We are M&E Contractor company looking for Accounts Executive for our in-house Accounting Function and projects administrative work. Candidates with full set reporting exposure preferred but not a must.

Roles And Responsibilities

- Involve in AP/AR/GL activities and responsible for timely closing of monthly accounts, and yearly closing.

- Prepare/assist monthly cash flow report, management report, and supporting schedules timely, project budget review, variance analysis, cash flow forecast report, and any ad-hoc report.

- Assist with retrieving key information or number consolidation work.

- Prepare budgets for Headquarter Expenses and handle necessary forecast.

- Handling of GST Filing, and Corporate Tax.

- Liaise with auditors, government agencies, financial institutions, and tax agents.

- Review Claims to make sure claims are in line with HR policy.

- Assist to liaise with internal stakeholders to ensure necessary changes are communicated to improve the internal controls.

- Ensure compliance with company policies, processes, and procedures.

- Assist with related companies requirement in Japan, Malaysia and Vietnam.

- Other Ad-hoc task as assigned by your superior and administrative support and any ad-hoc requirement to the team, management, and related superior.

Requirements and Information

- A self-starter who is able to plan, organise and take initiative to meet job objectives and deadlines independently

- Self-motivated, resourceful, proactive, responsible hands-on and meticulous, and good proper document keeping.

- A supportive team player with good communication and collaboration skills - must be able to work with people within and outside of the accounts department

- Good analytical skills and a keen eye for details

- Ability to meet tight deadlines

- Worked similar role with minimum 2-3 years of relevant experience preferred but not a must. Fresh graduate with the right learning attitude are welcome to apply.

- Hands-on experience construction industry preferred but not must.

- Diploma in Accounting / Degree in Accounting / LCCI / ACCA or equivalent.

- Well-versed in MS Office, especially MS Excel, PowerPoint and Word

- Work Location: Jurong East, Singapore.

- Resume to include a recent photograph of the applicant.

- Salary shall be commensurate with experience.

- Restricted to Singaporean

Silversteel Engineering Pte Ltd is a leading provider of automation and robotics solutions, dedicated to transforming industries by replacing repetitive and labor-intensive tasks with advanced automation technologies.

As a Sales Associate, you will play a vital role within our team to identify and capitalize on market opportunities while delivering exceptional value to our clients. Your responsibilities will cover the full spectrum of the sales process, including lead generation, prospecting, negotiation, and project management.

We offer a company laptop and flexible work arrangements, allowing you to perform your role efficiently. Additionally, you will receive comprehensive training and close mentorship from our team to help you develop your skills and advance your career.

While prior sales experience is preferred, a basic understanding of engineering will be an advantage, though not a requirement. We welcome individuals with diverse backgrounds who are eager to learn and contribute to our growth.

Thank you for considering this opportunity. If you’re interested in joining our dynamic team, please submit your resume to [email protected]. Feel free to reach out if you have any questions or would like to learn more about the role.

We are looking for Mechanical Engineer :

Job Description:

- Provide support to operations maintenance staff in their work flow, maintaining, repairing and installation of HVAC units and Refrigeration systems. (Main tasks of the job scope)

- Mechanical general work

- Other ad-hoc duties as assigned

Job Requirements:

- Monday to Friday, 8am to 5pm

- Saturaday, 8am to 12pm

- Must be able to support OT on weekdays / weekends if needed

Interested applicant, please resume to [email protected]

Salary: $2400-$2800+allowances+OT=>$3300-$4000++

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Mon to Fri 3 rotating shift

Job Description

• Operate and monitor machinery on the assembly line to ensure smooth operation
• Conduct routine maintenance tasks on machinery as needed
• Identify and address any issues with machine operation
• Utilise mechanical and electrical knowledge to troubleshoot and repair production machines
• Conduct regular inspections to identify potential malfunctions and perform preventive maintenance

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Senior Supervisor Responsibilities:

• Making sure employees that report to you meet performance expectations.
• Giving instructions or orders to subordinate employees.
• Ensuring that the work environment is safe, secure and healthy.
• Meeting deadlines.
• Approving work hours.
• Ensure great customer service at all levels.
• Helping the team understand performance targets and goals
• Training or ensuring that workers are properly trained for their specific roles
• Scheduling work hours and shifts
• Coordinating job rotation and cross-training
• Sharing company updates, financial results, and new objectives with team members
• Assisting in resolving emergencies, such as a quality or customer problem that might be escalated to the team supervisor for handling

Senior Supervisor Requirements:

• Previous leadership experience.
• Excellent communication skills.
• Eye for detail and accuracy.
• Reliable, with high integrity and strong work ethic.
• Ability to work as part of a team.
• Professional appearance and attitude.
• Computer literacy.
• Proactive organizational skills.
• High school diploma.
• Ability to keep a positive attitude in a fast-paced environment.

Responsibilities:

• Manage and organize project documentation, records, and correspondence.
• Prepare reports, presentations, and meeting agendas.
• Handle general office administration tasks, such as ordering supplies and maintaining filing systems.
• Assist in scheduling and coordinating meetings, site visits, and project milestones.
• Record and distribute meeting minutes and follow up on action items.
• Support the team in tracking project timelines and deliverables.
• Act as the point of contact for internal and external stakeholders regarding administrative matters.
• Coordinate with vendors, consultants, and contractors to ensure seamless communication and documentation.
• Facilitate the flow of information between project team members.
• Process invoices, expense claims, and purchase orders related to project operations.
• Monitor and track project-related expenditures and maintain financial records.
• Manage calendars and appointments for team members.
• Ensure compliance with company policies and procedures in all administrative activities.
• Provide ad-hoc support as required by the project or management team.

Requirements:

• Diploma with 3-5 years of relevant working experience.
• Proficient in MS Office (Excel/Words/PowerPoint)
• Good communication and organizational skills
• Highly self-motivated, good working attitude and a good team player
• Independent with the ability to work with minimum supervision.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.

Job Description

• To install, repair and maintain mechanical equipment both manually and with mechanical tools
• Fabricates parts and sub-assemblies of machinery and related mechanical equipment to drawing specifications, using bench fitting tools
• Dismantles, inspects and refits parts and reassembles mechanical equipment
• Assembles and installs new mechanical fixtures
• Follow strictly to Risk Assessment before work commencement
• Ensure personal safety and others
• Handle tools and equipment with care
• Co-ordinate with other processes for continuous work flow and smoother job completion within job schedule
• Maintain good housekeeping

Requirements:

• Relevant trade certificate or equivalent
• Related experience in mechanical/electrical works
• Able to speak and understand simple English
• Physical works required and able to carry heavy load
• Knowledge on how to use simple tools and principles of fitting
• General knowledge in basic marine/electrical fitting

Responsibilities:-

• Provide admin support to operation as well as quality control & safety/health dept
• Assist in administrative duties and other duties as assigned

Requirements:-

• Minimum Diploma or equivalent
• Possess 2 years of experience preferably in oil & gas industry will be an advantage
• Matured personality, dynamic, self-motivated and result-oriented
• Able to work independently with min supervision
• Positive attitude and good personality
• Proficient in MS Office

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Scope:

• Responsible for all cleaning in and around office buildings.
• Cleans floors and toilets
• Sweeping, dusting and clearing of rubbish
• Spot cleaning glass and windows.
• Any ad-hoc cleaning duties as assigned

Job Requirements

• Physically fit and able to perform heavy cleaning duties like sweeping, mopping and so on.

Board Roles and Director Duties

Board’s Role

The Board’s role is to:

1. provide entrepreneurial leadership, and set strategic objectives, which should include appropriate focus on value creation, innovation and sustainability;
2. ensure that the necessary resources are in place for the company to meet its strategic objectives;
3. establish and maintain a sound risk management framework to effectively monitor and manage risks, and to achieve an appropriate balance between risks and company performance;
4. constructively challenge Management and review its performance;
5. instil an ethical corporate culture and ensure that the company’s values, standards, policies and practices are consistent with the culture; and
6. ensure transparency and accountability to key stakeholder groups.

Scope of Director Duties

Directors should be aware of their duties at law, which includes acting in good faith and the best interests of the company; exercising due care, skills and diligence; and avoiding conflicts of interest. Directors should also put in place policies, structures and mechanisms to ensure compliance with legislative and regulatory requirements, establish appropriate tone-at-the-top, desired organisational culture and standards of ethical behaviour.

While the duties imposed by law are the same for all directors, a listed Board will generally have different classes of directors (executive, non-executive and independent directors) with different roles:

• Executive Directors (EDs) are usually members of senior management, and involved in the day-to-day running of the business. Executive directors are expected to:

1. provide insights on the company’s day-to-day operations, as appropriate;
2. provide Management’s views without undermining management accountability to the Board; and
3. collaborate closely with non-executive directors for the long term success of the company.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scopes & Responsibilities

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Lead and participate in technical transfer activities and cross-functional meetings
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints
• Effectively manage and work with project CQV team to ensure timely delivery of projects
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications
• Responsible for investigation of deviations, development of corrective and preventive actions and implementation of change controls in a timely manner
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo
• Benchmark equipment performance (e.g., reliability, productivity) and determine improvement plans
• Periodically review and/or improve equipment safety, maintenance strategy, spare parts, and other continuous improvement opportunities to enhance reliability
• Responsible for management and oversight of team of CQV engineers
• Develop the best team by coaching and mentoring engineers to develop their technical competency and leadership skills

Qualifications

• Doctorate degree in Engineering OR
• Master’s degree in Engineering and 4 years of directly related experience in a pharmaceutical manufacturing site OR
• Bachelor’s degree in Engineering and 8 years of directly related experience in a pharmaceutical manufacturing site
• Able to work independently with minimal of no supervision
• Experience in managing various stakeholders expectations related to process equipment in biopharmaceutical
• Good communications skills, both oral and written, including presentation skills
• Good interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Strong analytical skills and knowledge of industry trends to identify potential improvement opportunities. Ability to combine technical problem-solving skills with business acumen to determine best business solution
• Working knowledge of biopharmaceutical processes such as chromatography, buffer / media tanks, viral filtration, tangential flow filtration is preferred. Process knowledge on inoculation, bioreactors, harvest, single use technologies and critical utilities will also be considered
• Experience in validation processes such as generation/execution of Installation/Operation/Performance qualification documentation
• Knowledge in Automation systems and processes such as RD’s, Delta-V, BMS, ladder logic and PLC
• Demonstrated project management skills (schedule/cost development, facilitation, collaboration, basic project management, completion and follow-up) and application of concepts
• Problem solving skills requiring the application of scientific and engineering theory and calculations and creative skills in the development of hypotheses and approach
• Flexibility to work off-hours
• Knowledge of Total Productive Maintenance, Reliability Centered Maintenance concepts is an added advantage

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Implement established project plan; monitor progress and performance against the project plan, identify, resolve or escalate operational problems to minimize delay
• Analyse project requirement and perform standard technical calculations
• Coordinate the activities of external contractors to project integration and satisfactory standards of service
• Estimate the costs, resources and time required to complete the assigned phase of an engineering project and monitor activities, allocate resources and assign tasks to ensure targets are met
• Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
• Set priorities, allocate tasks, and coordinate with project staff to meet project targets and milestones
• Any other duties to be assigned from time to time

Pre-requisites

• Bachelor’s Degree in Electrical Engineering
• Minimum 5 years of relevant experience in power and/or industrial plants construction projects required
• Hardworking, independent, resourceful, energetic and dynamic
• Ability to handle stress and be sensitive to deadlines.
• Proactive learner and ability to multi-tasks
• Willing to work long hours and under construction site conditions
• Project location: Jurong Island

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Supervise construction works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, design intent, approved drawings and site instructions by the supervising qualified persons
• Ensure that site personnel carry out their work in compliance with the prevailing regulations set up by the building authorities and government agencies of Singapore
• Perform tests to check the quality of materials
• Review project drawings and specifications, and raise any discrepancies and/or potential problems to the appointed Qualified Person and relevant stakeholders
• Attend meeting with qualified persons and relevant stakeholders
• Prepare progress reports
• Work under the control and direction of the appointed Qualified Person(s) when carried out his/her duties for the assigned project
• Any other duties as assigned from time to time

Prerequisites

• Diploma/Degree in Civil & Structural Engineering
• Accredited as a C&S Resident Technical Officer (RTO) by Institution of Engineering Singapore (IES) or Association of Consulting Engineers Singapore (ACES)
• Certificate in BCSS (Building Construction Safety Supervision) or other similar construction-safety certification
• Minimum 2 years of experience as a Resident Technical Officer (RTO)
• Able to read and interpret architectural drawings and details of construction projects
• Candidates with experience working in live plant conditions have added advantage
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

• Successful candidate will be helping the manager in engineering data entry, follow up on customers queries, general office administration work etc.
• Candidate should possess ITE certificate and above, preferably in engineering related field
• Proactive team player with the ability to work independently at times. Possesses initiative and good communication skills
• Proficient in basic computer skills, Microsoft Word, Excel
• At least 3 Year(s) of working experience in an office environment is preferred.
• Fresh graduates, mid-career switching, retirees/stay at home moms wanting to return to the work force are welcome to apply

Responsibilities

· To only carry out any lifting operation when a lifting supervisor is present or has approved the carrying out of such operation.

· To only engage in acts or manoeuvres per the standard practice or company’s SOP.

· To ascertain whether the ground conditions, on which a mobile crane is to be operated, are safe for travel and suitable for any lifting operation.

· To only use the crane for operations for which it is intended.

· To only manoeuvre or hold suspended loads over public roads or areas after that road or area has been cordoned off.

· To ensure that any outrigger, when it is required, is fully extended and secured.

· Before the start of every work shift, perform operational tests on all limit switches under no load conditions before any lifting operation is carried out and enter the results of such tests in a form or checklist specified by the management.

· To report any failure or malfunction of the crane to the lifting supervisor.

· To ensure that any stationary truck-mounted or wheel-mounted crane is adequately and securely blocked on a slope.

· To only hoist objects for which the weight has been ascertained.

· To only hoist loads if the path of the manoeuvre is clear and to report obstructions, if any, to the lifting supervisor.

· To only hoist loads when a certified signalman has received a clear signal.

· Attend daily toolbox meetings with supervisors and workers for effective consultation, communication and coordination before the commencement of work.

· Perform any other tasks as may be assigned by the supervisor.

· Ensure compliance with relevant government regulations and the company’s quality, safety, health and environmental (QSHE) policies, practices and procedures.

Requirements

· Minimum 5 years of working experience in a similar capacity in marine or related industry.

· Knowledge and understanding of construction safety rules and procedures.

· Valid crane operator license.

· Physically fit due to the requirement to climb in and out of the crane cabin and to see and hear lifting supervisors, signalmen, HSE personnel etc.

· Good communication skills.

· A team player with the ability to work independently as well as in a team.

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Supervise and ensure that mechanical work activities are performed in a safe and timely manner while adhering to specifications and codes
• Responsible for organising mechanical works, delegating tasks and managing workers on site
• Assist the Mechanical Engineers in planning and monitoring of construction work progress.
• Any other duties to be assigned from time to time

Prerequisites:

• Minimum 3 years' relevant work experience in construction industry
• Knowledge of static and rotating equipment and/or Steam or Gas Turbines
• Ability to manage and handle workers
• Possess a strong commitment to workplace safety

Job Description

• Prepare, manage, and facilitate design drawings utilizing BIM, Rino, Grasshopper and CAD technologies.
• Ensure all models are compatible and that BIM data is accessible to all project participants.
• Oversee coordination between architectural and structural interfaces, collaborating with main contractors and other trades for effective cross-team support.
• Work closely with the design team and other relevant departments to ensure all drawings meet design specifications.
• Manage design changes and revisions, addressing any discrepancies and queries between design and project teams.
• Attend site meetings as required and perform additional tasks as needed.

Requirements

• Degree in Architecture, Civil Structural Engineering, or a related field.
• Minimum of 4 to 5 years of relevant experience in construction and architectural projects.
• Proficiency in Revit, Navisworks, Rino, Grasshopper, AutoCAD, and MS Office.
• Knowledge of DGN, DWF, IFC, and MicroStation is a plus.
• Strong project management and decision-making skills.
• Ability to work effectively as part of a team as well as independently with minimal supervision.

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

Job Summary:

We are seeking a dedicated and skilled Workshop Executive to manage the fleets of vehicles maintenance project. The successful candidate will be responsible for overseeing the maintenance, repair, and efficient operation of our vehicle fleet, ensuring all project milestones and deadlines are met.

Key Responsibilities:

• Manage the day-to-day operations of the Automotive workshop, including scheduling and supervising maintenance and repair activities.
• Ensure all vehicles are maintained in optimal condition and comply with safety standards.
• Coordinate with suppliers and vendors for parts and services.
• Monitor and manage the fleet budget, ensuring cost-effective operations.
• Maintain accurate records of all maintenance and repair activities.
• Develop and implement preventive maintenance programs.
• Train and supervise workshop staff, ensuring high performance and adherence to safety protocols.
• Collaborate with other departments to ensure the smooth execution of the project.

Requirements:

• Diploma in Mechanical Engineering, Automotive Technology, or a related field.
• Proven experience in fleet management, vehicle maintenance, and workshop operations.
• Strong knowledge of automotive systems and repair techniques.
• Excellent organizational and project management skills.
• Ability to lead and motivate a team.
• Strong communication and interpersonal skills.
• Proficiency in using fleet management software and tools.
• Ability to work under pressure and meet tight deadlines.
• Valid driver’s license

The Singapore Centre for 3D Printing (SC3DP) offers a full range of additive manufacturing services, from design and infrastructure to production and validation. With advanced technologies such as topology optimization, generative design, and bioinspired design, SC3DP creates optimized products using a variety of novel materials and printing processes, including hybrid printing, post-processing, and emerging technologies. Sustainability is a top priority for SC3DP, which offers material development and control services that combine artificial intelligence, big data, and other digital tools for process optimization, as well as non-destructive testing for AM parts. Backed by a team of experts and a state-of-the-art facility equipped with the latest equipment and technologies, SC3DP is committed to leading the way in sustainable additive manufacturing research and development.

We are looking for a Research Associate to develop novel 3D printing technologies in the area of large-scale 3D cementitious structural printing.

Key Responsibilities:

Structural Printing

• Large-scale structural modules with Robotic arm and Gantry system.
• Programing code for Robotic arm and Gantry system
• Operating the printing system including mixer, pump, robotic arm, and Gantry system

Printing Path Optimisation

• Computational design of 3D concrete printing structure
• Optimise the printing path to ensure the smooth structure surface finish and excellent mechanical properties.
• Conduct structural testing, such as tensile, compression, flexural and shear tests
• To investigate the key parameters in the design of 3D printing concrete specimens on the structural performance.
• Conduct numerical analysis using finite element modelling of structural elements by using FEM
• Data acquisition and Image processing with MATLAB

Experimental Investigation

• Design and fabrication of experimental facilities including nozzles and inline control systems based on the theoretical model and CFD simulation.

Job Requirements:

• Master degree in 3D cementitious material printing, additive manufacturing or Civil Engineering, with a specialization in Structural Engineering
• At least 2 years of research experience in 3D concrete printing (3DCP) with strong knowledge on 3DCP Process and path planning, Design for 3DCP, tool path and machine code generation
• Computational Design and 3D concrete printing
• Possess good knowledge of structural analysis, concrete and steel materials, and finite element analysis
• Strong knowledge and experience in large scale 3D cementitious material printing
• Excellent programing code for robotic arm and gantry system operation.
• Strong experience in parametric modelling software like Rhinoceros 3D, Grasshopper, CAD/CAE tools like MasterCAM, Robotmaster.
• Ability to work on structural and surface optimization
• Excellent interpersonal, problem solving and analytic skills
• Able to work in a multi-disciplinary team

We regret that only shortlisted candidates will be notified.

About the Role:

We are seeking a seasoned Senior Product Development Manager with over 10 years of experience specializing in the design and development of automation products for bioenvironmental applications. This position focuses on driving innovative projects in Industrial Automation, Bio-Environmental Monitoring, and Consumer Electronics, managing the complete product development lifecycle to deliver high-quality, technically advanced, and manufacturable solutions.

You will bring in-depth knowledge of electronics, embedded systems, full-system automation, and mechanical integration to design and guide fabrication teams, producing innovative products and prototypes for industrial and academic clients.

Key Responsibilities:

1. Product Development & Lifecycle Management

• Lead the entire product lifecycle, from concept creation to batch mass production, ensuring on-time delivery and cost-effectiveness.

2. Circuit Design

• Design and develop high-performance analog, digital, and mixed-signal circuits, focusing on low-noise designs, high-resolution ADC/DACs, and high-speed communication interfaces.

3. PCB Design & Manufacturing

• Execute PCB design using tools like Altium Designer, incorporating Design for Manufacturability (DfM) and Design for Testability (DfT) principles.

4. Embedded Systems Development

• Program and debug firmware for microcontrollers (MCUs) and system-on-chips (SoCs), optimizing for performance and energy efficiency.

5. Data Communication Systems

• Develop robust communication protocols, including I²C, SPI, RS232, RS485, and other bus systems, integrating sensor networks and actuator controls.

6. Mechanical Integration

• Collaborate with and review mechanical designs using tools like SolidWorks and AutoCAD, ensuring seamless electronic-mechanical compatibility.

7. System Testing & Quality Assurance

• Conduct Design Failure Mode and Effects Analysis (DFMEA), tolerance analysis, reliability testing, and EMI/EMC validation to meet regulatory and quality standards.

8. Bio diagnostics

• Apply hands-on expertise in bio diagnostics, driving the development, testing, and optimization of diagnostic tools and processes.

9. Prototyping & Troubleshooting

• Oversee prototype development, testing, and root-cause analysis to resolve hardware and firmware issues promptly.

10. Interdisciplinary Collaboration

• Work closely with mechanical, software, and quality assurance teams to deliver integrated and cohesive product designs.

11. Documentation & Compliance

• Maintain comprehensive project documentation to ensure adherence to ISO standards and regulatory requirements.

Requirements:

Technical Expertise:

• Proficient in Altium Designer; experience with OrCAD or Eagle is a plus.
• Advanced programming skills in C, C++, and Python, with experience in embedded systems and RTOS environments.
• Strong knowledge of analog and digital design principles, including power electronics and high-frequency PCB layouts.
• Hands-on experience with microcontrollers, FPGA programming, and single-board computers (e.g., Raspberry Pi).
• Expertise in communication protocols: I²C, SPI, RS232, RS485, UART, and their applications in IoT systems.
• Experience in sensor integration, including temperature sensors, photo detectors, and flow meters.
• Proficiency in mechanical CAD tools for cross-disciplinary collaboration; SolidWorks and AutoCAD preferred.
• Practical experience in GUI development and familiarity with Linux-based environments (e.g., Ubuntu).
• Knowledge of P&ID diagrams, microfluidic system design, and control methodologies.
• Strong analytical and problem-solving skills, with expertise in (D)FMEA, design optimization, and quality management systems.
• In-depth understanding and hands-on experience in bioprocessing systems, particularly in E. coli detection and diagnostics.
• Expertise in developing and implementing diagnostic methods for microbial monitoring, including biosensors and other analytical tools.

Industry Expertise:

• Experience in water quality monitoring systems and microbial monitoring technologies.
• Familiarity with fluidic control systems, including valves, pumps, and flow control mechanisms.

Soft Skills:

• Excellent communication skills, with the ability to document and present technical concepts effectively.
• Proven ability to excel in fast-paced, collaborative environments.
• Proficiency in MS Office tools (Word, Excel, PowerPoint); experience with Power BI and Visio is a plus.

Key Responsibilities:

• Manage full accounts cycle, including bank reconciliation and journal entries.
• Ensure accurate data entry in for all transactions.
• Prepare financial data for entry into the financial system
• Keep accounting records and bank statements
• Ensure timely, accurate month-end and year-end closing
• Prepare and file GST returns
• Preparation of tax computation and tax planning
• Filling tax returns on time and updating the management about new changes in rules and regulations.
• Liaise and coordinate with external auditors and tax agents;
• Ensure accounting deadlines are met;
• Review subsidiary accounts
• Other ad hoc duties

Job Requirement

• Diploma in Accountancy or equivalent.
• Minimum 2 years of relevant accounting experience.
• Have prior experience in handling full set of accounts and statutory reporting
• Independent to fulfil tasks and a team player to perform tasks in the company workflow

Responsibilities

• Perform Reliability, Maintainability and Supportability (RMS) analysis, to ensure an effective through life support capability package to support the System.
• Engage design engineers on design specifications and influence Reliability and Maintainability (RAM) in their design.
• Engage customers and contractors, and to ensure RAM and ILS deliverables are on schedule and of quality.
• Lead ILS team of technical writers, technical trainers and supply support management to ensure supportability of the Systems.

Requirements

• Degree in Mechanical Engineering or Mechatronics Engineering or equivalent.
• Preferably RAM and ILS knowledge. Training / OJT will be provided, if not equipped with basic statistics skills.
• Preferably knowledge in either Automotive and/or Artillery systems.
• Meticulous in quantitative analysis and strong in statistical analysis.
• Good leadership skills and project management skills.
• Strong communication & interpersonal skills.
• Entry Level candidate are welcome to apply