Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Duties & Responsibilities:

• Look into the company’s BIM Project Deployment Plan and develop BIM Project Execution Plans, BIM collaboration, documentation, enforcement, monitoring and workflow to meet the project.
• Work closely with project teams to provide solutions for BIM related technical issues. Assist project teams and design teams with BIM implementation
• Set up processes & workflows for efficient delivery of the project BIM deliverables.
• Set guidelines for internal and external model exchanges between project stakeholders and monitor its progress
• Attend client meetings & lead the decision-making process affecting the BIM deliverables
• Liaise and coordinate and other trades for cross-team support on BIM software
• Regularly meet with key project staff to update on progress. Document meeting minutes highlighting key action point. Ensure the issues highlighted are resolved, concluded and monitored for resolution provided by the design team.
• To oversee the BIM Coordination and daily management of BIM project data sets/workflows and project set up
• Collaborate with team and other relevant departments to ensure all drawings are in order as per design requirements.
• Any other duties deemed necessary and as assigned by the Senior Management.

Qualifications & Experience:

• Certificate in AutoCAD Autodesk advanced module.
• Certificate in Revit MEP Autodesk advanced module.
• Higher NITEC / Diploma in Mechanical engineering or equivalent.
• Minimum 3 years of experience in M&E drafting using AutoCAD, Revit and BIM preferably from Construction industry.
• Outgoing personality with strong interpersonal and communication skills.
• Ability to work independently and target oriented in a stressful environment.
• Ability to work well in a team and demonstrate initiative and commitment.
• To be able to converse in English and work effectively with Internal staff including Site Foreman, Supervisors, Engineers, Managers and Client’s BIM representatives.

Project execution processes

Responsibilities:

1. Assist the Project Manager for the execution of awarded projects.
2. Co-ordinate with clients, consultants and main contractors on project plan and implementation.
3. Monitor and carry out quality check on progressive completed work and make recommendation for effective project management.
4. Inspect and evaluate on work performed by subcontractors.
5. Prepare project reports and check on updated drawing completion.

Requirements:

• Diploma / Degree in Electrical Engineering, Mechanical Engineering or related field.
• Preferable with minimum 1-3 years of working experience in M&E field.
• Ability to work independently and willing to travel based on the project site locally.
• Basic computer skills: Microsoft Office and Microsoft Project.
• AutoCad competency and possession of relevant safety certificates is an advantage.

Job Responsibilities:

• Liaise with the Main contractors on the planning and progress of M&E work to meet the project schedule
• Supervise M&E works to ensure it adhere to specifications, are completed on schedule, within budget, and accurately documented.
• Undertake additional tasks as required to support operational needs and project requirements.

Requirements:

• Background in M&E works. Diploma in Civil/Mechanical Engineering/ relevant on-job experience is a plus.
• Minimum 5 years of working experience in similar role within the construction industry
• Strong building M&E knowledge with hands-on experiences.
• Knowledge in design and building project and relevant code of practice.
• 6 day workweek. Shift work might be required during critical phase.
• Willing to work on-site

Roles & Responsibilities

PG Engineering Pte Ltd is looking for a competent Project Engineer for process and construction & industrial projects in island wide. The project engineer is responsible for and required to be the core interface with the Team in support of our Client, and to ensure the highest level of service to our Client. The project engineer will oversee, monitor and coordinate the project to ensure it is completed on or before time, to budget and to the specified quality standards and coordinate with project managers.

From our Singapore office we currently provide a range of project management services to International Corporations and Government entities including the following:

• Strategic Project Definition and Advisory Services;

• Client Representative Services;

• Due Diligence studies;

• Cost and Budget;

• Planning and Programme Management;

• Project Management;

• Design Management;

• Procurement Management;

• Construction Management;

* Management handling with upgrade;

* Management control c/w procurement and overall projects team;

Job Responsibilities:

The role involves the execution of duties to the highest possible standards. Your primary responsibility will be to lead and perform all of the activities necessary to plan, procure, manage and administer all issues related to power & construction and industrial site work.

Your duties will involve working closely with project staff and contractors across multiple technical disciplines requiring the supervision of numerous simultaneous tasks to meet very specific and immovable milestones. You will be privy to confidential information by necessity.

You will treat all such information with the highest levels of confidentiality and will perform your role with integrity and honour at all times.

It is expected that the Project engineer role will require, but not be limited to the following key functions:

• Planning/Scheduling

• Implement a high-level effective project management framework and method statement, incorporating necessary review processes as required

• Review the master programme and other reports to ensure timeline is met

• Secure resources, suppliers, product for the Client as required

• Monitor the design, construction, and dismantling programme and identify opportunities for improved delivery

• Risk Management

• Proactively identify potential problems, conflicts, design and delivery issues using risk management tools and skills to mitigate impact on the project

• Identify Health and Safety issues and to report as per procedure

• Site, Oversee the effective operation of the activities related to the P&C Contracts through conducting regular site visits and quality checks

• People, Manage and direct the P&C team to provide overall superintendence and ensure that the project team staff, contractors, etc., work well and provide a supportive environment for the achievement of the project

• Holding weekly staff meeting with P&C team, monitoring and reviewing staff working hours and writing performance reviews for P&C staff

• Contract Management • Negotiate and convert contracts as required by the project

• Oversee the award of contracts and ensure the client is adequately protected

• Scheduling, minuting and issuing various project meetings and ensure minutes are actioned in a timely manner

• Provide regular and accurate reporting on the project progress, costs and quality

• Review and oversee the management of all P&C contracts and ensure that there are no major gaps or issues in providing the required P&C deliverables

• Monitoring and reviewing all P&C work instructions and variations ensuring that all information is accurate, recorded and follows the designated project approval process

• Manage and document changes/variations following approval by Client • Ensure contractors and consultants are paid in accordance with contract schedules

• Review any procurement requirements and provide all necessary P&C technical support to the procurement process • Client Management

• Take the leading role in interfacing with the Client and contractors on all P&C matters at all project stages

• Actively seek and implement strategies to improve the client’s position in regard to return and value

• Identity and resolve disputes quickly and reasonably

• Develop and maintain excellent relationships with Client, authorities, consultants, contractors and adjoining property owners/stakeholders

• Reporting

• Monitoring, reviewing and implementing appropriate document control processes in line with quality control procedures

• Preparing monthly status report input on all P&C activities and including a detailed analysis of power consumption and utilization

And any other work-related tasks or duties deemed required and assigned by the line manager.

Job Requirements:

• Electrical & Mechanical Engineering qualification with minimum 6 -10 years relevant experience

• Master Degree in Electrical / Mechanical systems in the relevant field in the process & construction industry

• Contract administration experience

• Excellent overall knowledge of most P&C systems, Knowledge in innovative components introduce and handling.

• Knowledge in electrical power distribution, Smart DB’s, PLC / SCADA programming

• Experience working in construction & industrial design firms

• Manage and coordinate the inputs of project stakeholders to ensure the successful delivery of the project

• Assess and resolve site planning and coordination issues

• Apply quality management principles and processes

• Possess a keen eye on detail to deliver the highest quality of standard

• Apply risk assessment and management principles and processes

• A capacity to communicate professionally and confidently with a diverse range of people at all levels

• Strong written communication skills, with a demonstrated ability to draft reports, minutes, correspondence, procedures, processes and forms

• Sound literacy in computer software, including the Microsoft Office range. Excellent knowledge of Word and Excel • Ability to read technical drawings

• Ability to work with limited supervision

• Flexibility and ability to work with different areas of the business Punctuality with attendance and with delivering tasks on time.

Job Descriptions

• Lead full spectrum of Project Management including but not limited to Overall Engineering Design, Construction, Manpower Planning, Testing and Commissioning.
• Design Development relating to Plumbing, and Sanitary.
• Predict resources needed to complete project.
• Budget and Cost Control.
• Negotiating contracts with external vendors to reach profitable agreements.
• Order and manage materials and equipment.
• Coordination and liaison with Clients, Consultants, Architect, Authorities, Project teams, and Subcontractors.
• Ensure all legal requirements, building and safety codes, safety inspections, city guidelines, and local and state regulations are met.
• Ensure that projects are completed on time and within budget.
• Ensure work is done in compliance with all relevant building and safety codes
• Obtain necessary permits, approvals, and other regulatory prerequisites.
• Any other business related matters assigned by the Management/Head office.

Job Requirements

• Degree/Diploma in Civil Engineering, M&E Engineering, Building Construction, or a related field.
• BCA Certificate in Plumbing & Pipefitting is an advantage.
• Registered Licensed Plumber with a minimum of 3 years of experience and a proven track record.
• Minimum 8 years of experience in plumbing and sanitary construction.
• Strong leadership, management, self-motivation, and ability to work independently.
• Excellent communication skills across all levels.

Please apply via MyCareerFuture or email your updated CV to [email protected].

Job Description/ Roles & Responsibilities

• You will liaise closely to the Project Managers on workplace safety, health to maintain a high level of safety at the sites.
• Develop, implement, and monitor company EHS Programs and policies to ensure compliance with regulations.
• Conducts regular site safety inspection and enforce compliance of prevailing MOM Safety Acts and Regulations
• Enforces all safety requirements and in-house safety rules and regulations.
• Conduct monthly Safety committee meetings.
• Continuous improvement on EHS system through the effective implementation of ISO 14001 and OHSAS 18001 management standards
• Review and maintain site's environmental, health and safety records.
• Carry out training to all workers, staff, and site personnel on EHS.

Job Requirements

• Minimum Diploma or Degree in Engineering/ Environmental, Health and Safety or relevant courses
• Must be registered WSHO with MOM.
• Minimum 2 years relevant working experience in a construction industry.
• Excellent team player, good interpersonal skills, and a “can-do” attitude
• Able to communicate with people of all levels.
• Willing to work for night shift (Permanent)

- supervise Plumbing & Sanitary installation works

- resolve engineering issues

- attend meetings with supplier, sub contractor, main contractor, consultant, and authority

- submit reports

- attend inspections with supplier, sub contractor, main contractor, consultant, and authority

- prepare progress claim to main contractor / client & attend meetings

- prepare & certify progress claims of sub contractor & suppliers

JOB DESCRIPTION

• Responsible to answer / reply customer enquiry and email.
• Responsible for update records
• Assist in all documentation works.
• Coordinate required work between departments.
• Assist on safety document
• Planning schedule
• arrange course for worker

REQUIREMENTS

• Immediate availability performed.
• Proficient in microsoft word & Excel.
• Team Player & possess good communication skills
• working day 5 days ( Monday to Friday 8:00 am to 5:00PM )

Job descriptions

1. To source for Supplier to rent or purchase of machineries and spare parts.

2. Co-ordinate with PE to Renew Crane & Excavator LM Cert.

3. Oversee the repair & maintenance of company’s machinery.

4. Issue Purchase Order to Supplier (Rental & Purchase).

5. Coordinate between Site Personnel and Supplier for the delivery/off-hire/repair of machineries.

6. Responsible for the collecting DOs from site for processing of payment.

7. Compilation of Cost of Machinery Rental for Monthly Report.

8. Checking and calculation of Machine Operators Timesheet.

9. Perform other procurement duties as assigned by Reporting Manager.

Job Requirements:

3 years working experiences.

Relevant certificates

Microsoft Office (Basic office software)

Experience in Purchasing

Other information:

Working location at Bugis

To Apply

Please submit your resume in Microsoft Word and indicate the below information:

Current Salary & Expected Salary

Availability to Commence Work

Type of Projects handled.

Duties & Responsibilities:

Cost Estimation:
•Prepare detailed cost estimates for MEP (Mechanical, Electrical, Plumbing) projects;
•Analyze and evaluate project specifications and drawings to determine the scope of work and associated costs;

Quantity Take-off
•Perform quantity take-offs for materials and labour required for MEP installations;
•Collaborate with project teams to ensure accurate and comprehensive quantity assessments;

Budgeting and Cost-control
•Develop and manage project budgets, ensuring cost control throughout the project lifecycle;
•Monitor and report on cost variations, providing recommendations for cost-saving measures;

Tendering and Procurement
•Assist in the preparation of tender documents and participate in the procurement process;
•Evaluate subcontractor and supplier bids, ensuring competitiveness and adherence to project requirements;

Contract Administration
•Administer and manage contracts related to MEP works, including variations and claims;
•Monitor contractual compliance and resolve any disputes that may arise during the project;

Value Engineering
•Identify opportunities for value engineering to optimize project costs without compromising quality;
•Work closely with design and construction teams to implement value engineering recommendations;

Risk Management
•Identify and assess potential risks related to cost and contract issues;
•Develop strategies to mitigate risks and ensure project success;

Cost Reporting
•Generate regular cost reports to keep stakeholders informed of project financial status;
•Provide analysis and recommendations based on cost reporting data;

Collaboration
•Collaborate with architects, engineers, contractors, and other project stakeholders;
•Participate in project meetings and contribute to the overall success of the project;

Regulatory Compliance
•Ensure compliance with relevant regulations and standards in MEP construction;
•Stay updated on industry trends, codes, and best practices;

Ad-Hoc
•Undertake cost analysis for repair and maintenance project work;
•Other Ad-hoc duties as assigned by the HOD.

Qualifications & Experience:
• Degree / Diploma in Quantity Surveying / Engineering or equivalent from a recognized University.

• Minimum 5 years of related working experiences in industrial, commercial or data-centre projects.

• Good working knowledge in Mechanical and Electrical.

• Organizational skill with attention to detail, adaptable and flexible.

• Good communication and facilitation skills.

• Ability to work well in a team, independently and demonstrate initiative and commitment.

Duties & Responsibilities:

• Lead EHS department.
• Develop, review, revise, maintain and implement EHS Management System.
• Ensure legal compliance as per statutory requirements.
• Conduct regular EHS inspections and audits.
• Manage contractor from the EHS perspective.
• To investigate all incidents on the work site and implement correction actions.
• Review and revise all risk assessments to ensure compliance.
• Able to drive EHS culture in the company
• Conduct routine checks on general safety practices and propose corrective actions and measures to be taken.
• Ensure adequacy, effectiveness and readiness of fire protection system and Emergency Response Team management system for Office and Factory.
• Ensure inspection and review of all project sites activities and operation (includes Main office and 15 Changi Factory) and alert relevant Section Head of any machinery, equipment, appliance, activity or process used in each department that exposes any person to the risk of bodily injury, and to recommend appropriate corrective measures.
• Promote safe and healthy working conditions through education, awareness campaigns, training courses, drills, competitions, contests and other activities.
• Liaise with statutory bodies on EHSS-related licenses and permits and keep updated on the latest change in regulations and Acts and be conversant with all waste management regulations, procedures and licensing requirements.
• Conduct fire and safety training to employees.
• Constant update to management of EHSS performance and the continual improvement plan.
• Liaise with 3rd party security service provider and ensure the appropriateness and effectiveness of services rendered to organisation.
• Constant plan-do-check-act on the related EHSS matter of plant's Environmental, Health and Safety Management System and ensure continual improvement/upgrading of the system.

Qualifications & Experience:

• Diploma in Workplace, Safety and Health with 8 years relevant working experience in Construction Engineering Industry.
• Degree in Workplace, Safety and Health with 5 years relevant working experience in Construction Engineering Industry.
• Strong technical competency, good interpersonal and communication skills.
• Ability to work independently and target oriented in a stressful environment.
• Ability to interact effectively with colleagues in other business units.

• Activity and resource planning for site.
• Organizing and motivating a project team at site.
• Controlling time management for site.
• Cost estimating and developing the budget for site project.
• Ensuring customer satisfaction.
• Analyzing and managing project risk.
• Planning and monitoring progress of the project.
• Managing reports and necessary documentation.
• Designing and applying appropriate project management standards.
• Managing the production of the required deliverables.
• Preparing and maintaining project, stage and exception plans as required.
• Managing project risks, including the development of contingency plans.
• Monitoring overall progress and use of resources, initiating corrective action where necessary.
• Applying change control and configuration management processes for the site project.
• Experinces in Singapore Process Plant Industry.

Responsibilities:

· Project coordination and supervision of site installation, testing and commissioning

· Design Development & Calculation for Plumbing, Sanitary and Gas System.

· Preparation of design construction drawings

· Schedule and monitor work program and activity to ensure on-time handover of work and liaise with suppliers/vendors to ensure on-time delivery of materials.

· Work Assessment for Progress Claims and Sub-Contractor’s payment

Requirements

· Diploma / Degree in Mechanical Engineering

· Min 5 years working experiences in design installation and T&C of Plumbing, Sanitary and Gas System

· Good interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

· Ensure thorough understanding of project terms and requirements.

· Review detailed drawings, and provide technical advice on practical design and construction.

· Prepare, schedule, coordinate and monitor the assigned projects.

· Prepare, update and maintain document summary or the necessary documents for projects.

· Prepare and submit the required engineering reports, documents, and drawings to the relevant authorities for approval.

· Update, manage and compile schedules of assigned projects with accurate data and report to the manager.

· Interact with clients to interpret their needs and requirements.

· Cooperate and communicate effectively with the project participants to provide assistance and support, to meet delivery timeline, optimize cost efficiency and meet customer specification.

· Feedback on workflow issues to manager in order to enhance efficiency and productivity.

· Manage all expected / unexpected change orders or deviations during project execution.

· Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.

· Any other job as assigned by the Management from time to time.

Looking for Aircon supervisor and with no experience also welcome.

All ages welcome.

For servicing and maintenance of Airconditioning and mechanical ventilation fan

To maintain the aircondtioning of commercial properties

For Repairing of Airconditioning and mechanical ventilation fan

to repair the ACMV and also to learn new skills

For installation of Airconditioning and mechanical ventilation fan

Job Description & Requirements

• Truck driver with Class 4 License.

• Follow instructions; locate and read location and road maps.

• Pre-inspect truck.

• Pick up goods and materials, verify loads for accuracy, and deliver them as instructed.

• Load and unload cargo.

• Responsible for basic vehicle maintenance; comply with all safe work practices, policies, and processes at all times.

• Complete and verify paperwork for accuracy

• Update job knowledge by participating in educational opportunities, reading professional publications, maintaining personal networks, and participating in professional organizations.

Roles & Responsibilities

PG Engineering Pte Ltd is looking for a competent Project Engineer for process and construction & industrial projects in island wide. The project engineer is responsible for and required to be the core interface with the Team in support of our Client, and to ensure the highest level of service to our Client. The project engineer will oversee, monitor and coordinate the project to ensure it is completed on or before time, to budget and to the specified quality standards and coordinate with project managers.

From our Singapore office we currently provide a range of project management services to International Corporations and Government entities including the following:

• Strategic Project Definition and Advisory Services;

• Client Representative Services;

• Due Diligence studies;

• Cost and Budget;

• Planning and Programme Management;

• Project Management;

• Design Management;

• Procurement Management;

• Construction Management;

* Management handling with upgrade;

* Management control c/w procurement and overall projects team;

Job Responsibilities:

The role involves the execution of duties to the highest possible standards. Your primary responsibility will be to lead and perform all of the activities necessary to plan, procure, manage and administer all issues related to power & construction and industrial site work.

Your duties will involve working closely with project staff and contractors across multiple technical disciplines requiring the supervision of numerous simultaneous tasks to meet very specific and immovable milestones. You will be privy to confidential information by necessity.

You will treat all such information with the highest levels of confidentiality and will perform your role with integrity and honour at all times.

It is expected that the Project engineer role will require, but not be limited to the following key functions:

• Planning/Scheduling

• Implement a high-level effective project management framework and method statement, incorporating necessary review processes as required

• Review the master programme and other reports to ensure timeline is met

• Secure resources, suppliers, product for the Client as required

• Monitor the design, construction, and dismantling programme and identify opportunities for improved delivery

• Risk Management

• Proactively identify potential problems, conflicts, design and delivery issues using risk management tools and skills to mitigate impact on the project

• Identify Health and Safety issues and to report as per procedure

• Site, Oversee the effective operation of the activities related to the P&C Contracts through conducting regular site visits and quality checks

• People, Manage and direct the P&C team to provide overall superintendence and ensure that the project team staff, contractors, etc., work well and provide a supportive environment for the achievement of the project

• Holding weekly staff meeting with P&C team, monitoring and reviewing staff working hours and writing performance reviews for P&C staff

• Contract Management • Negotiate and convert contracts as required by the project

• Oversee the award of contracts and ensure the client is adequately protected

• Scheduling, minuting and issuing various project meetings and ensure minutes are actioned in a timely manner

• Provide regular and accurate reporting on the project progress, costs and quality

• Review and oversee the management of all P&C contracts and ensure that there are no major gaps or issues in providing the required P&C deliverables

• Monitoring and reviewing all P&C work instructions and variations ensuring that all information is accurate, recorded and follows the designated project approval process

• Manage and document changes/variations following approval by Client • Ensure contractors and consultants are paid in accordance with contract schedules

• Review any procurement requirements and provide all necessary P&C technical support to the procurement process • Client Management

• Take the leading role in interfacing with the Client and contractors on all P&C matters at all project stages

• Actively seek and implement strategies to improve the client’s position in regard to return and value

• Identity and resolve disputes quickly and reasonably

• Develop and maintain excellent relationships with Client, authorities, consultants, contractors and adjoining property owners/stakeholders

• Reporting

• Monitoring, reviewing and implementing appropriate document control processes in line with quality control procedures

• Preparing monthly status report input on all P&C activities and including a detailed analysis of power consumption and utilization

And any other work-related tasks or duties deemed required and assigned by the line manager.

Job Requirements:

• Electrical & Mechanical Engineering qualification with minimum 6 -10 years relevant experience

• Master Degree in Electrical / Mechanical systems in the relevant field in the process & construction industry

• Contract administration experience

• Excellent overall knowledge of most P&C systems, Knowledge in innovative components introduce and handling.

• Knowledge in electrical power distribution, Smart DB’s, PLC / SCADA programming

• Experience working in construction & industrial design firms

• Manage and coordinate the inputs of project stakeholders to ensure the successful delivery of the project

• Assess and resolve site planning and coordination issues

• Apply quality management principles and processes

• Possess a keen eye on detail to deliver the highest quality of standard

• Apply risk assessment and management principles and processes

• A capacity to communicate professionally and confidently with a diverse range of people at all levels

• Strong written communication skills, with a demonstrated ability to draft reports, minutes, correspondence, procedures, processes and forms

• Sound literacy in computer software, including the Microsoft Office range. Excellent knowledge of Word and Excel • Ability to read technical drawings

• Ability to work with limited supervision

• Flexibility and ability to work with different areas of the business Punctuality with attendance and with delivering tasks on time.

JOB DESCRIPTIONS:

• Project management involving Plumbing & Sanitary.
• Documentation of method statement and work procedures.
• Review and monitor site construction activities to ensure work completion as scheduled.
• Evaluation, cost estimation & analysis for Plumbing & Sanitary.
• Preparation of design construction drawings.
• Liaison with all parties involved in the project including Local Authorities, Consultants, Architects, Main Contractors, Sub-Contractors & Suppliers.
• Attend site meetings and inspections.
• Any other business related matters assigned by the Management/Head office.

REQUIREMENTS:

• Diploma in M&E Engineering, Building Construction, or a related field.
• BCA Certificate in Plumbing & Pipefitting is an advantage.
• Minimum 05 years of experience in plumbing and sanitary construction.
• Strong leadership, management, self-motivation, and ability to work independently.
• Excellent communication skills across all levels.

Please apply via MyCareerFuture or email your updated CV to [email protected].

Qualifications

1. Bachelor’s degree with at least six (6) years of relevant safety experience in supervising installation and maintenance of roadside and civil/structural works, including coordination with government/utility agencies and contractors.
2. Proven experience as a safety auditor/inspector, ensuring compliance with Environmental, Safety, and Health (ESH) practices.
3. Strong analytical and problem-solving skills, resourceful, and detail-oriented.
4. Highly motivated, proactive, and able to work independently as well as collaboratively within a team.
5. Proficient in Microsoft Office (Outlook, Word, Excel, and PowerPoint).
6. Excellent verbal and written communication skills in English.
7. Willingness to travel frequently between office and project sites.
8. Flexibility to work on-site, including night shifts, based on project needs.

Job Description

1. Site Supervision: Oversee equipment structures, installations, deployments, facilities, and equipment at project sites.
2. Planning & Coordination: Develop resource requirements, work schedules, and Standard Operating Procedures (SOPs) for site activities.
3. Work Review: Assess planned schedules and method statements before site work commences to ensure accuracy and efficiency.
4. Compliance & Standards: Ensure all work aligns with design specifications and complies with safety, health, environmental, and stakeholder comfort requirements.
5. Defect Identification: Inspect site infrastructure for defects, damages, theft, accidents, or other incidents, and take necessary action.
6. Safety Training: Conduct safety training sessions to instill safety awareness among site personnel and enforce adherence to safety regulations.
7. Committee Participation: Actively participate in the Safety Committee to ensure compliance with safety, health, and environmental requirements, including Authority Code of Practices (COP) and WSH, MOH & MOM guidelines.
8. Problem Resolution: Address unexpected issues or challenges that arise on-site, providing timely and effective solutions.
9. Reporting: Prepare detailed reports on site progress, resource utilization, ongoing activities, and other relevant updates.

Responsibilities and Duties:

• Site coordination, project schedule planning, coordinate site works with subcontractor.
• Design and deploy HVAC & Mechanical system and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services
• Prepare and submit operations and maintenance manuals
• Projects management and implementation and troubleshooting

Qualifications:

• Education level: Preferable to hold Bachelor’s degree in Mechanical engineering or HVAC Engineering.
• Job experience. At least 5-8 years of work experience in mechanical and Instrumentation system.
• Strong knowledge of field HVAC Mechanical systems, control systems, and industry standards.
• Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Effective leadership and mentoring skills with a commitment to developing team members.
• Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues.

Job Responsibilities:

• To drive the Company’s truck for the collection and transportation of waste.
• To assist in the collection of waste from clients’ premises.
• To ensure that the containers/bins are properly secured/lashed to the truck, before driving off.
• To assist in the unloading, segregation, and storage of the waste.
• To comply with all Traffic rules, and to practice safe driving habits while driving the Company’s trucks.
• To comply with all anti-littering laws and to this end, ensure that proper containers/bins are used to hold the waste, for safe transportation.
• To perform daily maintenance of the Company’s trucks.
• In discharging the above duties, adhere to all Warehouse Safety Rules, and observe safe work practices.

Requirements:

• Possessing a Class 4 or 5 driving license
• With hook-lift trucks with roll-on container experience preferred.

- supervise Plumbing & Sanitary installation works

- Liaising with authorities

- licensing

- resolve engineering issues

- attend meetings with supplier, sub contractor, main contractor, consultant, and authority

- submit reports

- attend inspections with supplier, sub contractor, main contractor, consultant, and authority

- using autocad / revit / microstation / Aecosim to draw shop drawings, sketches and as built drawings

- coordination of P&S drawings

- quantity take off

- local projects only

- assist to prepare reports

- liaise with sub contractors, suppliers, main contractors and other project team members

- attend meetings with sub contractors, suppliers, main contractors and other project team members

Responsibilities:

• Operate trailer/prime mover and transport loads from point to point.
• Daily checks on vehicle and plan routes.
• Comply with all safe work practices, policies, and processes at all times.
• Any other ad-hoc duties assigned.
• Loading and unloading of goods

Requirements:

• Class 4 / 5 Driving Licence
• Familiar with construction sites
• At least 7-10 years of relevant work experience
• Good interpersonal skills
• Able to work overtime when require including weekends and public holidays.
• 6 days' work week