Description

• Design and optimization of mechanical components for HVAC systems
• Analysis of mechanical systems, including structural, fatigue, thermal and vibration
• Develop manufacturing drawings in accordance with applicable standards
• Construct and build developed systems
• Collaborate and interact with external vendors for component selection, manufacturing and system assembly
• Read, interpret and review technical drawings, schematics, and computer-generated reports
• Generate operating procedures and provide technical information
• Collaborate and analyze customer design proposals, specifications and requirement, and to evaluate and propose solutions

Requirements

• Bachelor’s degree in mechanical engineering or equivalent engineering degrees
• Diploma with good experience in mechanical design and system assembly will also be considered
• Good mechanical aptitude and knowledge
• Proficient in SolidWorks and modeling
• Excellent problem solving and project management skills
• Background in HVAC engineering is a plus
• Experience in product development especially in HVAC product development is a plus
• Technically sound coupled with experience in sourcing, negotiation and cost control
• Possess initiatives, logical thinking and good analytical abilities, and able to resolve issues from multiple perspectives.
• Passion for the job and a challenging spirit preferred.
• Strong communications and interpersonal skills

Job Description & Requirements

• Perform general electrical maintenance including troubleshooting and repairing malfunctioning equipment.
• Identify the root cause and conduct analysis to generate solutions.
• Ensure completion of all protective maintenance duties are following the safety standards that complying with company policy.
• Install improvements and major upgrades to process system.
• Provide engineering support in project or plant maintenance
• Alert the Engineer Managers of any unusual incident that have taken place.
• Monitor the equipment process and prevent the equipment breakdown.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Requirements:

• Good interpersonal and communication skill
• Work independently
• Attention to details
• Good problem solving and observing skills

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Understanding Client Needs - Dive deep into understanding our clients’ goals and preferences, ensuring that our marketing efforts align perfectly with what they’re looking for.
• Analyzing Data - Keep an eye on the numbers! You'll track campaign performance and client engagement to see what’s working and what can be improved.
• Collaborating with the Team: Work closely with our consultants to ensure that our marketing strategies align with their client interaction and advice.
• Bringing Fresh Ideas - We love innovation! Share your creative ideas and help us stay ahead of the curve in the financial consulting world.
• Assisting with Events - Help organize and promote webinars, workshops, and other events that showcase our expertise and connect with potential clients.
• Handling Client Feedback - Gather and analyze client feedback to refine our marketing approaches and improve client satisfaction.
• Managing Budgets - Assist in managing and allocating marketing budgets to ensure resources are used effectively.
• Reporting and Metrics - Prepare regular reports on marketing activities and client engagement, providing insights and recommendations for continuous improvement.

Candidate Requirements on the lookout:

• Masters in business administration degree in a related field: We value relevant experience and a proactive attitude just as much. Fresh graduates are welcome.
• Passion for Marketing: A genuine interest in marketing and how it can be used to attract and retain clients.
• Strong Communication Skills: Whether it’s writing engaging content or collaborating with team members, your communication skills are top-notch.
• Creative Thinker: You should bring fresh perspectives and innovative ideas to the table.
• Heart to Serve: We're looking for someone who loves meeting new people and adds value to their day-to-day experiences. If you’re passionate about making meaningful connections and enhancing the lives of those you interact with, we'd love to hear from you.
• Detail-Oriented: We’re looking for someone who pays attention to the small stuff and ensures everything runs smoothly.
• Tech-Savvy: Familiarity with marketing tools and platforms, including social media and analytics tools, is a must.
• Open to Career Opportunities: We have various positions available so this role can be your opportunity and stepping stone to a stable career in finance.
• Team Player: We’re a close-knit team, so being able to work well with others is key to your success here.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Key Responsibilities:

• Manage full accounts cycle, including bank reconciliation and journal entries.
• Ensure accurate data entry in for all transactions.
• Prepare financial data for entry into the financial system
• Keep accounting records and bank statements
• Ensure timely, accurate month-end and year-end closing
• Prepare and file GST returns
• Preparation of tax computation and tax planning
• Filling tax returns on time and updating the management about new changes in rules and regulations.
• Liaise and coordinate with external auditors and tax agents;
• Ensure accounting deadlines are met;
• Review subsidiary accounts
• Other ad hoc duties

Job Requirement

• Diploma in Accountancy or equivalent.
• Minimum 2 years of relevant accounting experience.
• Have prior experience in handling full set of accounts and statutory reporting
• Independent to fulfil tasks and a team player to perform tasks in the company workflow

• Posting of recruitment advertisements
• Engagement with both internal and external stakeholders such as employees and vendors, etc
• Manage office sundry purchases
• Payroll administration
• Assists in employment contract renewals
• Coordinate medical arrangement for foreign employees (medical check-ups for work pass, and vaccination)
• Ensure complete, up-to-date, accurate and accessible records are kept for all employees.
• Assists in the co-ordination of social and recreational activities to promote the general welfare of all employees
• Performs HR data entry relating to employee's information, training records, etc.
• Manage and route phone calls appropriately
• Assists in work pass applications and other immigration related work.
• Prepare and submit government bodies and statutory board related surveys.

• Required load and unload material etc
• Maintain material movement record.
• To comply with LTA road safety and traffic regulation and site safety.
• To conduct daily check to ensure vehicle is in good and safe condition/upkeeping of vehicle.
• Valid class 4 driving license and lorry crane operator.
• Prefer ably to start work within short notice.

1.Manage store Inventory & handle sales cash.

2.Receive ,distribute and maintain adequate quantities of stock at all times.

3.Maintain optimal stock levels.

4.Maintain stock and consumption records.

5.Check incoming materials for quality against invoices,purchase orders and packing slips or other documents.

6.Make clear notes on the receipt of the items against eash invoice.

7.Keeps and updates records of good received and issued.

8.Complies report of expenditure,and monthly stock report.

9.Perform related duties and responsibilities as assigned.

Job Description:

• Be directly involved in building, assembling, testing, troubleshooting and improving Unmanned Ground Vehicles (UGVs) by working with system experts.
• Handle system integration, testing, data collection, and validation of UGV's performance.
• Perform electrical and mechanical sizing, ensuring that components are properly sized and integrated.
• Work with electrical and control engineers on prototyping and troubleshooting systems.
• Assist in designing mechanical parts such as chassis and brackets.
• Manage the procurement of components.
• Create documentation, including design specs, test cases, system requirements, and user manuals.
• Work with technicians during integration and testing, and help resolve technical issues.

Requirements:

• Degree in Mechatronics, Robotics, Electrical/Electronics, Mechanical Engineering, or similar fields.
• Entry level candidate are welcome to apply.
• Knowledge and proficiency in system integration, control theory, motors, sensors, and mechanical systems.
• Familiar with CAD and troubleshooting of electrical and mechanical systems.
• Good problem-solving skills and the ability to manage multiple tasks and deadlines.
• Team player with strong communication skills, eager to learn and work in new technology areas.
• Experience building and testing robotics/control systems would be advantageous.
• Experience and/or understanding with communication interfaces like RS232, RS485, and CAN would be advantageous
• Experience and/or understanding of vehicle systems such as drivelines, steering and brakes would be advantageous.

Jobs Description:

• Manage the daily operations of the project to ensure smooth operation.
• Required to attend projects meeting at sites/offices.
• Manage the relationship with the client and all stakeholders
• Resolve technical and contractual issues, etc that may arise.
• Develop budgeting plan, project analysis report to Management.
• Ensure that all statutory requirements of the Regulations, Codes of Practice and company’s safety rules & regulations are always complied
• Handle ad hoc assignments or tasks as required.

Requirements:

• Bachelor’s Degree or Diploma in Building Construction or Civil Engineering.
• At least 3 years of working experience in a similar capacity within the construction industry.
• Ability to manage multiple projects.
• Good understanding of construction drawings, sequencing of works, and safe methodologies.
• Good negotiation and communication skills.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

We're Hiring: Project Coordinator for Renovation Projects

Roles & Responsibilities

· Overall responsible for the sites’ maintenance and provide strong technical stewardship in various disciplines

· Provide strategic guidance in sourcing & contract management, operations & maintenance and resource & cost sustainability

· Manage multiple stakeholders, including vendors and customer

· Forge win-win partnerships with tenants’ shopfloor/ frontline operations.

· Grow and develop the in-house technical expertise

· To coach and train the team so that they are familiarized and knowledgeable of the requirements

· Ensure all projects and maintenance works are carried out according to the schedule planned

· To take charge and lead the in-house maintenance team in all daily facilities maintenance issues

· Supervise and manage contractors in fulfilling their contractual obligation and ensure smooth operation of the buildings

· Attend to feedback by tenants/ clients, to recommend and take remedial actions in a timely manner

· Promote good relations with our staff, contractors and management

· Prepare quotation for service as required

· Any other ad-hoc assignments assigned by the Management.

Requirements

· Minimum 0 years of experience in related functions

· Has good knowledge of operations support

· Good communication skills (written and oral)

· Pro-active manner, willing to offer new suggestions and share

· Proficient in Microsoft Office/Excel

· Agile, innovative, meticulous, self-driven with a keen eye for details

· Team player, hands-on and with a positive attitude

· Strong interpersonal skills, and able to manage and work with various stakeholders

· Able to multitask and perform under pressure to deliver

• Supporting project communication systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.
• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation

Requirements

Primary Work Location: Jurong East Hub

Working Hours : 8.30am – 6pm

Qualification : Diploma in Mechatronic, Mechanical, Electrical & Electronic

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.
• Maintain systems and component capabilities through rigorous testing, track cutting-edge trends, search for ways to improve functionality and efficiency, and implement appropriate segments to keep production methods current
• Prepare comprehensive documentation for all electrical designs, including wiring diagrams and schematics, bills of materials, assembly drawings, design changes, test reports, design-validation plans, and reports ensuring that installations and operations conform to standards and customer requirements

Analyze customer and project requirements, and provide technical guidance and recommendations to project teams and stakeholders

● Develop and implement testing and validation protocols to ensure that electrical systems and equipment meet or exceed industry standards and regulations

● Collaborate with other engineers, project managers, and stakeholders to ensure that projects are completed on time, within budget, and to the highest quality standards

● Stay up-to-date with industry trends, technologies, and best practices in electrical engineering, and recommend new tools and techniques as needed

• Attend to Client’s site surveys, meetings and maintain constant contact/communication regarding project works (In progress and new)
• Work closely with the drafting department to come out with preliminary design (for client’s approval), material take off and cost estimation for the new potential projects
• Carry out cost estimation and prepare quotation for clients
• Overall in charge of project’s delivery schedule, cost control, quality and safety (i.e. ensure that projects are carried out within budget, schedule and with zero rework and safety incident)
• Prepare Risk Assessment for Clients review and approval prior to work start
• Check and ensure proper documentation (such as test packages, as-built drawings etc) are in place prior to project close up
• Ensure overall safety well being of workers in the workshop as well as the on site during project execution
• Attend and participate all Safety Meetings organized by Clients

1.Manage store Inventory & handle sales cash.

2.Receive ,distribute and maintain adequate quantities of stock at all times.

3.Maintain optimal stock levels.

4.Maintain stock and consumption records.

5.Check incoming materials for quality against invoices,purchase orders and packing slips or other documents.

6.Make clear notes on the receipt of the items against eash invoice.

7.Keeps and updates records of good received and issued.

8.Complies report of expenditure,and monthly stock report.

9.Perform related duties and responsibilities as assigned.

• Preparing / catering of all necessary documents for submissions.
• Processing work orders, delivery orders,paperwork, etc.
• Monitoring and managing all phases of projects development and schedules.
• Coordinate and building good rapport with the clients.
• Ensure proper tracking and reporting of projects development.
• Work as assigned.

Job Requirements:

• Preferably 3 years experiences in construction field
• Proficient in microsoft wors,excels.

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Hunter role need to exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. Diploma Holder in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal hunger for success and communication skills

· Initiative and results driven

· Entry level candidate are welcome