Duties to Be Performed:

We are looking for a Project Manager – Process Systems Specialist in the either or all of the following systems,

- Gas / Environmental / Ultra Pure Water / Chemical Systems.

The prospective candidate will be responsible for the following,

- Responsible for Concept and Detailed Design for Process Facility systems for the entire course of the project (Conceptual Design, Detailed Engineering calculations, System & Component sizing, Budgeting, Drawing development coordination from Engineering up to Construction stage e.g. PIDs / layouts / sections).

- Capable in interdisciplinary understanding and managing of relevant interfaces.

- Detailed understanding of all technical standards, drawing formats and symbols.

- Tendering process (e.g. Technical and Commercial bid evaluation).

- Time and schedule management.

- Check and review engineering document and drawings for accuracy and completeness for submission and shop fabrication (e.g. Submittal Procedure).

- Lead system design and reviews with customers and ensure customer sign off and approval.

- Review of all the bench mark data, scope and design change and contract variation aspects.

- Ensure Project Director/ Manager is kept aware of the process engineering design and construction progress and any cost and schedule impacts.

- Coordinate installations with sub-contractors on site.

- Support CSA & M&E team for the design including CAD team and project effectively & efficiently.

- Involved in the Commissioning of Systems and develop the documentation with the sub-contractors.

- Consolidate and upkeep of in-house engineering Standards.

- Able to work independently.

- Able to travel/ relocate.

Duties to Perform:

The Senior Chemical Engineer will work on designing, tendering, and monitoring the installation of bulk chemical and high purity chemical systems for industrial facilities in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk chemicals, high-purity chemicals, slurries, and related distribution networks.

The Senior Chemical Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, pecifications, standards, logistics, and detailed drawings for tender.

The Prospective Candidate will review proposals from contractors and continue to support them during installation when required. The Prospective Candidate will work closely with other disciplines such as Architects, Civil, Cleanroom, Electrical, Automation, Mechanical, and Construction Engineers, as well as CAD/ BIM designer in designing and delivering the project.

Requirements:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity chemicals and distribution systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing Gas systems will be definite added advantage.

Your familiarity with the Semi standards and both Singapore and Malaysia standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage. You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to Travel/ Relocate.

The Technical Writer is responsible for producing product documentation for industrial automation solutions, which are used
in mission-critical environments such as oil refineries, power plants, and chemical facilities. You will be based in Singapore as part of an established team of technical communication professionals, and he/she will work with stakeholders located in various geographical locations. He/she will be provided with advanced authoring tools,
documentation methodologies, and extensive training.

JOB DESCRIPTION

• Communicate and collaborate with subject matter experts to understand the requirements.
• Structure complex information into an organized and logical format.
• Convey complicated ideas into simple instructions for international users.
• Apply topic-based authoring and content architecture techniques to produce easy–to-use manuals.
• Manage and use budgeted time and resources to produce expected results without delays.

JOB REQUIREMENTS

• Diploma/Degree in Computer Engineering, Computing (Software Engineering), Computer Science
• Diploma holders with relevant technical writing work experience will also be considered.
• At least 3 years’ experience in writing technical documents or manuals for software or related products.
• Experience in authoring and publishing content for external customers.
• Experience in using more than one of the following tools:
• Adobe Acrobat
• XML authoring tools, including but not limited to Adobe FrameMaker, Oxygen XML and XMetaL Author
• Enterprise
• JIRA
• Microsoft Office applications (Word, Excel, Project, Visio)
• Experience in using a content management system

Yokogawa is an Equal Opportunity Employer. Yokogawa wants a diverse, equitable and inclusive culture. We will actively recruit, develop, and promote people from a variety of backgrounds who differ in terms of experience, knowledge, thinking styles, perspective, cultural background, and socioeconomic status. We will not discriminate based on race, skin color, age, sex, gender identity and expression, sexual orientation, religion, belief, political opinion, nationality, ethnicity, place of origin, disability, family relations or any other circumstances. Yokogawa values differences and enables everyone to belong, contribute, succeed, and demonstrate their full potential.

Are you being referred to one of our roles? If so, ask your connection at Yokogawa
about our Employee Referral process!

The Product Tester Engineer will work in Interoperability Test Lab in Singapore Development Centre. This Test Lab performs integration tests of multi-vendor devices such as transmitters, control valves, multiplexers, remote IOs etc, against Yokogawa Control Systems (CENTUM VP, ProSafe-RS, Stardom, PRM and FieldMate)

The main responsibilities are:

• Liaise with device vendors for coordinating testing requests
• Plan and execute product testing
• Setup, maintain and upgrade lab assets, review test procedures and work process and implement improvement periodically
• Support in first line troubleshooting of customer reported issues related to tested products
• Support product development team for each development release or ad-hoc testing

Requirements:

• Minimum 3 years of experience in the process automation industry, either in instrumentation or control system
• Degree in Engineering/Computer Sciences
• Knowledge of digital communication protocols such as HART, Foundation Fieldbus, Profibus/Profinet, ISA100, WirelessHART, OPC-UA etc
• Knowledge of standard technologies such as FDT/DTM, FDI, PA-DIM, OPA, NOA etc
• Experience with Yokogawa DCS system and Field Instrument products would be valuable
• Some experience with product software testing would be advantageous

Yokogawa is an Equal Opportunity Employer. Yokogawa wants a diverse, equitable and inclusive culture. We will actively recruit, develop, and promote people from a variety of backgrounds who differ in terms of experience, knowledge, thinking styles, perspective, cultural background, and socioeconomic status. We will not discriminate based on race, skin color, age, sex, gender identity and expression, sexual orientation, religion, belief, political opinion, nationality, ethnicity, place of origin, disability, family relations or any other circumstances. Yokogawa values differences and enables everyone to belong, contribute, succeed, and demonstrate their full potential.

Are you being referred to one of our roles? If so, ask your connection at Yokogawa
about our Employee Referral process!

• Source for tenders
• Analyse tender documents, drawings and specifications
• Conduct quantity take off and estimate costs
• Coordinate with suppliers and sub-contractors to prepare costing for tender submission
• Prepare tender and supporting documents for submission
• Follow up on any technical clarifications during post-tender stage
• Attend site showrounds and tender interviews
• Prepare sub-contractor agreement, work order and VO
• Monitor project progress and control budget
• Collaborate with Project Team to track work progress for claim submission to Main Contractor
• Assess sub-contractor's monthly claims and prepare payment certificate/response

Job Requirements

• Degree / Diploma in Mechanical Engineering or equivalent.
• Minimum 2-4 years experience in Construction, preferably in handling ACMV / HVAC projects for building construction industry.
• Knowlegeable of ACMV details, local codes and regulations.
• Strong interpersonal and written communication skills.
• Ability to work independently while being a good team player.
• Strong follow up and closure skills

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

RESPONSIBILITIES

• Define and deliver products and services that meet customer needs by selecting the best possible approaches available within established systems.
• Develop product specifications and design test procedures and standards.
• Analyze specific problems and issues to find the best solutions.
• Conduct research using primary data sources and select information needed for the analysis of key themes and trends.
• Create and maintain technical and/or user documentation to a high standard and back up files to ensure instant recovery if problems occur.
• Organize and prepare complex documents using a variety of applications for technology devices such as standard office software.
• Responsible for gathering and summarizing data for special reports.
• Identify, within the team, instances of non-compliance with the organization's policies and procedures and/or relevant regulatory codes and codes of conduct, reporting these and escalating issues as appropriate.
• Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation where relevant to improve performance and fulfill personal potential.
• Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media.

REQUIREMENTS

• Minimum bachelor's degree in electrical or information technology
• At least 8 years of experience for Product development, project implementation, sales and proposal exercise.
• Database structure design skill for Oracle or SQL database.
• Experience in Supply Chain, Logistic, Tank Farm project knowHow.

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

We regret to inform that only shortlisted candidates will be notified.

Duties to Perform:

The senior Gas Engineer will work on designing, tendering, and monitoring the installation of bulk gas and special gas systems for industrial properties in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk gases, high-purity inert gases, flammable gases, corrosive gases, hazardous gases, and related distribution networks.

The senior Gas Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, specifications, standards, logistics, and detailed drawings for tender. He or she will review proposals from contractors and continue to support them during installation when required.

The successful candidate will work closely with other disciplines such as architects, civil, cleanroom, electrical, automation, mechanical, and construction engineers, as well as CAD/ BIM designer in designing and delivering the project.

Requirements:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity, and specialty gases and systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing chemical systems will be definite added advantage.

Your familiarity with the Semi standards and Singapore standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage.

You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to work independently.

Able to travel / relocate.

Responsibilities

• Tracks progress of each project against goals, objectives, approved budgets, approved timelines. Reports status and variances. Creates action plans to meet objectives, budget and schedule.
• Meet with potential clients and grow long-lasting relationships that address their needs
• Implements change management routines to assess change requests, make recommendations, secure business and line management approvals, and issue change orders. Assesses change requests to determine impacts to scope, budget, schedule, quality and risk
• Any other adhoc duties as and when assigned
• Assist Manager in daily works.
• Assist in evaluating vendors, suppliers, examiners, checkers, sub-contractors, direct supply labour force etc.
• Site material control and field engineering
• Planning and Assign workers day to day jobs at various locations

Requirements

• Execution on site manpower arrangment
• Ability to forecast and prepare budgets and provide quotation
• Excellent communication, interpersonal, and organizational skills
• Superb leadership ability
• Ability to travel at least 80% of the time
• Strong business sense and industry expertise

The Commercial Manager plays a crucial role in managing and optimizing the commercial aspects of semiconductor facility construction projects. This position requires a blend of expertise in project cost management, contract administration, procurement, and financial forecasting. The Commercial Manager will work closely with project teams, contractors, suppliers, and clients to ensure the successful delivery of projects within budget, timeline, and contractual obligations.

Responsibilities:
• Develop and implement the commercial strategy for each project, aligning with the overall business goals.
• Lead the budgeting process, ensuring accurate cost estimations and financial planning from project inception through completion.
• Manage the preparation, negotiation, and finalization of all commercial agreements, including client contracts, subcontracts, and supplier agreements.
• Ensure compliance with all contract terms, identifying and addressing any potential risks or deviations from the contract.
• Oversee the procurement process for materials, subcontractors, and services, ensuring high-quality and cost- effective procurement practices.
• Analyze client requirements and provide technical expertise to guide project development
• Monitor project financials, including cash flow, costs, and profitability, ensuring alignment with budgets.
• Implement cost control measures to minimize overruns and ensure efficient resource allocation.
• Provide monthly reports and project forecasts to senior management, highlighting any financial risks or variances.
• Proactively identify and mitigate financial, legal, and commercial risks that could impact project outcomes.
• Address and resolve issues related to contract claims, disputes, or delays in a timely and efficient manner.
• Act as the primary commercial point of contact between the client, contractors, suppliers, and internal teams.
• Regularly update senior management and clients on project performance, commercial health, and key milestones.
• Ensure that project teams are aligned with commercial objectives and contractual obligations.
• Track and report on project performance, including cost forecasting, schedule adherence, and profitability.
• Ensure the commercial performance of projects is in line with agreed financial targets and KPIs.
• Ensure all commercial activities comply with industry standards, regulations, and company policies, particularly in semiconductor facility construction (e.g., cleanroom design, HVAC systems, utilities, etc.).
• Ensure adherence to all health, safety, and environmental regulations.

Requirements:
• Bachelor's Degree in engineering or related field
• Minimum of 10 years of experience in commercial management role, preferably within the semiconductor, industrial construction, or high-tech building sectors.
• Extensive experience in contract negotiation, procurement, and cost management for large-scale construction projects.
• Excellent problem solving, analytical, and communication skills
• Proven ability to manage contracts, risk, and procurement processes effectively.
• Proficiency in project management software, Microsoft Office, and financial reporting tools.
• Ability to collaborate and influence at all levels of the organization.
• Strong leadership and decision-making abilities.
• Results-driven with a focus on maximizing value while managing risks.
• Highly organized and able to manage multiple projects simultaneously
• Able to travel / relocate

• Prepare submission for shop drawing, details drawing, as-built drawing using Autocad & Revit Software.
• Preparing M&E drawings, coordination drawings with Customer / Sub Contractors / Project Engineer.
• Knowledge in drafting with Autocad & Revit Software
• Prepare M&E Shop Drawings and review sub contractor’s shop drawing before submission to Architect for approval.
• To coordinate between Sub-contractor, Consultants and Project Teams.
• Able to work independently and good team player.
• Updating drawings and correspondences
• Preparation of Mechanical Co-ordination Drawing.
• Checking of M&E Shop-drawing.
• Updating M&E Shop-drawing List.
• Supporting M&E Project Team on Shop-drawing Submission

Introduction:

Hostmost Group of Companies is a leading Marine Radio Communications and Navigation system service provider. Established in 1989, we have expanded our operations globally, providing reliable services to clients across different regions. With 14 wholly owned offices and depots spanning Asia to North America, we pride ourselves on maintaining a strong global service network. At Hostmost Group, we believe in continuous improvement and invest in staff training to stay ahead of industry trends and requirements. Our group is currently expanding and there will be several vacancies available.

Job Descriptions:

• Processing of sales & service orders
• Handling of delivery arrangement
• Maintaining and updating database including stock-in & out data
• Liaising with customers on their orders & requirements
• Assisting Sales Team on filing, data entry and follow-up (when necessary)
• Any ad hoc duties as assigned

Job Requirements:

• Minimum "O" level
• Able to converse in English
• Knowledge of ERP, SAP, and MICROSOFT BUSINESS CENTRAL will be an advantage.
• At least 2 years of working experience in Admin coordination work
• Team Player

Location:

• Near Pasir Panjang MRT station (SINGAPORE)

Interested candidates who wish to apply for the advertised position, please send full resume with the following details:

1. Reasons for leaving ALL your employment

2. Current & expected salary

We regret that only shortlisted candidates will be notified.

We are currently prioritising candidates able to work in Singapore without the need for sponsorship of an employment visa.

Job Types: Full-time, Permanent

Pay: $2,500.00 - $3,000.00 per month

Benefits:

• Dental insurance
• Health insurance

A building construction project engineer is responsible for overseeing and managing construction projects, ensuring they are completed on time, within budget, and according to specifications. Their duties typically include coordinating with architects, contractors, and subcontractors, managing project schedules, ensuring compliance with safety regulations, and addressing any issues that arise during the construction process.

Position Summary:

• Responsible to work as a Project Manager. Overall responsibility for the project in all aspects including the overall quality, schedule, cost, HSE and human relations amongst the team members. Major proposals are considered as a specific type of project. The Project Manager is the chief representative of Worley to the Client for information or decision relative to the assigned project.

Technical/Functional Responsibilities:

• Acts as "hands on" manager in a complex network of interrelated activities necessary to move technical and engineering information forward to complete the design, construction and initial operation of the required facilities
• Ensures overall direction and coordination of efforts for major proposals, E/EPC contracts for services or alternatively as a combination of various smaller projects of a similar technology or for the same Client
• Enforces the solution of problems in the following phases of a project
• project development/process design/detailed design/engineering
  design/drafting/procurement/construction/start-up
• Ensures project execution within the HSE, cost, time, quality and technical objectives to which Worley is committed
• Issues HSE instructions to employees working on a construction site and checks the adherence to HSE regulations and instructions, and ensures training of personnel in HSE aspects of their respective duties
• Ensures project execution within the final objectives as determined by Worley’s management
• Ensures project parameters are in line with legal requirements
• Prepares and issues the project execution and quality plan. Issues the project schedule; the approved budgets for services; the approved budgets for equipment (number and basic design) and bulk material quantities if required by the nature of the project
• Is sole representative of Worley towards the Client
• Reviews all Client's requests for changes
• Approves all proposed contract variations (Client changes: on Client's request or identified) before submittal and negotiates payment with Client
• Ensures that required project information flows to him
• Issues instructions for historical filing if required
• Ensures the project release to the Client
• Ensures the compliance with authority requirements
• Responsibilities includes:-
• Meeting Worley’s financial targets as set for the projects under his supervision
• The overall planning, organization, direction, coordination and control of all operations to meet the project objectives
• The (progress) payments and final acceptance by the Client (within the contract conditions and at an optimum cash flow)
• The adherence to the Worley’s organization procedures, the project execution and quality plan and project procedures
• The preparation of the project close-out report according to the Worley’s organization procedure for close-out
• Verifying that contractors, upon contract award, have been instructed with regard to the applicable legal HSE regulations and Client’s requirements
• He has the overall responsibility with respect to HSE matters for a specific project, and delegates specific related activities to his team members
• Review of the HSE performance with the construction manager
• He is responsible for seeing to it that no adverse situations exist in the projects for which he is responsible. He will instruct the project team members accordingly and he will take or initiate the necessary corrective measures

Requirements:

• University engineer in mechanical or chemical engineering, preferably with training in management techniques (or equivalent) or Industrial engineer in mechanical or chemical engineering, preferably with training in management techniques (or equivalent)
• VCA basic HSE training (or equivalent) and VCA leading HSE training (or equivalent)
• 10+ years of experience in engineering & contracting of which 3+ years of experience as a Project Manager with at least a recent EPC contract
• Sound knowledge of project management techniques
• Good understanding of relevant contractual matters
• Sound knowledge of Worley’s procedures
• Working knowledge of the application of computerized systems particularly those to be used for projects
• Broad knowledge of other professional areas within Worley
• Proven ability to communicate
• Proven social skills

Job Description

• Conduct Site Survey
• Site coordination with Customers/Main Contractor/Sub-Contractor
• Attend Site Meetings
• Supervising of work and coordination of Site activities
• Ensure Projects are handover on time
• Planning and arranging of purchasing materials
• Any other work as required

Job Requirements

• Possess of valid Class 3 Driving License will be preferable
• Diploma in Engineering field (Electrical/Mechanical)
• Minimum 3 years relevant working experience in Fire Protection/M&E Engineering field will be preferable
• Independent with good interpersonal skill

• Experienced in the design of water treatment plants (desalination, potable water, recycle water), wastewater treatment plants (municipal and industrial) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S, Piping & Systems/Skids Engineering and Drafting) on development of engineering deliverable on a timely basis.

• Reviewing and providing input to project schedule and ensure all planned dates and progress are realistic. Provide updates on engineering deliverables per schedules and implement catch-up actions where applicable.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

• Assist the Engineering Manager on the development of FAT, SAT, Pre-Commissioning, Start-up, Commissioning protocol and support the implementation.

• Development of Operational & Maintenance Manual.

• Assist the Engineering Manager to support project management team in project implementation related engineering, troubleshooting and maintenance requirement.

Job Description & Requirements

Responsibilities

• Assist in overtime and payroll calculation
• Answer employee queries regarding leave, salary and overtime
• Update and maintain leave records in Info-Tech system
• Update and maintain employee records in Info-Tech system
• Coordinate document submission with site staff
• Assist in recruitment
• Assist in all foreign worker matters
• Assist in recommending, sourcing and booking of training courses for staff development
• Provide advice to The Management regarding employment legislation and HR practices
• Any other ad-hoc work

Requirements

• Knowledge and understanding of MOM employment law
• Higher Nitec with 2 years work experience, ideally in a construction related field
• Knowledge of Info-Tech software
• Able to communicate effectively with local and foreign employees of all levels
• Willing to learn and grow
• Able to work in a team
• Good work ethics
• Positive character and attitude

Other information

• Working hours: Mon - Fri, 8.30am to 6pm
• Working location: Tampines West

About US

UTEC was first established in Singapore on 9 December 2014 and we specializes in civil and tunnel infrastructure construction works, with projects based locally and throughout Asia Pacific. The Company draws on the skills and expertise of its people to deliver tailored underground engineering solutions, striving to provide the best engineering solution and economics to its client. Since its establishment as a Contractor in underground works, the Company has been involved in projects not only in Singapore, but as far as India as well.

OUR VISION

Providing innovative, cost effective & sustainable solutions to underground works, bringing the best engineering solutions to our clients and all the stakeholders.

About This Role

1. Carry out land and engineering surveys required for the construction.

2. Lead the execution of topographic and as-built surveys to capture essential data.

3. Check and compute the pre-computation prior to any setting out for field surveyors and verify the accuracy of survey data, measurement and calculations.

4. Propose engineering documents for clients' approval, on-site installation and hands-on monitoring of sensors, instruments and equipments.

5. Attending project meetings, schedule control, monitor site personnel ensuring data processing, review, analysis, submission of reports.

Skills Required

1. Well verse in surveying technology and equipment.

2. Proven track record in land surveying.

3. Understand geotechnical instrumentation.

4. Proficient in Microsoft Office and AutoCAD.

*May required to work OT when necessary.

*This role is on 5.5 days workweek and work location is currently located at the central.

*More details of the role, company and benefit will be shared during the interview for shortlisted candidate.

These are our Featured Projects that we are Proud to show you:

SINGAPORE

1) PUB – Deep Tunnel Sewage System Contract T-11,

2) LTA – Thomson Line T206

OVERSEAS

1) INDIA - Mumbai Metro Line 3 – UGC07

2) MALAYSIA - Prasarana Malaysia Bhd – LRT3

3) HONG KONG - CEDD – Kai Tak Development Stage 3B

AND MORE ARE ONGOING AND COMING!

Job Description

• 5 years relevant working experience in Water Treatment industries is preferable.

• Experienced in the design of water treatment plants (desalination, potable water, demineralization) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.), experience in Demineralization System will be added advantage.

• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/EDI), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager & Lead Engineer, Process on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S and Drafting) on development of engineering deliverable on a timely basis.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

Requirement:

• Degree in Chemical Engineering or Environmental.

• Prior experience of at least 5 years in process design. Experience in UltraPure Water (UPW) will be added advantage.

• Ability to establish and maintain appropriate relationships with team members.

• Able to work independently with minimal supervision

JOB SUMMARY:

We are seeking a dynamic and experienced Project Engineer to lead the design, implementation, and management of integrated energy systems, including solar, battery storage, generators, IoT-enabled platforms, and smart utilities solutions. The role demands expertise in renewable energy systems, IoT technologies, and smart utilities, with a focus on creating sustainable, efficient, and future-ready infrastructure.

RESPONSIBILITIES:

Key Responsibilities

Project Design and Development

o Engineer integrated energy systems combining solar PV, battery storage, generators, IoT platforms, and smart utility solutions.

o Conduct energy audits, feasibility studies, and performance simulations for both energy and smart utility projects.

o Create designs for smart utilities, including energy-efficient lighting, water metering, HVAC systems, and waste management.

Smart Utilities Integration

o Develop and implement smart utility systems to optimize energy, water, and resource usage.

o Integrate IoT-based solutions for real-time monitoring of utilities such as smart meters, leak detection systems, and automated controls.

o Enhance infrastructure efficiency through predictive analytics and data-driven optimization strategies

System Integration

o Oversee hybrid energy system integration, ensuring seamless functionality between solar, battery, generator, and IoT solutions.

o Incorporate smart grid and distributed energy resource (DER) management capabilities.

o Design and integrate communication networks (e.g., Modbus, Zigbee, LoRaWAN) for utility and energy systems.

Project Execution

o Manage the end-to-end lifecycle of energy and smart utility projects, including planning, procurement, installation, commissioning, and handover.

o Collaborate with multidisciplinary teams, contractors, and third-party vendors to meet project goals.

o Ensure all projects comply with local regulations, codes, and safety standards.

IoT and Automation Solutions

o Design IoT-enabled control systems for energy management, utility monitoring, and automation.

o Implement smart dashboards, predictive maintenance systems, and user-friendly interfaces for clients.

o Resolve communication and integration issues between IoT devices and cloud platforms.

Quality Assurance and Maintenance

o Perform inspections, testing, and troubleshooting of energy and utility systems.

o Ensure high system reliability by implementing preventive maintenance schedules.

o Document all processes, configurations, and test results for compliance and auditing purposes.

REQUIREMENTS:

· Bachelor’s degree in Electrical Engineering, Renewable Energy, IoT Engineering, or a related field.

· Advanced degree or certifications in Smart Utilities, Energy Systems, or IoT Technologies is a plus.

· 3 – 4 years of experience in designing and managing solar, battery, generator, IoT, and/or smart utility projects.

· Proven expertise in hybrid energy system integration and smart infrastructure projects.

· Proficiency in energy modeling and simulation tools (e.g., PVsyst, HOMER, ETAP).

· Familiarity with smart utility systems like smart meters, advanced HVAC controls, and water management solutions.

· Hands-on experience with IoT platforms, protocols (e.g., MQTT, LoRaWAN), and communication technologies.

· Knowledge of renewable energy technologies, power electronics, and utility management systems.

· Proficiency in tools like AutoCAD, or other design and engineering software.

RESPONSIBILITIES:

• Perform testing and commissioning of complex servers and storage products
• Perform quality assurance and risk assessments of end products
• Handle re-configurations in accordance to customer’s specifications
• Software loadings
• Basic knowledge of server and able to handle failure analysis (FA).
• Able to identify various error codes for individual failed server given by the diagnostic program
• UNIX and hardware based troubleshoot and rework on the failed server unit.
• Rack NPI, production check, test and troubleshooting failed unit.
• Assists Engineers for pilot Run orders and other product related issues.
• Keeping Engineers well informed of the found discrepancies on the line.
• Daily updates of the orders on the line, generating daily, weekly and monthly reports and keeping the line well maintained and organized.
• Other ad-hoc duties assigned in accordance to business needs.

REQUIREMENTS:

• Diploma in Electrical / Electronics / Mechatronics / Computer Engineering
• Willing to learn and able to pick up skills quickly
• Good in communication and a good team player
• Familiar with MS Office and good in documentation
• Willing to commit to overtimes

OTHER INFO:

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• 
  Working Days / Hours: 7am – 3pm [Mondays to Fridays]

----------------------------------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:

Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Responsibilities:

• Engaged in multidisciplinary teams in designing, developing, and implementing sustainable solutions
• Ensure successful project delivery within project timelines, budgets and Quality metrics
• Engage with startups, research institutions and industry expert
• Represent Yokogawa at conferences, workshops, and industry events
• Develop solutions in sustainability focus areas such as Net Zero, Circular economy, and well being
• Contribute to patent filings and intellectual property development. Publish white papers and represent in conference

Requirement:

• Master or Bachelor's Degree in Engineering, Science or Management
• Minimum 3 years of relevant experience in technology development, research, or innovation in sensing, control and optimization
• Proven track record of proposing / executing successful R&D grant projects and research collaborations
• Relevant data analytics and programming skills needed to support the research work
• Experience in handling both agile projects and an industry project
• Experience in new ventures and start up is a plus

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

Introduction:

Hostmost Group of Companies is a leading Marine Radio Communications and Navigation system service provider. Established in 1989, we have expanded our operations globally, providing reliable services to clients across different regions. With 14 wholly owned offices and depots spanning Asia to North America, we pride ourselves on maintaining a strong global service network. At Hostmost Group, we believe in continuous improvement and invest in staff training to stay ahead of industry trends and requirements. Our group is currently expanding and there will be several vacancies available.

Job Descriptions:

· Manage sales enquires and process quotations.

· Process sales or service orders.

· Process draft billings.

· Meet up with customers.

· Any ad hoc duties as assigned

Requirement:

· Diploma & above.

· Minimum 2 years of sales or admin experience. Commensurate with experience.

· Knowledge of SAP will be an advantage.

· Only Locals (Singaporean or PRs) need to apply.

Location:

· Near Pasir Panjang MRT station (SINGAPORE)

Interested candidates who wish to apply for the advertised position, please send full resume with the following details:

1. Reasons for leaving ALL your employment

2. Current & expected salary

We regret that only shortlisted candidates will be notified.

Job Types: Full-time, Permanent

Benefits:

· Dental insurance

· Health insurance

Schedule:

· Day shift

· Monday to Friday

· Weekend availability

Supplemental pay types:

· 13th month salary

· Performance bonus

Education:

· Local Polytechnic Diploma (Preferred)

Experience:

Sales: 2 years (Preferred

1. To coordinate and manage building construction M&E site works.

2. Ensure all M&E works are performed on time and in compliance with all necessary standards, code of practice and safety regulations.

3. Responsible for the supervision and coordination of M&E works at construction site.

4. Monitor progress, quality of workmanship and compliance.

5. To coordinate M&E wall/floor penetration drawings for approval.