JOB DESCRIPTION

1. Perform concept design studies, sketch plans, and criteria/facilities programs for projects as required

2. Perform technical review of drawings and required design submission on assigned projects, and to ensure conformance with company design standards

3. Participate inter-department coordination on all project related issues

4. Provide design guidance to client and their consultants, as well as internal design and construction staff to adapt company design standards

5. Conduct site visits.

6. Maintain and update project review templates and quality control checklists

7. Provide recommendation for design changes to address customer satisfaction, operational concerns, company standard, and development strategies

8. Assist and to maintain and develop company standard documents and work flow

9. Maintain on policy, methods, and systems support matters

10. Any other relevant tasks as assigned by Project Manager

JOB QUALIFICATION

1. Minimum Bachelor Degree in related / Engineering profession

2. A minimum of 5 years of progressive experience in semicon-related project.

3. Good design skills, technical and communication skills.

4. Be confident, assertive and independent

5. Possesses intermediate knowledge of applicable codes, and implications on design

6. Advanced ability to work in team environment and supervise others

7. Ability to plan and manage design team efforts to effectively meet deadlines

8. Good interpersonal skill and attention to detail

9. Ability to work well in high volume, fast-paced environment as a member of a collaborative team

10. Proficient in electronic mark-up software, MS Office, MS Project, Sketchup, AutoCAD, BIM and other relevant 3d softwares.

Our client is from Construction Industry. They are looking for a WSH Officer to assist their Engineer team for the next phrase of their business. They are located Islandwide of Singapore– easily accessible. The WSH Officer is responsible for:

Duties

• Effectively lead the safety team and ensure the implementation of Workplace Safety & Health (WSH) Management Systems to minimize risks and accidents.
• Review and update all risk assessments to maintain compliance with WSH regulations and legal standards.
• Investigate on-site incidents and implement corrective measures to prevent recurrence.
• Ensure adherence to WSH Act provisions, enforce safety measures, and conduct regular inspections to ensure compliance among staff and subcontractors.
• Ensure the effectiveness of fire protection systems and emergency response management for the office and factory.
• Promote a strong safety culture through training, awareness campaigns, and employee engagement activities like drills and competitions.
• Liaise with statutory bodies, keep up to date on WSH regulations, and ensure compliance with waste management and licensing requirements.

Requirements

• Registered as WSHO with MOM
• Min 3 years of experience performing as a WSHO
• Relevant Qualification in Workplace, Safety and Health / Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

• Salary: $3,200-$4,000
• Mon to Friday 8am to 5pm
• Location: Penjuru Lane (Transport provided @Jurong east)

Roles & Responsibilities

• Prepare correspondence emails, letters, statements, documents, and reports
• Draft company's policies, regulations, rules, and supervise the implementation.
• Manage filing and document control for company policies, regulations, SOPs, contracts & agreements, reports, and other administrative documents.
• Possess legal knowledge and liaise with lawyers when required.
• Fully in charges the administration department and manage administrative issues for the company.
• Process administrative work related to government authorities, associations, the company’s head office, customers, and visitors.
• Handle administrative and logistical arrangements for customers and visitors.
• Organize events by coordinating with relevant departments for planning and implementation.
• Collect training requirements from relevant departments, prepare the company training plan, and supervise its implementation.
• Collect and arrange daily and weekly activities for company management.
• Manage vehicles and drivers for the company.
• Provide backup support for colleagues in IT and HR positions.
• Undertake any other ad-hoc tasks and duties as assigned by superiors.

Job Requirements

• Min 2 years of working experience in administration

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Salary: $3800

Duration: 6 months contract

Working Days & Hours: Mon to Fri office hours

Location: Joo Koon

Job Description:

- Assist engineer in sample preparation

- Data collection

Job Requirements: Min GCE A LEVEL / DIPLOMA/Degree in Engineering

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

1. Responsible for the management and handling of the company's legal affairs, including contract drafting or review, legal document drafting, dispute resolution, intellectual property management, compliance review of company rules and regulations, etc., to ensure the compliance of the company's business and control of legal risks

2. Track and study the changes and updates in relevant laws and regulations, conduct risk assessments in a timely manner, and develop corresponding response strategies

3. Assist the company in resolving legal disputes and controversies, and safeguard the interests of the company,

4. Answer legal questions during the company's operation process and provide legal advice and assistance to other departments

5. Establish and maintain good cooperative relationships with government departments and law firms, and obtain necessary legal support and consulting services.

Job Requirement:

1. Bachelor's Degree in Law/Legal Studies/Construction law or related in relevant industry

2. With work experience of over 2 years from law firm or corporate that deals with legal matter.

3. A team player with the willingness to be involved beyond the formal job remit

4. Able to converse in both English & preferably Mandarin as required to liaise with Mandarin speaking clients

5. Strong written and oral communication skills, good at communication, proactive management and team spirit.

6. Singaporean or Singapore PR preferred

• Up to date knowledge of market price trends.
• Ability to administrate on ACMV / tender and tendering procedures.
• Good strategies, planning and control of all tendering activities.
• List the scope of work and commercial requirements in order to determine the risks of the projects.
• Prepare and follow up on the Request For Quotations to suppliers / sub-cons in order to ensure tender costing and technical data to be submitted on time.
• Take off Bill of Quantities from the ACMV Drawings, Points of Schedules and Architectural drawings.
• Collate price comparison, costing summary and technical proposal in order to prepare tender submission.
• Study the addendum and / or corrigendum documents and update costing summary with technical proposal accordingly.
• Maintain relevant documentation in an orderly and proper manner.
• Attend site briefing / site meeting / post tender interview when necessary.

Responsibilities:

• Coordinate C&S designs and ensure compliance with project specifications and local regulations.
• Collaborate with architects, engineers, and contractors to ensure alignment between C&S designs and other disciplines.
• Review and provide input on civil and structural design drawings and documentation.
• Resolve design issues during construction and provide technical support to the site team.
• Ensure the integration of C&S designs with the architectural and M&E (mechanical & electrical) systems.
• Conduct design coordination meetings with consultants and project stakeholders.
• Monitor design progress to ensure timely delivery of drawings and documents for construction stages.
• Ensure quality control and adherence to safety standards in civil and structural design implementations.
• Prepare reports and updates on C&S design progress for project management.

Requirements:

• Bachelor’s degree in Civil Engineering, Structural Engineering, or a related field.
• Over 5 years of experience in civil and structural design coordination, preferably on large-scale construction projects.
• Experience in working with multidisciplinary teams and coordinating between design and construction teams.

Job Responsibilities:

• Establish BIM implementation strategy, requirements, process, workflow and needs for construction projects.
• Optimise design and downstream construction processes through the implementation of BIM and VDC concepts beyond 3-D modelling and conflict resolution.
• Plan, manage and maintain the 3-D BIM data and complexity of content to meet project deliverable requirements.
• Embrace a holistic approach and strategically plan for BIM execution in green building projects.
• Manage all drawings (e.g. Shop drawings, Layout Plans drawings and As-Built drawings) with all respective trades (e.g. Architectural, Structural, MEP and Specialist Sub-contractors works), as well as to resolve all design issues and de-conflict clashes in BIM drawings.
• Lead and support the projects’ BIM Team(s) including managing of sub-contractors’ BIM Team(s).
• Attend and chair design technical meetings with Clients, Consultants and Sub-contractors.
• Engage project teams to innovate and leverage advanced tools to solve project problems.
• Assist the QS department in variation order claims related to design changes.
• Develop a training program for design managers and engineers to improve the use of BIM authoring tools.
• Any other duties that may be assigned.

Requirements:

• Degree / Master in Architecture / Engineering / Construction or relevant field.
• Minimum 10 years of local working experience in the related field with at least 6 years of hands-on experience in handling BIM projects.
• Trained and proficient in AutoCAD, Revit / BIM software in Architectural / Structural / MEP and other visualization and simulation applications.
• Experience in implementing the BIM adoption of design authoring and collaboration technology tools in construction projects.
• Good understanding of the Singapore Construction Industry regulations (e.g. Building code, BCA, URA and LTA).
• Experience in leading a BIM Team in Shop drawing production, coordination and document control.
• A positive team leader with good judgment, prompt decision-making abilities and ability to meet tight deadlines.
• Solid organizational skills including attention to detail and multi-tasking skills.
• Excellent written and verbal communication skills.
• Candidate with knowledge in Specialist trade works (e.g. Curtainwall, Stone and Interior Design works) will be an added advantage.

Roles and responsibilities:

• Degree or Diploma in Mechanical/Electrical Engineering.
• Minimum 6 Years of Local Experience with Main Contractor in both commerical and institutionl building Projects.
• Able to communiate with consultants and contractors on technical matters
• knowledge in local codes of practice
• Well experinced in making shop drawings.
• Experience in managing A& A projects independently
• Making Electrical plans and drawings.
• Overseeing Electrical Installation
• Troubleshooting Electrical Issues.
• Ensuring Electrical Safety
• Commissioning Electrical Systems
• Budgeting, Estimation, and Purchase of Electrical Components
• Testing and Installation of Systems
• General Electrical Maintenance
• Working on High-Voltage Lines and Equipment
• Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.
• Work closely with site foreman on project progress and ensure timely work arrangements.
• Attend weekly or monthly meeting on work progression and prepare monthly meeting progress report.
• Understand AutoCAD and CAD measurement
• Able to read and understand engineering drawings and specifications.

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections.
• Conduct regular inspections to ensure works are in compliance with method statements (in accordance to BCA’s Good Industry Practice)
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• Prepare relevant QA/QC reports
• Implement QA/QC plans and ensure PPVC quality before delivery
• Ensure the functionality of the product before handing over to buyers
• Assist in preparing for QM submissions
• Assist in yearly ISO audits
• Assess, feedback on the construction process and procedures
• Execute quality control as per site specific materials and Works Quality Plan.
• Conduct relevant training for sub-con and internal staff.
• Issuance and handling of Site Memo.
• Monitor undertaken corrective and preventive actions against non-conformities.
• Arrange and liaise with BCA for CONQUAS/QM assessments.
• Recommends solutions for critical and/or frequent recurring defects to Project Team.
• Ensure all the method statement used has obtained approval from the clients and consultants.
• Follow-up all the required tests as per contract requirement.
• Attend regular site meetings – QAQC, Landscape Coordination Meeting and Client Meeting.
• Attend off-site inspection – Precast and Structural Steel Works (Malaysia and Singapore Factory)
• Follow the developer’s Quality Inspectors (QI) and Customer Service Officers (CSO) for inspection prior to unit handover to owners.
• Attend to unit owner’s defects during Defect Liability Period.
• In-charge of the handover of the common areas to management team.

Job Requirements:

• Candidate must possess at least a degree related to QA/QC knowledge
• Prior experience related to construction industry (Condominium projects etc.)
• Good knowledge of construction quality control/assurance

Responsibilities:

• To manage and coordinate production of Quality BIM Models and construction documents with minimal supervision
• Manage and deliver a fully coordinated federated model in agreed formats
• Assists BIM Manager in the implementation of BIM
• Assist BIM Manager to update and revise BIM Models throughout the project life cycle
• Ensure BIM Models are modelled with correct BIM parameters and attributes for BIM base quantification and 4D simulation
• Collaborate with team and other relevant departments to ensure all drawings are in order as per design requirements
• Coordinate with Consultants, SWCs & sub-contractor
• Use of BIM for coordination, sequencing, constructability and as-built
• Review design and fabrication models and drawings
• Perform clash checks
• Perform QC before release and exchange of BIM Models

Requirements:

• Diploma or equivalent in C&S/ Architectural/ M&E/ Building services
• At least 1 years of working experience in the related field is required
• Formally trained in BIM or equivalent modelling training certification
• Proficient in BIM/ Revit (Architectural/ Structural and Reinforcement/ MEP modelling and Navisworks
• BIM Coordination experience using Autodesk/ Bentley software

If you are not invited for an interview within 4 weeks, we regret that your application was not suited to this vacancy.

For more company information, please feel free to visit: http://www.stecs.com.sg/

Personal data collected will be used for recruitment related purposes only and will be destroyed after 12 months.

Responsible:

• Fetch workers from/to dormitory to jobsite (13 seater van/ MVP car/ mini van)
• Ensure that all deliveries have been signed and delivered to the correct recipient
• Help in running office errands
• Responsible for proper daily vehicle maintenance check and upkeep of the vehicle
• Housekeeping and cleanliness of the vehicle
• Send vehicle for routine servicing maintenance, VICOM/STA inspection, and repair work when required
• Assist with ad hoc assignments

Requirements:

• Possess a valid Class 4 driving license
• Valid bus vocational license for shutter bus/mini van
• At least 2 Year(s) of working experience in this position, preferably in construction.
• Able to start work immediately or with short period
• Able to drive to Malaysia (Johor)
• Mutli opening available
• Knowledge of traffic laws

If you are not invited for an interview within 4 weeks, we regret that your application was not suited to this vacancy.

Personal data collected will be used for recruitment related purposes only and will be destroyed after 12 months.

Responsibilities

• Able to perform electrical installation work such as cable laying, modification of electrical circuit & lighting
• Able to carry out all responsibilities of a site supervisor
• Able to attend weekly or monthly meetings with the client
• Able to attend non-schedule or emergency call-up
• To supervise general workers & look after equipment at the site
• To ensure the smooth progress of site works
• To ensure safety & housekeeping standards are maintained
• To ensure all work done meets quality
• All issues concern on-site works

Requirements

• Independent worker
• Responsible & trustworthy
• Good communication & interpersonal skills
• Able to work under pressure
• Strong knowledge of health, safety & environmental regulations

SOW:

• Able to repair vehicle mechanical problems.
• Able to diagnose complicated computer fault codes on heavy vehicles.
• Able to do vehicle servicing.
• Able to communicate in English.
• Able to obey safety standards.
• Have technical writing skills.
• Ability to communicate technical knowledge in a clear and understandable manner.

Location:

• Tuas.
• 5.5 days work week.

Expectations:

• Have a degree in mechanical engineering.
• Proven working experience at least 3 years in mechanical engineering.
• Keen to learn.
• Respectful.

Interisland Technology and Engineering Pte Ltd is looking for a proactive and results-driven Operations Manager to oversee and streamline our operational activities. The ideal candidate will be responsible for managing day-to-day operations, optimizing processes, ensuring the efficient delivery of projects, and improving overall performance across various departments. This leadership role requires a strategic thinker who can drive operational excellence while maintaining high standards of quality, safety, and customer satisfaction.

Key Responsibilities:

• Oversee and manage the daily operations of the company, ensuring efficient and effective processes across all departments.
• Develop and implement operational strategies, policies, and procedures to support business goals.
• Coordinate with project teams, engineers, and other stakeholders to ensure that projects are delivered on time, within scope, and within budget.
• · Optimize resource allocation, including manpower, equipment, and materials, to ensure operational efficiency.
• Identify opportunities for process improvements and implement changes to drive productivity and reduce costs.
• Ensure compliance with company policies, industry regulations, and safety standards.
• Monitor key performance indicators (KPIs) and prepare regular reports on operational performance for senior management.
• Lead and manage a team of supervisors and department heads, providing guidance, training, and support to achieve company objectives.
• Manage supplier and vendor relationships, ensuring quality, cost-effectiveness, and timely delivery of goods and services.
• · Resolve operational issues, troubleshoot problems, and ensure minimal disruption to project timelines.
• Support the HR team in workforce planning, recruitment, and performance management within operational teams.
• Foster a culture of continuous improvement, collaboration, and high-performance within the operations team.

Requirements:

• Degree in Business Administration, Operations Management, Engineering, or a related field.
• Minimum 5 years of experience in operations management, preferably in construction, marine, or process industries.
• Proven track record of managing complex projects and operational processes.
• Strong leadership and team management skills, with the ability to motivate and develop staff.
• Excellent problem-solving, decision-making, and analytical abilities.
• In-depth knowledge of operational best practices and regulatory requirements.
• Strong communication and interpersonal skills, with the ability to interact with all levels of management and external stakeholders.
• Proficiency in project management software, Microsoft Office Suite, and other relevant tools.
• Ability to manage multiple tasks and priorities in a fast-paced environment.

Join Interisland Technology and Engineering Pte Ltd as an Operations Manager and play a key role in driving operational efficiency and excellence across the company. This is a high-impact position with opportunities to contribute to the company’s growth and success.

Job Description:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering

Job Description:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering

Senior Project/Site Engineer is responsible for assisting the Project Manager on the progress of the projects/site works and manpower related aspects of the project. They are to oversee drawing management and make sure the updated drawings to the clients and subcontractor are issued.

Job Responsibilities:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors / foreman for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues
• Assist in preparation of method statement and construction sequence for project implementation
• Assist project manager in Project Costing, monthly progress claims and monthly progress report
• Support Quantity Surveyor (QS) in verifying progress payments and claims
• Coordinating the handing-over of completed works to the client and completion of the necessary rectification works

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering
• Minimum 3-6 years of relevant working experience

1. Responsible for daily admin work, including fixed assets management, vehicle and dormitory rental and management.

2. Responsible for hotel and air ticket booking

3. Responsible for the management of workers and work permits

4. Assist in the reception and logistics support of the conference and various activities

5. Other work assigned by superiors, etc.

Job Requirements:

• Minimum GCE 'A' level
• At least 2 years of administrative work experience, proficient in using various office software, and possessing certain data analysis skills
• Familiar with administrative affairs, housing and vehicle rental, hotel and flight booking, etc;
• Good communication skills, with Mandarin as second language to liaise with our Chinese counterparts, subcons, suppliers, etc.
• Have strong interpersonal communication and coordination skills, sense of responsibility and team spirit, and high executive ability.
• Singaporean or Singapore PR preferred

Roles & Responsibilities:

Cost Estimation and Budgeting:

• Prepare detailed cost estimates for mechanical and electrical works at various project stages, including feasibility, design, and construction.
• Develop and manage project budgets, ensuring accurate forecasting and monitoring of costs.

Tendering and Procurement:

• Prepare tender documents, including bill of quantities, specifications, and scope of work for M&E contracts.
• Evaluate tenders, conduct negotiations with contractors, and make recommendations for contract awards.

Contract Management:

• Review and analyze contracts to ensure compliance with terms and conditions, and manage any variations or claims.
• Prepare and submit progress claims, final accounts, and related documentation to clients and contractors.

Cost Control and Reporting:

• Monitor project expenditures and performance against budgets, identifying any deviations and implementing corrective actions.
• Provide regular cost reports and financial forecasts to project management and stakeholders.

Site Visits and Assessments:

• Conduct site visits to assess progress, quality of work, and compliance with design specifications.
• Liaise with project teams to resolve any discrepancies or issues related to M&E works.

Requirements:

• Bachelor’s degree in Quantity Surveying, Construction Management, Civil Engineering, Mechanical Engineering, or Electrical Engineering.
• 3–5 years of experience as a Quantity Surveyor, with a focus on mechanical and electrical projects in the construction industry.
• Proven track record of managing costs and contracts effectively in complex construction environments.
• Experience in preparing cost estimates and managing project budgets for M&E systems.

Job Objective

Supervision of Installation:

• Oversee the installation of mechanical and electrical systems, ensuring compliance with design specifications and safety standards.
• Monitor the work of contractors and subcontractors to ensure quality and adherence to project schedules.

Site Coordination:

• Coordinate with project managers, engineers, and other supervisors to facilitate effective communication and workflow on-site.
• Conduct regular site inspections to assess progress, quality, and safety of M&E installations.

Quality Control:

• Implement and enforce quality control measures to ensure the reliability and functionality of M&E systems.
• Review and approve M&E work completion, ensuring all installations meet regulatory standards and project requirements.

Problem Solving:

• Identify and troubleshoot any issues related to M&E systems during installation and commissioning.
• Provide technical guidance and support to team members and contractors as needed.

Documentation and Reporting:

• Maintain accurate records of installation activities, inspections, and testing results.
• Prepare progress reports and updates for project management and stakeholders.

Job Requirement

• Diploma or Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or a related technical field.
• 3–5 years of experience in M&E supervision within the construction industry.
• Proven track record in managing M&E installations for large-scale construction projects.
• Experience in coordinating with multidisciplinary teams and managing on-site operations.

Job Description & Requirements

We are looking for a full-time, detail-oriented Site Supervisor to oversee all our construction projects. You will be monitoring on-site day-to-day activities and reporting the progress status to the Site Coordinator. Besides, you will be keeping a watchful eye on the Contractors as well as Construction Workers.

You will be conducting regular inspections and implementing site safety practices to avoid any hazards and accidents. Apart from supervising, you should track inventory supplies and order building materials as and when needed.

Job Description

• To assist the Engineer in the daily execution of work.

• To supervise the work of sub-contractors and in-house workers.

• Ensuring project completion as per the set timeline.

• Ensure installation is carried out as per construction drawings.

• To monitor the progress and quality of work being performed by workers.

• Ensure that works are executed within an acceptable standard of workmanship.

• Attend the daily tool-box meeting and convey clear instructions to the workers.

• Understand and ensure compliance in project requirement and scope of work.

• Regularly checking inventory and placing orders for building materials

• Ensuring all equipment are in working order and good condition

• Ensuring the workers follow site safety procedures

• Attending any on-site meetings.

Requirements

• At least 5 Year(s) of working experience in the related field is required for this position.

• Possessing of SCWSH (BCSS) is mandatory.

• Highly proactive attitude, self-motivated, team player, strong problem-solving and communication skills.

• Good written and spoken English.

• Ability to work for long hours

• Strong leadership quality

• Able to manage multiple job sites at the same time

*Remuneration is based on work experience.

*Working hours : Monday to Friday 8am to 5:45pm

Sat 8am to 1pm

*Salary : $$3,000.00 to $6,000.00

Responsibilities:

• Understanding project specifications and developing time schedules and budgets that meet them.
• Negotiating with vendors and contractors to secure the best prices.
• Observing existing processes, analyzing staff performance, and addressing deficiencies accordingly.
• Monitoring and tracking project progress, and writing up reports.
• Attending and scheduling meetings as required.
• Delegating tasks and ensuring workers receive feedback.
• Understanding and meeting all contract requirements.
• Communicating with managers, supervisors, and the rest of the team.
• Analyzing technical drawings and providing material and cost estimates.
• Ensuring all projects are completed on time and within budget.

Requirements:

• Degree in Engineering or similar.
• Primavera P6 and BIM software (Eg. Revit, Visualization and Animation software)
• Experience with 3D modeling software.
• Proficiency in MS Office.
• Planning and project management skills.
• Strong analytical, critical, and logical thinking skills.
• Ability to focus under pressure and meet deadlines.

Roles and responsibilities:

• Degree or Diploma in Mechanical/Electrical Engineering.
• Minimum 5 Years of Local Experience with Main Contractor in both commerical and institutionl building Projects.
• Able to communiate with consultants and contractors on technical matters
• knowledge in local codes of practice
• Well experinced in making shop drawings.
• Experience in managing A& A projects independently
• Making Electrical plans and drawings.
• Overseeing Electrical Installation
• Troubleshooting Electrical Issues.
• Ensuring Electrical Safety
• Commissioning Electrical Systems
• Budgeting, Estimation, and Purchase of Electrical Components
• Testing and Installation of Systems
• General Electrical Maintenance
• Working on High-Voltage Lines and Equipment
• Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.
• Work closely with site foreman on project progress and ensure timely work arrangements.
• Attend weekly or monthly meeting on work progression and prepare monthly meeting progress report.
• Understand AutoCAD and CAD measurement
• Able to read and understand engineering drawings and specifications.

Job Responsibilities

• Supervise on-site architectural work to ensure compliance with design specifications and standards.
• Coordinate with architects, engineers, and contractors to address design-related issues.
• Review architectural drawings, detailing, and specifications, ensuring proper implementation.
• Conduct regular site inspections to ensure quality control and resolve any discrepancies.
• Monitor the progress of architectural work to ensure timely completion of milestones.
• Ensure that materials used conform to approved specifications and drawings.
• Assist in resolving any technical or design issues that arise during construction.
• Ensure compliance with building codes, safety regulations, and industry standards.
• Prepare progress reports and provide updates to project management and stakeholders.

Job Requirements:

• Diploma or Bachelor’s degree in Architecture, Civil Engineering, or related field.
• 3–5 years of experience in supervising architectural works on construction sites.
• Hands-on experience in coordinating with architects, contractors, and site teams for the execution of architectural designs.