- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1) Experience in M&E QS scope of works and had participated in tender projects of more than $2 Mil

(2) Good Communication Skill and a Good Team Player

(3) At Least 3-4 years of experience in M&E field of works

(4) Resourceful and Outcome-based attitudes to explore any new arisings

(5) Experience in Project Tender Documentation and Submission requriement

(6) Require to attend Tender Site Show-arounds and Project Meetings with Project Director/Manager

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

Job Description & Requirements

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

~ Support HSSEQ department in ensuring ship operations are in compliance with internal company procedure

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

~ Support HSSEQ department in ensuring ship operations are in compliance with internal company procedure

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.
2. Required language(s): Preferably English and Mandarin spoken.
3. At least 6 Year(s) of working experience in the related field is required for this position.
4. Preferably specialist in Engineering - Electrical or equivalent.
5. Must have knowledge in Instruments and Electrical System for Process Control Environment
6. Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants.

2) Troubleshooting and problem solving for field Instruments.

3) Calibration and commissioning of field Instruments.

4) Electrical equipment troubleshooting and general maintenance for the process plant.

Key Responsibilities:

· Responsible for managing Accounts Payable (AP), Accounts Receivable (AR), and General Ledger (GL) functions

· Prepare AR invoices, monthly debit and credit notes .

· Generate reports for management related to payable suppliers and prepare monthly bank reconciliation and financial statements

· Check and classify account codes in receipts and payment vouchers and prepare journal entries for non-cash items using Excel

· Prepare quarterly GST submissions, monthly cash flow statements, and monitor monthly stock balance and prepare stock ledgers

· Implement and execute departmental and organisational controls and procedures

· Instruct and process all marine industry sub-contract work

· Responsible in payroll processing.

· Perform and Handle tax clearance.

· Handle work pass application, renewal and cancellation and work pass related matters including tax clearance.

· Maintain and Update Employees Files and Record in Hr system.

· Handle and Resolve queries on payroll related matter.

· Communicate with shipyard and MOM to follow and to implement new measures on foreign workers.

· Handling comprehensive work permit application, Worker Grievances and workers welfare.

Required Skills and Qualifications:

· Minimum Diploma in Accounting or Finance

· At least 4 years of experience in a similar role

· Experience in Marine, Construction or Process Industry

· Strong knowledge of accounting principles and standards

· Proficiency in Microsoft Excel and other accounting software

· Excellent attention to detail, organizational, and communication skills.

eqponsibilities :

• Maintenance of invoices i.e. scanning, updating and posting of invoices in system
• Processing of payments to vendors and perform bank reconciliation
• Liaison with vendors for missing invoices/payment status
• Attach daily bank advice in accounting system
• To perform ad-hoc duties as per assigned

Requirements

• O Levels/ LCCI / Certificate / Diploma in Accountancy or equivalent
• Computer skills and Microsoft Office
• Minimum 1 year of related experience

• To conduct / plan safety inspection to verify safety provision and provide recommendations for improvements conforming to worksite rules and regulations to comply with statutory requirements
• To investigate any accident, dangerous occurrence or occupational disease that occurred within the workplace and provide recommendations for countermeasures to prevent recurrence
• Implementation and revision of Risk Management
• Liaise with Ministry of Manpower on safety issues and safety statutory requirements
• Establish, update, maintain, and implement the Safety & Health Management System
• To conduct relevant safety training needs e.g. Safety induction, Permit to Work, Safe Work Procedures etc.
• Identify training needs for safety personnel and recommend the required training to ensure competency of the workforce.
• To conduct Safety Committee Meeting to address safety issues and ensure a safe working environment for all personnel
• Ensure in-house rules and regulations are implemented and enforced diligently at the worksite.
• Coordinate safety promotional activities to develop and maintain safety awareness among all personnel
• Evaluate, select and control sub-contractors to ensure awareness of their safety obligations on site
• Review, assess and maintain the Safety Data Sheets
• Ensure storage, movement, use, and disposal of hazardous substances and chemicals are well managed
• Ensure the register of hazardous substances is up to date
• Continuously review the emergency procedure and update.
• Manage and control situations arising during an emergency
• Plan and implement occupational health programs to protect workers from health hazards such as noise, dust, toxic gases, vapors and radiation
• Coordinate safety audit and ensure the closure of all findings
• Coordinate the preparation and submission of all required safety reports e.g. Integrated Management System (IMS) Quarterly report, Risk Assessment review
• Updates on codes of practice & safety literature and circulates information to each level of employees
• Monitor the Safety Performance of the project as set by the company policy and objectives e.g. Accident Frequency Rate (AFR), Accident Severity Rate (ASR) etc
• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999
• Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)Ensure safety practices and housekeeping is to maintained to the highest standard

Requirements:-

• Must possess registered MOM WSH Officer license
• Min 3 years’ WSH Officer experience in Building projects

Supervise Service Technician

Troubleshooting all technicial repair if service technician encounter issue

Handle customer enquiry

Planning schedule for appointment

Must posses Class 3 driving licence to attend client repair

Must fleunt in English and posses high level customer service skill

Must have knowledge in air con / fridge / washer / home appliances repair

Responsibilities:

• To review, conduct incident / accident investigation and provide recommendations for countermeasures and to prevent recurrence of accident
• To coordinate of daily toolbox meeting and upkeep the records
• To conduct daily safety inspection and other type of safety inspection as required at work site
• To coordinate the immediate rectification of unsafe conditions and correct any safety malpractices on site
• Monitor and oversee the enforcement of In-house Rule and Regulation and ensure safe work practices on site
• Coordinate and conduct the safety induction course to all site staffs
• Submission of Quarterly EHS performance & 6-monthly review of Risk Assessment
• Ensure and to carry out duties in accordance to WSH Act & Integrated Management System
• Assist WSHO to establish, update, maintain, and implement the Safety and Health Management System
• To assist WSHO for all safety promotional activities, safety audits, safety meetings and execution of safety programmes

Requirements:

• Advanced Certificate in Workplace Safety and Health or equivalent
• Minimum 2 years of relevant working experience

• Operate precision CNC turning/milling machine
• Perform CAD/CAM programming
• Interpret Engineering Drawings and Feature of Control Symbols
• Simple setting up of work piece and tooling set up
• Check and maintain machinery daily to ensure functionality
• Able to handle 8" to 12" chuck CNC Turn/Mill Machine, Fanuc control

Requirement

• Proficient in Quality Consciousness with the ability to meet productivity goals
• Must have good interpersonal communication skills and a positive team attitude
• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre

Responsibilities:

• CAD Modeling: Work with detailed 3D models and assemblies using industry-standard CAD software to design robotic components and systems.
• Mechanical Design: Collaborate with senior engineers to develop mechanical designs that meet project requirements, including structural integrity, functionality, and manufacturability.
• Prototyping: Assist in the prototyping and testing of mechanical components and systems to evaluate their performance and make necessary improvements.
• Documentation: Prepare technical documentation, including design specifications, drawings, and reports, to communicate design concepts and results effectively.
• Collaboration: Work closely with cross-functional teams, including colleagues on other engineering teams, project managers, and the production team to ensure seamless integration of mechanical systems within robotic platforms.
• Problem Solving: Identify and troubleshoot mechanical design issues, providing creative and practical solutions to engineering challenges.

Requirements:

• Polytechnic/University undergraduates currently pursuing diploma/degree in Mechatronics, Robotics, Mechanical, Electrical, Electronics, Computer Engineering or a related field.
• Strong interest in robotics and automation technologies.
• Strong analytical and problem-solving skills.
• Strong communication skills in English (both oral and written)
• Proficiency in CAD software, such as SolidWorks or AutoCAD
• Strong understanding of mechanical design principles and fundamentals.
• Eagerness to learn and apply new engineering concepts and technologies.
• Excellent communication and teamwork skills.
• Attention to detail and a commitment to delivering high-quality work.
• Preferred: Knowledge of materials science and manufacturing processes.
• Preferred: Experience with 3D printing and rapid prototyping.

Report to the Project Manager

· Overall in charge of site coordination.

· Lead a team of operation staff in daily operations.

· Manage and oversee the day-to-day construction activities of the project.

· Monitor and control the general workers' deployment on-site.

· Maintain and manage site storage areas for building materials and equipment.

· Maintain site access throughout the construction period.

· Planning ahead to prevent the problem on-site before it occurs, planning the delivery and storage of equipment and materials.

· Ensure progress of work is within budget and timelines as well as quality and safety objectives.

· Control and monitor work progress and resources.

· Monitor and control material wastage.

· In-depth understanding of project specifications, technical details, and construction drawings.

· Carry out work scheduling, material requisition planning, project coordination, and documentation.

· Ensure timely completion and good quality of works & carried out safely and WSHE regulations are complied with.

· Provide proper guidance and training to junior staff.

· Other ad-hoc duties as assigned by the Immediate Supervisor/ Management.

Job role

· The Construction Manager should be capable of managing the site, executing construction operations, timely completion of project within allowable costing or budget

· The candidate also assesses compliance with the relevant regulatory and legislative requirements.

· The candidate is meticulous and highly detail-orientated, possesses good communication, problem-solving, and interpersonal skills, and works on-site.

Job description

· In-charge of project implementation, efficient use of resources till successful projects completion within contractual schedule and budgeted cost,

· Able in planning and creating schedules and project timelines

· Track schedule, control subcontractors and suppliers to meet schedule, safety and quality objectives

· Ensuring all works carried out to meet the company’s quality standards and contractual requirements

· Co-ordinate with clients, sub-contractors and consultants on the projects matters

· Ensure engineers, supervisors & foremen meet clients & regulatory requirements, as well as environmental, safety and health practices, are carried out at all times

· Planning of daily activity by coordinating responsibilities of site engineers/site supervisors and sub-contractors

· Other ad-hoc duties by Management assigned from time to time

Job requirements

· Recognized Degree in Civil and/or Structural Engineering) or equivalent

· Minimum 3-4 years of practical working experience

· Computer literate such as project management, excel, power points, words, etc,

· Certificate in Construction Safety Course for Project Managers

· Excellent leadership, time management, analytical, communication, presentation, and interpersonal skills

· Organised, meticulous with positive work attitude

· Good team player with strong leadership skills

· Skilled in managing and motivating diverse, multi-functional, multi-cultural project teams.

Roles & Responsibilities

• Responsible Operate Conventional Machine / Milling / Grinding Machine.
• Perform minor troubleshooting, repairs and replace on equipment spare part.
• Perform housekeeping and cleaning of machine and work area to ensure neat and tidy working environment.
• Perform On-site service.
• Perform other ad hoc duties assigned based on business needs.

Job Requirements

• Driving License.
• Responsible, self-motivated and good interpersonal skill.
• Ability to work independently as well as in a team.
• Positive attitude towards learning.
• Basic knowledge of hardware analog and digital circuit.
• Strong technical skills with the ability to diagnose and fix hardware issues.
• Able to work on weekend and overtime if needed.
• At least 2 years of working experience.
• Candidates without experience are welcome to apply as training will be provided.
• Preferably able to start immediately within short notice.

Minimum Qualification Level: GCE O-Level, Nitec, NTC Grade 2 or equivalent

Field of Study: Engineering Trades n.e.c. (eg pipe & steel fabrication, welding, diesel engine mechanics)

Job Responsibilities

• Project coordination and Supervision of ACMV site progress
• Attend site meetings
• Coordination with sub-contractors
• Reporting Project Progress
• any other duties assigned

Job Requirements

• Fresh Graduate Welcome
• Degree in Engineering / Materials
• Working days per week: 6
• Working hours : 0830 - 1730hrs

Summary:

At Energy Supplies & Engineering (S) Pte Ltd, we are leaders in delivering specialized HVAC solutions in Singapore, focusing on dehumidification systems, Dedicated Outdoor Air Systems (DOAS), and other custom-engineered products. Our clients span various industries, including data centers, manufacturing, and commercial facilities, and we are dedicated to providing reliable, high-quality solutions.

As we continue to grow, we are looking for a dedicated Sales & Application Engineer to join our team. In this role, you’ll be pivotal in connecting customers with technical solutions, supporting the sales team, and managing customer relationships to ensure our clients receive top-notch service and solutions.

Key Responsibilities:

Technical Sales Support - Assist the sales team by understanding customer needs, creating proposals, and presenting technical solutions.

Application Engineering - Recommend and design HVAC solutions based on client specifications, ensuring technical feasibility and cost-effectiveness.

Customer Engagement - Build strong relationships with both existing and potential clients, listening to their needs and maintaining high levels of customer satisfaction.

Project Coordination - Work with internal teams and suppliers to ensure projects are executed smoothly and solutions meet customer expectations.

Documentation & Reporting: Keep accurate records, including proposals, technical specifications, project timelines, and sales reports.

Market Insights: Stay informed on industry trends and competitor products to offer innovative solutions that keep us competitive.

Participate in post-project reviews to evaluate project performance, gather feedback, and identify opportunities for process improvement and innovation.

Conduct training sessions for internal teams, contractors, and clients on product application, installation best practices, and maintenance procedures to enhance project outcomes and client satisfaction.

Any other ad hoc tasks assigned by supervisor.

Qualifications:

Diploma in Mechanical or Electrical Engineering and above

Minimum of 1-2 years in sales or application engineering within the HVAC industry (fresh graduates with relevant internships are also welcome to apply)

Relevant certifications in HVAC, refrigeration, and electrical systems are a plus.

Able to work independently, proactive, and focused on meeting and exceeding sales targets.

Clear verbal and written communication skills, with the ability to explain technical details to customers.

Additional Requirements:

Ability to work flexible hours and respond to emergencies as needed.

Physical capability to perform inspections and repairs in various environments.

Ability to multitask and prioritize tasks effectively.

Attention to detail and problem-solving skills.​​​​​​​​​​​​​​

Benefits:

Competitive salary with performance-based bonuses

Opportunities for professional growth and training

Collaborative and supportive work culture

Health and wellness benefits

Working Conditions:

Immediate Full-time position, typically Monday to Friday, with standard office hours

How to Apply:

If you’re passion for HVAC and a customer-focused approach, we’d love to hear from you!

Please apply via [email protected] with your updated resume and a cover letter detailing your interest and relevant experience.

Job Responsibilities

1. Handling general admin paperworks & matters.

2. Preparing monthly reports.

3. Perform other duties as assigned.

Job Requirements

Min 2 years working experience

N level or equivalent

Other Requirements:

Working days per week: 5.5

Working Hours:

Mon-Fri : 0830hrs-1730hrs

Sat : 0830hrs-1230hrs