Responsibilities

· To only carry out any lifting operation when a lifting supervisor is present or has approved the carrying out of such operation.

· To only engage in acts or manoeuvres per the standard practice or company’s SOP.

· To ascertain whether the ground conditions, on which a mobile crane is to be operated, are safe for travel and suitable for any lifting operation.

· To only use the crane for operations for which it is intended.

· To only manoeuvre or hold suspended loads over public roads or areas after that road or area has been cordoned off.

· To ensure that any outrigger, when it is required, is fully extended and secured.

· Before the start of every work shift, perform operational tests on all limit switches under no load conditions before any lifting operation is carried out and enter the results of such tests in a form or checklist specified by the management.

· To report any failure or malfunction of the crane to the lifting supervisor.

· To ensure that any stationary truck-mounted or wheel-mounted crane is adequately and securely blocked on a slope.

· To only hoist objects for which the weight has been ascertained.

· To only hoist loads if the path of the manoeuvre is clear and to report obstructions, if any, to the lifting supervisor.

· To only hoist loads when a certified signalman has received a clear signal.

· Attend daily toolbox meetings with supervisors and workers for effective consultation, communication and coordination before the commencement of work.

· Perform any other tasks as may be assigned by the supervisor.

· Ensure compliance with relevant government regulations and the company’s quality, safety, health and environmental (QSHE) policies, practices and procedures.

Requirements

· Minimum 5 years of working experience in a similar capacity in marine or related industry.

· Knowledge and understanding of construction safety rules and procedures.

· Valid crane operator license.

· Physically fit due to the requirement to climb in and out of the crane cabin and to see and hear lifting supervisors, signalmen, HSE personnel etc.

· Good communication skills.

· A team player with the ability to work independently as well as in a team.

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Supervise and ensure that mechanical work activities are performed in a safe and timely manner while adhering to specifications and codes
• Responsible for organising mechanical works, delegating tasks and managing workers on site
• Assist the Mechanical Engineers in planning and monitoring of construction work progress.
• Any other duties to be assigned from time to time

Prerequisites:

• Minimum 3 years' relevant work experience in construction industry
• Knowledge of static and rotating equipment and/or Steam or Gas Turbines
• Ability to manage and handle workers
• Possess a strong commitment to workplace safety

Job Description

• Prepare, manage, and facilitate design drawings utilizing BIM, Rino, Grasshopper and CAD technologies.
• Ensure all models are compatible and that BIM data is accessible to all project participants.
• Oversee coordination between architectural and structural interfaces, collaborating with main contractors and other trades for effective cross-team support.
• Work closely with the design team and other relevant departments to ensure all drawings meet design specifications.
• Manage design changes and revisions, addressing any discrepancies and queries between design and project teams.
• Attend site meetings as required and perform additional tasks as needed.

Requirements

• Degree in Architecture, Civil Structural Engineering, or a related field.
• Minimum of 4 to 5 years of relevant experience in construction and architectural projects.
• Proficiency in Revit, Navisworks, Rino, Grasshopper, AutoCAD, and MS Office.
• Knowledge of DGN, DWF, IFC, and MicroStation is a plus.
• Strong project management and decision-making skills.
• Ability to work effectively as part of a team as well as independently with minimal supervision.

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

Reporting to the Company Security Manager, the Security Executive will ensure Industrial Security compliance for the Business Unit in the areas of Physical, Information, Personnel and Document Security according to policies and SOPs.

Responsibilities:

• Build security awareness and culture through conduct of regular and scheduled briefing, training and broadcast reminders
• Ensure security compliance in accordance with security SOPs and policies
• Assist in the conducting scheduled internal audits and no-notice spot-checks
• Support any tasks as assigned by management

Requirements:

• ​​​​​​​Experience in introducing and implementing new security initiatives or enhancing existing security measures
• Knowledge in IT and network security would be an added advantage

Key Responsibilities:

• Design and develop electrical systems, components, and wiring diagrams.
• Design and oversee the electronics hardware design activities of the whole product.
• Select electrical/electronics components for new product development, and replacement for existing products as well.
• Conduct electrical testing and troubleshoot systems to ensure functionality.
• Collaborate with cross-functional teams (e.g., mechanical) on product development.
• Liaise with supplier and operation for design improvement.
• Provide technical support of products introduced into both the domestic and international markets.
• Work closely with a multidisciplinary team to drive cost optimization, manufacturability, quality and reliability.
• Provide technical support during installation, commissioning, and maintenance of systems.

Requirements:

• Bachelor’s degree in electrical engineering or related field.
• Proficient in electrical design software tools
• Strong knowledge of electrical systems, power distribution, control systems, and circuit design.
• Strong problem-solving skills and attention to detail.
• Hands-on experience with hardware testing, troubleshooting, and equipment commissioning.
• Experience in microcontroller platform hardware design is a plus
• Knowledge of HVAC systems is a plus.

Responsibilities

• Research and develop air conditioning system/product for industrial and commercial use
• Design and optimization of mechanical components/system for HVAC systems
• Analysis of mechanical systems, including structural, fatigue, thermal and vibration
• Develop manufacturing drawings in accordance with applicable standards
• Engineering product design, optimization, cost down and scale-up for mass production
• Product certification, quality control and design for manufacturing and ease of maintenance
• Collaborate and interact with external vendors for component selection, manufacturing and system assembly
• Read, interpret and review technical drawings, schematics, and computer-generated reports
• Generate operating procedures and provide technical information
• Collaborate and analyze customer design proposals, specifications and requirement, and to evaluate and propose solutions

Requirements

• Bachelor's Degree in mechanical Engineering or equivalent engineering degrees
• Good mechanical aptitude and knowledge
• Proficient in SolidWorks and modeling
• Excellent problem solving and project management skills
• Background in HVAC engineering especially chiller operation and optimisation is a plus
• Experience in R&D and product development especially in air conditioning system is a plus
• Knowledge in new product introduction from R&D to commercial stage
• Technically sound coupled with experience in sourcing, negotiation and cost control
• Possess initiatives, logical thinking and good analytical abilities, and able to resolve issues from multiple perspectives.
• Passion for the job and a challenging spirit preferred.
• Strong communications and interpersonal skills

The person will be responsible for

1) Prepare & compile Monthly Progress Claim for all the projects;

2) Prepare & submit Variation Order for all projects where applicable;

3) Quantity Take-off;

4) Assist in monitoring & compilation of all ISO 9001, ISO14001 & ISO45001 documentation for Audit & BCA Accreditation;

5) Any others relevant task that maybe assign from time to time

Qualifications : Diploma in related field;

Experience : Fresh or 2 years relevant experience will be added advantage;

• Engage in the installation, repair and maintenance of various technology-based equipment.
• Conduct regular checks and troubleshooting to ensure the technical equipment operates at its optimal performance.
• Provide on-site assistance with hardware and software use and address and resolve technical issues faced by clients or customers.
• Carry out diagnostic tests and analyses to identify the roots of technical issues.
• Liaise with team members and communicate with stakeholders in layman's terms to assess needs and system requirements.
• Record and document instances of hardware failure, repair, installation and removal.
• Stay up to date with technical developments and advancements in allied fields.

Requirements

• working hours : 7:30am - 5:15pm (5.5 days)
• Nitec in Mechanical/Mechatronics

Responsibilities

• Preparation of comprehensive tender documents, detailed bill of quantities, and the development of the project's overall budget.
• Assessment and compilation of monthly progress claims.
• Conducting cost analysis and cost control throughout the project.
• Evaluating and negotiating contracts with vendors and subcontractors.
• Collaborating with project teams to ensure adherence to budget constraints.

Requirements

• Min Diploma in Building / Construction or Quantity Surveying
• Able to use AutoCAD, Microsoft Excel, Microsoft Word
• Good communication skills
• Independent & responsible for the construction project assigned
• Resourceful & maintain good relationship with sub-contractors

Other:

• Working Day: 5.5 days per week (Alternate Saturday)
• Working Hour: 8.00am to 5.30pm (Mon to Thur) 8.00am to 5.00pm (Fri) 8.00am to 12.00pm (Sat)
• Work Location: 24/26 Tuas Avenue 2
• Transport Provided near Choa Chu Kang MRT & Boon Lay MRT

Job Title:

Part-Time Data Entry Clerk/Operations Administrator

About Us:

Linkgas Engineering is an established and locally grown company specializing in fire protection products and services. We have a strong team of consultants and field service technicians to provide comprehensive and integrated solutions for clients, especially within the F&B and Oil & Marine Offshore industries.

Job Description:

We are seeking a diligent and detail-oriented Part-Time Data Entry Clerk/Operations Administrator to join our team. The Data Entry Clerk is responsible for accurately inputting and maintaining data in our systems, ensuring data integrity, and supporting various departments with administrative tasks. If you have excellent attention to detail, strong organizational skills, and enjoy working with data, we encourage you to apply for this part-time position.

Key Responsibilities:

1. Data Entry: Input data from various sources into databases, spreadsheets, and other digital platforms.
   Verify and review data for accuracy and completeness, making necessary corrections.
   Ensure data entry is conducted efficiently and in compliance with company procedures.
2. Data Maintenance: Regularly update and maintain existing data records to reflect changes, additions, or deletions.
   Perform routine data cleaning and quality assurance checks.
   Assist in data archiving and backup procedures to prevent data loss.
3. Record Keeping: Maintain organized and up-to-date records and files.
   Retrieve data as needed and respond to data retrieval requests from other departments.
   Assist with data retrieval and reporting for audits or inquiries.
4. Data Analysis: Provide basic data analysis and reporting support to various departments.
   Assist in generating reports and summaries from the data collected.
5. Administrative Support: Assist with general administrative tasks, including filing, scanning, and photocopying documents.
   Collaborate with other departments to support their data-related needs.
   Assist in organizing and managing departmental records and documentation.

Qualifications:

• Tertiary diploma or equivalent (Students welcome to apply). Additional education in data entry or related fields is a plus.
• Proven experience as a data entry clerk or in a similar role.
• Strong typing skills with high accuracy and attention to detail.
• Proficiency in data entry software and Microsoft Office applications (e.g., Excel, Word).
• Basic knowledge of data processing and database systems.
• Strong organizational and time management skills.
• Ability to maintain confidentiality and handle sensitive information.
• Excellent written and verbal communication skills.
• Self-motivated, reliable, and a strong team player.

Work Schedule:

This is a part-time position, and part-timers have to commit at least 3 days a week, 4-5 hours a day, and at least 3 months. Please state your availability in your resume or application.

Please note that priority is given to applicants who are able to commit the most (i.e. Mon-Fri, 9AM-6PM). If you would like to learn more about full-time, permanent position options, feel free to apply as well.

Hourly Rate:

$10/Hour (Excluding Break)

How to Apply:

If you are detail-oriented, efficient, and have a passion for maintaining data accuracy, we encourage you to apply.

Linkgas Engineering is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

• To assist Operation Manager on the daily deployment for the workers, including planning of logistics for the workers to and back from job site
• To record, maintain and apply for the following passes for workers before expiration;

1. Jurong Island Pass
2. Mandatory safety passes
3. Mandatory training courses

• To maintain a good inventory records for all PPE and ensure all records are in order for audit purposes.
• To order, prepare and distribution of PPEs to the employees.
• Collection of timecards/timesheets from employees every month end and ensure that the records are in order before handling over to the Accounts
• To check on mandatory courses, compare and enroll the workers as assigned
• To assist on any ad-hoc operations' related matters as per assigned by the Operations Manager

Job Description

Sea Forrest Engineering Pte Ltd (a subsidiary of BH Global Corporation Ltd) seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Responsibilities

1) Electrical Design

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Requirements

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

Office Administration:

• Standardize and manage daily office operations.
• Responsible for the procurement and management of office supplies and facilities.
• Maintain filing and document management for administrative forms, contracts, and certificates.
• Record administrative expenses and coordinate with the finance department for cost accounting.

Activities and Coordination:

• Assist in organizing company events, such as team building, D&D.
• Coordinate employee activities and distribution of holiday gifts.

C-level Support:

• Provide administrative and secretarial support to the CEO and management team.
• Manage apartments for expatriates.

Ad-hoc:

• Assist with account applications for employees and onboarding/offboarding processes for new employees.
• Draft and publish internal notices and general administrative documents.
• Ad-hocs assigned by management.

Job Requirements:

• Fluent in both Chinese and English.
• Able to write and speak in Chinese fluently as to communicate well with the stakeholders
• 1-2 years of relevant administrative work experience.
• Strong organizational and multitasking skills.
• Proactive, detail-oriented, and able to work independently.
• Good communication and interpersonal skills.
• Proficient in Microsoft Office software (Word, Excel, PowerPoint).

Responsibilities

• Collaborate with cross-functional teams, including, electrical engineers, mechanical engineers, designers, programmers, suppliers, and stakeholders, to plan, execute, and deliver engineering projects focused on green marine systems for marine vessels within defined timelines and budgets.
• Together with core technical teams, conduct feasibility studies, evaluate technical requirements, and develop project specifications and scopes of work for green marine system integration projects.
• Coordinate and oversee engineering activities throughout the project lifecycle, ensuring adherence to project plans, standards, and regulatory requirements.
• Together with technical team, review and interpret technical drawings, schematics, and specifications to ensure accurate implementation of green marine system designs and compliance with industry standards and regulations.
• Conduct risk assessments and develop mitigation strategies to ensure the safety, efficiency, and reliability of green marine system projects.
• Monitor project progress, identify potential issues or bottlenecks, and implement corrective actions to ensure project milestones and deliverables are met.
• Manage project budgets, track expenses, and provide regular cost reports to stakeholders.
• Coordinate and track procurement activities for green marine system components.
• Collaborate with the procurement team to ensure timely delivery of materials, equipment, and services required for green marine system projects.
• Conduct regular site visits and inspections to monitor installation and integration activities, resolve technical issues, and ensure compliance with project specifications.
• Prepare and deliver project progress reports, presentations, and technical documentation to stakeholders and senior management.
• Manage delivery of documentations, including but not limited to FAT, HAT, SAT, operational and maintenance manuals.

Requirements

• Bachelor’s degree in Marine Engineering, Mechanical Engineering, Electrical Engineering, or a related field.
• Proven experience as a Project Engineer, Marine Superintendent or similar role in the marine, shipbuilding or relevant industry, with a strong track record of successfully delivering engineering projects.
• Knowledge of marine vessels systems, including electric motors, generators, batteries, power management systems, and control systems is an advantage.
• Familiarity with marine vessel propulsion systems, including diesel engines, gas turbines, and electric propulsion technologies.
• Proficiency in using engineering software and tools, such as AutoCAD, SolidWorks, and project management software.
• Strong project management skills, with the ability to plan, prioritize tasks, manage deadlines, and adapt to changing project requirements.
• Excellent analytical and problem-solving abilities, with a keen attention to detail.
• Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams and stakeholders.
• Strong leadership skills, with the ability to motivate and guide project teams.
• Knowledge of procurement processes and experience in managing supplier relationships.
• Familiarity with industry safety standards and practices, and ship classification society requirements for marine vessels.
• Ability to travel to project sites and work in outdoor or shipyard environments as needed.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools

Form tile beds using concrete, plaster, mastic, cement, glue or mortar utilizing tools such as screeds, brushes and trowels

Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise

Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results

Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly

Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go about jobs

1) Deliver goods to location designated by company

2) Must possess class 3 and class 4

3) Must be Physically Fit

4) Very familiar with Singapore Directory and roads

5) Very good driving skills

6) Clean driving record

7) Quick learner, must learn how to use the mobile app for completing delivery transactions

8) Responsible

9) Service Oriented

10) Good customer service

11) Vehicle will be provided

12) Season Parking, cashcard and diesel card provided by the company

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 8 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Job Description

• Provide administrative and contractual support and maintain all required project information throughout each project for claim purposes to ensure that the claim data are up-to-date and comprehensive.
• Verify the accuracy of survey data, including measurements and calculations conducted at survey sites.
• Consult with clients, vendors, personnel in other departments or construction foreman to discuss and formulate estimates and resolve issues.
• Prepare progressive claims and potential variation claims at regular intervals of the project.
• Able to read drawings and take out the quantity , prepare tender
• Maintaining proper documentation of correspondence from contract award to job completion to ensure all relevant claims are lodged accordingly to the client timely.
• Ensure proper closing-out of project account finalization.
• Able to draft letter to client or contractor for contractual issues

Job Responsibilities

• Possess a Civil Engineering Degree or equivalent
• Able to do Tender
• Proficient in using AutoCAD
• Familiar with sketchup and able to make 3D proposal for projects
• Preferably with 2 years of relevant working experience

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

• Set qualified sales appointments for the sales team to follow up on
• Maintain records of all telemarketing activities, including calls and follow-ups.
• Respond promptly to customer inquiries
• Identify and qualify sales opportunities to achieve weekly/monthly sales targets.
• Collaborate with the sales team to ensure seamless customer handover and follow-up.
• Conduct cold calling to clients for company’s products and services.

Requirements

• Full Training Provided (No Experience Needed)
• Comfortable to speak to customers on the phone
• Follow up with clients effectively
• Ability to work independently and meet daily targets

Working Location: Changi

Working hours : 9am to 6pm (Monday to Friday)

Job Purpose :

Engineer produces specifications for, design, develop technical drawings. He/she is expected to service and give technical advice to customers and fellow colleagues. He/she will be the main contact person for shutdown projects.

Duties and Responsibilities :

* Attend site / plant shutdown meeting

* Relay information to sales to work on preliminary quotation

* Liaise with Customers and Sales to carry out production of work orders as specified

* Liaise with Sales with regards to availability of raw materials for production or request purchase of required material when necessary.

* Monitoring progress reports on gasket usage by Customers during plan shutdown (container service) and generate weekly consumption report for customer.

* Compile and consolidate all expenses incurred by the Company (ie. manpower, overtime, meals and transportation) during shutdown project period.

* Attend to quality and technical problems at client's site and recommend the use of appropriate substitutes.

* Attend to quality and technical questions from fellow colleagues.

* Planning of work schedule for shutdown projects.

* Allocation of manpower for shutdown projects.

* Conduct product presentation to customer.

* Verify materials for use in manufacturing as specified in the work orders.

* Ensure smooth running of projects from beginning to the end.

* Ensure to meet customer's project deadline within time frame given.

* Ensure stocks are sufficient to support customers during the shutdown project.

* Maintain and housekeep all records of equipment drawings.

* Handle customer's complaint, if any

* Determine and plan training requirement needs of subordinating staff.

* Plan for the staffing requirements and recruitment of new employees if needed.

* Design technical training materials for other departments.

* Any other duties assigned by Business Unit Manager.