Job Requirements

• Leading a Team of Tankage Design Engineers to execute the Tankage Design Engineering of the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650, Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII & Cryogenic Double Wall Tanks as per API 620 & API 625.
• Review & Checking of Tankage Design Documents such as Design Calculation for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification, Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME Sec VIII, AP 2000 and all Applicable Codes & Standards.
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies.
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay / approvals / resolution of open issues.
• Review and ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Coordination with PMC and Construction Coordination.
• Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works.
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Preparation of Technical Specification for Works and Technical Bid Evaluation
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Preparation of Foundation Loading Data.
• Generate 2D construction drawings and data sheet.
• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system, aluminium dome roof & etc. Preparing technical bid evaluation for item purchased. Checking vendor’s calculation & construction drawings.
• Checking of construction drawings. Preparation of bill of material for purchasing.
• Preparation of technical queries to client base on design deviation.
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Minimum 15 years of experience

Software Requirements

1) Autocad

2) Good proficiency in MS Excel, MS word

Code Knowledge

1) API 650/ API 620

2) ASME Section VIII D1 & D2

3) ASME Section II Part A & D

4) ASTM

5) NFPA

• Assisting in the recruitment and onboarding of new hires
• Ensuring compliance with safety and professional standards within a facility
• Organizing, monitoring, and prioritizing tasks to meet production goals
• Evaluating various stations of the production operation to ensure optimum efficiency
• Maintaining communication between employees and senior executives to ensure procedures and policies are well-understood
• Ensuring the flow of raw materials and other resources.
• Supervising operations within a facility to achieve higher output.

Production Engineer Responsibilities:

• Supervising the manufacturing processes, ensuring quality work is done in a safe, efficient manner.
• Liaising with other engineers to develop plans that improve production, costs, and labor required.
• Diagnosing problems in the production line and providing recommendations and training.
• Establishing safety procedures and protocols that take the workers' well-being into account, and that also minimize the carbon footprint.
• Keeping abreast of advancements in engineering and production, and sharing knowledge with co-workers.
• Identifying, documenting, and reporting unsafe practices.
• Drawing up production schedules and budgets for projects.
• Scheduling meetings with relevant departments and stakeholders.
• Analyzing all facets of production and making recommendations for improvement.
• Obtaining any materials and equipment required.

• Location: Tuas
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities :

• Prepare group consolidation, financial report and financial analysis.
• Prepare and submit of consolidated monthly financial reports.
• Oversee the accounts of subsidiaries companies within the Group to ensure timely monthly closing and reporting.
• Statistics / survey preparation and submission
• Provide accounting advice to colleagues and associate companies to ensure common application of accounting guideline, policies and procedures.
• Handle subsidiaries/associate companies in forecast reporting and in their management accounts process. Liaise with external auditors in annual financial audit and statutory reporting for the Group.
• Prepare Group’s annual budget and quarterly rolling forecast.
• Assist Accounts Dept in ad-hoc tasks as may be assigned.
• Review and approve WIP
• Analyse, prepare, explain, and submit Flash report to Directors/Shareholders
• Liaising with all auditors and tax agents

Requirements :-

• Degree/Diploma in Accountancy or equivalent professional qualification
• 5 years accounting experience
• Ability to work independently with minimum supervision

*Only shortlisted candidates would be notified**

You are assisting the in-house IT Engineer in managing and resolving the day-to-day IT requests from employees. These tasks may include, but are not limited to the responsibilities as follow:

Responsibilities:

· Installing and configuring computer hardware, software, systems, networks, printers and scanners.

· Maintain and monitor the list of e-mail address in the company.

· Create login credential and the access rights to the new employees and deactivate all the access when employees leave the company.

· Ensure the security of data, network access and backup systems are kept up to date.

· Providing technical support across the company, including repairing and replacing equipment when necessary.

· Manage and update IT infrastructure list for the whole company.

· Raise Purchase requisition by identifying and selecting the appropriate equipment that align with the requirements of management.

· Support overseas office user from remote connection.

· Any other ad-hoc duties as assigned by IT lead/Management.

Requirements:

· Only Singaporeans may apply

· Part-timers are welcome

· Diploma or Degree holder with 2-3 years of relevant working experience.

· Extensive knowledge of computer hardware systems

· Familiarity with general OS systems, Enterprise, programming languages, and Office software

· Knowledge of LAN and wireless networks

· Good communication skills

· Ability to troubleshoot complex software and hardware issues

· Knowledge of database and networking security systems

Must have prior knowledge about singapore manpower rules and regulations, should posses all certification on date

ability to handle foriegn workers

must be fluent in foriegn langugages to communicate with the workers

must be required to do adhoc jobs when needed

Responsibilities:

• Supervise/perform fault diagnosis, trouble shooting and maintenance of power system/component in workshops and onboard vessels
• Liaise with various departments within company and client to expedite the scope of work
• Lead a team of electricians in corrective and preventive maintenance
• Prepare work completion reports for Customer’s Acceptance.
• Perform maintenance works in accordance with vessel safety requirement
• Conduct in-depth troubleshooting of electrical connections and Programmable Logic Controllers (PLC) programs.
• Coordinate with vendors and partners, conduct design reviews with customers, and maintain documentation according to our ISO quality systems.

Requirements:

• Diploma in Electrical Engineering
• 2-5 years of relevant experience in the Marine related or Oil & Gas industry
• Candidate with no experience may apply
• Experienced dealing with 440V Main switchboard, Distribution Boards, Transformer, Power Generator, Main Engine, Converter, Inverter Batteries, Fire alarm & flooding system and Ship Control Monitoring & Management System
• Experience in troubleshooting on various brands of PLCs (Panasonic, Omron, Allen Bradley, Siemens, Mitsubishi, ABB, etc.) is advantageous
• Proficient in selection and integration of sensors, pneumatic systems, Stepper and Servo Motors & control systems, Power Supply Units, other electrical hard wares, etc.
• Possess man management experience in leading up to 6 men, including Supervisors and Technicians
• Willing to work as a team player to achieve assigned task within given timeline.
• Comfortable with report writing
• Able to work onboard vessels and at heights

• Other Information:
  Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

• Location: Tuas
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities :

• Prepare group consolidation, financial report and financial analysis.
• Prepare and submit of consolidated monthly financial reports.
• Oversee the accounts of subsidiaries companies within the Group to ensure timely monthly closing and reporting.
• Statistics / survey preparation and submission
• Provide accounting advice to colleagues and associate companies to ensure common application of accounting guideline, policies and procedures.
• Handle subsidiaries/associate companies in forecast reporting and in their management accounts process. Liaise with external auditors in annual financial audit and statutory reporting for the Group.
• Prepare Group’s annual budget and quarterly rolling forecast.
• Assist Accounts Dept in ad-hoc tasks as may be assigned.
• Review and approve WIP
• Analyse, prepare, explain, and submit Flash report to Directors/Shareholders
• Liaising with all auditors and tax agents

Requirements :-

• Degree/Diploma in Accountancy or equivalent professional qualification
• Minimum 5 years working experience in accounting, audit and/or handling group consolidation.
• Experience in ERP system implementation is a plus.
• Worked in accounting firm wuth an audit background is a plus.
• Ability to work independently with minimum supervision

*Only shortlisted candidates would be notified**

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

• 
  
• Dealing with email enquiries
• General office management such as ordering stationary
• Organising travel and accommodation for staff and workers
• Possibly maintaining the company accounts
• Managing the recruitment and work pass process, insurances, dormitory arrangement.
• Ensure timely preparation and accuracy of monthly payroll, CPF submission and Income Tax clearance
• Support current and future business needs, ensure legal compliance throughout manpower management
• Work closely with the General Manager to monitor day to day businesses and able to handle tasks assigned by the GM.

• Prepare and sort documents, keep record of completed work
• Provided routine office supports such as making copies, faxing, answering phones, prepares correspondence for mailing delivering and picking up correspondence.
• Update and maintain employee and department directories
• Respond to clients’ inquiries in a timely and professional manner
• Ordering of pantry and stationery supplies
• Handle enquiries
• To cover Receptionist duties as when required
• Any other ad hoc duties assigned

• Cooling Equipment, Chiller
• Basic up to $5000
• High Variable bonus + Mobile Allowance + Other Allowance
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities:

• Oversee and manage the projects assigned to ensure on track as per requirement
• Work closely with customers, engineers and contractors to assess equipment needs, and to determine system requirements.
• Prepare project document, drawing submissions and support other team members in execution and coordination
• Attend meeting with customer, team members and contractors where required
• Coordinate and schedule submission, delivery and T&C schedule with clients and contractors
• Performing quality control tasks on equipment, budgets, schedules, plans, and personnel performance and reporting on the project's status
• Ensuring the project's compliance with the applicable codes, safety practices, policies, performance standards, and specifications.
• Perform site survey to ensure that equipment is delivered and installed in proper manner as per requirement
• Perform and lead the T&C of equipment as per the timeline provided by clients
• Troubleshooting of equipment with RCA reports where required

Requirements:

• Diploma / Degree in Mechanical/Electrical Engineering or related field
• Flexibility to travel at any given time
• Prefer candidate with Class 3 driving license.

*Only shortlisted candidates would be notified**

• Plan and coordinate administrative procedures and systems and devise ways to streamline processes
• Recruit and train personnel and allocate responsibilities and office space
• Assess staff performance and provide coaching and guidance to ensure maximum efficiency
• Ensure the smooth and adequate flow of information within the company to facilitate other business operations
• Manage schedules and deadlines
• Monitor inventory of office supplies and the purchasing of new material with attention to budgetary constraints
• Monitor costs and expenses to assist in budget preparation
• Oversee facilities services, maintenance activities and tradespersons (e.g electricians)
• Organize and supervise other office activities (recycling, renovations, event planning etc.)
• Ensure operations adhere to policies and regulations

Position: Project Engineer

Job Highlights

· 5.5 Days Work Week

· Familiar In Steel Structure

· To supervise and manage all related matters with regard to the day to day civil activities on the project with the objective of meeting the schedule quality and safety objectives .

· To ensure all works are carried out in line with SCDF health and safety standards in order to provide high quality works in safe and efficient manner.

· Drafting using Tekla and Auto Cad

Job Requirements

· Good communication skills

· Conduct regular site visits to ensure compliance with contract specifications and design plans

· Project Planning , coordination and supervision of technical aspects of construction projects

· Conduct joint inspection with RE and RTO

· To assist the Project Manager in the daily execution of work.

· Attend Meeting if necessary

· Arrange Heavy Equiptment /transportation if necessary

· Provide weekly update to the Project /Site Manager

· Able to plan/coordinate site works and resolve drawing details and discrepancies

· Tendering & Proposal

· Ad-hoc assignment as required by the management

Qualifications and Experience

· Minimum with 3 years of experience at construction sites

· Pre-planed prepare construction schedule ,coordinate activities

· Candidate must possess at least , Bachelor’s Degree / Professional Degree , Master’s Degree in any field

· Liaise with both internal and external parties for efficiency

· Other ad-hoc duties as assigned by Project Manager

· Prefer knowledge in Tekla , Auto CAD

· NOT for BIM Modeller Application

·

Roles & Responsibilities:

To ensure the smooth operation of site activities

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

To coordinate with sub-contractors and attend to clients' queries to ensure timely work arrangements

To be involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standard

To manage project documentation and maintain accurate records

Ensure compliance with all health and safety regulations

Requirements:

Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification

Experience / Knowledge in in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA will be an added advantage

More than 3 years of site experience in the construction sector, preferably in the superstructure crosshead/ precast segmental bridge and Launching Gantry operation or similar

Good team player and able to work independently

BCSS Certification

Job Description:

· Responsible for full spectrum of payroll function

· Process payroll via Info Tech Payroll system

· Prepare and maintain and maintain employee payroll records

· Preparation and submission of Form IR21, IR8A, IR8S, Appendix 8A and Appendix 8B

· Filing of all government paid leave and claims

· Handle and assist staff queries on benefit and payroll matters

· To undertake other HR functions, ad hoc projects and other duties as and when assigned

Job Requirement:

· Familiar with Employment, CPF/Foreign workers Levy Acts

· Diploma in Admin/HRM

· At least 2 years relevant experience, handling large headcounts

· Independent, hands-on individual with strong time management skills

· Proficient in MS Excel

Roles & Responsibilities:

Involved in all aspects relating to the design and construction management of all types of civil and structural system

To lead the engineering team, carry out civil and structural engineering jobs in front end engineering design, detail engineering design

To generate project specification, design philosophy, calculation template to comply with clients’ requirements and the local authority’s requirements

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

Coordinate with sub-contractors and attend to clients' queries to ensure timely work arrangements

Involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standards

To manage project documentation and maintain accurate records

To ensure compliance with all health and safety regulations

Requirements:

Bachelor Degree in Civil Engineering/Building Construction or any equivalent qualification

Site experience on Super structure works for reinforce concrete, Steel structures and Precast structures

Experience / Knowledge in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA will be an added advantage

Minimum 5 years of relevant working experience in local construction industry will be an added advantage

Good team player and able to work independently

BCSS Certification

Familiar with the local authorities’ requirements for civil and structural submissions

Possesses strong leadership qualities and analytical and reasoning abilities

Possesses the ability to read, analyses, and interpret common technical information, contracts reports and instructions

To manage and coordinate the production of quality shop drawings and BIM models in all projects assigned with minimal supervision. He/ She must be able to carry out HVAC/piping-related drawings.

• To produce 2D drawings from BIM models with accuracy ensuring drawings produced are according to the Project or the Client’s Drafting Standards and Procedures, and that the drawing submission schedule is achieved.
• Maintain proper records of all issued & received models/drawings, Clash Reports, RFIs, etc.
• BIM Register following the company’s ISO Standards and Procedures and ensuring all the drawings are completed on schedule or promptly.
• Perform regular drawing backups and housekeeping work in the directory
• The secondary role includes developing technical plans, sections, details, and 2D/3D schematic diagrams using AutoCAD and in-house software.
• Accountable for the fluent/organized presentation, content correctness/accuracy of shop drawings production in form, fit, and function through thorough coordinates with other trades and services in 2D/ 3D submission.
• Responsible for ensuring full compliance with the company’s Shop Drawings Standard Operation Procedure, including adherence to design provision/scope of work according to contractual obligations.
• Generate a clash report based on the Matrix provided
• Work under the supervision of the Project Manager and perform the work tasks assigned.

Experience / Skills

• Degree/ Diploma in Mechanical Engineering or other relevant disciplines.
• Preferably with a minimum of 2 years of working experience in space planning, and design coordination, preferably on different scales of projects within engineering design consulting business.
• Having good knowledge of software such as Revit, and AutoCAD.
• Knowledge in Isometric drawings, LOD 350, and Plant 3D will be added advantages
• Good planning skills in managing modeling and drafting work.
• Possess strong initiative, and ability to work independently and within a team environment when required.
• Good interpersonal, written and verbal communication skills.

We regret that only shortlisted candidates will be notified.

Responsibilities:

Quality Assurance

• Quality Assurance Plan -Overview of QMS.
• Leads, directs a team of Engineers for routine task of QA surveillance, onsite inspection /test and documentation.
• Establish Acceptance Test plan as per CTS & Class.
• Establish FAT plan and review of FAT Supplier's Protocols
• Review and advise the development of HAT test protocols according to the Approved ATP.
• Review of Internal Test records
• Review of Platform Acceptance Test protocols
• Update the status report on FAT, HAT & PAT in the progress meeting
• Manage the deliverable documents

Commissioning of Shipboard Machinery System/Electrical & Automation System and Equipment

• Leads, directs and supervise a team of engineers in preparation of commissioning of shipboard equipment's ensuring the entire responsibility for the completion on schedule in accordance to the protocols.
• Establish and continuous monitoring of Commissioning/ HAT Plan, based on master project schedule.
• Manage resource planning and technical advice for the QA commissioning Team.
• Manage work safety, assigned jobs, risk assessment and productivity of the Commission Team and manage the commissioning job scope with supplier/ OEM within budgeted Man Hours
• Oversees and ensures all construction activities are completed prior to taking up the system for commissioning.
• Prepares manpower organization to fulfill the commissioning schedule. At times to coordinate with other departments to resolve interface problems
• Deploy and assign jobs and expectation to his engineers and supervisors
• Holds regular meetings with the team and other departments in the commissioning progress/issues affecting the test as well as meetings with the vendors to resolve any equipment related problems.
• Set productivity targets for his team, assess, identify and manage training needs for his team
• Plan department man power projections, and manage shortfall or excess resources.
• Manage departmental improvement and processes to improve quality of work.
• Manage & Monitor departmental safety work plan and review departmental BBS and hazard reporting program.
• Manage E-Ops Team for Sea Trial
• Perform safety audits on departmental safety practices and employees.

Requirements:

• Diploma or Degree in Marine, Electrical or Electronic Engineering
• Minimum 7 to 10 years relevant experience in marine related industry
• Track record of managing a team of engineers and workers
• Knowledge of Class requirements and Quality Standards
• Good knowledge and onboard exposure for ship and machinery system/electrical & automation system operation and upkeep
• Experience in managing marine system/electrical & automation system engineering commissioning and services support department
• Possess Shipboard & Sea Going/Sea Trial Experience
• Resourceful and able to adapt to changes on short notice
• Ability to continuously review current jobs and inject new ideas to improve work methods
• Able to work under pressure
• Able to work onboard vessels and at heights

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Job Purpose:

Service engineer to carry out preventive and corrective maintenance of machinery, industrial vehicles, heavy machinery and waste collection equipment.

Opportunity to develop as a professional within heavy duty machinery sector through continuous training programmes to ensure the necessary technical and skills.

Main Duties and Responsibilities:

• Preparation of necessary material and stock control
• Diagnosis of breakdowns, either electric, mechanic or hydraulic.
• Interpretation of electrical and hydraulic diagrams to apply correct solutions
• Inspection and repair of electrical, mechanical and hydraulic breakdowns and analyze possible malfunctions of machinery.
• Preparation of needs of materials and stock control

Accountabilities & Commitments Required

• Able to attend breakdowns after office hours and weekends
• Commitment to join a growing company and take full responsibility to be part of a team

Education / Qualifications

• Technical education
• Fluent in English
• Other laguanges

Job-related skills & abilities

• Class 3 driving licence
• Analytical Skills for problem-solving

Other requirements

• Customer Satisfaction, Aftersales, and Customer Service skills
• Previous experience in a similar role in the waste management industry will be a plus point

Purpose Statement:

• Ensures reliability and mechanical integrity of equipment for processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance.
• Develops engineering solutions for repetitive failures and all other problems that adversely affect plant operations including capacity, quality, cost or regulatory compliance issues.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items

Major Responsibilities:

• Ensures reliability and maintainability of equipment, processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance
• Lead and drive mechanical integrity program in compliance with regulations
• Take a lead to troubleshoot equipment reliability issues and carryout RCFA for the repeated failures and failures that has an impact to production, quality and safety.
• Lead RCM studies for critical assets/systems and implement the action items generated.
• Run online/offline condition monitoring program site wide.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items.
• Works with project engineering teams to ensure reliability/ maintainability of new/modified installations.
• Perform analysis of asset performance including: Asset utilization, Overall equipment effectiveness, remaining useful life and capital replacement plans as well as other parameters that define Site MEP KPIs such as availability, maintenance performance, reliability and R&M costs of assets.
• Develop SOPs, equipment job aids, checklist to assure no equipment reliability issue after repair work.
• Evaluate content of maintenance plans in CMMS including methods, maintenance frequencies and spare parts needed

Qualifications:

Education

• A bachelor’s degree or a diploma in Mechanical engineering discipline.

Experience

• Mechanical engineering degree with at least 5 years work experience or a diploma with a minimum of 15 years of relevant work experience in pharmaceutical/ biological/ chemical/ oil & gas industries.
• Experience driving RCM studies and RCFA
• Experience/Knowledge in Asset Integrity Management
• Sound technical knowledge coupled with hands-on experience in maintenance of processing equipment

Skills

• Comfortable working in a team and matrix environments with high degree of initiative and self-motivation
• Scientific approach to solving problems and makes data-based decisions.
• Keen in driving and adopting new technologies.
• Knowledge of CMMS, Reliability, and proficiency in MS Office products (Excel, Outlook, PowerPoint, Word, Project)
• Knowledge on vibration analysis, RCM and RBI
• API 510/570/580 certification will be an added advantage
• Good written and oral communication skills
• Interpersonal skills and a "hands-on" attitude
• cGMP experience is a plus

• Drive annual revenue growth by securing multiple significant agreements with new brands across Asia.
• Develop and implement aggressive growth strategies to meet ambitious revenue goals.
• Spearhead business development efforts, identifying new opportunities with both existing and prospective clients.
• Engage with and manage client relationships at various levels, including C-suite executives.
• Negotiate terms for new engagements and renewals.
• Collaborate with the Client Services & Rewards team to achieve project objectives.
• Cultivate and expand relationships with current clients.
• Assist the Managing Director, in forming strategic alliances and partnerships.

An established M & E company supplying engineering equipment is looking for a suitably qualified and experienced individual to join its team based at its Tuas office as Sales Coordinator.

Job Duties

• Attend to sales queries and prepare quotations
• Assist to generate sales documents like DOs and POs etc
• Assist with data compilation and other sales support related work.
• Provide general administrative support.

Requirements

• Preferably have some technical background but not necessary.
• Detailed oriented
• Organised
• Must be willing to work in Tuas (Nearest MRT station: Gul Circle)
• Good time management skills to meet deadlines.
• Excellent oral, written communication and interpersonal skills
• Proficient in Microsoft Office

To apply, please click on the "Apply Now" button to submit your detailed resume stating:

a. Current and expected salary

b. Reason(s) for leaving

c. Availability to start work

All applications will be treated with strict confidentiality and only shortlisted applicants will be notified.

• Reviewing construction plans and preparing quantity requirements.
• Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.
• Liaising with site managers, clients, contractors, and subcontractors.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Advising managers and clients on improvements and new strategies.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Traveling from the office to various sites as required.

• Ensuring vehicles are mechanically sound and legally roadworthy
• Performing basic repairs and maintenance in the event of accident or breakdown while in transit
• Safely securing heavy loads and large goods for transport
• Organising the most efficient route from pickup point to drop off point
• Keeping informed of road closures, accidents and traffic diversions
• Organising multiple drop-offs and deliveries in each working day
• Supervising and assisting with the loading and unloading of deliveries into the lorry
• Updating vehicle log books, recording deliveries and tracking mileage