. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

Key Responsibilities:

• Manage full accounts cycle, including bank reconciliation and journal entries.
• Ensure accurate data entry in for all transactions.
• Prepare financial data for entry into the financial system
• Keep accounting records and bank statements
• Ensure timely, accurate month-end and year-end closing
• Prepare and file GST returns
• Preparation of tax computation and tax planning
• Filling tax returns on time and updating the management about new changes in rules and regulations.
• Liaise and coordinate with external auditors and tax agents;
• Ensure accounting deadlines are met;
• Review subsidiary accounts
• Other ad hoc duties

Job Requirement

• Diploma in Accountancy or equivalent.
• Minimum 2 years of relevant accounting experience.
• Have prior experience in handling full set of accounts and statutory reporting
• Independent to fulfil tasks and a team player to perform tasks in the company workflow

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

• Required load and unload material etc
• Maintain material movement record.
• To comply with LTA road safety and traffic regulation and site safety.
• To conduct daily check to ensure vehicle is in good and safe condition/upkeeping of vehicle.
• Valid class 4 driving license and lorry crane operator.
• Prefer ably to start work within short notice.

1.Manage store Inventory & handle sales cash.

2.Receive ,distribute and maintain adequate quantities of stock at all times.

3.Maintain optimal stock levels.

4.Maintain stock and consumption records.

5.Check incoming materials for quality against invoices,purchase orders and packing slips or other documents.

6.Make clear notes on the receipt of the items against eash invoice.

7.Keeps and updates records of good received and issued.

8.Complies report of expenditure,and monthly stock report.

9.Perform related duties and responsibilities as assigned.

• Posting of recruitment advertisements
• Engagement with both internal and external stakeholders such as employees and vendors, etc
• Manage office sundry purchases
• Payroll administration
• Assists in employment contract renewals
• Coordinate medical arrangement for foreign employees (medical check-ups for work pass, and vaccination)
• Ensure complete, up-to-date, accurate and accessible records are kept for all employees.
• Assists in the co-ordination of social and recreational activities to promote the general welfare of all employees
• Performs HR data entry relating to employee's information, training records, etc.
• Manage and route phone calls appropriately
• Assists in work pass applications and other immigration related work.
• Prepare and submit government bodies and statutory board related surveys.

Job Description:

• Be directly involved in building, assembling, testing, troubleshooting and improving Unmanned Ground Vehicles (UGVs) by working with system experts.
• Handle system integration, testing, data collection, and validation of UGV's performance.
• Perform electrical and mechanical sizing, ensuring that components are properly sized and integrated.
• Work with electrical and control engineers on prototyping and troubleshooting systems.
• Assist in designing mechanical parts such as chassis and brackets.
• Manage the procurement of components.
• Create documentation, including design specs, test cases, system requirements, and user manuals.
• Work with technicians during integration and testing, and help resolve technical issues.

Requirements:

• Degree in Mechatronics, Robotics, Electrical/Electronics, Mechanical Engineering, or similar fields.
• Entry level candidate are welcome to apply.
• Knowledge and proficiency in system integration, control theory, motors, sensors, and mechanical systems.
• Familiar with CAD and troubleshooting of electrical and mechanical systems.
• Good problem-solving skills and the ability to manage multiple tasks and deadlines.
• Team player with strong communication skills, eager to learn and work in new technology areas.
• Experience building and testing robotics/control systems would be advantageous.
• Experience and/or understanding with communication interfaces like RS232, RS485, and CAN would be advantageous
• Experience and/or understanding of vehicle systems such as drivelines, steering and brakes would be advantageous.

We're Hiring: Project Coordinator for Renovation Projects

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.
• Maintain systems and component capabilities through rigorous testing, track cutting-edge trends, search for ways to improve functionality and efficiency, and implement appropriate segments to keep production methods current
• Prepare comprehensive documentation for all electrical designs, including wiring diagrams and schematics, bills of materials, assembly drawings, design changes, test reports, design-validation plans, and reports ensuring that installations and operations conform to standards and customer requirements

Analyze customer and project requirements, and provide technical guidance and recommendations to project teams and stakeholders

● Develop and implement testing and validation protocols to ensure that electrical systems and equipment meet or exceed industry standards and regulations

● Collaborate with other engineers, project managers, and stakeholders to ensure that projects are completed on time, within budget, and to the highest quality standards

● Stay up-to-date with industry trends, technologies, and best practices in electrical engineering, and recommend new tools and techniques as needed

• Supporting project communication systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.
• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation

Requirements

Primary Work Location: Jurong East Hub

Working Hours : 8.30am – 6pm

Qualification : Diploma in Mechatronic, Mechanical, Electrical & Electronic

Job brief

We are looking for a qualified Production Planner to organize production according to demand and quality standards. You will be the one to ensure our goods are produced on time for distribution in a profitable manner.

An excellent production planner is well-versed in production procedures and ways to optimize them. They are organized and results-driven with great problem-solving skills. Advanced communication and computer skills are very useful for the role.

The goal is to ensure the smooth and cost-efficient flow of our production operations.

Responsibilities

· Coordinate production workflow for multiple products

· Planning and prioritize operations to ensure maximum performance and minimum delay

· Determine manpower, equipment and raw materials needed to cover production demand

· Assign workers and other staff to particular production operations

· Schedule shift according to production needs

· Monitor jobs to ensure they will finish on time and within budget

· Address issues when they arise aiming for minimum disruption

· Obtain output information (number of finished products, percentage of defectives etc.)

· Prepare and submit status and performance reports

· Keep paperwork organized

· Collaborate with quality control, warehouse and other staff

Requirements and skills

· Proven experience as production planner

· Excellent knowledge of production planning and quality control principles

· Experience in MRP II (Manufacturing resource planning)

· Working knowledge of MS Office and ERP systems

· Good at math and statistics

· Strong organizational and problem-solving skills

· Excellent communication abilities

• Monitor or observe operations to ensure that they meet production standards

• Recommend adjustments to the process or assembly

• Inspect, test, or measure materials or products being produced

• Measure products with rulers, calipers, gauges, or micrometers

• Accept or reject finished items

• Remove all products and materials that fail to meet specifications

• Discuss inspection results with those responsible for products

• Prepare report inspection and test data

• Leadership: You set the tone for your team’s work environment. By giving clear directions and setting an example, you inspire others to follow suit. For instance, if punctuality is a priority, you’re always on time.
• Communication: Acting as a bridge between upper management and your team, you relay information effectively. You might, for example, convey new company policies and gather feedback from your team to share with higher-ups.
• Performance Management: You track your team’s productivity and quality of work. Suppose a team member is underperforming; you provide constructive criticism and potentially formulate a performance improvement plan.
• Training and Development: You identify skill gaps and recommend training programs. You could mentor a junior team member, enhancing their knowledge for better progress.
• Resource Management: You’re entrusted with managing the tools and materials your team needs. You would allocate these resources wisely to prevent bottlenecks in the workflow.
• Problem-Solving: When issues arise, it’s your job to identify solutions. If there’s a conflict between team members, you would mediate and help find a middle ground.

Job description

Non-Destructive Testing (NDT) technicians examine structures,vehicles, and products for flaws and structural weaknesses usingnon-destructive testing techniques. They conduct material tests,interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering,or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound,infrared, and radiographic.

Job Description:

• Overall in charge of site coordination.
• Manage and oversee the day-to-day activities of the project.
• Monitor and control the general workers' deployment on-site.
• Manage job costing against the work scope.
• Carry out work scheduling, material requisition planning, project coordination, and documentation.

Job Requirements:

• Minimum 01 year of related work experience in a similar capacity in the industry.
• Able to multi-task and work within tight schedules and deadlines.
• Strong leadership and problem-solving skills.

Team player and good communication skills with clients, consultants, sub-contractors and site staff.

• Assist and work with day to day production administrative works and operations of the Production/Processing Department by Engineer/Manager/Supervisor
• Support production operations functions with expert administrative support to the entire Production Team.
• Attend to production inquiries, calls, and email
• Responsible for updating and maintaining data and reviewing production records and orders.
• Responsible and maintain a proper record, filing for each department documents archival
• Issue of drawings to the relevant department for production
• Prepares purchase orders by verifying specifications and price
• Obtaining recommendations from suppliers for substitute items
• Obtaining approval from requisitioning department
• Assist to get supplier quotation
• Handle customer quotation enquiries
• Follow up on the on-going projects
• Co-ordinates on production schedule
• Data entry to ERP system, filing, photocopy and scanning
• Meticulous and organized with good time management
• Able to work in a fast-paced environment
• Proficiency in MS Office
• Strong written and verbal communication skills and the ability to multitask a high volume of tasks
• Ability to handle a very active desk supporting numerous simultaneous productions

Duties and Responsibilities

• Move inventory and materials across facilities
• Process inventory for delivery
• Sort, organize and store inventory in the proper location
• Package items and label correctly
• Delivered items and ensure quality
• Report damaged or missing inventory to supervisors
• Stack and organize large bulk items
• Remove inventory from trucks or shipping and delivery to proper location
• Update logs and documentation for inventory processing
• Move materials from facilities to workstations, pick-up locations, or other locations
• Wear safety gear at all times
• Operate heavy machinery like forklifts to move or store inventory
• Ensure workspace is free of debris and remove safety hazards from aisles
• Work as an active team member to complete team goals
• Prepare documentation and inventory for audits

Requirements and Qualifications

• Verbal and written communication skills
• Able to work in a fast-paced environment
• Familiarity with (ERP) system, and able to upload data into the company system
• Able to work independently
• Pays attention to detail and monitors the quality of inventory
• Highly organized and able to store items efficiently
• Computer literate, with excel skills/abilities

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

Duties & Responsibility

· Perform cleaning and minor hard FM repair or replacement such as sanitary, Light fitting and Fitting & Fixture.

· Putting on proper PPE and work attire at all time.

· Execute instructions dictated by Superior.

· Conform with Company’s Code and Conduct in public

· Multiple location

· 6 days work week

Job Description

A project manager is responsible for the direction, coordination, implementation, executive, control and completion of the project while remaining aligned with the strategy, commitments and goals of the organization.

Responsibilities

· Plan and implement projects

· Help define project scope, goals and deliverables

· Define tasks and required resources

· Collect and manage project team

· Manage budget

· Allocate project resources

· Create a schedule and project timeline

· Track deliverables

· Support and direct team

· Lead quality assurance

· Monitor and report on project progress

· Present to stakeholders reports on progress as well as problems and solutions

· Implement and manage change when necessary to meet project outputs

· Evaluate and assess the result of the project

Qualifications

· Excellent communication skills

· Problem-solving and leadership skills

· Project planning, risk management, time management and other project management skills

· Project management qualification (PMP), Certified Associate in Project Management (CAPM), or equivalent experience as a project manager

· Experience in strategic planning, risk management and/or change management

· Proficiency in project management software tools

· Contract negotiation

· Conflict resolution experience

Job Description

• Responsible for content planning and creation of marketing collaterals and assets, including copywriting and editing for newsletters, electronic direct mails, brochures, fact sheets, blog articles, case studies, videos, and website.
• Plan and implement integrated marketing campaigns for solutions, events and exhibitions.
• Generate content for digital marketing channels and social media platforms.
• Collaborate with agencies, external vendors and internal stakeholders to develop and ensure the timely delivery of social media campaigns and optimise performance metrics.
• Identify new marketing channels, platforms and media that better achieve marketing and business objectives.
• Assist in ad hoc marketing tasks and activities.

Job Requirements

• Experience in marketing communications and related fields.
• At least 5 years of experience in marketing or corporate communications.
• B2B experience preferred but not mandatory.
• Excellent command of the English language and storytelling skills.
• Independent self-starter with attention to detail.
• Strong project management skills.
• Excellent interpersonal and communication skills.

Accounts and Admin Assistant

Job Responsibilities

• Support finance, project and operations Team in general admin duties.
• Able to prepare a full set of accounts and a good understanding of double entry.
• Familiar with preparation of customer quotations and sales orders to support finance, project and operations activities.
• Tracking of customers quotations, sales orders and project delivery schedule.
• Maintain proper documentation of finance, project and operations control.
• Other duties as assigned from time to time by superior.

Job Requirements

• Minimum GCE ‘O’ level.
• Proficient in MS Office applications such as Excel, Windows and Power point.
• Preferably familiar in Xero accounting software and MurHo Inventory management system.
• Able to work independently for tasks and support finance, project and operations team in the execution of projects, operations, accounting and administrative duties.
• Prepared for interdepartmental transfer within the Sea Forrest Group of companies for job rotation roles in finance, projects and operations.
• Able to communicate effectively in English.
• Pleasant personality with a positive attitude and a willingness to learn.

Project Engineer duties and responsibilities

Project Engineers manage the planning and processes of a project and delegate responsibilities to ensure the project is completed efficiently and successfully. Their day-to-day duties and responsibilities may vary depending on the type of industry, company or project they’re working on, but typically include the following:

• Conduct regular meetings with clients to ensure clarification and meet specific requirements in a timely manner.
• Delegate tasks to team members according to their individual skill sets, experience and abilities to ensure efficient completion of the project.
• Maintain budgets and make adjustments according to needs as they arise.
• Track performance and analyze the completion of key goals.
• Document and report project progress to collaborators and clients.

Responsibilities:

1. Maintain financial records, handle accounts payable/receivable, and process claims.
2. Monitor cash flow and assist with monthly financial statements and reports.
3. Manage GST submissions, payroll, CPF contributions, and regulatory filings.
4. Maintain filing systems, issue POs/DOs, collate timesheets, and prepare payslips.
5. Provide HR support (e.g., employee records, onboarding).
6. Perform ad-hoc tasks.
7. Handle correspondence, emails, and inquiries.
8. Ensure compliance with financial regulations and policies.

Requirements:

• Min 4 years experience in accounting work.
• Proficient in accounting software (e.g., QuickBooks) and MS Excel.
• Detail-oriented with strong communication skills.
• Handle confidential information with integrity.

Work Conditions:

• Office location: 2 mins walk from Gul Circle MRT
• Part-time, 24 hours/week, flexible work hours arrangement.
• Salary: $2000 - $2500
• Trainings will be provided.

Duties

• Create CNC programs, plan tooling & fixture for Mill & Turn machining
• Generate routing processes in ERP system
• Estimate machining cycle time each routing processes
• Perform technical planning and specification of the production process
• Production schedule, loading & capacity
• Liaise with customers for technical and specification require
• Establish PMP (Process Management Plan) as per customer requirements
• Analyze existing capacity & resources and propose for optimizing utilization
• Technical support for daily manufacturing process including design jig & fixtures
• Review existing processes and establish the best machining processes
• Propose new ideas for continuous improvement
• Mastercam / Solid cam

Requirements

• Min. 5 years experience in a manufacturing environment, preferably in precision Engineering
• Advanced/Higher/Graduate Diploma/Post Graduate Diploma in Mechanical /Manufacturing Engineering field preferred
• Strong in technical skill and able to read mechanical drawing
• Possess knowledge of CNC & CAD programming, Solidwork/Solidcam, Mastercam
• In-depth knowledge of machining processes
• Efficient in Microsoft Office
• Able to work independently and as a team
• Handles multi-tasking and stress well