Working in fab enviroment, doing troubleshooting and maintenance for the machining. (Scrubber machining), provide solutions for customer in the event machine is alarm or down.

At least a diploma in mechanical, electrical or mechatronic engineering field.

- able to work in a hot enviroment

- Able to support after office hours if needed

-Midnight standby is needed (transport allowance provided)

-Able to wear jumbsuit if needed

-Prefer multilingual in Singapore context with good communication skill

-Only singaporean

Duties & Responsibilities:

· Manning of specified craft and/or any other crafts

· Upkeep the craft in good, clean and tidy conditions

a) Engines to be checked

b) Interior and exterior to be washed and cleaned

c) Reporting of any faults

· Assisting of any offer on general works as and when required.

Requirement:

· MPA Helmsman /Steersman (Port Limit) / MPA SR license or equivalent

· Pass an approved eyesight test

· Enjoy working outdoors

· Able to work irregular and long hours

1. To produce shop and installation drawing

2. To select and procure equipment and material

3. To provide technical solution for site installation work

4. To supply labour to carry out the actual installation work of the whole air-con ducting system

5. To perform Testing and Commissioning of the completed system

6. To handover the completed system to client

Duties and Responsibilities:

• Diagnose technical issues reported by customers through phone, email, or ticketing systems, providing remote troubleshooting and guidance.
• Schedule and coordinate service visits and appointments with customers, ensuring efficient use of time and resources.
• Perform equipment installations, upgrades and preventive maintenance activities according to manufacturer specifications and service agreements.
• Test equipment functionality and performance after repairs or installations, ensuring compliance with quality standards and safety regulations.
• Provide training and technical assistance to customers and end users on equipment operation, maintenance procedures and troubleshooting techniques.
• Communicate effectively with customers, explaining technical concepts and solutions clearly and concisely.
• Escalate complex or unresolved issues to senior engineers or management for further investigation and resolution.
• Stay updated on product developments, technical advancements and industry trends to maintain expertise and provide proactive support.
• Responding to customer service requests, diagnosing equipment problems and providing timely and effective solutions.
• Performing on-site repairs, maintenance and installations of equipment and machinery.
• Conducting preventive maintenance checks and routine inspections to identify potential issues and ensure equipment reliability.
• Collaborating with internal teams, including sales, engineering and product development, to address customer needs and provide technical assistance.
• Documenting service activities, including service reports, repair logs and customer communication, to maintain accurate records and ensure traceability.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for QC/LAB Equipment Validation Engineers to join us on a permanent basis to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Looking for candidates with 3-5 years QC/Lab Equipment Validation experience.
• Provide technical support to run and validate necessary test methods on lab equipment and in developing method transfer/validation protocols and reports.
• Perform qualification and validation for in process, release and stability equipment (HPLC, UV, TOC, pH, etc).
• Manage day-to-day Quality Control/LAB Validation activities in accordance with approved Project Plans and Policies for a fast-paced brownfield project.
• Help with lab system validation, develop and oversea system qualification
• Review and Approve C&Q plans/protocols/reports and GxP SOPs/records
• Review validation life-cycle documents during the commissioning, qualification (IQ/OQ), and validation (PQ) phase e.g., pre and post-execution commissioning/ qualification plans and test specifications, validation summary reports & etc.
• Ensure that documents are in compliance with quality standards and applicable regulatory requirements
• Review engineering change control to evaluate the validation/quality impact(s).
• Support in the resolution of validation deviations and approval.
• Participate in the qualification coordination meeting to ensure correct event sequence in compliance

If you'd like to find out about this opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Job Description:

• Responsible in preparing documentation including daily report, monthly progress report, method of statement and work procedure to project manager.
• Responsible in overseeing drawing management and make sure the updated drawings to the clients and subcontractor are issued.
• Assist the project manager or senior project engineer in coordinate with related consultant and quantity surveyor on the change order issued
• Coordinate and work closely with safety personnel to ensure all government and safety regulation are complied.
• Conduct weekly or monthly meeting with sub-contractors to update the progress of work.

Job Requirements:

• Good interpersonal and communication skill
• Good organization skill
• Able to multitask
• Able to work under fast paced environment

· Able to study project schedule and plan site works on a daily basis

· Ensure works are carried out according to schedules and are on target to completion.

· Implement carpentry works and inspections.

· Reports any defects/non-compliances to Project manager.

· Minimum 10 years of working experience in construction site especailly for RC works

· Experience of medium/large projects for MRT

· Conversant in statutory code and requirements

Join Our Dynamic Team as a Senior Project Engineer!

Are you an experienced engineer with a passion for innovation and a track record of excellence? Do you thrive in dynamic environments where your expertise can drive impactful change? If so, we invite you to take your career to the next level with us!

We are seeking a highly skilled Senior Project Engineer to join our team and lead our mission of innovation and excellence. As a Senior Project Engineer, you will play a pivotal role in managing and executing a variety of projects across different facilities. You will collaborate with a team of dedicated professionals, leveraging the latest technologies and your extensive experience to deliver outstanding results.

Key Responsibilities:

• Work closely with Project Managers to plan and manage projects effectively, ensuring seamless execution and alignment with technical and engineering requirements.
• Collaborate with main contractors and consultants to diligently track work progress and adherence to the project schedule, ensuring engineering specifications and standards are met.
• Facilitate communication with subcontractors and suppliers, meticulously prepare all project costs, process claims, and monitor budgets to ensure financial efficiency and compliance with engineering requirements.
• Attend site meetings and perform detailed site inspections to ensure project milestones are met and technical standards are upheld.
• Oversee the daily activities of subcontractors, ensuring strict adherence to job site safety policies and procedures, with a focus on engineering safety standards.
• Monitor and inspect work progress, maintaining rigorous quality control and assurance standards, and promptly address any engineering issues that arise.
• Work closely with the team to meet all requirements and expectations during testing and commissioning with consultants, ensuring successful project outcomes that meet engineering criteria.
• Prepare and review technical documentation, reports, and specifications to ensure clarity and accuracy throughout the project lifecycle.
• Identify potential risks and develop mitigation strategies to ensure project objectives are achieved without compromising safety or quality.
• Aid the Project Manager and team in the efficient closure of projects, including the handover process, OMM, and as-built documentation submission, ensuring all engineering documentation is accurate and complete.
• Ensure the proper upkeep of documents and efficiently upload them to the server for organized record-keeping, maintaining the integrity of all engineering records.
• Participate in post-project reviews to identify lessons learned and recommend improvements for future projects.

Qualifications:

• Diploma / Bachelor's degree in Engineering or related field
• Excellent problem-solving skills and analytical thinking
• Effective communication skills with the ability to collaborate in a team environment
• Commitment to maintaining high standards of safety and quality.
• High adaptability
• Minimum of 3 years of experience in a related field.
• Proven experience in project management and execution.

Why Join Us:

• Opportunity to work on innovative projects that make a real impact
• Collaborative and supportive team environment with mentorship opportunities
• Continuous learning and professional development opportunities
• Competitive compensation and benefits package
• Exciting company culture with team outings, events, and more

Working Experience And Skill Requirement IT Programmer

a. Must be able to speak and write English proficiently;

b. Have at least three (3) years' post graduate experience working with Personal computers or compatibles;

c. Have at least three (3) years' post graduate experience using MS OS such as Windows 7 or higher and Microsoft Outlook;

d. Able to conduct unit, module, functional and volume testing; to analyze test results and to take corrective action.

For Java Requirement

The Programmer shall be required to:

a. Have three (3) years’ experience, within the past four (4) year’s timeframe, in each of the programming skills: - JSP,

- Servlet,

- Java Bean,

- Java Script,

- Session management

- JDBC, SQL

b. Have two (2) years’ experience, within the past three (3) year’s timeframe, in coding programs using each of the skills:

- HTML 5

- XHTML

- AJAX

- Web Services (REST API)

- JSON

- Java Server Faces

- EJB (session, entity & message, Service Locator, Business Delegate, Data Transfer Object, Data Access Object),

c. Preferably have hands on experience on the following: - IBM RAD9.0 or above or Eclipse or equivalent

- Portal and Portlet development

- n-Tier Architecture

- Java Web Security/LDAP

- JEE Security

- JEE Transaction

- XML

- Web Services (SOAP)

- JNDI

- UML diagrams

- Secure coding to prevent application vulnerabilities (for eg. Cross-site scripting; Injection vulnerability flaws such as SQL injection, command injection; Race conditions; Improper error / exception handling, etc)

The Programmers shall be required to:

i. Code, modify, test, correct and document new and existing programs using assigned languages, tools and coding conventions;

ii. Prepare and document test data;

iii. Prepare and set up testing and production environment;

iv. Prepare and maintain program and system documentation;

v. Assist in establishing file structures and processing logic requirements;

vi. Produce deliverables according to group standards and procedures;

vii. Assist Project Leaders in the study and design of application systems and work coordination, project management and user training work;

viii. Troubleshooting and supporting end-users in the implementation and maintenance of application systems;

ix. Train other contract programmers in the relevant skills;

x. Participate in Disaster Recovery activities eg simulation exercise at Disaster Recovery sites;

xi. Learn / pick up new programming skills related to System Development and Maintenance as assigned by the supervisors;

xii. Any other tasks related to System Development and Maintenance as assigned by the supervisors.

Working Experience And Skill Requirement IT Programmer

a. Must be able to speak and write English proficiently;

b. Have at least three (3) years' post graduate experience working with Personal computers or compatibles;

c. Have at least three (3) years' post graduate experience using MS OS such as Windows 7 or higher and Microsoft Outlook;

d. Able to conduct unit, module, functional and volume testing; to analyze test results and to take corrective action.

For Java Requirement

The Programmer shall be required to:

a. Have three (3) years’ experience, within the past four (4) year’s timeframe, in each of the programming skills: - JSP,

- Servlet,

- Java Bean,

- Java Script,

- Session management

- JDBC, SQL

b. Have two (2) years’ experience, within the past three (3) year’s timeframe, in coding programs using each of the skills:

- HTML 5

- XHTML

- AJAX

- Web Services (REST API)

- JSON

- Java Server Faces

- EJB (session, entity & message, Service Locator, Business Delegate, Data Transfer Object, Data Access Object),

c. Preferably have hands on experience on the following: - IBM RAD9.0 or above or Eclipse or equivalent

- Portal and Portlet development

- n-Tier Architecture

- Java Web Security/LDAP

- JEE Security

- JEE Transaction

- XML

- Web Services (SOAP)

- JNDI

- UML diagrams

- Secure coding to prevent application vulnerabilities (for eg. Cross-site scripting; Injection vulnerability flaws such as SQL injection, command injection; Race conditions; Improper error / exception handling, etc)

The Programmers shall be required to:

i. Code, modify, test, correct and document new and existing programs using assigned languages, tools and coding conventions;

ii. Prepare and document test data;

iii. Prepare and set up testing and production environment;

iv. Prepare and maintain program and system documentation;

v. Assist in establishing file structures and processing logic requirements;

vi. Produce deliverables according to group standards and procedures;

vii. Assist Project Leaders in the study and design of application systems and work coordination, project management and user training work;

viii. Troubleshooting and supporting end-users in the implementation and maintenance of application systems;

ix. Train other contract programmers in the relevant skills;

x. Participate in Disaster Recovery activities eg simulation exercise at Disaster Recovery sites;

xi. Learn / pick up new programming skills related to System Development and Maintenance as assigned by the supervisors;

xii. Any other tasks related to System Development and Maintenance as assigned by the supervisors.

We are hiring a project manager for construction projects involves several key responsibilities to ensure project success. These responsibilities include:

1. Planning and Coordination: Developing detailed project plans, timelines, and budgets. Coordinating with various stakeholders, including clients, contractors, subcontractors, and suppliers.
2. Resource Management: Overseeing the allocation of resources, including manpower, materials, and equipment, to ensure the project is completed on time and within budget.
3. Risk Management: Identifying potential risks and developing strategies to mitigate them, ensuring that the project stays on track and within regulations.
4. Communication: Serving as the main point of contact for all parties involved in the project, facilitating clear and effective communication to avoid misunderstandings and delays.
5. Quality Control: Ensuring that construction meets necessary quality standards and complies with local building regulations and safety codes.
6. Budget Management: Monitoring project expenditures and ensuring that the project remains within financial limits while making adjustments as necessary.
7. Problem-Solving: Addressing any issues that arise during the construction process, finding solutions, and making decisions that align with project goals.
8. Documentation: Maintaining thorough documentation of project progress, changes, and communications to ensure transparency and accountability.
9. Liaising with Government Authorities: Facilitating approvals and inspections from relevant government bodies, complying with Singapore's construction regulations.

Overall, a project manager in construction plays a vital role in ensuring that projects are completed efficiently, safely, and to the satisfaction of all stakeholders involved.

• To perform setting-out of survey points and levels at building construction sites
• To perform land surveys / measurements using a variety of technical equipment
• Responsible for verification of accuracy of survey work on site and data collected
• To provide survey reports and liaise with relevant parties
• To co-ordinates work on-site with relevant parties

Job Description:

• The Fire Protection Systems Engineer will support the Project Manager in various tasks related to designing, coordinating, and overseeing the installation of fire protection systems for commercial projects. This role will involve working closely with drafters, sub-contractors, and the project management team to ensure installations comply with industry standards and project specifications.

Essential Duties and Responsibilities:

1. Assist in Designing Fire Protection Systems:
   Collaborate with drafters to design effective and compliant fire protection systems for commercial projects, ensuring alignment with safety codes and regulations.
2. Review Code of Practices:
   Ensure that the relevant fire protection installation codes and practices meet industry standards and legal requirements.
3. Coordinate Subcontractors' Site Installation:
   Work with subcontractors to ensure fire protection systems are installed according to project specifications, schedule, and safety guidelines.
4. Attend Meetings with Main Contractors:
   Participate in meetings with main contractors to discuss project progress and coordination.
5. Assist in Preparing Variation Claims:
   Support the Project Manager in preparing variation claims.
6. Submit Method Statements and Project Schedules:
   Assist in preparing method statements and project schedules for fire protection system installations. Ensure all necessary documentation is submitted on time for approvals.
7. Quality Checks and Analysis:
   Conduct quality checks to ensure installations meet all required standards and are free of defects.

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

The proposed personnel shall have minimum two (2) years of experience in the supervision of works similar in nature to the Works in the Civil Contract.

He/she shall have experience in supervising installation and monitoring of geotechnical instrumentation.

The proposed personnel shall have a diploma in the civil/structural discipline or National Certificate in Construction Supervision (NCCS) or equivalent and shall be accredited by JAC of IES/ACES as QSS.

The QSS shall meet the required minimum hours of work per month (Base Monthly Work Hours) which shall be computed based on the normal working hours for the week (forty-four (44) hours a week).

Work area -West side

• Oversee and keep track of project progress and identify possible delay events with mitigations solution such as re-sequencing of work etc
• Lead the construction team for all site activities
• Plan ahead and lead /coordinate all subcontractors
• Coordinate with Site Safety Team to ensure compliance with workplace safety regulations
• Review and comment subcontractor’s construction plans and programs
• Present to Client and Consultants for weekly report, site progress and planning
• Liaise with Clients, Consultants to resolve site issues

Job Requirements:

• Degree in Architecture/ Civil/ Structural Engineering or equivalent
• At least 15 years of relevant site experience for building projects with structural steel and precast, inclusive of projects with similar scale & complexity
• Familiar with Singapore Codes and Practices
• Candidate who experience in the construction/management of the following is preferred
• 50m lap pool of more than 1.2m depth
• local experience with deep excavation (6m or more)
• long span structural steel (30m or more)
• pedestrian Overhead Bridge
• projects along water courses, including waterways or water bodies
• sport and recreation facilities and/or institution projects
• Location : Punggol (Near MRT)
• Project : Sports Centre

Job Responsibilities :

• Formulate and develop Company’s safety policy and procedures
• Assist and enforce sites to implement site health and safety plans
• Perform health and safety audits on sites
• Conduct periodic health and safety training for site personnel
• Maintain Company's health and safety statistics and records
• Liaise with Government Agencies on health and safety issues, application of factory permit and other safety statutory requirements for compliance by sites
• Investigate all accidents which occur and recommend appropriate health & safety measures to prevent their occurrence
• Assist Senior Project Manager / Project Manager on all site safety matters
• Ensure the Occupational Health Safety management programme are effectively implemented and maintained
• Conduct and plan safety training awareness programme

Job Requirements :

• Diploma / Degree in Occupational Health and Safety, Engineering or a related field
• Minimum 5 years relevant working experience in construction industry
• Possess a valid registration with MOM as Workplace Safety and Health Officer (WSHO)
• Independent with good communication skills
• Possess ECO Certificate (NEA)
• Familiar with Government Regulations relating to Occupational Safety, Health and Environmental
• Certificate in WSQ Specialist Diploma in Workplace Safety & Health level C
• HDB Experience required
• 6 days work week from 8.00am to 5.00pm

1. Responsible for I&C engineering related matters.
2. Communicate and coordinate with team and all related stakeholders for planning and scheduling to facilitate smooth commissioning at site.
3. Ensure instrument and control elements installation and wire termination are done correctly and within acceptable standard of workmanship.
4. Enforce PSE and MEP to rectify any substandard works to ensure good quality of works for reliable operation.
5. Lead on-site testing and commissioning of chilled water control system, conduct thorough testing, and validation of control system to ensure proper functionality.
6. Documentation and records of T&C.
7. Handover control system to operation team in timely manner.
8. Respond to operational needs, ensure reliable control and monitoring of control system.
9. Configuration and zeroing of instrument, ensure accurate reading received at control system.

Overview

As a WSH Coordinator, you will assist the Project Manager in the daily operation of executing the company’s safety regulations and practices in the workplaces.

Responsibilities

1) Assist WSH Officer on safety and health matters.

2) Execute appropriate safety measurements in accordance with the Workplace Safety & Health Act.

3) Liaise closely with Project Managers, main contractors, contracts and authority, etc. on all safety and health issues.

4) Assist in accident / incident reporting and investigations as well as hold toolbox meetings and all WSH matters execution.

5) Perform daily inspection to ensure compliance to prevailing MOM regulations and Company Construction work policies.

6) Coordinate and maintain records of safety orientation and daily toolbox meetings.

7) Ensure safe work practices are adhered to by all parties in the daily site activities.

8) Perform daily inspection to ensure compliance and inform Project Manager accordingly.

9) Attend to all feedback on safety irregularities and inform the WSH Officer accordingly.

10) Ensure all safety legislation and in-house safety rules and regulations.

11) Ensure all parties at work are following the safe work procedures compliance.

12) Assist Project Manager to liaise with relevant authority visiting / complain or feedback, if necessary.

Requirements

1) At least a Professional certificate / Nitec or equivalent.

2) Must possess at least an Advance Certificate in Workplace Safety and Health by BCA (Level B).

3) At least 1 years of working experience in construction industry.

4) A good team player with good communication skills and multi-tasking.

5) Able to write and speak in English and Mandarin as need to liaise with Chinese Client and workers.

6) Computer literate with MS Word, Excel, PowerPoint, etc.

7) Physically Fit, healthy, hardworking and can work on weekends.

Overview

As a WSH Supervisor, you will assist the WSH Coordinator in the daily operation of executing the company’s safety regulations and practices in the workplaces.

Responsibilities

1) Execute Permit-to-work system according to WSH construction regulations.

2) Assist in accident / incident reporting and investigations.

3) Coordinate and maintain records of safety orientation and daily toolbox meetings.

4) Ensure safe work practices are adhered to by all parties in the daily site activities.

5) Attend to all feedback on safety irregularities and inform the WSH Officer accordingly.

6) Ensure all safety legislation and in-house safety rules and regulations.

7) Ensure all parties at work are following the safe work procedures compliance.

Requirements

1) At least a GCE O Level / SPM.

2) Must possess at least a WSQ Supervise Construction Work for WSH.

3) At least 1 years of working experience in construction industry.

4) A good team player with good communication skills and multi-tasking.

5) Able to write and speak in English and Mandarin as need to liaise with Chinese Client and workers.

6) Basic computer literate with MS Word, Excel, PowerPoint, etc.

7) Physically Fit, healthy, hardworking and can work on weekends.

Duties & Responsibilities:

• Look into the company’s BIM Project Deployment Plan and develop BIM Project Execution Plans, BIM collaboration, documentation, enforcement, monitoring and workflow to meet the project.
• Work closely with project teams to provide solutions for BIM related technical issues. Assist project teams and design teams with BIM implementation
• Set up processes & workflows for efficient delivery of the project BIM deliverables.
• Set guidelines for internal and external model exchanges between project stakeholders and monitor its progress
• Attend client meetings & lead the decision-making process affecting the BIM deliverables
• Liaise and coordinate and other trades for cross-team support on BIM software
• Regularly meet with key project staff to update on progress. Document meeting minutes highlighting key action point. Ensure the issues highlighted are resolved, concluded and monitored for resolution provided by the design team.
• To oversee the BIM Coordination and daily management of BIM project data sets/workflows and project set up
• Collaborate with team and other relevant departments to ensure all drawings are in order as per design requirements.
• Any other duties deemed necessary and as assigned by the Senior Management.

Qualifications & Experience:

• Certificate in AutoCAD Autodesk advanced module.
• Certificate in Revit MEP Autodesk advanced module.
• Higher NITEC / Diploma in Mechanical engineering or equivalent.
• Minimum 3 years of experience in M&E drafting using AutoCAD, Revit and BIM preferably from Construction industry.
• Outgoing personality with strong interpersonal and communication skills.
• Ability to work independently and target oriented in a stressful environment.
• Ability to work well in a team and demonstrate initiative and commitment.
• To be able to converse in English and work effectively with Internal staff including Site Foreman, Supervisors, Engineers, Managers and Client’s BIM representatives.

Project execution processes

Responsibilities:

1. Assist the Project Manager for the execution of awarded projects.
2. Co-ordinate with clients, consultants and main contractors on project plan and implementation.
3. Monitor and carry out quality check on progressive completed work and make recommendation for effective project management.
4. Inspect and evaluate on work performed by subcontractors.
5. Prepare project reports and check on updated drawing completion.

Requirements:

• Diploma / Degree in Electrical Engineering, Mechanical Engineering or related field.
• Preferable with minimum 1-3 years of working experience in M&E field.
• Ability to work independently and willing to travel based on the project site locally.
• Basic computer skills: Microsoft Office and Microsoft Project.
• AutoCad competency and possession of relevant safety certificates is an advantage.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Package Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

· Able to study project schedule and plan site works on a daily basis

· Ensure works are carried out according to schedules and are on target to completion.

· Implement carpentry works and inspections.

· Reports any defects/non-compliances to Project manager.

· Minimum 10 years of working experience in construction site especailly for RC works

· Experience of medium/large projects for MRT

· Conversant in statutory code and requirements

• Maintenance and Repairs: Perform routine maintenance and repairs on building systems, including ACMV , plumbing, electrical, and general infrastructure.
• Inspections: Conduct regular inspections to ensure building systems are functioning efficiently and safely.
• Troubleshooting: Identify and resolve mechanical and electrical issues.
• Coordination: Work with contractors and vendors for specialized maintenance tasks.
• Record Keeping: Maintain logs of maintenance activities, repairs, and inspections.
• Customer Service: Respond to tenant or management requests for building-related issues.