* Familiar with evaluation of quotation,preparation of quotation

* Responsible for taking off measurement from site & progress claim

* Carry out Quantity take-off for tendering of project

* Ability to source for supplies and sub-contractors for quotation for tendering

* Evaluation and certificate of sub-contractors' progress payments

* Project administration and documentation include preparation of interim

* Review and advise the Project team on the cost impact for variation of project specification

* Site co-ordination and drawing verification where needed

* Monitor projects through completion, providing correction, modification or assistance to other

* Perform other duties as assigned

*Coordinate ID works on site

*Assist the Project team in all aspect of project management such as project progress, monitoring, site supervision, checking of materials and workmanship, control of general workers

*Assist the Project team in all aspect of project management such as project progress, monitoring, site supervision, checking of materials and workmanship, control of general workers

*To carry out coordination and liaisons with all relevant parties

Support the Project manager to ensure projects are completed on time, within budget, meet *all safety standards and are of highest quality.

*Responsible for monitoring the daily process and progress at the project site

*Conduct project site inspection.

*Bilingual in English & Mandarin.

Requirements :

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Quantity Survey or equivalent.
• At least 3Year(s) of working experience in the related field is required for this position.

• Carry out repair, maintenance and troubleshooting of machinery onboard vessels in shipyard
• Liaise with Fleet Operations team on breakdown reports and vessel status
• Troubleshoot and carry out thorough rectification of deficiencies in machinery and control system
• Ability to perform wiring and termination of electrical cables
• Install electrical and electronic accessories and components
• Assisting Engineer any related job delegated

Job Descriptions:

Perform routine maintenance, repairs, and overhauls on diesel and gasoline engines used in construction and excavation machinery.

Diagnose and repair issues with construction machinery, including loaders, bulldozers, excavators, and cranes. Ensure that all equipment complies with safety standards.

Conduct thorough inspections of machinery to identify faults or potential issues. Use diagnostic tools and techniques to troubleshoot and resolve problems.

Implement and adhere to scheduled preventive maintenance programs to minimize downtime and extend the lifespan of equipment.

Adhere to all safety regulations and company policies while performing maintenance and repairs. Ensure that all equipment is operated and maintained safely and efficiently.

Requirements:

High school diploma or equivalent. Formal training or certification in mechanics, automotive technology, or a related field is preferred.

Minimum of 3 years of experience working as a mechanic, with hands-on experience in engine repair, cranes and excavator operation, and construction equipment maintenance.

Must be very familiar with XCMG machines.

Ability to work independently as well as part of a team.

Communicate effectively in both English and Mandarin to coordinate with team members and suppliers.

We regret to inform you that only shortlisted candidates would be notified.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Looking for candidates between 3-7 years experience.
• Perform activities such FAT/SAT and Installation verification for new equipment and modification of existing equipment.
• Review of Vendor Turnover Packages and Construction Trade Turnover Packages.
• Review Functional specifications
• Assist with execution of qualification protocols for IQ, OQ.
• Draft and execute commissioning protocols related to production equipment in upstream/downstream processes
• Support Change Control and deviation management processes
• Coordinates with other departments for efficient completion of projects.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Join Our Team as a Project Manager in ACMV!

Are you an experienced Project Manager with a strong background in the ACMV field? Whether you're looking for a career switch or a change of environment, we invite you to apply and be a part of our dynamic team. Send us your resume for further review.

Responsibilities:

• Oversee all aspects of the project including contractual, budget, resources, design, procurement, construction, quality, and safety.
• Lead the project team to ensure timely implementation and execution of works, driving project completion within the set timeline.
• Estimate costs, establish budgets, and conduct ongoing project cost monitoring to ensure financial efficiency.
• Maintain close communication with clients, architects, consultants, and subcontractors to ensure project alignment and success.
• Conduct regular site safety meetings and implement safe working conditions and environmental control measures.
• Review method statements, check for drawing discrepancies, and ensure adherence to project specifications and technical clarifications.
• Supervise and mentor project team members and subcontractors, fostering accountability and ensuring timely completion of assigned tasks.
• Train and guide Project Engineers, enhancing their skills and professional growth.
• Ensure all project deliverables meet required quality standards and specifications
• Efficiently allocate resources to meet project requirements.
• Manage and document changes to the project scope, ensuring all changes are communicated and approved.
• Maintain strong relationships with clients to ensure satisfaction and address concerns promptly.
• Ensure all project activities comply with relevant regulations.
• Perform any other tasks deemed necessary for project success.

Requirements:

• Diploma or Bachelor’s Degree in a relevant field.
• Minimum of 5 years of experience in project management, with a strong preference for candidates with ACMV experience.
• Demonstrated strong leadership abilities.
• Excellent communication skills and the ability to manage resources effectively.
• Specific experience in ACMV is highly advantageous.

Why Join Us?

• Opportunity to work on innovative projects that make a real impact
• Collaborative and supportive team environment with mentorship opportunities
• Continuous learning and professional development opportunities
• Competitive compensation and benefits package
• Exciting company culture with team outings, events, and more

Step Up Your Career as an ACMV Drafter with Us!

We are on the lookout for talented drafters to join our growing team. Specializing in M&E construction with a focus on ACMV systems, we offer opportunities for career growth and development. As we continue to evolve, this is your chance to sharpen your skills and move forward with us.

Responsibilities:

• Prepare detailed M&E shop drawings, section details, and as-built drawings, ensuring timely submissions for ACMV systems.
• Collaborate with project teams on coordination drawings and contribute to BIM development.
• Be actively involved in updating drawings and plans throughout the project lifecycle.
• Develop your skills by managing project models, including creating families, templates, annotations, and schedules.
• Participate in BIM Coordination Meetings, contributing insights that can shape project outcomes.
• Support project leaders with drawing amendments and ensure compliance with the latest standards.

Requirements:

• Min. NiTec/Diploma/Degree in Engineering (M&E preferred).
• Familiarity with ACMV system drawings is advantageous.
• Candidates with 2 years of AutoCAD experience, or 2 years in MEP modeling using Revit will be advantageous.
• Open to Junior or Senior drafters, with roles tailored to your experience and growth potential.

Working Experience And Skill Requirement IT Programmer

a. Must be able to speak and write English proficiently;

b. Have at least three (3) years' post graduate experience working with Personal computers or compatibles;

c. Have at least three (3) years' post graduate experience using MS OS such as Windows 7 or higher and Microsoft Outlook;

d. Able to conduct unit, module, functional and volume testing; to analyze test results and to take corrective action.

For Java Requirement

The Programmer shall be required to:

a. Have three (3) years’ experience, within the past four (4) year’s timeframe, in each of the programming skills: - JSP,

- Servlet,

- Java Bean,

- Java Script,

- Session management

- JDBC, SQL

b. Have two (2) years’ experience, within the past three (3) year’s timeframe, in coding programs using each of the skills:

- HTML 5

- XHTML

- AJAX

- Web Services (REST API)

- JSON

- Java Server Faces

- EJB (session, entity & message, Service Locator, Business Delegate, Data Transfer Object, Data Access Object),

c. Preferably have hands on experience on the following: - IBM RAD9.0 or above or Eclipse or equivalent

- Portal and Portlet development

- n-Tier Architecture

- Java Web Security/LDAP

- JEE Security

- JEE Transaction

- XML

- Web Services (SOAP)

- JNDI

- UML diagrams

- Secure coding to prevent application vulnerabilities (for eg. Cross-site scripting; Injection vulnerability flaws such as SQL injection, command injection; Race conditions; Improper error / exception handling, etc)

The Programmers shall be required to:

i. Code, modify, test, correct and document new and existing programs using assigned languages, tools and coding conventions;

ii. Prepare and document test data;

iii. Prepare and set up testing and production environment;

iv. Prepare and maintain program and system documentation;

v. Assist in establishing file structures and processing logic requirements;

vi. Produce deliverables according to group standards and procedures;

vii. Assist Project Leaders in the study and design of application systems and work coordination, project management and user training work;

viii. Troubleshooting and supporting end-users in the implementation and maintenance of application systems;

ix. Train other contract programmers in the relevant skills;

x. Participate in Disaster Recovery activities eg simulation exercise at Disaster Recovery sites;

xi. Learn / pick up new programming skills related to System Development and Maintenance as assigned by the supervisors;

xii. Any other tasks related to System Development and Maintenance as assigned by the supervisors.

Must be able to speak and write English proficiently;

a. Have at least three (1.5) years' post graduate experience working with Personal

computers or compatibles;

b. Have at least three (1.5) years' post graduate experience using MS OS such as

Windows 7 or higher and Microsoft Outlook;

c. Able to conduct unit, module, functional and volume testing; to analyze test results

and to take corrective action

d. Must have 1.5 years’ Microsoft SQL Server 2008 R2 (or higher version) programming experience

f) Must have 1.5 years’ Microsoft SQL Server Management Studio programming

experience (Database Engine; Analysis Services, SQL Server integration Services, Reporting Services)

g) Must have 1.5 years programming experience in ASP.Net

Job Description

• Preparing the list of works, materials, tools, machinery, and other things to be used.
• Conduct inspections before and after the work and plan the work for the given task.
• Communicate closely with supervisors by updating the works before, in progress, after, or after completion of on-site work.
• Preparing walls and other surfaces before painting outside/ Gondolas.
• Putty/Plaster to repair cracks.
• Hands-on support to building operations.
• Carry out preventive and corrective maintenance of the designated places.
• Documentation of scheduled routine findings and rectification.
• Attend to all work orders issued by the operations and management
• Knowledgeable in mixing and applying paint for painting.
• Able to protect furniture and fixtures before and during painting
• Daily routine inspection of building premises, safety measures, etc.
• To perform any ad hoc tasks as required
• Must attend early morning site meetings.
• Follows all required safety procedures.

Job Specifications

• Similar experiences will be advantages
• Able to commit to Overtime when required
• Able to calculate surface area and plan on the usage of paint
• Able to work at heights
• Able to work on weekends and public holidays should there be a requirement.
• Independent, resourceful, and able to work under pressure

Job Description:

· Overall responsible for the land surveying task.

· To perform leveling, traversing, setting-out point, survey data collecting, layout, map and field of topographic surveying, boundary surveys etc.

· Working closely with the engineering and construction team to meet the survey work required.

· Manage and plan the land surveying work schedule to ensure all drawings are accurately for survey work and approved by relevant teams.

· Ensure correctness of build-up according to construction plans and drawing. Verified accuracy of survey data, measurement and calculations.

· Carry out as-built surveys, and settlement monitoring for buildings

· Prepare and submit pre and post construction drawings.

· Star*net and Digital level software processing.

Requirement:

· Geo-Spatial Information and Technology, Diploma in land surveying, Geology/Geophysics or Civil Engineering preferred with relevant land surveying working experience.

· 5 years project surveying skills and 5 years working on site using surveying equipment.

· Experience in carry out project survey in commercial / residential / plant / civil work.

· Competency of using survey instrument and surveying software.

· Class 3 driving license.

1. Construction managers must prepare and follow project budgets, manage staff, coordinate with other workers and subcontractors, and be proactive in teamwork.

2. A construction manager's day typically starts early, often with a site visit. They gather with their team, including subordinates, subcontractors, and engineers, for morning briefings. These meetings set the tone for the day, discussing project progress, safety concerns, and work schedules

3. By effectively managing planning, design, cost, scheduling, contracts, quality, safety, communication, risk, and sustainability, construction managers help deliver projects on time, within budget, and to the required quality standards.

The Senior Quantity Surveyor is responsible for all cost and contractual issues on Main contract as well as Sub-contracts connected to the project.

A summary of the responsibilities for this position is, and not limited to, as follows:

• Preparation of Monthly Progress claims, variation orders and payments to subcontractors
• Involve in managing and reporting of project budget & cost control
• Responsible in Post-Contracts administration for both the Main Contract and Subcontracts.
• Monitor all financial aspects of the projects to ensure projects run according to budget
• Liaise and establish rapport with consultants, quantity surveyors, architects, developers and contractors on certification of claims for payment
• Be familiar with various stages of projects so as to source for the most viable yet reasonable priced materials.
• Able to share new perspectives on cost, orders and claims.
• With the understanding of the contractual legal rights, he/ she will be involved in advising the management on their position of the contract from the tender stage

Skills and Requirements

• Degree/Diploma in Quantity Surveying, Building or Civil Engineering
• Minimum 6 years working experience in tendering, estimating and measurement of quantities on buildings projects worth at least $100 million.
• Good analytical skills
• Candidates with knowledge in Singapore Institute of Architects (SIA) Conditions of Contract, REDAS, FIDIC, FIDIC Short Form of Contracts will be an added advantage.

We are a Main Contractor providing specialised services to a niche market. Due to expansion, we are looking for self motivated and qualified individual to join our Civil and Construction Department for the post of Site Supervisor.

Job Responsibilities:

- Oversee construction projects, monitor site progress and ensure on-time completion of the project

- Carry out works scheduling, material requisition, cost control, project supervision, and documentation

- Coordinating with sub-contractors on plan and control site works

- Managing safety procedures on construction sites to ensure worker

safety

- Perform any other duties as assigned by Project Manager / Superior

Requirements:

Candidate must possess at least a Diploma in Civil Engineering

Minimum 2 years of working experience in the Construction Industry

Strong communication and team working skills

Possess Class 3 driving license

• Supervise, organize and plan activities to ensure smooth fabrication and construction of structures within the stipulated schedule
• Prepare and plan project progress reports ahead of activities to be completed
• Redline markup drawings to be done progressively and update engineering
• Review technical drawings and advise engineering of any discrepancies before commencing any fabrication works
• Perform MTO and update progressively to ensure proper control of material procurement and usage
• Ensure that manpower is effectively deployed to deliver the products timely
• Follow up on all fabrication and installation job fit up, welding and inspection
• Understand and ensure compliance in project requirement and scope of work
• Manage and ensure subcontractor performance in line with provided schedule
• Resolve any technical problems or issues faced at the work site
• Attend the daily tool box meeting and convey instructions clearly

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 8 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

JOB DESCRIPTION

• Ensure compliance of operations with Workplace Safety and Health/Environmental Control regulations and statutory requirements
• Assist site management on safety and health related matters
• Follow up with the committee site walk inspection findings for WSH Officer to close up the report
• Assist in incident / workplace investigations and corrective action recommendations
• Responsible for daily checklists are properly documented
• Carry out daily toolbox meeting.
• Coordination with relevant site in-charge on improving the worksite safety and cleanliness.
• Ensure supervisors and workers are following safe work procedures compliance.
• Conduct site safety inspection to ensure compliance with Workplace Safety and health Act and regulations
• Assist to organize monthly Safety Committee meetings and put up safety reports, including safety issues
• Ensure that all safety and health documentations are maintained and readily available upon request
• Supervise all workers in providing safety measures and procedures in accordance with MOM Regulations
• Prepare, review and revise of method statement and risk assessment as and when required
• Any other ad-hoc duties assigned by superior from time to time
• Preferably with Semicon experience

Requirements

· WSQ: Advanced Certificate in WSH (Level B) or equivalent as required under

WSH regulations

· Managing Work-At-Height Course or equivalent (Work at Height for Assessor)

· Occupational First Aid

· BizSAFE Level 2: Risk Management

· Processes other safety certificates is an additional advantage

· Possess technical and excellent problem-solving and interpersonal skills to coordinate between the various disciplines and construction teams

· Manages all aspects of the construction site, from site preparations to build out

· Liaise and work closely with various project stakeholders – client, consultants, RTO, sub-contractors, suppliers, authorities, etc

· To assist quantity take-off for material order, such as rebar, steel members, concrete, tiles, furniture, etc

· Conduct regular inspections and ensures that the constructed work is aligned with the approved plans and drawing

· Assist in shop drawings and as-built drawing preparation for submission and consultant’s approval

· Prepare and submit RFI/ RFA

· Document action items and follow-up from project meetings

· Prepare project progress claims and progress photos

· Review subcon progress claims and prepare payment recommendation

· Prepare VO submission to project QS/client

· Assist to prepare construction schedule

· Adheres to time, cost and quality specifications while complying with relevant regulatory and legislative requirements

· Able to work remotely at site-office

• Oversee and keep track of project progress and identify possible delay events with mitigations solution such as re-sequencing of work etc
• Lead the construction team for all site activities
• Plan ahead and lead /coordinate all subcontractors
• Coordinate with Site Safety Team to ensure compliance with workplace safety regulations
• Review and comment subcontractor’s construction plans and programs
• Present to Client and Consultants for weekly report, site progress and planning
• Liaise with Clients, Consultants to resolve site issues

Job Requirements:

• Degree in Architecture/ Civil/ Structural Engineering or equivalent
• At least 15 years of relevant site experience for building projects with structural steel and precast, inclusive of projects with similar scale & complexity
• Familiar with Singapore Codes and Practices
• Candidate who experience in the construction/management of the following is preferred
• 50m lap pool of more than 1.2m depth
• local experience with deep excavation (6m or more)
• long span structural steel (30m or more)
• pedestrian Overhead Bridge
• projects along water courses, including waterways or water bodies
• sport and recreation facilities and/or institution projects
• Location : Punggol (Near MRT)
• Project : Sports Centre

The proposed personnel shall have minimum two (2) years of experience in the supervision of works similar in nature to the Works in the Civil Contract.

He/she shall have experience in supervising installation and monitoring of geotechnical instrumentation.

The proposed personnel shall have a diploma in the civil/structural discipline or National Certificate in Construction Supervision (NCCS) or equivalent and shall be accredited by JAC of IES/ACES as QSS.

The QSS shall meet the required minimum hours of work per month (Base Monthly Work Hours) which shall be computed based on the normal working hours for the week (forty-four (44) hours a week).

Work area -West side

We are seeking a skilled and detail-oriented BIM Coordinator specializing in ACMV systems to join our team. The ideal candidate will be responsible for managing and coordinating Building Information Modeling (BIM) processes for ACMV projects, ensuring that all designs are accurate, efficient, and aligned with project requirements. The BIM Coordinator will work closely with project managers, engineers, and other stakeholders to optimize workflows and ensure successful project execution.

BIM Management and Coordination:

• Develop, manage, and maintain BIM models for ACMV systems throughout the project lifecycle.
• Coordinate with multidisciplinary teams, including MEP engineers, architects, and contractors, to ensure seamless integration of ACMV systems within the overall design.
• Review, verify, and ensure compliance with project BIM execution plans and standards.

Model Creation and Detailing:

• Generate detailed 3D models for ACMV systems, including ductwork, piping, and ventilation components, using software like Revit, AutoCAD, and Navisworks.
• Create accurate shop drawings, schematics, and installation layouts based on the BIM models.

Clash Detection and Resolution:

• Conduct clash detection and resolve conflicts between ACMV systems and other building systems using tools like Navisworks or BIM 360.
• Provide solutions to design issues, ensuring efficient coordination and conflict-free models.

Project Documentation and Standards:

• Ensure all BIM models comply with industry and company standards, as well as project-specific requirements.
• Maintain up-to-date project documentation, including revision tracking and as-built models.

Collaboration and Communication:

• Act as the primary point of contact for ACMV-related BIM coordination.
• Facilitate regular BIM coordination meetings to address issues, update stakeholders, and ensure project milestones are met.
• Provide technical support and guidance to team members on BIM-related processes and software.

Training and Development:

• Train and mentor junior team members in BIM processes and best practices.
• Stay updated on the latest BIM technologies, tools, and trends to continually improve workflows.

Requirements

• Diploma or degree in Mechanical Engineering, Building Services, or a related field.
• BIM certification (e.g., Autodesk Certified Professional or equivalent).
• Familiarity with green building standards and sustainability practices.
• Proficiency in BIM software, including Revit, AutoCAD MEP, Navisworks, and BIM 360.
• Strong knowledge of ACMV systems, including ductwork, piping, and ventilation design principles.
• Minimum 3-5 years of experience in BIM coordination, preferably in ACMV or MEP fields.
• Experience in clash detection, model coordination, and project documentation.
• Excellent communication and interpersonal skills for effective collaboration with various stakeholders.
• Strong analytical and problem-solving abilities.

• Carry out repair, maintenance and troubleshooting of machinery onboard vessels in shipyard
• Liaise with Fleet Operations team on breakdown reports and vessel status
• Troubleshoot and carry out thorough rectification of deficiencies in machinery and control system
• Ability to perform wiring and termination of electrical cables
• Install electrical and electronic accessories and components
• Assisting Engineer any related job delegated

Roles and Responsibilities:

• Perform daily operational activities which includes attending to customers' enquiries, needs and complaints
• Perform preventive and breakdown technical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers, and electrical control
• Handling works at Grade A Commercial Buildings

Requirements

• Nitec in Mechanical / Electrical or related field
• Candidates with 2 years or more related experience in Facilities Management will be an added advantage
• No experience is welcome to apply (on Job Training)
• Positive attitude, good interpersonal and customer-centric skills
• Shift Work required (3 shifts: Morning, Afternoon and Night)
• Night shift allowance provided
• Work Location: CBD
• Only Singaporeans may apply

Working location: Jurong Island

Job Description:

• Oversee entire construction projects and execute on time delivery within budget
• Manage contractors and construction materials
• Schedule and estimate project completion time to ensure that projects are completed within specified time
• Manage works with Safety and Quality on top priority and ensure that all safety precautions are adhered to by the construction team
• Overview on Compliance and Local Regulations
• Obtain and ensure the necessary licenses or permits for each construction stages
• Other ad-hoc duties when assigned.

Desired Skills and Experience:

• Degree in Civil Engineering or equivalent.
• Minimum 3 years of experience in civil/construction projects
• Meticulous with leadership/problem-solving skills/qualities
• Good communication and interpersonal skills

Requirements

• Excellent experience in managing of Construction projects in Oil & Gas industry (especially in Jurong Island) is strongly required.
• Proficiency with project management software and tools (i.e. Primavera, MS Project, Autocad, etc).
• Understand the Drawings and able to take-off quantities and create the budget and monitor the cost throughout the project.
• Able to work for Extended hours.
• Perform to work on Weekends and Public Holidays.

Duties and Responsibilities:

• Diagnose technical issues reported by customers through phone, email, or ticketing systems, providing remote troubleshooting and guidance.
• Schedule and coordinate service visits and appointments with customers, ensuring efficient use of time and resources.
• Perform equipment installations, upgrades and preventive maintenance activities according to manufacturer specifications and service agreements.
• Test equipment functionality and performance after repairs or installations, ensuring compliance with quality standards and safety regulations.
• Provide training and technical assistance to customers and end users on equipment operation, maintenance procedures and troubleshooting techniques.
• Communicate effectively with customers, explaining technical concepts and solutions clearly and concisely.
• Escalate complex or unresolved issues to senior engineers or management for further investigation and resolution.
• Stay updated on product developments, technical advancements and industry trends to maintain expertise and provide proactive support.
• Responding to customer service requests, diagnosing equipment problems and providing timely and effective solutions.
• Performing on-site repairs, maintenance and installations of equipment and machinery.
• Conducting preventive maintenance checks and routine inspections to identify potential issues and ensure equipment reliability.
• Collaborating with internal teams, including sales, engineering and product development, to address customer needs and provide technical assistance.
• Documenting service activities, including service reports, repair logs and customer communication, to maintain accurate records and ensure traceability.