Nanyang Environment and Water Research Institute, NTU is looking for a Research Fellow with expertise in chemical reactors to develop an improved prototype for a thermocatalytic process.

The project is funded by National Environment Agency, Singapore to address one of the largest problems in waste management – the problem of plastic waste pollution. A significant fraction of plastic waste has substandard quality for mechanical and chemical recycling even after sorting and cleaning. The Research Fellow will work on the design, fabrication and testing of a chemical reactor system that will use pyrolysis-chemical vapor deposition (CVD) technology for converting these plastic waste streams (specifically, contaminated and rejected plastics) into multi-walled carbon nanotubes (MWCNTs) and hydrogen. The role of Research Fellow is to design a system prototype that can effectively mitigate the impact of impurities from diverse plastic waste streams on production outputs and can be operated in a continuous mode.

Key Responsibilities:

The candidate will be undertaking full research work and administrative duties during the term of employment within the following areas:

• Experimental work on plastic waste conversion into carbon nanotubes and hydrogen.
• Design, procurement, installation and operation of the prototype system;
• Investigation of system performance and determining factors that influence the yield and quality of outputs;
• Development of improvements in system design to mitigate the factors decreasing quality and yield of outputs;
• Development of a continuous process;
• Liaising with vendors regarding the feasibility of scale up and conducting a cost-benefit analysis.
• Publishing research papers and documenting developed intellectual property.
• Reporting the progress to stakeholders (internal and external).

Job Requirements:

• Ph.D. degree in a field relevant to chemical reactor engineering (e.g., Chemical Engineering, Thermal Engineering, Mechanical Engineering, Process Engineering or other).
• PhD thesis or postdoctoral experience related to chemical reactor engineering for at least one of the following areas: (a) catalytic reactors, (b) continuous reactors.
• First-author publications in the areas mentioned above.
• High proficiency in English (e.g., TOELF, IELTS, GRE) for preparation of research papers.
• Ability to prepare well-written technical reports and research papers.
• Ability to prepare decent quality presentation decks, figures and illustrations.
• Ability to build formal and informal partnerships and work collaboratively with others to meet shared objectives.
• Ability to consistently achieve results, even under challenging circumstances.

We regret to inform that only shortlisted candidates will be notified.

Salary: $2400-$2800+allowances+OT=>$3300-$4000++

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Mon to Fri 3 rotating shift

Job Description

• Operate and monitor machinery on the assembly line to ensure smooth operation
• Conduct routine maintenance tasks on machinery as needed
• Identify and address any issues with machine operation
• Utilise mechanical and electrical knowledge to troubleshoot and repair production machines
• Conduct regular inspections to identify potential malfunctions and perform preventive maintenance

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional, and related sectors.

With offices across Europe, Asia, and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for Recruitment/Sales Intern- Engineering Services-Pharma to join us on an Internship to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Build your network by engaging with candidates as a talent acqusition/recrtuiter
• Build and strengthen your network of candidates via cold calling, and face to face meetings
• Continually seek opportunities to increase customer satisfaction, driving continuous improvement initiatives.
• Build a network of clients to sell out outsourced technical solutions.
• Must be in the last semester of your studies as a full time job could be available for the right talent.

If you'd like to find out about this opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal-opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing on employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

• Successful candidate will be helping the manager in engineering data entry, follow up on customers queries, general office administration work etc.
• Candidate should possess ITE certificate and above, preferably in engineering related field
• Proactive team player with the ability to work independently at times. Possesses initiative and good communication skills
• Proficient in basic computer skills, Microsoft Word, Excel
• At least 3 Year(s) of working experience in an office environment is preferred.
• Fresh graduates, mid-career switching, retirees/stay at home moms wanting to return to the work force are welcome to apply

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scopes & Responsibilities

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Lead and participate in technical transfer activities and cross-functional meetings
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints
• Effectively manage and work with project CQV team to ensure timely delivery of projects
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications
• Responsible for investigation of deviations, development of corrective and preventive actions and implementation of change controls in a timely manner
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo
• Benchmark equipment performance (e.g., reliability, productivity) and determine improvement plans
• Periodically review and/or improve equipment safety, maintenance strategy, spare parts, and other continuous improvement opportunities to enhance reliability
• Responsible for management and oversight of team of CQV engineers
• Develop the best team by coaching and mentoring engineers to develop their technical competency and leadership skills

Qualifications

• Doctorate degree in Engineering OR
• Master’s degree in Engineering and 4 years of directly related experience in a pharmaceutical manufacturing site OR
• Bachelor’s degree in Engineering and 8 years of directly related experience in a pharmaceutical manufacturing site
• Able to work independently with minimal of no supervision
• Experience in managing various stakeholders expectations related to process equipment in biopharmaceutical
• Good communications skills, both oral and written, including presentation skills
• Good interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Strong analytical skills and knowledge of industry trends to identify potential improvement opportunities. Ability to combine technical problem-solving skills with business acumen to determine best business solution
• Working knowledge of biopharmaceutical processes such as chromatography, buffer / media tanks, viral filtration, tangential flow filtration is preferred. Process knowledge on inoculation, bioreactors, harvest, single use technologies and critical utilities will also be considered
• Experience in validation processes such as generation/execution of Installation/Operation/Performance qualification documentation
• Knowledge in Automation systems and processes such as RD’s, Delta-V, BMS, ladder logic and PLC
• Demonstrated project management skills (schedule/cost development, facilitation, collaboration, basic project management, completion and follow-up) and application of concepts
• Problem solving skills requiring the application of scientific and engineering theory and calculations and creative skills in the development of hypotheses and approach
• Flexibility to work off-hours
• Knowledge of Total Productive Maintenance, Reliability Centered Maintenance concepts is an added advantage

Project Design & Engineering Calculations and Proposal drawings to Client Management.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as per Equipment sample or Site measurement studies

Analyse sub-contractor proposals, design and calculation feasibility study.

Coordinate with Government and various agencies.

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Manpower planning, deployment and control and on-time schedule.

Coordinate to resolve engineering and construction issues and manage the schedule.

Safety mindset and ability to develop RA and permit to work application.

Maintain proper project documentation and ensure accuracy of all design submissions to comply with project specifications and clients’ requirements.

Monitoring of site activities, material requisition, cost control, project supervision and schedule of works

Ensure that works are executed within an acceptable standard of workmanship and in line with safety procedures

Understand and ensure compliance in project requirement and scope of work

Issuing of material requisition form, assist in purchasing materials/items required by production/customers, prepare marketing material & etc.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Any adhoc duties as assigned by management.

Min 3-5 years’ of experience in Engineering mfg, Recycling, Oil & Gas and Chemical plant industry.

Applicable for Only Singaporeans & PR's.

1. Design and Planning

• Review and interpret electrical designs, blueprints, and technical drawings.
• Coordinate with design engineers, architects, and other stakeholders to ensure that electrical plans align with project requirements.
• Propose modifications or improvements to electrical systems to enhance efficiency or safety.

2. Installation and Supervision

• Oversee the installation of electrical systems, equipment, and fixtures, ensuring compliance with standards and specifications.
• Supervise electricians, technicians, and subcontractors to ensure proper execution of tasks.
• Plan and allocate resources, including manpower, tools, and materials.

3. Quality Assurance and Compliance

• Ensure that all electrical work complies with local codes, standards, and regulations (e.g., NEC, IEC).
• Conduct regular inspections and audits to ensure quality and adherence to safety protocols.
• Test and commission electrical systems to confirm functionality and performance.

4. Troubleshooting and Maintenance

• Identify and resolve issues with electrical systems during installation or operation.
• Develop and implement preventive maintenance schedules for electrical equipment.
• Prepare troubleshooting guides and provide technical support as needed.

5. Safety Management

• Enforce safety protocols and ensure the use of appropriate Personal Protective Equipment (PPE).
• Conduct risk assessments to identify and mitigate hazards related to electrical works.
• Train staff on electrical safety and emergency response procedures.

6. Documentation and Reporting

• Maintain detailed records of electrical installations, inspections, and maintenance activities.
• Prepare daily progress reports, test reports, and as-built documentation.
• Report project progress and issues to the project manager or higher management.

7. Budget and Cost Control

• Estimate costs for electrical components and systems.
• Monitor project expenditures to ensure that electrical work stays within the budget.
• Suggest cost-effective solutions without compromising quality or safety.

8. Coordination and Communication

• Collaborate with other engineering disciplines to integrate electrical systems into the overall project.
• Communicate effectively with stakeholders, including clients, contractors, and suppliers.
• Attend project meetings and provide updates on electrical works.

9. Problem-Solving and Innovation

• Propose innovative solutions to overcome challenges during project execution.
• Stay updated on advancements in electrical engineering and incorporate new technologies where applicable.

Job Summary:

We are looking for a dynamic and experienced HR Coordinatorto lead and manage the HR operations in our Singapore office. The ideal candidate will focus on executing operational HR strategies and initiatives that support the business's goals. This includes overseeing employee lifecycle processes, ensuring compliance with local employment regulations and driving HR process improvements. You will work closely with the regional HR team and business leaders to create an efficient, engaging, and productive work environment.

Key Responsibilities:

Work Pass Management:

• Process and manage work pass applications (Employment Pass, S Pass, Work Permit, Dependant Pass, etc.) for foreign employees.
• Ensure timely renewal, cancellation, and updating of work pass details in compliance with Ministry of Manpower (MOM) regulations.
• Act as the primary contact for all work pass-related inquiries from employees and relevant authorities.
• Keep up to date with changes to work pass regulations and ensure the company remains compliant.

OFWAS (Online Foreign Workers Address Service):

• Administer the OFWAS process for foreign workers, ensuring accurate and timely updates to their residential addresses in the MOM system.
• Assist employees in registering and updating their address information via the OFWAS portal.
• Ensure that all foreign worker address-related requirements are met and in compliance with MOM guidelines.

MWOC (Migrant Worker Onboarding Centre):

• Coordinate the onboarding process for migrant workers through the MWOC, ensuring that all workers complete the mandatory onboarding requirements.
• Provide guidance to migrant workers regarding the necessary documentation and steps for onboarding at the MWOC.
• Ensure that all migrant workers' onboarding documents are processed, and related data is uploaded to the MOM portal.

Training Certificates Upload:

• Assist employees in ensuring that required training certificates (such as safety and compliance training) are obtained and correctly uploaded to the MOM portal.
• Ensure compliance with MOM requirements related to training and certifications for foreign workers.
• Track employee training records to ensure that all certifications are up-to-date and uploaded within the required timelines.

General HR Coordination:

• Assist with employee onboarding, ensuring all documentation (contracts, medical checks, and identification documents) is verified and processed.
• Managed foreign workers' related matters such as security bonds, OFWAS, PCP, and air ticket bookings.
• Provide administrative support to the HR team in handling employee queries and ensuring smooth day-to-day HR operations.

Compliance and Reporting:

• Ensure the company’s HR practices comply with the Employment Act, MOM regulations, and other relevant laws.
• Prepare and submit necessary compliance reports to MOM and other relevant authorities as needed.
• Support in internal audits, ensuring all records related to work passes, OFWAS, MWOC, and training certificates are up-to-date and complete.

Qualifications:

• Bachelor’s degree in human resources, Business Administration, or related field.
• Minimum 5 years of HR experience, with a focus on HR operations.
• Strong knowledge of Singapore labour laws and MOM regulations.
• Excellent communication and interpersonal skills.
• Analytical and problem-solving abilities, with a focus on continuous improvement.
• Ability to work in a fast-paced environment, manage multiple tasks, and meet tight deadlines.
• Demonstrated ability to maintain confidentiality and handle sensitive information.

Creating and managing team schedules. In some cases, organizations have set hours for their entire workforce

Reporting to HR and senior management. Supervisors serve as a bridge between upper management and other employees

bridge between workers and top managment, explain work schedule to workers and check on there work ability

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Internal Controls Assessment – Conduct reviews of internal controls to ensure they comply with JSOX (Japanese Sarbanes-Oxley) requirements. This involves evaluating the effectiveness and efficiency of control mechanisms, identifying any gaps or weaknesses, and recommending improvements. Additionally, ensure that all processes and procedures align with regulatory standards and best practices to mitigate risks and enhance operational integrity.
• Reporting and Documentation – Prepare detailed reports and documentation for risk assessments, audits, and compliance activities, ensuring accuracy and timeliness.
• Compliance Program Management – Manage compliance programs, ensuring all activities adhere to regulatory and internal standards.
• Risk Assessment Coordination – Actively coordinate and conduct detailed risk assessments across various operational activities, ensuring potential risks are identified and mitigated effectively.
• Lessons Learned Maintenance – Maintain and update a comprehensive database of lessons learned from past projects, facilitating continuous improvement and knowledge sharing.
• Any other duties to be asisgned from time to time

Pre-requisites:

• Degree in Accounting, Finance, Engineering or a related field
• Minimum 5 years of relevant work experience
• Prior compliance audit / Risk Management experience is preferred
• Self-motivated individual with a high level of integrity, drive and sense of urgency
• Strong collaboration skills and ability to work independently across different businesses units with different stakeholders
• Meticulous and mature with strong oral and written communication skills
• Strong analytical and problem-solving skills
• Ability to manage multiple tasks and meet deadlines

Responsibilities:

• To be lead engineer or assistant lead engineer in new shipbuilding or ship repair/retrofit projects
• Provide specialist technical advice and information to internal and external parties
• Prepare detailed design drawing using 3D modelling tools, such detailed design drawing could include ducting design and necessary design document to enable production of prototype for product development
• Review and approve detailed design drawings and documents e.g., piping isometrics, piping layout, ducting arrangement, equipment foundation, equipment installation, machinery room layout, bill of materials and various mechanical outfitting drawings, and ensure that the deliverables meet contractual technical specification and Classification Society’s requirements
• Ensure the detailed design drawings and documents have met the standards set by the department and provide further input for improvement
• Update 3D software database on a regular basis to ensure correctness and consistency of component’s engineering attribute.
• Manage external consultants in engineering integration and deliverables
• Coordinate and lead a team of engineers to ensure timely and accurate engineering deliverables
• Participate in tests and sea trials, where required
• Liaise with ship owners and Classification Societies to obtain approval on engineering deliverables.
• Resolve technical issues raised by ship owners and Classification Societies
  

Requirements:

• Bachelor’s Degree with Honours in Mechanical/Marine/Offshore/Naval Architecture
• At least 5-8 years experience in engineering design on HVAC (Heating Ventilation and Air Conditioning) system
• Good working experience with HVAC turnkey contractor, HVAC equipment supplier, Shipyard HVAC related department
• Well-articulated in presentations to both clients and senior management, with good command of English, both spoken and written
• Strong leadership with project management and interpersonal skills

Knowledge and Skills:

• Strong knowledge of HVAC marine international design codes, Classification/Statutory Rules and Regulations.
• Engineering and design project management skills.
• Software (preferred): AVEVA Marine, AutoCAD or similar functions
• Software (need basis): VA One, Star CCM+, Aveva PID, Pipeflow Expert

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Hiring Asst Operation Manager.

Requirements:

1) Working place at TBY Yard. 6 days work.

2) 10 years experience in Post Weld Heat Treatment.

3) Familier with yard procedures and regulations.

4) Required to oversees all daily operations in yard.

5) Prepare daily job assignment.

Qualification: Minimum Diploma

Salary range: $4000 - $6000

Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

5. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them

6. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.

7. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

TENDER-CONTRACTS and PURCHASE ORDER T&C REVIEWS

• To conduct Tender-Contract Review and provide Lookout List and address all recommendations and queries.
• Review and comment on tender analysis prepared by project stakeholders before it is presented to the Client.
• To conduct Material PO T&C Review and advise

CONTRACTS MANAGEMENT & DISPUTES

• Provide contractual advise or interpretation when required (SG and Overseas)
• Support all BUs in highlighting critical requirement and any deviation in compliance with terms & conditions from pre-contract stage to project closure
• Assist all BU/Dept in highlighting any deviation in the terms and conditions of Contract
• Ensure proper project close out of Projects and any contract related requirement
• T provide support in all Contract Matters (SG and Overseas)
• Assist Project teams/BU's in highlighting any critical requirement and deviation in compliance with terms and conditions of main contract.
• To assist in preparation of Variation Orders and Extension of Time documents
• Draft correspondences (letters/notices/requests etc) whenever required
• To support in all Claims and Disputes (SG and Overseas)

SUBCONTRACT

• To liaise and float request for proposals to bidders and obtain necessary quotation
• To assist that requestors are familiar with the sub-contracting processes.
• To assist in monitoring and reviewing project subcontract activity
• To assist in negotiation of short listed subcontractor(s) to the lowest or best price.
• To assist in negotiating better payment terms for services and subcontracts
• To assist in monitoring Procurement Subcontract Control List
• Provide liaison assistance between project team and subcontractors
• To assist in coordinating all necessary documentation for subcontract agreement
• To assist in negotiation in coordination with project teams in any discipline
• To assist in drafting project subcontracts as per project basis which is complimenting to the respective main contract
• To assist in review of subcontract deviations from vendors
• To provide contractual advice or interpretation as and when required
• To assist with project team on short listed subcontractors
• Assist in reviewing proposals and work scope of subcontractors
• To develop SOP guidelines and to provide guide and trainings
• To assist in expediting of bi-monthly subcontract planning list to meet required schedule

Reports:

• Submit monthly contracts report at first week of the month.
• Maintain to-do list for daily activities

Main Task

1 Handle Shipment & Logistics

2 Shipping Guarantee

3 Give Training & assist buddy to support Project shipping & logistics 4 Vendor Presentation & Training as per request

5 PO Creation under shipment

6 Expedite material delivery when required

Details Task for Shipment & Logistics

1 Source of potential Forwarder and understand their strength 2 Evaluate and update new/exisiting Forwarder into Approved Vendor List

3 Ensure the appropriate Incoterms specified on the purchase order are carried out.

4 Prepare Bid Tab if required for Shipping Cost & Discuss on issuing of Puchase Order

5 Process order and ensure timely Shipment and Delivery of Purchased products

6 Coordinate & provide assistance between Requester, Suppliers and Forwarders and Receivers

7 Coordinate and assist with all necessary Import & Export Documentation for all Projects

8 Ensure documents are given to Forwarders before vessel ETA & avoid any Storage or Demurrage charges

9 Ensure timely return of Containers to yard & avoid Detention charges

10 Provide all necessary Import / Export documents to Finance for their processing on GST

11 Corodinate with FIN for payment if any issues with Forwarder invoices

12 Arrange to return back original Shipping Guarantee to bank once receive Original BL

13 Run PO report under shipment and follow invoice pending for shipment if required

Vendor Presentation

1 Send invitation to Vendors to conduct Vendor Presentation

2 Ensure topic is relevant to our projects

3 Coordinate for date time and venue

4 Inform all users on the Vendor Presentation / Training

PO Creation

1 Convert PR to PO for Shipment

2 Once Purchase Order is created, save the WO copy PO in PDF and send it to requestor/buyer to check and advise for release if required

3 Once Purchase order is signed and send the approved purchase order to vendor for their action and cc to project team for their info

4 For Internal Vendor, approved PO will send via email to them for their end processing and cc to project team for their reference

Other Tasks

1 To conduct training for PROC (Internal) about shipment

2 To conduct 2 trainings as a team for BUs (external)

3 Expeditiing material delivery when require

A Mechanical Construction Manager in the Bio-Pharma industry oversees the planning, execution, and delivery of mechanical systems in pharmaceutical facilities. This role demands a deep understanding of the industry's regulatory standards and specialized systems.

Roles:

Project Leadership:

• Manage all mechanical construction activities to ensure timely project completion.
• Act as a liaison between project stakeholders, including clients, engineers, and contractors.

Regulatory Compliance:

• Ensure mechanical systems comply with bio-pharma industry standards such as GMP, FDA, and ISO requirements.

Technical Expertise:

• Provide guidance on specialized systems such as HVAC, cleanrooms, utility systems, and process piping.

Resource Management:

• Oversee the allocation of manpower, materials, and equipment to optimize efficiency.

Responsibilities:

1. Planning and Coordination:

• Develop detailed schedules and workflows for mechanical construction activities.
• Coordinate with cross-functional teams, including civil, electrical, and process engineers.

2. Supervision and Execution:

• Oversee the installation of critical systems such as:
  • HVAC for temperature and humidity control.
  • Process Piping for clean utilities like water for injection (WFI) and clean steam.
  • Compressed Air Systems and other mechanical utilities.
• Ensure cleanroom mechanical installations align with industry cleanliness classifications.

3. Quality Assurance and Testing:

• Conduct inspections and supervise the testing and validation of mechanical systems.
• Ensure adherence to design specifications, quality standards, and regulatory requirements.

4. Compliance and Safety:

• Ensure all activities follow safety regulations and risk management protocols.
• Maintain compliance with bio-pharma industry standards and certifications.

5. Budget and Resource Management:

• Monitor project budgets, cost estimations, and resource allocations.
• Manage procurement and delivery schedules for mechanical equipment and materials.

6. Troubleshooting and Problem-Solving:

• Identify and resolve issues related to mechanical construction, design discrepancies, or on-site challenges.
• Provide quick and effective solutions to minimize delays.

7. Documentation and Reporting:

• Prepare and maintain accurate records, including:
  • As-built drawings.
  • Commissioning and validation reports.
  • Progress updates for stakeholders.

8. Team Leadership:

• Supervise and mentor on-site mechanical teams and contractors.
• Conduct training sessions on bio-pharma-specific mechanical systems and best practices.

9. Project Handover:

• Ensure mechanical systems are fully functional and validated before project handover.
• Collaborate with operations teams to transition systems for facility use.

Job Description

• Prepare, manage, and facilitate design drawings utilizing BIM, Rino, Grasshopper and CAD technologies.
• Ensure all models are compatible and that BIM data is accessible to all project participants.
• Oversee coordination between architectural and structural interfaces, collaborating with main contractors and other trades for effective cross-team support.
• Work closely with the design team and other relevant departments to ensure all drawings meet design specifications.
• Manage design changes and revisions, addressing any discrepancies and queries between design and project teams.
• Attend site meetings as required and perform additional tasks as needed.

Requirements

• Degree in Architecture, Civil Structural Engineering, or a related field.
• Minimum of 4 to 5 years of relevant experience in construction and architectural projects.
• Proficiency in Revit, Navisworks, Rino, Grasshopper, AutoCAD, and MS Office.
• Knowledge of DGN, DWF, IFC, and MicroStation is a plus.
• Strong project management and decision-making skills.
• Ability to work effectively as part of a team as well as independently with minimal supervision.

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

Should be approachable and motivating.

Good managers can also uphold standards, talk honestly to employees about their performance and be able to discipline when needed.

Communication and interpersonal skills are also vital to the success of managers.

might need to act mainly as a project manager when approaching a deadline, or they may need to prioritize their role as a recruiter in response to the creation of new positions due to an expansion.

Job Description:

• Oversee and coordinate the installation and testing of systems across various sites.
• Work closely with project management and client teams to ensure projects are completed on time and to the highest standards.
• Troubleshoot and resolve on-site technical issues.
• Ensure compliance with industry standards and safety regulations for all electrical work.
• Assist in preparing and reviewing technical documentation, including drawings, electrical plans, and reports.
• Monitor project progress, provide updates to management, and promptly address any deviations.
• Coordinate with suppliers, subcontractors, and other external parties to ensure seamless project execution.
• Stay current on the latest trends and advancements in relevant technologies.
• Provide technical support and training to clients as needed.

Requirements:

• Degree in Electrical Engineering, Mechatronics, or a related technical field.
• Preferably those with CAD Drawing / Sketchup and related software skills.
• Proven experience in on-site coordination, specifically in electrical systems.
• Familiarity with robotics and LED technology is highly advantageous.
• Excellent problem-solving skills with the ability to troubleshoot technical issues effectively.
• Strong organizational and communication skills to coordinate with multiple teams.
• Willingness to learn and adapt to new technologies and processes.
• Ability to work independently and as part of a team in a fast-paced environment.
• Flexibility to travel to various sites when required.

Job Description:

• Prepare and analyze cost comparison
• Obtaining quotations, liaising and negotiate with sub-contractors and suppliers
• Responsible for measuring quantities and taking off
• Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments
• All other QS related job

Job Requirements:

• Degree / Diploma in Quantity Surveying
• Min 3 years and above experience as QS in main-con companies
• Proven ability in contract negotiation, contract administration & variation orders
• Proficiency in Microsoft Excel and Golden software
• Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive & able to meet tight deadlines
• 5 days work week

About the role

As a Construction Manager, you'll play a crucial role in overseeing the successful delivery of complex construction projects. Reporting to the senior project management team, you'll be responsible for managing all aspects of construction, from planning and budgeting to supervising on-site operations and ensuring compliance with safety regulations. This full-time position offers the opportunity to work on a variety of high-profile projects within the construction industry.

What you'll be doing

• Develop and implement detailed project plans, managing timelines, budgets, and resources to ensure successful and timely project completion
• Oversee and coordinate the work of contractors, subcontractors, and other project stakeholders to ensure seamless collaboration and efficient workflow
• Monitor construction progress, identifying and resolving any issues or risks that arise
• Ensure compliance with all relevant building codes, safety regulations, and company policies
• Collaborate with the design and engineering teams to provide input and resolve technical challenges
• Prepare and present progress reports to senior management, communicating project status, challenges, and mitigation strategies
• Assist with the development and implementation of quality control measures to maintain high standards of workmanship
• Mentor and provide guidance to junior members of the construction team

What we're looking for

• Minimum 8 years of experience in a construction management role, preferably within the commercial or residential construction sector
• Proven track record of successfully managing complex construction projects from start to finish
• Thorough understanding of construction methods, building codes, and safety regulations
• Excellent problem-solving and decision-making skills, with the ability to think critically and adapt to changing circumstances
• Strong project management and organisational skills, with the ability to prioritise and multitask effectively
• Excellent communication and interpersonal skills, with the ability to effectively liaise with a diverse range of stakeholders
• Proficient in using project management software and other relevant construction industry tools
• Degree in Construction Management, Engineering, or a related field is preferred

SERVICE TECHNICIAN (5 Day / West)

Job Type : Full-Time

• Travel Opportunity
• Training Provided
• 5 Days Work Week

Responsibilities :

• Have a passion to carry out trouble-shooting and maintenance works.
• Love the satisfaction after solving difficult machines.
• Willing to do hands-on work
• Willing to do brazing work
• Any other adhoc duties as assigned

Requirements :

• Candidate must possess at least Secondary School / "O" Level, Professional Certificate / NiTEC, Diploma / Advanced / Higher / Graduate Diploma in Engineering (Industrial), Engineering (Mechanical), Engineering (Mechatronic / Electromechanical) or equivalent.
• Required Language(s) : English
• Required Skill(s) : Aircon, Refrigeration, Chiller, Mechanical, Vacuum Pumps, Water Pumps, Scrubbers or Chillers.
• Able to travel on short notice
• Possess valid driving license (optional)
• Only Singaporean / SPR / Malaysian may apply.

Interested candidates who wish to apply for the advertised position, please send to us your resume via APPLY NOW

Email : [email protected]

We regret that only shortlisted candidates will be notified.

Responsibilities:

• To cover design aspects for systems such as Radars, Navigation Comms, Integrated Comms, Integrated Combat Systems and Layout designs
• Work with other trades on integration design between Platform and Systems
• To prepare the General Arrangement Plan (GAP)
• Preparation of tender proposal and technical specifications for tender submission
• Establish Major Equipment Specifications and Selections
• To check and ensure equipment specification, technical information, functional description document, installation control document and interface design specification are correct and properly maintained, disseminate and use for the preparation of design work activities
• Planning and control of Basic design document schedule to support project milestone
• To develop of new designs and design concepts;
• To source for new design tools;
• To provide specialist technical assessment and analysis other in-house departments and external parties
• To continue updating the developing and expanding of the design database
• To participate in tests and sea trials, including HAT and SAT, where required
• Perform detail design calculation where necessary
• To follow up and resolve all the design issues raised by Owner, Classification and Statutory Authorities on all design documents promptly and timely to support the schedule, including on site checking and discussions
• To generate 2D arrangement drawings for major equipment
• To generate list of design drawing / document specific to each project
• To check working drawings and ensure that they conform to contractual technical specification, installation control documents, Classification and Statutory Rules/Regulations
• To keep abreast with current technological developments and products, Classification rules, military and industrial standards and other standards relevant to design activities.

Requirements:

• Degree in Electrical & Electronics Engineering
• 3 to 5 years of relevant experience in Marine related projects on Navigation Communications Systems and Radars (Fire Contol & Surveillance) will be advantageous
• Possess both project management and man management experience
• Ability to manage external and internal stakeholders will be critical for this role
• Proficiency in AutoCAD
• Only Singaporeans will be considered for this role

Additional Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

• Manage and lead a small team of 4 members to deliver the following HR services for internal stakeholders.
• Employee Assistance
• HR Information Systems
• Training and Development
• Career Development
• Organization Development
• Human Resource Planning
• Performance Management
• Selection and Staffing
• Talent Management & Succession
• Organization/Job Design
• HR Business partnering by having a deep understanding of our business Culture (Vision/Mission/Values/Principles) and ensuring that HR strategies and processes align and support our business goals. Inculcating this culture to all the staff during onboarding and orientation.
• Work with line managers to provide advice, support and follow-up on employee inquiries relating to administrative support, employee benefits, HR policies clarification and practices.
• Provide support to any other HR related project and duties as assigned.

Job Title: Senior Excavator Operator
Company: WF2 Engineering Pte Ltd
Location: Singapore
Industry: Construction (Plumbing & Sanitary)

Job Role:

We are seeking a highly skilled and experienced Senior Excavator Operator to join our dynamic team. The ideal candidate will play a critical role in ensuring the efficient and safe excavation operations for various construction projects related to plumbing and sanitary systems. As a Senior Excavator Operator, you will lead a team of operators, ensuring all excavation work is performed with precision and in compliance with safety regulations.

Key Responsibilities:

• Operate and manage various types of excavators to carry out excavation works for plumbing and sanitary system installations.
• Supervise and provide guidance to junior operators and ground crew to ensure tasks are executed correctly and safely.
• Inspect and maintain excavator equipment to ensure optimal performance, conducting routine checks and reporting any malfunctions or maintenance requirements.
• Coordinate with project managers, foremen, and other construction teams to ensure seamless workflow and adherence to project timelines.
• Follow and enforce all safety protocols and construction site regulations to minimize risk and prevent accidents.
• Plan and execute excavation work in a precise manner, considering site conditions and project specifications.
• Ensure proper digging, trenching, and backfilling techniques are followed to protect plumbing infrastructure.
• Document and report daily excavation activities, including progress, equipment status, and any issues encountered on-site.

Requirements:

• Minimum of 5 years of experience operating excavators in the construction industry, with a strong emphasis on plumbing and sanitary projects.
• Valid Class 4/5 driving license and certification in excavator operation (e.g., WSQ Heavy Construction Equipment Operation).
• Proven track record of managing excavation operations safely and effectively.
• Excellent knowledge of excavation techniques, trenching, and site safety procedures.
• Strong leadership abilities with experience guiding a team of operators.
• Ability to interpret construction plans and work efficiently under pressure.
• Strong communication skills and the ability to collaborate with diverse teams.
• Proactive, detail-oriented, and committed to quality work.
• Physically fit and able to work in outdoor environments and challenging conditions.