As a Project Engineer, you will be responsible for managing the entire project lifecycle for plumbing and sanitary installations, ensuring that projects are delivered on time, within scope, and on budget. You will work closely with clients, contractors, suppliers, and internal teams to ensure smooth execution and adherence to high-quality standards.

Key Responsibilities:

1. Project Planning and Execution: Plan, execute, and oversee all plumbing and sanitary project activities from inception to completion.
   Develop detailed project plans, schedules, and budgets, ensuring realistic timelines and cost-effective solutions.
   Coordinate with engineers, architects, and other stakeholders to ensure project requirements are clearly defined and met.
   Ensure compliance with all local building codes, regulations, and industry standards.
   Monitor and evaluate project progress, making necessary adjustments to keep the project on track.
   
2. Team Leadership and Supervision:Lead and manage a team of technicians, subcontractors, and laborers, ensuring smooth project execution.
   Conduct regular site inspections to ensure adherence to safety protocols and quality standards.
   Provide direction and guidance to on-site staff, resolving issues and offering solutions to challenges that arise during project execution.
   
3. Client Management:Serve as the primary point of contact for clients, providing regular updates on project status, timelines, and budgets.
   Address client concerns and inquiries promptly and professionally, ensuring a positive customer experience.
   Build and maintain strong client relationships, ensuring their needs are met and customer satisfaction is maintained throughout the project.
   
4. Budget and Resource Management:Prepare and manage project budgets, ensuring that projects are completed within budget constraints.
   Procure materials and manage inventory to ensure timely availability of resources, avoiding delays and cost overruns.
   Track project expenses and implement cost-saving initiatives, without compromising on quality or safety.
   
5. Risk Management and Problem Solving:Identify potential project risks and develop proactive mitigation strategies to minimize delays and disruptions.
   Resolve any issues or challenges that may arise, including design changes, delays, and unforeseen obstacles.
   Maintain a proactive approach to problem-solving and continuously improve project execution processes.
   
6. Reporting and Documentation:Maintain accurate and up-to-date project documentation, including contracts, change orders, progress reports, and safety records.
   Provide regular progress reports to senior management and clients, keeping all stakeholders informed of key developments.
   Ensure the timely submission of invoices, accurate tracking of payments, and clear financial documentation.
   

Requirements:

Education:

• Bachelor's degree in Engineering, Construction Management, or a related field (or equivalent experience).

Experience:

• Minimum of 2 years of experience in project management, preferably in the plumbing, sanitary, or construction industry.

Skills:

• Strong knowledge of plumbing systems, sanitary installations, and construction processes.
• Proficiency in project management software (e.g., MS Project, Procore, etc.).
• Excellent communication, negotiation, and leadership skills.
• Ability to manage multiple projects simultaneously while adhering to deadlines.
• Strong problem-solving and decision-making abilities.
• Solid understanding of budgeting, cost control, and resource management.

Certifications:

• PMP (Project Management Professional) certification or similar is a plus.

Physical Requirements:

• Ability to visit construction sites regularly and perform site inspections.
• Ability to work in varying environmental conditions (outdoors, construction sites, etc.).

About Us:
We are a local specialist in Plumbing and Sanitary solutions, Auto Irrigation, and Rainwater Harvesting systems. With a commitment to delivering high-quality and sustainable solutions, we serve a diverse range of industries and customers. We are looking for a dynamic and results-driven Sales Engineer to join our team and contribute to the growth of our projects, product sales, and maintenance contracts in these specialized fields.

Job Description – Sales Engineer

As a Sales Engineer, you will be responsible for generating sales for projects, products, and maintenance contracts within the auto irrigation, rainwater harvesting, and plumbing & sanitary sectors. You will manage the full sales cycle—from site visits and designing solutions to proposal generation, quoting, and handing over the project to the operations team.

Key Responsibilities:

• Sales Target Achievement: You will be given a clear, realistic sales quota for both projects, product sales, and maintenance contracts. Achieving and surpassing your quota will be key to your success. The quota will be discussed transparently during the interview process and is tailored to market conditions and industry standards.
• Site Visits & Assessments: Conduct on-site visits to assess client needs and project requirements, providing expert recommendations on the most suitable solutions. Travel expenses (including fuel and accommodation if necessary) will be fully reimbursed by the company.
• Design and Proposal Generation: Collaborate with the technical team to create system designs and generate detailed proposals and quotations for clients, ensuring they are tailored to client specifications and budget.
• Client Relationship Management: Maintain strong relationships with clients throughout the sales process, from initial contact to project handover. You will serve as the primary point of contact for any queries or concerns, ensuring their satisfaction and continued business.
• Project Handover: Work closely with the operations team to ensure a smooth transition of the project details for execution, ensuring all technical specifications are met.
• KPI Management: Achieve key performance indicators (KPIs), focusing on sales targets for projects, product sales, and maintenance contracts. Regular reviews will be conducted to track your progress and ensure support for your success.
• Market Research: Stay informed about industry trends, competitor offerings, and new technologies. Leverage this knowledge to identify opportunities and maintain a competitive edge in the market.

Key Skills and Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field, or equivalent experience in a technical sales environment.
• Proven sales experience within the auto irrigation, rainwater harvesting, or plumbing & sanitary industries. Experience in designing or engineering such systems is a plus.
• Excellent communication and negotiation skills, with the ability to clearly explain technical concepts to clients and negotiate deals effectively.
• Strong problem-solving abilities, with a results-driven mindset and a proven track record of meeting or exceeding sales targets.
• Proficiency in Microsoft Office and sales management software. Familiarity with proposal generation and project management processes is essential.
• Ability to manage multiple projects and clients simultaneously in a fast-paced, deadline-driven environment.

Preferred Qualifications:

• Experience in maintenance contract sales is a plus.
• Strong local industry network and familiarity with the market.

Compensation Package:

• Base Salary: Up to $3,000 per month, based on experience. The salary will be discussed during the interview process.
• Commission: Performance-based commission for sales beyond the minimum sales quota. Commission rates will be provided clearly upon hire.
• Incentives: Additional performance-based incentives for meeting sales targets and securing long-term contracts. These incentives are designed to reward top performers.
• Travel Expenses: All travel costs related to site visits, including fuel, accommodation, and other expenses, will be reimbursed.
• Other Benefits: Comprehensive benefits package, including [e.g., healthcare, annual leave, etc.]. Further details will be discussed during the interview.

Why Join Us?

• Clear Career Growth: Opportunities for career advancement based on performance, with potential to grow into more senior roles. You will be mentored and supported by leadership, with regular performance reviews to ensure career progression.
• Diverse & Impactful Projects: Work on innovative and sustainable projects that make a difference in the industry. You’ll be involved in a range of projects across different sectors.
• Supportive Team Environment: Collaborate with a dynamic and experienced team of experts in plumbing, irrigation, and rainwater harvesting, providing ample opportunities for learning and professional growth.
• Competitive Salary & Benefits: Competitive base salary, along with a commission structure and incentives that reward success.

How to Apply:
If you are a driven and passionate Sales Engineer with a technical background and a strong sales acumen, we would love to hear from you. Please submit your resume and cover letter to [insert application email or link].

Additional Notes:

• Sales Quota: We understand that sales targets need to be achievable, and we will ensure that your quotas align with market realities. These will be clearly communicated during the interview process and adjusted based on your experience and the specific market conditions.
• Support for Design and Proposals: You will work closely with our technical team to ensure you have the right tools and support for creating accurate designs and proposals. The company is committed to providing the resources necessary to help you succeed in the sales process.

'We are seeking a dedicated and knowledgeable Service Engineer to oversee the operation on-site. The role involves ensuring that vehicles are maintained according to contract requirements and managing day-to-day operations efficiently.

Job Description:

- Oversee the operation on-site, ensuring efficient use and allocation of resources.

- Ensure that vehicles are maintained according to contract requirements.

- Monitor team performance to optimize operations.

- Schedule and coordinate regular maintenance and repair work for vehicles to ensure safety and reliability.

- Maintain records of all maintenance activities, repairs, and inspections.

- Organize and maintain physical and digital files, ensuring that important documents are easily accessible.

- Ensure that all vehicles comply with safety and emissions standards.

- Stay updated on changes in regulations and adjust fleet operations accordingly.

- Coordinate training and development programs to enhance skills and safety.

- Analyse fleet performance data to identify trends, inefficiencies, and areas for improvement.

- Prepare reports for management on fleet performance, costs, and compliance.

- Implement safety protocols and policies to minimize accidents and incidents.

- Conduct risk assessments and address any identified risks related to fleet operations.

Job Requirements:

- Proven experience in fleet management or vehicle maintenance, preferably in a similar role.

- Good understanding of safety regulations and compliance standards.

- Excellent organizational skills and attention to detail.

- Strong communication and interpersonal skills to work effectively with team members and management.

- Ability to work independently and manage multiple tasks effectively.

Contract Type:

- This position is a 2-year contract with the possibility of permanent employment based on performance and business needs.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 5 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe,

the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology

and innovation to solve real-world problems and improve lives. Our dedication to excellence and our

strong track record have earned us a distinctive reputation for quality and trust as a global technology,

defence and engineering group, spanning across the aerospace, smart city, defence and public security

segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the

Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic

suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries,

critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep

domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity

engineering, digital authentication, SCADA protection, audit and compliance.

Tasks description

• Job Opening, Job Amendment, Sales Confirmation, Cost Transfer, Job Closing, Billing

• Treasury / Hedging

• Inventory

• Month end closing/ Reporting on CACL (Current Assets/ Current Liabilities)

• Projects incl ERP Harmonization/ Continuous Improvement/ Automation

• Ad hoc projects as assigned

Tasks Delivery

• Deliver task on time with quality as requested

• Willing to work OT (if required to deliver the work)

• Able to demonstrate thorough analytical skills process

• Able to think and work independently with minimum but clear guidance

Technical Skills Requirements:

• Hands on and familiar with Project Management / WBS in SAP

• Handling/Analyze Thousands of WBS data regularly

• Contract Assets/ Contract Liabilities

• Return on Capital Employed (RoCE) concept

• Orderbook concept

Other Requirements:

• At least more than 5 years of Financial Accounting and Business Controlling experience;

• Proficient with MS Excel, MS Powerpoint, SAP

• Knowledge on Project Costing/ WBS settlement will be preferred

• Strong business acumen, analytical skills and sound knowledge of accounting, taxation standards and relevant statutory requirements

• Able to work independently under high pressure with very limited resources

• Strong communication and presentation skills

• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Description

- Managing a part of the construction

project

- Assist in technical advice and supervision

for other members of the staff

- Planning day to day work program of the

project progress

- Ensure projects meets agreed

specifications, budgets as well as

timescales

- Authorizing technical drawings and

engineering plans

- Ad-hoc assignments

Job Requirements

- Diploma in civil engineering or equivalent

- Minimum 1 year experience in landed

property from start to finish

- Good communications skills

Job Overview

The Senior Contracts Officer will manage, negotiate, and administer contracts to ensure compliance with company policies, client requirements, and industry standards within the FPSO sector. This role is critical for supporting project execution, mitigating risks, and ensuring that all contractual obligations are met efficiently.

Key Responsibilities

• Contract Drafting and Administration:Prepare, review, and revise contracts, ensuring alignment with company standards and legal requirements.
  Maintain a comprehensive database of contracts and monitor their lifecycle.
  
• Negotiation:Support the negotiation of contract terms with clients, vendors, and subcontractors to achieve favorable terms.
  Resolve contractual disputes promptly and amicably.
  
• Compliance and Risk Management:Ensure adherence to legal, regulatory, and contractual obligations specific to FPSO operations.
  Identify and mitigate risks in contracts to safeguard company interests.
  
• Coordination and Communication:Collaborate with internal teams, including legal, procurement, and project management, to align on contractual terms.
  Serve as a liaison between the company and external stakeholders regarding contractual matters.
  
• Reporting and Documentation:Prepare detailed reports on contract performance, risks, and compliance.
  Maintain accurate records of contractual documents for audits and future reference.
  

Qualifications and Experience

• Education:Bachelor’s degree in Law, Business Administration, or a related field.
  
• Experience:Minimum of 10 years of experience in contract management, preferably in the oil and gas or FPSO industry.
  Strong understanding of commercial terms, legal frameworks, and industry-specific requirements.
  
• Skills:Proficiency in contract management software and tools.
  Excellent negotiation, analytical, and communication skills.
  Detail-oriented with a strong ability to handle multiple tasks under tight deadlines.
  

Preferred Qualifications

• Knowledge of FPSO design, construction, and operational contracts.
• Familiarity with international maritime and oil and gas regulations.
• Certification in contract management (e.g., IACCM, NCMA) is an advantage.

Responsibilities:

• To manage and monitor of daily project works, instructions and progress.
• Ensure a safe work environment on site
• Supervise all works, including Civil and architectural works, road works and utility diversion
• Track the progress and quality of work being performed by operations.
• Work closely with consultant, and sub-contractor.
• Supervision of construction works and handle coordination works at sites and ensured targeted completion dates are met
• Attend regular meetings with owner/client/contractors on the project related matters
• Ensure that the works are carried out in accordance with the Project Quality & Safety Plan, contract requirements, including drawings and specifications
• Create and maintain detailed project documentation
• Monitoring resources on site and ensuring that sufficiency, availability, and performance are aligned with the schedule.
• Ensuring that the works are carried out to schedule and in accordance to government regulations

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilities

• Analyse data on Environment, Health and Safety (EHS) performance, processes and practices.
• Drive, coordinate and implement day-to-day EHS initiatives
• Maintain and improve EHS standards and practices at the workplace.
• Prepare EHS reports on regular basis.
• Promote EHS activities, organise committee meetings and conduct regular training to stakeholders.
• Conduct Safety Inspections, EHS audits and where required, undertake incident investigations.
• Ensure operations compliance with EHS legislations and requirements including subcontractors.
• Maintain EHS Management System documentation.
• Perform statutory roles of Registered WSH Officer

Requirements

• Must be a Workplace Safety & Health Officer registered with Ministry Of Manpower (Singapore).
• Experience and good knowledge of Environment, Workplace Safety & Health Management Systems such as ISO14001 and ISO45001 including and BizSAFE Certification.
• Minimum 2 years’ experience as WSHO in Singapore.
• A team player and have the ambition to excel in EHS discipline.
• Good written and communication skills.
• Possesses initiatives and creativity to drive process improvements.

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 8 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Assemble or fabricate mechanical parts, pieces or products using a variety of tools and equipment according to required specifications in a manufacturing organization

Organizes, coordinates, and supervises employees and activities within the fabrication department to ensure an effective and efficient fabrication operation that meets safety, quality, and production standards. Reports to Plant Manager.

Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, weld symbols, bills of materials, and other written instructions or procedures to accurately create equipment and products

Utilize handheld tools such as a hand held screw gun, drill gun, and grinders

Operate calipers, weld gauges, tape measures, and other welding hand tool

Maintain weld machines using preventative maintenance methods Continually evaluate weld machine performance and technology to improve cycle times

Maintain inventory of manufacturing product and welding consumables

Create specific weldment set-ups and fixturing to meet geometric requirements

Perform quality work checks to ensure the product meets quality standards

Identify product defects and complete appropriate documentation when defects are identified

Rework and/or repair welded parts and products according to engineering specification changes

Perform all work in accordance with quality standards and established safety procedures

Prioritize work flow through effective communication with management staff

Maintain a clean and safe work area

Engineering Project Managers are pivotal in steering complex engineering projects from conception to completion, ensuring that technical solutions are delivered on time, within budget, and to the required quality standards

Defining project scope, goals, and deliverables in collaboration with senior management and stakeholders

Developing detailed project plans that outline specific engineering tasks, timelines, and resource allocations

Coordinating cross-functional teams of engineers, designers, and technical staff to ensure project milestones are met

Managing project budgets, including cost estimation, budget tracking, and financial reporting

Ensuring compliance with industry standards, regulatory requirements, and company policies

Identifying, assessing, and mitigating project risks and issues throughout the project lifecycle

Communicating effectively with stakeholders to provide project updates, gather feedback, and make informed decisions

Conducting post-project evaluation to identify successful elements and areas for improvement for future projects

Continuously updating project documentation and maintaining accurate records for all project-related information

Leading and motivating project teams, providing guidance and support to foster a collaborative work environment

Leading and motivating project teams; assigning tasks and deadlines

Managing project budgets and resources, including adjustments as necessary

Identifying, assessing, and minimizing project risks throughout the project lifecycle

Directing the allocation of resources across various projects for optimal efficiency

Job description

• Prepare drawings for the production line & provide design information to customers upon their requests.
• Follow up on customers’ requests & requirements. Provide on-site & off-site service to customers.
• To pick up any orders for fabrication or modification from customers.
• To abide by all contractual assignments and rules and regulations in any OEM maker contract.
• Require traveling or attached to overseas assignment and will be subjected to overseas allowance.
• To follow all duties and responsibilities assigned by the management or superiors.

Requirements

• Degree / Diploma in Mechanical Engineering or equivalent
• Proficient in CAD software, preferably in AutoCad & SolidWorks
• Preferably with knowledge in Jigs & Fixtures design
• Preferably with experience in the Semiconductor industry
• 3-5 years of relevant experience

Job Description:

1. Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission

2. Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.

3. Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.

4. Complete work order for each vehicle and unit serviced.

5. Adhere to defined guidelines in regards to safety, orderliness and etc.

6. Performs ad hoc duties as assigned by Superiors

Job Requirements:

1. Academic qualification: NTC 2 / Diploma Automotive Technology or equivalent

2. Competent in basic English (verbal & written)

3. Prefers candidates with at least class 3 driving license

4. Prior experience of at least 2 to 3 years in performing automotive service repair (commercial vehicle)

Job Title

Engineer

Occupation

ENGINEER

Job Description & Requirements

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

Responsibilities:

• Responsible for pre and post contract QS services;
• Handles interim and final payment claims and feedback comment to payment response to Management
• Job site visiting and monitor site progress
• Responsible for quantities taking-offs, work out variations claim, verify measurements with the client
• Handles contract administration and settlement of final accounts with clients & subcontractors;
• Monitors project phasing & payments;
• Preparation & Revision of Construction Programmes & follow-up delay claims

Requirements:

• Degree in Applied Science in Construction Management or Diploma in Building Services / Mechanical / Electrical engineering
• Able to meet challenging work demands and tight schedules
• Good interpersonal and communication skill
• Good command of spoken and written English
• Independent and resourceful

Key Responsibilities

Administrative Operations:

• Manage office operations, vendor coordination, and procurement processes.
• Handle vendor management systems such as Ariba and GeBIZ, ensuring efficient and compliant operations.
• Develop and implement policies and procedures for improved operational efficiency.

HR Operations:

• Oversee HR functions including recruitment, onboarding, payroll, employee relations, and compliance with Singapore labor laws.
• Create and manage employee-related documentation, including employment contracts, performance appraisals, and termination letters, ensuring compliance with local laws.
• Foster a positive work environment by leading and mentoring the HR and administrative teams.

Finance & Compliance:

• Prepare and manage income tax and GST documentation in compliance with Singapore’s regulatory framework.
• Ensure accurate and timely submission of statutory documents such as CPF contributions, IRAS filings, and MOM-related requirements.
• Provide support in financial audits and maintain accurate records for compliance.

Vendor Management:

• Manage vendor relationships through platforms like Ariba and GeBIZ.
• Ensure timely procurement, payment processing, and compliance with procurement policies.

Requirements

• Education: Master’s Degree in Management or a related discipline.
• Experience: 4–5 years of relevant experience in the construction sector in Singapore.
• Knowledge:Strong understanding of Singapore company laws, employment laws, and financial regulations.
  Experience in vendor management systems like Ariba and GeBIZ.
  Familiarity with income tax and GST documentation in Singapore.
  
• Skills:Excellent communication, organizational, and leadership skills.
  Proficiency in Microsoft Office Suite and HRIS systems.
  Ability to handle multiple priorities in a dynamic environment.
  

Work Location: 8 Tuas Avenue 18, Level 5, Singapore 638892 (Company bus at 0800hrs Tuas Crescent MRT Exit B bus stop)

Working Hours: Monday to Friday: 08:30 AM - 05:30 PM

• Prepare monthly group consolidated cashflow for the risk assessment on the group cashflow
• Monitor bank service fees and address quality issues
• Manage and strengthen banking relationships
• Review the banking facilities on new requirements and rates competitiveness
• Preparing Trade Finance & Hire Purchase submission
• Handling of Shipping documents and discrepancies
• Managing opening & closing of bank account, update of bank signatories and bank token management
• Prepare and coordinate board resolution and minutes for all finance related matters
• Managing FX hedging and borrowing rates
• Ensure adequacy for banking facilities to cater for business expansion
• Collate P&L and BS analysis to track and ensure compliance of bank covenants
• Prepare and submit monthly treasury report to GM Finance
• Any other tasks/projects assigned by immediate supervisor

Requirements

• Bachelor’s degree in Finance or Accounting is required
• 3 years relevant treasury working experience particularly in cash management and hedging management
• Prior experience in FX trades
• Analytical and meticulous
• Possess good communication and interpersonal skills
• Possess good quantitative skills, have financial modelling and advanced working knowledge in MS Excel
• Driven, independent individual who adapts well in a fast-paced environment
• Strong knowledge in investment portfolio strategy, banking, and financial instruments

Shortlisted candidates to bring along completed job application form, resume and academic certificates to interview

Responsibilities:

• Provide overall administrative support to ensure smooth running of Admin & HR Department
• Work closely with Project Team and provide HR & administrative support for Manpower allocation, worker accommodation arrangement, and etc.
• Handle all insurance policies and claims matters eg. Group H & S Insurances, Workmen Compensation Insurance and WICA claims
• Handle on-boarding and off-boarding process
• Plan, organize and oversee the execution of training programs.
• Update and maintain the list of Company’s Track Records for BCA renewal submission
• Keeping up with updates or revisions in ISO standards and handle ISO Certification auditing
• Maintain an up-to-date record of all company vehicles.
• Manage COE renewals, road tax payments, and insurance policies.
• Coordinate Company events on special occasions.
• Other ad-hoc duties as assigned by HR & Admin Manager

Requirements:

• Degree / Diploma in Human Resource, Business Administration or related discipline
• 2-3 years working experiences
• Good knowledge of Microsoft Excel, Words
• Willing to learn, meticulous and able to work under pressure

We are locally own company since Year 2003. We are located at Tuas View Place. Currently, we are operating 2 shifts with 5.5 working days per week with OT. We mainly using Makino Wire Cut Machines and Mazak CNC Lathe.

We have vacancy for EDM Wirecut programmer cum machinist. Prefer with cadcam knowledge and experience.

We specialist in manufacturing of aerospace parts , oil & gas , stamping, semiconductor parts.

- Must have knowledge of using measuring equipment, Vernier Caliper, Micrometer, Height Gauge

- Must be able to understand Technical Drawing

- Must be able to liaise with Customers

- Must quality check all finished parts before sending to customers

- Generate QC Reports to customers

- Must be able to use Microsoft Excel / Words / Email Anyone with the equivalent knowledge will be consider Salary will commence base on experience.