• Install, maintain, and repair electrical wiring, equipment, and fixtures.
• Ensure compliance with electrical codes and safety standards.
• Read and interpret blueprints, schematics, and technical drawings.
• Test electrical systems and continuity of circuits using testing devices.
• Inspect electrical systems, equipment, and components to identify hazards and defects.
• Maintain accurate records of maintenance and repair work.
• Collaborate with other maintenance staff and departments.
• Provide emergency repairs and support as needed.
• Stay current with industry standards and technological advancements.
• Assist in the development and implementation of maintenance procedures.
• Train and mentor junior technicians.
• Participate in safety training and adhere to safety protocols.
• Troubleshooting and repairing malfunctioning equipment, appliances, and apparatus.
• Constructing and fabricating parts, using hand tools and specifications.
• Reading and interpreting electrical and electronic circuit blueprints, diagrams, and schematics.
• Advising management on continued use of unsuitable equipment, appliances, and apparatus.
• Supervising electricians.

Roles & Responsibilities

The Quantity Surveyor reports to the Senior Quantity Surveyor and assists in all costs and contractual issues in Main Contract as well as Sub-Contracts connected to the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Ensure accurate measurement of quantities to assist in the preparation of progress payment claims, variation order claims and payments to subcontractors and suppliers including all final accounts.
• Involve in preparing regular cost reports including maintenance budget cost controls.
• Assist in maintaining good documentation of events at site for variation order / EOT claims.
• To work closely with the site storemen to ensure proper documentation of materials control.
• Be familiar with the specifications and scope of works at various stages of the project so as to be able to advise the structural, architectural and M&E coordinators on the contracted design requirements.
• Assist in the procurement of sub-contractors and suppliers of specified materials.
• Attend technical meetings to keep abreast of design development issues and provide cost escalation alerts.
• Learn and be adequately briefed on the contractual / legal rights of the Main Contractor in order to advise colleagues at site and the management on any choke points during the project.
• Adherence to safety practices in the workplace.

Value Add of Position

• Help the project’s bottom line by rigorously monitoring and implementing cost controls.
• Establish a good relationship with Client, Consultants and subcontractors to ensure that the project is smoothly managed in terms of resources and timeline.

Qualifications and Education Requirements

• Education: Degree/Diploma in Quantity Surveying, Building or Civil Engineering
• Experience: Minimum 3 year of working experience in tendering, estimating and measurement of quantities in civil projects
• Good analytical skills

JOB DESCRIPTION:

Division: Regional Product Marketing

Reports to: Regional Product Marketing Division General Manager

Functional Relationships with:

ASEAN and India Sales Team; Communicate and collaborate with Japan HQ and Oversea technical affiliate for products’ promotion, technical support / troubleshooting, and new technical feasibility collaboration, and creation.

Position Profile:
The Application Engineering Manager is responsible to support the General Manager for developing and executing engineering solution services for overall business plan and strategic direction of the organization, specifically in the areas of engineering solution mid-term strategy, new market exploration and creation & business generation. He/she offers strategic leadership by articulating in depth technical feasibility knowledge and proposals (including both hardware, software and system) to develop solutions for customer and explore new market. Additionally, he is required to collaborate with various functional group in Japan HQ and other regional-HQ to synergize business creation initiatives.

Key Duties & Responsibilities:

• Develop Application Engineering services’ strategies & policy to support the achievement of the overall business objectives for ASEAN + India region.

• Synergize the product policy and strategy alignment with various functional group (HQ and other RMC) for targeted business segments’ opportunities creation.

• Lead application engineering activities for ASEAN region and enhance business wins though value creation and technical consulting service.

• Accelerate of immediate business opportunities.

• Technical support for connectivity module (embedded engineering)

• Product feature & demo tools development

• Conceptualize and facilitate the integration of Murata’s products (connectivity, sensor, etc) into solution and proposal for customer.

• Identify the local unique requirement & business opportunity through tech application marketing.

• Support engineering requirement (S/W, system, and H/W) into additional solution.

• Provide technical feasibility & perspective for possible Layer 3 business in ASEAN region.

• Support the product/business case development process through total Murata’s qualification and approval compliance, including all phases of evaluation, PoC, DR and QC/QA into mass production.

ABILITY/COMPETENCY REQUIRED

· Master degree in Electronic Engineering or related field preferred.

· A minimum of 15 years of working experience in regional / global embedded engineering environment & electronic industries.

· Proven records of product/system development project with connectivity’s technologies.

· Strong proficiency in embedded electronics, S/W and development platform of various micro-controller.

· Excellent verbal, written communication, and presentation skills.

· Deep understanding of market trends and development experience.

· Excellent interpersonal and conflict resolution skills.

· Excellent organizational and leadership skills.

· Strong analytical and problem-solving skills.

Keysight is the world's leading electronic measurement company, helping scientists and engineers address their toughest technical challenges with confidence through innovations in wireless, modular, and software solutions. Our employees leverage their insight and passion to deliver measurement solutions in wireless communications, aerospace and defense, and semiconductor markets with world-class platforms, software and consistent measurement science. This job will be part of the Communications Solutions Group, which is responsible for Keysight's portfolio in the Wireless Data Ecosystem, including wireless devices, operators, internet infrastructure, and Aerospace & Defense. Our software-centric solutions accelerate our customers' time to market and reduce their costs - giving them a competitive advantage in today's and tomorrow's technology waves.

Job Description

This position is for a full-time Software Engineer to join Keysight’s Quantum Engineering Solutions (QES) organization, which is responsible for producing world-leading solutions in quantum technologies, including quantum computing, quantum communications and quantum sensing. As a Solution Developer, you will be part of an R&D team and launch breakthrough software solutions to market. You will engage in every stage of our product development process, addressing intricate technical challenges in a customer-centric environment. Your role will focus on integrating open-source quantum computing software with quantum control systems, ensuring seamless execution of workflows in HPC and cloud environments. You will design and implement scalable cloud-based solutions for quantum workloads, collaborate with cross-functional teams to develop integration tools, and optimize HPC workflows for distributed quantum computing operations.

Job Responsibilities

• Integrate open-source quantum computing software with quantum control systems to enable seamless execution of experiments and workflows in cloud environments.
• Design and implement scalable cloud-based solutions for quantum computing workloads, ensuring high performance and efficient resource utilization.
• Collaborate with cross-functional teams to develop APIs, libraries, and tools that enhance the integration of quantum software and control systems.
• Work closely with technology teams in an Agile environment to integrate cloud services and optimize operational efficiency.
• Ensure best practices in cloud operations, establish key performance indicators, and develop and enforce cloud security and compliance measures.

Job Qualifications

• BS/MS in Computer Science, Computer Engineering, or equivalent.
• Over 5 years of experience, including leading cloud platforms in public cloud environments.
• Strong experience with High Performance Computing (HPC) and cloud platforms, including deploying and optimizing distributed computing workflows for high-performance applications.
• Proficiency in Python, C#, C++, JavaScript, and other modern programming languages (e.g., Golang, Julia).
• Experience in integrating complex software systems, including APIs, libraries, and tools, with a focus on performance, scalability, and reliability.
• Proven experience as a Cloud Engineer.
• Good knowledge of DevOps practices.
• Familiarity with cloud security, compliance, and cost management.
• Good understanding of quantum information science is desired but not mandatory.
• Excellent analytical and troubleshooting skills.
• Ability to work in a collaborative environment and to develop teamwork among individuals and over geographically disperse teams.
• High tolerance for ambiguity, results-oriented, meets timelines, handles pressure while working positively in a collaborative manner.
• Excellent written and verbal communication skills
• Willingness to learn proactively.

Keysight is the world's leading electronic measurement company, helping scientists and engineers address their toughest technical challenges with confidence through innovations in wireless, modular, and software solutions. Our employees leverage their insight and passion to deliver measurement solutions in wireless communications, aerospace and defense, and semiconductor markets with world-class platforms, software and consistent measurement science. This job will be part of the Communications Solutions Group, which is responsible for Keysight's portfolio in the Wireless Data Ecosystem, including wireless devices, operators, internet infrastructure, and Aerospace & Defense. Our software-centric solutions accelerate our customers' time to market and reduce their costs - giving them a competitive advantage in today's and tomorrow's technology waves.

Job Description

This position is for a full-time Project Manager to join Keysight’s Quantum Engineering Solutions (QES) organization, which is responsible for producing world-leading solutions in quantum technologies, including quantum computing, quantum communications and quantum sensing. The ideal candidate will be responsible for tracking project deadlines, managing delivery schedules, and leading a team of talented engineers and researchers. While a deep understanding of quantum computing is not required, some familiarity with the field is beneficial. Experience in HPC (High-Performance Computing), data science projects cloud computing, and managing open-source projects will be highly preferred.

Job Responsibilities

• Oversee and manage the lifecycle of projects, ensuring timely delivery and alignment with project goals.
• Track project milestones, deadlines, and deliverables, adjusting plans as necessary to meet objectives.
• Lead and motivate a multidisciplinary team, fostering collaboration and effective communication across all project stages.
• Collaborate with technical leads to ensure project scope and objectives are aligned with organizational goals.
• Coordinate with stakeholders, providing regular updates on project status and addressing any risks or issues that may arise.
• Ensure proper documentation and reporting for all project phases.

Job Qualifications

• BS/MS in Computer Science, Computer Engineering, Management or equivalent.
• Over 10 years of experience in project management, preferably in a technical or scientific environment.
• Basic understanding of software engineering.
• Experience managing HPC, data science, and cloud computing projects is strongly preferred.
• Experience managing open-source projects is a plus.
• Good understanding of quantum information science is desired but not mandatory.
• Excellent analytical and troubleshooting skills.
• Ability to work in a collaborative environment and to develop teamwork among individuals and over geographically disperse teams.
• High tolerance for ambiguity, results-oriented, meets timelines, handles pressure while working positively in a collaborative manner.
• Excellent written and verbal communication skills
• Willingness to learn proactively.

Job Description:

The Project/Site Engineer will assist in the supervision and coordination of Electrical & Control systems for construction projects. The role involves monitoring project progress, managing resources, and ensuring quality standards are met. The engineer will work closely with internal teams, clients, subcontractors, and suppliers to ensure timely project execution and compliance with technical requirements.

Responsibilities:

• Supervise and assist in the execution of Electrical & Control system works on-site.
• Coordinate project planning, documentation, and execution.
• Monitor project progress, manpower mobilization, and material planning.
• Liaise with internal teams, clients, subcontractors, and suppliers to resolve issues.
• Conduct site inspections and ensure quality control.
• Manage the preparation and submission of method statements, shop drawings, and other required documentation.
• Report to the Project Manager (PM) or Construction Manager (CM).

Requirements:

• Diploma or Degree in Electrical Engineering or related field.
• 1-5 years of experience in construction projects.
• Strong communication skills and ability to collaborate across departments.
• Knowledge of project management processes.
• Experience in wafer fabs or pharmaceuticals is a plus.

We are looking for a Mechanical Engineerto assist in site supervision and coordination of ACMV systems for a construction project. Key duties include overseeing project execution, managing progress, coordinating with stakeholders, and ensuring quality control.

Responsibilities:

• Assist in ACMV system installation and commissioning.
• Coordinate project planning, materials, and manpower.
• Supervise subcontractors and monitor work progress.
• Conduct site inspections and ensure compliance with standards.
• Prepare reports and documentation as required.

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent.
• 1-5 years of relevant experience in construction projects (ACMV systems preferred).
• Good communication skills and project management knowledge.
• Experience in wafer fabs or pharmaceuticals is a plus.

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

This position focuses on strategy and modeling creation, improving global standardizations, enable sustainability through automation, synchronizing the processes and scaling the solutions to transform the inline interdiction and operation system automation for RAM Quality and Operation Engineering sections.

Responsibilities:

• Establish and improve BKM (Best Known Method) for RAM quality defense line, sampling methodology, sampling systems and operation efficiency.
• Improve quality and yield performance by reducing defect OOC% variation.
• Keen to learn new skills, initiate proactive and continuous improvement projects, in areas across the Front-End including manufacturing methods and processes, quality, software systems, cycle time, key tool metrics (utilization, and performance efficiency), maintenance and routine tasks, and other manufacturing support operation.
• Establish metrics that can efficiently audit adoption rate and compliance to business process, BKM and strategy and perform audits.
• Perform quality deviation investigations, fab metrics benchmarking analysis and find opportunity for improvements.
• Lead and facilitate discussion to drive network alignment on strategy business process and roadmap to achieve area objectives and deliver to timelines/commitments. Ensure BKM sharing spans across all sites regardless of technology and/or site mission differences.
• Actively provide recommendations to improve and optimize programs and processes to the respective program and/or process owners.
• Provide tactical support and coordination for the Fabs for issues of People, Safety, Yield, Quality, Cost, and Cycle Time when required.

Qualifications & Skills:

• Good communication skill, maintain a strong and open relationship with peer group and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management and present strategy and updates to network members and leaders.
• Proficient in project management with good resource planning, status monitoring and deliver timely results.
• Promote worldwide sharing and transfer of area-specific knowledge.
• Proficiency, experience, and knowledge relating to product and test wafer capacity modeling, wafer at risk modeling, Failure Mode Effect Analysis (FMEA) concept and system, defect analysis tools, sampling strategy and systems, Statistical Process Control (SPC) tools, Cycle Time Management, tableau creation, SQL and Programming language and Organizational Change have advantage.

Education and Experience:

• Masters/bachelor’s in engineering
• Relevant working experiences in RDA and/or Metrology
• Willing and capable of international travel, including Extended International Business Travel (EIBT) assignment to 6 months as needed, to accomplish the goals.

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Electrical Engineering Manager Job Responsibilities: In this section, you’ll want to use a bulleted list to explain the role’s responsibilities in order of importance, as illustrated below.

• Achieves optimal electrical system operational efficiency by developing and maintaining electrical systems.
• Accomplishes operational objectives by recruiting, onboarding, and managing employees.
• Communicates job expectations, monitoring and reviews job contributions, plans and adjusts compensation actions, and enforces staff policies and procedures.
• Optimizes engineering performance by contributing engineering recommendations to strategic planning and reviews; preparing and completing action plans; implementing production, productivity, quality, and customer-service standard goals; resolving engineering issues; completing audits; identifying trends; determining system improvements; and implementing change.
• Meets departmental financial objectives by forecasting requirements and challenges, preparing an annual budget, scheduling expenditures, analyzing variances, and initiating corrective actions.
• Develops strategic electrical plans by studying operational plans and existing conditions, determining needs to accomplish operational plans, mapping solutions, updating and modifying requirements and solutions, and preparing cost estimates and budgets.
• Plans electrical projects by determining specifications, selecting contractors, establishing installation schedules, planning shut-downs and installations, integrating architectural and mechanical design specifications, verifying code requirements, and updating cost estimates.
• Completes electrical projects by supervising installations and resolving design issues.
• Maintains electrical systems by establishing and enforcing ongoing maintenance schedules and procedures and testing programs, scheduling repairs, and coordinating shut-downs and installations.
• Maintains safe and healthy work environment by establishing, following, and enforcing standards and procedures, and complying with legal regulations.
• Updates job knowledge by remaining current on codes and requirements, participating in educational opportunities, reading professional publications, and participating in professional organizations.
• Accomplishes engineering and organization mission by collaborating with other members of senior management.
• Manages vendor and subcontractor relationships.

[Work Hours & Benefits] In this section you should aim to sell the position to potential applicants, just like the first section of your technical writer job description sold candidates on your workplace. Highlight the position’s benefits and bonus potential and consider adding your electrical engineering manager salary range as well. Greater pay transparency can build trust with candidates and can also get you candidates more likely to accept an offer. To ensure that the salary range you mention is in line with similar engineering manager salaries in your sector, community or region, use a salary tool that allows you to input job title and location.

Electrical Engineering Manager Qualifications/Skills: In this section of your engineering manager job description, you should use a bullet list to convey the qualifications you are seeking in an ideal candidate. If the list gets long, consider breaking it into two separate lists labeled as “Required” and “Preferred.” Whether you use one list or two, begin with the most important skills you are seeking, as illustrated below:

• Electronic testing design
• Electronic production technologies
• Electronic systems
• Technical management
• Budgeting
• Management proficiency
• Electronics troubleshooting
• Basic safety
• Quality focus
• Process improvement
• Leadership
• Report writing skills
• Project management
• Vendor and subcontractor relationship building and maintenance

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Scope Summary:

• Managing the production of prefabricated MEP modules in a factory setting
• Ensuring quality control and compliance with standards and specifications
• Coordinating with design teams, contractors and suppliers
• Supervising the delivery and installation of MEP modules on site
• Troubleshooting any issues or defects that arise during or after assembly

Detailed Scope:

1. Manage Prefabrication Factory/Yard reporting to Project Director, overseeing prefabrication production of MEP modules and manpower planning.
2. Ensure that MEP design and construction processes are in line with the latest developments in technology and software, such as Building Information Modeling (BIM). Keep abreast of the latest technological developments and advancements in the MEP industry, and identify opportunities for innovation and improvement in the production process.
3. Develop and implement processes and procedures that are compliant with industry standards and best practices, including those set by the Building and Construction Authority (BCA) and other relevant regulatory bodies. Implement Building Information Modelling (BIM) to Field technology, which involves the use of 3D modelling software and mobile devices to facilitate communication and collaboration between the design team and the production team.
4. Stay up-to-date with the latest technological developments in MEP design and construction, including automation, prefabrication, and modular construction techniques.
5. Develop and implement strategies for the use of technology and digital tools, including BIM software, to improve the efficiency and accuracy of MEP design and construction processes.
6. Ensure that all MEP design and construction activities are carried out in accordance with relevant safety and environmental regulations and standards.
7. Collaborate with other stakeholders, including architects, engineers, and contractors, to ensure that MEP systems are integrated seamlessly into the overall building design and construction process.
8. Develop and implement training programs to ensure that all relevant stakeholders, including MEP design and construction teams, are up-to-date with the latest technological developments and best practices. Develop and implement training programs for employees to ensure that they have the necessary skills and knowledge to work with new technologies and methods.
9. Implement quality control and quality assurance measures to ensure that MEP systems meet the highest standards of quality and performance.
10. Develop and implement processes and procedures to ensure that MEP systems are delivered on time and within budget.
11. Monitor and report on the performance of MEP systems, using data analytics and other tools to identify areas for improvement and optimize performance.
12. Develop and maintain strong relationships with suppliers, contractors, and other stakeholders in the MEP design and construction process.
13. Stay up-to-date with the latest developments in sustainability and green building practices, and ensure that MEP systems are designed and constructed with sustainability in mind.
14. Ensure that all MEP design and construction activities are carried out with the highest levels of professionalism and ethical standards.
15. Develop and implement processes and procedures to ensure that MEP systems are tested and commissioned to the highest standards, and that all relevant documentation and certification is in place.
16. Ensure that all MEP design and construction activities are carried out in compliance with relevant laws, regulations, and codes of practice.
17. Maintain accurate and up-to-date records of production processes and outcomes, and use data analytics and other tools to monitor and optimize performance.
18. Foster a culture of continuous improvement and innovation within the organization, encouraging employees to identify opportunities for improvement and to share their ideas and insights with the broader team.
19. Establish and maintain partnerships with technology providers and other industry stakeholders to leverage their expertise and resources in the development and implementation of new technologies and methods.
20. Implement Lean Management principles, which involve the optimization of processes and the elimination of waste, to improve productivity and efficiency in the production process.
21. Implement Integrated Digital Delivery (IDD) methods like IOT implementation, which enable the seamless sharing of information and data between different stakeholders in the construction process, including architects, engineers, contractors, and facility managers.

Requirements

• Degree in Mechanical engineering and related specialist diploma in DFMA, SDCP or BIM
• Safety certified, minimum Bizsafe level 2
• 3 years or more working experience in related fields preferred
• Good language capability (English) both in written and spoken
• Strong independence and leadership in teamwork environment.
• Fresh graduate may apply.
• Knowledge in BIM and experiences in MEP prefabrication are added advantage

Advantages / Remunerations

5 day work week.

Progression-centric

AWS included

Variable Performance Bonus

Annual Incentive Trip

Further learning/education encouraged and sponsorships

Various Medical Benefits

Job Requirements:

· Bachelor’s Degree or Diploma in Engineering (Mechanical/Electrical) or related field required

· Preferably 4+ years’ related field and project planning experience

· Excellent project management skills desired

· Must have driving license

· Good written and verbal communication skills is a plus

· Field management experience a plus

· Entry level are welcome to apply

· Preferably have experience in water and wastewater industry & piping installations

· Passion for looking for ways to improve individual and/or company performance

· Responsible and Independent

Job Responsibilities:

· Assists in preparation and implementation of Project Execution Plan.

· Attends the Weekly Progress Meetings (Internal as well as with Client) and assist in preparation of Minutes of Meetings.

· Monitors work in progress and prepares weekly report of the status of each assignment.

· Ensuring all procedures and calculations are submitted to the client for review and approval.

· Coordinates materials and assists in the logistics, its shipment and receipt at construction site.

· Coordinates with all project related personnel on day-today progress of work activities, procurement and operations to ensure timely completion of the project.

· Provide full support as required by the Management and Project Team for all projects.

· Overall coordination and management on manpower schedules.

• JOB DESCRIPTION
• Preparing specifications for purchases of electrical equipment and materials.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Supervising or training project team members.
• Power Distribution Planning: Design power distribution systems for the bored tunnel and the entire site.
• Maintenance and Troubleshooting: Conduct maintenance and resolve issues for TBM, electrical systems, locomotives, batching plants, cooling towers, and other tunnel facilities.
• Manage and supervise projects, electrical inspections, and licensing tasks assigned by the Project Manager.

Job Description:

• Develop accurate and detailed 3D BIM models of ACMV systems, including ductwork, piping, equipment, and components, based on engineer's drawings, specifications, and calculations.
• Model complex geometries and assemblies while adhering to project standards and BIM execution plans.
• Generate shop drawings, sections, and details from the model for fabrication, installation, and coordination.
• Collaborate closely with architects, engineers, and other disciplines to ensure design integrity and resolve clashes effectively.
• Participate in BIM coordination meetings to identify and resolve potential conflicts between different building systems.
• Utilize clash detection software (e.g., Navisworks) to identify and resolve clashes early in the design process.

Job Responsibilities:

• Embed relevant data into the model such as material specifications, manufacturer details, installation instructions, and maintenance schedules.
• Maintain model integrity and consistency throughout the project lifecycle, ensuring it remains up-to-date with the latest revisions.
• Generate reports and schedules from the model, including material takeoffs, equipment lists, and construction sequencing.
• Possess a strong understanding of ACMV principles, including ventilation rates, duct sizing, pipe sizing, and equipment selection.
• Be proficient in relevant BIM software such as Autodesk Revit, AutoCAD MEP, and Navisworks Manage.
• Stay updated with the latest BIM standards and technologies and assist with the preparation of as-built drawings.
• Provide technical support to the project team and contribute to the development and implementation of BIM workflows.

Skills and Qualification:

• Diploma or Degree in Mechanical Engineering or a related field. Proven experience as an ACMV BIM modeller or a similar role.
• Proficiency in Revit MEP and other related BIM software. Strong understanding of ACMV design principles and standards.
• Excellent communication, collaboration, and problem-solving skills.
• Strong independence and good communication in English

Advantages / Remunerations

• 5 days work week
• AWS included
• Variable Performance Bonus
• Annual Incentive Trip
• Various Medical Benefits
• Flexible working hours and Work From Home accepted on top of physical attendance

Fast progression position

• Progression-centric
• Further learning / education encouraged and sponsorships.

An ACMV (Air Conditioning & Mechanical Ventilation) Installation Site Coordinator plays a crucial role in overseeing and coordinating the installation of ACMV. Their duties and responsibilities are focus on ensuring the project is completed efficiently, safely, and within budget. Detailed breakdown of their responsibilities shall be as below and but not limited to:

1. Project Planning & Scheduling

• Work Scheduling: Coordinate and schedule all activities related to the installation of ACMV systems, ensuring that work is carried out according to the project timeline.
• Resource Allocation: Ensure that manpower, materials, and equipment are available as per project needs and schedules.
• Coordination with Contractors: Collaborate with subcontractors, suppliers, and other vendors involved in the installation process to ensure timely delivery and work execution.

2. Site Supervision

• Site Setup: Oversee the setup of the installation site, ensuring that all necessary equipment and materials are in place.
• Installation Supervision: Monitor the installation of ACMV systems such as ducting, piping, chillers, AHUs (Air Handling Units), FCUs (Fan Coil Units), BMS system, ESCS system, Jet Fan system and other components.
• Safety Compliance: Ensure that the installation is carried out according to safety regulations and that all team members are adhering to safety protocols (e.g., wearing PPE, following safety guidelines).
• Quality Control: Supervise the installation process to ensure that the work is completed to the required quality standards and complies with the project specifications and drawings.

3. Technical Support & Problem Solving

• Troubleshooting: Identify and resolve technical /site issues, constraint that arise during installation, working closely with engineers and technicians to provide solutions.
• Technical Assistance: Provide on-site technical support to ensure the correct assembly and installation of ACMV systems as per the design specifications.
• Adjustment & Modification: Recommend and implement necessary adjustments or modifications during the installation process to address unforeseen issues or improve efficiency.

4. Liaison with Stakeholders

• Client Interaction: Act as the main point of contact between the client and the project team, ensuring that the client's requirements and expectations are met.
• Coordination with Engineers: Work closely with Supervisor, Engineers, Designers, BIM team and Project Manager to ensure the installation meets design specifications and standards.
• Reporting: Provide regular progress updates and reports to Project Managers, Site engineers, and other relevant stakeholders.

5. Documentation and Reporting

• Project Documentation: Maintain accurate records of installation activities, including daily site reports, inspection reports, and material usage logs.
• Variation Management: Track and document any changes or variations to the project scope and ensure they are communicated to the relevant stakeholders.
• Site Meetings: Attend regular site meetings to review progress, discuss challenges, and plan the next phase of work.

6. Inspection & Testing

• Inspection of Installation: Ensure all installed systems and equipment are properly inspected for compliance with design and installation standards.
• Pre-commissioning Tests: Coordinate pre-commissioning tests, including leak testing of ductwork and piping, to verify the systems' integrity and performance. ACMV RI and TOP items inspection preparation and check before RI and TOP inspections.
• Final Commissioning: Assist in the commissioning of ACMV systems, ensuring that all testing, balancing, and adjustments are completed before handing over to the client.

7. Health, Safety, and Environmental Compliance

• Safety Training: Conduct safety briefings and ensure all workers are trained in safety practices specific to ACMV installation.
• Environmental Compliance: Ensure that installation practices are environmentally friendly, reducing wastage, managing emissions, and recycling materials where possible.
• Risk Assessment: Conduct risk assessments to identify and mitigate potential hazards on-site.
• Site Attendance: To attend everyday morning exercise and tool box meeting as per main con scheduled timing, conduct site walk to check and monitor site progress and arrange subcon workers and direct workers for necessary work to carry out.
• Permit Application: Apply Permit to Work (PTW) and other necessary permit such as Work at height, hot work, confined space, etc via main con NOVADE application platform.

8. Coordination of Multiple Trades

• Interfacing with Other Trades: Coordinate with other trade contractors (electrical, plumbing, civil) to ensure smooth progress and avoid conflicts between work activities.
• Sequencing Work: Ensure that ACMV installation is sequenced properly in relation to other trades and that all work is integrated effectively within the overall project.

9. Cost Control

• Material Management: Monitor material usage and inventory to avoid wastage and overstocking.

10. Post-Installation Support

• System Handover: Participate in the handover process, ensuring all necessary documentation and manuals are provided to the client.
• Defect Rectification: Oversee the rectification of any defects found after installation, ensuring they are addressed in a timely manner.

11. Training and Mentoring

• Team Training: Ensure the installation team is well-trained in the latest ACMV technologies, tools, and safety procedures.
• Mentorship: Provide guidance to junior staff and technicians on technical aspects and best practices of installation.

In summary, the ACMV Installation Site Coordinator is responsible for overseeing the complete installation process, from planning to execution and final handover, ensuring that everything runs smoothly, safely, and according to specifications. They serve as a central point of coordination between the project management team, contractors, engineers, and clients.

Requirements:

- Diploma or above in mechanical engineering or related qualifications

- Min 2 years on site experience

- Experience in BIM is an added advantage

- Strong independence and good communication in English

- Able to work 5.5 days week

Seeking individual with expertise in contract management and project costing, who are keen to develop modern digital skillsets and knowledge for quantity survey, data management and analysis of MEP / HVAC / ACMV systems to compete in the current global trend of sustainability and green endeavors.

Scope:

1. Contract Management

a. Legal compliance

i. Alternate Dispute Resolution (ADR)

- Introduction and exposure to Adjudication, Arbitration and Contract negotiations.

ii. Extension of Time (EOT)

- Review contractual implications

- Differentiate EOT and liquidated damages (LD), assess considerations and resolutions.

iii. Collaborative Contracting

- Introduction to collaborative contracting processes.

b. Contract Agreement (Main Contract/Sub Contract)

- Ensure contract terms are reviewed and understood

- Verify all necessary approvals are obtained

- Maintain records of communication and modifications

- Safe keep of contract agreement in Google shared drive and eCabinet.

2. Project Costing

a. Software application

i. PDF X-change Editor

- For manual quantity take-off and check.

ii. Glodon Internation (TMEC/TBQ)

iii. Autodesk Revit/CAD

b. Procurement

i. Assist in procurement process and regular review for efficiency.

ii. Sourcing of Subcontractors/Suppliers for services/products

iii. Negotiation

iv. Price Analysis

c. Budgeting and Control

i. Project cost assessment

ii. Variation Order (VO) cost (Budgeted / Non-Budgeted)

- Process of managing variation orders

- VO cost assessment

3. Project Closure

a. Payment Certification

i. Security of Payment Act (SOPA)

ii. PSSCOC/SIA

b. Variation Order (VO)

i. Preparation / Submission of VO

ii. Assessment / Evaluation of VO

- Manage addition and omissions, instruction, changes in quantity/design/requirements.

- Assess and evaluate subcontractor VO

- Application of appropriate SOR

- Negotiation

c. Final Accounts

i. Defects Liability Period (DLP)

- Ensure contract responsibilities and due diligence are well delivered.

ii. VO finalization

- Conclude VO and negotiation to close.

iii. Back Charges

Requirements

• Diploma or Degree in Mechanical Engineering, Electrical Engineering , Sustainable Infrastructure in Building Services, Quantity Surveying or equivalent /
• Experience in MEP / HVAC / ACMV is added advantage
• Experience in Data Analysis concepts is added advantage
• Knowledge in modern digital solutions like modelling take off software, RPA, advanced Excel / Google Sheets skills, utilising AI / ML are added advantage.
• Strong literacy in English and willing to learn in a changing industry.
• Interested candidates with MEP / HVAC / ACMV field experience are welcomed to apply.
• Fresh graduates welcomed to apply, training will be provided.

Advantages Remunerations

• 5 day work week.
• Progression-centric
• AWS included
• Variable Performance Bonus
• Annual Incentive Trip
• Further learning/education encouraged and sponsorships
• Flexible working hours and Work from home accepted on top of physical attendance
• Various Medical Benefits

Seeking individual with keen interest to develop modern digital skillsets and knowledge for quantity survey, data management and analysis of MEP / HVAC / ACMV systems to compete in the current global trend of sustainability and green endeavors.

Scope

• Reporting: Reporting to QS Manager
• Objectives: Participate in tendering process and to successfully bid for projects
• Quantity Survey: Collect data for management and analysis of cost estimation, budgeting, contract administration and procurement. (Individual Scopes follows below)
• Cost Estimation and Budgeting: Develop comprehensive and strategic cost estimates for tenders and projects, taking into account project specifications, current market rates, and labor costs. Prepare and present these estimates, transforming data into actionable insights and deliverables that meet tendering requirements and enhance the likelihood of successful bidding.
• Contract Administration: Work with Contract Manager to prepare and review contract documents, tender documents, and bills of quantities in accordance with the Building and Construction Authority (BCA) guidelines and Singapore's regulatory framework, ensuring strict compliance across work done.
• Procurement Management: Coordinate with suppliers, contractors, and/or consultants for the procurement of materials, equipment, and services, ensuring optimal cost efficiency and quality control.

Requirements

• Diploma or Degree in Mechanical Engineering, Electrical Engineering , Sustainable Infrastructure in Building Services, Quantity Surveying or equivalent /
• Experience in MEP / HVAC / ACMV is added advantage
• Experience in Data Analysis concepts is added advantage
• Knowledge in modern digital solutions like modelling take off software, RPA, advanced Excel / Google Sheets skills, utilising AI / ML are added advantage.
• Strong literacy in English and willing to learn in a changing industry.
• Interested candidates with MEP / HVAC / ACMV field experience are welcomed to apply.
• Fresh graduates welcomed to apply, training will be provided.

Advantages Remunerations

• 5 day work week.
• Progression-centric
• AWS included
• Variable Performance Bonus
• Annual Incentive Trip
• Further learning/education encouraged and sponsorships
• Flexible working hours and Work from home accepted on top of physical attendance
• Various Medical Benefits

Seeking individual with keen interest to develop modern digital skillsets and knowledge for quantity survey, data management and analysis of MEP / HVAC / ACMV systems to compete in the current global trend of sustainability and green endeavors.

Scope

• Reporting: Reporting to QS Manager
• Objectives: Participate in tendering process and to successfully bid for projects
• Quantity Survey: Collect data for management and analysis of cost estimation, budgeting, contract administration and procurement. (Individual Scopes follows below)
• Cost Estimation and Budgeting: Develop comprehensive and strategic cost estimates for tenders and projects, taking into account project specifications, current market rates, and labor costs. Prepare and present these estimates, transforming data into actionable insights and deliverables that meet tendering requirements and enhance the likelihood of successful bidding.
• Contract Administration: Work with Contract Manager to prepare and review contract documents, tender documents, and bills of quantities in accordance with the Building and Construction Authority (BCA) guidelines and Singapore's regulatory framework, ensuring strict compliance across work done.
• Procurement Management: Coordinate with suppliers, contractors, and/or consultants for the procurement of materials, equipment, and services, ensuring optimal cost efficiency and quality control.

Requirements

• Diploma or Degree in Mechanical Engineering, Electrical Engineering , Sustainable Infrastructure in Building Services, Quantity Surveying or equivalent /
• Experience in MEP / HVAC / ACMV is added advantage
• Experience in Data Analysis concepts is added advantage
• Knowledge in modern digital solutions like modelling take off software, RPA, advanced Excel / Google Sheets skills, utilising AI / ML are added advantage.
• Strong literacy in English and willing to learn in a changing industry.
• Interested candidates with MEP / HVAC / ACMV field experience are welcomed to apply.
• Fresh graduates welcomed to apply, training will be provided.

Advantages Remunerations

• 5 day work week.
• Progression-centric
• AWS included
• Variable Performance Bonus
• Annual Incentive Trip
• Further learning/education encouraged and sponsorships
• Flexible working hours and Work from home accepted on top of physical attendance
• Various Medical Benefits

Job Description
As a Design Engineer, you will report to the Senior Design Engineer and be responsible for the successful implementation and management of BIM processes in the construction field, specifically focusing on Building Services, Airconditioning, and Mechanical (M&E, ACMV) works. You will collaborate closely with the design department to ensure compliance with engineering and safety requirements and coordinate with stakeholders to maintain the integrity and accuracy of the BIM model throughout the project lifecycle.

Key Responsibilities

1. Construct and manage Building Information Models (BIM) with precision, ensuring the integrity and accuracy of all models. Ensure timely coordination and completion of tasks as assigned by the immediate superior.
2. Ensure all BIM models comply with project specifications and requirements.
3. Maintain and update the model library for all ongoing projects, ensuring that all data remains secure and is treated as company property.
4. Collaborate with project teams to collect site information for updating project BIM models.
5. Work closely with the Quantity Surveying department to provide drawings and information required for tendering, cost estimation, monitoring, and scheduling.
6. Coordinate with the BIM department to validate and confirm the accuracy of BIM designs.
7. Maintain, update, and manage hardware and software essential for the operation of BIM.
8. Assist in the creation of 2D AutoCAD drawings and ensure seamless integration between 2D and BIM models, bridging the gap between office and site operations.
9. Ensure all work conforms to the company’s ISO standards.
10. Support the submission of Operation, Maintenance, and Monitoring (OMM) manuals and media presentations using BIM models.
11. Follow the company's responsibility and authority matrix in the execution of duties.
12. Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes and standards, such as Singapore Code of Practice (CP13), SS553, and the Fire Code.
13. Utilize design software to perform thermal load calculations, energy modelling, and system sizing.
14. Prepare design documents including system layouts, schematics, and specifications.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Overview:

• Report directly to the Project Manager, managing ACMV works within the built environment.
• Ensure project management aligns with engineering and contractual requirements.
• Collaborate with the design department to ensure compliance with engineering and safety standards.
• Oversee contracts, costs, schedules, coordination, and overall project completion.

Key Responsibilities:

1. Manage projects from concept to completion, including planning, scheduling, budgeting, and stakeholder coordination.
2. Implement and oversee Project Quality Plan, Safety Management Plan, and Building Execution Plan.
3. Develop, maintain, and manage the BIM model and project documentation (drawings, specifications, reports).
4. Liaise with clients to meet their requirements and ensure project scope, schedule, and budget compliance.
5. Address and resolve technical or contractual issues during the project lifecycle.
6. Oversee the construction process to ensure timely, budget-compliant, and high-quality completion.
7. Coordinate with consultants, contractors, and ensure contractor performance.
8. Manage project handover to the client, ensuring compliance with all relevant Singapore regulations and standards.
9. Promote and manage safety activities and compliance inspections.
10. Obtain necessary permits and approvals and work with authorities to minimize public disruption during construction.
11. Ensure sustainability and environmental friendliness of the project.

Preferred Experience:

• Experience in healthcare facilities (hospitals, labs, operating theatres).
• Experience in commercial or industrial buildings (warehouses, factories).
• Experience with government projects and data centers.

Requirements:

• Degree in Mechanical Engineering, Building Services, Project Management, or a related field, with ACMV project experience preferred.
• Graduates with a degree in Sustainable Infrastructure are encouraged to apply.
• Bizsafe Level 2 safety certification or higher preferred.
• Minimum 3 years of experience in related fields preferred, though fresh graduates are welcome to apply.
• Proficiency in English (written and spoken).
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM and a valid driver's license are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Overview:

The Assistant Project Engineer will report directly to the Project Manager and manage ACMV (Air-Conditioning and Mechanical Ventilation) works within the built environment. The role involves ensuring that all project activities comply with engineering and contractual requirements. This position requires collaboration with the design department to meet engineering and safety standards, while overseeing contracts, costs, schedules, and overall project completion.

Key Responsibilities:

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Support the development and maintenance of the BIM model, ensuring it is accurate and up-to-date.
• Assist in the preparation and management of project documentation, including drawings, specifications, and reports.
• Collaborate with the client to help meet their requirements under the guidance of the Project Engineer
• Assist in verifying changes to project scope, schedule, or budget, ensuring compliance.
• Help in resolving technical or contractual issues that arise during the project, with the support of the senior team.
• Provide assistance in managing the construction process to ensure it progresses on time, within budget, and meets quality standards.
• Support monitoring the performance of contractors, ensuring they meet their obligations.
• Coordinate with various consultants and contractors, under the guidance of the Project Engineer.
• Assist in the handover process of the project to the client.
• Comply with all relevant Singapore regulations and standards under the supervision of senior project staff.
• Promote safety management activities and assist in compliance inspections.
• Assist in obtaining necessary permits and approvals.
• Support sustainability efforts and ensure the project adheres to environmental standards.
• Help minimize disruption to the public during construction by coordinating with authorities.

Requirements:

• Diploma or Degree in Mechanical Engineering, Building Services, Project Management, or a related field. ACMV project experience is preferred.
• Bizsafe Level 2 safety certification or higher preferred.
• A minimum of 1 year of experience in a related field is preferred, though fresh graduates are welcome to apply.
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Career development focused on progression and growth.
• AWS included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.

Report to BIM, Project Engineer / DfMA Manager.

Scope of assist in maintaining product quality within the factory.

Collaborate with the team to meet quality standards and objectives.

Maintain records of quality control activities.

Work closely with suppliers and vendors to ensure quality compliance.

Assist in quality investigations and problem-solving.

Participate in training and development opportunities to enhance you skills

Requirements:

Diploma or above in mechanical engineering or related qualification

Knowledge in both M&E services and DfMA Principles, Familiarity with QA/QC process, tools and techniques. Knowledge in Industry Standards. Knowledge in BIM is an added advantage.

Strong independence and good communication in English

Able to work 5.5 days week

Fast progression position

Progression-centric

AWS included

Variable Performance Bonus

Annual Incentive Trip

Further learning/education encouraged and sponsorships

Flexible working hours and Work from home accepted on top of physical attendance

Various Medical Benefits

• Prepare and submit technical shop drawings for approval.
• Project Management and site supervision of the Installation and Commissioning of Air-Conditioning and mechanical ventilation works at Residential and Commercial Building.
• Planning and Design of M&E and Air-Conditioning works
• Attend site meeting, site inspection with sub-contractor and consultants.
• Modify the M&E Drawing According to Site Condition.
• Conduct the testing & commissioning of ACMV system.
• Managed the supervisor and workers to complete within limited time.
• Prepare monthly project progress claim/ progress report.
• Estimating and predicting the cost of tenders.
• Working experience in Air-conditioning/Chilled Water system and Mechanical Ventilation

-Conduct sales call and visits to seek business opportunities with prospective customers
-Preparation of quotations and proposal for clients
-Responsible for achieving sales targets and growth
-Responsible for ensuring and maintaining high customer satisfaction
-Participate in corporate sales planning and strategies
-Attend to customers’ queries, site meetings and carry out site survey whenever required
-Liaise closely with Operation team to ensure job requirement are met
-Monthly sales reporting to Management
-Any other ad-hoc duties

Scope Summary:

• Managing the production of prefabricated MEP modules in a factory setting
• Ensuring quality control and compliance with standards and specifications
• Coordinating with design teams, contractors and suppliers
• Supervising the delivery and installation of MEP modules on site
• Troubleshooting any issues or defects that arise during or after assembly

Detailed Scope:

1. Manage Prefabrication Factory/Yard reporting to Project Director, overseeing prefabrication production of MEP modules and manpower planning.
2. Ensure that MEP design and construction processes are in line with the latest developments in technology and software, such as Building Information Modeling (BIM). Keep abreast of the latest technological developments and advancements in the MEP industry, and identify opportunities for innovation and improvement in the production process.
3. Develop and implement processes and procedures that are compliant with industry standards and best practices, including those set by the Building and Construction Authority (BCA) and other relevant regulatory bodies. Implement Building Information Modelling (BIM) to Field technology, which involves the use of 3D modelling software and mobile devices to facilitate communication and collaboration between the design team and the production team.
4. Stay up-to-date with the latest technological developments in MEP design and construction, including automation, prefabrication, and modular construction techniques.
5. Develop and implement strategies for the use of technology and digital tools, including BIM software, to improve the efficiency and accuracy of MEP design and construction processes.
6. Ensure that all MEP design and construction activities are carried out in accordance with relevant safety and environmental regulations and standards.
7. Collaborate with other stakeholders, including architects, engineers, and contractors, to ensure that MEP systems are integrated seamlessly into the overall building design and construction process.
8. Develop and implement training programs to ensure that all relevant stakeholders, including MEP design and construction teams, are up-to-date with the latest technological developments and best practices. Develop and implement training programs for employees to ensure that they have the necessary skills and knowledge to work with new technologies and methods.
9. Implement quality control and quality assurance measures to ensure that MEP systems meet the highest standards of quality and performance.
10. Develop and implement processes and procedures to ensure that MEP systems are delivered on time and within budget.
11. Monitor and report on the performance of MEP systems, using data analytics and other tools to identify areas for improvement and optimize performance.
12. Develop and maintain strong relationships with suppliers, contractors, and other stakeholders in the MEP design and construction process.
13. Stay up-to-date with the latest developments in sustainability and green building practices, and ensure that MEP systems are designed and constructed with sustainability in mind.
14. Ensure that all MEP design and construction activities are carried out with the highest levels of professionalism and ethical standards.
15. Develop and implement processes and procedures to ensure that MEP systems are tested and commissioned to the highest standards, and that all relevant documentation and certification is in place.
16. Ensure that all MEP design and construction activities are carried out in compliance with relevant laws, regulations, and codes of practice.
17. Maintain accurate and up-to-date records of production processes and outcomes, and use data analytics and other tools to monitor and optimize performance.
18. Foster a culture of continuous improvement and innovation within the organization, encouraging employees to identify opportunities for improvement and to share their ideas and insights with the broader team.
19. Establish and maintain partnerships with technology providers and other industry stakeholders to leverage their expertise and resources in the development and implementation of new technologies and methods.
20. Implement Lean Management principles, which involve the optimization of processes and the elimination of waste, to improve productivity and efficiency in the production process.
21. Implement Integrated Digital Delivery (IDD) methods like IOT implementation, which enable the seamless sharing of information and data between different stakeholders in the construction process, including architects, engineers, contractors, and facility managers.

Requirements

• Degree in Mechanical engineering and related specialist diploma in DFMA, SDCP or BIM
• Safety certified, minimum Bizsafe level 2
• 3 years or more working experience in related fields preferred
• Good language capability (English) both in written and spoken
• Strong independence and leadership in teamwork environment.
• Fresh graduate may apply.
• Knowledge in BIM and experiences in MEP prefabrication are added advantage

Advantages / Remunerations

5 day work week.

Progression-centric

AWS included

Variable Performance Bonus

Annual Incentive Trip

Further learning/education encouraged and sponsorships

Various Medical Benefits