• Position: Technician (Marine Engines/Generator Sets)
• Location: Tuas (company transport provided)
• Working hours: Monday to Friday (8.30am - 4.30pm)
• Salary (commensurate with experience): Up to $2,500 + OT Payable + AWS + 14 Days Annual Leave + Transport Allowance + Meal Allowance
• Duration: Permanent
• Industry: Equipment & parts distributor (MNC)

Main Responsibilities:

• In-charge of machine assembly Handling electrical panel wiring and machine cable routing
• Perform machine testing
• On-site installation & commissioning Marine engines, generator sets maintenance, servicing & troubleshooting
• Liaising with suppliers, contractors and customers on site installation job
• Maintain workshop cleanliness after daily job
• Any other ad-hoc duties assigned

Requirements:

• ITE or Diploma in Mechanical / Electrical / Mechatronics Engineering
• Trained and / or experienced in Marine Engines or Generator Sets
• Minimum 2 years of experience in Mechanical Engineering

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Associate Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Responsibilities:

• Responsible for maintaining the cleanliness of the office building
• Cleaning of toilets and common areas in the office eg: areas within workstations, pantry, shared walkways and restrooms
• Clearing of rubbish daily
• Replenishing of toilet paper rolls and soap in the restrooms and pantry, where necessary
• Report any defects to immediate supervisor if any

Requirements:

• Punctual and reliable
• Able to commence work immediately or within short notice

Other Information:

• Permanent Full Time
• Location - Tuas
• Company Transport provided at Boon Lay / Pioneer MRT station
• 5 working days, Monday to Friday (8.00am to 5.30pm)

Roles & Resposibilities

• Maintain neatness and general cleanliness of Office, lobby and office toilet.
• Wipe desks, partitions, tabletops, cabinets, glass doors and windows.
• Maintainence of pantry - displaying, organising and replenish pantry items.
• Prepare beverages for Management and customers.
• Clear waste paper baskets.
• Perform other relevant ad-hoc duties as and when required.

Work Hours & Location

• 5 days work
• Full-time, part-time, short hour available. Can be discussed.
• Subweld Engineering & Fabrication Pte Ltd, 19 Tuas Avenue 4 S639369.
• Next to bus stop, Near to Tuas Crescent MRT.
• Permanent role under Company payroll.

Position : Quantity Surveyor

Roles and Responsibilities

· Enrol tender process

· Prepare tender documents

· Prepare profit and loss & final account for project.

· Negotiate and award subcontractors

· Attend project meetings ,tender interviews and inspections, report regularly on progress and monitor schedule

· Evaluate and certify subcontract claim and contractual payment

· Analysis and preparation of cost plan & estimate for tender and job order

· Review and prepare agreements for award to subcontractors and suppliers

·Assist in preparing built-up tender pricing during tender stage

· Plan and schedules works with reference to contractual schedules

· Coordinate instructions & monitor with sales team, production, and clients for job order & design specification, acceptance of work, progress of work, problem solving, handover completed project with project documents, etc…

·Assist in preparation of project budget for management’s approval upon project award

·Ensure workplace is well-maintained, tidy & safe.

· Plan & implement effective, efficient production and safe practices.

· Attend site meetings

· Collaborate with team to propose design and materials based on budget and client requirement to obtain material dimension, design & specification from site .

Requirements

· MALAYSIAN only

· Candidate must possess at least Diploma / Degree in Quantity Surveyor/Building or equivalent experience in Building Construction firm.

· Minimum (Three) 3 years of relevant working experience in Quantity Surveying Works in building construction firm.

· Knowledge of structural will be beneficial.

· Familiar with Structural drawings to prepare for tender and job order.

· Highly motivated Responsible & team player with good interpersonal skill.

· Good Attitude Working

Kindly send your resume to [email protected]

Responsibilities

• Communicate, counsel and work with employees of various levels
• Organize and maintain personnel records
• Update internal databases (e.g. record medical, annual or maternity leave)
• Prepare HR documents, like employment contracts and new hire guides
• Revise company policies
• Liaise with external partners, like insurance vendors, and ensure legal compliance
• Create regular reports and presentations on HR metrics (e.g. turnover rates)
• Answer employees queries about HR-related issues
• Ensure payroll is supported and accurately reflects the renumeration of employees (e.g. leave of absence, medical leave, overtime and work schedules)
• Arrange travel accommodation and process expense claims
• Other duties as required
• Polytechnic diploma in electronics is an additional advantage .

Requirements

• Excellent inter-personal skills and able to communicate across all levels within the organisation
• Proven work experience as an HR Administrator, HR Administrative Assistant or relevant role
• Experience with HR & Payroll software
• Computer literacy (MS Office applications, in particular)
• Thorough knowledge of labour laws & practices
• Excellent organizational skills, with an ability to prioritize important projects
• Strong IT, phone, email and inter personal communication skills

Description

The Network Engineer is responsible for ensuring the integrity and resiliency of IT infrastructure to provide maximum performance for Rotary offices, project offices and its clients.

The Network Engineer will assist the IT Infrastructure Manager to maintain, support and optimized key functional areas such as network, data/telecommunications system and security. Required to participate in all infrastructure improvement activities.

Essential duties and responsibilities include the following:

• Responsible to provide L2/L3 network support for day-to-day operations.
• Responsible for designing, planning, implementing, administering & fine tuning of Rotary network systems, including LAN, Wireless LAN, WAN, internet and their associated software, hardware and communication links
• Conduct troubleshooting network/performance issues; analyse network traffic and provide capacity planning solutions.
• Maintain up-to-date documentation of Rotary’s network & security systems.
• Secure network systems by establishing, enforcing policies and monitoring access.
• Support and administration of firewall and VPN environments in line with IT Security policy.
• Ensure network solutions are compliant with security standards and guidelines and conform to industry and organizational best practice.
• Hands-on experience in administration & support of Cisco voice, modern web meeting platform (MS Teams, Zoom, etc) and video conference equipment.
• Participate in IT projects when required; not restricting to Infrastructure/Network activities.

Requirements

• Diploma/Degree in Computer or equivalent
• CCNA/CCNP certification will be an advantage
• 3-5 years of experience of relevant working experience in a large user environment
• Experience in network protocols such as BGP, OSPF, EIGRP, QOS
• Experience in VOIP protocols such as H323 and SIP is preferred
• Good communicator with strong problem-solving skills
• Ability to work in a team environment to engage and motivate team members
• Positive attitude and able to work well with culturally and geographically diverse teams

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

The Sales Executive reports to Sales Director and is responsible for the below:

• Connecting with existing clients closely to identify their upcoming needs and requirements.
• Preparing and delivering sales presentations to create sales opportunities.
• Relationship building with current and potential clients.
• Building strong Client rapport with regular visits
• Overseeing sales lifecycle from prospecting to closing of contract.
• Innovating and overseeing the sales process for the business to attract new clients.
• Collating market information to identify and explore upcoming opportunities
• Review opportunities and challenges in accordance with the Company’s direction.
• Communicate with multiple internal stakeholders clearly and accurately on client requirements.

To be successful, you will need the below:

• Good Communication skills
• Good Negotiation Skills
• Pleasant Disposition
• Outgoing and Extroverted
• Sales and Target driven
• Energetic

• Main Responsibilities:
• Assist in monitoring and managing the day-to-day operations of project
• Liaise with Mmaincontractors , surveyors and site supervisors/foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with owner/client/contractors/sub-contractors on the project related matters
• Carry out site inspection and ensure that the works were executed to the required quality standards

Requirements:

• Minimum 15 years of working experience in Building & Construction Industry including Renovation
• Independent with good communication skills
• Good communication skill
• Able to handover project independently

Responsibilities

• Co-develop an overall plan and objectives for the organisation’s marketing effort with the Head of Marketing
• Create and implement supporting content to ensure objectives are met
• Managing online presence for the company including identification of outreach opportunities, drafting of posts and content, alignment and clearance of content internally and with group Corp Comms. Key social channels include Linkedin, Facebook and YouTube
• Internal and external thought leadership liaison to support webinars
• Overall-in-charge for deployment of webinars, including pre-webinar engagement to drive attendance
• Management and implementation of budgets
• Consolidate and track all digital activities
• Provide updates on effectiveness and impact of activities
• Refine and revise plans to improve engagement and presence
• Write and proofread creative copy
• General administrative duties and reporting
• Presentation to Management, VIPs, internal and external forums when assigned
• Undertake other ad-hoc marketing-related tasks when assigned

Requirements

• Degree in Marketing/Mass Communications/Business or equivalent
• Minimum 3 years of relevant experience in similar role
• Possess exceptional writing and presentation skills
• Able to work with multiple line of businesses/business units and stakeholders within ST Engineering to drive the execution of abovementioned marketing initiatives
• Inquisitive, self-motivated, able to handle multiple opportunities and projects concurrently
• Able to work independently in a fast-paced environment, as well as collaboratively in a team
• Working location is in Ang Mo Kio
• Singaporeans only

Job Responsibilites

• Prepare District Cooling System (DCS) design for bid submissions and potential projects using CAD/BIM software such as AutoCAD/Revit to create 2D drawings such as equipment layouts, elevational and sectional drawings, schematic diagrams, etc. and 3D models of buildings which include mechanical and electrical aspects, etc.
• Develop technical write-ups/proposals for bid submissions and potential projects
• Work with Project Development team to generate tender specifications and drawings for tender issuance to contractors and suppliers/vendors
• Liaise with Procurement team to issue tender documents to contractors and suppliers/vendors and evaluate tender submissions
• Review existing district and retail cooling plants’ operations and provide improvement suggestions/plans with a data driven approach
• Liaise with government agencies and IHLs on collaboration/co-development matters on new technology development in the cooling domain
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor/the head of department from time to time

Job Requirements

• Degree in Mechanical Engineering or equivalent qualification
• Professional qualification(s) such as Singapore Certified Energy Manager (SCEM), Energy Efficiency Opportunities Assessor (EEO Assessor) and/or BCA-registered Energy Auditor will have an added advantage
• Minimum 5 years’ experience in air-conditioning system design, major retrofit works’ design involving chiller plant systems and/or energy audits of existing projects
• Familiarity with deployment and integration of renewable energy sources (e.g., solar PV) and energy efficient technologies (e.g., energy storage systems) will have an added advantage
• Proficient in using CAD/BIM software such as AutoCAD/Revit
• Attention to details
• Passion for problem solving
• Must be eligible to work in Singapore without sponsorship or restriction

The Cybersecurity Architect and Technical Consultant is a pre and post sales technical role in the Cybersecurity Services Business Unit. In this role, you will be responsible for scoping of prospective clients’ requirements and provisioning new client services into our suite of cybersecurity services, including but not limited to managed security services, VAPT, cybersecurity training, and other cybersecurity services served out from cutting edge new technologies. You will identify, evaluate, design, architect, and provide appropriate technical solutions both for the clients and internally for the business unit. As part of your responsibilities, you will identify and spearhead new technology initiatives and offerings, lead and manage the new initiatives to support the growth of the business, strategise and coordinate security efforts.

Externally, you will front existing customer as the trusted security consultant and advisor, and propose suitable services and solutions that may comprise existing offerings or other technologies to prospect and address the customer needs, and build a road map for the customer to on-board to our services.

You will work closely with the existing cybersecurity services consultants, pre-sales, service delivery managers and collaborate across different functional teams.

To be successful for this role, you should possess great interpersonal and communication skills, and technical expertise in the following domains:

• Network and Infrastructure Security
• Content (Application / Data) Security
• Endpoint Security
• Cloud Security

Responsibilities:

• Introduce a suite of cybersecurity services and solutions to partners and customers to achieve improved market share in the cyber security service market segment.
• Deliver customer workshops and presentations as required.
• Evangelise, engage in and/or support consultancy opportunities to influencing the customer's strategy favouring our portfolio of security services.
• Work with internal groups and third-party vendors from pre-sales and implementation through to production.
• Develop support and operation models for services and ensure support and operation costs and all internal or partner supply agreements are defined.
• Review existing capacity and plan for future capacity dimensioning; and develop Bill of Materials (BOM).
• Work closely with identified prospects and close specific sales opportunities.
• Analyse and qualify customer requirements and propose or develop a profitable and suitable solution to meet customer needs
• Function as a cybersecurity expert and provide a consistent solution/service experience to customers across different industries and internally within the division.
• Provide technical marketing and presentation of solution/service offerings.
• Content development of presentations to present value propositions.
• Develop the capability to transition customers from traditional legacy technologies to next generation on-premise and cloud services.
• Provide input, guidance and advice within the relevant specialist focus areas of technologies.
• Provide input as an expert advisor, and provide guidance and advice within the MSS SOC centre-of-excellence for technology and playbooks design.
• Maintain an up-to-date knowledge of present technological trends, processes and methodologies in the security marketplace so as to have a strong understanding and knowledge of competitor products and services
• Identify and spear head new efforts to support new business initiative such as SOC in the Cloud for regulated and SME market segment.
• Manage the development, implementation and operationalization of any new technological platform
• Lead the identification and implementation of security SaaS and expand portfolio offerings
• Opportunity to create global policy and guideline for new security initiatives
• Opportunity to ensure compliance for new security initiatives
• Setup, lead and manage technical reviews of portfolio technologies for the continual improvement of the security initiatives.

Requirements

• Attention to detail and ability to communicate well in a professional manner
• 5+ years of cybersecurity experience working with enterprise clients
• Ability to interpret the complexity of technical problems.
• Excellent interpersonal, co-ordination and problem solving skills.
• High level of initiative, accountability, professional diligence, attention to detail and ability to follow process.
• Ability to work un-supervised as well as being able to work as part of a team.
• Proactive, flexible attitude to work with an open mind to be exposed to different job scopes in varying degrees, and willingness to constantly review and improve skills and process.
• Professional certifications with demonstrable abilities will be considered favourably.

Responsibilities:

• Drive the Lorry and also Operate the Lorry Crane.
• Transport materials and equipment.
• Perform safe lifting operation at various site as required.
• Perform maintenance on vehicles such as cleaning interior and exterior & Report immediately if any defects.
• Understand and comply with safety requirements.

Requirements:

• Possess valid Class 4 / Class 5 Singapore Driving Experience.
• Possess WSQ certificate in Lorry Crane Operation or Equivalent.
• SOC (Oil/Petrochemical) (For Site Access).
• Minimum (2) years driving experience in Singapore is required.
• Minimum (1) year experience in operating Lorry Crane
• Good familiarity with Singapore roads and traffic pattern is required.
• Possess some minimal knowledge on Vehicle Maintenance and fault checking.

• Lead, manage, and report daily production and quality requirements. Assist operators and employees in troubleshooting as necessary. Coach and mentor team members on properly operating equipment, tooling, and quality requirements. A strong understanding of customer requirements will be developed so quality decisions can be made to prevent rejections and claims.
• Train and cross-train team members continuously to ensure skill levels are proficient and equalized within their respective positions. Meet expectation deadlines of training timelines.
• Perform safety training, audits, and daily coaching so our team is safe and accident-free.
• Manage a safe and efficient flow of all material produced so labor allocation and usage align with productivity goals, including evaluating right-sizing teams each shift. Address and correct productivity delays so they are not a repeat issue. Minimize gap and downtime and maximize uptime time.
• Lead daily housekeeping activities and allocate labor equally and appropriately to ensure continuing improvement towards a world-class appearance and maintain daily desired state.
• Assist as needed and coordinate the repair and maintenance of equipment as required.
• Ensure consistent timeliness of loading and unloading to avoid delays in inbound material removal and outbound shipments by the team. Included will be the correct shipment to our customers at all times by the training team to perform cross-checks and follow instructions on the material loaded.
• Set employee schedules, complete required production through the enterprise software, and review daily attendance punches for accuracy. Foresee and address overtime causes. Approve or assist in weekly approval of hours.
• Learn and lead improvement on required business management/production metrics as a requirement of the position. Additionally, train team members so they understand their responsibilities to the metrics. E., mill run rate, loading efficiencies, on-time delivery, etc. Employees should understand huddle board information and how to interpret it.
• Ensure customer specifications are being met on all produced, inbound, and outgoing products as a result of auditing, training, and coaching throughout each shift. This will include correct packaging, labeling, dimensional tolerances, defect-free products, etc
• Work as a leader, team member, resource, and/or coach and maintain required Lean and Visual Factory areas, including 5S, KanBan, daily task boards, housekeeping matrices, pull systems, shipping lanes, staging, etc. Continuous improvement project participation is required.

NLCS (Singapore) believes that each employee makes a significant contribution to our success and that contributions should not be limited by the assigned responsibilities.

Therefore, this position description is designed to outline primary duties, qualifications, and job scope, but not limit the employee, nor NLCS (Singapore), to only the work identified. It is the expectation of the school, that each employee will offer his/her services wherever and whenever necessary to ensure the success of our organisation.

Our School is committed to safeguarding and promoting the welfare of children and young people. The School expects all teaching staff, non‐teaching staff and volunteers to share and uphold this commitment.

NLCS (Singapore) is looking for an enthusiastic, highly qualified and committed Design & Engineering Teacher, with an outstanding track record of success. This is a unique opportunity to join a leading international school as it enters an exciting new phase of development. We have just started our third year of operation and already have over 1000 students enrolled.

Teaching, learning & assessment

• Demonstrate passion for the subject and strive to engender the same in students.
• Plan and deliver lessons that inspire, motivate and challenge students whilst ensuring that they are fully prepared for assessment tasks and are able to make the progress expected of them.
• Encourage students to take a scholarly approach to their studies, fostering a love of learning and promoting the pursuit of their academic interests beyond the confines of the curriculum.
• Create and maintain an engaging, exciting classroom environment that encourages discussion, debate and collaboration between students.
• Ensure that students have an excellent understanding of the content outlined in departmental curriculum plans, and are able to apply it effectively.
• Build stretch and challenge into teaching at every opportunity.
• Use a variety of formative and summative assessment techniques to measure students’ progress and achievement, and inform teaching.
• Provide individualised support to students who are underperforming.
• Make effective and timely use of feedback (written, verbal and otherwise) to support students in understanding their current achievement levels and what they can do to improve them.
• Maintain high expectations of the quality of students’ work, liaising with the Head of Department and other relevant staff to implement support strategies for those who are underperforming.
• Maintain high expectations of students’ engagement and work ethic, liaising with the Head of Department and other relevant staff to implement support strategies for those who are not meeting them.
• Maintain high expectations of students’ behaviour, collegiality, attendance and punctuality, in line with School policy, ensuring that relevant procedures are followed if these are not met.
• Ensure that teaching fosters the development of students’ knowledge and use of academic English, implementing appropriate support strategies for EAL students.
• Implement classroom strategies prescribed by the Individual Needs Department for students with an Individual Needs Plan (INP).
• Adopt a positive and developmental approach to academic monitoring activities such as lesson observations, work scrutiny, learning walks and student voice.
• Assess, record and report on the attainment, effort and conduct of students in line with School and departmental assessment policies and procedures.
• Assist in the development of departmental schemes of work and resources.
• Maintain accurate records of student attendance through the School’s attendance system.
• Fulfil a teaching commitment in line with the School policy and allocation.

Pastoral care

• Always consider students’ welfare and best interests, striving to promote both at all times.
• Support the strong pastoral emphasis within NLCS (Singapore) as a tutor, including teaching PSE. Manage a lively, enthusiastic, orderly and safe learning environment fulfilling the responsibilities of that position.
• Develop strong relationships with students, providing guidance and support in academic, pastoral and enrichment matters.
• Liaise with relevant colleagues with a focus on supporting student’s academic and personal development.
• Maintain regular and positive relationships with parents with a focus on supporting their child(ren)’s academic and personal development; the spirit of communication with home should be personal and individual.
• Liaise with and support the Pastoral Leadership team in all matters pertaining to pastoral well-being, responsibility and strategy.
• Working alongside the Senior School Management Team to contribute to academic, pastoral and enrichment activities that broaden students’ experiences and enhance the general life of the school.
• Follow the school’s policies and procedures with regard to pastoral provision.

Enrichment

• Support the School’s academic enrichment programme by contributing to the McCabe Lecture series, supporting student-led academic societies and delivering taught enrichment sessions.
• Attend School events and activities as directed by the Principal and voluntarily support events such as trips, Arts Festival events, sports fixtures (home and away) and musical performances by students, after school and at weekends.
• Deliver co-curricular activities in line with School policy.
• Support the House Competition by attending events and encouraging student participation.

General responsibilities

• Play a full part in the life of the School, supporting its distinctive aims and ethos, and be prepared to actively participate and contribute to the community activities that exist within the School.
• Maintain familiarity with the School’s Guiding Statements, striving to embody and promote them at all times.
• Work effectively as part of a subject and pastoral team.
• Maintain high levels of professionalism and conduct, acting as a positive role model for students.
• Carry out supervisory duties as per published duty rotas.
• Continue own professional development in relevant areas, including subject knowledge, pedagogy and others related to career and personal development goals.
• Attend assemblies, staff meetings and training sessions as per published calendars.
• Engage actively in the appraisal process.
• Contribute to the preparation and implementation of academic and pastoral development plans, policy and practice.
• Treat all students with dignity, building relationships rooted in mutual respect, and at all times observing proper boundaries appropriate to a teacher’s professional position.
• Abide by the expectations laid out in the Academic Staff Handbook and the Staff Code of Conduct.
• Maintain familiarity with, and follow, all school policies.

Safeguarding

• Abide by the School safeguarding policy and keep abreast of any changes

The NTU-WeBank Joint Research Centre On FinTech invites applications for the position of Senior Principal Research Scientist.

Key Responsibilities:

• Lead a research team to manage multiple concurrent research projects in collaboration with the Director and Principal Investigators (PIs), ensuring timely completion, adherence to budget constraints, and fulfilment of quality standards.
• Build and maintain strong relationships with local and international key stakeholders, including researchers, partners, and industry influencers.
• Provide strategic guidance and leadership to research teams, fostering a culture of collaboration, excellence, and accountability.
• Provide scientific expertise to achieve all project milestones, including deliverables, reports, and budget utilization.
• Oversee the financial aspects of research projects to ensure optimal expenditure within allocated budgets.
• Manage accounting and auditing matters, liaising with both internal and external auditors to ensure compliance with statutory and university standards.

Job Requirements

• A PhD degree in Computer Science and Engineering is preferred
• Extensive experience in senior management roles
• Strong understanding of cloud technologies, platforms, and architectures
• International experience in leading multiple big projects
• Excellent communication and interpersonal skills, with the ability to effectively engage with diverse stakeholders at all levels
• Strategic thinker with a results-oriented mindset, capable of translating vision into actionable plans and driving execution.

We regret that only shortlisted candidates will be notified.

The NTU-WeBank Joint Research Centre On FinTech invites applications for the position of Principal Research Scientist.

Key Responsibilities:

• Lead and manage individual and collective research projects, with a particular focus on distributed architecture, cloud computing, AGILE methodologies and big data.
• Employ profound industry insights and awareness of technological trends to contribute meaningfully to the project's R&D efforts, striving for pioneering outcomes.
• Initiate and oversee the development and presentation of prototypes, facilitating bench-top demonstrations to showcase potential applications and enhance research discoveries.
• Spearhead the planning and execution of networking events and initiatives aimed at strengthening industry partnerships and fostering entrepreneurship within the research community.

Job Requirements

• Minimum Bachelor’s degree in Computer Science and Engineering, or a related field. A master’s degree in a related field will be an advantage.
• Strong experience in project management in a Fintech environment, with deep understanding and application of AGILE methodologies.
• Background in technology or a related field, with a comprehensive understanding of global current and emerging trends.
• Excellent problem-solving skills.
• Strong leadership and communication skills, adept at cultivating collaborative environments.

We regret that only shortlisted candidates will be notified.

Salary: $2400-$2800+allowances+OT=>$3300

Industry: Engineering

Located at Gul Circle

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities

• Drive the Lorry and also Operate the Lorry Crane.
• Transport materials and equipment.
• Perform safe lifting operation at various site as required.
• Perform maintenance on vehicles such as cleaning interior and exterior & report immediately if any defects.
• Understand and comply with safety requirements.

Requirements

• Possess valid Class 4 / Class 5 Singapore Driving Experience.
• Possess WSQ certificate in Lorry Crane Operation or Equivalent.
• Minimum (2) years driving experience in Singapore is required.
• Minimum (1) year experience in operating Lorry Crane
• Good familiarity with Singapore roads and traffic pattern is required.
• Possess some minimal knowledge on Vehicle Maintenance and fault checking.
• 6 days work week

Job Duties and Responsibilities

1. Responsible for the safe operation of the lorry.
2. Liaise with the supervisor/manager concerned on the transportation operations.
3. Transport (i.e. collects and delivers) people / goods as directed.
4. Regularly clean and maintain the vehicle and checks / fills oil / water points / air pressure.
5. Maintain and record the vehicle logbook regularly.
6. Arrange the vehicles for regular servicing, repair & inspection whenever necessary.
7. Liable for full payment of traffic and vehicle emission pollution offences for non-compliance to government regulations.
8. Observe and practice all safe working procedures and PPE requirements of the plant.
9. To comply with the requirements and responsibilities as stated in the Risk Assessment (RA) with respect to your position in the company, which will be briefed to you.
10. Perform any other related duties as assigned by the immediate supervisor.

Minimum Requirements

1. Secondary Level.
2. Minimum 1 year of driving experience with class 3/4/5 license.
3. Must have a valid driving license
4. Able to speak English.
5. Able to start work early and reach on time

· Lead, manage, and mentor a team of workshop workers to achieve production goals and maintain quality standards.

· Plan and schedule tasks, ensuring optimal utilization of resources and adherence to production schedules.

· Coordinate with other departments, such as production planning and quality control, to ensure smooth workflow and timely completion of orders.

· Monitor the production process, troubleshoot issues, and implement corrective actions as needed to prevent delays and defects.

· Ensure compliance with safety protocols and regulations, maintaining a safe working environment for all team members.

· Train and onboard new recruits, ensuring they are familiar with workshop procedures, equipment operation, and safety protocols.

· Collaborate with procurement to manage inventory levels of raw materials, tools, and supplies required for production.

· Maintain accurate records of production activities, including quantities produced, downtime, and quality data.

· Implement and enforce company policies and procedures within the workshop.

· Identify opportunities for process improvements and efficiency enhancements.

· Report on production metrics, challenges, and opportunities to higher management.

Requirements:

· GCE “O” / “N” level

· At least 2 years of experience in a supervisory or leadership role.

· Proven experience in managing production schedules, optimizing resource allocation, and achieving production targets.

· Excellent leadership and interpersonal skills, with the ability to motivate and guide a diverse team.

· Problem-solving mindset with the ability to address production-related challenges effectively.

· Solid understanding of safety protocols and regulations in a production environment.

· Effective communication skills, both verbal and written.

· Strong organizational and time-management skills to prioritize tasks efficiently.

· Adaptability to changing production priorities and requirements.

· Attention to detail and commitment to maintaining high-quality production standards.

Position : Site Manager

Roles and Responsibilities

· Maintain inspection records of works, materials and all completed works

· Keeping track on variation and claims of contract and cost impact and feedback information to the PM

· Implement cost control measures to meet project budget

· Site co-ordination with all concerned parties and to resolve site issues

· Plan and schedule work sequences for construction operation, according to the Project Management Plan.

· Liaising with consultants on design analysis, design work, design check for approval and to resolve technical issues on site.

· Site inspection for civil work, which includes excavation, structural, casting and ensure that the work is executed as per the project specification and construction drawing/final approved drawing from authorities.

· Ensure worker carried out meet out quality standards and contractual requirements.

·To control materials, plan the overall schedule and implement specific planning measures

Requirements:

· Bachelor's degree in Civil Engineering or relevant field

· Minium 3 years of project environment experience

· Able to work independently and possess good problem-solving skill.

· Superior civil, structural, or architectural engineering working knowledge of plans, engineering drawings, specifications and schematics associated with the mechanical and plumbing trades

· Computer literacy. Significant experience with Excel, Word, and other computer based tools

· Excellent communication and organizational skills

• Overseeing the loading and offloading of goods.
• Inspecting and cleaning the vehicle.
• Safely transporting goods to and from distribution centers.
• Obeying the rules of the road and following company safety regulations.
• Finding the quickest and safest route to your destination.
• Completing travel logs.
• Following accident procedures.
• Reporting any accidents or delays.
• Maintaining a good relationship with customers.
• Experience with goods handling preferred.
• Experience with GPS navigation and mapping.
• Ability to drive long distances while maintaining focus.
• Self-motivated and able to work without supervision.
• Good communication skills

• Lead, manage, and report daily production and quality requirements. Assist operators and employees in troubleshooting as necessary. Coach and mentor team members on properly operating equipment, tooling, and quality requirements. A strong understanding of customer requirements will be developed so quality decisions can be made to prevent rejections and claims.
• Train and cross-train team members continuously to ensure skill levels are proficient and equalized within their respective positions. Meet expectation deadlines of training timelines.
• Perform safety training, audits, and daily coaching so our team is safe and accident-free.
• Manage a safe and efficient flow of all material produced so labor allocation and usage align with productivity goals, including evaluating right-sizing teams each shift. Address and correct productivity delays so they are not a repeat issue. Minimize gap and downtime and maximize uptime time.
• Lead daily housekeeping activities and allocate labor equally and appropriately to ensure continuing improvement towards a world-class appearance and maintain daily desired state.
• Assist as needed and coordinate the repair and maintenance of equipment as required.
• Ensure consistent timeliness of loading and unloading to avoid delays in inbound material removal and outbound shipments by the team. Included will be the correct shipment to our customers at all times by the training team to perform cross-checks and follow instructions on the material loaded.
• Set employee schedules, complete required production through the enterprise software, and review daily attendance punches for accuracy. Foresee and address overtime causes. Approve or assist in weekly approval of hours.
• Learn and lead improvement on required business management/production metrics as a requirement of the position. Additionally, train team members so they understand their responsibilities to the metrics. E., mill run rate, loading efficiencies, on-time delivery, etc. Employees should understand huddle board information and how to interpret it.
• Ensure customer specifications are being met on all produced, inbound, and outgoing products as a result of auditing, training, and coaching throughout each shift. This will include correct packaging, labeling, dimensional tolerances, defect-free products, etc
• Work as a leader, team member, resource, and/or coach and maintain required Lean and Visual Factory areas, including 5S, KanBan, daily task boards, housekeeping matrices, pull systems, shipping lanes, staging, etc. Continuous improvement project participation is required.

Job Responsibilities

• Participate in project development, front ends, feasibility studies of projects to ensure both its technical & commercial viability
• Conduct relevant researches to ascertain risks and potentials
• Drafts functional requirements and ensure that all client’s technical requirements are incorporated
• Prepare the central filing and project document control for the project
• Coordinate, review and clarify and final conclusion with the project team, of the functional requirements and design basis for project
• Execute project engineering functions in major and alliance projects
• Identify, discern and recognize possible technical hiccups and problems arise and see to its rectification
• Participate, support and facilitate material and cost estimation for project cost estimates and economics
• Prepare method statement, risk assessment and lifting plan
• To raise Purchase Requisition for materials, equipments and consumables
• Prepare daily, weekly and monthly reports
• Apply daily permit to work
• Carry out daily gas test for confine space entry
• To perform other duties as requested by PM/CM

Job Requirements

• Degree in Mechanical or Civil Engineering.
• Perfer 3 years of relevant working experience in Process Industry. Those without relevant experience is welcome to apply
• Willing to work 5.5 days work week and at the project site
• Able to develop and evaluate scheduling of a project, particularly in creating S-Curve
• Has good computer skills, experience and excellent knowledge in operating PC based applications, in particular MS Word, MS Excel, Microsoft Word, PowerPoint and Microsoft Project & P6
• Able to read and interpret mechanical drawing (P&ID, PEFS, ISO). Has experience in making a mechanical drawing using AUTOCAD or equivalent is preferable
• Able to work under demanding condition during project and as a team and individual independently
• Able to work in confine space environment