Job Descriptions:

Assist in foreigh workers management pertaining to:

• MOM work passes application, renewal and cancellation
• Month end payroll process
• Prepare HR letters, eg. employment contracts, increment, warning, etc.
• Course registration, renewal and arrangement
• Dormitory matter (check in/out)
• Maintain employee records
• Daily attendance report
• Other ad-hoc duties when assigned
• General admin duties, eg. handling email, phone call and incoming mail.

Requirement:

• At least 1 years experience
• Good communication & interpersonal skills

Job Description:

• Familiar with HVAC offshore / marine regulations and rules, such as, SOLAS, ABS, DNV, NORSOK, ASHRAE, ISO 7547, 8861 etc.
• Preparation of cooling load calculation, ventilation system design, air conditioning design, pressure drop calculation, duct sizing, grille/diffuser sizing, material take off etc.
• Responsible for HVAC equipment sizing and selection.
• Preparation of P&ID, D&ID and ducting layout drawings etc.
• Preparation of electrical single line diagram, cable block diagram, control diagram, termination diagram, electrical load calculation HVAC system logic diagram, HVAC Cable schedule etc.
• Ensure the HVAC system design and equipment selection are compliance with client specification, class regulation and hazardous area classification.
• Submission of HVAC/Architectural Design document and drawings for class approval.
• Technical submission (drawings and document) checking and revision control.
• Preparation of technical specification, technical bid evaluations.
• Interface with other disciplines and provide necessary guidance on HVAC/Architectural installation.
• Technical Clarification with Client and Vendor.
• Involved actively and monitoring the engineering, procurement, construction and commissioning HVAC system and architectural work.
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.
• Instruct supervisors/foreman on a day-to-day basis for work progress.
• Liaise with representatives, classification society surveyors and other to comply with inspection requirements.
• Resolve any technical problems or issues faced at work site.
• Monitors progress and instruct supervisors and foreman on safety and quality.
• Maintain the file copy of all latest revision drawings, approved procedures, client site instruction, project specifications, raised AFI and client signed reports for materialreceiving inspection and mechanical works for internal and external audits.
• Prepare Red-Line Mark-up as per site changes and submit to Engineering Dept to prepare as-built.

Job Requirement:

• Diploma/Degree in Mechanical Engineering
• At least 5 year experiences in Bolt Torque and Flange Management in Marine shipyard
• Experience in Marine HVAC installation and testing
• Experience in troubling shooting HVAC system and equipments

Production Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. To perform any other duties & Responsibilities assigned by superiors from time to time.

5. Ability to demonstrate and implement cost -saving measures.

6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

• General administrative task & support
• Handling accounts receivable & accounts payable
• Handling general Accounting Tasks
• Administering payroll & maintaining employee records
• Handle MOM matters including work pass application / renewal / cancellation
• Workers dormitory arrangement.
• Coordinate with training & Development.
• Administer leave / MC records.
• Monthly CPF submission.
• Prepare employment letter, confirmation letter, warning letter, etc.
• Support admin function for purchasing, report typing and invoicing.
• Licence renewal & preparation of documents for submission.
• Prossess good organization, communication and people's skills
• Any ad-hoc HR & admin duties assigned.

· Develope a marketing strategy in accordance with the overall company goals and vision

· Understanding Company Products and doing Market Research to identify specific target groups and implement niche marketing strategies

· Grow the social media community

· Implement and manage a multi-channel marketing strategy

· Grow online marketing partners (digital publications or influencers)

· Copywriting and copy editing - Both internal and external marketing materials

· Create and execute highly engaging, Skills and experience in creative content writing

· Cross-platform social media & marketing campaigns (design, call to action and content)

· Manage content - copywriting & design. Handle content schedule and posting of content

· Experience in attaining PR coverage both online and offline

· Simple research work

· Assisting with ad hoc duties as required

Requirements:

· Social media analytics and ads experience is preferred. Social media management and community managers preferred.

· Exceptional communication skills, both written and verbal. Strong written English is a MUST

· Ability to multitask and meet tight deadlines

• General administrative task & support
• Handling accounts receivable & accounts payable
• Handling general Accounting Tasks
• Administering payroll & maintaining employee records
• Handle MOM matters including work pass application / renewal / cancellation
• Workers dormitory arrangement.
• Coordinate with training & Development.
• Administer leave / MC records.
• Monthly CPF submission.
• Prepare employment letter, confirmation letter, warning letter, etc.
• Support admin function for purchasing, report typing and invoicing.
• Licence renewal & preparation of documents for submission.
• Prossess good organization, communication and people's skills
• Any ad-hoc HR & admin duties assigned.

Production Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.
2. Good communication skills with Ship Owners and Superindents.
3. Good time Management and work Independently.
4. To perform any other duties & Responsibilities assigned by superiors from time to time.
5. Ability to demonstrate and implement cost -saving measures.
6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

Production Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.
2. Good communication skills with Ship Owners and Superindents.
3. Good time Management and work Independently.
4. To perform any other duties & Responsibilities assigned by superiors from time to time.
5. Ability to demonstrate and implement cost -saving measures.
6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

Job Responsibilities:

• Liaise with the construction team to prepare documents for Request for Quotation (RFQ) or Open Tender.
• Source potential tenderers/subcontractors and send out invitations for RFQs.
• Assist on management of materials and equipment at the construction site.
• Coordinate queries and clarifications between tenderers and construction team during RFQ stage.
• Coordinate post-tender interviews between tenderers, construction team, QS team and contracts team.
• Assist QS manager and contracts manager with quantity surveying matters relevant to Sub-Contract, Works Order and Purchase Order.
• Assist contracts team in administration of subcontracts.
• Handle payment requests received from subcontractors and suppliers.
• Responsible for quantity calculation of construction drawings, preliminary material research and market survey.
• Assist to evaluate and process vendor claims as needed.
• Any other adhoc tasks assigned by QS Manager / Contracts Manager.

Job Requirements:

• Min. Bachelor’s Degree in Engineering or related field of studies.
• At least 3 years of experience, preferably in Quantity Surveying.
• Experienced working as Main Contractor
• Willing work at West area
• Exprerience in Marine Project is prefered
• Able to work under pressure and work under minimal supervision.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description & Requirements

· Ensuring all works carried out meet company’s quality standards and requirements

· To co-ordinate and supervise site workers, monitoring project progress and schedule

· To liaise closely with appointed Main-contractors, sub-contractors and suppliers or their appointed agents on all on-site matters

· Ensure all works are carried out in accordance to the drawings, specifications, construction plan, procedures, work instructions etc

· Ensure compliance with the prevailing legislative Work Safety rules and/or measures

· Assist Engineering and Production Team with the preparation and submission of documents for work commencement and upon project completion

· Other ad-hoc duties assigned from time to time

Job Requirements :-

· Minimum 5 years supervisory experience in aluminium industry

· Able to understand design drawings and meet clients &/or designers requirements

· Meticulous with positive work attitude

· Strong sense of accountability and ability to quickly prioritize tasks based on urgency in a fast placed environment

· Excellence analystical, communication, organizing, interpersonal and supervisory skills

· Independent but also a team player

· Able to start work on short notice would be an advantage

Job description:

· Responsible for organizing, supervising, and directing project construction activities to successfully meet project specifications and schedules as Contractor’s principal representative to Owner at the jobsite.

· Forms preliminary construction plans including organization, staffing, and administration, subject to review by the Project Manager.

· Studies specifications to plan construction procedures; monitors procurement of equipment and materials to be delivered to conform to work schedules.

· Finalizes assignment of field construction personnel and mobilization plan of manpower; assembles members of organization at the start of the project.

· Authorizes work and services to be purchased from outside sources or subcontracted at the jobsite in accordance with construction policy and project economics.

· Confers with or directs supervisory personnel and subcontractors engaged in planning and executing work procedures, interpreting specifications, and coordinating various phases of construction to prevent delays.

· Authorizes the field construction schedule and field construction procedures to ensure good workmanship, safe construction, and on-schedule performance.

· Acts as liaison between Contractor and Owner’s representatives in the interpretation of specifications.

· Receives from subordinates’ reports on progress, materials, manpower, and costs, and directs the work schedule.

· Inspects work in progress to ensure that workmanship conforms to specifications. Develops new construction methods to satisfy unusual circumstances and changes from the original plan.

· Approves jobsite expenditures for labor and services by reviewing cost records, workmanship, material quality and quantity, scheduling, and procurement.

· Approves Safety procedures for all site workers to abide.

Requirements:-

• Diploma or Degree holder in Engineering field
• 5 years’ experience least in oil & gas, chemical construction industry
• Experience in executing construction in process/petrochemical plants and storage terminals
• Degree holder in relevant major
• Independent, resourceful, diligent and good team player.
• Able to lead supervisors & workers to comply, fulfil projects requirements, meeting schedules.
• Expected to perform hands-on duties with acquired skills and knowledge.

Responsibilies:

- Familiar with documents submission to relevant government authorities

- Responsible for measuring quantities and taking off

- Prepare Variation Orders, monthly Progress Claims, final claims

- Prepare and submit Material submission form to client for approval

- Attend site meeting when necessary

- Prepare Tender and contract documents, including bills of quantities with the architect and/ or client

- Perform risk, value management and cost control

- Prepare and analyze costings for tender

- Allocate work to subcontractors

- Provide advice on contractual claims

- Understand the implications of health and safety regulations

- Identify, analyze and develop responses to commercial risks

- Undertake cost analysis for repair and maintenance project work

- All other QS related job

Qualifications:

- Diploma/ Degree in Constructions Building or its equivalent

- Ability in contract negotiation, contract administration and variations orders

- Able to work independently, analytical with excellent problem solving skills, proactive.

- Knowledge of AutoCAD, MS Excel, MS Word

- Possess knowledge in Cubi cost software OR any other relevant software will be an added advantage

- Possess minimum Diploma/Degree in Quantity Surveying / Electrical / Mechanical or its equivalent with 1- 2 years of relevant experience

- Able to start in a short notice period

With the following information in your resume

• Current and Expected salary
• Reason for leaving
• Date of availability
• Education
• Work experiences and job responsibilities background

We regret that only shortlisted candidates will be contacted

Responsibilities

· Monitor strict compliance of “Permit to Work” system at worksite & explain the importance to workers at the time of safety talk/toolbox meeting.

· Coordinate Environmental Control Committee Meeting and implement all environmental control programs.

· Maintain mandatory records and other documentation as required by the regulatory authorities.

· Ensure compliance of operations with NEA and EHS regulations

· Prepare Site Environmental Control Report on a regular basis

· Conduct environmental control audit and investigations

· Able to maintain environmental requirements in line with OHSAS 18001:1999

· Ensure compliance with environmental regulations, develop environmental control plan, site clean-up plans & monitor their completion

· Advise and liaise with Project Manager and construction team on all matters pertaining to Health, Safety & Environment (HSE)Ensure compliance and practice of Company's QEHS Management System

· Oversee and lead the Safety team & subcontractors in the implementation of Company’s safety systems at sites

· Inspect and examine the workplace to ensure workplace safety compliance

· Identify safety, environmental health non-compliance and recommend measures to rectify

· Liaise with authorities and clients on matters pertaining to environmental, workplace safety issues

· Conduct & organize internal / external WSH trainings for staffs.

· Conduct incident investigations & propose corrective actions.

· Review OHSMS and provide recommendations for improvement of safety.

· Conduct regular inspection and audits on the safety provisions.

· Conduct, review & submit Risk Assessments.

· Prepare safe work procedures for site activities.

Requirements:

· Registered ECO & ECMO with NEA and PUB in Singapore

· Experienced in Construction Projects in Singapore as full time.

· Experience in managing a construction site Earth Control Measure

· Noise monitoring certificate

· Willing to work West Area.

· Good Communication Skills in reading, writing, and speaking

Roles & Responsibilities

• Manage construction activities to make sure that compliance with cost, time, contract specification, health and safety, quality and environmental requirements are achieved; manage the delvelopment and implementation of programmes associated with project plans.
• Oversee and direct construction projects from conception to completion.
• Participate in the evaluation of the suitability of subcontractors.
• Review the project in-depth to schedule deliverables and estimate costs.
• Liaise with subcontractors and other service providers in relation to programmes and workmanship.
• Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations.
• Coordinate and direct construction workers and subcontractors.
• Ensure quality construction standards and the use of proper construction techniques.
• Liaise with the safety personnel to undertake risk assessment and develop suitable control methods.

Job Requirements

• Minimum 12 years of engineering experience with Degree in Civil Engineering recognised by the PE Board or qualification acceptable to the Commissioners of Building Control as eligible for application as a Resident Engineer or recognised Degree in relevant field subject to the acceptance of the Engineer.
• At least 10 years of experience in managing construction teams for projects of similar scale and complexity.
• Competent in conflict and crisis management.
• Leadership and human resources management skills.

Skills and Knowledges

• Leadership and project management skills.
• Persistence and determination.
• Able to use your initiative.
• Excellent verbal communication skills

• To repair bins, fabricate bins, welding of the bins and support on all mechanical equipment, pumps, conveyors, gearbox and etc in plant as per schedule and upon breakdown
• To do in house welding, fabrication and plumbing works as per requirements by operation
• Attend any mechanical breakdown immediately and to run back the plant
• Installation, modification and fabrication of new equipment & machines in plant needed by operation
• To minimize equipment break down and down time, by doing proper and effective maintenance & repairs by problem identification & problem solving
• Other ad-hoc duties as assigned

Job Description

Sea Forrest Engineering Pte Ltd (a subsidiary of BH Global Corporation Ltd) seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Responsibilities

1) Electrical Design

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Requirements

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

Job Description:

• Manage & Optimize the Security operation in the facility
• Audit & Inspection for facility security
• Carry out surveillance on Safety violations, vandalism or suspicious activities or persons on the premises
• Perform regular perimeter checks and patrols
• Operate and maintain security control equipment
• Maintain logs and records of occurrences, submit incident reports where necessary
• Preparation and filing of documents in relation to Security service & Commute Bus operation
• Manage & Coordinate with Security service companies(Subcontractor) and the others
• Manage safety works for company and subcontractor.
• Any other adhoc duties as assigned

Requirement:

• Strong building and Security service knowledge with hands-on experiences
• Proven experience in Security service management in a large-scale facility (Minimum 5 years of experience in related field)
• Report writing and presentation skills
• Able to perform shift work, work on weekends and public holidays
• Skills for setting up SOP for facility securities
• Expertise & Experience in planning & installation for Security Facilities necessary
• Experience for security control in VIP visiting, large scale ceremony and so on
• Candidate with Security Service Cert preferable (Senior Security Supervisor or above)

Job Highlights

• The job will offer you excellent opportunity for promotion.
• Good working environment.
• The Company has a broad market and good prospects for development

Job Description

1. Assist Sales Manager for the sales and marketing for local and overseas market and are required traveling overseas on regular basis to carry out duties.

2. Required to co-operate closely with all other department of the company in order for the contact and/ or project can be executed effectively and efficiently.

3. Assist Sales Manager decision making and overview the company daily operation to ensure the operation run smoothly.

4. Assist Sales Manager to preparing itinerary schedule before traveling to overseas, and contact to the person for arrangement for meeting.

5. Assist Sales Manager to monitor and ensure branch offices run smoothly for everything and keep report to the head quarter in routine basis.

6. Assist Sales Manager to prepare power point, company brochure, project reference etc. for presentation and generate commercial agreement and/ or technical agreement for meeting with clients.

7. Assist in decision making for procurement in searching, purchasing and negotiation of purchase and delivery terms of equipment and materials for production.

8. Able to read GA (general arrangement) to prepare material cost list and generate quotation, Technical specification, tender document etc. and reply to the enquiry of customer require.

9. Visit to the local shipyard frequently for gather more information on new project as well as the exiting project, and at the same time build up a good relationship between shipyard and the company.

10. Assist other Marketing related jobs not mentioned.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 1 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

· Liaise with sub-contractors, suppliers & other parties involved in the project.

· Liaise with construction/design team to prepare document for Request for Quotation (RFQ) or Open Tender.

· Assist Project Contract Manager with quantity surveying matters relevant to Sub-Contract, Works Order and Purchase Order.

· Project administration and documentation include preparation of interim valuations, pricing and agreement of contract variations, update claim submissions, preparation of final accounts.

· Sourcing for supplier and sub-contractor, collate price comparison and costing summary.

· Evaluation and certification of sub-contractors’ progress payments.

· Good knowledge of reading specifications and building drawings.

· Prepare project budgeting and costing reports.

Requirements

· At least 3 years’ working experience in Quantity Surveying in main contractor.

· Experience with LTA or M&E projects.

· Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Quantity Survey, Civil Engineering / M&E.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience
• Site Location West Region

We are hiring a skilled and experienced Construction Manager to join our team for a challenging and rewarding role in the construction industry. The ideal candidate should have a minimum of 10 years of experience in construction, with a strong preference for experience in Land Transport Authority (LTA) Singapore’s SPPG (Standard Provision for Roadworks and Streetworks) projects.

Key Responsibilities:

• Oversee and manage construction projects from inception to completion.
• Ensure timely and quality execution of projects according to specifications, budgets, and deadlines.
• Coordinate and collaborate with the Project Office and other key stakeholders to ensure seamless communication and project alignment.
• Actively participate in project management meetings and provide regular project updates.
• Monitor and manage site activities, ensuring compliance with safety regulations and industry standards.
• Resolve any issues or challenges that arise on-site, ensuring smooth workflow.
• Manage project teams and subcontractors, providing leadership and guidance to ensure optimal performance.
• Ability to handle multiple tasks, work under pressure, and meet tight deadlines.
• Ensure proper documentation and reporting in line with company and client requirements.

Key Requirements:

• Minimum 10 years of experience in the construction industry, with a strong background in managing large-scale infrastructure projects.
• Experience in Land Transport Authority (LTA) Singapore's SPPG projects is highly preferred.
• Proven ability to work under pressure and manage long working hours, including a 6-day workweek.
• Excellent communication and coordination skills, with the ability to work effectively with project teams, clients, and other stakeholders.
• Strong problem-solving skills and the ability to make decisions in fast-paced environments.
• Ability to attend and contribute to project management meetings effectively.

Salary & Benefits:

• Salary: $4,300 to $4,600 per month, commensurate with experience.
• Opportunity to work on high-profile and impactful projects in the construction and infrastructure sector.
• Dynamic and fast-paced working environment with opportunities for career growth and development.

If you are an experienced and dedicated Construction Manager with a passion for delivering successful projects and meet the qualifications above, we would love to hear from you!

• Leadership: You set the tone for your team’s work environment. By giving clear directions and setting an example, you inspire others to follow suit. For instance, if punctuality is a priority, you’re always on time.
• Communication: Acting as a bridge between upper management and your team, you relay information effectively. You might, for example, convey new company policies and gather feedback from your team to share with higher-ups.
• Performance Management: You track your team’s productivity and quality of work. Suppose a team member is underperforming; you provide constructive criticism and potentially formulate a performance improvement plan.
• Training and Development: You identify skill gaps and recommend training programs. You could mentor a junior team member, enhancing their knowledge for better progress.
• Resource Management: You’re entrusted with managing the tools and materials your team needs. You would allocate these resources wisely to prevent bottlenecks in the workflow.
• Problem-Solving: When issues arise, it’s your job to identify solutions. If there’s a conflict between team members, you would mediate and help find a middle ground.