Roles & Responsibilities

Driver - Responsibilities

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company lorry to pick up workers, to or from site, office and dormitory etc.

1.1 The Driver must drive the vehicles to the required work sites punctually.

1.2 The Driver must follow the schedule or ad-hoc obtained from the Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

1.3 The Driver must inform the Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

1.4 Aside from driving the workers to site, rest of the time will be to support office courier needs.

2 Usage of Company vehicles

2.1 The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

2.2 The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. Otherwise, costs will not be reimbursed.

3 Safety

3.1 The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

3.2 If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

3.3 The Driver must inform the Director or PIC immediately that he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

3.4 The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

3.5 The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

4.1 The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

4.2 The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

4.3 The Driver will drive the vehicles to Inspection Centres as required.

The above is an overview of the work scope and responsibilities of a Driver employed by the Company. It is by no means an exhaustive list. There may be other scope and responsibilities deemed normal by the industry which by default will be included in this Appendix.

Schedule:

Day shift: 5.5 days per week

Requirement:

1. Minimum Class 3 Singapore Driver's license

2. Familiar with the marine industry procedures

3. Good driving track record

4. Familiarity with Singapore roads and ERP time

5. This job may require some late work. OT allowance will be given.

6. Fit and in good health

Key Roles and Responsibilities

• Assist the Site Project manager in monitoring and managing the day-to-day operation of the projects.
• To support Site Project Manager in managing day-to-day clients’ interactions and expectations for optimal results
• To support Site Project Manager to collaborate with peers, liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare and submit method of statement, sketches, site record and other technical submissions in a timely manner.
• To prepare Inspection and Test Plan, user manuals, drawings and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification, and submit technical clarification to the clients and consultants.
• Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Assist the Project Manager in the preparation of reports and presentation to management, clients and stakeholders.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
• Perform any other tasks as and when required so as to meet project milestones

Requirements

• Min Diploma or Higher Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 3 years working experience
• Hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Hands-on experience in security system configuration, System Networking and integration with third-party systems will be an advantage
• Willing to take ownership and Pro-active in Problem solving
• Must be a team player and strong verbal and written communication skills
• Customer service and business orientated with good initiative and adaptability
• Required to perform standby duties whenever required
• Driving License – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road / Site Office
• 5.5 work days

Job Description:

- Prepare weekly reports on vehicle repair status.

- Assist in writing meeting minutes to track outstanding issues.

- Conduct team briefings before starting work.

- Coordinate and manage team assignments and vehicle parking allocation.

- Plan and monitor vehicle sequencing and status for operational tasks.

- Provide documentation support to the Operations Leader for work-related needs.

Job Requirements:

- Degree in Engineering (Mechanical, Electrical, Hydraulic, Automotive, Electrical & Electronics, Mechatronics) or a Diploma in a related field with 5 years of relevant industry experience.

- Strong team player.

- Ability to lead a team effectively.

• Preparing reports: Accounting assistants prepare financial statements, budgets, and other reports.
• Bank reconciliations: Accounts assistants reconcile accounts and expenditures.
• Handling communication with clients: Accounting assistants communicate with clients and vendors about billing and payments. They follow up on money owed and answer questions about bills.
• Payroll: Accounting assistants track hours, calculate deductions, and manage funds withheld for taxes.
• Processing invoices and payments: Accounting assistants prepare and process invoices and payments.
• Assisting in audits: Accounting assistants may assist with audits.
• Maintaining financial records: Accounting assistants maintain financial records and update procedural documentation.
• Working with spreadsheets: Accounting assistants work with spreadsheets, sales and purchase ledgers, and journals.
• Recording and filing cash transactions: Accounting assistants record and file cash transactions.
• Controlling credit and chasing debt: Accounting assistants control credit and chase debt.
• Liaising with third party providers, clients, and suppliers: Accounting assistants liaise with third party
• Handle partial sets of accounts, including Accounts Payable (AP) and Accounts Receivable (AR).
• Ensure timely recording of creditor invoices and payment transactions and follow up with billings and cheque collections.
• Input daily and monthly sales reports.
• Accounting Assiatant need to submit CPF constributions.
• Retrieve and resend invoices, credit notes, and statements of accounts.
• Participate in cash flow calculations and preparation.
• Accounting Assiatant need to follow up company auditor.
• Perform weekly and monthly bank reconciliations.
• Provide administrative support as required.
• Accounting Assiatant assist prepare GST fillings and records.
• Maintain Project Quotation, PO, WO, LOA Signed documents.
• providers, clients, and suppliers.
• Suppliers Agreements prepare and keep records
• Accounting Assistant need to prepare Monthly Invoice for Suppliers
• Maintain Workers Loan List
• OED Survey Need to submit.
• Accounting Assistant need to handle Small Claims Follow-Up Details.
• Checking and responding to emails on daily basis to get updated on the work
• Being consistent, accurate, and great in minimizing errors
• Support audit and tax queries
• Liaise with banks on banking transactions

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Develop and implement operational policies and procedures for efficient operations.
• Enhance systems, processes, and best practices.
• Manage day-to-day operations, overseeing the operations team and department.
• Ensure organizational processes comply with legal regulations and standards.
• Uphold health and safety guidelines and enforce compliance.
• Monitor employee and team performance, offering coaching, training, and feedback for improvement.
• Handle budgets, forecasting, and resource allocation to meet strategic goals.
• Collaborate cross-departmentally to align operations with organizational objectives.
• Cultivate and maintain relationships with vendors and suppliers.
• Negotiate contracts for favorable pricing with suppliers and vendors.
• Optimize business travel processes, secure corporate rates, automate expense reports, and ensure compliance.
• Implement quality assurance measures for products/services and monitor production KPIs.
• Enhance customer service quality and satisfaction.
• Analyze data to identify process improvement opportunities and cost savings.
• Manage supply chain processes, including inventory, production, sales, and sourcing.
• Optimize workflows and processes for efficiency and cost-effectiveness.

JOB DESCRIPTION

1. Responsible for overall project progress and ensure project is complete within the specific time, within budget and meet client’s requirement;
2. Liaise with design team on engineering and design issues;
3. Responsible for planning and deployment of resources such as manpower, machinery, equipment and material;
4. Resolve any disputes/clarifications during the execution of project;
5. Ensures settlement of project final accounts at the end of the contract;
6. Prepares and attends project budget presentation and review;
7. Prepares audit reports;
8. Chairs Safety and Health coordination meetings.

REQUIREMENT

1. Diploma in Mechanical Engineering or Equivalent Certificate;

2. At least 3 years of relevant experience in the Marine Industry;

3. Good office coordination skill and interpersonal skill;

4. Independent and resourceful;

5. Good communication skill;

6. Able to handle pressure;

7. Preferably able to understand and read Mandarin.

JOB DESCRIPTION

- To support Operation Manager to initiate, plan, execute, monitor and control for the entire company’s ongoing projects.

- Coordination between departments from QA/QC, Finance, Engineering, Projects, production, logistic, commercial in local and oversea for smooth operation

- Identifying inefficiencies and areas of improvement

- Resource management

- Any additional tasks out of the above assign by the management

QUALIFICATION:

- Degree/diploma in mechanical/electrical

- Previous HVAC/ACMV experience in Marine/ industry/ land preferred

- Fresh graduate with good working attitude and willing to learn sprit are welcome to apply

Job Description

Candidate will be tasked to do the programming for various CNC machines. Company's main machines are laser, turret, pressbrake, bandsaw and plasma cutting.

• Able to interprete sheet metal drawings like panels, claddings etc.
• Have experience in either 1 of the 4 CNC machines - laser, turret, pressbrake or plasma cut.
• Willing to undertake training to do programming for all CNC machines.

Need to have engineering knowledge, comprehension of technical documents. Excellent written and spoken communication skills • Possess troubleshooting skills in engineering works • Proven leadership skills with a large and diverse workforce o Be able to work in a fast-moving environment, under pressure and long working hours, when needed.

We are looking for an energetic, trustworthy, and self-starter candidate who could be handy in paperwork preparation and supervision at the worksite, overseeing projects, maintaining safety protocols, and implementing site procedures. Our ideal candidate is experienced, responsible, and team-focused.

Key Roles and Responsibilities

• To troubleshoot and maintain/service security systems at clients’ premises
• Attend to fault calls during office hours and standby duties after office hours in rotating duty roster
• Liaise closely with client representatives on all service/maintenance related issues.
• Manage day-to-day client interactions and expectations for optimal results..
• Familiarize yourself and deliver customer satisfaction base on each client’s business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required

Requirements

• Min Higher Nitec & Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 2 years working experience.
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.
• Knowledge in IT/Network/Server is an added advantage.
• Good interpersonal and problem solving skills.
• Independent, self-motivated individual whom is able to work under minimum supervision.
• Required to perform standby duties
• Driving License – Preferably if candidate possess own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road
• 5.5 work day

Green Star Engineering Pte Ltd looking for an Energetic Managing Director for the Organisation's upcoming projects.

• Develop and execute the company’s business strategies in order to attain the goals of the board and shareholders
• Provide strategic advice to the board and Chairperson so that they will have accurate view of the market and the company’s future
• Prepare and implement comprehensive business plans to facilitate achievement by planning cost-effective operations and market development activities
• Ensure company policies and legal guidelines are communicated all the way from the top down in the company and that they are followed at all times
• Communicate and maintain trust relationships with shareholders, business partners and authorities
• Oversee the company’s financial performance, investments and other business ventures
• Delegate responsibilities and supervise the work of executives providing guidance and motivation to drive maximum performance
• Read all submitted reports by lower rank managers to reward performance, prevent issues and resolve problems
• Act as the public speaker and public relations representative of the company in ways that strengthen its profile
• Analyze problematic situations and occurrences and provide solutions to ensure company survival and growth

Requirements and skills

• Proven experience as Managing Director or other managerial position
• Demonstrable experience in developing strategic and business plans
• Thorough knowledge of market changes and forces that influence the company
• Strong understanding of corporate finance and measures of performance
• Familiarity with corporate law and management best practices
• Excellent organisational and leadership skills
• Excellent communication, interpersonal and presentation skills
• Outstanding analytical and problem-solving abilities
• Diploma holders are also welcome

The person will be responsible for

1) Prepare & compile Monthly Progress Claim for all the projects;

2) Prepare & submit Variation Order for all projects where applicable;

3) Quantity Take-off;

4) Assist in monitoring & compilation of all ISO 9001, ISO14001 & ISO45001 documentation for Audit & BCA Accreditation;

5) Any others relevant task that maybe assign from time to time

Qualifications : Diploma in related field;

Experience : Fresh or 2 years relevant experience will be added advantage;

Job Responsibilities:

• Prepare import/export documents
• Coordinate with vendors/customers for delivery arrangements
• Work with logistics partners to ensure timely and accurate shipments
• Ensure shipment documents comply with customs regulations
• Ensure timely invoicing of shipments as per company KPIs
• Maintain accurate and up-to-date shipping records
• Monitor production schedules and release work orders to meet shipment deadlines
• Prepare and review quotes based on customer requests
• Review contracts to ensure consistency with quotes
• Support purchase order generation, order confirmation, and delivery

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Administrator
• Preferred with knowledge of SAP
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

• Young & energetic

• Committed to teamwork

• PLC programming

• Minimum Diploma or experience in relevant field (e.g., electronics/ electrical)

• Control panel fabrication

• AutoCAD

• Field troubleshooting

• Site survey/coordination

Roles & Responsibilities

1. Implement the organization’s SHMS at office and site to manage risks and prevent accidents.
2. Initiates, review and implement the workplace safety, health and environment programs and initiatives.
3. Enforcement of safety standards in accordance with the Workplace Safety and Health Act and ensure familiarity with any statutory changes or updates.
4. Liaise with MOM and other relevant authorities on WSH-related matters as applicable.
5. Conduct training programs on workplace safety and health and inspections to ensure that all staff and/or subcontractors onsite abide by policies and standards.
6. Lead a team of WSH Co-ordinators to ensure strict compliance of procedures in statutory workplace, safety, health & environment requirements at sites and required premises.
7. Preparation and/or submission of MSRA, safety reports and necessary audits.
8. Assist the company in safety related certifications and awareness such as safety audits, ISO & Bizsafe audits, etc
9. Attend client/consultant safety meetings/weekly coordination meetings & technical meetings.
10. Lead investigation and maintain records for every first aid case, accident and near miss at the work site.
11. Conduct emergency drills periodically.
12. Any other ad hoc duties assigned by management.
13. Must be a Singapore Registered Safety Officer/Workplace Safety & Health Officer with MOM.

Responsibilities:

• Responsible for leading the software development in R&D centre and co-innovation with customers
• Work closely with headquarter and oversea branch offices to develop global products
• Drive the product planning, development to maintenance for control systems
• Provide strong leadership for members with specific skills on software development for control system
• Mentor team members and foster knowledge sharing

Requirement:

• Master / Degree in Engineering, Science, Management
• Minimum 5 years of relevant experience in technology development, research, or innovation in sensing, control and optimization.
• Proven track record of leading successful grant applications, research collaborations and projects execution.
• Relevant data analytics and programming skills needed to support the research work.
• Experience in handling both agile projects and an industry projects.

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

Job Description

• Provides support on quality systems, processes, and procedures to ensure compliance with FM Contract, Company’s, and ISO policies.
• Responsible for preparing and conducting quality control checks, investigations for potential quality non-conformance, compliance concerns and recommend follow-up actions to mitigate such issues on Building Facilities including M&E Systems, Building Systems and soft services.
• Prepare report for management review and facilitate for follow-up actions required.
• Attend regular maintenance meetings on behalf of the Company with Clients and Clients’ Representatives.
• Lead the internal audit program for operation site include identifying opportunities for quality systems’ improvements and meet company’s quality objectives.
• Maintain good records and filing systems of reports for future reference and coordination

Job Requirement

• At least 3-5 years relevant working experience in Engineering, Facilities or Estates Management, Quality Management Systems, Quality Control or equivalent.
• Minimally Diploma in any Engineering field, Facilities or Estates Management or equivalent with knowledge in ISO Standards 9001, 14001 and/or 41001.
• Certified QMS Auditor / Lead Auditor in ISO or equivalent will be advantageous.
• Pro-active, independent yet service and team-oriented, and able to perform under pressure with minimal supervision.
• Strong interpersonal and communication skills with ability to work cross-functionally with different departments to meet timeline and objectives.
• Location is at Singapore Polytechnic
• 5.5 work day

Responsibilities:

• Assist stakeholders to identify any unsafe condition or unsafe work practice
• Recommend stakeholders to implement reasonable and practical measure
• Assist in developing and monitoring EHS programme and policies
• Conduct EHS (Environmental, Health & Safety) inspection/surveys within Land Systems plants and recommend appropriate corrective measures
• Establish and deliver/communicate EHS deliverables and training
• Assist in the investigations and reporting of accidents/incidents and recommend preventive and correctives measures
• Plan and conduct internal and external audits as per statutory requirements (i.e. ISO 14001 and ISO 45001)
• Monitoring of EHS work plan and objectives
• Plan and coordinate MOM regulatory medical examination(s) and report
• Review and update of EHS documents (i.e. Risk Assessment, Safe Work Procedures, Lifting Plan)
• All other ad-hoc duties as assigned by Management

Requirements

• Minimum a Diploma in engineering or equivalent field.
• Registered WSHO (MOM) with at least 3 years of post-registration and practical experience
• Knowledge on manufacturing processes will be an advantage
• Ability to use relevant Microsoft applications for report writing, documents updates, analysis and develop presentation slides for EHS related contents
• Be dynamic, self-motivated, proactive and results-orientated
• Excellent team spirit, strong technical competence and good interpersonal skills

ROLES AND RESPONSIBILITIES

• Develops project objectives by reviewing project proposals and plans; conferring with management.
• Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Confirms product performance by designing and conducting tests.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.
• Controls project costs by approving expenditures; administering contractor contracts.
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.
• Maintains project data base by writing computer programs; entering and backing up data.
• Maintains product and company reputation by complying with federal and state regulations.
• Contributes to team effort by accomplishing related results as needed.

REQUIREMENTS

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Environmental/Health/Safety) or any related field
• At least 3 Year(s) of working experience in the related field is required for this position.
• Possess keen knowledge of water and wastewater treatment technologies and the industry in general
• Able to work independently and a multitasker/ able to cope in a fast-paced environment.

CLASS 4 DRIVERS

Driver Responsibilities

1. Deliveries of goods to client premises

2. Conduct inspection of the vehicle before departing to deliver goods

3. Loading, transporting and delivering items to clients or businesses in a safe and timely manner

4. Ensure daily delivery fulfilment

5. Assisting with loading and unloading items from vehicles

6. Responsible for the clean linessand working condition of company'svehicle

7. Any other ad-hoc duties assigned

Knowledge and relevant experience

• Possess valid Singapore Class4License (Experience in driving a truck for more than 3years)
• Willingness to adhere to assigned routes,schedules, safety procedures,and transportation laws
• Strong time management and customer service skills
• Attention to detail
• Represent the company in a professional manner
• Possess good attitude and polite

Qualifications to apply for job

• High school or diploma or other technical certificates, such as courses for qualified technicians or specialists is preferred.
• Valid class 4 driving license. Cleandriving record.
• Sound knowledge of road safetyregulations.
• Working knowledge of local roads and routes
• The ability to utilize maps, GPSsystems,and car manuals.
• Effectivecommunicationskills.Punctual andreliable.
• Providing accurate time records ofthecompany vehicle’s coming andgoings.
• Reporting any accidents, injuries,andvehicle damage to management

Role Overview
The Operations Assistant supports the Operations Manager to ensures smooth operations by handling worker passes, safety training, PPE distribution, timecard collection, and other operational tasks.

Key Responsibilities

• Worker Logistics: Assist in planning and coordinating transportation for workers to and from job sites.
• Pass & Safety Compliance: Record, track, and apply for worker passes (e.g., Jurong Island Pass, safety passes) before they expire. Ensure workers meet mandatory training and certification requirements, keep records updated for compliance audits.
• PPE Management: Maintain inventory of PPE and distribute it to workers as needed.
  Ensure PPE records are up-to-date.
• Timecard & Timesheet Management: Collect and review timecards/timesheets from workers at month-end. Ensure records are accurate before submitting to the Accounts department.
• Training Coordination: Monitor workers' mandatory training and enroll them in required courses.
• General Support: Assist the Operations Manager with ad-hoc tasks related to daily operations.
  

Other Requirements: Ability to work in a fast-paced environment and handle multiple tasks.

WE are looking electrical and mechanical engineer need 4 pax experience excel word autocad speak english and need to submit Progress cliem and site servay co-ordinate with site supervisor and client arrange transportation for each project and monitor all th email and latters every week site meeting with client

Job Description & Requirements

· Able to plan, schedule and forecast procurement activities

· Purchase general and specialized equipment and materials for projects

· Review plans, specifications, and contracts to ensure the correct equipment, material and subcontractor services are ordered and/or purchased

· Consult with suppliers and review quotations

· Determine or negotiate contract terms and conditions, award supplier contracts or recommend contract awards

· Work closely with site personnel

· Ensure lorry drivers' have meet the timelines given.

· Address and resolve issues related to transportation and logistics system.

· Generate Purchase Orders promptly.

· Maintain good relationship and follow-up with suppliers closely.

· Provide administrative support to the office.