Responsibilities

Excellent execution on assembly process for 1st NPI success and smooth transfer process from NPI to HVM

• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with multi-functional team from NPI to LVM/HVM process transfer. On-time execution of NPI Customer samples and Engineering Samples build for new products and packages

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and apply key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Qualification

• Bachelor or Masters in Electrical Engineering, Materials Science, Chemical Engineering, or related field. A PhD is a plus.
• 1-3 or more years of experience in Semiconductor Manufacturing, Process & Equipment Engineering and/or New Product Introduction.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Be able to comfortably work across organizational boundaries and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Organized, meticulous, and strong focus on results.
• Excellent analytical skills
• Excellent communication and written skills

A Research Fellow position in enzyme engineering/synthetic biology for CNegSAF project is available at the Campus for Research Excellence and Technological Enterprise (CREATE) in Singapore.

CNegSAF PROJECT

CNegSAF Project: Carbon Negative production of advanced Sustainable Aviation Fuels using twin synthetic bacterial consortia

Hosted by CNRS@CREATE, the program ‘Carbon Negative production of advanced Sustainable Aviation Fuels using twin synthetic bacterial consortia Project’ (CNegSAF) is an international collaboration between world leading institutions in France and Singapore including CNRS, Toulouse Biotechnology Institute (TBI), National University of Singapore, A*Star (SIFBI), and Nanyang Technological University. CNegSAF aims to demonstrate the feasibility of using a synthetic bacterial consortium to convert green hydrogen and concentrated waste CO2 (released by chemicals companies) into sustainable aviation biofuels. This innovative research program has the potential to significantly contribute to Singapore’s and the world net-zero emissions target while supplying sustainable aviation fuels to the aviation industry.

Read more about the CNegSAF project here.

DESCRIPTION

To join this team, we are looking for a candidate who will be in charge of enzyme engineering activities using state-of-the-art evolutionary engineering and computational enzyme design techniques. The candidate will be involved in the development of screening protocols, construction and screening of enzyme libraries, designed by in silico molecular modelling. These enzymes will be further used for the creation of novel metabolic pathways for terpenoid production in engineered bacterial strains.
The perspective researcher will work in a multidisciplinary environment with access to high-throughput screening equipments (both in Singapore and Toulouse, France) and have frequent and strong interactions with other scientists involved in metabolic engineering, pathway engineering and computational enzyme design.

EXPERIENCE & QUALIFICATIONS

• PhD in Molecular Biology, Biochemistry, Biochemical engineering or related field
• Experience with enzyme engineering and enzyme library construction
• Expertise with HT screening, assay design and development and trouble shooting
• Experience in structural biology and molecular modelling/computational enzyme design would be a plus
• Preferred experience with protein production, purification, characterization and crystallization knowledge
• Preferred experience with metabolic engineering/synthetic biology background
• Strong communication with structured reporting and organizational skills
• enjoy working in a team-oriented environment
• Good English skills are required.

FURTHER INFORMATION & CONTACT

Salary range: SGD 6,900 – SGD 10,000 (depending on suitability and experience)

The position is available starting February 2025 and for a duration of up to three years. The position will be mainly based in Singapore with possible visiting stays in Toulouse, France.

Applicants should send as soon as possible CV, summary of previous research and contact addresses of two references to:
Isabelle ANDRÉ (TBI, Toulouse, France): [email protected]
Xixian CHEN (A*-SIFBI, Singapore) : [email protected]
Bo XUE (SynCTI-NUS, Singapore): [email protected]
Thomas Lautier (TBI, Toulouse, France): [email protected]

Advance Packaging Integration – Senior Engineer (Package Development Engineering, Silicon Technology Package Integration) (PDE STPI)

We are looking for a Package Silicon Integrator in Package Development Engineering (PDE) Senior Engineer who will lead and drive Micron’s Packaging Technology Development Projects meeting Time to Market (TTM) business unit needs as well as meeting performance targets for Thermal, Electrical, Mechanical, Reliability and Cost. You will collaborate with Micron’s multi-functional team that include Product Development, Wafer level process, Assembly, Test, Manufacturing and Global Quality. Together, we will be responsible for the designing Test Vehicle Development Strategy, and execution to definition, development, and delivery of state-of-the-art product/packages that will shape the future of advanced computing, automotive and mobile products.

Responsibilities will include, but are not limited to:

• Drive package technology integration activities for the silicon test chip development projects and support NPIs to keep roadmap items on track to meet “go to market” timelines.
• Coordinate core team in Development and NPI space of advanced 2.5D/3D packages and standard packaging to drive material and BOM choices, body sizes, manufacturability, and package constructions to achieve acceptable Design for Manufacturing (DFM) and Design for Reliability (DFR) requirements.
• Evaluate wafer design inclusive of bondpad, scribe, pillars/bump and polyimide, and drive materials and BOM choices such as die thickness and mold compound to meet chip package interaction requirements.
• Drive materials characterization from both package and die components to understand chip package interaction mechanism using TMA, DMA, nanoindentation, and packaging mechanical and thermal stress stimulus.
• Drive novel solutions with silicon design and product teams to recommend the optimum package solutions to meet electrical, mechanical (1st, 2nd, and 3rd level interconnect), thermal, reliability, cost, and other system level requirements.
• Interface closely with multi-functional team that include Product Development, Wafer Level Process, Assembly, Test, Manufacturing and Global Quality and manage the product/package to mass production.

Requirements:

• Bachelor/Masters of Science in physics, materials, mechanical, chemical, or electrical engineering. MS or PhD preferred
• 5+ years of relevant experience in semiconductor manufacturing or a related field, with hands-on experience in semiconductor packaging or Frontend processes, specifically in technology on
• Appreciation for Structured Problem Solving
• Ability to interpret die-, package-, and system-level design and simulation (thermal/mechanical/electrical) methodologies and results
• Knowledge in Chip Package Interaction (CPI)
• Experience and working knowledge with 2.5D/3D heterogeneous integration technologies such as WLFO, SoIC, CoWoS, WoW, InFO, and other chiplet/SiP architectures is a plus
• Experience with wafer bumping, package assembly, substrate technology, BOM selection, testing and product development lifecycle
• Excellent communication skills with the ability to convey complex technical concepts to both technical and non-technical partners
• Demonstrated leadership experience in guiding multi-functional teams and driving technical excellence

Keen on the role? Apply now!

Advance Packaging Integration – Senior Engineer (Package Development Engineering, Silicon Technology Package Integration) (PDE STPI)

We are looking for a Package Silicon Integrator in Package Development Engineering (PDE) Senior Engineer who will lead and drive Micron’s Packaging Technology Development Projects meeting Time to Market (TTM) business unit needs as well as meeting performance targets for Thermal, Electrical, Mechanical, Reliability and Cost. You will collaborate with Micron’s multi-functional team that include Product Development, Wafer level process, Assembly, Test, Manufacturing and Global Quality. Together, we will be responsible for the designing Test Vehicle Development Strategy, and execution to definition, development, and delivery of state-of-the-art product/packages that will shape the future of advanced computing, automotive and mobile products.

Responsibilities will include, but are not limited to:

• Drive package technology integration activities for the silicon test chip development projects and support NPIs to keep roadmap items on track to meet “go to market” timelines.
• Coordinate core team in Development and NPI space of advanced 2.5D/3D packages and standard packaging to drive material and BOM choices, body sizes, manufacturability, and package constructions to achieve acceptable Design for Manufacturing (DFM) and Design for Reliability (DFR) requirements.
• Evaluate wafer design inclusive of bondpad, scribe, pillars/bump and polyimide, and drive materials and BOM choices such as die thickness and mold compound to meet chip package interaction requirements.
• Drive materials characterization from both package and die components to understand chip package interaction mechanism using TMA, DMA, nanoindentation, and packaging mechanical and thermal stress stimulus.
• Drive novel solutions with silicon design and product teams to recommend the optimum package solutions to meet electrical, mechanical (1st, 2nd, and 3rd level interconnect), thermal, reliability, cost, and other system level requirements.
• Interface closely with multi-functional team that include Product Development, Wafer Level Process, Assembly, Test, Manufacturing and Global Quality and manage the product/package to mass production.

Requirements:

• Bachelor/Masters of Science in physics, materials, mechanical, chemical, or electrical engineering. MS or PhD preferred
• 5+ years of relevant experience in semiconductor manufacturing or a related field, with hands-on experience in semiconductor packaging or Frontend processes, specifically in technology on
• Appreciation for Structured Problem Solving
• Ability to interpret die-, package-, and system-level design and simulation (thermal/mechanical/electrical) methodologies and results
• Knowledge in Chip Package Interaction (CPI)
• Experience and working knowledge with 2.5D/3D heterogeneous integration technologies such as WLFO, SoIC, CoWoS, WoW, InFO, and other chiplet/SiP architectures is a plus
• Experience with wafer bumping, package assembly, substrate technology, BOM selection, testing and product development lifecycle
• Excellent communication skills with the ability to convey complex technical concepts to both technical and non-technical partners
• Demonstrated leadership experience in guiding multi-functional teams and driving technical excellence

Keen on the role? Apply now!

Job Description

• To assist in ongoing Projects and maintenance of equipment.
• Carry out all warranty, preventive maintenance, & breakdown service jobs assigned
• Testing and Commission of equipment.
• Pre-delivery checks and assembly of equipment.
• Co-ordinate with customers for all repairs, quotations for repair and spare parts.
• Meeting organization goal to turnaround within 4 - 10 hours on site during office hours on weekdays.
• Able to work independently in a Hospital environment and as and when required, to perform duty after office hours.
• Familiarize with relevant local regulatory standard such as Workplace Safety and Health Act (WSH Act) and ensure compliance.
• Familiarize with the relevant GDPMD / ISO procedure & always operate within the guideline.
• Prepare job sheets, seek customers approval/confirmation, co-ordinate with SOM to invoice with correct spare parts.
• Ensure timely job sheet closure to speed up billing processes to reduce AR & Inventory holding.
• Familiarize with all risk management processes and ensure compliance at site.
• Responsible to do it right first time and be aligned to aim for zero complaints.
• Attend all training or re-training identified and contributes to continual improvement by giving constructive feedback to manufacturer.
• Any other duties and responsibilities as and when assigned by immediate superior or management.

Job Requirements

• Min. Degree in Mechanical / Electrical / Biomedical Engineering
• Min. 1 year of working experience, preferably in hospital environment or engineering consultancy firm.
• Strong engineering knowledge.
• Positive attitude with good communication and interpersonal skill.
• Good analytical and problem-solving skills.
• Customer focus & excellent execution.
• Able to travel outstation or overseas when required.
• Fluent in English.

Attributes

• Showing commitment to work and consistently producing the desired outcomes.
• Working positively, responsibly and sharing a sense of accountability.
• Applying the required skills and knowledge to the tasks that you are asked to do.
• Delivering expected outcomes by using available resources effectively.
• Demonstrating clear plans and priority to work assignments.
• Improving self by showing eagerness to learn, gain new skills and knowledge.
• Embrace the idsMED values of Loyalty, Integrity, Balance, Care, Agility, Reliability and Entrepreneurship.
• Show a genuine desire to care for others, with a Happy, Engaging, Approachable, Responsible and Trustworthy personality.

To assist Engineer in the drawings/documentation development and preparation.

To carry out drafting of building structures drawings.

Create visual guidelines for construction purposes.

Draft technical details.

Specify dimensions, materials, and procedures.

Edit technical draughts based on the recommendations of project engineers and architects.

To assist Engineer in the drawings/documentation development and preparation.

To carry out drafting of building structures drawings.

Create visual guidelines for construction purposes.

Draft technical details.

Specify dimensions, materials, and procedures.

Edit technical draughts based on the recommendations of project engineers and architects.

To assist Engineer in the drawings/documentation development and preparation.

To carry out drafting of building structures drawings.

Create visual guidelines for construction purposes.

Draft technical details.

Specify dimensions, materials, and procedures.

Edit technical draughts based on the recommendations of project engineers and architects.

Job Description:

• Responsible for product quality assurance.
• Completes all administrative activities associated with quality inspection.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Downloads quality information from quality system to be used for Quality reports.
• Plans and directs activities concerned with the establishment and/or continuance of process related requirements and other quality programs.
• Prepares quality documentation or equivalent.
• Prepares Statistical Process Control Charts where required.
• Responsible for authorizing the released of final products to customer.
• Supervises inspectors or technicians on the inspection plan.
• Directs inspectors or technicians engaged in measuring, inspecting and/or testing products or parts and tabulating data.
• concerning materials, product or process quality and reliability.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering
• to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets
• through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Job Requirements :

• Diploma / ITC / NTC in Mechatronics/ Electrical & Electronics engineering or related discipline, preferably with 2 years in manufacturing environment.
• Proficiency in written and communication skills in English.
• Practical computer skills and knowledge with hands-on ability.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Able to use microscope for inspection and verification.

To assist Engineer in the drawings/documentation development and preparation.

To carry out drafting of building structures drawings.

Create visual guidelines for construction purposes.

Draft technical details.

Specify dimensions, materials, and procedures.

Edit technical draughts based on the recommendations of project engineers and architects.

Roles & Responsibilities

Part time admin and acccounts assistant

or full time admin and acccounts assistant

Occupation

Administrative Accounts Assistant

Job Description & Requirements

What you will be doing on a daily basis

• project submission
• Follow-ups and billing to clients
• Email Correspondence
• Data entry
• Accounts entry

Job requirements

• strong communication skills
• able to write and converse in English
• Able to use accounting system

Working hours ( please take note before applying for the job )

5 working day 4 to 6 hours daily (part time)

5 working day 8 hours daily (full time)

Working location

near taisin MRT

Please note this is a direct hire ( do expect to start work within 1 to 2weeks )

please submit a resume via the portal here

things to include

• Name
• address
• contact details
• if you require any work passes to work in Singapore
• your work history

Hi,

Looking for Aircon Specialist and preberably with technical skills for the jobs.

We are looking for trainees as well who are willing to learn hands on in mechanical engineering.

from age 18-40

For Repairing of Airconditioning and mechanical ventilation fan

- Knowledge of how to repair or even with Chiller knowledge

For installation of Airconditioning and mechanical ventilation fan

- Knowledge of how to install ACMV equipments

Management skills to manage supervisors and technicians on their technical knowledge and also to plan their schdules and work plans.

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

• Invoices should be prepared and fact-checked before being sent to clients.
• General ledger and sales journal upkeep and updating.
• To fulfil vendor statements, obtain permission.
• Checks should be made, filled out, and distributed.
• Prepare and secure PO approval.
• Scan, catalogue, and record accounting papers.
• Documenting and organising monetary transactions.
• Paying bills and processing payments.
• Taking notes at a meeting.
• Financial transactions processing.
• Excellent communication abilities.
• Multitasking skills.
• Helping the larger financial staff and accountants.

1. To coordinate and manage building construction M&E site works.

2. Ensure all M&E works are performed on time and in compliance with all necessary standards, code of practice and safety regulations.

3. Responsible for the supervision and coordination of M&E works at construction site.

4. Monitor progress, quality of workmanship and compliance.

5. To coordinate M&E wall/floor penetration drawings for approval.

Job Description

The job involves the supervision of MRT projects Cross Island Line.

For those with less than the specified 3 years of relevant experience, training will be provided.

Job Requriements

RTO shall have diploma in the civil/structural discipline or National Certificate in Construction Supervision (NCCS) or equivalent and accredited by and registered with IES/ACES with minimum 3 years relevant experience in supervision deep excavation/ basement works.

- MRT experience will be an advantage.

- To assist RE & SRE to monitor all site activities

- Willing to work on night & rotation shifts

Responsibilties for Quantity Surveyor:-

- able to take off quantity of construction materials from construction drawings.

- familiar with the preparation of construction materials take-off using construction industry form and

using computer software like Autocad and microsoft excel spreadsheet.

- candidate will be station permanently on site to assist the Project Manger/Project Enginner in work.

- progress claims and prepare the documentations for submission to the main contractor.

- must have at least 5 years working as a quantity surveyor.

- must be committed and able to work under pressure and deliver on time.

- must have good conduct and able to communicate and work with fellow employees, clients/sub

contractor.

Job Description

The job involves the supervision of MRT projects Cross Island Line

Job Requirements

RE shall have minimum 4 years of relevant experience as a civil engineer, of which minimum 2 years in supervision of deep excavation/basement works..

- Registered as RE Cert accredited by the Institute of Engineers Singapore (IES)/Association of Consulting Engineers Singapore (ACES).

- MRT experience will be an advantage.

Introduction:

Hostmost Group of Companies is a leading Marine Radio Communications and Navigation system service provider. Established in 1989, we have expanded our operations globally, providing reliable services to clients across different regions. With 14 wholly owned offices and depots spanning Asia to North America, we pride ourselves on maintaining a strong global service network. At Hostmost Group, we believe in continuous improvement and invest in staff training to stay ahead of industry trends and requirements. Our group is currently expanding and there will be several vacancies available.

Job Descriptions:

· Manage sales enquires and process quotations.

· Process sales or service orders.

· Process draft billings.

· Meet up with customers.

· Any ad hoc duties as assigned

Requirement:

· Diploma & above.

· Minimum 2 years of sales or admin experience. Commensurate with experience.

· Knowledge of SAP will be an advantage.

· Only Locals (Singaporean or PRs) need to apply.

Location:

· Near Pasir Panjang MRT station (SINGAPORE)

Interested candidates who wish to apply for the advertised position, please send full resume with the following details:

1. Reasons for leaving ALL your employment

2. Current & expected salary

We regret that only shortlisted candidates will be notified.

Job Types: Full-time, Permanent

Benefits:

· Dental insurance

· Health insurance

Schedule:

· Day shift

· Monday to Friday

· Weekend availability

Supplemental pay types:

· 13th month salary

· Performance bonus

Education:

· Local Polytechnic Diploma (Preferred)

Experience:

Sales: 2 years (Preferred

• Co-ordinate, program and monitor site work, material and workforce
• Attend site meeting and resolve technical issue with main contractor or consultant
• Implementation of Cost, Quality, Productivity, Safety and Health control on site
• Ensure procedures, standards and guidelines are followed and maintained
• Able to produce working and As-built drawing including O&M manual

Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

We are seeking a skilled Civil Engineer to support the site project. The candidate will also supervise concreting operations and manage estimation of Bill of Quantities, project progress claims and earthwork supervision. Proficiency in AutoCad to review and make necessary adjustment to project

drawings.

Position Summary:

• Responsible to work as a Project Manager. Overall responsibility for the project in all aspects including the overall quality, schedule, cost, HSE and human relations amongst the team members. Major proposals are considered as a specific type of project. The Project Manager is the chief representative of Worley to the Client for information or decision relative to the assigned project.

Technical/Functional Responsibilities:

• Acts as "hands on" manager in a complex network of interrelated activities necessary to move technical and engineering information forward to complete the design, construction and initial operation of the required facilities
• Ensures overall direction and coordination of efforts for major proposals, E/EPC contracts for services or alternatively as a combination of various smaller projects of a similar technology or for the same Client
• Enforces the solution of problems in the following phases of a project
• project development/process design/detailed design/engineering
  design/drafting/procurement/construction/start-up
• Ensures project execution within the HSE, cost, time, quality and technical objectives to which Worley is committed
• Issues HSE instructions to employees working on a construction site and checks the adherence to HSE regulations and instructions, and ensures training of personnel in HSE aspects of their respective duties
• Ensures project execution within the final objectives as determined by Worley’s management
• Ensures project parameters are in line with legal requirements
• Prepares and issues the project execution and quality plan. Issues the project schedule; the approved budgets for services; the approved budgets for equipment (number and basic design) and bulk material quantities if required by the nature of the project
• Is sole representative of Worley towards the Client
• Reviews all Client's requests for changes
• Approves all proposed contract variations (Client changes: on Client's request or identified) before submittal and negotiates payment with Client
• Ensures that required project information flows to him
• Issues instructions for historical filing if required
• Ensures the project release to the Client
• Ensures the compliance with authority requirements
• Responsibilities includes:-
• Meeting Worley’s financial targets as set for the projects under his supervision
• The overall planning, organization, direction, coordination and control of all operations to meet the project objectives
• The (progress) payments and final acceptance by the Client (within the contract conditions and at an optimum cash flow)
• The adherence to the Worley’s organization procedures, the project execution and quality plan and project procedures
• The preparation of the project close-out report according to the Worley’s organization procedure for close-out
• Verifying that contractors, upon contract award, have been instructed with regard to the applicable legal HSE regulations and Client’s requirements
• He has the overall responsibility with respect to HSE matters for a specific project, and delegates specific related activities to his team members
• Review of the HSE performance with the construction manager
• He is responsible for seeing to it that no adverse situations exist in the projects for which he is responsible. He will instruct the project team members accordingly and he will take or initiate the necessary corrective measures

Requirements:

• University engineer in mechanical or chemical engineering, preferably with training in management techniques (or equivalent) or Industrial engineer in mechanical or chemical engineering, preferably with training in management techniques (or equivalent)
• VCA basic HSE training (or equivalent) and VCA leading HSE training (or equivalent)
• 10+ years of experience in engineering & contracting of which 3+ years of experience as a Project Manager with at least a recent EPC contract
• Sound knowledge of project management techniques
• Good understanding of relevant contractual matters
• Sound knowledge of Worley’s procedures
• Working knowledge of the application of computerized systems particularly those to be used for projects
• Broad knowledge of other professional areas within Worley
• Proven ability to communicate
• Proven social skills

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

Seeking Site Engineer with prior knowledge and experience tomaintenance and troubleshooting and repair equipments such asTLD ACU, GPU, Tow Tractor, ASU, boom lift and scissors lift, hydrauliccylinder and general electrical troubleshooting. Will be deploy atvarious site in singapore for general repair, servicing andmaintenance of basic ground support equipment.