Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples,
• mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement
• management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without
• deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such
• as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of
• works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and
• implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to
• achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 6 years of local working experience OR
• Diploma in Architecture with minimum 8 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

Job Description & Requirements

1. Review Architectural drawings, prepare catalogues and drawings from design intent and submit for approvals

2. Assist Project Manager in monitoring and managing the day-to-day operations of project to ensure that the works are executed to the required quality standard and conform with the drawings

3. Issue drawings to subcontractors and liaise with them for technical issues

4. Liaise with consultants / sub-contractors/ client's representatives on the project matters

5. Attend regular meetings with owner/client/contractors/ sub-cons on the project related matters

6. Work with the Architectural Consultants on the Authority submissions to statutory boards.

• Supervision and check all architectural works and coordinate with engineers, archi-coordinators, sub-cons and inspection with RTOs
• Supervise and inspect all Architectural works to ensure quality of work
• To monitor and ensure all works are carried out in accordance to approved drawing/specification and complete within schedule time
• Be responsible for the planning and scheduling of time and resources for building construction projects
• Responsible for all on-site technical and engineering matters
• To ensure works carried out meet company’s quality standards & contractual requirements
• To monitor project progress and schedule and track the progress and time required when there is a delay/disruption to project
• To develop detailed workplans and cost estimations of approved items to forecast cost and workforce requirements to allow efficient scheduling of works
• Execute overall scheduling and specific planning work
• Design, implement progress and schedule control systems for the project according to set requirements
• Experienced in performing construction planning, and to co-ordinate with the client, sub-contractors, consultants and Authorities on all project aspects
• To Assist Project Manager in monthly progress claims and monthly progress reports
• To ensure that all requirements by Clients, Consultants and relevant Authorities are adhered and established
• Able to interpret drawings and details
• Supervise and lead a team of workers and sub-contractors to perform on-site works
• Assist in manpower and resource scheduling and deployment, daily man-hours returns and coordinate in all aspects of site issues
• Keep record of the daily manpower and productivity
• Monitor job progress and ensure quality work at targeted schedule

Requirements

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Architecture or equivalent.
• Required language(s): English
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Executive specialized in building construction or equivalent.

1. Responsible for reviewing and preparing accounting vouchers and other accounting processing work, verifying and processing transactions

2. Responsible for the company's tax declaration work, maintaining good communication with the tax department, timely understanding changes in tax policies, and ensuring the company's tax compliance

3. Cooperate with the company's financial management work, complete the preparation of internal financial management reports, and provide reference basis for the company's daily management decisions

4. Company personnel salary accounting and other related matters.

Job Requirement:

1. Bachelor's degree, major in financial management, accounting or related fields

2. Have more than 3 years of experience in financial accounting management, with good accounting knowledge and skills, proficient in Office software

3. Possess basic financial accounting analysis skills, able to analyze and optimize the company's financial situation

4. Strong communication and coordination skills, able to effectively communicate and cooperate with other departments

5. Strong written and oral communication skills, good at communication, proactive management and team spirit.

6. Singaporean or Singapore PR preferred

Roles & Responsibilities

Electrical Supervisor Responsibilities:

• Plan and schedule projects
• Estimate the time and materials needed to complete projects
• Maintain records and documentation relating to the ongoing completion of projects
• Supervise electricians and aircon wokers as they work, providing guidance and instruction as needed
• Ensure that work complies with all safety requirements
• Perform electrician tasks as needed
• Initiative & Innovative needed

Electrical Supervisor Requirements:

• Diploma / Higher Diploma in electrical / Aircon or a related field experience is strongly preferred
• Aircon knowladge is advandage
• Previous experience as an electrical supervisor is highly beneficial
• In-depth knowledge of the electrical industry
• Strong leadership skills
• Familiarity with relevant state and federal codes and safety requirements
• Basic technical literacy

Roles & Responsibilities

1. Co-ordinate meetings & daily briefings at work-site/locations.

2. To guide Juniors and supervise supervisors.

3. Equivalent Degree.

4. Minimum 2 to 3 years of working experience in Electrical Installation Works.

5. Related working experience in power and electrical industries.

6. Knowledge in relevant software and MS Office & engineering, planning and designsoftware.

7. Checking/Update all installation drawings and prepare relevant schedules.

8. Prepare cost estimation, budget and control and to check sub-contractor’sprogress claim

9. Monitor and supervise work progress, ensure that safety regulations are adhered

10. Involved in testing and commissioning.

11. Knowledge in Singapore Standards and other International Standards.

12. Technical investigations & Perform site survey.

Duties & Responsibilities:

Cost Estimation:
•Prepare detailed cost estimates for MEP (Mechanical, Electrical, Plumbing) projects;
•Analyze and evaluate project specifications and drawings to determine the scope of work and associated costs;

Quantity Take-off
•Perform quantity take-offs for materials and labour required for MEP installations;
•Collaborate with project teams to ensure accurate and comprehensive quantity assessments;

Budgeting and Cost-control
•Develop and manage project budgets, ensuring cost control throughout the project lifecycle;
•Monitor and report on cost variations, providing recommendations for cost-saving measures;

Tendering and Procurement
•Assist in the preparation of tender documents and participate in the procurement process;
•Evaluate subcontractor and supplier bids, ensuring competitiveness and adherence to project requirements;

Contract Administration
•Administer and manage contracts related to MEP works, including variations and claims;
•Monitor contractual compliance and resolve any disputes that may arise during the project;

Value Engineering
•Identify opportunities for value engineering to optimize project costs without compromising quality;
•Work closely with design and construction teams to implement value engineering recommendations;

Risk Management
•Identify and assess potential risks related to cost and contract issues;
•Develop strategies to mitigate risks and ensure project success;

Cost Reporting
•Generate regular cost reports to keep stakeholders informed of project financial status;
•Provide analysis and recommendations based on cost reporting data;

Collaboration
•Collaborate with architects, engineers, contractors, and other project stakeholders;
•Participate in project meetings and contribute to the overall success of the project;

Regulatory Compliance
•Ensure compliance with relevant regulations and standards in MEP construction;
•Stay updated on industry trends, codes, and best practices;

Ad-Hoc
•Undertake cost analysis for repair and maintenance project work;
•Other Ad-hoc duties as assigned by the HOD.

Qualifications & Experience:
• Degree / Diploma in Quantity Surveying / Engineering or equivalent from a recognized University.

• Minimum 5 years of related working experiences in industrial, commercial or data-centre projects.

• Good working knowledge in Mechanical and Electrical.

• Organizational skill with attention to detail, adaptable and flexible.

• Good communication and facilitation skills.

• Ability to work well in a team, independently and demonstrate initiative and commitment.

Job Description:

· Preparing tenders for clients and commercial bids to help bring in new business

· Developing and presenting project proposals

· Meeting with clients to find out their requirements

· Producing plans and estimating budgets and timescales

· Discussing, drafting, reviewing and negotiating the terms of business contracts

· Agreeing budgets and timescales with the clients

· Managing construction schedules and budgets

· Dealing with any unexpected costs

· Attending site meetings to monitor progress

· Acting as the main point of contact for clients, site and project managers

· Working with third parties to ensure that everyone understands their roles and responsibilities

· Making sure construction projects meet agreed technical standards

· Liaising with technical and financial staff, sub-contractors, legal teams and the client’s own representatives

· Working on-site and in an office.

· Work with Director & Project Team to resolve any contractual disputes arising in the projects. Investigate and resolve or refer as appropriate disputes/complaints in accordance with contractual requirements in a timely manner

· Oversee overall planning and execution to ensure optimization of resources and manpower and invoicing at the end of a project

· Provide advice on contractual claims and procurement strategy.

· Analyze outcomes and write detailed progress reports.

· Value completed work and make progress claims.

· Track of any variations for ongoing projects that may affect costs.

· Undertake cost analysis for repair and maintenance project work.

· Prepare and submit catalogues and sample boards.

Other ad-hoc duties as assigned by the HOD’s.

Job Requirement

Qualifications & Experience:

· Degree / Diploma in Quantity Surveying / Building or equivalent from a recognized University.

· Minimum 5 years of related working experience in residential and industrial projects.

· Good working knowledge in Mechanical and Electrical.

· Good knowledge of Singapore health and safety rules and regulations.

· Ability to use software tools for costing and budgeting.

· Organizational skill with attention to detail, adaptable and flexible

· Good communication and facilitation skills.

· Ability to work well in a team as well as independently and demonstrate initiative and commitment.

· An understanding of the construction industry

· An understanding of legal documentation

· Maths and IT knowledge

· Strong leadership skills

· Business management skills

· The ability to use your initiative

· Good verbal communication skills

Responsibilities:

• Coordinate C&S designs and ensure compliance with project specifications and local regulations.
• Collaborate with architects, engineers, and contractors to ensure alignment between C&S designs and other disciplines.
• Review and provide input on civil and structural design drawings and documentation.
• Resolve design issues during construction and provide technical support to the site team.
• Ensure the integration of C&S designs with the architectural and M&E (mechanical & electrical) systems.
• Conduct design coordination meetings with consultants and project stakeholders.
• Monitor design progress to ensure timely delivery of drawings and documents for construction stages.
• Ensure quality control and adherence to safety standards in civil and structural design implementations.
• Prepare reports and updates on C&S design progress for project management.

Requirements:

• Bachelor’s degree in Civil Engineering, Structural Engineering, or a related field.
• Over 5 years of experience in civil and structural design coordination, preferably on large-scale construction projects.
• Experience in working with multidisciplinary teams and coordinating between design and construction teams.

Responsibilities:

• To manage and coordinate production of Quality BIM Models and construction documents with minimal supervision
• Manage and deliver a fully coordinated federated model in agreed formats
• Assists BIM Manager in the implementation of BIM
• Assist BIM Manager to update and revise BIM Models throughout the project life cycle
• Ensure BIM Models are modelled with correct BIM parameters and attributes for BIM base quantification and 4D simulation
• Collaborate with team and other relevant departments to ensure all drawings are in order as per design requirements
• Coordinate with Consultants, SWCs & sub-contractor
• Use of BIM for coordination, sequencing, constructability and as-built
• Review design and fabrication models and drawings
• Perform clash checks
• Perform QC before release and exchange of BIM Models

Requirements:

• Diploma or equivalent in C&S/ Architectural/ M&E/ Building services
• At least 1 years of working experience in the related field is required
• Formally trained in BIM or equivalent modelling training certification
• Proficient in BIM/ Revit (Architectural/ Structural and Reinforcement/ MEP modelling and Navisworks
• BIM Coordination experience using Autodesk/ Bentley software

If you are not invited for an interview within 4 weeks, we regret that your application was not suited to this vacancy.

For more company information, please feel free to visit: http://www.stecs.com.sg/

Personal data collected will be used for recruitment related purposes only and will be destroyed after 12 months.

Responsible:

• Fetch workers from/to dormitory to jobsite (13 seater van/ MVP car/ mini van)
• Ensure that all deliveries have been signed and delivered to the correct recipient
• Help in running office errands
• Responsible for proper daily vehicle maintenance check and upkeep of the vehicle
• Housekeeping and cleanliness of the vehicle
• Send vehicle for routine servicing maintenance, VICOM/STA inspection, and repair work when required
• Assist with ad hoc assignments

Requirements:

• Possess a valid Class 4 driving license
• Valid bus vocational license for shutter bus/mini van
• At least 2 Year(s) of working experience in this position, preferably in construction.
• Able to start work immediately or with short period
• Able to drive to Malaysia (Johor)
• Mutli opening available
• Knowledge of traffic laws

If you are not invited for an interview within 4 weeks, we regret that your application was not suited to this vacancy.

Personal data collected will be used for recruitment related purposes only and will be destroyed after 12 months.

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections.
• Conduct regular inspections to ensure works are in compliance with method statements (in accordance to BCA’s Good Industry Practice)
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• Prepare relevant QA/QC reports
• Implement QA/QC plans and ensure PPVC quality before delivery
• Ensure the functionality of the product before handing over to buyers
• Assist in preparing for QM submissions
• Assist in yearly ISO audits
• Assess, feedback on the construction process and procedures
• Execute quality control as per site specific materials and Works Quality Plan.
• Conduct relevant training for sub-con and internal staff.
• Issuance and handling of Site Memo.
• Monitor undertaken corrective and preventive actions against non-conformities.
• Arrange and liaise with BCA for CONQUAS/QM assessments.
• Recommends solutions for critical and/or frequent recurring defects to Project Team.
• Ensure all the method statement used has obtained approval from the clients and consultants.
• Follow-up all the required tests as per contract requirement.
• Attend regular site meetings – QAQC, Landscape Coordination Meeting and Client Meeting.
• Attend off-site inspection – Precast and Structural Steel Works (Malaysia and Singapore Factory)
• Follow the developer’s Quality Inspectors (QI) and Customer Service Officers (CSO) for inspection prior to unit handover to owners.
• Attend to unit owner’s defects during Defect Liability Period.
• In-charge of the handover of the common areas to management team.

Job Requirements:

• Candidate must possess at least a degree related to QA/QC knowledge
• Prior experience related to construction industry (Condominium projects etc.)
• Good knowledge of construction quality control/assurance

Job Description

• To manage and to oversee the day-to-day construction activities of the project.
• To develop and formulate cost-effective plan for timely completion of project within the budget and to implement execution plan.
• Monitor the construction productivity, schedule, performance and investigate reasons for any unsatisfactory performance. To also provide recommendations and measures for improvement.
• Manage subcontractors’ works to ensure compliance with contract requirements and the quality of work. To monitor the quality of project delivery to ensure it meets the project requirements and regulations.
• Liaise with authorities, consultants and subcontractors for matters related to the construction of the project.
• Ensure that all workplace safety standards, rules and regulations are being complied at the construction sites and throughout the project.
• Responsible to site progress according to schedule set.
• To lead a site construction team in ensuring smooth execution of work.
• To ensure works carried out meet company’s quality standards & contractual requirements.
• To review and approve materials requisitions.
• Execute overall scheduling and specific planning work.
• Design, implement progress and schedule control systems for the project according to set requirements.
• Construction planning, and to co-ordinate with the client, sub-contractors, consultants and Authorities on all project aspects.
• Ensure safe work procedures and environmental control measures at site.

** Minimum 5 years of experience in Construction / Building / Engineering industry in Singapore.

Job Description & Requirements

• Be responsible for the planning, scheduling, controlling and coordinating of mechanical and electrical works
• Monitor, track, and provide timely project progress reports to the management
• To supervise and control M&E sub-contractors to carry out their works accurately and timely and to ensure that works on site are carried out according to specifications / drawing
• Liaise and hold meetings with clients and M&E consultants on technical resolution, inspection & submission
• Evaluate costing received for M&E works
• To monitor M&E work documents and shop drawings coordination
• Able to ensure that all requirements by Clients, Consultants and relevant Authorities are adhered and established
• Review & co-ordinate subcontractors’ shop drawings and quotations in terms of mechanical and electrical compliance for calling of sub-contract works
• Submission and coordination between sub-contractor, consultants and Project Team
• Supervise and inspect all mechanical and electrical works to ensure quality of work
• To liaison with Consultants for technical clarification
• To monitor and ensure all works are carried out in accordance to approved drawing/specification and complete within schedule time
• To assist in the deployment and storage of M&E materials, plant and equipment delivered by the M&E subcontractors
• Contract administration of M&E subcontracts
• To provide support and arrange the necessary required inspections

1) Degree / Diploma in Mechanical / Electrical Engineering
2) Minimum 2-5 years of experience in Construction / Building / Engineering industry

1. Responsible for the management and handling of the company's legal affairs, including contract drafting or review, legal document drafting, dispute resolution, intellectual property management, compliance review of company rules and regulations, etc., to ensure the compliance of the company's business and control of legal risks

2. Track and study the changes and updates in relevant laws and regulations, conduct risk assessments in a timely manner, and develop corresponding response strategies

3. Assist the company in resolving legal disputes and controversies, and safeguard the interests of the company,

4. Answer legal questions during the company's operation process and provide legal advice and assistance to other departments

5. Establish and maintain good cooperative relationships with government departments and law firms, and obtain necessary legal support and consulting services.

Job Requirement:

1. Bachelor's Degree in Law/Legal Studies/Construction law or related in relevant industry

2. With work experience of over 2 years from law firm or corporate that deals with legal matter.

3. A team player with the willingness to be involved beyond the formal job remit

4. Able to converse in both English & preferably Mandarin as required to liaise with Mandarin speaking clients

5. Strong written and oral communication skills, good at communication, proactive management and team spirit.

6. Singaporean or Singapore PR preferred

• Up to date knowledge of market price trends.
• Ability to administrate on ACMV / tender and tendering procedures.
• Good strategies, planning and control of all tendering activities.
• List the scope of work and commercial requirements in order to determine the risks of the projects.
• Prepare and follow up on the Request For Quotations to suppliers / sub-cons in order to ensure tender costing and technical data to be submitted on time.
• Take off Bill of Quantities from the ACMV Drawings, Points of Schedules and Architectural drawings.
• Collate price comparison, costing summary and technical proposal in order to prepare tender submission.
• Study the addendum and / or corrigendum documents and update costing summary with technical proposal accordingly.
• Maintain relevant documentation in an orderly and proper manner.
• Attend site briefing / site meeting / post tender interview when necessary.

Job Responsibilities:

• Establish BIM implementation strategy, requirements, process, workflow and needs for construction projects.
• Optimise design and downstream construction processes through the implementation of BIM and VDC concepts beyond 3-D modelling and conflict resolution.
• Plan, manage and maintain the 3-D BIM data and complexity of content to meet project deliverable requirements.
• Embrace a holistic approach and strategically plan for BIM execution in green building projects.
• Manage all drawings (e.g. Shop drawings, Layout Plans drawings and As-Built drawings) with all respective trades (e.g. Architectural, Structural, MEP and Specialist Sub-contractors works), as well as to resolve all design issues and de-conflict clashes in BIM drawings.
• Lead and support the projects’ BIM Team(s) including managing of sub-contractors’ BIM Team(s).
• Attend and chair design technical meetings with Clients, Consultants and Sub-contractors.
• Engage project teams to innovate and leverage advanced tools to solve project problems.
• Assist the QS department in variation order claims related to design changes.
• Develop a training program for design managers and engineers to improve the use of BIM authoring tools.
• Any other duties that may be assigned.

Requirements:

• Degree / Master in Architecture / Engineering / Construction or relevant field.
• Minimum 10 years of local working experience in the related field with at least 6 years of hands-on experience in handling BIM projects.
• Trained and proficient in AutoCAD, Revit / BIM software in Architectural / Structural / MEP and other visualization and simulation applications.
• Experience in implementing the BIM adoption of design authoring and collaboration technology tools in construction projects.
• Good understanding of the Singapore Construction Industry regulations (e.g. Building code, BCA, URA and LTA).
• Experience in leading a BIM Team in Shop drawing production, coordination and document control.
• A positive team leader with good judgment, prompt decision-making abilities and ability to meet tight deadlines.
• Solid organizational skills including attention to detail and multi-tasking skills.
• Excellent written and verbal communication skills.
• Candidate with knowledge in Specialist trade works (e.g. Curtainwall, Stone and Interior Design works) will be an added advantage.

Roles and responsibilities:

• Degree or Diploma in Mechanical/Electrical Engineering.
• Minimum 6 Years of Local Experience with Main Contractor in both commerical and institutionl building Projects.
• Able to communiate with consultants and contractors on technical matters
• knowledge in local codes of practice
• Well experinced in making shop drawings.
• Experience in managing A& A projects independently
• Making Electrical plans and drawings.
• Overseeing Electrical Installation
• Troubleshooting Electrical Issues.
• Ensuring Electrical Safety
• Commissioning Electrical Systems
• Budgeting, Estimation, and Purchase of Electrical Components
• Testing and Installation of Systems
• General Electrical Maintenance
• Working on High-Voltage Lines and Equipment
• Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.
• Work closely with site foreman on project progress and ensure timely work arrangements.
• Attend weekly or monthly meeting on work progression and prepare monthly meeting progress report.
• Understand AutoCAD and CAD measurement
• Able to read and understand engineering drawings and specifications.

Overview

As a WSH Coordinator, you will assist the Project Manager in the daily operation of executing the company’s safety regulations and practices in the workplaces.

Responsibilities

1) Assist WSH Officer on safety and health matters.

2) Execute appropriate safety measurements in accordance with the Workplace Safety & Health Act.

3) Liaise closely with Project Managers, main contractors, contracts and authority, etc. on all safety and health issues.

4) Assist in accident / incident reporting and investigations as well as hold toolbox meetings and all WSH matters execution.

5) Perform daily inspection to ensure compliance to prevailing MOM regulations and Company Construction work policies.

6) Coordinate and maintain records of safety orientation and daily toolbox meetings.

7) Ensure safe work practices are adhered to by all parties in the daily site activities.

8) Perform daily inspection to ensure compliance and inform Project Manager accordingly.

9) Attend to all feedback on safety irregularities and inform the WSH Officer accordingly.

10) Ensure all safety legislation and in-house safety rules and regulations.

11) Ensure all parties at work are following the safe work procedures compliance.

12) Assist Project Manager to liaise with relevant authority visiting / complain or feedback, if necessary.

Requirements

1) At least a Professional certificate / Nitec or equivalent.

2) Must possess at least an Advance Certificate in Workplace Safety and Health by BCA (Level B).

3) At least 1 years of working experience in construction industry.

4) A good team player with good communication skills and multi-tasking.

5) Able to write and speak in English and Mandarin as need to liaise with Chinese Client and workers.

6) Computer literate with MS Word, Excel, PowerPoint, etc.

7) Physically Fit, healthy, hardworking and can work on weekends.

1. Responsible for I&C engineering related matters.
2. Communicate and coordinate with team and all related stakeholders for planning and scheduling to facilitate smooth commissioning at site.
3. Ensure instrument and control elements installation and wire termination are done correctly and within acceptable standard of workmanship.
4. Enforce PSE and MEP to rectify any substandard works to ensure good quality of works for reliable operation.
5. Lead on-site testing and commissioning of chilled water control system, conduct thorough testing, and validation of control system to ensure proper functionality.
6. Documentation and records of T&C.
7. Handover control system to operation team in timely manner.
8. Respond to operational needs, ensure reliable control and monitoring of control system.
9. Configuration and zeroing of instrument, ensure accurate reading received at control system.

Roles and responsibilities

· Assist SPM/PM in execution and managing day-to-day activities

· Monitor work progress in relevance to project schedule

· Coordinate & liaise with clients and site team to ensure the works are performed in accordance with specification & drawings

· Conduct and attend site inspections

· Assist in the requisition of materials, and ensure timely delivery and mobilisation

· Maintain project database and record keeping of all construction documents

· Prepare progress details, estimations and any other reports as required

· Review construction plans and prepare quantity requirements

· Any other ad-hoc duties

· Will be located at site office and may need to travel to different sites

Skill set

· Degree in Civil Engineering or related field of discipline

· Minimum 2 years of relevant working experience in Singapore construction industry (preferably in civil field)

· Proficient in English, MS Office, AutoCad

· Good communication and interpersonal skill

· Self-motivated and able to complete task independently under tight deadline

· Good team player, collaborating on multi-projects of various stages, ensuring deliverables within set times and expectations

· Willingness to learn & grow and able to work under stress

Responsibilities

• Able to perform electrical installation work such as cable laying, modification of electrical circuit & lighting
• Able to carry out all responsibilities of a site supervisor
• Able to attend weekly or monthly meetings with the client
• Able to attend non-schedule or emergency call-up
• To supervise general workers & look after equipment at the site
• To ensure the smooth progress of site works
• To ensure safety & housekeeping standards are maintained
• To ensure all work done meets quality
• All issues concern on-site works

Requirements

• Independent worker
• Responsible & trustworthy
• Good communication & interpersonal skills
• Able to work under pressure
• Strong knowledge of health, safety & environmental regulations

Resposibility:

• Responsible to create technical reports for customer
• Responsible for updating electrical load list for power and lighting system
• Responsible for completing regulatory documents concerning safety issues.
• Support the engineers in monitoring project deliverables and actively engage where project teams would benefit from technical intervention;
• To liaise with respective parties on checking of drawings
• Attending to all site meetings with owner, consultants and main-contractors on all matters relating to the project operation and coordination
• Provide technical advice and assistance to the overall project team as appropriate including Commissioning and Service.

Responsibilities:

• Maintaining good relationship with the owner, consultant and sub-contractors.
• Site management and resolving technical related issues on-site.
• Coordinates with team, consultants and sub-contractors on construction related matters to ensure the project is delivered on time.
• Coordinate with subcontractors on their productivity rate and incorporate into the scheduling process
• Develop schedule and monitoring forms to ensure that all site activities are tracked closely and monitored.
• Conducting regular meetings with all construction staff on the techniques of improving quality.
• Having experience in Land Transport Authority.
• Profession in all SWC Works.

Job Responsibilities

• Supervise on-site architectural work to ensure compliance with design specifications and standards.
• Coordinate with architects, engineers, and contractors to address design-related issues.
• Review architectural drawings, detailing, and specifications, ensuring proper implementation.
• Conduct regular site inspections to ensure quality control and resolve any discrepancies.
• Monitor the progress of architectural work to ensure timely completion of milestones.
• Ensure that materials used conform to approved specifications and drawings.
• Assist in resolving any technical or design issues that arise during construction.
• Ensure compliance with building codes, safety regulations, and industry standards.
• Prepare progress reports and provide updates to project management and stakeholders.

Job Requirements:

• Diploma or Bachelor’s degree in Architecture, Civil Engineering, or related field.
• 3–5 years of experience in supervising architectural works on construction sites.
• Hands-on experience in coordinating with architects, contractors, and site teams for the execution of architectural designs.