• Excellent communication skills, with the ability to document and present technical concepts effectively.
• Proven ability to excel in fast-paced, collaborative environments.
• Proficiency in MS Office tools (Word, Excel, PowerPoint); experience with Power BI and Visio is a plus.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional, and related sectors.

With offices across Europe, Asia, and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for Recruitment/Sales Intern- Engineering Services-Pharma to join us on an Internship to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Build your network by engaging with candidates as a talent acqusition/recrtuiter
• Build and strengthen your network of candidates via cold calling, and face to face meetings
• Continually seek opportunities to increase customer satisfaction, driving continuous improvement initiatives.
• Build a network of clients to sell out outsourced technical solutions.
• Must be in the last semester of your studies as a full time job could be available for the right talent.

If you'd like to find out about this opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal-opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing on employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Key Responsibilities:

• Manage full accounts cycle, including bank reconciliation and journal entries.
• Ensure accurate data entry in for all transactions.
• Prepare financial data for entry into the financial system
• Keep accounting records and bank statements
• Ensure timely, accurate month-end and year-end closing
• Prepare and file GST returns
• Preparation of tax computation and tax planning
• Filling tax returns on time and updating the management about new changes in rules and regulations.
• Liaise and coordinate with external auditors and tax agents;
• Ensure accounting deadlines are met;
• Review subsidiary accounts
• Other ad hoc duties

Job Requirement

• Diploma in Accountancy or equivalent.
• Minimum 2 years of relevant accounting experience.
• Have prior experience in handling full set of accounts and statutory reporting
• Independent to fulfil tasks and a team player to perform tasks in the company workflow

*Expected to conduct equipment training*

The Job:

Training

1. Achieve annual department budget and targeted trainee participation
2. Provide guidance to trainers for conduct of WSQ courses with alignment to stat board regulatory requirements
3. Upkeep SSG ATO and ITE COJTC status as an accredited training provider
4. Develop training programs on MHE and collaborate with Subject Matter Experts for smooth delivery of training course syllabus

Curriculum Developer:

1. Develop new coursewares (Product and Process) to meet market trend and demands
2. Submit new coursewares for regulatory approval for course commencement
3. Enhance existing coursewares to meet regulatory requirements
4. To maintain course registry records and filing

The Person:

• Min Diploma – preferably Engineering
• Attained full WSQ DACE/DDDLP certification
• Min 3 yrs of experience
• Possesses Class 3 and Forklift license and has experience operating it, comfortably
• Written and oral communication skills, specifically an ability to engage an audience on training topics to solidify adoption of product.
• Effectively bi-lingual in English and Mandarin
• Develop and design courses/curriculum for all learning needs.
• Knowledge on WSH requirements
• To integrate teaching methodologies, learning styles and educational materials for better engagement to meet learning outcomes
• Must be able to do stand-up trainings for internal and external stakeholder
• Experienced in developing training plans
• Sales and marketing of courses
• Full Advanced Cert in Training and Assessment (ACTA)

Responsibilities

• Perform Reliability, Maintainability and Supportability (RMS) analysis, to ensure an effective through life support capability package to support the System.
• Engage design engineers on design specifications and influence Reliability and Maintainability (RAM) in their design.
• Engage customers and contractors, and to ensure RAM and ILS deliverables are on schedule and of quality.
• Lead ILS team of technical writers, technical trainers and supply support management to ensure supportability of the Systems.

Requirements

• Degree in Mechanical Engineering or Mechatronics Engineering or equivalent.
• Preferably RAM and ILS knowledge. Training / OJT will be provided, if not equipped with basic statistics skills.
• Preferably knowledge in either Automotive and/or Artillery systems.
• Meticulous in quantitative analysis and strong in statistical analysis.
• Good leadership skills and project management skills.
• Strong communication & interpersonal skills.
• Entry Level candidate are welcome to apply

1. Manage and control daily work activities at Mechanical and Electrical project sites of Fusion Engineering & Services Pte Ltd at various locations in Singapore (Construction and plant maintenance work). Applicant should be well versed in reviewing contract documents and submitting quotations with a proactive approach

2. Applicant shall implement safe work practices at the job site to work towards Zero LTI

3. Applicant should have sound experience in managing manpower and execution of project sites

4. To work closely with the owner, client, sub-vendors, main contractors, and suppliers

5. Manage and Execute the project activities including Quality to ensure that the project is completed according to the planned schedule

6. The Project Manager shall be responsible for ensuring that the project execution is according to the project Safety and quality requirements

7. To maintain project documentation at all phases of construction

Salary: $2400-$2800+allowances+OT=>$3300-$4000++

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Mon to Fri 3 rotating shift

Job Description

• Operate and monitor machinery on the assembly line to ensure smooth operation
• Conduct routine maintenance tasks on machinery as needed
• Identify and address any issues with machine operation
• Utilise mechanical and electrical knowledge to troubleshoot and repair production machines
• Conduct regular inspections to identify potential malfunctions and perform preventive maintenance

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

ALATAS Crane Services Worldwide is a worldwide operating crane & deck machinery service specialist and offers crane and hydraulic related services and parts supply in the Ship, Offshore, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

Our workshop operations are geared to repair marine machinery, hydraulic machinery and accident repairs on steel structures, details are here: www.alatasworkshop.com

As a manager of our workshop repair operations, and to support our filed service we are employing a Workshop Manager as follows:

JOB DESCRIPTION:

• Must be able to solve technical issues in relation to complex machinery/fabrication works repairs for internal and external stakeholders
• Capable of negotiating and communicating effectively with clients, as well as managing tenders, proposals, and quotations
• Oversee and ensure the successful execution of all workshop activities, coordinating efforts to complete contracts within budget and the established timeframe
• Ensure that the quality of all repair/fabrication work carried out conforms to the client’s specifications and to the Company’s quality system

Offer consistent feedback and reporting, both informal and formal, to Management regarding the performance and outcomes of the workshop

• Recruit & train workshop personnels

REQUIREMENTS:

• Solid working experience and proven track record as Workshop Manager in a Ship Yard, Port, Marine Engineering company or a Construction Company
• Previous sailing experience and qualification as Chief Engineer, sailing on oceangoing ships will be an added advantage
• Understanding of Engineering Regulations, norms and clads requirements
• Degree in Mechanical Engineering, Chief Engineer's licence or similar
• Excellent communication skills to liaise with Customers worldwide
• Experience in cost calculation and personnel management skill

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scopes & Responsibilities

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Lead and participate in technical transfer activities and cross-functional meetings
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints
• Effectively manage and work with project CQV team to ensure timely delivery of projects
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications
• Responsible for investigation of deviations, development of corrective and preventive actions and implementation of change controls in a timely manner
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo
• Benchmark equipment performance (e.g., reliability, productivity) and determine improvement plans
• Periodically review and/or improve equipment safety, maintenance strategy, spare parts, and other continuous improvement opportunities to enhance reliability
• Responsible for management and oversight of team of CQV engineers
• Develop the best team by coaching and mentoring engineers to develop their technical competency and leadership skills

Qualifications

• Doctorate degree in Engineering OR
• Master’s degree in Engineering and 4 years of directly related experience in a pharmaceutical manufacturing site OR
• Bachelor’s degree in Engineering and 8 years of directly related experience in a pharmaceutical manufacturing site
• Able to work independently with minimal of no supervision
• Experience in managing various stakeholders expectations related to process equipment in biopharmaceutical
• Good communications skills, both oral and written, including presentation skills
• Good interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Strong analytical skills and knowledge of industry trends to identify potential improvement opportunities. Ability to combine technical problem-solving skills with business acumen to determine best business solution
• Working knowledge of biopharmaceutical processes such as chromatography, buffer / media tanks, viral filtration, tangential flow filtration is preferred. Process knowledge on inoculation, bioreactors, harvest, single use technologies and critical utilities will also be considered
• Experience in validation processes such as generation/execution of Installation/Operation/Performance qualification documentation
• Knowledge in Automation systems and processes such as RD’s, Delta-V, BMS, ladder logic and PLC
• Demonstrated project management skills (schedule/cost development, facilitation, collaboration, basic project management, completion and follow-up) and application of concepts
• Problem solving skills requiring the application of scientific and engineering theory and calculations and creative skills in the development of hypotheses and approach
• Flexibility to work off-hours
• Knowledge of Total Productive Maintenance, Reliability Centered Maintenance concepts is an added advantage

Responsibilities:-

• Provide sales support which includes quotation preparation, processing of orders and overseeing the delivery process to customers
• Maintain close communication with customers
• Perform some administrative duties and multi-task other duties as assigned

Requirements:-

• Minimum Diploma in Engineering or equivalent
• Possess 2 years of experience & familiar with commercial documentation. Those who have worked in Marine or Oil & Gas industries will be an advantage
• Matured personality, dynamic, self-motivated and result-oriented
• Able to work independently with min supervision
• Positive attitude and good personality
• Able to work in tight schedule and under pressure
• Proficient in MS Office

We are looking for Electrical Engineers to expand our team.
Candidates with no experience are welcome to apply.

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills

• Transport clients and/or packages to and from destinations
• Arrive at destinations on schedule
• Fulfill administrative needs, like office pickups
• Interact with clients professionally at all times
• Ensure that the vehicle is always fueled and ready for use
• Arrange for vehicle repairs as needed
• Keep mileage records and repair records up-to-date

• Transport clients and/or packages to and from destinations
• Arrive at destinations on schedule
• Fulfill administrative needs, like office pickups
• Interact with clients professionally at all times
• Ensure that the vehicle is always fueled and ready for use
• Arrange for vehicle repairs as needed
• Keep mileage records and repair records up-to-date