- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

Job Description & Requirements

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

~ Support HSSEQ department in ensuring ship operations are in compliance with internal company procedure

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

~ Support HSSEQ department in ensuring ship operations are in compliance with internal company procedure

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Organisation Context

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the TopSKY-ATC(HE) product line.

Role Description

The Engineering Delivery Management (EDM) role is focused on technical management of all engineering activities. They provide direction, guidance, expert advice, mentoring, support, audit, and workflow management (tasking prioritisation and resource coordination) in support of achieving project objectives and milestones in accordance with the approved schedule. The EDM will manage a multi-skilled team of system, software, integration, V&V and infrastructure engineers to provide on time delivery of services and support for systems and/or sub-systems of products, or for projects, across multiple platforms.

Responsibilities

· Provide direction, expert advice, mentoring, and workflow management (including task prioritisation and resource coordination) in support of achieving project objectives and milestones

· Lead a multi-skilled team of engineers to deliver software engineering solutions, aligning team capability to meet customer expectations

· Lead technical reviews, workshops, peer reviews and project reviews as appropriate for the program

· Prepare and lead the monthly TFR and support the WPPR

• Communicate, analyse, plan and report as necessary to align team capability and customer expectations

· Identify / Review risks, and proposing effective solutions; executing mitigation actions and reporting on outcomes / cost savings and residual risks

· Define and tailor the software engineering environment and the process, practices and tools applicable to the project

· Provide guidance to technical teams with regard to engineering matters aligned to the agreed architecture, to ensure effectiveness whilst meeting customer requirements

· Ensure the timely delivery of software releases in support of the integration and test program

· Promote knowledge sharing and ensuring that work is captured sufficiently for re-use across projects

• Provide support to bids, produce/review Engineering Cost estimates for any modification proposals to the functional baseline
• Provide support during the analysis of Customers requirements to propose and negotiate win–win solution responses with Customers based in Australia and worldwide
• Ensure clear communications (written and verbal) with external customers
• Manage customer scope iaw approved baseline/schedule
• Manage customer expectations

· Deliver iaw Thales processes and practises and contribute to their improvement

Knowledge, Skills & Experience

Qualifications

· Degree in Engineering, Computer Science, IT or other relevant qualification

Essential Experience

· Solid experience of managing the development of real time distributed complex software centric solutions in a safety critical environment

· Solid experience in total life cycle of complex software development, including processes and responsibilities at each stage in the cycle

· Solid knowledge and experience in Systems Engineering lifecycle (eg. EIA632, ISO/IEC15288)

· Advanced analytical and problem-solving skills, with the ability to engage a wide range of stakeholders across a complex environment

· Solid eperience of leading and mentoring team of multi-skilled engineering team, fostering a collaborative and productive work environment

· Solid experience in upskilling and training new engineers

· Experience in managing software development projects using Agile methodologies and the ability to drive iterative development processes

· Strong experience of using Earned Value Management, Work Package Control and reporting, with exposure to scheduling tools (MS Project, Primavera etc.)

· Financial / budgetary management of engineering work packages or tasks

· Strong ability to communicate effectively with various stakeholders, including Project, Engineering Delivery Managers, Product Owners, Technical Design Authorities, Speciality engineers and the engineering team under management.

· Collaboration tools including Jira, Confluence etc.

Desirable:

· Air Traffic Management domain expertise (inc. standards such as ICAO, Eurocontrol, AIDC)

· Experience in product delivery using agile methodologies like Lean methods (including PDCA, Kanban, Value-Stream Mapping); prior experience working Agile @ Scale framework is a bonus

· Programming/Scripting Languages; Java, C++, Ada, Python, Bash

· Experience working in a Linux/Unix development environment

General / Special Requirements

GENERAL

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for continuous improvement and knowledge sharing

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

• Operate precision CNC turning/milling machine
• Perform CAD/CAM programming
• Interpret Engineering Drawings and Feature of Control Symbols
• Simple setting up of work piece and tooling set up
• Check and maintain machinery daily to ensure functionality
• Able to handle 8" to 12" chuck CNC Turn/Mill Machine, Fanuc control

Requirement

• Proficient in Quality Consciousness with the ability to meet productivity goals
• Must have good interpersonal communication skills and a positive team attitude
• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre

1. Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.
2. Required language(s): Preferably English and Mandarin spoken.
3. At least 6 Year(s) of working experience in the related field is required for this position.
4. Preferably specialist in Engineering - Electrical or equivalent.
5. Must have knowledge in Instruments and Electrical System for Process Control Environment
6. Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants.

2) Troubleshooting and problem solving for field Instruments.

3) Calibration and commissioning of field Instruments.

4) Electrical equipment troubleshooting and general maintenance for the process plant.

Key Responsibilities:

· Responsible for managing Accounts Payable (AP), Accounts Receivable (AR), and General Ledger (GL) functions

· Prepare AR invoices, monthly debit and credit notes .

· Generate reports for management related to payable suppliers and prepare monthly bank reconciliation and financial statements

· Check and classify account codes in receipts and payment vouchers and prepare journal entries for non-cash items using Excel

· Prepare quarterly GST submissions, monthly cash flow statements, and monitor monthly stock balance and prepare stock ledgers

· Implement and execute departmental and organisational controls and procedures

· Instruct and process all marine industry sub-contract work

· Responsible in payroll processing.

· Perform and Handle tax clearance.

· Handle work pass application, renewal and cancellation and work pass related matters including tax clearance.

· Maintain and Update Employees Files and Record in Hr system.

· Handle and Resolve queries on payroll related matter.

· Communicate with shipyard and MOM to follow and to implement new measures on foreign workers.

· Handling comprehensive work permit application, Worker Grievances and workers welfare.

Required Skills and Qualifications:

· Minimum Diploma in Accounting or Finance

· At least 4 years of experience in a similar role

· Experience in Marine, Construction or Process Industry

· Strong knowledge of accounting principles and standards

· Proficiency in Microsoft Excel and other accounting software

· Excellent attention to detail, organizational, and communication skills.

eqponsibilities :

• Maintenance of invoices i.e. scanning, updating and posting of invoices in system
• Processing of payments to vendors and perform bank reconciliation
• Liaison with vendors for missing invoices/payment status
• Attach daily bank advice in accounting system
• To perform ad-hoc duties as per assigned

Requirements

• O Levels/ LCCI / Certificate / Diploma in Accountancy or equivalent
• Computer skills and Microsoft Office
• Minimum 1 year of related experience

• To conduct / plan safety inspection to verify safety provision and provide recommendations for improvements conforming to worksite rules and regulations to comply with statutory requirements
• To investigate any accident, dangerous occurrence or occupational disease that occurred within the workplace and provide recommendations for countermeasures to prevent recurrence
• Implementation and revision of Risk Management
• Liaise with Ministry of Manpower on safety issues and safety statutory requirements
• Establish, update, maintain, and implement the Safety & Health Management System
• To conduct relevant safety training needs e.g. Safety induction, Permit to Work, Safe Work Procedures etc.
• Identify training needs for safety personnel and recommend the required training to ensure competency of the workforce.
• To conduct Safety Committee Meeting to address safety issues and ensure a safe working environment for all personnel
• Ensure in-house rules and regulations are implemented and enforced diligently at the worksite.
• Coordinate safety promotional activities to develop and maintain safety awareness among all personnel
• Evaluate, select and control sub-contractors to ensure awareness of their safety obligations on site
• Review, assess and maintain the Safety Data Sheets
• Ensure storage, movement, use, and disposal of hazardous substances and chemicals are well managed
• Ensure the register of hazardous substances is up to date
• Continuously review the emergency procedure and update.
• Manage and control situations arising during an emergency
• Plan and implement occupational health programs to protect workers from health hazards such as noise, dust, toxic gases, vapors and radiation
• Coordinate safety audit and ensure the closure of all findings
• Coordinate the preparation and submission of all required safety reports e.g. Integrated Management System (IMS) Quarterly report, Risk Assessment review
• Updates on codes of practice & safety literature and circulates information to each level of employees
• Monitor the Safety Performance of the project as set by the company policy and objectives e.g. Accident Frequency Rate (AFR), Accident Severity Rate (ASR) etc
• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999
• Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)Ensure safety practices and housekeeping is to maintained to the highest standard

Requirements:-

• Must possess registered MOM WSH Officer license
• Min 3 years’ WSH Officer experience in Building projects

Responsibilities:

• To review, conduct incident / accident investigation and provide recommendations for countermeasures and to prevent recurrence of accident
• To coordinate of daily toolbox meeting and upkeep the records
• To conduct daily safety inspection and other type of safety inspection as required at work site
• To coordinate the immediate rectification of unsafe conditions and correct any safety malpractices on site
• Monitor and oversee the enforcement of In-house Rule and Regulation and ensure safe work practices on site
• Coordinate and conduct the safety induction course to all site staffs
• Submission of Quarterly EHS performance & 6-monthly review of Risk Assessment
• Ensure and to carry out duties in accordance to WSH Act & Integrated Management System
• Assist WSHO to establish, update, maintain, and implement the Safety and Health Management System
• To assist WSHO for all safety promotional activities, safety audits, safety meetings and execution of safety programmes

Requirements:

• Advanced Certificate in Workplace Safety and Health or equivalent
• Minimum 2 years of relevant working experience

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for Research Assistant for CAR-T cell manufacturing program in the Immune Cell Engineering Laboratory of the National University of Singapore. Our group is committed to delivering transformative and novel cellular therapies for patients with cancer. We have a strong track record of successful cell manufacturing for clinical trials in accordance with regulatory guidelines. Appointments will be made on a 2-year contract basis in the first instance, with the possibility of extension.

Purpose of the post

The role of the research assistant is to support immune cell manufacturing, including CAR-T cells, for several ongoing clinical trials. We are seeking highly motivated, conscientious and meticulous individuals to join our experienced team, be trained in Good Manufacturing Practices (GMP) and be involved in research aimed at improving the treatment of patients with cancer.

Main Duties and Responsibilities

1. work in a (GMP)-certified facility manufacturing immune cells for clinical use, including CAR-T cells.
2. apply various techniques in tissue culture, molecular biology, flow cytometry under rigorous GMP conditions, for which training will be provided.
3. work effectively within a team of other skilled cell engineers
4. be able to practice meticulous bookkeeping and documentation in accordance with regulatory requirements
5. Maintain the highest standard of professional conduct and record keeping in accordance with policies and procedures.
6. Assist with any other duties of a similar nature that are delegated by the PI.

Qualifications

The applicant should:

1. Have a Bachelor of Science degree in Biomedical Sciences (those with no experience are welcome to apply)
2. Have experience in general laboratory techniques, especially aseptic tissue culture techniques
3. Be able to work independently and in a team, have an investigative nature with great attention to detail
4. Have knowledge of computer applications, e.g. MS word, MS excel

Application

Remuneration will be commensurate with the candidate’s qualifications and experience. Informal enquiries are welcome and should be made to Dr Bernice Oh at [email protected]

Formal application: Please submit your application, indicating current/expected salary, supported by a detailed CV (including personal particulars, academic and employment history, complete list of publications/oral presentations and full contacts of three (3) referees to this job portal.

We regret that only shortlisted candidates will be notified.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a research project where you will be part of the research team to develop yeast and fungi for food ingredient and biochemical production. The specific goals are:

1. Metabolic engineering of Yarrowia and Candida yeasts for organic acid production
2. Design and optimization of fermentation method in 10L and 100L stirred tank vessels

Key Responsibilities:

• Fulfill the primary responsibilities within the project:
  i. Deliver structured presentations of research plans and findings every two weeks.
  ii. Provide guidance and mentorship to junior research engineers and undergraduate students working in the same research field.
  iii. Prepare scientific manuscripts for reporting and potential publication (as first or co-author).
• Prepare writeup for new research grant application
• Support undergraduate lab class conduct where applied research outcomes are utilized in undergraduate teaching.
• Conduct thorough risk assessments and ensure adherence to work, safety, and health regulations for all research activities.
• Coordinate procurement activities with licensed vendors for research items.

Job Requirements:

• Have a relevant PhD degree in Biochemistry or Biochemical Engineering
• Have at least 1 year experience with the metabolic engineering of Yarrowia and Candida yeasts, including foreign gene expression and gene deletion.
• Have at least 1 year experience with the use of bioreactor, HPLC-MS and GC-MS.
• Prior experience in the genetic manipulation of filamentous fungi cell line engineering is advantageous.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative, take ownership of work, and able to cope with failures

Position Overview

Autodesk is seeking a highly motivated, experienced Senior Engineering Manager to join our Autodesk IAM Platform team. The Autodesk IAM platform is central to ensuring secure, seamless, and scalable access management across our suite of 150+ Autodesk desktop, mobile, web applications, and smart devices. This platform plays a critical role in managing authentication, authorization, user profiles, and entitlements, serving millions of customers daily and empowering a growing ecosystem of third-party developers and smart devices.

As a Senior Manager of Software Engineering, you will lead and oversee multiple teams of engineers dedicated to advancing our IAM platform. You will be responsible for the strategic direction, technical excellence, and delivery of innovative, secure, and robust IAM solutions. The platform you will help build needs to be highly resilient and available, ensuring that Autodesk’s services are reliable and performant at all times, even under the most demanding conditions.

The ideal candidate has extensive experience leading large teams in the development of modern cloud-based services, particularly in a fast-paced, agile environment. You should have a strong understanding of cloud security and be adept at driving the technical vision and strategy for identity services.

Your leadership will be critical in ensuring that Autodesk’s IAM services remain cutting-edge, resilient, and capable of supporting the evolving needs of our global customer base. You excel in mentoring engineering leaders, fostering a culture of innovation and security, and ensuring the successful delivery of complex, scalable IAM solutions.

Responsibilities

• Lead a team of software engineers to ensure execution and unlock creativity
• Develop staff by coaching, facilitating career aspirations and providing growth opportunities
• Regularly communicate with team members, provide feedback, conduct performance evaluation
• Build collaborative partnerships with the Software Architects, Technical leads, Product Owners, Product Managers and Experience Designers
• Create an inspiring team environment with an open communication culture. Foster continuous improvement and iteration
• Provide insight, feedback, and recommendations to senior management regarding the development, capabilities, and potential of current and future software projects
• Provide leadership to achieve high standards of “done” in areas of quality, security, scalability, user experience
• Aid in designing and building solutions, frameworks, automation, and orchestration for a broad range of applications and infrastructures, including cloud services and desktop solutions
• Collaborate with a geographically dispersed team and stakeholders
• Take complete ownership of the initiative and deliver it end to end while working with various stakeholders

Minimum Qualifications

• BS/MS in engineering, computer science, or equivalent industry experience
• 15+ years of relevant industry experience, with 7+ years of hands-on technical leadership and 7+ years of experience managing development teams
• Previously managed teams of engineers with ownership of high scale, production systems
• Experienced in one or more of the tech stacks and tools that includes AWS, Golang, C#, Python, Java etc
• Experienced in creating telemetry for the service using Splunk, New Relic, Datadog or their equivalents
• Skilled in big picture thinking and a willingness to learn and dive into unfamiliar systems and resolve complex and ambiguous issues both from a business and technical perspective
• Experience working in fast-paced, agile development environments, with a focus on iterative improvement and flexibility
• Proven ability to define and drive the technical vision and strategic direction for complex platforms
• Proven track record of leading large engineering teams with a focus on cloud-based services
• Experience in driving technical excellence and continuous improvement, ensuring the delivery of high-quality, scalable solutions
• Solid understanding of software development lifecycle, principles, practices, and methodologies
• Have insights about common engineering practice challenges and had experience of leading team to fix/improve them
• Willingness to collaborate with colleagues across different time zones which may require limited work outside normal working hours

The Ideal Candidate

• You understand what it takes to deliver scalable and secure IAM solutions
• Ability to define and drive the technical vision and strategic direction for complex platforms.
• Strong understanding of cloud security principles and best practices
• Experience working in fast-paced, agile development environments, with a focus on iterative improvement and flexibility.
• Ability to ensure the IAM platform is highly resilient and available, supporting reliable and performant Autodesk services.
• Excellent communication and collaboration skills to work effectively with cross-functional teams and stakeholders

Summary:

At Energy Supplies & Engineering (S) Pte Ltd, we are leaders in delivering specialized HVAC solutions in Singapore, focusing on dehumidification systems, Dedicated Outdoor Air Systems (DOAS), and other custom-engineered products. Our clients span various industries, including data centers, manufacturing, and commercial facilities, and we are dedicated to providing reliable, high-quality solutions.

As we continue to grow, we are looking for a dedicated Sales & Application Engineer to join our team. In this role, you’ll be pivotal in connecting customers with technical solutions, supporting the sales team, and managing customer relationships to ensure our clients receive top-notch service and solutions.

Key Responsibilities:

Technical Sales Support - Assist the sales team by understanding customer needs, creating proposals, and presenting technical solutions.

Application Engineering - Recommend and design HVAC solutions based on client specifications, ensuring technical feasibility and cost-effectiveness.

Customer Engagement - Build strong relationships with both existing and potential clients, listening to their needs and maintaining high levels of customer satisfaction.

Project Coordination - Work with internal teams and suppliers to ensure projects are executed smoothly and solutions meet customer expectations.

Documentation & Reporting: Keep accurate records, including proposals, technical specifications, project timelines, and sales reports.

Market Insights: Stay informed on industry trends and competitor products to offer innovative solutions that keep us competitive.

Participate in post-project reviews to evaluate project performance, gather feedback, and identify opportunities for process improvement and innovation.

Conduct training sessions for internal teams, contractors, and clients on product application, installation best practices, and maintenance procedures to enhance project outcomes and client satisfaction.

Any other ad hoc tasks assigned by supervisor.

Qualifications:

Diploma in Mechanical or Electrical Engineering and above

Minimum of 1-2 years in sales or application engineering within the HVAC industry (fresh graduates with relevant internships are also welcome to apply)

Relevant certifications in HVAC, refrigeration, and electrical systems are a plus.

Able to work independently, proactive, and focused on meeting and exceeding sales targets.

Clear verbal and written communication skills, with the ability to explain technical details to customers.

Additional Requirements:

Ability to work flexible hours and respond to emergencies as needed.

Physical capability to perform inspections and repairs in various environments.

Ability to multitask and prioritize tasks effectively.

Attention to detail and problem-solving skills.​​​​​​​​​​​​​​

Benefits:

Competitive salary with performance-based bonuses

Opportunities for professional growth and training

Collaborative and supportive work culture

Health and wellness benefits

Working Conditions:

Immediate Full-time position, typically Monday to Friday, with standard office hours

How to Apply:

If you’re passion for HVAC and a customer-focused approach, we’d love to hear from you!

Please apply via [email protected] with your updated resume and a cover letter detailing your interest and relevant experience.

Job Description

Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget

Perform site planning, coordination and inspection that related to M&E and facilities

Responsible in preparing tender specification & post contract and renovation projects

Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

Ensure accurate records and progress reports is prepared on timely manner

Ensure proper arrangement of site organization and workforce management

Conduct regular meetings with FM teams, clients, consultants and subcontractors

Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

Ensure the operation teams comply with client & regulatory requirements.

Any other ad-hoc duties as assigned

Requirements

Experience in related ACMV, and Electrical or equivalent.

Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

Possess strong analytical and organizational skills with the ability to work independently

Proficiency in MS Office.

Ability to work under pressure in a complex environment.

Job Responsibilities:

• Responsible for the overall daily operations of Building Engineering that includes PSI, PFI and SLA.
• Liaison with clients or ground agencies for on-site inspection works.
• Collaborate with client on new project and prepare cost estimations for tenders or quotations.
• Strategize PSI, PFI, and SLA work schedules, as well as manage manpower and resource allocation.
• Carry out structure inspections to existing building structure or infrastructure to identify defects and repair when required.
• Review, plan and coordinates the operations of a field inspection section and manages inspection projects.
• Provide visionary, leadership and direction within the team.
• Manage quotations processes, filing and follow up on billing payments and invoicing related to Building Inspection.
• Review reports prepared by Engineers/Inspectors/subcontractors, ensuring timely submission within set deadlines.
• Monitor the progress of work for each project and ensure timely submission of progress payment claims to clients on a regular basis.
• Enforce adopted codes and regulations pertaining to building inspections to ensure safety and compliance.
• Stay updated on new rules, regulations and technical information disseminated through internal communication channels.
• Supervises Building Inspectors/Engineers and Sub-Contractors, including task prioritization, expenses management, leave scheduling, performance evaluations, training and recommendation on hiring, termination, and disciplinary actions.

Job Requirements

• Bachelor’s degree in civil engineering
• Minimum of 5 years of relevant work experience, with at least 2 years in a management role
• Strong leadership, communication, and organizational skills
• Proficiency in project management and inspection processes
• Knowledge of building code and regulations

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Manufacturing Engineering Technician with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Responsibilities:

1. Provide technical support to manufacturing operations, including equipment setup, troubleshooting, and maintenance to ensure smooth production processes.
2. Assist in the development and optimization of manufacturing processes, collaborating with engineers and other team members to implement improvements and innovations.
3. Conduct routine inspections and tests on manufacturing equipment and systems to ensure compliance with regulatory standards and quality requirements.
4. Participate in the validation and qualification of manufacturing processes and equipment, documenting procedures and results according to regulatory guidelines.
5. Support continuous improvement initiatives by analyzing data, identifying opportunities for efficiency gains and waste reduction, and implementing corrective actions.
6. Adhere to Good Manufacturing Practices , Standard Operating Procedures, and safety protocols to maintain a safe and compliant work environment.
7. Collaborate with cross-functional teams, including production, quality assurance, and regulatory affairs, to resolve issues and achieve production goals.
8. Provide training and guidance to production personnel on new processes, equipment, and procedures to ensure effective implementation and adherence to standards.

Qualifications:

• Associate degree or technical certification in engineering, pharmaceutical sciences, or a related field; Bachelor's degree preferred.
• Prior experience in pharmaceutical manufacturing or a regulated industry is a plus.
• Strong mechanical aptitude and hands-on experience with manufacturing equipment and instrumentation.
• Knowledge of Good manufacturing practices regulations, and industry best practices for pharmaceutical manufacturing.
• Excellent problem-solving skills and attention to detail, with the ability to analyze data and troubleshoot technical issues effectively.
• Strong communication and interpersonal skills, with the ability to collaborate effectively in a team environment.
• Ability to work independently, prioritize tasks, and adapt to changing priorities in a fast-paced environment.
• Willingness to work flexible hours, including weekends and holidays, as needed to support manufacturing operations.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

Job Responsibilities:

• Drafting out MEMO, newsletters, articles and reports in English and Chinese language
• Support Department and Company on operational matters at corporate level
• Manage office equipment and stationery procurement
• Arrangement of flights, visas letters and hotel reservations for overseas travellers
• Coordinate company’s logistics matters for various stakeholders
• Facilitate submission of operations-related reports to Singapore and China HQ
• Manage corporate entertainment and office general operation

Job Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in any field
• Required skills: MS Office, MS Word
• At least 3 years of working experience in the related field is required for this position.
• Preferably Junior Executives specializing in Clerical/Administrative Support or equivalent