Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for highly talented and motivated candidates to work on developing new functional materials. Candidate must be able to work in a fast-paced and dynamic environment with researchers across different disciplines. Candidate should have experience in sensing materials or self-healing materials.

Qualifications

Bachelor or above degree in Material Sciences, Electrical/Electronics, Applied sciences, basic sciences, technology, mechanical engineering or other relevant fields. Experience with data analytics/AI models a plus.

MODEC is the largest independent operator of FPSOs in the world. We are the global leader with more than 50 years of experience in building and operating floating solutions for the offshore oil and gas industry. We operate in over 15 countries and have professionals of diverse nationalities in our team.

ROLE PURPOSE

Applies Project knowledge, Engineering knowledge and experience to coordinate the engineering and design of a project and support the fabrication, installation, commissioning and start up of Hull and Marine facilities and equipment/ utilities interface associated with the conversion and outfitting of FSO / FPSO. The incumbent shall be capable of deputizing for Marine Engineering Manager whenever required.

KEY ACCOUNTABILITIES

Marine Engineering Coordination: To Coordinate the multi-disciplinary engineering and design activities for Hull and Marine facilities of FPSO project. Shall participate in Project, Engineering and Supplier Kick off meetings.

Engineering Setup: Coordinate with the engineering disciplines to set up Engineering and Design systems, Engineering Schedule, Master document Register (MDR), Procurement Schedule

Engineering Deliverables; Coordinate with the engineering disciplines to issue all deliverables as per schedule. Shall approve calculations, RFQs and Technical Bid Analsis if authorized by the Marine Engineering Manager. Shall be capable of contributing in defining design concepts during initial phase of the project considering HSE, constructability , operability and maintainability.

Engineering Schedule; Develop Level 3 and Level 4 (MDR) schedules of Marine engineering. The incumbent shall support the Marine Engineerign Manager in maanging schedule and the targets of the project as required.

Management of Changes; Implement engineering change management for the Hull and Marine engineering post design freeze in all disciplines including communication, tracking and approval by the relevant stakeholders

Engineering Interfaces; Coordinate with Engineering disciplines to respond and closeout of Class Society comments, Client Technical Queries, Site Queries and Operation Queries for Hull and Marine

Subcontractor Management; Coordinate with the Ship Yard Engineering subcontractors and Third Party specialists for Hull and Marine facilities.

Engineering Resources; Support Marine Engineering Manager in forecasting and mobilizing engineering and design resources for Marine Engineering

Compliance; Ensure compliance with Company’s Standards and Procedures with specific attention to change management and deviation approval process

Problem Solving; Independently develops solutions to non-recurring problems by analyzing, interpreting and evaluating various precedents and data.

Health, Safety and Quality; Identify and integrate Safety, Quality requirements in the Design to ensure safe operability and maintainabilityEngineering ReviewsSupport Marine Engineering Manager in conducting Risk Assessment and various Design ReviewsDecision MakingIncumbent needs to be make timely engineering decision in case multiple valid solutions to challenges are generated, based on sound engineering practice and project objectives. Shall be capable of working independently to meet project objectives with little or no guidance from the project management or corporate maangement.

Marine Enginering knowledge; To be adequately familiar with the key activities and needs of all the engineering disciplines in Marine Engineering and how these activities interact and are sequenced, and the implications is a major challenge

Dispute Resolution; To be able to deal efficiently, professionally and tactfully with numerous stakeholders who may have different focus and priorities, both internal and external is a challenge

Risk Assessment; Support Engineering Manager and project management in review, risk assessment, and close-out of engineering issues

QUALIFICATIONS

Bachelor's Degree in Engineering with minimum 15 years experience or Masters Degree in Engineering with minimum 12 years experience.
Specialist knowledge of at least one FPSO .
Working knowledge of competing and alternative technologies.
Have adequate knowledge of design codes and regulatory requirements.
Familiar in use of Software, Database systems related to Engineering functions
Familiar with key key activities and needs of all engineering disciplines and how these activities interact and are sequenced.

Job Title: Recruiter

Job Description:

As a Recruiter, you will play a vital role in our talent acquisition efforts, including:

• Sourcing and screening candidates.
• Conducting interviews and assessments.
• Managing candidate pipelines.
• Collaborating with hiring managers.
• Ensuring a positive candidate experience.
• Contributing to recruitment strategies.

Qualifications:

• Proven recruiting experience.
• Strong communication and interpersonal skills.
• Excellent organizational and time management abilities.
• Proficiency in recruitment software/tools is a plus.
• Passion for finding top talent.

Why Join Us:

• Competitive compensation and benefits.
• Opportunities for professional growth.
• Collaborative and innovative work environment.
• Impactful role in shaping our team.

How to Apply:

If you're passionate about connecting talent with opportunity, send your resume and a brief cover letter to [[email protected]].

Job Description:

• Assist in recruitment activities, including job postings, screening resumes, and conducting interviews.
• Coordinate employee onboarding and offboarding processes, ensuring a smooth transition for new hires and departures.
• Maintain employee records and HR databases, ensuring accuracy and confidentiality.
• Support in the implementation of HR policies and procedures in line with labor laws and company guidelines.
• Assist in organizing training programs and employee engagement initiatives.
• Handle employee inquiries and provide guidance on HR-related matters.
• Collaborate with other departments to facilitate effective cross-functional initiatives.

Qualifications:

• Bachelor's degree in Human Resources Management or related field.
• 3 years of experience in HR roles, demonstrating a strong grasp of HR practices and procedures.
• Proficiency in HR software and MS Office applications.
• Excellent communication skills, both written and verbal.
• Strong organizational abilities with attention to detail.
• Ability to maintain confidentiality and handle sensitive information with discretion.

Why Join Us:

· Competitive compensation and benefits.

· Opportunities for professional growth.

· Supportive work environment.

· Be a vital part of our HR team.

How to Apply:

If you're an organized individual with a passion for HR admin, send your resume and cover letter to [[email protected]].

The Qualifications:

• A diploma in Mechanical & Electrical or equivalent qualification.
• Mechanical & Electrical Coordination certificate from BCA
• A relevant Advanced Certificate / Higher NITEC / Advanced NBQ with 2 to 3 years of relevant work experience.
• A relevant certificate with 4 to 5 years of relevant work experience.
• NITEC / Higher NBQ with at least 5 years of relevant work experience12.

Duties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

Join Our Growing Team!

As Skylink Group Holdings continues to expand, we're looking for passionate and talented individuals to join our journey. Our success has opened up exciting new roles across various departments, offering a wealth of opportunities for professional growth. At Skylink Group Holdings, you'll not only be a part of our success story but also a culture that values innovation, teamwork, and work-life balance. We offer a dynamic working environment, competitive benefits, and a chance to work with some of the brightest minds in the industry. Be a part of Skylink Group Holdings where your journey to excellence begins.

Job Description

• Dealing with all range and multi brand of vehicles with regards to sales activities
• Acquire sales with new and existing clients to meet targeted sales objectives
• Identify/Build/Expand new client base to achieve sales opportunities
• Purchase all types of pre-owned vehicles for inventory replenishment
• Follow-up/Develop sales lead to achieve monthly sales target
• Attend to sales inquiries
• Resolve customer’s complaint/issue when arises
• Follow-up on prompt payment
• Maintain a proactive relationship with existing/new customers
• Arrange for regular meetings with Clients
• Develop relationships for both new and existing customers
• Submit report on weekly and monthly sales activities

Requirements:

• Minimum 1-2 years of experience in sales
• Bilingual in English and Mandarin as need to communicate and liaise with Chinese speaking customers on contracts
• Good interpersonal and communication skills (both in spoken and written)
• Resilience, resourceful and goal oriented
• Possess driving license Class 3 and above
• Positive mindset and willing to learn attitude
• Good team player, KPI driven and self motivated
• Experience in automotive industry would be an added advantage

Benefits:

- Basic + Well structured commission scheme

- Medical, dental & Insurance coverage

- Work Life Balance

Job descriptions:

· Propose formwork system solutions and make design drawings for clients.

· Design calculations and structural analysis.

· Coordinate with different stakeholders to meet their demands.

· Ensure work is designed with available inventory and in conformance with contractual obligations.

· Establish comprehensive material list.

Requirements:

· Minimum Diploma in Civil engineer or related major.

· Minimum 1 year relevant working experience in the construction or related sector.

· Our company is engaged in formwork systems designing, experience in designing formwork systems will be an advantage.

· The position needs to communicate with the director who is Mandarin Speaker, proficiency in Mandarin is required.

· Good at Microsoft Office, AutoCAD and Tekla Tedds.

· Team player and positive attitude to learning.

· Able to work well under pressure and tight deadlines.

Join Our Growing Team!

As Skylink Group Holdings continues to expand, we're looking for passionate and talented individuals to join our journey. Our success has opened exciting new roles across various departments, offering a wealth of opportunities for professional growth. At Skylink Group Holdings, you'll not only be a part of our success story but also a culture that values innovation, teamwork, and work-life balance. We offer a dynamic working environment, competitive benefits, and a chance to work with some of the brightest minds in the industry. Be a part of Skylink Group Holdings where your journey to excellence begins.

The Job

• Greeting customers at the front desk and providing exceptional service, including offering general information, redirecting customers, addressing compliments and complaints, and ensuring a positive customer experience.
• Serving as the point of contact for sales hotlines and inquiries, efficiently addressing customer queries and providing information.
• Demonstrating meticulous attention to detail when handling customer data.
• Managing and distributing sales leads in accordance with company standards.
• Proficiency in using Customer Relationship Management (CRM) systems to maintain customer records and interactions.
• Developing a comprehensive understanding of the automotive market and products to effectively assist customers.
• Generating monthly sales lead reports by collecting and analyzing customer information to identify trends and opportunities.
• Reporting to the Marketing Manager and providing support to the marketing team when needed.
• Handling adhoc administrative duties as required to ensure smooth operations.

Requirements

• Minimum of a Diploma or equivalent qualification.
• Bilingual proficiency in English and Mandarin to effectively communicate with a diverse customer base.
• Strong customer service skills, both verbal and listening, to address customer needs and concerns effectively.
• Ability to adapt and respond effectively to various situations and customer demands.
• Excellent communication and presentation skills to convey information clearly and persuasively.
• Strong multitasking abilities, prioritization skills, and effective time management to handle multiple tasks efficiently.
• Candidates with prior experience in customer service and/or call center roles will be advantageous.
• 6-days workweek (Mon-Sat: 8.30am to 6.00pm)

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

The Qualifications:

• A diploma in Mechanical & Electrical or equivalent qualification.
• Mechanical & Electrical Coordination certificate from BCA
• A relevant Advanced Certificate / Higher NITEC / Advanced NBQ with 2 to 3 years of relevant work experience.
• A relevant certificate with 4 to 5 years of relevant work experience.
• NITEC / Higher NBQ with at least 5 years of relevant work experience12.

Duties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

MODEC is looking for an FPSO Engineering Manager to be based with us here in Singapore.

Qualifications

- Bachelors Degree in Engineering with 20+ years of experience

- Experience in FPSO Engineering Mgmt for at least 1 FPSO

- Knowledge of interfaces between Topside & Marine Engineering, facilities/systems of FPSO and working of all process, mechanical, piping, structure, electrical & telecom, instrumentation & marine engineering.

- Familiar with the use of Software, Database systems related to Engineering functions

- Understanding and interpretation of total project life cycle cost and benefits as well as their implications during FEED and EPCI phases of projects.

- Adequate knowledge of design codes and regulator requirements within an EPCI project.

Accountabilities

- Engineering Management – Manage the engineering & design of both topside and marine facilities of an FPSO project

- Leadership – Provide leadership to the topsides and marine engineering team and be the single focal point both internally and externally for all issues related to FPSO engineering.

- Management of changes – Supervise implementation of engineering change management post design freeze are compiled with, communicated, tracked and approved by the relevant stakeholders

- People Management – Motive the team to perform, provide performance feedback, forecast and manage engineering resources on the project

- Compliance – Conduct internal engineering team meetings, lead engineering meetings with the client and other external agencies, prepare minutes of meetings, progress reports, participate in meetings with the client and communicate clearly.

- Engineering Resources – Lead in forecasting and mobilizing engineering and design resources for the over engineering team in the project

- Engineering Reviews – Ensure all applicable engineering reviews of the project for both topsides and marine are planned, conducted, and closed out in a timely manner.

- To be adequately familiar with the key activities and needs of all the engineering disciplines in Topsides and Marine Engineering, and how these activities interact and are sequenced, and their implications.

1. Perform administration tasks such as issuing of Quotation, PO, DO & Invoice, leave recording etc.

2. Prepare inspection report/ NCR report

3. Hardcopy documents filing

4. Maintain ISO filing system

5. Sending and replying incoming emails and answering / replying phone calls of customers

6. Any other tasks as assigned

Interested? Please send your resume to

[email protected]

COMPANY DESCRIPTION

Mediacorp is Singapore’s largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

The Senior Engineer will be providing technical services to support the design, implementation, and ongoing support of IP-based media solutions within the broadcast infrastructure. Ensuring successful integration, maintenance & support of IP technologies for the production, management, and distribution of media content in the broadcast environment.

The role involves assisting of projects execution that involve multiple stakeholders and vendors. The individual contributes to the upkeep of IP-based media broadcast systems and infrastructure, doing preventive maintenance for broadcast-related equipment and infrastructure. The individual should be able to perform the plans, demonstrating the ability to efficiently manage multiple tasks and engage with various stakeholders. Collaborating with diverse teams to implement and maintain the broadcast media production workflow.

Responsibilities

• Assist with the implementation of IP-based media systems, ensuring scalability, flexibility, and adherence to industry standards.
• Collaborate with cross-functional teams to integrate IP technologies into existing and/or new broadcast systems & infrastructure.
• Perform cyber security management within the broadcast network in accordance with organisation policies.
• Assist with integrating IP-based solutions for media production, including video-over-IP, audio-over-IP and associated control protocols.
• Testing of system to validate the performance, reliability, and quality of broadcast systems.
• Adapting and migrating from traditional broadcast systems to IP-based solution. Minimising downtime and disruptions.
• Troubleshoot faults and implement solutions to minimise downtime.
• Perform repairs on broadcast system & equipment.

• Diploma/Degree in Electronic & Electrical Engineering or Information Engineering & Media or Computer Engineering from a recognised tertiary institution.
• 3 to 5 years of relevant experience in the media industries.
• Hands-on Engineer with interest in broadcast engineering
• Knowledge in IT computer networking and cybersecurity
• Analytical and troubleshooting skill to support broadcast IT systems
• Proficient in written and communication skills
• A team player who is able to work independently and is prepared to perform shift duties, late night works and standby support for key events

Assist in creating quality inspection reports

Assist in creating job routings

Assist in creating Delivery Order and invoices

Assist in production and quality documentation

knowledge in microsoft office

knowledge in using measuring instruments, dial caliper micrometer...

knowledge in CMM is an advantage

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

• Perovskite Solar Cells
• Electrochromic window
• Neuromorphic Computing
• Nanomaterials Synthesis
• Mentor PhD students
• Draft grant proposals
• Oversee lab safety

Job Requirements

• PhD degree in chemistry, materials science and engineering, electric and computer engineering, or chemical engineering.
• Ample research experience in synthesis of nanomaterials and nanocomposites, perovskite solar cells, smart windows, neurocomputing
• Solid background/experience in materials for optoelectronics and memristors.
• Excellent communication and writing skills
• Strong publication record
• Prior undergraduate and master students mentoring experience

Responsibility:

• To work closely with SQS in supervising and managing QS’ performance
• To prepare project costing
• To prepare and issue sub-contract to sub-contractor/ supplier
• To manage Project Change Request (PCR) for addition/omission of project funding
• Regular reporting of project account status, including costing, outstanding payment & etc
• Identify, analyze and evaluate problems encountered by QS / SQS and propose the effective solution approach

Requirements:

• Degree in Quantity Surveying, Construction Management or equivalent
• Excellent analytical, interpersonal and communication
• Ability to work with tight deadlines
• Independent and a good team player
• A dynamic, positive and forward thinking personality will be essential
• At least 8 years’ relevant experience

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

~ Support HSSEQ department in ensuring ship operations are in compliance with internal company procedure

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

~ Support HSSEQ department in ensuring ship operations are in compliance with internal company procedure

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

-Reporting directly to the manager and fulfilling the Manager's duties in their absence.

-Being well-versed in internal operations.

-Taking minutes at meetings.

-Forwarding and distributing mail as required.

-Preparing and filing relevant documents.

-Supporting managers in devising plans in order to improve business performance.

-Monitoring various operational aspects.

-Collaborating with the logistics office.

-Assigning tasks to employees and hiring new staff.

-Providing training, instruction, and guidance to subordinate employees to ensure their knowledge of company products, fabrication and assembly methods, management skills, and the effective use of accepted work processes and standards.

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.