Safe operation of excavator

● Knowledge of the excavator loading requirements

● Effectively communicate to all site personnel

● Maintain daily logs of equipment usage, maintenance, etc.

● Daily maintenance of equipment

● Identify, report and correct hazards

● Perform tasks maintaining all health, safety and environmental rules and ensure all work is done in a manner which enhances the safety of the work environment

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company’s heavy vehicles to and from the different work sites as required by the work schedule. The heavy vehicles include lorry crane and tipper truck.

The Driver must drive the vehicles to the required work sites punctually.

The Driver must follow the schedule obtained from the Site/ Store Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

The Driver must inform the Site/ Store Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

2 Usage of Company vehicles

The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. If the Driver uses the cash cards for personal use ie lunch parking fee, the Driver must reimburse the Company.

3 Safety

The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

The Driver must inform the Project Director immediately he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

The Driver will drive the vehicles to Inspection Centres as required.

Requirements:

• Class 3 Singapore Driving licence.

• Willing and able to do a lot of night jobs or do night shift as well as day shift. Night shift could be for more than 3 months at a time depending on project.

• Saturday is full day and able to work on Sundays when required.

• 2-3 year experience driving tipper truck with good track record

A Construction Project Manager in Singapore plays a crucial role in overseeing and managing the construction of projects from inception to completion. This position requires strong organizational, leadership, and technical skills, as well as a deep understanding of construction processes and regulations. Here are the key duties and responsibilities of a Construction Project Manager in Singapore:

1. Project Planning and Coordination:

• Define project scope: Collaborate with stakeholders, including clients, architects, and engineers, to define the project's scope, objectives, and deliverables.
• Develop project plans: Create detailed project plans, including timelines, budgets, and resource requirements.
• Set milestones: Establish key project milestones, deadlines, and deliverables to monitor progress.

2. Budget and Financial Management:

• Cost estimation: Prepare and review cost estimates for the construction project, ensuring the project stays within budget.
• Manage project budget: Monitor and control project expenditures, ensuring that costs align with the approved budget.
• Handle procurement: Oversee the procurement of materials and services, ensuring costs are competitive and budgets are adhered to.

3. Team Management and Leadership:

• Manage construction teams: Lead and supervise on-site construction teams, including contractors, subcontractors, laborers, and other specialists.
• Resource allocation: Ensure that labor, materials, and equipment are available and efficiently used to meet project requirements.
• Ensure team performance: Motivate, manage, and assess the performance of the project team, making adjustments as needed.

4. Scheduling and Timeline Management:

• Create construction schedules: Develop detailed construction schedules, outlining all tasks and activities to be completed within the project timeframe.
• Monitor progress: Track the progress of the construction against the schedule, identifying any delays or potential issues.
• Adjust timelines: Make adjustments to the schedule when necessary to address unforeseen challenges or changes.

5. Quality Control and Assurance:

• Ensure compliance with standards: Monitor the quality of work on-site, ensuring that it meets industry standards and regulatory requirements.
• Conduct inspections: Perform regular site inspections to ensure that work is progressing as planned and meets the necessary quality standards.
• Manage quality assurance: Work with quality control personnel to address any quality issues that arise during construction.

6. Health and Safety Compliance:

• Ensure safety regulations: Enforce strict health and safety practices on-site to prevent accidents and ensure the well-being of workers.
• Conduct safety audits: Perform regular safety audits and inspections to ensure compliance with Singapore’s Workplace Safety and Health Act (WSHA).
• Safety training: Organize and implement safety training programs for workers and staff to ensure proper safety protocols are followed.

7. Stakeholder and Client Communication:

• Client liaison: Maintain regular communication with clients, addressing any concerns or changes to the project scope.
• Report progress: Provide regular progress updates to clients, stakeholders, and senior management, including reporting on budget, timeline, and risks.
• Resolve disputes: Address any disputes between stakeholders, contractors, or workers and mediate to reach resolutions.

8. Contract and Vendor Management:

• Negotiate contracts: Oversee the negotiation and management of contracts with suppliers, subcontractors, and vendors.
• Monitor subcontractor performance: Ensure subcontractors meet the terms of their contracts and provide quality work on time.
• Manage agreements: Ensure that all agreements are legally compliant and enforceable under Singaporean law.

9. Risk Management:

• Identify risks: Proactively identify potential risks to the project, such as delays, cost overruns, or regulatory issues.
• Develop mitigation strategies: Formulate strategies to mitigate these risks, ensuring minimal impact on the project’s success.
• Monitor and adjust: Continuously monitor risk factors and adjust plans or approaches to manage or reduce risks.

10. Regulatory and Legal Compliance:

• Ensure adherence to local laws: Ensure compliance with local building codes, zoning laws, and environmental regulations in Singapore.
• Obtain permits and approvals: Manage the application and approval process for necessary permits, including building permits, safety permits, and environmental impact assessments.
• Coordinate inspections: Arrange for required inspections by regulatory authorities throughout the project lifecycle.

11. Post-Construction Evaluation:

• Project handover: Oversee the final stages of the project, ensuring all work is completed according to the contract and that any punch-list items are addressed.
• Ensure client satisfaction: Verify that the client’s requirements and expectations have been met before handing over the completed project.
• Document lessons learned: Conduct a post-project evaluation to identify successes, areas for improvement, and lessons learned for future projects.

Skills and Qualifications:

• Technical Knowledge: A strong understanding of construction methods, materials, and technologies, as well as project management tools.
• Leadership and Communication: Strong leadership skills to manage diverse teams and excellent communication abilities to liaise with stakeholders.
• Problem-Solving: Ability to identify issues early on and come up with effective solutions.
• Project Management Certifications: PMP (Project Management Professional) or equivalent certifications may be advantageous.
• Legal and Regulatory Knowledge: Familiarity with Singapore's building codes, safety regulations, and environmental laws.

A Design Project Manager in Singapore is responsible for overseeing and coordinating design projects from initiation through to completion, ensuring that design processes meet client requirements, timelines, budgets, and quality standards. This role often involves managing teams of designers, architects, engineers, and other specialists while working closely with clients and stakeholders.

Here are the key duties and responsibilities of a Design Project Manager in Singapore:

1. Project Planning and Strategy:

• Define project scope: Collaborate with clients and stakeholders to understand and define the project’s objectives, deliverables, and key performance indicators (KPIs).
• Create project timelines: Develop detailed project plans with timelines, milestones, and deadlines.
• Set budgets: Establish project budgets, including resource allocation for design teams, equipment, and materials.
• Manage scope changes: Handle any changes to the project scope and update project plans and budgets accordingly.

2. Team Leadership and Coordination:

• Lead design teams: Manage and supervise multidisciplinary design teams, including architects, designers, engineers, and other professionals.
• Delegate tasks: Assign responsibilities to team members and ensure that they have the resources and guidance needed to meet project goals.
• Monitor progress: Track the progress of design deliverables to ensure timelines and quality standards are met.

3. Client and Stakeholder Communication:

• Client liaison: Maintain regular communication with clients to understand their needs, gather feedback, and ensure the design aligns with client expectations.
• Present designs: Present design concepts, updates, and progress to clients and stakeholders through meetings, reports, and presentations.
• Manage expectations: Ensure that clients' expectations are properly managed and met, addressing any concerns or issues promptly.

4. Design Oversight:

• Design coordination: Oversee the design development process, ensuring the quality and consistency of the design work across all stages of the project.
• Ensure design feasibility: Ensure that the proposed designs are feasible within the given budget, timeline, and technical constraints.
• Maintain design standards: Ensure that designs adhere to relevant industry standards, codes, and regulations in Singapore.
• Approve design changes: Evaluate and approve design modifications, ensuring that they align with the overall project objectives.

5. Budget and Resource Management:

• Resource allocation: Allocate resources (design staff, tools, software, etc.) efficiently to meet project needs.
• Budget management: Track and manage the design budget, ensuring that resources are utilized efficiently without exceeding financial limits.
• Cost optimization: Identify opportunities for cost-saving without compromising the design quality and functionality.

6. Risk Management:

• Identify risks: Identify potential risks associated with the design phase, including delays, cost overruns, or technical challenges.
• Mitigation plans: Develop and implement risk mitigation strategies to minimize the impact of identified risks.
• Problem resolution: Resolve issues related to design, scheduling, or budgeting that may arise during the project lifecycle.

7. Quality Assurance and Control:

• Monitor design quality: Ensure that design outputs meet the required quality standards, as defined by the client, regulations, and industry best practices.
• Conduct reviews: Organize regular design reviews to assess progress, identify any quality issues, and make necessary adjustments.
• Implement feedback: Incorporate feedback from clients, stakeholders, and the project team to improve the design process and outcomes.

8. Contract and Vendor Management:

• Manage contractors: Work with contractors, vendors, and third-party service providers to ensure design requirements are met.
• Negotiate contracts: Oversee the negotiation and management of contracts with suppliers and vendors involved in the design process.
• Vendor coordination: Ensure that external partners, such as consultants or material suppliers, meet the design specifications and project schedules.

9. Compliance and Legal Requirements:

• Adhere to regulations: Ensure that all design processes and outputs comply with Singapore’s legal, environmental, and building regulations.
• Obtain necessary approvals: Ensure that all design documents, plans, and approvals are in line with regulatory requirements and are submitted to the appropriate authorities.

10. Project Reporting and Documentation:

• Progress reporting: Provide regular progress reports to senior management and clients, including updates on design, timelines, and budgets.
• Documentation: Ensure all design documentation is accurately maintained and archived for future reference.
• Post-project review: Conduct post-project evaluations to assess the design process and identify areas for improvement for future projects.

Skills and Qualifications:

• Design Expertise: Strong knowledge of design principles, architecture, and industry-specific design software (AutoCAD, SketchUp, Adobe Creative Suite, etc.).
• Project Management Skills: Ability to manage multiple projects simultaneously, with experience using project management tools (e.g., Microsoft Project, Trello, Jira).
• Leadership and Teamwork: Ability to lead and inspire design teams, and work collaboratively with stakeholders, clients, and contractors.
• Communication Skills: Strong verbal and written communication skills to present design concepts and ideas effectively.
• Problem-Solving Abilities: Ability to solve complex design and project-related issues efficiently.
• Budget Management: Experience in managing budgets, cost estimating, and financial reporting.

• Reports to Construction Manager
• Ensure the quality of all construction work performed on site are in accordance with the company's QA/QC requirement
• Visit project sites, arrange and conduct QA/QC inspections
• Assist project teams in the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practice
• Ensure that all project quality records and quality audit plans are maintained.
• Prepare inspection & test plans/check list for site activities Review inspection and testing reports
• Propose corrective action and ensure and timely and effectively carried out to rectify
• Oversee delivery inspection of project materials
• Review, approve and maintain QA/QC related documentation and carry out other duties as assigned

Job Requirements:

• Diploma/Degree in Architectural or Civil / Structural Engineering
• At least 6 years of relevant site project experience in QA/QC roles for construction projects
• Familiar with Singapore Codes and Practices
• Experience with CONQUAS
• Experience with Constructability Score
• Experience with Green Mark Certification
• Able to liaise with workers/Clients, Consultant, Main Con colleagues, subcon and suppliers on QA/QC works and protocols at site
• Location : Punggol (Near MRT)
• Project : Sports Centre

Resident Engineer (RE-C&S)

a. Minimum four (4) years of relevant experience as a civil & structural engineer, of which at least 2 years shall be in supervision of works in projects similar in size and complexity; in particular deep excavation and foundation, cut and cover tunnel works and building works;

b. Possess a civil and structural engineering degree recognised by the Professional Engineers Board of Singapore;

c. Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;

d. Lead RTO to monitor, supervise and inspect works as directed by QP(S) and SRE. He must possess good leadership qualities, organisational and inter-personal skills;

e. Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report;

f. Possess strong supervision and leadership skills;

g. Must be willing to work shifts.

h. Working location: West

i. 44hrs work week

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Project Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Perform activities such FAT/SAT and Installation verification for new equipment and modification of existing equipment.
• Review of Vendor Turnover Packages and Construction Trade Turnover Packages.
• Review Functional specifications
• Assist with execution of qualification protocols for IQ, OQ.
• Draft and execute commissioning protocols related to production equipment in upstream/downstream processes
• Support Change Control and deviation management processes
• Coordinates with other departments for efficient completion of projects.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Package Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 3 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Description & Requirements

• Ensuring vehicles are mechanically sound and legally roadworthy
• Performing basic repairs and maintenance in the event of accident or breakdown while in transit
• Safely securing heavy loads and large goods for transport
• Organising the most efficient route from pickup point to drop off point
• Keeping informed of road closures, accidents and traffic diversions
• Organising multiple drop-offs and deliveries in each working day
• Supervising and assisting with the loading and unloading of deliveries into the lorry
• Updating vehicle log books, recording deliveries and tracking mileage

Job Description & Requirements

Construction Company looking for Lorry Crane Operator.

If you meet the criteria, please send in your CV to us.

- Clean traffic records

- Ferry workers

- Collection / Sending of materials or documents

- 6 work days

- Willing to work in Woodlands

- Familiar with Singapore road

- Able to work independently

Job Description & Requirements

• Accountable for the overall implementation and completion of projects within projected time, cost and quality
• Lead and collaborate with all relevant stakeholders to determine the specifications of the project, planning and execution of day-to-day operations on site
• Negotiate contracts with external vendors to reach profitable agreements
• Obtain permits and licenses from appropriate authorities, and ensure that the sites comply with all regulations, e.g.: MOM, NEA, HDB etc.
• Determine needed resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations
• Plan all construction operations and schedule intermediate phases to ensure deadlines will be met
• Acquire equipment and material and monitor stocks to timely handle inadequacies
• Supervise the work of the project team and provide the necessary guidance, or resolve issues and conflicts swiftly
• Evaluate progress and prepare detailed reports for the management in a timely manner
• Ensure adherence to all health and safety standards and report issues
• Leading team of site coordinators, safety personnel and supervisors/workman for daily work progresses
• Management of site coordinators for all official submissions and relevant discussion for work progress with consultants and authorities
• Able to work on all site required documents such as method statements, programmes and other relevant submissions

The Must-haves:

• Bachelor's Degree in Engineering.
• Proficient knowledge in building and construction works with detailed knowledge for building processes
• Proficient in Microsoft Projects/Primavera P6 or other relevant construction software
• Min 3-5 years experience in construction project management
• Good teamwork and communication skills
• Good planning and time management skills
• A dynamic, positive and forward-thinking personality with theability to work under time pressure and remain calm in a fast-paced environment

Key Responsibilities

A Fiber Optic Technician's primary responsibilities include:

• Installing fiber optic systems and ensuring their proper function and alignment.
• Testing and troubleshooting issues with the fiber network and implementing necessary repairs or adjustments.
• Maintaining detailed records of fiber optic infrastructure, anomalies, and corrective actions.
• Conducting regular inspections and performing system upgrades as required to meet evolving technological standards.
• Coordinating with project managers and other engineering staff to streamline network operations.
• Providing training and support to junior technicians and other team members.

Key Tasks and Duties

The day-to-day tasks of a Fiber Optic Technician may include:

• Reading and interpreting maps, blueprints, and diagrams necessary for fiber optic system installations.
• Splicing and terminating fiber optic cables to improve network performance.
• Using a variety of equipment such as power meters and OTDRs (Optical Time Domain Reflectometers) to test the integrity and density of fiber optic cables.
• Ensuring compliance with safety standards and regulatory requirements during all operations.
• Communicating with customers and clients to understand their fiber optic needs and ensuring customer satisfaction with the network solutions provided.

Key Responsibilities:
 Analyze existing operational processes to identify inefficiencies, bottlenecks, and areas for
improvement.
 Develop and implement strategies to optimize processes, reduce waste, and increase overall
efficiency.
 Collaborate with various functional teams to streamline workflows, eliminate redundancies,
and enhance productivity.
 Lead continuous improvement initiatives across various departments.
 Facilitate brainstorming sessions and workshops to identify improvement opportunities.
 Monitor progress, track results, and adjust strategies as needed to achieve operational
excellence goals.
 Collect and analyze data related to key performance indicators (KPIs) to assess operational
performance.
 Use a structured and data-driven approach, collaborate with cross-functional teams to decide
on priorities and implement improvement initiatives.
 Prepare reports and presentations to communicate findings and recommendations to
stakeholders.
 Conduct Lean Six Sigma training to build a working knowledge of the Lean concepts and
DMAIC process.
 Coach candidates for Lean Six Sigma Yellow Belt and Green Belt.
 Provide guidance for root cause analysis to understand underlying issues affecting operational
and system performance.
 Collaborate with the site’s digital team to create and deploy performance dashboards that
track key performance indicators (KPIs) in real-time.

Qualifications:
• Bachelor’s degree in engineering, Science, or a related field. A master’s degree is a plus.
• 3+ years of experience in operational excellence, process improvement, continuous
improvement.
• Strong analytical skills and proficiency in data analysis tools and techniques.

• Certification in Lean, Six Sigma, or other operational excellence methodologies is highly
desirable.
• Excellent communication and interpersonal skills to effectively collaborate with diverse
teams and stakeholders.
• Ability to lead and facilitate workshops, training sessions, and improvement projects.
• Results-oriented mindset with a focus on achieving measurable improvements in operational
efficiency and quality.

The Deputy Contracts Manager reports to the Contracts Manager and assists in all costs and contractual issues in Main Contract as well as Sub-Contracts connected to the project.

A summary of the responsibilities for this position is, and not limited to, as follows:

• Study the tender documents, drawings, specifications, source for suppliers and subcontractors and collate pricing for comparison.
• Prepare tender reports and analyse costings for tender.
• Present the costings to internal stakeholders and put up recommendations.
• Attend tender interviews and answer tender-related queries.
• Establish the Project cost estimation and control procedures
• Control & report Overall Project Construction Costs/Budget
• Project budget forecasting quantity surveying
• Team support to the Project Manager in Contract Management Cost Control.
• Manage contractual matters relating to cost and delays with the client and the subcontractors.
• Review contracts and negotiate commercial terms & conditions.
• Negotiate with consultants and resolve contract issue and dispute management
• Project management involving the supervision of subcontractors, regular site inspections, liaising with clients and consultants to ensure timely completion of the projects.
• Preparation of progress reports, progress charts and interim progress claims.
• Adherence to safety practices in the work place

Requirements

• Degree/Diploma in Quantity Surveying, Building or Civil Engineering
• Minimum 10 years of working experience in tendering, estimating and measurement of quantities.

Job Description

• Assist in reviewing, updating, coordinating and generating all architectural works, shop drawings as and when required
• Assist with coordinating and liaising with all Architectural services with other trades on site
• Provide support and arrange for necessary inspections as and when required
• Assist in the deployment and storage of Architectural materials, plant and equipment at the site
• Contract administration of Architectural subcontracts

Job Requirements

• Degree in Building/Architecture
• Relevant working experience on construction projects
• Strong knowledge of AutoCAD, Revit and Sketchup
• Good technical detailing , specification knowledge and aesthetic sensibilities
• Local building regulation knowledge, submission and tender drawing experience

We are looking for a creative, resourceful Mechanical Design Engineer to join us. The Mechanical Design Engineer is responsible for conceptual / detailed design and will have the opportunity to participate in prototyping, installation, testing and verification of their design. This role requires good technical writing skills to produce documentation for submission to Customers and Clients. The Mechanical Design Engineer will work with a multi-disciplinary team and exposed to interactions with customers, partners, vendors, and sub-contractors.

Job Requirement:

• Master/Bachelor Degree or Diploma in Mechanical/Mechatronic Engineering
• Well-versed with Solidworks and AutoCAD
• Well-versed with Microsoft Word and Excel
• Able to travel overseas when required
• Minimum 2 years of mechanical design or product development experience
• Good technical writing skill
• Basic knowledge of GD&T and manufacturing processes

We are currently seeking a qualified and proactive WSH Safety Officer to oversee and enforce our company’s safety policies. The successful candidate will be instrumental in maintaining a safe work environment and ensuring compliance with national safety regulations.

Key Responsibilities:

• Develop, implement, and improve the health and safety plans, programmes, and procedures in the workplace.
• Ensure compliance with relevant health and safety legislation.
• Identify OHS-related training needs in the company.
• Conduct safety inspections and risk assessments.
• Investigate workplace accidents and compile report findings.
• Recommend solutions to issues that need improvement.
• Oversee installations, maintenance, disposal of substances, etc.
• Active in maintaining ISO Standards

Qualifications:

• Degree or Diploma in Environmental, Health and Safety or other relevant subjects.
• At least 3 to 5 years of experience as a WSH Officer in the process & construction industry.
• Must be a registered WSH Officer with the Ministry of Manpower.
• Familiar with safety documentation and audits.
• Independent and able to work in a team.

Benefits:

• Competitive salary and benefits package.
• Professional development opportunities.
• A supportive and dynamic team environment.

Responsibilities:

• Perform preventive maintenance work and follow-up on all troubleshooting and repair works
• Ensure all preventive and corrective maintenance, including service report from vendors are documented
• Support ad-hoc machine breakdown including fault troubleshooting, diagnosis and replacement of defective components
• Monitor and maintain spare part list
• Supervising contractors for onsite work involving installation, servicing and repair work
• Proper housekeeping of the tools after usage
• Update list of chemical in the storage and ensure SDS is within validity period
• Liaise with overseas and local supplier for equipment and spare part matters
• Involve in internal and external audits when required
• Any other duties as assigned

Requirements:

• Higher Nitec / Diploma in Electrical/Mechanical/Mechatronics Engineering or equivalent
• Experience in supporting maintenance function in manufacturing environment
• Hands on in troubleshooting plant equipment including electrical, mechanical and hydraulic system
• Experience in robotic system maintenance will be an advantage
• Able to work at height with MEWP
• Able to support after office hours and weekend when needed
• Well verse in Microsoft office applications
• Able to read and interpret schematics

Job Requirement

1. Minimum Bachelor degree with at least Six (6) years’ relevant field safety experience in
supervision of installation and maintenance of roadside and Civil and structural coordination with
government/utility agencies and other contractors.
2. Experience as a safety auditor/inspector in ensuring Environmental, Safety and Health practices
are complied with.
3. Strong analytical and problem-solving skills, resourceful and meticulous.
4. Highly motivated and pro-active with the ability to work both independently as well as in a team.
5. Proficient in Microsoft Office (Outlook, Word, Excel, and PowerPoint for Windows.
6. Good verbal communication and writing skills in English.
7. Be expected to travel regularly between office and sites.
8. Prepared to work on site and perform night work based on project needs.

Job Description

1. Oversee the works on equipment structures, installations, deployments, facilities, and
equipment being deployed at sites.
2. Plan and work out the resource provision requirements, work, schedule, and Standard
Operating Procedures (SOP) for works at sites.
3. Review planned work schedule and method statements prior to commencement of site work
activities.
4. Ensure that works are carried out accordingly to design, meeting the safety, health,
environmental and comfort requirement for stakeholders.
5. Identify defects and damages at the site infrastructures, including equipment and facilities,
as well as theft, accidents, and incidents.
6. Carry out safety training to instil safety awareness. Ensure safety rules and regulations at
sites are adhered to by all site personnel.
7. Be part of Safety Committee and ensure compliance to safety, health and environmental
requirements including Authority Code of Practices (COP) and WSH, MOH & MOM
Guidelines.
8. Resolve any unexpected problems or difficulties that may arise at sites.
10. Prepare regular reports to update site progress, resource utilisation, requirements, past and
on-going activities, etc.

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Key Roles and Responsibilities

• Perform front end engineering design (FEED) and basic design for Electrical system of renewable energy projects, e.g. Solar (Roof top, ground mounted and floating), Battery Energy Storage (BESS) projects, Wind projects and mix of Solar, BESS, Wind projects including configuration study.
• Provide technical expertise to develop electrical engineering design deliverables (e.g. SLDs, Layouts, equipment list, load list, datasheets, specifications, electrical protection systems and sizing calculation etc.) for Solar, BESS, Wind, and other projects for Electrical system.
• Review inter-disciplines design/ engineering with consideration for safety, interfacing, quality, performance, reliability, flexibility of operation with optimal project and life cycle cost.
• Support Project-In-charge for over-seeing contractors / vendors for on-site electrical works and accountable for updated and accurate records of all electrical systems
• Conduct engineering activities during business or project development including but not limited to pre-feasibility/ feasibility studies, technical due diligence, electrical layouts, electrical schematics, protection coordination, review of power system studies (short circuit, load flow, earthing, stability etc.)
• Preparation of technical proposal to customer, project / EPC scoping strategy, vendor selection (bid review, technical clarification and bid evaluation), carried out cost estimation, determine LCOE, and all related technical support a etc.
• Stay up to date with advancements in Electrical, Solar, BESS, Wind power technology, Evaluation of new technology and innovative solutions e.g. competitive alternatives to SF6 insulated GIS, etc.
• Participate in engineering activities during project execution including but not limited to preparation of Scope of Work / Design Memorandum / Minimum Functional Specification, tender review on technical proposals and clarifications, attend site queries and site installation issues that related to design, pre-commissioning, testing and commissioning, PSSR etc.
• Attend FAT/SAT and Functional testing to ensure electrical equipment is meeting the design intent & project premise.
• Participate in HAZOP, QRA, EIA, SPD studies. Liaise with LEW for system studies and other regulatory requirements.
• Review and approval of detailed design documents submitted by Contractors and ensure compliance with Engineering Standards, company & industry best practices.
• Establish system and documentation for company engineering standards & specification, ITP, approved vendor/manufacturer list, material specifications, discipline’s schedule of rates and cost estimate template, engineering checklists etc.
• Ensure all activities carried out are in full compliance to all regulatory and authority requirement of Singapore and other SEA countries (Philippines, Malaysia, Vietnam etc.) i.e. Energy Market Authority Act, Electricity Act and local Code of Practices during execution of Engineering Design.

Qualifications & Experience

• Bachelor’s degree in electrical engineering
• At least 8-15 years of experience in Solar and BESS Electrical design, energy business related engineering management and project management (engineering and construction).
• Well verse of Solar resource assessment, PVsyst software, BESS sizing techniques, software and tools (Homer etc.).
• Experience in other renewable energy projects, especially Wind, CCU is preferred.
• Knowledge of Power system studies software (ETAP etc) is desirable.
• Have a passion and experience in areas related to energy transition and infrastructure

Skills/competencies & Preferred Characteristics

• Demonstrate critical thinking, positive attitude, teamwork, analytical, communication and leadership skills.
• Strong self-motivation and work ethic, flexible and thrives under pressure.
• Excellent project management and organizational skills.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

* Familiar with evaluation of tender & quotation,preparation of tender & quotation

* Responsible for taking off measurement from site & progress claim

* Carry out Quantity take-off for tendering of project

* Ability to source for supplies and sub-contractors for quotation for tendering

* Evaluation and certificate of sub-contractors' progress payments

* Project administration and documentation include preparation of interim

* Review and advise the Project team on the cost impact for variation of project specification

* Site co-ordination and drawing verification where needed

* Monitor projects through completion, providing correction, modification or assistance to other

* Perform other duties as assigned

Requirements :

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Quantity Survey or equivalent.
• At least 3Year(s) of working experience in the related field is required for this position.

• Assist WSHO in promotional activities, audit, meetings and execution of safety program
• Assist WSHO to establish, update, maintain and implement the safety management system onsite
• Identify potential hazards and unsafe work practices
• Create standards to reduce accidents and injuries
• Arrange daily work for safety workers and supervise a team of safety personnel

Requirements

• Advance certificate in WSH

• Actively conduct risk assessments at project site and recommend measures
• Monitoring and verifying that the Environmental Management Plan is always adhered
• Keeping records of all activities/incidents concerning the environment on site
• Work closely with different teams to implement and maintain a strong safety regime .
• Conduct toolbox meeting and ensure the permit to work system in place.
• Reporting to the WSH Manager, you will liaise closely with Project Managers on workplace safety, health and environmental issues to maintain a high level of safety at the sites.
• Ability to lead and advise on safety programs.
• Review and maintain site's WSH records.
• Other duties as assigned by management.

Job Requirements

• Degree in Safety, Health and Environment Management or other relevant subjects
• Registered as Workplace Safety & Health Officer and Environmental Control Officer with at least 3 years of post-registration and practical experience.