Position Summary

Independently to develop and apply Electrical & Automation design and knowhow on marine and offshore vessel to comply with Class and Technical specification requirements.

Tasks and Responsibilities

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting

Job Requirement

• Minimum 3-5 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux and etc.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Know how to operate and draw in AutoCAD.
• Have knowledge in basic fire and gas detection.
• Have knowledge in basic HVAC electrical and instrumentation.
• Must know how to operate MS office (minimum Word and Excel).
• Minimum Diploma/Degree in Engineering or related field

• Location: Tuas
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities :

• Prepare group consolidation, financial report and financial analysis.
• Prepare and submit of consolidated monthly financial reports.
• Oversee the accounts of subsidiaries companies within the Group to ensure timely monthly closing and reporting.
• Statistics / survey preparation and submission
• Provide accounting advice to colleagues and associate companies to ensure common application of accounting guideline, policies and procedures.
• Handle subsidiaries/associate companies in forecast reporting and in their management accounts process. Liaise with external auditors in annual financial audit and statutory reporting for the Group.
• Prepare Group’s annual budget and quarterly rolling forecast.
• Assist Accounts Dept in ad-hoc tasks as may be assigned.
• Review and approve WIP
• Analyse, prepare, explain, and submit Flash report to Directors/Shareholders
• Liaising with all auditors and tax agents

Requirements :-

• Degree/Diploma in Accountancy or equivalent professional qualification
• Minimum 5 years working experience in accounting, audit and/or handling group consolidation.
• Experience in ERP system implementation is a plus.
• Worked in accounting firm with an audit background is a plus.
• Ability to work independently with minimum supervision

*Only shortlisted candidates would be notified**

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

· Prepares and submit shop drawings / As Built Drawings.

· Attend all coordination meeting regards to technical issues.

· To support Marketing, QS / Project Departments in technical enquiries.

· Able to manage the process from sample submission, production such as cutting list or fabrication drawings etc.

· Able to manage & liaise with sub-contractors, Main-contractors and client’s engineers.

· Project filing or drawings in Soft Copy and Hard Copy is required

· Create any freehand drawings / sketches to initiate preliminary drawings, including of cutting list

· Studies and examines drawings and specification of tender requirement.

· To attend on going site meeting and liaise with contractors, suppliers and clients to meet the requirements of the ongoing tender/project works

· To oversee the design department and give support to junior drafter

· Any other tasks assigned by superior

Job Description:

- Oversee the configuration management process for all systems within the organization.

- Ensure that all configurations are documented, maintained, and updated as necessary.

- Implement and manage automation tools to enhance the efficiency and accuracy of configuration monitoring.

- Monitor and manage the configuration of various systems to ensure they meet organizational standards and requirements.

- Maintain accurate records of system configurations and changes.

- Identify and implement automation tools and processes to streamline configuration monitoring.

- Ensure automated monitoring systems are functioning correctly and efficiently.

- Oversee the monitoring of raw materials to ensure they meet quality and compliance standards.

- Handle the requirements for end-user certificates related to raw materials, ensuring compliance with regulatory and organizational policies.

- Liaise with relevant stakeholders to obtain and verify necessary documentation.

- Handle the requirements for end-user certificates, ensuring compliance with regulatory and organizational policies.

- Liaise with relevant stakeholders to obtain and verify necessary documentation.

Job Requirements:

- Degree in any engineering fields

- Proven experience in configuration management is preferred.

- Understanding of raw material monitoring and compliance.

- Experience with automation tools and processes is preferred.

- Excellent organizational and communication skills.

Job Description:

- Operate CNC machines to perform tasks.

- Set machines to complete full cycles to fabricate parts.

- Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result.

- Prepare a test run to check if the machines produce outputs according to specifications.

- Prepare and load raw materials and parts onto the machines.

- Understand specifications of the task at hand and the desired result.

- Check and maintain and upkeep machinery daily to ensure functionality.

- Uphold good housekeeping.

Job Requirements:

- Nitec/ Higher Nitec in Precision Machining/ Mechanical Technology or equivalent.

- Good communication skills.

- Able to work as a team.

- Good CNC programming knowledge.

- Able to read and interpret technical drawings.

- Good technical knowledge on various machining and tooling techniques.

- Able to work efficiently and independently.

Young and research-intensive, Nanyang Technological University, Singapore (NTU Singapore) is ranked among the world’s top universities. NTU’s College of Computing and Data Science (CCDS) is a leading college that is known for its excellent curriculum, outstanding and impactful research, and world-renowned faculty. Today, we are ranked #2 for AI and Computer Science by US News Best Global Universities; and #8 for Data Science and AI by QS World University Ranking.

A hot bed of cutting-edge technology and groundbreaking research, the College aims to groom the next generation of leaders, thinkers, and innovators to thrive in the digital age. Located in the heart of Asia, NTU’s College of Computing and Data Science is an ‘exciting lace to learn and grow'. We welcome you to join our community of faculty, students and alumni who are shaping the future of AI, Data Science and Computing.

The College of Computing & Data Science (CCDS) invites applications for the position of Research Assistant.

Key Responsibilities:

• Conduct research on differential privacy algorithms with applications in computational processes.
• Develop innovative ideas to enhance existing algorithms and frameworks.
• Collaborate on applying privacy-preserving algorithms to machine learning models.
• Analyse and interpret findings, ensuring scientific rigour and practical relevance.
• Prepare and submit manuscripts to leading conferences and journals such as S&P, USENIX, SIGMOD, VLDB, TODS, NeurIPS, ICML, AAAI, or ICLR.

Job Requirements:

• Preferably, a Bachelor's degree in Computer Engineering, Computer Science, Electronics Engineering, or an equivalent field from a top-tier university, with an outstanding academic record (First-Class Degree or ranking top in the class).
• Familiarity with differential privacy is required, along with a strong foundation in mathematical training and proficient algorithm implementation programming skills.
• Independent, highly analytical, proactive and a team player
• Excellent teamwork and verbal, written communication skills
• Proven research ability as evidenced through a portfolio of publications and/or conference papers and/or patents.
• In-depth knowledge relevant to the project domain.
• Demonstrated capability to conduct innovative research.
• The ability and willingness to adapt and incorporate novel ideas and approaches in scientific industry.
• Ability to design and implement new experimental methods.
• High-level expertise in the required experiment or modelling methods.
• Ability to initiate collaboration research in multidisciplinary team.
• Oversee and report project progress.

We regret that only shortlisted candidates will be notified.

Young and research-intensive, Nanyang Technological University, Singapore (NTU Singapore) is ranked among the world’s top universities. NTU’s College of Computing and Data Science (CCDS) is a leading college that is known for its excellent curriculum, outstanding and impactful research, and world-renowned faculty. Today, we are ranked #2 for AI and Computer Science by US News Best Global Universities; and #8 for Data Science and AI by QS World University Ranking.

A hot bed of cutting-edge technology and groundbreaking research, the College aims to groom the next generation of leaders, thinkers, and innovators to thrive in the digital age. Located in the heart of Asia, NTU’s College of Computing and Data Science is an ‘exciting lace to learn and grow'. We welcome you to join our community of faculty, students and alumni who are shaping the future of AI, Data Science and Computing.

The College of Computing & Data Science (CCDS) invites applications for the position of Research Associate.

Key Responsibilities:

• Conduct research on differential privacy algorithms with applications in computational processes.
• Develop innovative ideas to enhance existing algorithms and frameworks.
• Collaborate on applying privacy-preserving algorithms to machine learning models.
• Analyse and interpret findings, ensuring scientific rigour and practical relevance.
• Prepare and submit manuscripts to leading conferences and journals such as S&P, USENIX, SIGMOD, VLDB, TODS, NeurIPS, ICML, AAAI, or ICLR.

Job Requirements:

• Preferably, a Master's degree in Computer Engineering, Computer Science, Electronics Engineering, or an equivalent field from a top-tier university, with an outstanding academic record (First-Class Degree or ranking top in the class).
• Familiarity with differential privacy is required, along with a strong foundation in mathematical training and proficient algorithm implementation programming skills.
• Independent, highly analytical, proactive and a team player
• Excellent teamwork and verbal, written communication skills
• Proven research ability as evidenced through a portfolio of publications and/or conference papers and/or patents.
• In-depth knowledge relevant to the project domain.
• Demonstrated capability to conduct innovative research.
• The ability and willingness to adapt and incorporate novel ideas and approaches in scientific industry.
• Ability to design and implement new experimental methods.
• High-level expertise in the required experiment or modelling methods.
• Ability to initiate collaboration research in multidisciplinary team.
• Oversee and report project progress.

We regret that only shortlisted candidates will be notified.

• Assemble and install mechanical systems for industrial, electromedical, and manufacturing purposes Implement cost-effective changes in equipment design to improve reliability and safety
• Assist mechanical engineers in developing, building and maintaining machines and tools
• Read and interpret engineering designs, plans, and diagrams for piping, transmission, and HVAC systems Prepare cost and material estimates for a project
• Test and analyze machines, tools, and components to determine their performance, strength and response to stress
• Design manufacturing implements such as jigs, dies, and moulds
• Carry out inspections to identify faults and initiate repair of mechanical systems or products
• Monitor mechanical processes to ensure conformance to standard project procedures Use CAD software and technology to prepare drawing plans and design for an engineering project
• Assemble components or machine parts to form integral or complete product unit
• Provide technical solutions to mechanical problems found in a variety of industries
• Develop and design prototypes of equipment
• Ensure compliance with health/safety procedures and regulations
• Implement quality control systems useful in evaluating and testing mechanical processes/product for consistency.
• Liase with various departments to completed the job.
• Report to Management Level

Requirements

Degree in Engineering Mechanical Engineering

Working Location : Jurong West

Working days : Monday - Friday (5 Days)

Shift Work required ( Rotation work at Saturday & Sunday)

Require to work at Night Shift

Roles & Responsibilities

Working under the Project Manger to complete the project on time, which include: -

1. Check and monitoring of site progress and resolving of site issues with clients
2. Follow up with factory for production order, delivery schedule, etc
3. Update QS on progressive claim, variation order, etc
4. Ability to work effectively both independently and as part of a team
5. Advantage if with experience using computers.
6. Willing to start work at 7 am as per project requirement
7. Willing to do overtime and work weekends on a regular basis
8. Foster positive communications and relationships with vendors, clients & Team members MOSTLY Foreign Workers.
9. Willing to Be hands on when needed for the work porgress.
10. Wiling to be exposed to exposed weather due to site requirement.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Job Title: Project Engineer

Occupation: Mechanical Engineer / Fire Protection Engineer

Industry: Industrial Pump Supply

Job Highlights

• 5 Days Work Week
• Attractive Employee Benefits
• Guaranteed 1-Month Bonus + Attractive Sales Incentive
• Work-Life Balance
• Ample Opportunities for Growth

Job Description

We are seeking a dedicated Project Engineer to support our growing team.

As a key player in the company, you will:

• Support the Project Team in pump selection, quotations, technical documentation, and drawings
• Follow up with customers and suppliers on inquiries and orders
• Liaise with customers, suppliers, and internal departments to ensure project deadlines are met
• Initiate and request orders for required project supplies
• Coordinate project timelines and resources

Requirements

To be successful in this role, candidates should have:

• A minimum of a Diploma in Mechanical Engineering or a relevant field
• Project coordination experience
• Strong critical thinking and time management skills
• Ability to work independently in a fast-paced environment
• Analytical, detailed-oriented, flexible, and dynamic mindset
• Strong written and verbal communication skills
• 2D AutoCAD skills are essential (Good AutoCAD skills are an advantage)
• A Class 3 Driving License is preferred but not mandatory

Skills Required

• Project Coordination
• Mechanical Engineering
• AutoCAD (2D)
• Technical Documentation
• Time Management
• Verbal Communication
• Critical Thinking
• Project Management
• Commissioning
• Ability to work independently

Roles & Responsibilities:

To assist in ensuring the smooth operation of site activities

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

To assist in coordinating with sub-contractors and attend to clients' queries to ensure timely work arrangements

To be involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standard

To assist in managing project documentation and maintain accurate records

Ensure compliance with all health and safety regulations

Requirements:

Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification

Experience or knowledge in Bridge Construction/Crosshead/Lifting Frame/Launching Gantry Operation/Pre-cast Segment Method/MRT/LTA will be an advantage

More than 3 years of site experience in the Construction sector, preferably in superstructure crosshead/precast segmental bridge and Launching Gantry operation or similar

Good team player and able to work independently

BCSS certificate

Job Description:

1. Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission

2. Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.

3. Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.

4. Complete work order for each vehicle and unit serviced.

5. Adhere to defined guidelines in regards to safety, orderliness and etc.

6. Performs ad hoc duties as assigned by Superiors

Job Requirements:

1. Academic qualification: NTC 2 / Diploma Automotive Technology or equivalent

2. Competent in basic English (verbal & written)

3. Prefers candidates with at least class 3 driving license

4. Prior experience of at least 2 to 3 years in performing automotive service repair (commercial vehicle)

Job Title

Engineer

Occupation

ENGINEER

Job Description & Requirements

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

About Mun Siong Engineering Limited

One of Singapore’s leading integrated service providers since 1969, Mun Siong Engineering Limited offers a range of mechanical and electrical & instrumentation services for oil & gas, petrochemical, energy, chemicals, and power industries. As a one-stop solution provider, the Mun Siong Group caters for engineering, procurement, fabrication, construction, maintenance of plants and equipment, and specialised products and service solutions.

Job Description

Electrical Instrument Engineers are responsible for designing, configuring, and overseeing automated systems and power distribution projects, focusing on enhancing productivity, reliability, safety, and optimization in industrial facilities, from warehouses to complex EPC contracts, while managing contractors and ensuring system stability.

Responsibilities

• Serve as a knowledge resource for instrumentation, control systems, and process automation.
• Develop and maintain project documentation, including P&IDs, Instrument Index, and I/O Lists, across all project phases.
• Prepare and review engineering calculations, specifications, and requisition packages for inquiry and purchase, ensuring compliance with client standards and project requirements.
• Provide technical direction for material selection, vendor compliance, and equipment specifications; perform technical bid evaluations and make purchase recommendations.
• Coordinate with process engineers, mechanical equipment vendors, and external workshare offices to ensure compliance with project requirements and schedules.
• Plan, design, and oversee the construction, installation, and maintenance of electrical and instrumentation systems, ensuring compliance with codes, standards, and safety requirements.
• Prepare technical and construction scope of work documents for instrumentation, control systems, and electrical systems.
• Conduct inspections, testing, and vendor data reviews to ensure specifications and operational standards are met.
• Utilize computer-assisted engineering and design software to perform tasks and develop deliverables.
• Develop TIC cost estimates, effort-hour estimates, and budgets for labor, materials, and construction costs.
• Oversee project execution, ensuring timely completion within budget while maintaining quality and safety standards.
• Investigate customer complaints and recommend corrective measures; conduct field surveys to identify and resolve system issues.
• Supervise and train project team members as necessary.
• Prepare technical reports, system studies, and budgets for new projects, capital programs, and major repairs

Requirements & Professional Skills

• Diploma/Degree in Electrical Engineering
• Able to read and understand circuit diagrams as well as to detect discrepancies for combined services
• Well-versed in all local and international codes and standards on the related field
• Good knowledge in building M&E services, with project site experience in fire protection and electrical systems for M&E specifications, installation and maintenance.
• Positive attitudes/Drive for result.
• Mature personality and able to work independently.
• Good interpersonal, management and decision-making skills.

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 4-8 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

Responsibilities:

• Assist Engineer in coordinating and supervising maintenance and overhauling jobs
• Prepare Job Acceptance on completion of Jobs
• Monitor and update job status daily.
• Supervise mechanical / diesel / air-conditioning works
• Liaise with customers and contractors on works to be carried out
• Arrange for inspection / job acceptance
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Requirements:

• NTC in Mechanical/Marine/Automotive related field.
• Physically fit with good eyesight
• Possess basic understanding of basic components and functions of mechanical engines or diesel engines
• Able to use IMTE tools such as micrometer, bore gauge and torque wrench
• Able to read simple drawings and service reports
• Possess man management experience for up to 5 technicians
• Willing to work under outdoor environment on site
• Basic working knowledge in MS Word and Excel for status and reporting purpose
• Willing to work in Changi area, with company transport provided

Other Information:

• Location: Changi
• Transport provided at: Jurong West & East, Jalan Bahar, Choa Chu Kang MRT, Bukit Panjang, Woodlands MRT, Bukit Merah, Sengkang, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Perform inspections and tests on electrical and instrumentation systems, including cables, panels, field instruments, and control systems.
• Ensure installations and testing comply with approved drawings, project specifications, and relevant standards
• Prepare and review Inspection and Test Plans (ITPs), Method Statements, and Quality Control procedures.
• Maintain quality records, such as test reports, calibration certificates, and inspection checklists.
• Liaise with construction team, subcontractors, and corporate QMS department to address quality-related issues
• Support commissioning activities by ensuring all quality requirements are met before system handover
• Ensure compliance with industry standards, local regulations, and safety requirements
• Any other duties to be assigned from time to time

Pre-requsities

• Degree/Diploma in Electrical Engineering or related field
• Minimum 5 years of experience in power or industrial plant construction projects
• In-depth knowledge of electrical systems for critical equipments in power plant construction
• Proficiency in inspection and testing of electrical and instrumentation systems
• Effective communication and interpersonal skills for collaboration with multidisciplinary teams
• Commitment to safety and compliance with regulatory requirements
• Project location: Jurong Island (Transport provided at designated pick-up points)

Job Duties and Responsibilities:

• Responsible for trouble shooting and resolving all welding quality and productivity issues through active engagement with the customers and production supervisors
• Develop and draft new welding procedures, including procedure qualification training
• Trouble-shoot and provide support to the Production on all welding quality issues
• Conduct random inspections to ensure that the welding activities carried out conform to the relevant customer specifications, codes and standards
• Directs and coordinates technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with national code requirements; or testing welding personnel for certification
• Contacts personnel of other agencies, engineering personnel, or clients to exchange ideas, information or offer technical advice concerning welding matters
• Perform any other related duties as assigned by Immediate Supervisor

Requirements:

• Diploma/ degree in Metallurgical/ Material/ Mechanical Engineering
• At least 4 years of relevant experience in preparation of WPS, PQR and welders’ qualification
• Knowledge of API, ASME-IX, NACE MR00175 codes and ISO 9001:2015 standard
• Certified Welding Inspector or CSWIP

Job Description

• Provide excellent support experience to customers via all relevant communication channels.

• Ensure effective follow-up with internal and external stakeholders to ensure invoicing closure in accordance to our service standards.

• Provide constructive feedback on tools, resources, procedures and guidelines to enhance workflow and customer experience.

• Prepares the necessary paperwork, such as quotations and delivery orders .

• Follows up on outstanding enquiries, back orders and customers’ payments.

• Liaise with Warehouse for order picking and readiness.

• Assist and liaise with Customers on their Ad hoc requirements.

• Other ad-hoc duties/tasks assigned by superior.

Job Requirement

• Minimum Polytechnic Diploma, or an equivalent qualification

• At least 1 year of experience in sales administration or customer service

• Strong interpersonal skills with the ability to manage multiple tasks in a fast-paced environment

• Proficiency in Microsoft Office applications, particularly Word and Excel

• A team player with a strong work ethic and a proactive attitude

• Ability to work efficiently under pressure and meet deadlines

• Exceptional attention to detail and commitment to accuracy

• Developing and managing marketing technology stacks to ensure seamless execution of campaigns and strategies
• Overseeing and optimizing marketing automation processes to improve workflow efficiencies
• Tracking, analyzing, and reporting on marketing campaign performance to inform strategic decisions
• Managing the marketing budget, ensuring that spending is aligned with strategy and objectives
• Ensuring compliance with data privacy regulations and best practices within marketing operations
• Collaborating with cross-functional teams to align marketing initiatives with sales, product development, and customer service efforts
• Implementing and managing customer relationship management (CRM) systems to enhance customer insights and engagement
• Conducting market research and competitive analysis to stay ahead of industry trends and inform marketing strategies
• Facilitating continuous improvement by identifying and implementing process enhancements within the marketing department
• Training and mentoring marketing staff on best practices, tools, and technologies
• Establishing and maintaining scalable processes that ensure best practices in campaign and lead management
• Coordinating with vendors and third-party service providers to ensure the effective execution of marketing programs and technology utilization

Job Requirements:

• Bachelor's degree in Electrical Engineering, Automation, or a related field.
• Proven experience in industrial automation systems, control circuits, and programming languages such as Python, C, or equivalent.
• Familiarity with industrial communication protocols, fieldbus protocols, MCCBs, contactors, and electrical schematics.
• Strong problem-solving and troubleshooting skills.
• Experience working at stations in overseas locations.
• Willingness and ability to travel and be stationed in developing countries and work in high stress environment and multitask.
• Minimum of 1 year of experience in marine equipment training and work in the marine field.
• Knowledge or experience with Dual Fuel (DF) Engines is a significant advantage.
• Required skills to communicate with customers for Sales and technical assistance.

Job Description:

• Support the implementation and execution of Marine / Industrial Remote Monitoring System projects.
• Perform troubleshooting, maintenance, and repair of electrical systems and circuits.
• Train and assist the overseas team in electrical engineering processes and best practices.
• Provide support for other technical needs as required.
• Assist with IT troubleshooting and maintenance of on-site IT equipment.
• To support the sales activities.
• Expand sales for existing & new customers and product portfolio and Implementing marketing strategies and analyzing trends and results.

• Provide driving service in/out of workshop
• To shift vehicles in and out of workshop for repair and services after registration at counter
• To send vehicle to LTA inspection
• To arrange and park vehicle properly and orderly in docking area
• To conduct road test for vehicle as required
• To assist in handling/taking over of courtesy vehicle
• To assist in checking courtesy vehicle status
• To assist in collection and sending vehicles outside workshop
• To ensure docking area tidiness and cleanliness
• To assist Service Department with adhoc trips such as collection of payment/spares
• To assist in washing/cleaning of Service Department courtest vehicle

Requirements

• Class 3 & 4 Driving License

Mun Siong Engineering Limited is a market leader in turnkey solutions for the Oil & Gas, Petrochemical, Energy, Pharmaceutical & Power industries for more than half a century.

What we offer

We pride ourselves in championing diversity, inclusion, work-life balance, and harnessing technology for a brighter future. For us, sustainability isn't just a buzzword, but a way of life. We also pride ourselves on being at the forefront of environmental responsibility, integrating eco-friendly equipment and practices into everything.

What you'll be doing

• Responsible for processing monthly payroll, overtime claims, allowances, and staff benefit claims.
• Administration of NS, Maternity, Paternity, and Childcare Claims.
• Tracking of attendance records, leave administration, and statutory claims.
• Work with site administration on payroll matters.
• Ability to churn our payroll and HR data-related reports on a regular basis.
• Ensure all payroll processes are aligned with MOM guidelines and internal policies and procedures.
• Ensure timely processing of monthly salary, CPF, FWL, relevant allowances, and contributions to government agencies

We’re looking for

• Min. Diploma / degree in Human Resources or equivalent.
• Min. 3 years of working experience in processing and managing payroll for exempt and non-exempt employees.
• Preferred proficiency in using Unit4 or Prosoft, Time and Attendance software, and Microsoft Excel.
• Good knowledge of Singapore Employment Act and personal income taxation under IRAS.
• Strong proficiency in Microsoft Office applications – Words, Excel, Powerpoint.
• Meticulous, able to work independently and a fast learner with strong organizational skills.
• Self-motivated and able to work under pressure.