The Deputy Contracts Manager is responsible for all cost and contractual issues on Main contract as well as Sub-contracts connected to the project.

A summary of the responsibilities for this position is, and not limited to, as follows:

• Preparation of Monthly Progress claims, variation orders and payments to subcontractors
• Involve in managing and reporting of project budget & cost control
• Responsible in Post-Contracts administration for both the Main Contract and Subcontracts
• Monitor all financial aspects of the projects to ensure projects run according to budget
• Liaise and establish rapport with consultants, quantity surveyors, architects, developers and contractors on certification of claims for payment
• Be familiar with various stages of projects so as to source for the most viable yet reasonable priced materials
• Able to share new perspectives on cost, orders and claims
• With the understanding of the contractual legal rights, he/ she will be involved in advising the management on their position of the contract from the tender stage

Qualifications and Education Requirements

• Degree/Diploma in Quantity Surveying, Building or Civil Engineering
• Minimum 8 years working experience in tendering, estimating and measurement of quantities on projects worth at least $100 million
• Candidates with knowledge in Singapore Institute of Architects (SIA) Conditions of Contract, REDAS, FIDIC, FIDIC Short Form of Contracts will be an added advantage

Job Description & Requirements

Degree/ diploma in Civil Engineering/ Building Steel Structures and/or

related experience prefered

Liaise and coordinate with consultants, main contractor

Resolve all engineering, technical and project queries from time to time

Any other ad-hoc duties assigned related to project

Job Description

• Transporting earthwork from site to site
• Perform daily routine checks and maintain the general cleanliness.
• Drive in a safe manner at all time and adhering to traffic rules & regulations stated in the Road Traffic
• Ad-hoc duties

Requirements:

• Class 4 License
• Proven working experience & good driving record
• Familiar with Singapore route

Network Maintenance and Support: Perform routine maintenance tasks on network devices, including firmware updates, patches, and configurations. Troubleshoot and resolve network issues, ensuring minimal downtime. Monitor network performance and proactively address bottlenecks or anomalies.

Firewall Management: Configure, manage, and maintain Palo Alto and Check Point firewalls to ensure network security.
Implement and maintain firewall policies to control traffic and protect against threats.

Switch Management: Configure and manage Cisco switches, ensuring optimal performance and network segmentation.
Troubleshoot and resolve LAN/WAN connectivity issues.

Access Control and Authentication: Administer Aruba ClearPass Policy Manager (CPPM) for user authentication and access control.
Ensure compliance with security policies and standards.

Documentation: Maintain accurate and up-to-date network documentation, including diagrams, configurations, and asset inventory.

Collaboration: Collaborate with other teams, including system administrators and security experts, to achieve common network goals.

Security Compliance: Ensure that network configurations and policies comply with industry best practices and security standards.

*Needs to be on standby on Saturdays, Sundays, and public holidays to ensure a seamless network infrastructure.

* Successful candidates must be willing to work night shifts if required.

We are looking for skilled Electricians to perform electrical installations, maintenance, troubleshooting, and repairs for Power Plant and Oil & Gas projects. The ideal candidate will have strong technical knowledge, attention to detail, and a commitment to safety and compliance with Singapore MOM regulations.

Key Responsibilities:

1.Installation & Maintenance:

- Install, repair, and maintain electrical systems, including wiring, lighting, motors, transformers, and switchgear.

- Ensure proper grounding, earthing, and connection of all electrical components.

2.Troubleshooting & Repair:

- Diagnose and repair electrical faults in systems and equipment.

- Replace defective or worn-out parts, such as circuit breakers, fuses, and cables.

3.Testing & Inspection:

- Perform electrical testing, including insulation resistance and continuity tests, to ensure safe and efficient operation.

- Inspect electrical systems to identify hazards or areas needing improvement.

4.Safety & Compliance:

- Follow all safety guidelines, including proper use of personal protective equipment (PPE).

- Adhere to Singapore MOM regulations and workplace safety standards.

5.Documentation:

- Maintain accurate records of electrical work, including inspections, repairs, and test results.

Report to supervisors on project progress and any challenges encountered

Skills:

· Strong knowledge of electrical systems, equipment, and safety standards.

· Ability to read and interpret electrical schematics, blueprints, and manuals.

· Proficiency in using electrical testing tools like multimeters and insulation testers.

· Strong problem-solving and troubleshooting skills.

· Physical fitness and the ability to work in confined spaces and at heights

We are seeking a highly skilled 6G TIG & MIG Welder to perform high-quality welding work for Power Plant and Oil & Gas projects. The ideal candidate will have expertise in TIG (Tungsten Inert Gas) and MIG (Metal Inert Gas) welding processes, with the ability to weld in all positions, including the challenging 6G position. This role demands precision, attention to detail, and strict adherence to safety and quality standards.

Key Responsibilities:

1. Welding Operations:

- Perform TIG and MIG welding on various metals, including carbon steel, stainless steel, and alloys, in the 6G position.

- Prepare materials by cleaning, cutting, and shaping metal components before welding.

- Ensure proper alignment and fit-up of components for welding operations.

2. Inspection & Quality Control:

- Inspect welds to ensure they meet industry standards, project specifications, and client requirements.

- Perform visual inspections and assist in non-destructive testing (NDT) as required.

3. Blueprint Interpretation:

- Read and interpret blueprints, technical drawings, and welding symbols to determine welding requirements.

4. Safety & Compliance:

- Adhere to all safety protocols, including the proper use of personal protective equipment (PPE).

- Comply with Singapore MOM regulations, project safety requirements, and industry standards.

5. Equipment Maintenance:

- Operate and maintain welding equipment and tools in good working condition.

- Troubleshoot welding equipment issues and report malfunctions to the supervisor.

Requirements:

- Welding Certification (mandatory): Certification in Welding Technology or an equivalent welding certification that is recognized by industry standards, such as AWS, ASME, or ISO.

Experience:

· Minimum 5 years of experience as a TIG & MIG welder, with expertise in 6G position welding.

Prior experience in Power Plant or Oil & Gas projects is highly desirable

We are looking for a highly skilled Mechanical Supervisorwith a minimum of 5 years of experience in overseeing mechanical projects in Power Plant and Oil & Gas industries. The ideal candidate will be responsible for supervising the installation, maintenance, and repair of mechanical systems and equipment while ensuring compliance with safety regulations, quality standards, and project timelines.

Key Responsibilities:

1. Project Supervision:

- Plan, supervise, and coordinate mechanical work activities to ensure smooth execution.

- Manage and lead a team of mechanical fitters, technicians, and subcontractors to meet project objectives.

2. Installation & Maintenance:

- Oversee the installation, alignment, and maintenance of mechanical equipment, including pumps, valves, compressors, and piping systems.

- Review and verify technical drawings, specifications, and blueprints to ensure accuracy during execution.

3. Safety & Compliance:

- Ensure adherence to all safety protocols and MOM regulations on-site.

- Conduct safety briefings, toolbox meetings, and risk assessments for all team members.

4. Quality Assurance:

- Inspect completed work to ensure compliance with industry standards, project specifications, and client requirements.

- Address and resolve any quality-related issues promptly.

5. Team Management:

- Provide technical guidance, training, and mentorship to team members.

- Evaluate team performance and recommend improvements or additional training as needed.

6. Reporting & Documentation:

- Prepare and submit daily progress reports, manpower records, and inspection checklists.

- Communicate effectively with project managers, clients, and stakeholders to provide updates and resolve concerns.

Skills:

· Strong knowledge of mechanical systems, equipment, and tools.

· Proficiency in interpreting technical drawings, schematics, and manuals.

· Excellent leadership, communication, and organizational skills.

· Ability to troubleshoot and resolve complex mechanical issues efficiently.

·Familiarity with industry codes and standards, such as ASME, API, and ISO.

• Installation and Maintenance of Electrical and Mechanical Systems: Install, maintain, and repair electrical and mechanical systems, including motors, generators, HVAC systems, and other complex equipment across construction projects.
• System Integration: Collaborate with engineers and other technicians to integrate electrical and mechanical systems, ensuring compatibility and proper functioning across all areas of the project.
• Troubleshooting and Fault Diagnosis: Identify and troubleshoot issues in both electrical and mechanical systems, using specialized tools to analyze and repair problems related to wiring, circuit boards, and mechanical components.
• Blueprint and Technical Drawing Interpretation: Read and interpret electrical and mechanical blueprints, technical drawings, and schematics to ensure proper system installation and repairs.
• Safety Standards Compliance: Ensure all work is performed in compliance with safety regulations, electrical codes, and mechanical standards to prevent accidents and ensure a safe working environment.
• Performance Testing and Calibration: Conduct performance testing and calibration of electrical and mechanical systems to ensure they meet the required specifications and function efficiently.
• Collaboration with Project Teams: Work closely with engineers, architects, and other construction teams to ensure the proper design, installation, and integration of electrical and mechanical systems.
• Night Shift and After-Hours Support: Be available for night shifts or after-hours work to perform emergency repairs, conduct routine system checks, or ensure that critical systems are operational when needed.
• Preventative Maintenance: Perform regular maintenance on mechanical and electrical systems to prevent breakdowns and extend the life of equipment, following scheduled maintenance programs.
• Documentation and Reporting: Maintain detailed records of all maintenance, repairs, and installations carried out. Report any issues or progress to the management team, ensuring accurate documentation for future reference.

Job Description:

• In charge of design model and drawing submission
• To ensure drawing generated are in consistent with modelling design intent, view range, filters, settings correctly applied
• Development of BIM model and update comments
• Ensure design submission information exchange are carry out timely
• Review of Coordinated Combine Service Model (CCSM) models
• Involved in Virtual Design Conference on drawing on coordination and model development matters
• Ensuring that BIM model capture the required details with good accuracy
• Able to amend field end devices model family
• Able to generate Bill of Quantity from BIM models
• Input of Asset Information Model (AIM) to complete the as built model hand over

Job Requirement:

• Minimum ITE, Diploma / Degree in Building Information Modelling / Architecture/ Engineering with minimum of 3 years’ experience
• Must be able to work within tight deadline
• Those who are familiar with MRT Projects (Viaduct / Underground) or Expressway project preferred

We are looking for an Operations Executive - Security to oversee daily Visitor Registration Center (VRC) operations, including managing security systems, carpark management equipment, and access control. Additionally, you shall witness e-waste disposal and shredding exercises to ensure compliance.

Key Responsibilities:

• Supervise outsourced security staff and manage daily security operations.
• Operate and maintain security systems, including CCTV, alarm systems, and carpark management system.
• Manage Card Access and Facial Recognition System in creation and updating access credentials.
• Ensure proper functioning of the carpark management equipment and daily car park usage.
• Respond to any incident and breaches quickly and effectively.
• Oversee and witness e-waste disposal and shredding exercises to ensure safe and compliant handling of sensitive materials.
• Any other duties assigned.

Requirements:

• Possess a PLRD License
• Any qualification in security management or a related field.
• Minimum 3 years of experience in security operations.
• Experience with security systems, card access, carpark management, and e-waste disposal.
• Strong leadership, communication, and problem-solving skills.
• Ability to handle emergencies and work under pressure.

We are seeking a qualified and experienced Lifting Supervisor to oversee and manage lifting operations for Power Plant and Oil & Gas projects. The ideal candidate will ensure all lifting activities are carried out safely, in compliance with regulatory requirements and project specifications. This role requires strong technical expertise, attention to detail, and excellent communication skills.

Key Responsibilities:

1. Planning & Coordination:

- Plan and coordinate lifting operations, including selecting appropriate lifting equipment and techniques.

- Assess the load, rigging methods, and environmental conditions to ensure safe lifting procedures.

2. Safety Management:

- Supervise all lifting activities, ensuring strict adherence to safety protocols and MOM regulations.

- Conduct pre-lift safety checks, toolbox talks, and risk assessments before commencing operations.

3. Operational Supervision:

- Guide and oversee riggers, signalmen, and equipment operators during lifting operations.

- Ensure proper rigging, sling configurations, and load securing for all lifts.

4. Compliance & Documentation:

- Verify and ensure compliance with Singapore’s Workplace Safety and Health (WSH) guidelines.

- Maintain accurate records of lifting plans, permits, and inspection reports.

5. Incident Management:

- Address and resolve any safety concerns or operational issues on-site.

- Report and document any incidents, near-misses, or equipment malfunctions promptly.

Skills:

· Strong knowledge of lifting equipment, rigging techniques, and safety standards.

· Ability to interpret load charts, lifting plans, and risk assessments.

· Excellent leadership and team coordination skills.

· Good problem-solving skills to handle unforeseen challenges during lifting operations.

· Physical fitness and the ability to work in challenging environments.

This role requires highly cross functional interactions with key site functions to ensure success in production and release performance. Individual must be able to effectively communicate and collaborate closely with the team members and various SME to ensure equipment are operational to sustain daily operations, resolve operation challenges and implement effective measures to address the challenges to ensure without compromising on safety and compliance.

Location: Tuas

Salary up to $10000

1 Year Contract

Design & Project Engineering:

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule.
• Lead F&E to participate in technical transfer activities and cross-functional meetings.
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints.
• Effectively manage and work with project CQV team to ensure timely delivery of projects.
• Prompt updates or escalation of issues and challenges
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment.
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design.
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo.
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications.
• Work with project managers to complete design and engineering projects within schedule, budget and quality constraints.
• Develop technical solutions to complex problems requiring the regular use of ingenuity and creativity.

Daily Operations

• Accountability and ownership of assigned equipment
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Effectively communicate and collaborate with cross function stakeholders to address operational challenges and concerns to ensure sustained operation and minimal interruptions to operations activities.
• Lead and participate in equipment breakdown investigations to identify root causes. Effectively communicate to the customers on the subsequent plans, short term, and long-term mitigating actions.
• Collaborate closely with cross functional SME to implement effective corrective, preventive action and improvements to eliminate or mitigate future recurrence.
• Ensure operation continuity through asset lifecycle management planning, assess and identify impact to safety, compliance, operational schedule and cost.
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state.
• Accountable for deviation/change control associated to process equipment performance.
• Responsible for investigation of deviations, development of corrective and preventive actions
• and implementation of change controls in a timely manner.
• Support equipment readiness initiatives for New Product Introduction or Product Campaign Changeover
• Responsible for operation and reliability of Biotechnology process equipment and/or single use systems assigned.
• Apply process equipment knowledge to perform troubleshooting of equipment failures/malfunctions and the development of technical assessments during normal working hours and after hours when required.
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo.
• Apply knowledge of Operational Excellence practices such as lean maintenance to drive continuous improvement.
• Responsible for completion of process equipment periodic review, data integrity assessment and security assessment in a timely manner
• Collect, organize, analyze and present results for operational issues or engineering projects of various scale and complexity.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E EA License No. 01C4394 • EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

We are looking for an experienced E&I Technician to support the installation, maintenance, troubleshooting, and repair of electrical and instrumentation systems for Power Plant and Oil & Gas projects. The ideal candidate will have a strong background in both electrical and instrumentation systems, a solid understanding of industry standards, and the ability to work safely in complex environments.

Key Responsibilities:

Electrical Systems:

1. Installation & Maintenance:

- Install, maintain, and repair electrical systems, including power distribution, lighting, motors, and electrical panels.

- Inspect and test electrical systems to ensure compliance with safety and operational standards.

2. Troubleshooting & Repair:

- Diagnose and repair faults in electrical systems, including switches, circuit breakers, and wiring.

- Conduct preventive maintenance on electrical components to avoid downtime.

3. Wiring & Connection:

- Ensure correct wiring and connections for electrical circuits, following blueprints and schematics.

- Assist in the installation and commissioning of new electrical systems and equipment.

Instrumentation Systems:

1. Installation & Calibration:

- Install and calibrate instrumentation equipment, including flow meters, pressure sensors, temperature transmitters, and level sensors.

- Set up and configure control systems, including PLCs (Programmable Logic Controllers) and DCS (Distributed Control Systems).

2. Troubleshooting & Testing:

- Troubleshoot and repair instrumentation equipment to ensure accurate readings and safe operation.

- Perform calibration and adjustment of instruments to meet system specifications.

3. System Integration:

- Ensure proper integration of electrical and instrumentation systems within the control room or automation network.

- Assist in the configuration and maintenance of control panels and process control systems.

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
Office at Coleman St, The Adelphi, Singapore (City Hall), may need work at site
Salary: $5000 to $7500

Requirements
Minimum of 5 years of relevant site / construction experience.

Roles & Responsibilities

• To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
• To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
• To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
• To ensure that the related documentations are updated and ready for ISO audit.
• To cooperate with the safety department and carry out the assigned duties within the safety framework.
• Assist site management team in project Planning & coordination.
• Plan and schedule work sequences for construction operation.
• Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
• To study tender / construction drawings, specifications, and contracts to understand project requirements.
• Understanding of critical project criteria related to schedule & productivity.
• Able to provide guidance to new staff / junior staff.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Our client is from Construction Industry. They are looking for a WSH Officer to assist their Engineer team for the next phrase of their business. They are located Islandwide of Singapore– easily accessible. The WSH Officer is responsible for:

Duties

• Effectively lead the safety team and ensure the implementation of Workplace Safety & Health (WSH) Management Systems to minimize risks and accidents.
• Review and update all risk assessments to maintain compliance with WSH regulations and legal standards.
• Investigate on-site incidents and implement corrective measures to prevent recurrence.
• Ensure adherence to WSH Act provisions, enforce safety measures, and conduct regular inspections to ensure compliance among staff and subcontractors.
• Ensure the effectiveness of fire protection systems and emergency response management for the office and factory.
• Promote a strong safety culture through training, awareness campaigns, and employee engagement activities like drills and competitions.
• Liaise with statutory bodies, keep up to date on WSH regulations, and ensure compliance with waste management and licensing requirements.

Requirements

• Registered as WSHO with MOM
• Min 3 years of experience performing as a WSHO
• Relevant Qualification in Workplace, Safety and Health / Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Roles and Responsibilities

• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• Monitor compliance to applicable codes, practices, quality assurance (QA)/quality control (QC) policies, performance standards and specifications.
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status.
• Assign responsibilities and mentor project team.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Review engineering deliverables and initiate appropriate corrective actions.
• Attend meeting with client, when necessary.

Qualification Requirements

• Diploma/Degree in Engineering or relevant field.

Preferred Skills

• Proficient in AutoCAD and Microsoft Project.
• Proven working experience as a Project Engineer.
• Familiar with rules, regulations, best practices, and performance standards.
• Ability to work with multiple discipline projects.
• Project management and supervision skills.
• Decision making ability and leadership skill.
• Time management and organization skills.

We are seeking experienced Valve/Pump Fitters to join our team, specializing in the installation, maintenance, and repair of industrial valves and pumps for Power Plant and Oil & Gas projects. The ideal candidate will demonstrate strong technical expertise, a commitment to safety, and a proactive approach to maintaining equipment reliability in compliance with Singapore's Ministry of Manpower (MOM) safety standards.

Key Responsibilities:

1. Installation & Maintenance:

- Install, fit, and align industrial valves and pumps as per technical drawings and specifications.

- Conduct routine maintenance and servicing to ensure optimal performance of valves and pumps.

2. Repair & Overhauling:

- Diagnose faults and perform repairs on malfunctioning valves and pumps, including replacing parts such as seals, gaskets, and bearings.

- Overhaul and refurbish pumps and valves as part of scheduled maintenance.

3. Testing & Inspection:

- Perform pressure testing and flow testing to verify valve and pump integrity and functionality.

- Inspect equipment for wear, corrosion, or other issues that may impact performance.

4. Safety & Compliance:

- Adhere to all safety protocols, including proper use of PPE, and ensure compliance with MOM regulations.

- Identify potential hazards during operations and implement corrective measures.

5. Documentation:

- Maintain accurate records of installations, maintenance, and repairs.

- Provide detailed reports to supervisors and project teams.

Skills:

· Proficiency in reading and interpreting technical drawings and piping schematics.

· Strong troubleshooting and problem-solving abilities.

· Familiarity with precision tools such as micrometers and dial gauges.

· Excellent teamwork and communication skills.

· Physical fitness and the ability to work in challenging environments

We are seeking an experienced Millwright Fitter to join our team in supporting the installation, maintenance, and repair of mechanical equipment and machinery in Power Plant and Oil & Gas projects. The ideal candidate will have a solid understanding of mechanical systems, including alignment, fitting, and assembly, as well as a strong commitment to safety and quality standards.

Key Responsibilities:

1. Installation & Assembly:

- Install, align, and assemble mechanical systems, machines, pumps, compressors, turbines, conveyors, and other rotating equipment.

- Read and interpret blueprints, schematics, and technical drawings to ensure accurate assembly and installation.

- Use precision measuring instruments such as calipers, micrometers, and alignment tools for accurate fitting.

2. Maintenance & Repair:

- Perform preventive and corrective maintenance on mechanical equipment, machinery, and systems.

- Diagnose and troubleshoot faults in mechanical systems and equipment.

- Replace worn-out or defective parts, such as bearings, seals, and gaskets, to restore equipment functionality.

3. Fitting & Alignment:

- Fit and align components using hand tools, power tools, and measuring instruments.

- Ensure the proper alignment of shafts, couplings, and other rotating components to minimize wear and ensure efficient operation.

- Work with bearing, gear, and coupling assemblies to ensure proper operation.

4. Machining & Fabrication:

- Use lathes, milling machines, and grinders to modify parts, produce new components, or repair worn parts.

- Fabricate and weld components as required to complete repairs or modifications to machinery.

5. Safety & Compliance:

- Adhere to all safety protocols and procedures, including the proper use of personal protective equipment (PPE).

- Comply with project safety regulations and local industry standards (e.g., ISO, ASME, and other relevant codes).

- Ensure that work is completed in compliance with the project timeline and meets quality standards.

Skills:

- Proficiency in mechanical fitting, alignment, and installation of mechanical systems.

- Strong knowledge of mechanical equipment and machinery used in Power Plants and Oil & Gas sectors.

- Ability to interpret technical drawings, blueprints, and schematics.

- Familiarity with machine shop equipment (e.g., lathes, milling machines, grinders) and tools.

- Strong problem-solving skills and the ability to troubleshoot mechanical issues efficiently.

Job requirement and responsibilities:

1. Ensure all workplace policies & procedures are adhere

2. Construction Site working environment, station in container office on site

3. Oversee and coordinate all on-site activities

4. Coordination with the other internal departments like Design, Production & Procurement

5. Prepare work report submission to customer

6. Issue work order to factory and material request to procurement

7. Understand and fulfill customer requirements

Minimum requirement:

1. Tertiary degree in Engineering or equivalent

2. Min 3 years of working experience

3. Ability to read & interpret specification

4. Proficient in Microsoft Office

5. Dynamic and keen to learn

6. Able to work within a team

7. Good Communication & interpersonal skills

• Installation of Electrical Systems: Install electrical wiring, outlets, switches, circuit breakers, and other components as per the construction drawings and specifications.
• Troubleshooting and Maintenance: Diagnose electrical issues, repair or replace faulty wiring, circuit breakers, and electrical equipment to ensure proper functioning.
• Reading Blueprints and Schematics: Interpret electrical blueprints, schematics, and technical diagrams to guide the installation or repair process.
• Ensure Safety Compliance: Adhere to all safety codes and regulations, ensuring that electrical work complies with national and local electrical codes.
• Collaboration with Construction Teams: Work closely with other construction professionals, including architects, contractors, and project managers, to coordinate and support project timelines.
• Testing Electrical Systems: Perform tests on electrical systems to ensure they are functioning safely and effectively, including conducting insulation resistance and continuity tests.
• Troubleshoot Complex Systems: Identify and resolve issues in complex electrical systems, including transformers, generators, and control panels.
• Night Shift Work: Available for night shifts when required, ensuring continuity of work and addressing any electrical issues that may arise during non-daylight hours.
• Adherence to Project Deadlines: Work within the project timeline, ensuring that electrical installations are completed on schedule, particularly during night shifts or extended hours to meet deadlines.
• Documentation and Reporting: Maintain accurate records of electrical work performed, parts used, and time spent on tasks. Provide daily or weekly reports to supervisors or project managers on the progress.

We are seeking a highly skilled Electrical Supervisor with a proven track record in managing electrical installations, maintenance, and troubleshooting for Power Plant and Oil & Gas projects. The ideal candidate will be responsible for supervising electrical teams, ensuring compliance with safety regulations and project specifications, and delivering quality work within deadlines.

Key Responsibilities:

1. Supervision & Coordination:

- Plan, supervise, and coordinate electrical work activities on-site.

- Lead a team of electricians and technicians to complete installations, maintenance, and repairs.

2. Installation & Maintenance:

- Oversee the installation, testing, and commissioning of electrical systems, including transformers, switchgear, motors, and control panels.

- Conduct regular maintenance to ensure equipment reliability and efficiency.

3. Safety &Compliance:

- Ensure all electrical activities comply with Singapore MOM regulations and industry safety standards.

- Conduct risk assessments, safety briefings, and toolbox meetings for the electrical team.

4. Quality Assurance:

- Inspect and test completed electrical work to ensure compliance with project specifications and standards.

- Address and resolve any quality-related issues promptly.

5. Troubleshooting & Problem-Solving:

- Diagnose and resolve faults or issues in electrical systems and equipment efficiently.

- Collaborate with other supervisors or engineers to address interdisciplinary challenges.

6. Documentation & Reporting:

- Prepare and maintain accurate documentation of electrical work, including reports, progress updates, and inspection checklists.

- Provide feedback to project managers and clients on electrical progress and challenges.

Skills:

- Strong knowledge of electrical systems, equipment, and industry codes (e.g., IEC, NEC).

- Proficiency in reading and interpreting electrical schematics, blueprints, and technical manuals.

- Strong leadership and team management abilities.

- Excellent problem- solving and decision-making skills.

- Familiarity with energy management systems and electrical testing tools.

Experience:

- Minimum 5 years of experience in a supervisory role within Power Plant or Oil & Gas industries.

- Proven experience with electrical systems, including high-voltage installations and automation systems.

We are seeking skilled Mechanical Fitters to join our team in delivering high-quality services for Power Plant and Oil & Gas projects. The role involves the assembly, installation, maintenance, and repair of mechanical equipment, ensuring compliance with industry standards and Singapore MOM safety regulations. The ideal candidate will have technical expertise, attention to detail, and a strong commitment to safety and quality.

Key Responsibilities:

1. Installation & Assembly:

- Assemble, install, and align mechanical components such as pumps, turbines, heat exchangers, piping systems, and structural supports.

- Read and interpret blueprints, technical drawings, and manuals to ensure precise work execution.

2. Maintenance & Repairs:

- Conduct preventive and corrective maintenance on mechanical systems and equipment.

- Diagnose mechanical issues and carry out repairs, including replacing worn- out or damaged components.

3. Inspection & Testing:

- Perform equipment inspections to identify potential issues and ensure compliance with safety and performance standards.

- Conduct functional tests and pressure tests to validate equipment integrity.

4. Safety &Compliance:

- Adhere to workplace safety protocols and MOM regulations, including the proper use of PPE.

- Participate in toolbox meetings, hazard assessments, and emergency drills.

5. Documentation:

- Maintain accurate logs and reports of maintenance, repair activities, and inspection findings.

- Provide feedback on equipment performance to supervisors and technical teams

Responsibilities:

• Assists in planning, controlling and coordinating of mechanical and electrical works
• Checks discrepancies between project drawings and technical specification
• Liaises with site engineers to ensure a smoothly workflow
• Conducts M&E coordination meeting
• Schedules and monitor M&E work progress
• Monitor M&E works documents and shop drawings coordination
• Liaises with clients, consultants, subcontractors and suppliers
• Negotiate approval for M&E changes to the project

Job Requirements:

• Diploma / Degree in Engineer or equivalent
• Mechanical / Electrical Engineering or equivalent
• Familiar with construction site activities
• Co-ordinate, liaise & communicate with people of all levels
• Minimum 3 years relevant experience in building construction
• Able to work under tight schedules

Applicants are to email to [email protected]

Responsibilities

• Overall responsible for general office administration & purchasing
• Ensure office equipment maintenance and control
• Ensure the arrangement of facilities after award of project in preparation for project start up
• Purchasing processing, ensuring purchase is followed up
• Ensure the maintenance of Approved Subcontractor/Supplier List
• Participate in management review of system
• Initiate action to prevent non-conformance relating to internal process and systems
• Record maintenance
• Recommend improvement measures to the superior
• Assist the MR in internal and external communication

Requirements

• Minimum Diploma in Business Administration related qualifications.
• At least 5 years relevant working experience.
• Good communication skills
• An analytical mind with problem-solving skills
• Excellent organizational and multitasking abilities
• A team player with leadership skills
• Exceptional verbal and written communication skills.
• Ability to collect, track, and analyze large amounts of data.
• Understanding of consumer behaviors and industry trends.
• Extensive, accurate product knowledge.

Interested please email resume to [email protected]

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, we employ about 25,000 people across our network of subsidiaries and associated companies in Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. We rank among the largest companies listed on the Singapore Exchange and are a component stock of the FTSE Straits Times Index, Dow Jones Sustainability Asia Pacific Index, iEdge SG ESG Transparency Index and iEdge SG ESG Leaders Index.

Introduction to URS Business Area

We prepare cities for a smarter future, creating connected, resilient and sustainable cities. We have helped to make cities around the world a better place to live in, delivering urban efficiencies while keeping them safe and secure.

Our technologies address the connectivity, mobility, security, infrastructure and environmental needs of cities and provide IoT solutions for lighting, water and waste management.

Backed by a track record of 700 smart city projects in over 130 cities worldwide, we are well-equipped to help global cities address challenges from road congestion to physical and cybersecurity threats, as well as energy inefficiency and utility wastage.

Find out more: https://www.stengg.com/urban-solutions

Job Description Summary

• Gain a broad understanding of the Mobility Rail Line (MRL) business globally and in Singapore.
• Develop knowledge of the MPS AFC payment business and engage in selected tasks and opportunities.
• Build relationships with key leaders across MRD, MRL, and URS HQ.
• Attend selected MRL management meetings for insights into business operations.

Key Responsibilities:

• Support overseas pre-sales, business development, and tender submissions as part of the MPS team.
• Contribute to Singapore-based LTA projects and pre-sales activities.
• Assist Head MPS with business development efforts in Taiwan.
• Collaborate with the MPS project and solutions teams for Taiwan projects.
• Attend MRL management meetings for additional exposure and learning.

Key Accountabilities:

• Pre-Sales and Business Development: Participate in overseas pre-sales activities, business development, and tender submissions as a key member of the Mobility Payment Solutions (MPS) team.
• Project Participation: Actively contribute to the execution of Singapore-based LTA projects or pre-sales initiatives, ensuring alignment with project goals and timelines.
• Business Development for Taiwan: Assist Head MPS in driving business development efforts for Taiwan, including identifying opportunities and supporting strategic initiatives.
• Project Collaboration: Work closely with the MPS project and solutions teams to deliver successful outcomes for Taiwan projects, ensuring coordination and execution excellence.
• Management Exposure: Attend selected MRL management meetings to gain exposure to strategic decision-making processes and deepen your understanding of the Mobility Rail Line of Business.

Reporting Relationship

· The incumbent reports to Head MPS, Mobility Rail.

Work Location

ST Engineering Ang Mo Kio Electronics Hub