• Install, maintain, and repair electrical wiring, equipment, and fixtures.
• Ensure compliance with electrical codes and safety standards.
• Read and interpret blueprints, schematics, and technical drawings.
• Test electrical systems and continuity of circuits using testing devices.
• Inspect electrical systems, equipment, and components to identify hazards and defects.
• Maintain accurate records of maintenance and repair work.
• Collaborate with other maintenance staff and departments.
• Provide emergency repairs and support as needed.
• Stay current with industry standards and technological advancements.
• Assist in the development and implementation of maintenance procedures.
• Train and mentor junior technicians.
• Participate in safety training and adhere to safety protocols.
• Troubleshooting and repairing malfunctioning equipment, appliances, and apparatus.
• Constructing and fabricating parts, using hand tools and specifications.
• Reading and interpreting electrical and electronic circuit blueprints, diagrams, and schematics.
• Advising management on continued use of unsuitable equipment, appliances, and apparatus.
• Supervising electricians.

Roles & Responsibilities

The Quantity Surveyor reports to the Senior Quantity Surveyor and assists in all costs and contractual issues in Main Contract as well as Sub-Contracts connected to the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Ensure accurate measurement of quantities to assist in the preparation of progress payment claims, variation order claims and payments to subcontractors and suppliers including all final accounts.
• Involve in preparing regular cost reports including maintenance budget cost controls.
• Assist in maintaining good documentation of events at site for variation order / EOT claims.
• To work closely with the site storemen to ensure proper documentation of materials control.
• Be familiar with the specifications and scope of works at various stages of the project so as to be able to advise the structural, architectural and M&E coordinators on the contracted design requirements.
• Assist in the procurement of sub-contractors and suppliers of specified materials.
• Attend technical meetings to keep abreast of design development issues and provide cost escalation alerts.
• Learn and be adequately briefed on the contractual / legal rights of the Main Contractor in order to advise colleagues at site and the management on any choke points during the project.
• Adherence to safety practices in the workplace.

Value Add of Position

• Help the project’s bottom line by rigorously monitoring and implementing cost controls.
• Establish a good relationship with Client, Consultants and subcontractors to ensure that the project is smoothly managed in terms of resources and timeline.

Qualifications and Education Requirements

• Education: Degree/Diploma in Quantity Surveying, Building or Civil Engineering
• Experience: Minimum 3 year of working experience in tendering, estimating and measurement of quantities in civil projects
• Good analytical skills

JOB DESCRIPTION:

Division: Regional Product Marketing

Reports to: Regional Product Marketing Division General Manager

Functional Relationships with:

ASEAN and India Sales Team; Communicate and collaborate with Japan HQ and Oversea technical affiliate for products’ promotion, technical support / troubleshooting, and new technical feasibility collaboration, and creation.

Position Profile:
The Application Engineering Manager is responsible to support the General Manager for developing and executing engineering solution services for overall business plan and strategic direction of the organization, specifically in the areas of engineering solution mid-term strategy, new market exploration and creation & business generation. He/she offers strategic leadership by articulating in depth technical feasibility knowledge and proposals (including both hardware, software and system) to develop solutions for customer and explore new market. Additionally, he is required to collaborate with various functional group in Japan HQ and other regional-HQ to synergize business creation initiatives.

Key Duties & Responsibilities:

• Develop Application Engineering services’ strategies & policy to support the achievement of the overall business objectives for ASEAN + India region.

• Synergize the product policy and strategy alignment with various functional group (HQ and other RMC) for targeted business segments’ opportunities creation.

• Lead application engineering activities for ASEAN region and enhance business wins though value creation and technical consulting service.

• Accelerate of immediate business opportunities.

• Technical support for connectivity module (embedded engineering)

• Product feature & demo tools development

• Conceptualize and facilitate the integration of Murata’s products (connectivity, sensor, etc) into solution and proposal for customer.

• Identify the local unique requirement & business opportunity through tech application marketing.

• Support engineering requirement (S/W, system, and H/W) into additional solution.

• Provide technical feasibility & perspective for possible Layer 3 business in ASEAN region.

• Support the product/business case development process through total Murata’s qualification and approval compliance, including all phases of evaluation, PoC, DR and QC/QA into mass production.

ABILITY/COMPETENCY REQUIRED

· Master degree in Electronic Engineering or related field preferred.

· A minimum of 15 years of working experience in regional / global embedded engineering environment & electronic industries.

· Proven records of product/system development project with connectivity’s technologies.

· Strong proficiency in embedded electronics, S/W and development platform of various micro-controller.

· Excellent verbal, written communication, and presentation skills.

· Deep understanding of market trends and development experience.

· Excellent interpersonal and conflict resolution skills.

· Excellent organizational and leadership skills.

· Strong analytical and problem-solving skills.

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

As an Operations Central Team Senior Engineer, Spares Engineering, you will be a member of the worldwide front end manufacturing team responsible for driving improvement with spare part management. This position is dependent on partnership with Central Process Equipment Engineering, Process and Equipment Engineering, Cost Teams, Global Procurement, Global Quality, and other business partners to achieve Micron’s strategic objective and goals.

Responsibilities :

• Lead/Support the spare management improvement activities with multi-functional groups such as Technology Development, Manufacturing, Global Procurement and internal Operation Central Team to meet Global Operation’s Strategies Programs - Cost/Scale/Quality/Cycle Time (Speed) goal
• Provide technical consulting and hands-on assistance to Fab area teams to create and/or identify the best solutions, solve existing solutions, and deploy new solutions.
• Promote worldwide sharing and transfer of area-specific domain knowledge
• Lead or drive standardization between sites regarding spare management issue, reports, and systems through the System Workforce Allocation Team (SWAT) or other appropriate means.
• Monitor and communicate progress to collaborators
• Maintain program support through interaction with senior leaders
• Improve Spares performance thru supplier engagement, and design & customize parts thru partnership with spares supplier
• Lead spares quality project management to improve spares quality performance

Qualifications Requirements:

• Good communication skills
• Bachelor's degree in engineering
• Minimum of 5 years experience in equipment engineering at a semiconductor company
• Dry-etch experience preferred, but open to other process areas as well
• Wafer manufacturing spares cost management experience preferred
• Project management experience preferred
• Spares quality related experience preferred
• Open to business travel based on business needs.

Job Profile(s):

FAB Engineer 3 - FAB Engineer 5

Relocation level: (TBD)

Keysight is the world's leading electronic measurement company, helping scientists and engineers address their toughest technical challenges with confidence through innovations in wireless, modular, and software solutions. Our employees leverage their insight and passion to deliver measurement solutions in wireless communications, aerospace and defense, and semiconductor markets with world-class platforms, software and consistent measurement science. This job will be part of the Communications Solutions Group, which is responsible for Keysight's portfolio in the Wireless Data Ecosystem, including wireless devices, operators, internet infrastructure, and Aerospace & Defense. Our software-centric solutions accelerate our customers' time to market and reduce their costs - giving them a competitive advantage in today's and tomorrow's technology waves.

Job Description

This position is for a full-time Software Engineer to join Keysight’s Quantum Engineering Solutions (QES) organization, which is responsible for producing world-leading solutions in quantum technologies, including quantum computing, quantum communications and quantum sensing. As a Solution Developer, you will be part of an R&D team and launch breakthrough software solutions to market. You will engage in every stage of our product development process, addressing intricate technical challenges in a customer-centric environment. Your role will focus on integrating open-source quantum computing software with quantum control systems, ensuring seamless execution of workflows in HPC and cloud environments. You will design and implement scalable cloud-based solutions for quantum workloads, collaborate with cross-functional teams to develop integration tools, and optimize HPC workflows for distributed quantum computing operations.

Job Responsibilities

• Integrate open-source quantum computing software with quantum control systems to enable seamless execution of experiments and workflows in cloud environments.
• Design and implement scalable cloud-based solutions for quantum computing workloads, ensuring high performance and efficient resource utilization.
• Collaborate with cross-functional teams to develop APIs, libraries, and tools that enhance the integration of quantum software and control systems.
• Work closely with technology teams in an Agile environment to integrate cloud services and optimize operational efficiency.
• Ensure best practices in cloud operations, establish key performance indicators, and develop and enforce cloud security and compliance measures.

Job Qualifications

• BS/MS in Computer Science, Computer Engineering, or equivalent.
• Over 5 years of experience, including leading cloud platforms in public cloud environments.
• Strong experience with High Performance Computing (HPC) and cloud platforms, including deploying and optimizing distributed computing workflows for high-performance applications.
• Proficiency in Python, C#, C++, JavaScript, and other modern programming languages (e.g., Golang, Julia).
• Experience in integrating complex software systems, including APIs, libraries, and tools, with a focus on performance, scalability, and reliability.
• Proven experience as a Cloud Engineer.
• Good knowledge of DevOps practices.
• Familiarity with cloud security, compliance, and cost management.
• Good understanding of quantum information science is desired but not mandatory.
• Excellent analytical and troubleshooting skills.
• Ability to work in a collaborative environment and to develop teamwork among individuals and over geographically disperse teams.
• High tolerance for ambiguity, results-oriented, meets timelines, handles pressure while working positively in a collaborative manner.
• Excellent written and verbal communication skills
• Willingness to learn proactively.

Keysight is the world's leading electronic measurement company, helping scientists and engineers address their toughest technical challenges with confidence through innovations in wireless, modular, and software solutions. Our employees leverage their insight and passion to deliver measurement solutions in wireless communications, aerospace and defense, and semiconductor markets with world-class platforms, software and consistent measurement science. This job will be part of the Communications Solutions Group, which is responsible for Keysight's portfolio in the Wireless Data Ecosystem, including wireless devices, operators, internet infrastructure, and Aerospace & Defense. Our software-centric solutions accelerate our customers' time to market and reduce their costs - giving them a competitive advantage in today's and tomorrow's technology waves.

Job Description

This position is for a full-time Project Manager to join Keysight’s Quantum Engineering Solutions (QES) organization, which is responsible for producing world-leading solutions in quantum technologies, including quantum computing, quantum communications and quantum sensing. The ideal candidate will be responsible for tracking project deadlines, managing delivery schedules, and leading a team of talented engineers and researchers. While a deep understanding of quantum computing is not required, some familiarity with the field is beneficial. Experience in HPC (High-Performance Computing), data science projects cloud computing, and managing open-source projects will be highly preferred.

Job Responsibilities

• Oversee and manage the lifecycle of projects, ensuring timely delivery and alignment with project goals.
• Track project milestones, deadlines, and deliverables, adjusting plans as necessary to meet objectives.
• Lead and motivate a multidisciplinary team, fostering collaboration and effective communication across all project stages.
• Collaborate with technical leads to ensure project scope and objectives are aligned with organizational goals.
• Coordinate with stakeholders, providing regular updates on project status and addressing any risks or issues that may arise.
• Ensure proper documentation and reporting for all project phases.

Job Qualifications

• BS/MS in Computer Science, Computer Engineering, Management or equivalent.
• Over 10 years of experience in project management, preferably in a technical or scientific environment.
• Basic understanding of software engineering.
• Experience managing HPC, data science, and cloud computing projects is strongly preferred.
• Experience managing open-source projects is a plus.
• Good understanding of quantum information science is desired but not mandatory.
• Excellent analytical and troubleshooting skills.
• Ability to work in a collaborative environment and to develop teamwork among individuals and over geographically disperse teams.
• High tolerance for ambiguity, results-oriented, meets timelines, handles pressure while working positively in a collaborative manner.
• Excellent written and verbal communication skills
• Willingness to learn proactively.

Preventive and corrective maintenance of Building Management System, Energy management System

· Development of Functional Design Specifications, Software Design Specifications, Control Schematics/Write-up and other software/test documentation.

· Handle application programme change management, hardware deployment management & documentation

· Implantation of PLC/SCADA project from concept to design and programming

· Site Testing and Commissioning with clients.

· Interface design, implementation and testing between various third-party systems

· Meeting with clients, reports and documentation

· Capable of performing troubleshooting independently

· Implement improvement works to clients.

Requirement:

· Diploma or Degree in Engineering (Electrical/ Electronics/ Automation / Building Technology).

· Experience in interfacing design, implementation and testing between various third-party systems using Modbus, BACNet or other protocols will be an advantage.

· 2 years’ working experience in building ACMV systems / PLC relaated experience

· Must have Mitsubishi PLC programming experience

· Knowledge of SCADA (Niagara N4 or Mitsubishi MC Works) is an advantage

· Have worked with Building Management System/SCADA/HVAC system is an advantage.

· A resourceful individual with good organisation, time management and problem-solving skills.

· A team player and at the same time able to work independently in a fast-paced environment.

· Able to work during weekends or night jobs occasionally when required.

Competitive remuneration package will be offered to the shortlisted candidate.
Interested applicants, please state your last drawn and expected salaries, notice period and reason for leaving last employment and email to [email protected] in MS Words format for processing.

Roles & Responsibilities :· Design Electrical Control Panel, DDC Panel and Control systems forbuilding service· Prepare Single line Diagram, termination diagram,· Generate the Bill of material, prepare costing/quotation for electricalproject.· Understand Software PLC Programming, Testing and support SiteInstallations· Review the vendor specification and co-ordinate with vendors,· Liaise with client, consultant, contractor, provide the technical support aswhen require.· To co-ordinate meetings and daily briefings at site.· Project management, implementation and supervision,· Prepare Electrical Project Documentation for Customer Requirements.RequirementsDegree/ Diploma in Electrical Engineering.Minimum 1 years of experience in the electrical engineering field.Independent, self-motivated, results-driven and teamworking skills.Good hand-on experience on applications such as Microsoft Office, autoCAD, Electrical design software, etc.Interested applicants, please include the info as follow in your updated CV and email to [email protected] for leavingLast drawn salaryExpected salaryAvailability/Notice periodA recent photoWe regret that only short listed candidates will be notified.

Job Description:

The Project/Site Engineer will assist in the supervision and coordination of Electrical & Control systems for construction projects. The role involves monitoring project progress, managing resources, and ensuring quality standards are met. The engineer will work closely with internal teams, clients, subcontractors, and suppliers to ensure timely project execution and compliance with technical requirements.

Responsibilities:

• Supervise and assist in the execution of Electrical & Control system works on-site.
• Coordinate project planning, documentation, and execution.
• Monitor project progress, manpower mobilization, and material planning.
• Liaise with internal teams, clients, subcontractors, and suppliers to resolve issues.
• Conduct site inspections and ensure quality control.
• Manage the preparation and submission of method statements, shop drawings, and other required documentation.
• Report to the Project Manager (PM) or Construction Manager (CM).

Requirements:

• Diploma or Degree in Electrical Engineering or related field.
• 1-5 years of experience in construction projects.
• Strong communication skills and ability to collaborate across departments.
• Knowledge of project management processes.
• Experience in wafer fabs or pharmaceuticals is a plus.

We are looking for a Mechanical Engineerto assist in site supervision and coordination of ACMV systems for a construction project. Key duties include overseeing project execution, managing progress, coordinating with stakeholders, and ensuring quality control.

Responsibilities:

• Assist in ACMV system installation and commissioning.
• Coordinate project planning, materials, and manpower.
• Supervise subcontractors and monitor work progress.
• Conduct site inspections and ensure compliance with standards.
• Prepare reports and documentation as required.

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent.
• 1-5 years of relevant experience in construction projects (ACMV systems preferred).
• Good communication skills and project management knowledge.
• Experience in wafer fabs or pharmaceuticals is a plus.

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

This position focuses on strategy and modeling creation, improving global standardizations, enable sustainability through automation, synchronizing the processes and scaling the solutions to transform the inline interdiction and operation system automation for RAM Quality and Operation Engineering sections.

Responsibilities:

• Establish and improve BKM (Best Known Method) for RAM quality defense line, sampling methodology, sampling systems and operation efficiency.
• Improve quality and yield performance by reducing defect OOC% variation.
• Keen to learn new skills, initiate proactive and continuous improvement projects, in areas across the Front-End including manufacturing methods and processes, quality, software systems, cycle time, key tool metrics (utilization, and performance efficiency), maintenance and routine tasks, and other manufacturing support operation.
• Establish metrics that can efficiently audit adoption rate and compliance to business process, BKM and strategy and perform audits.
• Perform quality deviation investigations, fab metrics benchmarking analysis and find opportunity for improvements.
• Lead and facilitate discussion to drive network alignment on strategy business process and roadmap to achieve area objectives and deliver to timelines/commitments. Ensure BKM sharing spans across all sites regardless of technology and/or site mission differences.
• Actively provide recommendations to improve and optimize programs and processes to the respective program and/or process owners.
• Provide tactical support and coordination for the Fabs for issues of People, Safety, Yield, Quality, Cost, and Cycle Time when required.

Qualifications & Skills:

• Good communication skill, maintain a strong and open relationship with peer group and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management and present strategy and updates to network members and leaders.
• Proficient in project management with good resource planning, status monitoring and deliver timely results.
• Promote worldwide sharing and transfer of area-specific knowledge.
• Proficiency, experience, and knowledge relating to product and test wafer capacity modeling, wafer at risk modeling, Failure Mode Effect Analysis (FMEA) concept and system, defect analysis tools, sampling strategy and systems, Statistical Process Control (SPC) tools, Cycle Time Management, tableau creation, SQL and Programming language and Organizational Change have advantage.

Education and Experience:

• Masters/bachelor’s in engineering
• Relevant working experiences in RDA and/or Metrology
• Willing and capable of international travel, including Extended International Business Travel (EIBT) assignment to 6 months as needed, to accomplish the goals.

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Job Description:

• As a press brake operator, your job is to operate press brake machines to shape various types of metal
• Responsible for setting up, tool selection, operating of multi-axis CNC pressbrake/bending machine and input the programs as designed.
• Inspect blueprints for a project, set up your machine, perform regular maintenance, inspect metal while shaping it, and make adjustments as needed
• Maintain and manage machine as well as tooling cleanliness and in good physical shape
• Read tape measures and protractors, calipers, and other tools necessary to perform job
• Do other machine related tasks and other production jobs as and when required
• Maintain cleanlines of

Requirements:

· NITEC or any related field or related experience

· Computer literate, and familiar , solidworks , AutoCad ,

· Knowledge in the operation of CNC pressbrake machines like Amada, Bystronic Machine is an advantage

We are a well-established construction company with an enviable track record in major civil engineering and building works. To meet our continuing growth, we require suitably qualified candidates for the following position:

Responsibilities:

• Prepare tender and contract documents, including bills of quantities

• Able to do cost estimation independently and accurately

• Taking off quantity for tender

• Final account preparation

• Monthly progress claim

• Certification of sub-contract works

• Liaise with clients, architects, engineers, surveyors and sub-contractors

• All other related works

Requirements:

• Degree / Diploma in Quantity Surveying / Building or equivalent from a recognized University

• Min 2 - 4 years’ relevant experience

• Good working knowledge in Residential projects, Building & M & E

• Good knowledge of local rules and regulations

• Able to handle take-off, tender etc

• Only Singaporeans and PR

Seeking individual with expertise in contract management and project costing, who are keen to develop modern digital skillsets and knowledge for quantity survey, data management and analysis of MEP / HVAC / ACMV systems to compete in the current global trend of sustainability and green endeavors.

Scope:

1. Contract Management

a. Legal compliance

i. Alternate Dispute Resolution (ADR)

- Introduction and exposure to Adjudication, Arbitration and Contract negotiations.

ii. Extension of Time (EOT)

- Review contractual implications

- Differentiate EOT and liquidated damages (LD), assess considerations and resolutions.

iii. Collaborative Contracting

- Introduction to collaborative contracting processes.

b. Contract Agreement (Main Contract/Sub Contract)

- Ensure contract terms are reviewed and understood

- Verify all necessary approvals are obtained

- Maintain records of communication and modifications

- Safe keep of contract agreement in Google shared drive and eCabinet.

2. Project Costing

a. Software application

i. PDF X-change Editor

- For manual quantity take-off and check.

ii. Glodon Internation (TMEC/TBQ)

iii. Autodesk Revit/CAD

b. Procurement

i. Assist in procurement process and regular review for efficiency.

ii. Sourcing of Subcontractors/Suppliers for services/products

iii. Negotiation

iv. Price Analysis

c. Budgeting and Control

i. Project cost assessment

ii. Variation Order (VO) cost (Budgeted / Non-Budgeted)

- Process of managing variation orders

- VO cost assessment

3. Project Closure

a. Payment Certification

i. Security of Payment Act (SOPA)

ii. PSSCOC/SIA

b. Variation Order (VO)

i. Preparation / Submission of VO

ii. Assessment / Evaluation of VO

- Manage addition and omissions, instruction, changes in quantity/design/requirements.

- Assess and evaluate subcontractor VO

- Application of appropriate SOR

- Negotiation

c. Final Accounts

i. Defects Liability Period (DLP)

- Ensure contract responsibilities and due diligence are well delivered.

ii. VO finalization

- Conclude VO and negotiation to close.

iii. Back Charges

Requirements

• Diploma or Degree in Mechanical Engineering, Electrical Engineering , Sustainable Infrastructure in Building Services, Quantity Surveying or equivalent /
• Experience in MEP / HVAC / ACMV is added advantage
• Experience in Data Analysis concepts is added advantage
• Knowledge in modern digital solutions like modelling take off software, RPA, advanced Excel / Google Sheets skills, utilising AI / ML are added advantage.
• Strong literacy in English and willing to learn in a changing industry.
• Interested candidates with MEP / HVAC / ACMV field experience are welcomed to apply.
• Fresh graduates welcomed to apply, training will be provided.

Advantages Remunerations

• 5 day work week.
• Progression-centric
• AWS included
• Variable Performance Bonus
• Annual Incentive Trip
• Further learning/education encouraged and sponsorships
• Flexible working hours and Work from home accepted on top of physical attendance
• Various Medical Benefits

Seeking individual with keen interest to develop modern digital skillsets and knowledge for quantity survey, data management and analysis of MEP / HVAC / ACMV systems to compete in the current global trend of sustainability and green endeavors.

Scope

• Reporting: Reporting to QS Manager
• Objectives: Participate in tendering process and to successfully bid for projects
• Quantity Survey: Collect data for management and analysis of cost estimation, budgeting, contract administration and procurement. (Individual Scopes follows below)
• Cost Estimation and Budgeting: Develop comprehensive and strategic cost estimates for tenders and projects, taking into account project specifications, current market rates, and labor costs. Prepare and present these estimates, transforming data into actionable insights and deliverables that meet tendering requirements and enhance the likelihood of successful bidding.
• Contract Administration: Work with Contract Manager to prepare and review contract documents, tender documents, and bills of quantities in accordance with the Building and Construction Authority (BCA) guidelines and Singapore's regulatory framework, ensuring strict compliance across work done.
• Procurement Management: Coordinate with suppliers, contractors, and/or consultants for the procurement of materials, equipment, and services, ensuring optimal cost efficiency and quality control.

Requirements

• Diploma or Degree in Mechanical Engineering, Electrical Engineering , Sustainable Infrastructure in Building Services, Quantity Surveying or equivalent /
• Experience in MEP / HVAC / ACMV is added advantage
• Experience in Data Analysis concepts is added advantage
• Knowledge in modern digital solutions like modelling take off software, RPA, advanced Excel / Google Sheets skills, utilising AI / ML are added advantage.
• Strong literacy in English and willing to learn in a changing industry.
• Interested candidates with MEP / HVAC / ACMV field experience are welcomed to apply.
• Fresh graduates welcomed to apply, training will be provided.

Advantages Remunerations

• 5 day work week.
• Progression-centric
• AWS included
• Variable Performance Bonus
• Annual Incentive Trip
• Further learning/education encouraged and sponsorships
• Flexible working hours and Work from home accepted on top of physical attendance
• Various Medical Benefits

Seeking individual with keen interest to develop modern digital skillsets and knowledge for quantity survey, data management and analysis of MEP / HVAC / ACMV systems to compete in the current global trend of sustainability and green endeavors.

Scope

• Reporting: Reporting to QS Manager
• Objectives: Participate in tendering process and to successfully bid for projects
• Quantity Survey: Collect data for management and analysis of cost estimation, budgeting, contract administration and procurement. (Individual Scopes follows below)
• Cost Estimation and Budgeting: Develop comprehensive and strategic cost estimates for tenders and projects, taking into account project specifications, current market rates, and labor costs. Prepare and present these estimates, transforming data into actionable insights and deliverables that meet tendering requirements and enhance the likelihood of successful bidding.
• Contract Administration: Work with Contract Manager to prepare and review contract documents, tender documents, and bills of quantities in accordance with the Building and Construction Authority (BCA) guidelines and Singapore's regulatory framework, ensuring strict compliance across work done.
• Procurement Management: Coordinate with suppliers, contractors, and/or consultants for the procurement of materials, equipment, and services, ensuring optimal cost efficiency and quality control.

Requirements

• Diploma or Degree in Mechanical Engineering, Electrical Engineering , Sustainable Infrastructure in Building Services, Quantity Surveying or equivalent /
• Experience in MEP / HVAC / ACMV is added advantage
• Experience in Data Analysis concepts is added advantage
• Knowledge in modern digital solutions like modelling take off software, RPA, advanced Excel / Google Sheets skills, utilising AI / ML are added advantage.
• Strong literacy in English and willing to learn in a changing industry.
• Interested candidates with MEP / HVAC / ACMV field experience are welcomed to apply.
• Fresh graduates welcomed to apply, training will be provided.

Advantages Remunerations

• 5 day work week.
• Progression-centric
• AWS included
• Variable Performance Bonus
• Annual Incentive Trip
• Further learning/education encouraged and sponsorships
• Flexible working hours and Work from home accepted on top of physical attendance
• Various Medical Benefits

Job Description
As a Design Engineer, you will report to the Senior Design Engineer and be responsible for the successful implementation and management of BIM processes in the construction field, specifically focusing on Building Services, Airconditioning, and Mechanical (M&E, ACMV) works. You will collaborate closely with the design department to ensure compliance with engineering and safety requirements and coordinate with stakeholders to maintain the integrity and accuracy of the BIM model throughout the project lifecycle.

Key Responsibilities

1. Construct and manage Building Information Models (BIM) with precision, ensuring the integrity and accuracy of all models. Ensure timely coordination and completion of tasks as assigned by the immediate superior.
2. Ensure all BIM models comply with project specifications and requirements.
3. Maintain and update the model library for all ongoing projects, ensuring that all data remains secure and is treated as company property.
4. Collaborate with project teams to collect site information for updating project BIM models.
5. Work closely with the Quantity Surveying department to provide drawings and information required for tendering, cost estimation, monitoring, and scheduling.
6. Coordinate with the BIM department to validate and confirm the accuracy of BIM designs.
7. Maintain, update, and manage hardware and software essential for the operation of BIM.
8. Assist in the creation of 2D AutoCAD drawings and ensure seamless integration between 2D and BIM models, bridging the gap between office and site operations.
9. Ensure all work conforms to the company’s ISO standards.
10. Support the submission of Operation, Maintenance, and Monitoring (OMM) manuals and media presentations using BIM models.
11. Follow the company's responsibility and authority matrix in the execution of duties.
12. Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes and standards, such as Singapore Code of Practice (CP13), SS553, and the Fire Code.
13. Utilize design software to perform thermal load calculations, energy modelling, and system sizing.
14. Prepare design documents including system layouts, schematics, and specifications.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Overview:

• Report directly to the Project Manager, managing ACMV works within the built environment.
• Ensure project management aligns with engineering and contractual requirements.
• Collaborate with the design department to ensure compliance with engineering and safety standards.
• Oversee contracts, costs, schedules, coordination, and overall project completion.

Key Responsibilities:

1. Manage projects from concept to completion, including planning, scheduling, budgeting, and stakeholder coordination.
2. Implement and oversee Project Quality Plan, Safety Management Plan, and Building Execution Plan.
3. Develop, maintain, and manage the BIM model and project documentation (drawings, specifications, reports).
4. Liaise with clients to meet their requirements and ensure project scope, schedule, and budget compliance.
5. Address and resolve technical or contractual issues during the project lifecycle.
6. Oversee the construction process to ensure timely, budget-compliant, and high-quality completion.
7. Coordinate with consultants, contractors, and ensure contractor performance.
8. Manage project handover to the client, ensuring compliance with all relevant Singapore regulations and standards.
9. Promote and manage safety activities and compliance inspections.
10. Obtain necessary permits and approvals and work with authorities to minimize public disruption during construction.
11. Ensure sustainability and environmental friendliness of the project.

Preferred Experience:

• Experience in healthcare facilities (hospitals, labs, operating theatres).
• Experience in commercial or industrial buildings (warehouses, factories).
• Experience with government projects and data centers.

Requirements:

• Degree in Mechanical Engineering, Building Services, Project Management, or a related field, with ACMV project experience preferred.
• Graduates with a degree in Sustainable Infrastructure are encouraged to apply.
• Bizsafe Level 2 safety certification or higher preferred.
• Minimum 3 years of experience in related fields preferred, though fresh graduates are welcome to apply.
• Proficiency in English (written and spoken).
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM and a valid driver's license are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Overview:

The Assistant Project Engineer will report directly to the Project Manager and manage ACMV (Air-Conditioning and Mechanical Ventilation) works within the built environment. The role involves ensuring that all project activities comply with engineering and contractual requirements. This position requires collaboration with the design department to meet engineering and safety standards, while overseeing contracts, costs, schedules, and overall project completion.

Key Responsibilities:

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Support the development and maintenance of the BIM model, ensuring it is accurate and up-to-date.
• Assist in the preparation and management of project documentation, including drawings, specifications, and reports.
• Collaborate with the client to help meet their requirements under the guidance of the Project Engineer
• Assist in verifying changes to project scope, schedule, or budget, ensuring compliance.
• Help in resolving technical or contractual issues that arise during the project, with the support of the senior team.
• Provide assistance in managing the construction process to ensure it progresses on time, within budget, and meets quality standards.
• Support monitoring the performance of contractors, ensuring they meet their obligations.
• Coordinate with various consultants and contractors, under the guidance of the Project Engineer.
• Assist in the handover process of the project to the client.
• Comply with all relevant Singapore regulations and standards under the supervision of senior project staff.
• Promote safety management activities and assist in compliance inspections.
• Assist in obtaining necessary permits and approvals.
• Support sustainability efforts and ensure the project adheres to environmental standards.
• Help minimize disruption to the public during construction by coordinating with authorities.

Requirements:

• Diploma or Degree in Mechanical Engineering, Building Services, Project Management, or a related field. ACMV project experience is preferred.
• Bizsafe Level 2 safety certification or higher preferred.
• A minimum of 1 year of experience in a related field is preferred, though fresh graduates are welcome to apply.
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Career development focused on progression and growth.
• AWS included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.

Report to BIM, Project Engineer / DfMA Manager.

Scope of assist in maintaining product quality within the factory.

Collaborate with the team to meet quality standards and objectives.

Maintain records of quality control activities.

Work closely with suppliers and vendors to ensure quality compliance.

Assist in quality investigations and problem-solving.

Participate in training and development opportunities to enhance you skills

Requirements:

Diploma or above in mechanical engineering or related qualification

Knowledge in both M&E services and DfMA Principles, Familiarity with QA/QC process, tools and techniques. Knowledge in Industry Standards. Knowledge in BIM is an added advantage.

Strong independence and good communication in English

Able to work 5.5 days week

Fast progression position

Progression-centric

AWS included

Variable Performance Bonus

Annual Incentive Trip

Further learning/education encouraged and sponsorships

Flexible working hours and Work from home accepted on top of physical attendance

Various Medical Benefits

Key Responsibilities:

• Process and manage accounts payable, including vendor invoices, expense claims, and other payments.
• Sort invoices received, data entry of invoices/ PO/ GRN and perform 3-way match.
• Responsible for handling and processing the billing to customers and ensure that all billings are correctly invoiced & recorded.
• Ensure timely reconciliation of financial transactions, bank statements and GST filing.
• Maintain accurate and up-to-date financial records and documentation.
• Assist with the preparation of monthly and annual financial closing & reports.
• Assist in budgeting and forecasting activities to align the strategic goal of the organization.
• Assist administrative tasks, including preparing documentation, new hire onboarding, maintain accurate employee records.
• Manage and maintain inventories of office supplies such as stationery, printer consumables (including maintenance), and other office materials.
• Oversee office logistical matters such as telecommunications, mail/courier services, conference accommodations and etc.
• Perform other administrative tasks as required

Key Requirements:

• Diploma / Nitec in Accounting, Finance, or related field
• 2-3 years of relevant working experience in finance/accounting position (Fresh graduates are welcome to apply)
• Proficiency in accounting software and Microsoft Office applications.
• Knowledge of Singapore accounting standards and regulations
• A positive team player with the ability to multitask and a proactive work attitude
• Detail-oriented, with strong interpersonal and communication skills.
• High level of accuracy, efficiency, and accountability
• Ability to maintain confidentiality and handle sensitive information
• Willing to learn, independent & meticulous
• Able to start work immediately or in short notice
• Singaporean and Permanent Resident only

Job Responsibilities:

• Planning and scheduling of projects
• To manage M&E construction projects and to monitor the projects are carried out with respect to the target schedule
• To handle design for Electrical distribution System/lighting/power/PA System/solar/switchboard/transformer and to ensure clients' requirements are met
• To attend project meeting and to coordinate with clients, consultants, main contractors and sub contractors
• Preparation of Progress Claim, Materials Submission, Risk Assessment, Progress Report, Shop Drawings & As Built Drawings for projects
• To forecast and anticipate possible issue for projects and to eliminate potential risks
• Site supervision and to liaise with supervisors and workers to ensure smooth work flow
• Planning of manpower and work arrangement with site person in charge
• To liaise with suppliers on procurement and delivery of materials and equipment
• Preparation of Method of Statement, Risk Assessments for various installation works
• Assist in settlement of project final account including variation orders

Requirements:

• Candidate must possess at least Diploma/Bachelor's Degree/Post Graduate Diploma/Professional Degree in Mechanical Engineer
• Preferably Engineer specialized in Engineering - Electrical/Mechanical or equivalent
• At least 3 Year of working experience in the related field is required for this position
• Demonstrated expert experience in electrical System/Fluently in Auto Cad design /Microsoft
• Energetic, leadership, self motivated, good problem solving skills, positive attitude, good written and communication skills.
• Self initiative and positive thinker
• Committed on job assign

Job Description:

• Develop accurate and detailed 3D BIM models of ACMV systems, including ductwork, piping, equipment, and components, based on engineer's drawings, specifications, and calculations.
• Model complex geometries and assemblies while adhering to project standards and BIM execution plans.
• Generate shop drawings, sections, and details from the model for fabrication, installation, and coordination.
• Collaborate closely with architects, engineers, and other disciplines to ensure design integrity and resolve clashes effectively.
• Participate in BIM coordination meetings to identify and resolve potential conflicts between different building systems.
• Utilize clash detection software (e.g., Navisworks) to identify and resolve clashes early in the design process.

Job Responsibilities:

• Embed relevant data into the model such as material specifications, manufacturer details, installation instructions, and maintenance schedules.
• Maintain model integrity and consistency throughout the project lifecycle, ensuring it remains up-to-date with the latest revisions.
• Generate reports and schedules from the model, including material takeoffs, equipment lists, and construction sequencing.
• Possess a strong understanding of ACMV principles, including ventilation rates, duct sizing, pipe sizing, and equipment selection.
• Be proficient in relevant BIM software such as Autodesk Revit, AutoCAD MEP, and Navisworks Manage.
• Stay updated with the latest BIM standards and technologies and assist with the preparation of as-built drawings.
• Provide technical support to the project team and contribute to the development and implementation of BIM workflows.

Skills and Qualification:

• Diploma or Degree in Mechanical Engineering or a related field. Proven experience as an ACMV BIM modeller or a similar role.
• Proficiency in Revit MEP and other related BIM software. Strong understanding of ACMV design principles and standards.
• Excellent communication, collaboration, and problem-solving skills.
• Strong independence and good communication in English

Advantages / Remunerations

• 5 days work week
• AWS included
• Variable Performance Bonus
• Annual Incentive Trip
• Various Medical Benefits
• Flexible working hours and Work From Home accepted on top of physical attendance

Fast progression position

• Progression-centric
• Further learning / education encouraged and sponsorships.

JOB DESCRIPTION

- To assist welding engineering personnels in the production

- To perform welding/metalworking jobs and other related jobs
- Read and interprete engineering and fabrication drawings

- Assist in other production as and when required

Requirements:

-Must be willing to work overtime-5.5 day work week

-Singaporean and PR , foreigners are also welcome

-Must have least 2 years of working experience in Fabrication or engineering

-Experience in using electrical or manual tools (saws, squares, calipers etc.)

-Ability to read and interpret technical documents and drawings

- Forklift licence would be an advantage

Job Description.

1. Strong ability to handle pressure and multitask
2. Ability to communicate effectively and liaise with clients
3. Assist in organizing and managing tasks related to the executive’s work and personal affairs
4. Adhoc duties as and when assigned.
5. Writing memos, correspondence, invoices, receipts, spreadsheets and other reports as needed
6. Keeping the office database and filing system up to date and organized
7. Purchasing office supplies and work with vendors
8. Sorting and delivering all mail
9. Responsible to manage payment schedules and ensure all payments are made on time.
10. Responsible to liaise with clients, customers and closely follow up with the payments.
11. Performing clerical accounting and general office duties
12. Renewal and Application for work passes inclusive of construction workers and engineers
13. Assisting with payroll preparation
14. Update and ensure that all invoices and expenses are reviewed and approved for processing
15. Manage office equipment, supplies and stationery inventory, ensuring timely purchase and replenishments.
16. Replies to email, telephone or face to face enquiries
17. Available to start immediately.

Requirement:

1. Must be able to work on shift
2. Must be willing to work in fast paced working environment
3. Provide quality Management and Administrative support
4. Able to work on weekends and public holidays
5. Minimum Diploma in Business Administration or equivalent.
6. Relevant working experience preferred.
7. Ability to work independently and as part of a team.
8. Responsible, reliable, willing to learn.
9. Self-motivated, detail-oriented, and capable of multitasking.
10. Proficient in Microsoft Office (Word & Excel).
11. Ability to manage time effectively and prioritize tasks.
12. Good communication skills, both verbal and written.