1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

• Supporting project communication systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.
• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation

Requirements

Primary Work Location: Jurong East Hub

Working Hours : 8.30am – 6pm

Qualification : Diploma in Mechatronic, Mechanical, Electrical & Electronic

Job Description:

• To assist in contract administration, budget control, prepare progress claim(s) and liaise with the Client’s representative on claims and variation costs;

• Call quotations, evaluation of price comparison and prepare bill of quantities to arrive at the tender pricing

• To review and verify the Subcontractor’s / Supplier’s claims and prepare payment certificates

• To attend site meeting and progress claim meeting;

• Monitor project Income expenditure.

• Provide support in any other ad hoc duties as assigned from time to time.

Job Requirement:

• Associate Degree / Higher Diploma or above in Quantity Surveying or related disciplines

• Minimum 2 years relevant working experience in construction

• Entry level candidates will also be considered

• Good command of spoken and written English

• Be adaptable and able to work independently coupled with strong interpersonal skills

• Proficiency in Microsoft Office

Job Description

• Loading and unloading materials onto and from lorries.
• Move production materials between different work processes.
• Packing of finished goods for loading.
• Check supplier's delivered material quantity.
• Check correct delivery items to customers with delivery order.
• Arrange materials for next delivery.
• Proper arrangements and storage of materials and finished goods.
• Liase with production supervisors and drivers for delivery planning and goods movement.
• Regular care and maintenance of forklift.
• 5 Days Work Week.

Requirements

• Possess a valid Forklift Liscense.
• Have confidence and safety knowledge to handle long steel materials with forklift.
• Possess a calm and analytical mindset to manage priorities, able to sort out conflicting schedules independently and come up with good arrangements.
• Active in communicating information to various departments via walkie talkie app. Active discussion of conflicting schedules and updates with supervisors is highly encouraged and appreciated.

Job Description

• Oversee the day to day running of all matters relating to the construction of this project with the assistance of M&E staffs, mainly on mechanical & electrical works.
• Liaison with external parties such as clients, client representatives and authorities, etc.
• Co-ordinate the works carried out by his/her M&E Engineer and M&E Co-ordinators.
• Coordinate with consultants, engineers, and other stakeholders to develop detailed M&E plans and specifications.
• Review safety reports on compliance and non-compliance to regulatory and organizational Workplace Safety and Health (WSH) policies and Environmental Management System (EMS) standards and practices.
• Monitor progress and performance of M&E works, identifying any deviations or issues and implementing corrective measures as required.
• Manage sub-con/in progress production planning & build.
• Monitoring M&E services variation works and costs during construction stage to ensure within budget.

Requirements

• Minimum a recognized Bachelor’s Degree/Diploma in Mechanical/Electrical/Construction Engineering or other building-related disciplines.
• At least 5 years of working experience in building and construction projects.
• Working knowledge in BIM model software.
• Strong technical knowledge of mechanical and electrical systems, including HVAC, plumbing, electrical distribution, and fire protection.
• Familiarity with building codes, regulations, and safety standards related to M&E installations.
• Team player and able to communicate well with the team.
• Strong problem-solving and decision-making abilities, with a keen attention to detail.
• Location is at Neythal Road
• 5.5 work day

• Prepare correspondence emails, letters, statements, documents, and reports
• Draft the company's policies, regulations, and rules, and supervise the implementation.
• Manage filing and document control for company policies, regulations, SOPs, contracts & agreements, reports, and other administrative documents.
• Possess legal knowledge and liaise with lawyers when required.
• Fully in charge of the administration department and managing administrative issues for the company.
• Process administrative work related to government authorities, associations, the company’s head office, customers, and visitors.
• Handle administrative and logistical arrangements for customers and visitors.
• Organize events by coordinating with relevant departments for planning and implementation.
• Collect training requirements from relevant departments, prepare the company training plan, and supervise its implementation.
• Collect and arrange daily and weekly activities for company management.
• Manage vehicles and drivers for the company.
• Provide backup support for colleagues in IT and HR positions.
• Undertake any other ad-hoc tasks and duties as assigned by superiors.

Responsibilities

· Installs and repairs wiring, fixtures, and equipment for all electrical services aboard ship and in shipyard facilities, following blueprints and wiring diagrams

· Installs conduit to bulkheads with brackets and screws, using hand tools, and threads wires through conduit to terminals, for example connection boxes, circuit breakers, voltage regulators, and switch panels.

· Tests electrical characteristics, for example, voltage, resistance, and phase angle, in circuits, using voltmeters, ohmmeters, and phase rotation indicators

· Troubleshoots electrical equipment and circuits using appropriate test equipment to detect and effect required maintenance, repairs, or replacement requirements

· Performs maintenance and repair of generators, switchboards, controllers, circuit breakers, electrical motors, distribution panels, alarm and lighting circuits

· Conducts insulation resistance measurements of electrical cables to determine condition and effects repairs or replacements as required.

· Maintains electrical system maintenance histories notating date, and extent of repairs and/or alterations

· Adhere to Bizsafe safety standards and ISO quality standards

· Electrical automation control system: to install, troubleshoot, repair and modify the new control system.

Requirements

·Willing to work in outdoor harsh conditions e.g heat, oil, noise and dust

·NTC/Higher NTC in Electrical/Mechatronics/M&E Engineering and related field.

·Preferably with at least 1- 2 years working experience in electrical repairs and maintenance.

·Preferably to have experience in DC/AC motors, Generators, Switchboards and Circuit breakers.

·Able to perform troubleshooting and fault rectification during daily operations

·Positive-attitude

·** High OT

Job Description

• Take lead role as trainer for Surveillance security training courses.
• Provide technical training to customers and end users at our Training Centres and other sites as necessary in support of Security Products business needs.
• Responsible for managing of training facilities and equipment.
• Review training material to ensure that they are up to date with the latest development and assist to design of training programs or materials.
• Manage proper documentation for training requirements to ensure compliance with policies for auditing purposes.
• Industrial attachments with our Partners, so to stay relevance and current when conducting Training

Job Requirement

• Minimum Diploma in M&E or relevant industry.
• With at least 3 to 5 years of experience in the surveillance security CCTV industry, technical training experience or combined training/customer service experience.
• ACTA or ACLP certified required
• WSQ Advanced Certificate in Security
• Excellent verbal and written skills in English are required; present professional and easily understood technical topics to groups.
• Location is at Shan Road
• 5 days work week, require to work on Saturday (Half Day) when necessary

Degree in Mechanical Engineering

Minimum 3 years M & E Experience

Experience in Fire Sprinkler System

Autocad Skills and Computer Skills

independent Self-motivated, hard working and able to work as a team

To assist Project Manager to liaise with clients and consultants on Projects

To co-ordinate sub-contract works

Job Requirement

1. Minimum Bachelor degree with at least Six (6) years’ relevant field safety experience in supervision of installation and maintenance of roadside and Civil and structural coordination with government/utility agencies and other contractors.

2. Experience as a safety auditor/inspector in ensuring Environmental, Safety and Health practices are complied with.

3. Strong analytical and problem-solving skills, resourceful and meticulous.

4. Highly motivated and pro-active with the ability to work both independently as well as in a team.

5. Proficient in Microsoft Office (Outlook, Word, Excel, and PowerPoint for Windows.

6. Good verbal communication and writing skills in English.

7. Be expected to travel regularly between office and sites.

8. Prepared to work on site and perform night work based on project needs.

Job Description

1. Oversee the works on equipment structures, installations, deployments, facilities, and equipment being deployed at sites.

2. Plan and work out the resource provision requirements, work, schedule, and Standard Operating Procedures (SOP) for works at sites.

3. Review planned work schedule and method statements prior to commencement of site work activities.

4. Ensure that works are carried out accordingly to design, meeting the safety, health, environmental and comfort requirement for stakeholders.

5. Identify defects and damages at the site infrastructures, including equipment and facilities, as well as theft, accidents, and incidents.

6. Carry out safety training to instil safety awareness. Ensure safety rules and regulations at sites are adhered to by all site personnel.

7. Be part of Safety Committee and ensure compliance to safety, health and environmental requirements including Authority Code of Practices (COP) and WSH, MOH & MOM Guidelines.

8. Resolve any unexpected problems or difficulties that may arise at sites.

10. Prepare regular reports to update site progress, resource utilisation, requirements, past and on-going activities, etc.

Please email your resume to [email protected]

Location: Jurong West Area

Need to know Zeiss CMM Program

Need to Know Zeiss CMM Operation

Have Quality Assuarnce & Quality Control Knowledge

Know incoming / In-process / External provider parts insepection

Know prepare of quality documentation and maintenance documents like daliy Monitoring Data and Monthly Data performance

Will preapare of documentation for customer audit and ISO audit

Job Highlights

• Well versed in ISO 9001, QA metholodogies & tools
• Scope to innovate & develop continuous improvement processes

Job Description

• Develop & implement QMS system & take the lead of continuous improvement process & initiatives
• Provide root cause analysis & preventive action plans to resolve non-compliance issues
• Analyze internal & external data to identify areas for improvement & communicate with relevant parties for quality improvements
• Ensure the compliance with ISO 9001 & all relevant standards to both internal company policies & customer standards
• Maintains and implements the Quality Management System (QMS) for the organization.
• Manages Quality Assurance and Quality Control (QA&QC) by conducting audits for quality system conformance, and by liaising across departments to maintain good documentation control and management.
• Conducts investigations into inconsistent quality processes and non-conformance and recommends preventive actions to eliminate recurrences of such issues.
• Monitors product failure data and performance trends, and initiates remedial actions with relevant departments, where necessary.
• Identifies opportunities and prepares recommendations for continuous improvement in quality, productivity and cost efficiency.
• Handle Customer Complaint resolution, onsite & offsite
• Lead supervise OQA production lot acceptance and FAI submission team for achieving OTD objective.

Job Requirements

• Diploma/Bachelor Degree in Precision Engineering, Mechanical, Quality, Engineering or equivalent.
• Meticulous, thinks systematically and is able to work independently.
• Possesses good organization, problem-solving, interpersonal and communication skills.
• Good knowledge of Quality Management System and ISO 9001-2015. Certified Auditor will be a plus.
• Knowledge of LEAN Six Sigma and 8D Discipline methodology highly desirable.
• MS Excel, PowerPoint a MUST and ERP knowledge an advantage.
• Only Singaporean may apply.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. ITE in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal and communication skills

· Initiative and results driven

· Entry level candidate are welcome

Reporting to the Company Security Manager, the Security Executive will ensure Industrial Security compliance for the Business Unit in the areas of Physical, Information, Personnel and Document Security according to policies and SOPs.

Responsibilities:

• Build security awareness and culture through conduct of regular and scheduled briefing, training and broadcast reminders
• Ensure security compliance in accordance with security SOPs and policies
• Assist in the conducting scheduled internal audits and no-notice spot-checks
• Support any tasks as assigned by management

Requirements:

• ​​​​​​​Experience in introducing and implementing new security initiatives or enhancing existing security measures
• Knowledge in IT and network security would be an added advantage

Job Description

• Provide administrative and contractual support and maintain all required project information throughout each project for claim purposes to ensure that the claim data are up-to-date and comprehensive.
• Verify the accuracy of survey data, including measurements and calculations conducted at survey sites.
• Consult with clients, vendors, personnel in other departments or construction foreman to discuss and formulate estimates and resolve issues.
• Prepare progressive claims and potential variaton claims at regular intervals of the project.
• Maitaining proper documentation of correspondence from contract award to job completion to ensure all relevant claims are lodged accordingly to the client timely.
• Ensure proper closing-out of project account finalization.

Job Specification

• At least a degree in Civil Engineering or equivalent.
• At least 8 years of Singapore based Quantity Surveyor working experience in the related field is required for this position.
• Candidate with experience in Engineering, Procurement, Construction (EPC) will be preferred.
• Willing to work in the West.
• Remuneration will be commensurate in according to working experience.

Key Responsibilities:

• Design and develop electrical systems, components, and wiring diagrams.
• Design and oversee the electronics hardware design activities of the whole product.
• Select electrical/electronics components for new product development, and replacement for existing products as well.
• Conduct electrical testing and troubleshoot systems to ensure functionality.
• Collaborate with cross-functional teams (e.g., mechanical) on product development.
• Liaise with supplier and operation for design improvement.
• Provide technical support of products introduced into both the domestic and international markets.
• Work closely with a multidisciplinary team to drive cost optimization, manufacturability, quality and reliability.
• Provide technical support during installation, commissioning, and maintenance of systems.

Requirements:

• Bachelor’s degree in electrical engineering or related field.
• Proficient in electrical design software tools
• Strong knowledge of electrical systems, power distribution, control systems, and circuit design.
• Strong problem-solving skills and attention to detail.
• Hands-on experience with hardware testing, troubleshooting, and equipment commissioning.
• Experience in microcontroller platform hardware design is a plus
• Knowledge of HVAC systems is a plus.

Responsibilities

• Research and develop air conditioning system/product for industrial and commercial use
• Design and optimization of mechanical components/system for HVAC systems
• Analysis of mechanical systems, including structural, fatigue, thermal and vibration
• Develop manufacturing drawings in accordance with applicable standards
• Engineering product design, optimization, cost down and scale-up for mass production
• Product certification, quality control and design for manufacturing and ease of maintenance
• Collaborate and interact with external vendors for component selection, manufacturing and system assembly
• Read, interpret and review technical drawings, schematics, and computer-generated reports
• Generate operating procedures and provide technical information
• Collaborate and analyze customer design proposals, specifications and requirement, and to evaluate and propose solutions

Requirements

• Bachelor's Degree in mechanical Engineering or equivalent engineering degrees
• Good mechanical aptitude and knowledge
• Proficient in SolidWorks and modeling
• Excellent problem solving and project management skills
• Background in HVAC engineering especially chiller operation and optimisation is a plus
• Experience in R&D and product development especially in air conditioning system is a plus
• Knowledge in new product introduction from R&D to commercial stage
• Technically sound coupled with experience in sourcing, negotiation and cost control
• Possess initiatives, logical thinking and good analytical abilities, and able to resolve issues from multiple perspectives.
• Passion for the job and a challenging spirit preferred.
• Strong communications and interpersonal skills

The person will be responsible for

1) Prepare & compile Monthly Progress Claim for all the projects;

2) Prepare & submit Variation Order for all projects where applicable;

3) Quantity Take-off;

4) Assist in monitoring & compilation of all ISO 9001, ISO14001 & ISO45001 documentation for Audit & BCA Accreditation;

5) Any others relevant task that maybe assign from time to time

Qualifications : Diploma in related field;

Experience : Fresh or 2 years relevant experience will be added advantage;

• Engage in the installation, repair and maintenance of various technology-based equipment.
• Conduct regular checks and troubleshooting to ensure the technical equipment operates at its optimal performance.
• Provide on-site assistance with hardware and software use and address and resolve technical issues faced by clients or customers.
• Carry out diagnostic tests and analyses to identify the roots of technical issues.
• Liaise with team members and communicate with stakeholders in layman's terms to assess needs and system requirements.
• Record and document instances of hardware failure, repair, installation and removal.
• Stay up to date with technical developments and advancements in allied fields.

Requirements

• working hours : 7:30am - 5:15pm (5.5 days)
• Nitec in Mechanical/Mechatronics

Responsibilities

• Preparation of comprehensive tender documents, detailed bill of quantities, and the development of the project's overall budget.
• Assessment and compilation of monthly progress claims.
• Conducting cost analysis and cost control throughout the project.
• Evaluating and negotiating contracts with vendors and subcontractors.
• Collaborating with project teams to ensure adherence to budget constraints.

Requirements

• Min Diploma in Building / Construction or Quantity Surveying
• Able to use AutoCAD, Microsoft Excel, Microsoft Word
• Good communication skills
• Independent & responsible for the construction project assigned
• Resourceful & maintain good relationship with sub-contractors

Other:

• Working Day: 5.5 days per week (Alternate Saturday)
• Working Hour: 8.00am to 5.30pm (Mon to Thur) 8.00am to 5.00pm (Fri) 8.00am to 12.00pm (Sat)
• Work Location: 24/26 Tuas Avenue 2
• Transport Provided near Choa Chu Kang MRT & Boon Lay MRT

Job Title:

Part-Time Data Entry Clerk/Operations Administrator

About Us:

Linkgas Engineering is an established and locally grown company specializing in fire protection products and services. We have a strong team of consultants and field service technicians to provide comprehensive and integrated solutions for clients, especially within the F&B and Oil & Marine Offshore industries.

Job Description:

We are seeking a diligent and detail-oriented Part-Time Data Entry Clerk/Operations Administrator to join our team. The Data Entry Clerk is responsible for accurately inputting and maintaining data in our systems, ensuring data integrity, and supporting various departments with administrative tasks. If you have excellent attention to detail, strong organizational skills, and enjoy working with data, we encourage you to apply for this part-time position.

Key Responsibilities:

1. Data Entry: Input data from various sources into databases, spreadsheets, and other digital platforms.
   Verify and review data for accuracy and completeness, making necessary corrections.
   Ensure data entry is conducted efficiently and in compliance with company procedures.
2. Data Maintenance: Regularly update and maintain existing data records to reflect changes, additions, or deletions.
   Perform routine data cleaning and quality assurance checks.
   Assist in data archiving and backup procedures to prevent data loss.
3. Record Keeping: Maintain organized and up-to-date records and files.
   Retrieve data as needed and respond to data retrieval requests from other departments.
   Assist with data retrieval and reporting for audits or inquiries.
4. Data Analysis: Provide basic data analysis and reporting support to various departments.
   Assist in generating reports and summaries from the data collected.
5. Administrative Support: Assist with general administrative tasks, including filing, scanning, and photocopying documents.
   Collaborate with other departments to support their data-related needs.
   Assist in organizing and managing departmental records and documentation.

Qualifications:

• Tertiary diploma or equivalent (Students welcome to apply). Additional education in data entry or related fields is a plus.
• Proven experience as a data entry clerk or in a similar role.
• Strong typing skills with high accuracy and attention to detail.
• Proficiency in data entry software and Microsoft Office applications (e.g., Excel, Word).
• Basic knowledge of data processing and database systems.
• Strong organizational and time management skills.
• Ability to maintain confidentiality and handle sensitive information.
• Excellent written and verbal communication skills.
• Self-motivated, reliable, and a strong team player.

Work Schedule:

This is a part-time position, and part-timers have to commit at least 3 days a week, 4-5 hours a day, and at least 3 months. Please state your availability in your resume or application.

Please note that priority is given to applicants who are able to commit the most (i.e. Mon-Fri, 9AM-6PM). If you would like to learn more about full-time, permanent position options, feel free to apply as well.

Hourly Rate:

$10/Hour (Excluding Break)

How to Apply:

If you are detail-oriented, efficient, and have a passion for maintaining data accuracy, we encourage you to apply.

Linkgas Engineering is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Responsibilities

• Provide administrative support to the department
• Keep proper documentation & filing system
• Process billing
• General administrative duties
• Minutes recorder

Job Requirements

• Min secondary education
• Able to work independently
• Knowledge of Microsoft Words and Excel application

Other Information

• 5 days’ work week

Be a part of our diverse family at Hai Leck, embracing each other as you discover your unique career potential and find your perfect fit with us. We are committed to unlocking your potential and guiding you to success. Our employees are valued down to their skills, and we are committed to training them and expanding their knowledge.

We would be pleased to welcome you at our family in Hai Leck if you are a suitable member.

Email us at [email protected] now!

We are seeking a highly skilled Automotive Cybersecurity Specialist to join our team. The ideal candidate will be responsible for ensuring the security of our automotive systems and protecting them from cyber threats. This role involves working closely with cross-functional teams to design, implement, and maintain robust cybersecurity measures for our automotive products.

Key Responsibilities:

Technical Proficiency:

• Develop and implement security measures for automotive systems, including CAN (Controller Area Network) and Ethernet networks.
• Conduct vulnerability assessments and penetration testing on automotive systems to identify and mitigate security risks.
• Utilize security tools and technologies such as SIEM (Security Information and Event Management), IDS/IPS (Intrusion Detection/Prevention Systems), and firewalls.

Knowledge of Automotive Cybersecurity Standards:

• Ensure compliance with automotive cybersecurity standards such as ISO/SAE 21434 and UNECE WP.29.
• Stay updated with the latest developments in automotive cybersecurity regulations and best practices.

Risk Management:

• Identify, assess, and mitigate cybersecurity risks specific to automotive systems.
• Develop and implement risk management strategies tailored to the automotive industry.

Security Architecture and Design:

• Design and implement secure architectures for automotive systems, including in-vehicle networks and connected vehicle infrastructure.
• Collaborate with engineering teams to integrate security into the design and development of automotive products.

Communication and Collaboration:

• Work closely with cross-functional teams, including engineering, IT, and compliance, to ensure the security of automotive systems.
• Communicate complex cybersecurity concepts to non-technical stakeholders.

Continuous Learning and Adaptability:

• Stay updated with the latest trends and threats in automotive cybersecurity.
• Pursue relevant certifications such as CISSP, CISM, or CEH, with a focus on automotive cybersecurity.

Analytical and Problem-Solving Skills:

• Analyze and resolve security issues in automotive systems.
• Think critically and make informed decisions under pressure.

Qualifications:

• Bachelor's degree in Computer Science, Information Security, or a related field.
• Proven experience in automotive cybersecurity or a related field.
• Strong understanding of automotive systems and networks, including CAN and Ethernet.
• Familiarity with automotive cybersecurity standards and regulations is an advantage.
• Excellent problem-solving and analytical skills.
• Strong communication and collaboration skills.

Responsibilities:

• Design of hydraulic schematics
• Sourcing and sizing of components
• Modelling and drafting using CAD software
• Generate the EBOM and prepare design documents
• Integrate and testing of hydro-pneumatics system

Requirements:

• Keen interest in Mobile System Hydraulics and Pneumatics engineering and technology
• Must be competent with CAD Software such as Unigraphics and SolidWorks
• Knowledge in drafting, geometric dimensioning & tolerancing (GD&T) preferred
• Able to read and interpret fabrication/ mechanical/ assembly drawings
• Able to read and interpret electrical/ hydraulics/ pneumatic schematics
• Strong analytical skills is a plus
• Possessing a valid class 3 license is a plus
• Able to work independently and effectively with peers, resourceful and keen to learn
• Must be a team player with good communication skills
• Willing to perform hands-on work in the workshop/on the vehicle

Responsibilities:

• Perform administrative and general office support.
• Maintains both physical and digital filing system.
• Assist with SAP requests, DO and invoice processing.
• Assist with updating dept budgets and expenses.
• Assist with Dept budget and expenses tracking.
• Track and manage fixed Asset.
• Control and update records for PSM devices in TCSI.
• Maintain the stationery cabinets, ensuring items are properly stocked and replenished when necessary.
• Submit security clearance application for staff.
• Assist in onboarding new staff by preparing necessary document and orientation sessions.

Requirements:

• Minimum O/ A Level
• Minimum 1 year of administrative experience
• Good Knowledge in MS office
• Good Interpersonal, presentation & communication skills
• Well organized and able to work independently with min supervision
• Good team player
• Experience developing internal processes and filing systems
• Candidate with some finance accounting knowledge will be an advantage