Responsibilities:

• Responsible for pre and post contract QS services;
• Handles interim and final payment claims and feedback comment to payment response to Management
• Job site visiting and monitor site progress
• Responsible for quantities taking-offs, work out variations claim, verify measurements with the client
• Handles contract administration and settlement of final accounts with clients & subcontractors;
• Monitors project phasing & payments;
• Preparation & Revision of Construction Programmes & follow-up delay claims

Requirements:

• Degree in Applied Science in Construction Management or Diploma in Building Services / Mechanical / Electrical engineering
• Able to meet challenging work demands and tight schedules
• Good interpersonal and communication skill
• Good command of spoken and written English
• Independent and resourceful

Work Location: 8 Tuas Avenue 18, Level 5, Singapore 638892 (Company bus at 0800hrs Tuas Crescent MRT Exit B bus stop)

Working Hours: Monday to Friday: 08:30 AM - 05:30 PM

Probation period fully on site
thereafter, on site Mon, Tue and Fri

Flexi Dollars: $700 per year (medical, dental, optical claims)

• Match purchase orders to invoices and perform invoice entry into ERP.
• Process payments through receiving, processing, verifying and reconciling invoices.
• Identify and flag out any irregularities detected during invoice processing.
• Record expenses to accounts and cost centers based on the invoice nature.
• Perform weekly payment runs to suppliers and employees.
• Perform supplier reconciliation on monthly basis.
• Filing documents.
• Perform bank reconciliation for payment.
• Prepare audit sheet schedules.
• Attend to supplier’s inquiries.
• Any other tasks/projects assigned by immediate supervisor.

Requirements

• Diploma in Finance/Accounting
• Must have at least 1 year of accounts payable/general accounting experience.
• Knowledge of accounts payable and general accounting principles.
• Proficient in relevant ERP systems - AX Dynamics system and MS Office.
• Knowledge of regulatory standards and compliance requirements.
• Attention to detail, good communication, time management, and organizational skills.
• Team player and able to work independently with minimal supervision.
• Preferably staying in the west

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Oversee the installation, calibration, and testing of instrumentation and control systems
• Conduct functional and performance tests for instrumentation and control systems
• Identify and troubleshoot issues during commissioning and ensure timely resolution
• Collaborate with engineering and construction teams to ensure seamless integration of systems
• Prepare and maintain accurate documentation and reports related to commissioning activities
• Ensure compliance with safety standards and protocols
• Any other duties to be assigned from time to time

Pre-requsites:

• Bachelor's degree in Electrical, Instrumentation, or a related engineering field.
• Minimum 5 years of experience in commissioning instrumentation and control systems in power plant or industrial projects
• Strong knowledge of control systems, instrumentation and DCS
• Excellent troubleshooting and problem-solving skills
• Ability to work in a team environment and communicate effectively
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

Key Responsibilities:

AI Model Development: Design, develop, and deploy machine learning models and algorithms to solve complex business problems.

System Maintenance: Monitor and maintain AI systems to ensure optimal performance, reliability, and scalability.

Data Management: Collect, pre-process, and analyze large datasets to train and validate AI models.

Collaboration: Work closely with cross-functional teams, including data scientists, software engineers, and business stakeholder, to integrate AI solutions into existing systems.

Continuous Improvement: Stay updated with the latest advancements in AI and machine learning, and implement best practices to enhance our AI capabilities.

Experience:

• System Integration & Deployment
• System Monitoring and Maintenance
• Software system version control

Knowledge and Skills:

• Programming Languages
• Machine Learning & Deep Learning
• Data Management
• Natural Language Processing
• Computer Vision
• Computer System Monitoring and Maintenance
• Good communication skills, both written and oral
• Team player with the ability to work independently
• Stakeholder Management
• Analytical Skills
• Problem Solving Skills

Education, Qualifications and Special Training

• Educational Background: Bachelor’s or Master’s Degree in Computer Science, Engineering, or a related field.
• Technical Skills: Proficiency in programming languages such as Python, R, or Java. Experience with machine learning frameworks like TensorFlow, PyTorch, or scikit-learn.
• Problem-Solving: Strong analytical and problem-solving skills with the ability to think critically and creatively.
• Communication: Excellent verbal and written communication skills to effectively convey technical concepts to non-technical stakeholders.
• Experience: Prior experience in AI/ML projects, preferably in a corporate setting.

Personality Traits:

• Strong sense of responsibility and task ownership
• Strong communication skills and interpersonal skills
• Strong curiosity about new technologies, management paradigms that are relevant to the company and Marine industry
• Able to work under pressure
• Able to work independently, and with incomplete information

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Review project specifications, technical clarifications and construction drawings.

Coordinate with Architect, Structural Engineer, M&E Engineer and Subcontractors to resolve construction problems and issues to ensure timely and smooth progress of works

Coordinate all architectural drawings and works, prepare, submit and update status of shop drawings & As-Built submission and material approval

Liaise with Subcontractors on technical issues to ensure timely submission an approval of shopdrawings

Position: Project Supervisor – Fire Alarm Projects
Location: Singapore
Company: WENG ENGINEERING PTE LTD.
Job Type: Full-time
Salary: Competitive + Benefits

About Us:
We are a provider of fire protection, fire alarm systems and safety solutions. We specialize in delivering high-quality, reliable, and compliant fire alarm systems to commercial and residential properties. As we continue to grow, we are looking to expand our team and are seeking a highly motivated and experienced Project Supervisor to manage our fire alarm projects.

Job Description:
As a Project Supervisor for Fire Alarm Projects, you will be responsible for overseeing the successful installation, maintenance, and servicing of fire alarm systems. You will manage the day-to-day operations of fire alarm projects, ensuring they are completed on time, within budget, and in compliance with safety standards and regulations.

Key Responsibilities:

• Supervise and lead a team of technicians and installers during fire alarm projects.
• Plan, coordinate, and schedule fire alarm installation and maintenance work.
• Ensure compliance with all local fire safety regulations, standards, and codes.
• Manage project budgets, timelines, and resources effectively.
• Communicate with clients to provide updates, address concerns, and ensure satisfaction.
• Conduct site inspections and monitor the quality of work to ensure the highest standards.
• Troubleshoot and resolve technical issues as they arise during the project lifecycle.
• Maintain accurate documentation of project progress, inspections, and reporting.

Qualifications:

• Proven experience in supervising fire alarm installation or related projects.
• Strong understanding of fire alarm systems, safety codes, and regulations (e.g., NFPA standards).
• Excellent leadership, organizational, and communication skills.
• Ability to manage multiple projects and teams simultaneously.
• Strong problem-solving skills and attention to detail.
• Previous experience in budgeting and resource allocation is preferred.
• Relevant certifications in fire alarm systems or safety are a plus (e.g., NICET).
• Ability to work in both office and field environments, as needed.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for career advancement and professional development.
• A dynamic, supportive, and collaborative work environment.

1. Piping fabrication and installation

2. Underground pipe and above ground piping experience

3. Pipe fit-up and welding include visual inspection

4. Well understood isometric drawing

5. More knowledge on pipe materials and steel structural material

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Assist the Site Manager in developing, implementing and overseeing the Health, Safety and Environment (HSE) programs at the workplace
• Advise site management on statutory HSE rules & regulations
• Be responsible for effective implementation of HSE management system at the workplace
• Enforce and ensure compliance on all HSE policies
• Participate in HSE Audits as well as others Implementation Contractors (IC)
• Organise regular joint HSE inspections with HSE committee &/or client/subcontractor representatives
• Conduct investigations on accidents, dangerous occurrences & any diseases contracted at the workplace
• Prepare and submit HSE reports to the Corporate HSE Department, Project/Site Managers &/or clients
• Liaise with relevant authorities on all HSE matters as required
• Lead and implement Risk Assessment / JSA
• Lead in conducting and implementing Daily Toolbox Talk

Pre-requisites

• Registered WSHO with MOM
• Registered ECO with NEA
• Qualified FSM
• Minimum 3 years of HSE work experience in power/ industrial plant construction projects
• Good working knowledge of Microsoft Office Applications
• Willingness to work in a dynamic construction site environment
• Flexibility to work extended hours or weekends
• Project Location; JURONG ISLAND (Transport provided at designated pick-up points)

NTU Singapore’s faculty openings in the School of Chemistry, Chemical Engineering and Biotechnology

NTU Singapore is in one of the world's most rapidly growing countries. As a beautiful and vibrant nation in Southeast Asia, Singapore attracts top talent from around the globe. NTU Singapore is one of the major universities in Singapore and in the world. It is one of the most creative and innovative universities internationally. NTU Singapore continues to invest in talent, strengthening existing domains and expanding to new and emerging fields. We seek scholars that are committed to pioneering research and have a strong dedication to teaching and mentoring students. The university fosters a dynamic and collaborative community and aspires to address global challenges.

The School of Chemistry, Chemical Engineering and Biotechnology (CCEB) is a unique department at NTU Singapore, advancing cutting-edge education and research in diverse areas of chemistry, chemical engineering, bio(medical)engineering, biotechnology, and other relevant multidisciplinary fields. CCEB invites applications for multiple positions in the general area of Chemical Engineering at all ranks (Assistant, Associate and Full Professor).

We welcome all outstanding candidates with a Ph.D in Chemical Engineering or a related discipline to apply. We offer excellent and competitive start-up packages and salaries.

Candidate applications should include (1) A cover letter and detailed CV, (2) Statement of professional interests and goals in research (up to 5 pages including figures but excluding references), (3) Statement of aspiration in teaching (up to 2 pages), (4) Three selected publications, and (5) Addresses of three or more references who will provide recommendation letters, and are to be submitted to NTU career portal.

CCEB seeks a diverse and inclusive workforce and are committed to equality of opportunity. Applicants, irrespective of race, color, sex, sexual orientation, gender identity, pregnancy, religion, disability, age, genetic information, veteran status, ancestry, or national or ethnic origin, are encouraged to apply.

All applications and enquiries should be addressed to: Prof Shunsuke Chiba ([email protected]), Chair of CCEB.

For more information about NTU Singapore, please visit the NTU website at https://www.ntu.edu.sg.

Please click here to apply.

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

In view of the nature of the role, the job requires the driver to be flexible in the work pattern as one is often on standby throughout the day while waiting for allocation of assignments and adhoc errands.

鉴于该职位的性质，司机需要灵活调整工作模式，因为通常需要全天待命，等待分配任务和临时跑腿。

General Job Responsibilities

Perform driving duties for Managing Director and management staff as and when required. 一般工作职责包括：负责驾驶董事及管理层员工，确保安全及时抵达目的地。

Assist in running errands; not limited to Bank errands, dispatch/ document delivery and collections. 协助处理各类跑腿事务，如银行事务、文件递送和收取等。

Adhoc project materials delivery to site as necessary.

根据需要，将临时项目材料送达现场。

Ensure vehicle is well-maintained and clean at all times. 确保车辆得到良好维护和清洁

Carry out routine inspection and maintenance checks to ensure that vehicle is in good condition at all times. 定期检查和维护车辆，确保其良好运行状态。

Record the mileage and related expenses, ensuring accuracy. 记录行驶里程和相关费用，确保准确无误。

Observe road safety rules and regulations. 遵守道路安全规则和法规。

Other adhoc responsibilities as assigned. 处理与驾驶相关的其他职责，根据需要协助团队。

Requirements

• Relevant Working Experience . 具有相关工作经验
• Possess a valid Class 3 driving license with a good driving record. 拥有有效的3类驾驶执照，并具有良好的驾驶记录。能够驾驶汽车和3类货车进行材料配送
• Familiarity with Singapore roads and landmarks. 熟悉新加坡的道路和地标。
• Willingness to perform overtime hours as needed, including weekends and public holidays. 愿意根据需要加班，包括周末和公众假期。
• Good interpersonal skills and a reliable, responsible attitude. 具备良好的人际交往能力，可靠且负责。
  
  

• Developing and managing marketing technology stacks to ensure seamless execution of campaigns and strategies
• Overseeing and optimizing marketing automation processes to improve workflow efficiencies
• Tracking, analyzing, and reporting on marketing campaign performance to inform strategic decisions
• Managing the marketing budget, ensuring that spending is aligned with strategy and objectives
• Ensuring compliance with data privacy regulations and best practices within marketing operations
• Collaborating with cross-functional teams to align marketing initiatives with sales, product development, and customer service efforts
• Implementing and managing customer relationship management (CRM) systems to enhance customer insights and engagement
• Conducting market research and competitive analysis to stay ahead of industry trends and inform marketing strategies
• Facilitating continuous improvement by identifying and implementing process enhancements within the marketing department
• Training and mentoring marketing staff on best practices, tools, and technologies
• Establishing and maintaining scalable processes that ensure best practices in campaign and lead management
• Coordinating with vendors and third-party service providers to ensure the effective execution of marketing programs and technology utilization

Job Requirements:

• Bachelor's degree in Electrical Engineering, Automation, or a related field.
• Proven experience in industrial automation systems, control circuits, and programming languages such as Python, C, or equivalent.
• Familiarity with industrial communication protocols, fieldbus protocols, MCCBs, contactors, and electrical schematics.
• Strong problem-solving and troubleshooting skills.
• Experience working at stations in overseas locations.
• Willingness and ability to travel and be stationed in developing countries and work in high stress environment and multitask.
• Minimum of 1 year of experience in marine equipment training and work in the marine field.
• Knowledge or experience with Dual Fuel (DF) Engines is a significant advantage.
• Required skills to communicate with customers for Sales and technical assistance.

Job Description:

• Support the implementation and execution of Marine / Industrial Remote Monitoring System projects.
• Perform troubleshooting, maintenance, and repair of electrical systems and circuits.
• Train and assist the overseas team in electrical engineering processes and best practices.
• Provide support for other technical needs as required.
• Assist with IT troubleshooting and maintenance of on-site IT equipment.
• To support the sales activities.
• Expand sales for existing & new customers and product portfolio and Implementing marketing strategies and analyzing trends and results.

• Provide driving service in/out of workshop
• To shift vehicles in and out of workshop for repair and services after registration at counter
• To send vehicle to LTA inspection
• To arrange and park vehicle properly and orderly in docking area
• To conduct road test for vehicle as required
• To assist in handling/taking over of courtesy vehicle
• To assist in checking courtesy vehicle status
• To assist in collection and sending vehicles outside workshop
• To ensure docking area tidiness and cleanliness
• To assist Service Department with adhoc trips such as collection of payment/spares
• To assist in washing/cleaning of Service Department courtest vehicle

Requirements

• Class 3 & 4 Driving License

Mun Siong Engineering Limited is a market leader in turnkey solutions for the Oil & Gas, Petrochemical, Energy, Pharmaceutical & Power industries for more than half a century.

What we offer

We pride ourselves in championing diversity, inclusion, work-life balance, and harnessing technology for a brighter future. For us, sustainability isn't just a buzzword, but a way of life. We also pride ourselves on being at the forefront of environmental responsibility, integrating eco-friendly equipment and practices into everything.

What you'll be doing

• Responsible for processing monthly payroll, overtime claims, allowances, and staff benefit claims.
• Administration of NS, Maternity, Paternity, and Childcare Claims.
• Tracking of attendance records, leave administration, and statutory claims.
• Work with site administration on payroll matters.
• Ability to churn our payroll and HR data-related reports on a regular basis.
• Ensure all payroll processes are aligned with MOM guidelines and internal policies and procedures.
• Ensure timely processing of monthly salary, CPF, FWL, relevant allowances, and contributions to government agencies

We’re looking for

• Min. Diploma / degree in Human Resources or equivalent.
• Min. 3 years of working experience in processing and managing payroll for exempt and non-exempt employees.
• Preferred proficiency in using Unit4 or Prosoft, Time and Attendance software, and Microsoft Excel.
• Good knowledge of Singapore Employment Act and personal income taxation under IRAS.
• Strong proficiency in Microsoft Office applications – Words, Excel, Powerpoint.
• Meticulous, able to work independently and a fast learner with strong organizational skills.
• Self-motivated and able to work under pressure.

• Research, design, and develop new circuits, technology, modules, and devices
• Strategise on architectural and electronic designs, product pipelines, and new potential technology and devices
• Identify, analyse, recommend, and develop next-generation improvements for existing circuits, technology, modules, and devices
• Conduct evaluations and recommend modifications on existing designs and prototypes based on performance in quality test and customer feedback
• Ensure reliable and consistent performance and function of existing designs for circuits, technology, modules, and devices in operating environments
• Perform circuit analysis, run simulations, create schematic drawing and PCB layouts, and produce wiring programs using respective softwares
• Design, develop, and execute testing and investigation methods / procedures for circuits, technology, modules, and devices with the use of Automated Test Equipment (ATE)
• Prepare engineering sketches and specifications, design and test documentation, product specification or Bill of Materials (BOM), and product development timeline
• Coordinate with relevant teams to ensure design manufacturability and testability
• Keep updated on technology and regulation development

Requirements:

• Good understanding of electrical engineering codes, electronic systems, component materials and safety standards
• Possess hands-on experience using design and calculation software
• Strong analytical, problem solving and conceptualisation ability
• Strong interest in technology
• Ability to think outside the box and manage complexity
• Strong team player and customer-oriented with strong interpersonal and communications skills
• Proactive, enthusiastic with “can do” attitude
• Meticulous, self-reliant and strong sense of urgency
• Committed, motivated and able to handle multiple tasks simultaneously

Position: Drafter

Roles & Responsibilities

· Prepare shop drawings , fabricate drawing , As-built drawings

· Model development, construction, documentation and production techniques

· Assist in general quantity surveying duties such as pre/post contract duties, taking-off quantities, cost control, variations, finalization of cost and tender administrative duties and Material Inquiries & procurement.

· Monitor the site progress, and confirms sub-contractors, vendors and supplier’s obligations.

Requirements:

· Diploma in construction-related , civil engineering field

· Good Communications skill

· Knowledge of structural will be beneficial

· Academic in relevant structure steel , building/engineering

· Familiarize in all construction trades and practical aspects of architectural joinery works an advantage

· Proficiency in Tekla Software , Autocad

· Able to work on Multiple projects, Within simultaneous timeline

· Highly motivated Responsible & team player with good interpersonal skill

· Working Hour: Mon-Fri (9am to 6pm) , Sat (Half Day)

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Handle daily accounting operational functions
• Responsible for AR & AP functions
• Perform verification with vendors on change of vendors’ information
• Ensure accuracy and reliability of accounting data and transaction in SAP system
• Assist in banking and treasury function
• Perform month end and year end closing of accounts
• Perform administrative and coordination work for finance department
• Prepare monthly accounts reconciliation
• Any other duties assigned from time to time

Prerequisites:

• Diploma or Degree in Accounting or equivalent
• Ability to produce accurate and quality work within tight deadlines
• Ability to learn and adapt
• Conversant in Microsoft Excel
• Knowledge in SAP

NTU Singapore’s faculty openings in the School of Chemistry, Chemical Engineering and Biotechnology

NTU Singapore is in one of the world's most rapidly growing countries. As a beautiful and vibrant nation in Southeast Asia, Singapore attracts top talent from around the globe. NTU Singapore is one of the major universities in Singapore and in the world. It is one of the most creative and innovative universities internationally. NTU Singapore continues to invest in talent, strengthening existing domains and expanding to new and emerging fields. We seek scholars that are committed to pioneering research and have a strong dedication to teaching and mentoring students. The university fosters a dynamic and collaborative community and aspires to address global challenges.

The School of Chemistry, Chemical Engineering and Biotechnology (CCEB) is a unique department at NTU Singapore, advancing cutting-edge education and research in diverse areas of chemistry, chemical engineering, bio(medical)engineering, biotechnology, and other relevant multidisciplinary fields. CCEB invites applications for multiple positions in the general area of Chemical Engineering at all ranks (Assistant, Associate and Full Professor).

We welcome all outstanding candidates with a Ph.D in Chemical Engineering or a related discipline to apply. We offer excellent and competitive start-up packages and salaries.

Candidate applications should include (1) A cover letter and detailed CV, (2) Statement of professional interests and goals in research (up to 5 pages including figures but excluding references), (3) Statement of aspiration in teaching (up to 2 pages), (4) Three selected publications, and (5) Addresses of three or more references who will provide recommendation letters, and are to be submitted to NTU career portal.

CCEB seeks a diverse and inclusive workforce and are committed to equality of opportunity. Applicants, irrespective of race, color, sex, sexual orientation, gender identity, pregnancy, religion, disability, age, genetic information, veteran status, ancestry, or national or ethnic origin, are encouraged to apply.

All applications and enquiries should be addressed to: Prof Shunsuke Chiba ([email protected]), Chair of CCEB.

For more information about NTU Singapore, please visit the NTU website at https://www.ntu.edu.sg.

Please click here to apply.

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

Work Location: 8 Tuas Avenue 18, Level 5, Singapore 638892 (Company bus at 0800hrs Tuas Crescent MRT Exit B bus stop)

Working Hours: Monday to Friday: 08:30 AM - 05:30 PM

• Prepare monthly group consolidated cashflow for the risk assessment on the group cashflow
• Monitor bank service fees and address quality issues
• Manage and strengthen banking relationships
• Review the banking facilities on new requirements and rates competitiveness
• Preparing Trade Finance & Hire Purchase submission
• Handling of Shipping documents and discrepancies
• Managing opening & closing of bank account, update of bank signatories and bank token management
• Prepare and coordinate board resolution and minutes for all finance related matters
• Managing FX hedging and borrowing rates
• Ensure adequacy for banking facilities to cater for business expansion
• Collate P&L and BS analysis to track and ensure compliance of bank covenants
• Prepare and submit monthly treasury report to GM Finance
• Any other tasks/projects assigned by immediate supervisor

Requirements

• Bachelor’s degree in Finance or Accounting is required
• 3 years relevant treasury working experience particularly in cash management and hedging management
• Prior experience in FX trades
• Analytical and meticulous
• Possess good communication and interpersonal skills
• Possess good quantitative skills, have financial modelling and advanced working knowledge in MS Excel
• Driven, independent individual who adapts well in a fast-paced environment
• Strong knowledge in investment portfolio strategy, banking, and financial instruments

Shortlisted candidates to bring along completed job application form, resume and academic certificates to interview

Responsibilities:

• Provide overall administrative support to ensure smooth running of Admin & HR Department
• Work closely with Project Team and provide HR & administrative support for Manpower allocation, worker accommodation arrangement, and etc.
• Handle all insurance policies and claims matters eg. Group H & S Insurances, Workmen Compensation Insurance and WICA claims
• Handle on-boarding and off-boarding process
• Plan, organize and oversee the execution of training programs.
• Update and maintain the list of Company’s Track Records for BCA renewal submission
• Keeping up with updates or revisions in ISO standards and handle ISO Certification auditing
• Maintain an up-to-date record of all company vehicles.
• Manage COE renewals, road tax payments, and insurance policies.
• Coordinate Company events on special occasions.
• Other ad-hoc duties as assigned by HR & Admin Manager

Requirements:

• Degree / Diploma in Human Resource, Business Administration or related discipline
• 2-3 years working experiences
• Good knowledge of Microsoft Excel, Words
• Willing to learn, meticulous and able to work under pressure

• Design & model 3D skid system, skid structure, piping GA and other not mentioned shop drawing (cutting plan) for fabrication purpose.
• Maintain proper record for drawings and information.
• Proficient in operating CAD drawings software and drawing construction detailed design.
• Create drawings and models from written and verbal specifications obtained from Engineer.
• Reviewing and checking sketches and drawings for errors before being sent to productions, vendors, engineers, etc.
• Review drawings for completeness and accuracy.
• Systematically saving sketches and drawings on CAD library, keeping the server organized; updating files as jobs progress and revisions are made.
• Continually create, edit, and update standard details for use in projects.
• Complete task assigned by superior and performing other relevant duties when needed.

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 8-12 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

Min Qualifications / Experience :

Bachelor Degree in Mechanical Engineering with minimum 3 years relevant experience

Job Skills Required :

Mechanical design of pressure vessels, heat exchagers & atmospheric storage tanks. Thermal design of heat exchangers is also a required skill.

Familiar with international design codes such as ASME, British, Australian & European Codes, Tema, API650 & etc.

Proficient in design software such as PVELite, NozzlePro, StaadPro & Autocad.

Duties & Responsibilities

The duties and responsibilities are:

a) Responsible for the formulation of schedules and datelines for design and date of submission.

b) Check detailed design and drawings based on relevant codes and client specifications, while ensuring the most cost efficient methods of design are used.

c) Liaise and co-ordinate with Project Department to obtain relevant information for detailed design.

d) Determine the conditions and study all pertaining data thoroughly and accurately for a design. Many different combinations of loadings are possible and the most probable combination of simultaneous load for an economical and safe design is selected.

e) Control and issue all technical documents.

f) Any adhoc project assigned by Design Manager.