Responsibilities:

• Responsible for upkeep of cleanliness of office, compound, pantry and toilet
• Ensure safety practices and housekeeping are maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Requirement:

• Minimum 1 year of relevant experience
• Basic cleaning skills

• To conduct / plan safety inspection to verify safety provision and provide recommendations for improvements conforming to worksite rules and regulations to comply with statutory requirements
• To investigate any accident, dangerous occurrence or occupational disease that occurred within the workplace and provide recommendations for countermeasures to prevent recurrence
• Implementation and revision of Risk Management
• Liaise with Ministry of Manpower on safety issues and safety statutory requirements
• Establish, update, maintain, and implement the Safety & Health Management System
• To conduct relevant safety training needs e.g. Safety induction, Permit to Work, Safe Work Procedures etc.
• Identify training needs for safety personnel and recommend the required training to ensure competency of the workforce.
• To conduct Safety Committee Meeting to address safety issues and ensure a safe working environment for all personnel
• Ensure in-house rules and regulations are implemented and enforced diligently at the worksite.
• Coordinate safety promotional activities to develop and maintain safety awareness among all personnel
• Evaluate, select and control sub-contractors to ensure awareness of their safety obligations on site
• Review, assess and maintain the Safety Data Sheets
• Ensure storage, movement, use, and disposal of hazardous substances and chemicals are well managed
• Ensure the register of hazardous substances is up to date
• Continuously review the emergency procedure and update.
• Manage and control situations arising during an emergency
• Plan and implement occupational health programs to protect workers from health hazards such as noise, dust, toxic gases, vapors and radiation
• Coordinate safety audit and ensure the closure of all findings
• Coordinate the preparation and submission of all required safety reports e.g. Integrated Management System (IMS) Quarterly report, Risk Assessment review
• Updates on codes of practice & safety literature and circulates information to each level of employees
• Monitor the Safety Performance of the project as set by the company policy and objectives e.g. Accident Frequency Rate (AFR), Accident Severity Rate (ASR) etc
• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999
• Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)Ensure safety practices and housekeeping is to maintained to the highest standard

Requirements:-

• Must possess registered MOM WSH Officer license
• Min 3 years’ WSH Officer experience in Building projects

Responsibilities:

• To review, conduct incident / accident investigation and provide recommendations for countermeasures and to prevent recurrence of accident
• To coordinate of daily toolbox meeting and upkeep the records
• To conduct daily safety inspection and other type of safety inspection as required at work site
• To coordinate the immediate rectification of unsafe conditions and correct any safety malpractices on site
• Monitor and oversee the enforcement of In-house Rule and Regulation and ensure safe work practices on site
• Coordinate and conduct the safety induction course to all site staffs
• Submission of Quarterly EHS performance & 6-monthly review of Risk Assessment
• Ensure and to carry out duties in accordance to WSH Act & Integrated Management System
• Assist WSHO to establish, update, maintain, and implement the Safety and Health Management System
• To assist WSHO for all safety promotional activities, safety audits, safety meetings and execution of safety programmes

Requirements:

• Advanced Certificate in Workplace Safety and Health or equivalent
• Minimum 2 years of relevant working experience

As a fast-paced, growing business; this role will be responsible for significantly contributing to projects to deliver excellent service levels to clients and assist in the ongoing development and growth of the business, whilst providing sound technical, design and contract management support.

They should comply with B&W Engineering’s standards, procedures, process and implementations to ensure project requirements and clients’ specifications are fully met. Have the ability to demonstrate extensive experience in a wide range of technical areas and have a sound level of knowledge at Senior Engineer level.

Desirable experience would include the management of Data Centre projects..

Role Responsibilities and Requirements

Degree or higher in appropriate engineering discipline or have sufficient equivalent experience.

IES Electrical and Electronics Engineering Professional Membership desirable.

Singapore Professional Engineer registration or progress towards beneficial.

Proven experience in working within and running projects within a multi-disciplinary team with the successful delivery of the design for critical projects.

Experience in project management and MEP engineering track record with some experience of data centres or other critical engineering facilities.

Knowledge of MS Office applications Outlook, word, excel, PowerPoint etc

Knowledge of Dialux, Trimble (Amtech) Etap /AutoCAD/Revit/ BIM/CAD calculation software.

Ability to use IT based calculation and spreadsheet software.

Significant experience in production of drawings, calculations, schedules & specifications for a range of building types

At least 5 years overall experience with 3 years Data Centre design

Broad design experience across Commercial, High Rise, Hotels & Leisure would be beneficial

Demonstrate a thorough understanding of the design process.

Peripheral experience in architecture, structures, civils, security and permitting.

Excellent understanding of the various code requirements and standards across the APAC region.

Sound knowledge of key Health and Safety issues and legislation including Singapore Design for Safety (Dfs)

Ability to keep clear and accurate records and reports.

Understand and maintain the long-term goals of the business.

Understand the company QA process, maintain and contribute to the same standards across the APAC region

Ability to work autonomously, as part of a wider team.

Ability to embrace an intensively collaborative design environment working for and reporting daily to an expert client.

Ability to proactively step outside the role of conventional design regiment and stages to achieve the client’s deliverables.

Flexible and willing to travel to service international projects and customers.

Possess exceptional clear communication skills and command of spoken/written English.

Have an appreciation of different cultures/races and embrace the same.

Be a motivated, highly dependable

Maintain an appropriate knowledge of industry initiatives.

Job Description

• Monitor strict compliance of “Permit to Work” system at worksite & explain the importance to workers at the time of safety talk/tool box meeting
• Coordinate Environmental Control Committee Meeting and implement all environmental control programs
• Maintain mandatory records and other documentation as required by the regulatory authorities
• Ensure compliance of operations with NEA and EHS regulations
• Prepare Site Environmental Control Report on a regular basis
• Conduct environmental control audit and investigations
• Able to maintain environmental requirements in line with OHSAS 18001:1999
• Ensure compliance with environmental regulations, develop environmental control plan, site clean-up plans & monitor their completion

Requirements

• Candidate must possess at least Diploma/Degree in Civil Engineering or its equivalent
• Candidate must be a NEA registered ECO
• Must be a registered ECMO
• Minimum 3 years’ relevant experience in Building Construction
• With FSM certificate will be an advantage
• Must have professional knowledge in law and regulations of Environment Acts

Job Description

• Implement appropriate safety measurements in accordance with the Workplace Health and Safety Act
• Enforce all safety requirements and company safety rules and regulations
• Conduct regular site checks and take appropriate corrective actions
• Conduct regular inspection to ensure ECM and environmental plan in place
• Maintain and update all WSH records, certificates and reports in accordance with WSH legislation
• Investigate accidents, incidents, or near misses to determine the root causes and prevent future occurrences.
• Maintain accurate records related to safety training, incidents, inspections, and compliance activities.
• Stay current on industry best practices and continuously seek opportunities to improve workplace safety.

Requirements

• Registered WSH Officer with MOM
• Minimum 3 years relevant working experience in construction industry
• Occupational Safety Management (including fire & safety management)
• Experience in JTC/ Private Housing (condominium) will be advantageous.

Please include the projects you have worked on in your resume.

Job Description

• Prepare and analyse cost comparison..
• Providing information of all the contract documents, correspondence and other information to ensure a proper performance of contractual obligations.
• Obtaining quotations, liaising and negotiate with sub-contractors and suppliers.
• Responsible for measuring quantities and taking off.
• Strong understanding of construction and engineering principles.
• Knowledge of relevant construction contracts and procurement processes.
• Analytical skills to evaluate and manage project costs effectively.
• Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments
• All other QS related job

Requirements

• Degree / Diploma in Quantity Surveying
• Min 5 years and above experience as Senior Quantity Surveyor in main-con companies
• Proven ability in contract negotiation, contract administration & variation orders
• Proficiency in Microsoft Excel and Golden software
• Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive & able to meet tight deadlines
• Preferably with working experiences in MRT projects
• 5 days work week

1. Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.
2. Required language(s): Preferably English and Mandarin spoken.
3. At least 6 Year(s) of working experience in the related field is required for this position.
4. Preferably specialist in Engineering - Electrical or equivalent.
5. Must have knowledge in Instruments and Electrical System for Process Control Environment
6. Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants.

2) Troubleshooting and problem solving for field Instruments.

3) Calibration and commissioning of field Instruments.

4) Electrical equipment troubleshooting and general maintenance for the process plant.

Needed to perform administrative duties in the company such as

Workforce Records and Training needs

Procurement of Materials & Office supplies

Collection of Materials

Coordination with various Project sites

General Housekeeping in Office

Assist in HR Matters

Experience in work permit matters

Should have good knowledge of excel

Must be able to communicate with various parties

SUMMARY

· This position is responsible for supporting projects leading to the success of project.

· The Project Manager to lead the project team in achieving project goals and gaining high customer satisfaction.

· The Project Manager will ensure the quality of the project is met within the allocated budget and timeline.

SUPERVISORY RESPONSIBILITIES

· Mentor and lead Project Managers in completing projects within allocated resources as assigned by PM Manager.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Including the following with other duties as assigned:

· Responsible for driving customer satisfaction through focus on accountability and quality.

· Be the point of contact for customer to all issues.

· Drives global meetings of project on behalf of customer to assure the success of project.

· Continuous tracking of project performance and schedules of internal stakeholders and external stakeholders.

· Validate project workscope, ensure up to date technical scope of work.

· Assure compliance to contract commitments and ensure turnkey design within scope of work.

· Identify out of scope work to sales and initiate CIP to sales if necessary.

· Assure proper coordination between internal departments (all technical project lead) and project stakeholder for technical integration with a project execution plan.

· Coordinate with all project stakeholders and customer to align towards common objectives and goals of the program.

· Integrate stakeholders’ timeline and develop a detail plan with key activities (timeline) into an overall project schedule and ensure all team member, suppliers and customer are fully acceptable to it.

· Understands intermediate regulatory certification requirements and provide recommendation to customer for meeting regulatory certification requirements in the turnkey packages per workscope.

· Create and manage project budgeted resources (hours and hard cost), cost recording, control and forecasting.

· Identifying risk and create risk management analysis with means of stop light chart, etc and present to management during weekly project review meeting.

· Implement and improve good Project Management Tools for effective usage.

· Continuous maintaining the relevance of Project Management Processes & Procedures.

· Overseas travel will be required.

· Other duties as assigned.

QUALIFICATION REQUIREMENTS

· Qualified degree or Masters in Mechanical/Electrical Engineering, Aerospace Engineering.

· At least 4-5 years experience in aircraft interior reconfiguration engineering.

· Knowledgeable of aircraft and interior reconfiguration engineering requirements.

· Able to read and understand aircraft designs, drawings and specifications.

· Good understanding of Part 25 regulatory and compliance requirements.

· Able to apply knowledge of business and management principles involved in strategic planning, equipment allocation/management, complex leadership techniques and coordination of people and resources.

· Able to work in a team environment and accept required roles, responsibilities and accountability.

· Able to multi-task and work independently

Job Description

• Manage all purchasing duties and administrative works.
• Monitor and keep optimal inventory levels.
• Manage and monitor supplier delivery performance.
• Review aging inventory monthly.
• Generate monthly purchasing report for management.
• Source, evaluate and qualify suppliers.

Job Requirements

• Minimum Diploma Level and above.
• Minimum 2 years of procurement experience preferably in Construction/Engineering industry.
• Understanding of Procurement process.
• Have excellent negotiation skills.
• Proficient in Microsoft Office,especially Microsoft Word & Excel.
• Immediate availability preferred.

Responsibilities

· Lead project team and facilitate their ability to complete the project on time

· Manage and oversee the day-to-day management of projects and on-site works

· Responsible for ensuring smooth implementation and monitoring of work progress.

· Supervise workers and sub-contractors to ensure works are carried out as per schedule and in good quality

· In charge of the planning, assessment and implementation of the whole project safety system and ISO system

· Communicate and coordinate with clients and consultants, clarify requirement, plan, monitor and control the project, including carrying out implementation of the project.

· Preparation of site progress report and necessary documentation and attend daily site meetings

· Identify and resolve site issues effectively and efficiently.

Requirements

· Degree or Diploma in Electrical Engineering or its equivalent

· Min 5 years relevant experience with at least 3 years project management experience at local projects

· Strong technical abilities and interpersonal skills

· Highly motivated and possess strong leadership qualities and the ability to work independently in a challenging environment.

· Able to communicate effectively at all levels.

Responsibilities

• Drafting & designing of routing for Electrical building services drawings in AutoCAD
• Prepare detail design and working drawings such as schematic diagrams, single-line diagrams arrangement/layout drawings.
• Coordinate with Engineering team to ensure works are carried out in accordance with drawing specification.
• Update all drawings as per site/vendor modifications for As-Built Drawings.
• Ensure compliance to Electrical Standards
• Candidate will require to design and draw for Building services, e.g., Electrical, Air conditioning, Plumbing, Sanitary and Fire Protection services etc.
• Attending the meeting with consultants, contractors as part of project.
• Familiarity with 3D modelling tools is preferred.
• Required to maintain all drawing files, update drawings as needed, and make corrections to drawings as directed by the Section Heads / Leads.
• Coordination of drawings with Clients / Main Contractors and updating of drawings base on Meetings and discussion and in compliance to Regulation Codes and Practices
• Familiar with BIM documentations and shop drawings directly from the models

Requirements

• Degree or Diploma in Electrical Engineering or its equivalent
• At least 2 years of experience.
• Able to read Building drawings, good in Autocad.
• Well-versed in building regulations and local design codes.
• Proficient in AutoCad drafting and Microsoft Office.
• 3D BIM Modelling in Autodesk
• Good interpersonal skill with the ability to connect with and influence stakeholders with different objectives
• Able to solve problems under pressure
• LTA Project References will be an added advantage

Job Title: Assistant Electrical Engineer – M&E

Occupation: Assistant Electrical Engineer (General)

Salary Range: 2.6K – 5K

Job Description

• Planning, design, assembling and installing equipment and facilities.
• Coordinate and liaise with main con, consultants, sub-contractors.
• Supervise and check subcontractors’ works according to design drawings, specifications and regulation.
• Plan and prepare projects based on stage of activities, schedule work activities.
• Reporting to electrical engineer if discrepancies in safety measures or installation procedures are found and take steps to solve the problem.
• Check and ensure the equipment and material offered in compliance with the specification and drawings.
• Oversee and be overall responsible for works carried out by supervisors assigned under his/her care.
• Generate incident reports
• Perform all other duties as assigned and required.

Requirements

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic) or equivalent.
• At least 3 year(s) of working experience in the construction or Electrical related fields is required for this position.
• Required Skill(s): Microsoft Office, Microsoft Project, Autocad, Project Management
• Preferably Junior Executive
• specialized in Engineering- Electrical or equivalent.

Job Descriptions

• Preparation of Tender submission & project budgets
• Monitoring of procurement process
• Preparation of cash flow forecast Valuing completed works, filing of progress claims and all other necessary contract documents administration works
• Prepare interim valuation and certificate of sub-contractors claims according to work completed and evaluate variation claims
• Monitoring of procurement process
• Attendance of site/technical meetings
• Evaluation of price comparison summary
• Any other ad-hoc duties as assigned

Requirements

• Degree in Construction, Quantity Surveying or equivalent
• Strong technical background with sound knowledge of pre and post-contract duties
• Proficient in MS Office especially in Excel & Power Point
• Possess good writing, communication and interpersonal skills
• Drafting knowledge using AutoCAD is an added advantage
• Fresh Graduates are welcome to apply

We are looking for an Electrical Engineer with 2-5 years working experience who would have the following experience / knowledge/ qualities :-

• Basic Electrical Building Services Design knowledge
• Familiar with local codes and standards (e.g SS 568, 560 etc)
• Able to perform cable size and voltage drop calculation conforming to local codes and standards. Familiar with earthing and lighting protection works.
• Familiar with CAD software and able to make minor modification independently.
• Self-motivated individual able to lead a team of supervisors and electricians independently.
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Coordinate and support Project LEW for Power Turn ON, Testing and Commissioning.
• Project progress monitoring & updating to Project Manager
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g. cable containment routing drawings, small power and lighting layout etc)

Requirements

• Min Diploma in Electrical Engineering or equivalent
• Strong technical background with sound knowledge of electrical construction works
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Possess good writing, communication and interpersonal skills
• Drafting knowledge using AutoCAD is an added advantage
• Working in a “Live” process plant is an added advantage.
• Fresh Graduates are welcome to apply

• To ensure worforce compliance with WSH regulation, Compancy/Client procedures at site
• Conduct daily tool box meeting, safety checks and review Job hazard analysis
• Safety observation reports
• Fatigue Management
• Participate in company internal safety audits
• Responsible for upkeep of documentation on project matters
• Minimum 2 years working experience in Process/Construction Sector
• Advace Certificate in Workplace Safety and Health
• Working at Height Supervisor certificate
• Certified First Aider
• Managing Working at Height certificate will be advantage
• Lifting Supervisor certificate will be an advantages
• Possess minimum class 3 license will be an advantage

We are looking for an Instrumentation Engineer with minimum 5 years experience who would have the following experience/knowledge/qualities:-

• Familiar with local and international instrument and panel installation standards
• Hands on experience in calibration of instruments
• Able to Perform Loop checks
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Self-motivated individual able to lead a team of supervisors and Technicians independently.
• Project progress monitoring & updating to Project Manager.
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g Hook up drawings, P&ID, Instrument index, I/O list etc)
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Working experience in “Live” Process plants is an added advantage

We are an Electrical & Instrumentation Contractor specialising in installation works in Oil & Gas Plants, Pharmaceutical Plants, Wafer Fab, Commercial and Industrial Projects.

We being a SME company, you shall have good development Opportunities and chance for Outstanding career growth.

Job Description

• Must be a passionate and Energetic leader who is able to guide and manage the People
• Good understanding on Cost Control, Variations and Change Control
• Able to monitor and control procurement of materials in an orderly manner
• Able to Handle own and sub contractors people on site and timely control on handling complaints, settle disputes and grievances of personnel.
• Handle Clients for Business, Safety , Cost and Timely construction activities
• Has to Identify potential issues and resolve it before it becomes an issue

Requirements

• You must be well versed technically and practically with the Electrical installations and basic design as per Singapore Standards.
• You should adapt with RNC’s ISO systems (Quality and Safety) and be innovative to suggest improvisation in the system.
• Knowledgeable in Lighting, Small power, Earthing, Lightning Protection and ELV systems.
• Good Organisation skills, planning and Prioritizing works.
• Go-Getter mindset and good in communication.
• Responsible for actions of the Team on site.
• Minimum 3 year experience as a project manager.
• Proficient in MS Office (e.g Excel & Power Point).
• Possess good writing, communication and interpersonal skills.
• Working in a “Live” process plant is an added advantage.
• Knowledge on Instrumentation works shall be an added advantage.
• Class 3 Licence is an added advantage.

Job Title -Plumbing Site Engineer

Job Description & Requirements.

1. Involve in Programming, Scheduling, and Progress tracking of projects·

2. Co-ordinate with Site Supervisor and Sub-contractors on progress matters and prepare monthly and weekly reports·

3. To develop, monitor, and review equipment and manpower deployment plans for project sites·

4. To perform monthly/weekly/daily project progress reporting activities·

5. To monitor the progress of projects and Update the management for any schedule variances·

6. Act as a point of contact and communicate project status to all participants·

7. Any other ad-hoc assignment being assigned from Superior·

8. Knowledge of Plumbing/Sanitary Works an added advantage.

Requirements:·

1. Diploma or Professional Certificate in Engineering (Mechanical) / Construction or equivalent.·

2. Min 1 years experience in similar experience and managing a few sites.·

3. Excellent communication and presentation skills.·

4. Knowledge in project management.·

5. With BCA BCPPF qualifications is an advantage.

6. Knowledge of Plumbing/Sanitary and Gas as an Advantage.

Roles & Responsibilities

Descriptions

· Pick up and drop off passengers at designated locations

· Follow a planned route according to a time schedule

· Ensure that the trips stay on schedule

· Ensure the safety of passengers both onboard the bus and when alighting

· Obey traffic laws

· Follow procedures to ensure passenger safety

· Keep passengers and other road users safe

· Crowd management skills

· Perform basic maintenance (check the bus tires, lights, and oil)

· Keep the bus clean and presentable to the public

· Report all incidences and traffic disruptions to HQ

· Will be required to work on Sat/Sun/PH

Job Requirements

• Candidate must possess Degree.
• Able to perform shift work.
• Able to start work immediately or within short notice period would be advantageous.
• Good navigation skills and knowledge of local routes are essential and will be an advantage.

Receptionist

Job Description

We are looking for a receptionist to be responsible for being the face of the office - greeting clients and visitors and general admin duty. You will be in charge of contacting employees regarding visitors, answering phones and taking messages, and sorting and distributing mail.

The candidate will need the following: flexibility is essential, as well as a willingness to assist with tasks, help solve unforeseen problems, answer queries etc. Good communication is an essential attribute as we will supporting an office of various nationalities.

General Duties:

Reception:

• Meet and greet visitors and notify appropriate staff of their arrival
• Answering / transferring incoming calls, helping with enquiries
• Ensure reception area is tidy and presentable, with all necessary stationery and material (e.g. pens, forms and brochures)
• Update calendars and schedule meetings
• Perform other clerical receptionist duties such as filing, photocopying and shredding

Admin:

• Post - sort and distribute mail to employees; process daily outgoing mail
• Facilities Management
• Take care of incoming and outgoing courier packages and other deliveries
• Order/manage pantry supplies
• Working together with the office cleaners to keep office and meeting rooms tidy
• Organize stationery orders and maintain stationery stock levels
• Assist with ad hoc tasks as required (i.e. buying lunch, running errands)

Qualifications:

Knowledge And Experience:

• Previous experience as an office receptionist is preferred

Qualification And Skills:

• English language proficiency
• Demonstrated ability to use initiative
• Ability to multi-task
• Ability to work well independently as well as being a team player!
• Eye for detail

Job Descriptions:

• Identify and source suppliers for both direct and indirect materials/services to expand the supplier base and meet new project and production requirements.
• Obtain quotes from newly identified suppliers to determine costs and explore opportunities for cost reduction.
• Lead negotiations with suppliers on a regular basis to ensure competitive pricing for materials and services.
• Participate in supplier qualification audits to ensure compliance with company standards and requirements.
• Evaluate and approve suppliers for inclusion in the approved vendor list.
• Conduct regular performance reviews of suppliers to monitor quality and assess capabilities.
• Maintain and update standard operating procedures for the procurement department to ensure consistent workflow processes.
• Develop and negotiate favorable supply agreements with suppliers to optimize procurement processes.
• Collaborate with other departments and suppliers to establish efficient supply chain models with minimal inventory holdings.
• Work with engineering and warehouse departments to ensure adherence to quality standards for supplied items.
• Provide the sales department with periodic quotation templates for standard products and generate quotations based on customer requirements.
• Complete any additional tasks or projects assigned by management.

Job Requirements:

• Possess a degree in Mechanical Engineering or a Diploma in Mechanical Engineering with 2-3 years of relevant experience.
• Diploma holders should have at least 2 years of experience in sourcing components and fabrication parts.
• Proficiency in Microsoft Word and Excel is essential.

Our client is actively searching for a Senior Professional Officer, Chemical Process Engineering to join their team!
If you are a dynamic individual seeking a new career opportunity, read further!

The responsibilities of this role are:

• Design and teach labs & practice modules
• Mentor students in Capstone Projects and the Integrated Work Study Programme (IWSP)
• Lead or co-lead innovation projects with industry
• Manage labs and equipment to support academic programmes and applied research

The ideal candidate will need to have the following qualities and experience:

• A good degree in Chemical Engineering or a related field. Masters, PhD and/or relevant professional certifications would be advantageous
• Deep technical specialist with 10 or more years of working experience in the Chemical Process Technology field would be preferred
• Operational Knowledge in unit operations (for e.g. Heat Exchanger, Distillation Column, Reactors, Cooling Tower etc)
• Practical knowledge of Quality Management Systems and Engineering standards including but not limited to ISO9001, OSHA and BSI etc
• Practiced in Chemical Process Design software (for e.g. HYSYS)
• Extensive experience and knowledge of industry practices to bring industry perspective to the University
• Keen interest in innovation projects, with demonstrated ability in developing solutions to technical problems
• Strong supervisory skills and enjoy working closely with students in an educational environment.

CTES Consulting PTE LTD

EA License No.: 07C3481

EA Personnel Registration No.: R1104237 (Jaclyn Tan)

Job Duties

• Manager BIM Team and BIM Implementation Plan
• Produce timely delivery of Electrical drawings using BIM software
• Involve in BIM project setup and administration
• Attend meeting with relevant parties for BIM standards coordination and requirements

Job Requirements:

• Diploma or Nitec in Electrical Engineering and / or BIM Certificates
• Proficient in AUTOCAD, REVIT MEP & BIM Process
• Able to work in a fast pace environment and handle tight deadlines