Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description & Requirements

• Perform general electrical maintenance including troubleshooting and repairing malfunctioning equipment.
• Identify the root cause and conduct analysis to generate solutions.
• Ensure completion of all protective maintenance duties are following the safety standards that complying with company policy.
• Install improvements and major upgrades to process system.
• Provide engineering support in project or plant maintenance
• Alert the Engineer Managers of any unusual incident that have taken place.
• Monitor the equipment process and prevent the equipment breakdown.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Requirements:

• Good interpersonal and communication skill
• Work independently
• Attention to details
• Good problem solving and observing skills

* To provide mechanical engineering design expertise during the detailed design phase

* Will be involved in all aspects of the mechanical engineering design and installation supervision

* Engineering package development for cogeneration, flue gas treatment, pressurized equipment, pump, fan, piping etc.

* To prepare tender documents, b i d analysis, operating & maintenance procedures, mechanical drawings and piping layout.

* Assist in the assessment of construction costs, maintenance cost, and safety studies.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

Our company is looking for a Quality Assurance / Management Representative who will perform the following tasks:

• Manage the company's ISO9001:2015 and ISO45001:2018 systems by leading both internal and external audits.
• Monitor and analyze the company's quality and safety performance through the action plans in place.
• Keep abreast of the government requirements as well updates on the standards to ensure compliance of the company's systems and policies.
• Ensure that all statutory licenses, certificates, and inspections of the company's equipment and machinery are valid and up to date.
• Manage and monitor the company's measuring equipment and devices to ensure that they are calibrated as per the required standard of the products.
• Liaise with all external stakeholders such as government bodies (MOM, BCA, SCDF, etc) with regards to company's operation and compliance.
• Communicate with existing customers on their regular audits, non disclosure agreements, and additional requirements which may affect the company's status of being an approved vendor.
• Assist project engineers in securing Certificate of Origin (COO) and / or Preferential Certificate of Origin (PCO) for products.
• Analyze the applicable tariff to be applied for free trade agreement (FTA) purposes.

OceanSTAR Elite Group is a leading provider of innovative solutions in the oil and gas and marine energy sectors, with a strong focus on FPSO (Floating Production Storage and Offloading) projects. We are committed to delivering cutting-edge engineering services that drive operational excellence and sustainability.

We are currently seeking a skilled Electrical Engineer to join our team and support the design, operation, and maintenance of electrical systems on FPSO vessels.

Key Responsibilities

Position: Project Supervisor – Fire Alarm Projects
Location: Singapore
Company: WENG ENGINEERING PTE LTD.
Job Type: Full-time
Salary: Competitive + Benefits

About Us:
We are a provider of fire protection, fire alarm systems and safety solutions. We specialize in delivering high-quality, reliable, and compliant fire alarm systems to commercial and residential properties. As we continue to grow, we are looking to expand our team and are seeking a highly motivated and experienced Project Supervisor to manage our fire alarm projects.

Job Description:
As a Project Supervisor for Fire Alarm Projects, you will be responsible for overseeing the successful installation, maintenance, and servicing of fire alarm systems. You will manage the day-to-day operations of fire alarm projects, ensuring they are completed on time, within budget, and in compliance with safety standards and regulations.

Key Responsibilities:

• Supervise and lead a team of technicians and installers during fire alarm projects.
• Plan, coordinate, and schedule fire alarm installation and maintenance work.
• Ensure compliance with all local fire safety regulations, standards, and codes.
• Manage project budgets, timelines, and resources effectively.
• Communicate with clients to provide updates, address concerns, and ensure satisfaction.
• Conduct site inspections and monitor the quality of work to ensure the highest standards.
• Troubleshoot and resolve technical issues as they arise during the project lifecycle.
• Maintain accurate documentation of project progress, inspections, and reporting.

Qualifications:

• Proven experience in supervising fire alarm installation or related projects.
• Strong understanding of fire alarm systems, safety codes, and regulations (e.g., NFPA standards).
• Excellent leadership, organizational, and communication skills.
• Ability to manage multiple projects and teams simultaneously.
• Strong problem-solving skills and attention to detail.
• Previous experience in budgeting and resource allocation is preferred.
• Relevant certifications in fire alarm systems or safety are a plus (e.g., NICET).
• Ability to work in both office and field environments, as needed.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for career advancement and professional development.
• A dynamic, supportive, and collaborative work environment.

1. Piping fabrication and installation

2. Underground pipe and above ground piping experience

3. Pipe fit-up and welding include visual inspection

4. Well understood isometric drawing

5. More knowledge on pipe materials and steel structural material

Job Description

• Provide excellent support experience to customers via all relevant communication channels.

• Ensure effective follow-up with internal and external stakeholders to ensure invoicing closure in accordance to our service standards.

• Provide constructive feedback on tools, resources, procedures and guidelines to enhance workflow and customer experience.

• Prepares the necessary paperwork, such as quotations and delivery orders .

• Follows up on outstanding enquiries, back orders and customers’ payments.

• Liaise with Warehouse for order picking and readiness.

• Assist and liaise with Customers on their Ad hoc requirements.

• Other ad-hoc duties/tasks assigned by superior.

Job Requirement

• Minimum Polytechnic Diploma, or an equivalent qualification

• At least 1 year of experience in sales administration or customer service

• Strong interpersonal skills with the ability to manage multiple tasks in a fast-paced environment

• Proficiency in Microsoft Office applications, particularly Word and Excel

• A team player with a strong work ethic and a proactive attitude

• Ability to work efficiently under pressure and meet deadlines

• Exceptional attention to detail and commitment to accuracy

Job Description & Requirements

· Ensuring all works carried out meet company’s quality standards and requirements

· To co-ordinate and supervise site workers, monitoring project progress and schedule

· To liaise closely with appointed Main-contractors, sub-contractors and suppliers or their appointed agents on all on-site matters

· Ensure all works are carried out in accordance to the drawings, specifications, construction plan, procedures, work instructions etc

· Ensure compliance with the prevailing legislative Work Safety rules and/or measures

· Assist Engineering and Production Team with the preparation and submission of documents for work commencement and upon project completion

· Other ad-hoc duties assigned from time to time

Job Requirements :-

· Minimum 5 years supervisory experience in aluminium industry

· Able to understand design drawings and meet clients &/or designers requirements

· Meticulous with positive work attitude

· Strong sense of accountability and ability to quickly prioritize tasks based on urgency in a fast placed environment

· Excellence analystical, communication, organizing, interpersonal and supervisory skills

· Independent but also a team player

· Able to start work on short notice would be an advantage

Job description:

· Responsible for organizing, supervising, and directing project construction activities to successfully meet project specifications and schedules as Contractor’s principal representative to Owner at the jobsite.

· Forms preliminary construction plans including organization, staffing, and administration, subject to review by the Project Manager.

· Studies specifications to plan construction procedures; monitors procurement of equipment and materials to be delivered to conform to work schedules.

· Finalizes assignment of field construction personnel and mobilization plan of manpower; assembles members of organization at the start of the project.

· Authorizes work and services to be purchased from outside sources or subcontracted at the jobsite in accordance with construction policy and project economics.

· Confers with or directs supervisory personnel and subcontractors engaged in planning and executing work procedures, interpreting specifications, and coordinating various phases of construction to prevent delays.

· Authorizes the field construction schedule and field construction procedures to ensure good workmanship, safe construction, and on-schedule performance.

· Acts as liaison between Contractor and Owner’s representatives in the interpretation of specifications.

· Receives from subordinates’ reports on progress, materials, manpower, and costs, and directs the work schedule.

· Inspects work in progress to ensure that workmanship conforms to specifications. Develops new construction methods to satisfy unusual circumstances and changes from the original plan.

· Approves jobsite expenditures for labor and services by reviewing cost records, workmanship, material quality and quantity, scheduling, and procurement.

· Approves Safety procedures for all site workers to abide.

Requirements:-

• Diploma or Degree holder in Engineering field
• 5 years’ experience least in oil & gas, chemical construction industry
• Experience in executing construction in process/petrochemical plants and storage terminals
• Degree holder in relevant major
• Independent, resourceful, diligent and good team player.
• Able to lead supervisors & workers to comply, fulfil projects requirements, meeting schedules.
• Expected to perform hands-on duties with acquired skills and knowledge.

Responsibilies:

- Familiar with documents submission to relevant government authorities

- Responsible for measuring quantities and taking off

- Prepare Variation Orders, monthly Progress Claims, final claims

- Prepare and submit Material submission form to client for approval

- Attend site meeting when necessary

- Prepare Tender and contract documents, including bills of quantities with the architect and/ or client

- Perform risk, value management and cost control

- Prepare and analyze costings for tender

- Allocate work to subcontractors

- Provide advice on contractual claims

- Understand the implications of health and safety regulations

- Identify, analyze and develop responses to commercial risks

- Undertake cost analysis for repair and maintenance project work

- All other QS related job

Qualifications:

- Diploma/ Degree in Constructions Building or its equivalent

- Ability in contract negotiation, contract administration and variations orders

- Able to work independently, analytical with excellent problem solving skills, proactive.

- Knowledge of AutoCAD, MS Excel, MS Word

- Possess knowledge in Cubi cost software OR any other relevant software will be an added advantage

- Possess minimum Diploma/Degree in Quantity Surveying / Electrical / Mechanical or its equivalent with 1- 2 years of relevant experience

- Able to start in a short notice period

With the following information in your resume

• Current and Expected salary
• Reason for leaving
• Date of availability
• Education
• Work experiences and job responsibilities background

We regret that only shortlisted candidates will be contacted

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. It performs translational research that covers the energy value chain from generation to innovative end-use solutions, motivated by industrialisation and deployment.

In 2021, Enterprise Singapore, the national standards body for Singapore, had appointed ERI@N as a Standards Development Organisation (SDO) to develop and promote standards under the Electrical and Electronic Standards Committee. This includes standards supporting emerging areas such as renewables -offshore wind/marine & solar energy, secondary batteries and cells, solid state transformers, electrical energy storage systems, and smart grids. We also work with regulators and the industry on standards for electrical installations, building & services and safety and effectiveness of electrical products and services.

We are looking for a passionate Project Manager to support the work of the SDO.

Core expertise:

Project management responsibilities include managing the identification, development and promotion of standards meeting key requirements set by Enterprise Singapore (EnterpriseSG). These include supporting standards committees under the management of ERI@N in their standard development and promotion work to ensure timely and successful delivery of new and reviewed standards. The PM should have a background in business skills, project management, budgeting, analysis and stakeholder management. Familiarity with key technologies such as power systems, electronics, solar PV, battery systems and electrification as well as understanding of commercialization is an advantage.The PM must be detail oriented, able to multitask and demonstrate the ability to be intervene decisively and proactively.

Key Responsibilities:

Standards development

• Support standards committees to identify key areas for standards development from FY 2024 to FY 2026 which includes meetings with key stakeholders and preparing new work proposals.
• Support standards committees to develop standards within the timelines and quality requirements set by EnterpriseSG and the industry. These will include managing the preparations for meetings, capturing key comments, discussions and edits, conducting public consultations, addressing public comments, preparing draft standards for publications.
• Support the standards committee leaders in managing key stakeholders within the committee and industry with aim to build consensus and address standards implementation issues.
• Support participation of standards partners in international standardization including balloting, international meetings and hosting ISO/IEC TC meetings in Singapore.

Standards promotion

• Work with standards committees and EnterpriseSG to plan and execute standards promotions events targeting key stakeholders such as industry, government agencies and regulators, research bodies and the public. This could include standards launches, case studies, seminars and workshops. The PM is also expected to develop suitable presentation materials for these events.
• Work with standards committees and EnterpriseSG on verification studies to quantitatively evaluate the adoption of standards by key stakeholders.

SDO administration

• Assist Head, SDO and colleagues to manage the SDO budget to ensure budget marksmanship are met.
• Ensure procurement guidelines for EnterpriseSG and NTU are complied with.
• Assist Head, SDO in preparation of SDO progress reports to EnterpriseSG, the Singapore Standards Council and ERI@N management.
• Assist Head, SDO in audits concerning the operations and financial issues of the SDO.

Job Requirements:

Competencies and Qualifications

• Bachelor’s Degree in Electrical Engineering/ Computer Science / Mathematics/ Physics
• Min. Years of Experience: 3 years for project manager.
• Entry level candidates are welcomed to apply but will receive title of Project Officer.
• Certified Project Management Professional (PMP) will be an advantage
• Working Knowledge in Agile Project Delivery
• Working Knowledge in Microsoft Project, Excel, Word, Power point, SharePoint
• Experience within the utility or energy and power system industry is a strong advantage
• Excellent Stakeholder management

Added advantage:

• Experience in adopting or implementing standards
• Experience in Interactive Project Management tools like Click up, JIRA.
• Experience in document management tools like SharePoint
• Experience in R&D cross-functional New Product/Technology Introduction (NPI/NTI) programs & commercialization

Other Requirements:

• Excellent written and verbal communication skills
• An effective and efficient team player with good attitude and interpersonal skills
• Self-motivated for documentation maintenance and management

We regret that only shortlisted candidates will be notified.

• Assisted the manager in the day-to-day operations of the production lines.
• Plans and coordinates the workflow on the production lines to achieve production targets according to agreed-upon schedules and quality standards.
• Draws up a duty roster for operatives, allocating work and arranging replacements for absentees.
• Troubleshoots production problems that may arise and assists the Production Manager in planning new project work, such as positioning new production lines or machinery.
• Trains motivates and guides subordinates maintains discipline among the operatives, and provides input to their performance appraisals.
• Report directly to the Assistant Production Manager / Production Manager.
• Champions cost-saving ideas through implementation.
• Establish work standards/workflow to comply to stipulated and safety requirements.
• Any other tasks as and when assigned by the management.

REQUIREMENTS:

• Minimum 2 years experience in the relevant position
• Possess good communication skills and good time management
• 5s experience will be an advantage
• Able to start work on short notice

We're Hiring: Project Coordinator for Renovation Projects

Responsibilities

· Monitor strict compliance of “Permit to Work” system at worksite & explain the importance to workers at the time of safety talk/toolbox meeting.

· Coordinate Environmental Control Committee Meeting and implement all environmental control programs.

· Maintain mandatory records and other documentation as required by the regulatory authorities.

· Ensure compliance of operations with NEA and EHS regulations

· Prepare Site Environmental Control Report on a regular basis

· Conduct environmental control audit and investigations

· Able to maintain environmental requirements in line with OHSAS 18001:1999

· Ensure compliance with environmental regulations, develop environmental control plan, site clean-up plans & monitor their completion

· Advise and liaise with Project Manager and construction team on all matters pertaining to Health, Safety & Environment (HSE)Ensure compliance and practice of Company's QEHS Management System

· Oversee and lead the Safety team & subcontractors in the implementation of Company’s safety systems at sites

· Inspect and examine the workplace to ensure workplace safety compliance

· Identify safety, environmental health non-compliance and recommend measures to rectify

· Liaise with authorities and clients on matters pertaining to environmental, workplace safety issues

· Conduct & organize internal / external WSH trainings for staffs.

· Conduct incident investigations & propose corrective actions.

· Review OHSMS and provide recommendations for improvement of safety.

· Conduct regular inspection and audits on the safety provisions.

· Conduct, review & submit Risk Assessments.

· Prepare safe work procedures for site activities.

Requirements:

· Registered ECO & ECMO with NEA and PUB in Singapore

· Experienced in Construction Projects in Singapore as full time.

· Experience in managing a construction site Earth Control Measure

· Noise monitoring certificate

· Willing to work West Area.

· Good Communication Skills in reading, writing, and speaking

Roles & Responsibilities

• Manage construction activities to make sure that compliance with cost, time, contract specification, health and safety, quality and environmental requirements are achieved; manage the delvelopment and implementation of programmes associated with project plans.
• Oversee and direct construction projects from conception to completion.
• Participate in the evaluation of the suitability of subcontractors.
• Review the project in-depth to schedule deliverables and estimate costs.
• Liaise with subcontractors and other service providers in relation to programmes and workmanship.
• Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations.
• Coordinate and direct construction workers and subcontractors.
• Ensure quality construction standards and the use of proper construction techniques.
• Liaise with the safety personnel to undertake risk assessment and develop suitable control methods.

Job Requirements

• Minimum 12 years of engineering experience with Degree in Civil Engineering recognised by the PE Board or qualification acceptable to the Commissioners of Building Control as eligible for application as a Resident Engineer or recognised Degree in relevant field subject to the acceptance of the Engineer.
• At least 10 years of experience in managing construction teams for projects of similar scale and complexity.
• Competent in conflict and crisis management.
• Leadership and human resources management skills.

Skills and Knowledges

• Leadership and project management skills.
• Persistence and determination.
• Able to use your initiative.
• Excellent verbal communication skills

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 1 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

· Liaise with sub-contractors, suppliers & other parties involved in the project.

· Liaise with construction/design team to prepare document for Request for Quotation (RFQ) or Open Tender.

· Assist Project Contract Manager with quantity surveying matters relevant to Sub-Contract, Works Order and Purchase Order.

· Project administration and documentation include preparation of interim valuations, pricing and agreement of contract variations, update claim submissions, preparation of final accounts.

· Sourcing for supplier and sub-contractor, collate price comparison and costing summary.

· Evaluation and certification of sub-contractors’ progress payments.

· Good knowledge of reading specifications and building drawings.

· Prepare project budgeting and costing reports.

Requirements

· At least 3 years’ working experience in Quantity Surveying in main contractor.

· Experience with LTA or M&E projects.

· Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Quantity Survey, Civil Engineering / M&E.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience
• Site Location West Region

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Assist the Site Manager in developing, implementing and overseeing the Health, Safety and Environment (HSE) programs at the workplace
• Advise site management on statutory HSE rules & regulations
• Be responsible for effective implementation of HSE management system at the workplace
• Enforce and ensure compliance on all HSE policies
• Participate in HSE Audits as well as others Implementation Contractors (IC)
• Organise regular joint HSE inspections with HSE committee &/or client/subcontractor representatives
• Conduct investigations on accidents, dangerous occurrences & any diseases contracted at the workplace
• Prepare and submit HSE reports to the Corporate HSE Department, Project/Site Managers &/or clients
• Liaise with relevant authorities on all HSE matters as required
• Lead and implement Risk Assessment / JSA
• Lead in conducting and implementing Daily Toolbox Talk

Pre-requisites

• Registered WSHO with MOM
• Registered ECO with NEA
• Qualified FSM
• Minimum 3 years of HSE work experience in power/ industrial plant construction projects
• Good working knowledge of Microsoft Office Applications
• Willingness to work in a dynamic construction site environment
• Flexibility to work extended hours or weekends
• Project Location; JURONG ISLAND (Transport provided at designated pick-up points)

Position: Drafter

Roles & Responsibilities

· Prepare shop drawings , fabricate drawing , As-built drawings

· Model development, construction, documentation and production techniques

· Assist in general quantity surveying duties such as pre/post contract duties, taking-off quantities, cost control, variations, finalization of cost and tender administrative duties and Material Inquiries & procurement.

· Monitor the site progress, and confirms sub-contractors, vendors and supplier’s obligations.

Requirements:

· Diploma in construction-related , civil engineering field

· Good Communications skill

· Knowledge of structural will be beneficial

· Academic in relevant structure steel , building/engineering

· Familiarize in all construction trades and practical aspects of architectural joinery works an advantage

· Proficiency in Tekla Software , Autocad

· Able to work on Multiple projects, Within simultaneous timeline

· Highly motivated Responsible & team player with good interpersonal skill

· Working Hour: Mon-Fri (9am to 6pm) , Sat (Half Day)

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Handle daily accounting operational functions
• Responsible for AR & AP functions
• Perform verification with vendors on change of vendors’ information
• Ensure accuracy and reliability of accounting data and transaction in SAP system
• Assist in banking and treasury function
• Perform month end and year end closing of accounts
• Perform administrative and coordination work for finance department
• Prepare monthly accounts reconciliation
• Any other duties assigned from time to time

Prerequisites:

• Diploma or Degree in Accounting or equivalent
• Ability to produce accurate and quality work within tight deadlines
• Ability to learn and adapt
• Conversant in Microsoft Excel
• Knowledge in SAP

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.