Network Maintenance and Support: Perform routine maintenance tasks on network devices, including firmware updates, patches, and configurations. Troubleshoot and resolve network issues, ensuring minimal downtime. Monitor network performance and proactively address bottlenecks or anomalies.

Firewall Management: Configure, manage, and maintain Palo Alto and Check Point firewalls to ensure network security.
Implement and maintain firewall policies to control traffic and protect against threats.

Switch Management: Configure and manage Cisco switches, ensuring optimal performance and network segmentation.
Troubleshoot and resolve LAN/WAN connectivity issues.

Access Control and Authentication: Administer Aruba ClearPass Policy Manager (CPPM) for user authentication and access control.
Ensure compliance with security policies and standards.

Documentation: Maintain accurate and up-to-date network documentation, including diagrams, configurations, and asset inventory.

Collaboration: Collaborate with other teams, including system administrators and security experts, to achieve common network goals.

Security Compliance: Ensure that network configurations and policies comply with industry best practices and security standards.

*Needs to be on standby on Saturdays, Sundays, and public holidays to ensure a seamless network infrastructure.

* Successful candidates must be willing to work night shifts if required.

We are looking for skilled Electricians to perform electrical installations, maintenance, troubleshooting, and repairs for Power Plant and Oil & Gas projects. The ideal candidate will have strong technical knowledge, attention to detail, and a commitment to safety and compliance with Singapore MOM regulations.

Key Responsibilities:

1.Installation & Maintenance:

- Install, repair, and maintain electrical systems, including wiring, lighting, motors, transformers, and switchgear.

- Ensure proper grounding, earthing, and connection of all electrical components.

2.Troubleshooting & Repair:

- Diagnose and repair electrical faults in systems and equipment.

- Replace defective or worn-out parts, such as circuit breakers, fuses, and cables.

3.Testing & Inspection:

- Perform electrical testing, including insulation resistance and continuity tests, to ensure safe and efficient operation.

- Inspect electrical systems to identify hazards or areas needing improvement.

4.Safety & Compliance:

- Follow all safety guidelines, including proper use of personal protective equipment (PPE).

- Adhere to Singapore MOM regulations and workplace safety standards.

5.Documentation:

- Maintain accurate records of electrical work, including inspections, repairs, and test results.

Report to supervisors on project progress and any challenges encountered

Skills:

· Strong knowledge of electrical systems, equipment, and safety standards.

· Ability to read and interpret electrical schematics, blueprints, and manuals.

· Proficiency in using electrical testing tools like multimeters and insulation testers.

· Strong problem-solving and troubleshooting skills.

· Physical fitness and the ability to work in confined spaces and at heights

We are seeking a highly skilled 6G TIG & MIG Welder to perform high-quality welding work for Power Plant and Oil & Gas projects. The ideal candidate will have expertise in TIG (Tungsten Inert Gas) and MIG (Metal Inert Gas) welding processes, with the ability to weld in all positions, including the challenging 6G position. This role demands precision, attention to detail, and strict adherence to safety and quality standards.

Key Responsibilities:

1. Welding Operations:

- Perform TIG and MIG welding on various metals, including carbon steel, stainless steel, and alloys, in the 6G position.

- Prepare materials by cleaning, cutting, and shaping metal components before welding.

- Ensure proper alignment and fit-up of components for welding operations.

2. Inspection & Quality Control:

- Inspect welds to ensure they meet industry standards, project specifications, and client requirements.

- Perform visual inspections and assist in non-destructive testing (NDT) as required.

3. Blueprint Interpretation:

- Read and interpret blueprints, technical drawings, and welding symbols to determine welding requirements.

4. Safety & Compliance:

- Adhere to all safety protocols, including the proper use of personal protective equipment (PPE).

- Comply with Singapore MOM regulations, project safety requirements, and industry standards.

5. Equipment Maintenance:

- Operate and maintain welding equipment and tools in good working condition.

- Troubleshoot welding equipment issues and report malfunctions to the supervisor.

Requirements:

- Welding Certification (mandatory): Certification in Welding Technology or an equivalent welding certification that is recognized by industry standards, such as AWS, ASME, or ISO.

Experience:

· Minimum 5 years of experience as a TIG & MIG welder, with expertise in 6G position welding.

Prior experience in Power Plant or Oil & Gas projects is highly desirable

We are looking for a highly skilled Mechanical Supervisorwith a minimum of 5 years of experience in overseeing mechanical projects in Power Plant and Oil & Gas industries. The ideal candidate will be responsible for supervising the installation, maintenance, and repair of mechanical systems and equipment while ensuring compliance with safety regulations, quality standards, and project timelines.

Key Responsibilities:

1. Project Supervision:

- Plan, supervise, and coordinate mechanical work activities to ensure smooth execution.

- Manage and lead a team of mechanical fitters, technicians, and subcontractors to meet project objectives.

2. Installation & Maintenance:

- Oversee the installation, alignment, and maintenance of mechanical equipment, including pumps, valves, compressors, and piping systems.

- Review and verify technical drawings, specifications, and blueprints to ensure accuracy during execution.

3. Safety & Compliance:

- Ensure adherence to all safety protocols and MOM regulations on-site.

- Conduct safety briefings, toolbox meetings, and risk assessments for all team members.

4. Quality Assurance:

- Inspect completed work to ensure compliance with industry standards, project specifications, and client requirements.

- Address and resolve any quality-related issues promptly.

5. Team Management:

- Provide technical guidance, training, and mentorship to team members.

- Evaluate team performance and recommend improvements or additional training as needed.

6. Reporting & Documentation:

- Prepare and submit daily progress reports, manpower records, and inspection checklists.

- Communicate effectively with project managers, clients, and stakeholders to provide updates and resolve concerns.

Skills:

· Strong knowledge of mechanical systems, equipment, and tools.

· Proficiency in interpreting technical drawings, schematics, and manuals.

· Excellent leadership, communication, and organizational skills.

· Ability to troubleshoot and resolve complex mechanical issues efficiently.

·Familiarity with industry codes and standards, such as ASME, API, and ISO.

• Installation and Maintenance of Electrical and Mechanical Systems: Install, maintain, and repair electrical and mechanical systems, including motors, generators, HVAC systems, and other complex equipment across construction projects.
• System Integration: Collaborate with engineers and other technicians to integrate electrical and mechanical systems, ensuring compatibility and proper functioning across all areas of the project.
• Troubleshooting and Fault Diagnosis: Identify and troubleshoot issues in both electrical and mechanical systems, using specialized tools to analyze and repair problems related to wiring, circuit boards, and mechanical components.
• Blueprint and Technical Drawing Interpretation: Read and interpret electrical and mechanical blueprints, technical drawings, and schematics to ensure proper system installation and repairs.
• Safety Standards Compliance: Ensure all work is performed in compliance with safety regulations, electrical codes, and mechanical standards to prevent accidents and ensure a safe working environment.
• Performance Testing and Calibration: Conduct performance testing and calibration of electrical and mechanical systems to ensure they meet the required specifications and function efficiently.
• Collaboration with Project Teams: Work closely with engineers, architects, and other construction teams to ensure the proper design, installation, and integration of electrical and mechanical systems.
• Night Shift and After-Hours Support: Be available for night shifts or after-hours work to perform emergency repairs, conduct routine system checks, or ensure that critical systems are operational when needed.
• Preventative Maintenance: Perform regular maintenance on mechanical and electrical systems to prevent breakdowns and extend the life of equipment, following scheduled maintenance programs.
• Documentation and Reporting: Maintain detailed records of all maintenance, repairs, and installations carried out. Report any issues or progress to the management team, ensuring accurate documentation for future reference.

Responsibility:

• Assist architectural work for the project
• Assist to liaise with sub-contractors / suppliers and the consultants
• Assist to review shop drawings submitted by sub-contractors / suppliers prior to submission
• Co-ordinating sample submission, approval, schedule for delivery and installation of the architectural items
• Assist in mock-up for architectural trade, obtaining approval, implementation and installation
• Assist to ensure architectural works are done in accordance to the stipulated procedure, schedule and quality
• Assist the architectural team towards achieving the CONQUAS target score as set down by the Project Manager.

Requirement:

• Degree in Architectural Engineering
• Minimum 3 years related construction experience

Our client is a well-established MNC, market leader in the Engineering industry. They are looking for a Senior HR Executive to assist their team for the next phase of their business. They are located in the West area – easily accessible.

Responsibilities:

• HR functions and general admin support
• Process monthly payroll
• Recruitment and Selection
• Follow strict compliance with data protection regulations.
• Adhere to all Personal Data Protection Act (PDPA) guidelines, ensuring compliance company requirements.
• Manage employment benefits in a sustainable manner by utilizing government support programs where appropriate, balancing employee expectations with organizational needs.
• Collaboration with Managers address manpower requirements
• Support HR policies and provide training initiatives to enhance skills and workforce development.
• Promote a culture of continuous improvement by sustaining the 5S methodology in daily operations.
• All other ad hoc duties as assigned

Requirements:

• Minimum Diploma in HR or other relevant field of studies
• Minimum 2 years of relevant experiences

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R23115674 (Chong Jia Jia)

Our client is from Construction Industry. They are looking for a WSH Officer to assist their Engineer team for the next phrase of their business. They are located Islandwide of Singapore– easily accessible. The WSH Officer is responsible for:

Duties

• Effectively lead the safety team and ensure the implementation of Workplace Safety & Health (WSH) Management Systems to minimize risks and accidents.
• Review and update all risk assessments to maintain compliance with WSH regulations and legal standards.
• Investigate on-site incidents and implement corrective measures to prevent recurrence.
• Ensure adherence to WSH Act provisions, enforce safety measures, and conduct regular inspections to ensure compliance among staff and subcontractors.
• Ensure the effectiveness of fire protection systems and emergency response management for the office and factory.
• Promote a strong safety culture through training, awareness campaigns, and employee engagement activities like drills and competitions.
• Liaise with statutory bodies, keep up to date on WSH regulations, and ensure compliance with waste management and licensing requirements.

Requirements

• Registered as WSHO with MOM
• Min 3 years of experience performing as a WSHO
• Relevant Qualification in Workplace, Safety and Health / Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Qualifications and Requirements :

Mandatory:

• At least a Bachelor’s degree in any of these faculties: Computer Science, Information Technology, Programming & Systems Analysis ,Science (Computer Studies)
• At least 12+ years of experience in Information Technology arena with demonstrated experience around strategic planning, enterprise architecture preferably in banking & financial services, risk management and software engineering.
• Experienced in leading technical design from inception to proof of concept
• Good knowledge of strategic IT solutions and hands-on experience in software development.
• A strong understanding of latest programming languages including Python, Java, Rust and Go
• Good knowledge of algorithms and data structures, with strong fundamentals in complexity analysis
• Experience in platform and/or product definition, operating model and change management
• Strong ability to analyze code – understand execution flow & debug even
• Understanding of CI/CD pipelines, MLOps and tooling

Good to Have

• Understanding of trade life cycle, financial products (Treasury, FX, Bonds, Credit, IRD…)
• Exposure to Capital Market FO/BO system
• Understanding the complexity of internal relationships within a large corporate, you are comfortable at proactively engaging key stakeholders, managing individual concerns in order to propose achievable and comprehensive “high level plans”.

Job Description:

- Set-up and operate automated assembly machines

- Perform powder Pressing role

- Assembled of Components and Product, Perform Linking & Packing

- Carry out work in accordance to Process sheet and Operating Work Instruction

- Label, Pack & Palletize of Parts, Boxes, Pallet, etc.

- Handle/ Shift of Parts/ Equipment involving the use of lifting equipment (Lifting Tables, Pallet Jacks, Trolley, etc.)

- Meet daily production output

- Perform in-process inspection

- Assist in maintenance of the machines

- Perform daily housekeeping

- General Ad-Hoc task assigned by the supervisor

Job Requirements:

- Nitec or Higher Nitec in Mechanical, Mechatronics or Electrical Engineering)

- Able to pick up fast, complete task assigned with minimum supervisor, able to handle stress and willingly to work overtime as and when require

- Good working attitude

- Must comply with Company Policies, Security Regulation and EHS Regulations

Job Description:

• Assist Project Manager on Administrative Duties related to General Office Administration at Site Office (Recording, updating files, Documentations and photocopying)
• Liaise with the Head Office on office administration matters.
• Handle receipt of incoming mail including drawings and direct them to the relevant staff for subsequent circulation and follow-up action.
• Handling incoming telephone calls and assist in attending to complaints and feedbacks over the telephones.
• Handling all necessary data tabulation, compilation and assist in simple data submission as project needs.

Job Requirement:

• 1 Year related working experience
• Station at Project Site Office

Job Description:

• Assist in purchasing of all project work materials identified in the tender
• Assist in evaluating and selecting competent suppliers and sub-contractors for the construction works.
• Measure and determine the amounts of work done at any stage of the construction so as to prepare periodic progress payment requests for submission to client.
• Check and evaluate the progress claims submitted by the sub-contractors in liaison with Project Manager / designated staff on the work done in terms of quantities and quality.
• Carry out contract administration duties.
• Assist in the settlement of final accounts with client, suppliers and subcontractors.

Job Requirements:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil), Engineering (Others) or equivalent.
• At least 5 Year(s) of working experience in Construction field is required for this position.

Job Responsibilities:

• Assist the M&E Manager to review the M&E project in-depth and ensure to schedule deliverables
• Assist the M&E Manager to oversee all onsite and offsite M&E constructions to monitor compliance with building and safety regulations
• Coordinate and direct M&E construction workers and subcontractors
• To assist the M&E Manager to review the M&E work progress on daily basis
• To assist the M&E Manager to plan ahead to prevent problems and resolve any emerging ones
• Ensure quality M&E construction standards, monitor materials submission and approval status

Job Requirements:

• Relevant Tertiary Education
• Min 7 years related working experience

We are seeking a qualified and experienced Lifting Supervisor to oversee and manage lifting operations for Power Plant and Oil & Gas projects. The ideal candidate will ensure all lifting activities are carried out safely, in compliance with regulatory requirements and project specifications. This role requires strong technical expertise, attention to detail, and excellent communication skills.

Key Responsibilities:

1. Planning & Coordination:

- Plan and coordinate lifting operations, including selecting appropriate lifting equipment and techniques.

- Assess the load, rigging methods, and environmental conditions to ensure safe lifting procedures.

2. Safety Management:

- Supervise all lifting activities, ensuring strict adherence to safety protocols and MOM regulations.

- Conduct pre-lift safety checks, toolbox talks, and risk assessments before commencing operations.

3. Operational Supervision:

- Guide and oversee riggers, signalmen, and equipment operators during lifting operations.

- Ensure proper rigging, sling configurations, and load securing for all lifts.

4. Compliance & Documentation:

- Verify and ensure compliance with Singapore’s Workplace Safety and Health (WSH) guidelines.

- Maintain accurate records of lifting plans, permits, and inspection reports.

5. Incident Management:

- Address and resolve any safety concerns or operational issues on-site.

- Report and document any incidents, near-misses, or equipment malfunctions promptly.

Skills:

· Strong knowledge of lifting equipment, rigging techniques, and safety standards.

· Ability to interpret load charts, lifting plans, and risk assessments.

· Excellent leadership and team coordination skills.

· Good problem-solving skills to handle unforeseen challenges during lifting operations.

· Physical fitness and the ability to work in challenging environments.

We are looking for an experienced E&I Technician to support the installation, maintenance, troubleshooting, and repair of electrical and instrumentation systems for Power Plant and Oil & Gas projects. The ideal candidate will have a strong background in both electrical and instrumentation systems, a solid understanding of industry standards, and the ability to work safely in complex environments.

Key Responsibilities:

Electrical Systems:

1. Installation & Maintenance:

- Install, maintain, and repair electrical systems, including power distribution, lighting, motors, and electrical panels.

- Inspect and test electrical systems to ensure compliance with safety and operational standards.

2. Troubleshooting & Repair:

- Diagnose and repair faults in electrical systems, including switches, circuit breakers, and wiring.

- Conduct preventive maintenance on electrical components to avoid downtime.

3. Wiring & Connection:

- Ensure correct wiring and connections for electrical circuits, following blueprints and schematics.

- Assist in the installation and commissioning of new electrical systems and equipment.

Instrumentation Systems:

1. Installation & Calibration:

- Install and calibrate instrumentation equipment, including flow meters, pressure sensors, temperature transmitters, and level sensors.

- Set up and configure control systems, including PLCs (Programmable Logic Controllers) and DCS (Distributed Control Systems).

2. Troubleshooting & Testing:

- Troubleshoot and repair instrumentation equipment to ensure accurate readings and safe operation.

- Perform calibration and adjustment of instruments to meet system specifications.

3. System Integration:

- Ensure proper integration of electrical and instrumentation systems within the control room or automation network.

- Assist in the configuration and maintenance of control panels and process control systems.

Job Description:

• Manage the project site by overseeing the day-to-day running of all matters related to the construction of the project as designated by the Project Manager.
• Plan, implement and monitor the work schedules according to the master and detailed work programmes.
• Assist in the planning and sequencing of the construction operations according to the Project Quality Plan.
• Liaise with client's representatives on site and with all subcontractors.
• Conduct inspections and checks on work performed by all subcontractors.
• Assist in the evaluation and resolution of any discrepancies and problems arising during construction and which has an effect on quality of the works.
• Ensure that updated drawings including shop drawings are used by for all construction.
• Co-ordinate the handing over of completed works to the client and completion of the necessary rectification works.
• Prepare project-related reports as required by the Project Manager or Construction Manager.

Job Requirement:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• PE Board Recognised Degree
• At least 5 Year(s) of working experience in the related field is required for this position.

Job requirement and responsibilities:

1. Ensure all workplace policies & procedures are adhere

2. Construction Site working environment, station in container office on site

3. Oversee and coordinate all on-site activities

4. Coordination with the other internal departments like Design, Production & Procurement

5. Prepare work report submission to customer

6. Issue work order to factory and material request to procurement

7. Understand and fulfill customer requirements

Minimum requirement:

1. Tertiary degree in Engineering or equivalent

2. Min 3 years of working experience

3. Ability to read & interpret specification

4. Proficient in Microsoft Office

5. Dynamic and keen to learn

6. Able to work within a team

7. Good Communication & interpersonal skills

Roles and Responsibilities

• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• Monitor compliance to applicable codes, practices, quality assurance (QA)/quality control (QC) policies, performance standards and specifications.
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status.
• Assign responsibilities and mentor project team.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Review engineering deliverables and initiate appropriate corrective actions.
• Attend meeting with client, when necessary.

Qualification Requirements

• Diploma/Degree in Engineering or relevant field.

Preferred Skills

• Proficient in AutoCAD and Microsoft Project.
• Proven working experience as a Project Engineer.
• Familiar with rules, regulations, best practices, and performance standards.
• Ability to work with multiple discipline projects.
• Project management and supervision skills.
• Decision making ability and leadership skill.
• Time management and organization skills.

We are seeking experienced Valve/Pump Fitters to join our team, specializing in the installation, maintenance, and repair of industrial valves and pumps for Power Plant and Oil & Gas projects. The ideal candidate will demonstrate strong technical expertise, a commitment to safety, and a proactive approach to maintaining equipment reliability in compliance with Singapore's Ministry of Manpower (MOM) safety standards.

Key Responsibilities:

1. Installation & Maintenance:

- Install, fit, and align industrial valves and pumps as per technical drawings and specifications.

- Conduct routine maintenance and servicing to ensure optimal performance of valves and pumps.

2. Repair & Overhauling:

- Diagnose faults and perform repairs on malfunctioning valves and pumps, including replacing parts such as seals, gaskets, and bearings.

- Overhaul and refurbish pumps and valves as part of scheduled maintenance.

3. Testing & Inspection:

- Perform pressure testing and flow testing to verify valve and pump integrity and functionality.

- Inspect equipment for wear, corrosion, or other issues that may impact performance.

4. Safety & Compliance:

- Adhere to all safety protocols, including proper use of PPE, and ensure compliance with MOM regulations.

- Identify potential hazards during operations and implement corrective measures.

5. Documentation:

- Maintain accurate records of installations, maintenance, and repairs.

- Provide detailed reports to supervisors and project teams.

Skills:

· Proficiency in reading and interpreting technical drawings and piping schematics.

· Strong troubleshooting and problem-solving abilities.

· Familiarity with precision tools such as micrometers and dial gauges.

· Excellent teamwork and communication skills.

· Physical fitness and the ability to work in challenging environments

We are seeking an experienced Millwright Fitter to join our team in supporting the installation, maintenance, and repair of mechanical equipment and machinery in Power Plant and Oil & Gas projects. The ideal candidate will have a solid understanding of mechanical systems, including alignment, fitting, and assembly, as well as a strong commitment to safety and quality standards.

Key Responsibilities:

1. Installation & Assembly:

- Install, align, and assemble mechanical systems, machines, pumps, compressors, turbines, conveyors, and other rotating equipment.

- Read and interpret blueprints, schematics, and technical drawings to ensure accurate assembly and installation.

- Use precision measuring instruments such as calipers, micrometers, and alignment tools for accurate fitting.

2. Maintenance & Repair:

- Perform preventive and corrective maintenance on mechanical equipment, machinery, and systems.

- Diagnose and troubleshoot faults in mechanical systems and equipment.

- Replace worn-out or defective parts, such as bearings, seals, and gaskets, to restore equipment functionality.

3. Fitting & Alignment:

- Fit and align components using hand tools, power tools, and measuring instruments.

- Ensure the proper alignment of shafts, couplings, and other rotating components to minimize wear and ensure efficient operation.

- Work with bearing, gear, and coupling assemblies to ensure proper operation.

4. Machining & Fabrication:

- Use lathes, milling machines, and grinders to modify parts, produce new components, or repair worn parts.

- Fabricate and weld components as required to complete repairs or modifications to machinery.

5. Safety & Compliance:

- Adhere to all safety protocols and procedures, including the proper use of personal protective equipment (PPE).

- Comply with project safety regulations and local industry standards (e.g., ISO, ASME, and other relevant codes).

- Ensure that work is completed in compliance with the project timeline and meets quality standards.

Skills:

- Proficiency in mechanical fitting, alignment, and installation of mechanical systems.

- Strong knowledge of mechanical equipment and machinery used in Power Plants and Oil & Gas sectors.

- Ability to interpret technical drawings, blueprints, and schematics.

- Familiarity with machine shop equipment (e.g., lathes, milling machines, grinders) and tools.

- Strong problem-solving skills and the ability to troubleshoot mechanical issues efficiently.

Job Responsibilities:

• Assist the M&E Manager to review the M&E project in-depth and ensure to schedule deliverables

• Assist the M&E Manager to oversee all onsite and offsite M&E constructions to monitor compliance with building and safety regulations

• Coordinate and direct M&E construction workers and subcontractors

• To assist the M&E Manager to review the M&E work progress on daily basis

• To assist the M&E Manager to plan ahead to prevent problems and resolve any emerging ones

• Ensure quality M&E construction standards, monitor materials submission and approval status

Job Requirements:

• Min 5 years M&E Local Construction Working Experience.

• Approved qualification by Professional Engineers Board.

Description:

• You will be responsible for providing sterile and serviceable surgical instruments and equipment.
• You will be involved in the decontamination, inspection, preparation, packaging, sterilization, storage and distribution of the sterile devices to operating theatres and procedural rooms.
• You will also be involved in projects involving work-process improvements as you gain experience in the department.

Requirements:

• Min Diploma Mechanical Engineering
• Able to commit to rotating day & night shift work
• No exp needed, training provided

Location: Outram

Working hours: 3 rotating shifts (8am to 4.35pm; 1pm to 9.35pm; 9pm to 7.30am)

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• Installation of Electrical Systems: Install electrical wiring, outlets, switches, circuit breakers, and other components as per the construction drawings and specifications.
• Troubleshooting and Maintenance: Diagnose electrical issues, repair or replace faulty wiring, circuit breakers, and electrical equipment to ensure proper functioning.
• Reading Blueprints and Schematics: Interpret electrical blueprints, schematics, and technical diagrams to guide the installation or repair process.
• Ensure Safety Compliance: Adhere to all safety codes and regulations, ensuring that electrical work complies with national and local electrical codes.
• Collaboration with Construction Teams: Work closely with other construction professionals, including architects, contractors, and project managers, to coordinate and support project timelines.
• Testing Electrical Systems: Perform tests on electrical systems to ensure they are functioning safely and effectively, including conducting insulation resistance and continuity tests.
• Troubleshoot Complex Systems: Identify and resolve issues in complex electrical systems, including transformers, generators, and control panels.
• Night Shift Work: Available for night shifts when required, ensuring continuity of work and addressing any electrical issues that may arise during non-daylight hours.
• Adherence to Project Deadlines: Work within the project timeline, ensuring that electrical installations are completed on schedule, particularly during night shifts or extended hours to meet deadlines.
• Documentation and Reporting: Maintain accurate records of electrical work performed, parts used, and time spent on tasks. Provide daily or weekly reports to supervisors or project managers on the progress.

We are seeking a highly skilled Electrical Supervisor with a proven track record in managing electrical installations, maintenance, and troubleshooting for Power Plant and Oil & Gas projects. The ideal candidate will be responsible for supervising electrical teams, ensuring compliance with safety regulations and project specifications, and delivering quality work within deadlines.

Key Responsibilities:

1. Supervision & Coordination:

- Plan, supervise, and coordinate electrical work activities on-site.

- Lead a team of electricians and technicians to complete installations, maintenance, and repairs.

2. Installation & Maintenance:

- Oversee the installation, testing, and commissioning of electrical systems, including transformers, switchgear, motors, and control panels.

- Conduct regular maintenance to ensure equipment reliability and efficiency.

3. Safety &Compliance:

- Ensure all electrical activities comply with Singapore MOM regulations and industry safety standards.

- Conduct risk assessments, safety briefings, and toolbox meetings for the electrical team.

4. Quality Assurance:

- Inspect and test completed electrical work to ensure compliance with project specifications and standards.

- Address and resolve any quality-related issues promptly.

5. Troubleshooting & Problem-Solving:

- Diagnose and resolve faults or issues in electrical systems and equipment efficiently.

- Collaborate with other supervisors or engineers to address interdisciplinary challenges.

6. Documentation & Reporting:

- Prepare and maintain accurate documentation of electrical work, including reports, progress updates, and inspection checklists.

- Provide feedback to project managers and clients on electrical progress and challenges.

Skills:

- Strong knowledge of electrical systems, equipment, and industry codes (e.g., IEC, NEC).

- Proficiency in reading and interpreting electrical schematics, blueprints, and technical manuals.

- Strong leadership and team management abilities.

- Excellent problem- solving and decision-making skills.

- Familiarity with energy management systems and electrical testing tools.

Experience:

- Minimum 5 years of experience in a supervisory role within Power Plant or Oil & Gas industries.

- Proven experience with electrical systems, including high-voltage installations and automation systems.

We are seeking skilled Mechanical Fitters to join our team in delivering high-quality services for Power Plant and Oil & Gas projects. The role involves the assembly, installation, maintenance, and repair of mechanical equipment, ensuring compliance with industry standards and Singapore MOM safety regulations. The ideal candidate will have technical expertise, attention to detail, and a strong commitment to safety and quality.

Key Responsibilities:

1. Installation & Assembly:

- Assemble, install, and align mechanical components such as pumps, turbines, heat exchangers, piping systems, and structural supports.

- Read and interpret blueprints, technical drawings, and manuals to ensure precise work execution.

2. Maintenance & Repairs:

- Conduct preventive and corrective maintenance on mechanical systems and equipment.

- Diagnose mechanical issues and carry out repairs, including replacing worn- out or damaged components.

3. Inspection & Testing:

- Perform equipment inspections to identify potential issues and ensure compliance with safety and performance standards.

- Conduct functional tests and pressure tests to validate equipment integrity.

4. Safety &Compliance:

- Adhere to workplace safety protocols and MOM regulations, including the proper use of PPE.

- Participate in toolbox meetings, hazard assessments, and emergency drills.

5. Documentation:

- Maintain accurate logs and reports of maintenance, repair activities, and inspection findings.

- Provide feedback on equipment performance to supervisors and technical teams