Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 10 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilities:

1. Supervise daily operations, ensuring compliance with safety and recycling protocols.

2. Coordinate and assign tasks to staff, including sorting, processing, and handling of recyclable materials.

3. Monitor and maintain equipment and machinery to ensure proper functioning and timely maintenance.

4. Inspect and ensure the quality of recycled materials meets company standards.

5. Manage inventory of recyclable materials and submit daily operational reports to management.

6. Address customer inquiries and complaints professionally to ensure satisfaction.

7. Enforce punctuality, discipline, and adherence to company policies among staff.

8. Ensure cleanliness and organization of the recycling facility.

9. Perform any additional duties assigned by management.

Requirements:

1. At least 2 years of supervisory experience, preferably in the recycling or manufacturing industry.

2. Strong knowledge of recycling processes and safety protocols.

3. Ability to work extended hours, including weekends and public holidays.

4. Must be flexible and willing to report to work at short notice.

5. Able to travel to various locations when required.

6. Strong leadership skills and the ability to manage and motivate a team effectively.

7. Good communication skills with the ability to handle customer interactions professionally.

8. Physically fit to handle tasks involving standing, lifting, and moving heavy materials.

Responsibilities:

• Analyse and diagnose vehicle defect
• Perform mechanical, pneumatic and electrical repair and overhaul maintenance services.
• Attend and provide recovery support to breakdown vehicles.
• Handle facilities and equipment maintenance.
• Any other ad-hoc tasks assigned by superior.
• Experience in EV

Requirements:

• Nitec / Higher Nitec / Diploma in Electrical / Mechanical / Automotive engineering / EV
• Experience in automotive working environment will be added advantage.
• Analytical and fault-finding skills.
• Process a class 3 and 4 driving license.
• Able to communicate and write in English.
• Service-oriented mindset.
• Prepared to be on 24 hours standby for emergency recovery support.

Responsibilities:

• Liaise with sub-contractors, suppliers & other parties involved in the project.
• Liaise with construction/design team to prepare document for Request for Quotation (RFQ) or Open Tender.
• Assist Project Contract Manager with quantity surveying matters relevant to Sub-Contract, Works Order and Purchase Order.
• Project administration and documentation include preparation of interim valuations, pricing and agreement of contract variations, update claim submissions, preparation of final accounts.
• Sourcing for supplier and sub-contractor, collate price comparison and costing summary.
• Evaluation and certification of sub-contractors’ progress payments.
• Good knowledge of reading specifications and building drawings.
• Prepare project budgeting and costing reports.

Requirements:

• At least 2 years’ working experience in Quantity Surveying in main contractor
• Experience with LTA or building projects
• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Quantity Survey or equivalent

Job Description:

• Plan, manage and maintain the BIM data in compliance with project requirements

• Create and maintain the project template files to assure standards.

• Coordinate with other discipline and engineers to manage and resolve the clashes.

• Prepare Transmittal on drawings for submission or issuance to sub-contractors

• Supersede and updated the current revision status

• Compile of As-built drawing upon project completion

• Minor coordination of Architectural / Structural / M&E drawings

• Detailing and documentation of working drawing

• Any other duties assigned

Job Requirement:

• Minimum 2 years experience in LTA Project and have relatable experiences on Drafter.

• Able to work well in teams and independently

Job Responsibilities:

• Work closely with customers to understand their current cyber operations and establish their cyber threat intelligence requirements
• Design operational use cases to adopt cyber threat intelligence in their operations
• Lead a development team and chart the product development roadmap
• Develop and customize plugins to adapt with COTS CTI Products
• Assist in training the machine learning model for the Artificial Intelligence (AI) Engine
• Work closely with project team to deliver project which includes system integration and deployment of hardware and software
• Acceptance Testing and Documentation

Job Requirements:

• Good understanding in Cyber Threat Intelligence Workflows, STIX and MITRE Framework
• Experience in working with different CTI Platform available in the market
• Knowledge in Linux OS is preferred
• Experience in Virtualization, Containerization and Network.
• Well verse in Python development and CSS styling is a must.
• Experience in ELK Stack, MinIO, GraphQL, RabbitMQ
• Candidate has a passion for cybersecurity domain
• Good troubleshooting and problem solving skill
• Work location: Jurong East

We are seeking a highly skilled and motivated Network Architect to join our esteemed team. As the Network Architect, you will be responsible for overseeing the design, planning, and successful implementation of critical network infrastructure projects. Your technical expertise and leadership will be pivotal in ensuring our network solutions align with business goals and exceed industry standards.

Responsibilities:

• Collaborate with stakeholders, including project managers, network engineers, system architects, and customer business leaders, to design and develop robust network architectures that meet project requirements and business objectives.
• Demonstrate expert knowledge of networking technologies, protocols, and infrastructure components, good knowledge of system and security technologies, protocols, and infrastructure components to make informed decisions regarding equipment selection, network design and integration.
• Evaluate and manage vendor relationships, negotiating scope of work and ensuring compliance with project specifications and quality standards.
• Lead and mentor a team of network engineers, providing technical guidance, assigning tasks, and fostering a collaborative and productive team environment.
• Conduct thorough testing and troubleshooting activities to validate network functionality, performance, and security, resolving teething issues that arise during design and integration phases.
• Custodian of the documentation of network design, planning and configurations to ensure the technical sustainability for the sector assigned.
• Work with network presales consultants to develop detailed and customized technical proposals for tech refresh, add-on, or variation orders, clearly outlining the benefits, features, and value of the proposed network solutions.
• Identify opportunities for continuous improvement and innovation such as automation to enhance network performance, reliability, and security.
• Foster effective communication and collaboration with internal and external stakeholders to ensure project alignment with business goals.

Requirements:

• CCNP certification is required, demonstrating a strong foundation in network design and implementation.
• CISSP and CCIE Enterprise Infrastructure certification are considered significant advantage, showcasing exceptional expertise in complex network environments.
• Proven experience as a Network Architect or in a similar role, leading successful network projects from inception to completion.
• Extensive knowledge of networking technologies, protocols, and infrastructure components.
• Good knowledge of system and security technologies, protocols, and infrastructure components
• Solid experience in vendor management, scope of work negotiation.
• Excellent leadership, communication, and problem-solving skills.
• Strong analytical and troubleshooting abilities, with a keen attention to detail.
• Ability to work independently and collaboratively in a fast-paced environment.

Work location: Jurong East

Responsibilities:

• Project deployment for customers' Enterprise IT Network Services.
• Work closely with Project Manager to fulfil project deliverables.
• Able to perform the role of Project Lead for projects.
• Documentation skills include creating and updating detailed solution design, installation and maintenance documents.
• Develop test cases and conduct proof of concept tests on new software and hardware prior to upgrade/deployment.
• Establish TAC cases with principal vendor in complex problem till resolved.

Requirements:

• Preferably with good knowledge and hands on experience in the following areas:

- Design, planning, integration, implementation and validation.
- System integration and implementation project lifecycle.
- Troubleshooting and problem identification.
- Support of applications and IT infrastructures.
- LAN/WAN/WLAN: Cisco/Alcatel router, Enterprise/DC switches, WLC.
- Network Security Solutions: Fortinet, Checkpoints, Cisco IPS/IDS, Cisco ASA, Cisco Firepower, Cisco ISE, Aruba Clearpass, Cisco ESA, Cisco WSA, Cisco SMA.
- Network Monitoring: SolarWinds, Alcatel Omni-Vista.
- Network Appliances based: Infoblox DNS/DHCP, F5 LTM/GTM, A10 LTM.

• Preferably with Cisco certification, Alcatel certification, F5 LTM & Network Security products.
• Experience with LAN, WAN, WLAN, Data and Security networking in implementation.
• Fast-paced environment
• Proven analytical and problem-solving abilities.
• Highly self-motivated and directed, with keen attention to detail.
• Experience working in a team-oriented, collaborative environment.
• Good communication and writing skills.
• Able to work flexible hours especially during after-office hour scheduled maintenance windows.
• Strong customer service orientation.

Work location: Jurong East.

Responsibilities:

• Must be able to apply effective project management methodologies and ensure appropriate action applies in corrective needs
• Responsible for the development of project plans, activities and schedule
• Strong in tracking project scope, requirements, timelines, milestones and deliverables.
• Responsible for project Profit & Loss
• Must be able to manage cross-functional teams in project deliveries
• Manage contract requirements, terms, change management, identify potential risks and devise contingency plans.
• Provide regular projects communications including status updates to customers, senior management, customers and stakeholders
• Established and maintain comprehensive project documentation
• Design appropriate training programs and workshops for project team
• Experience in managing deployment of IT infrastructure, such as systems & networks and cybersecurity solutions
• Experience in major IT infrastructure & cybersecurity system updates, upgrades, OS hardening and migrations.
• Constantly keep abreast of latest technology changes to maintain deployment and operational efficiency
• Good vendor management skills.
• Participate in tender project management and maintenance costing & quotation
• Competent and proficient understanding in IT Infrastructure Services, Cybersecurity Solutions, Cloud Computing and Systems Integration.

Requirements:

• Highly motivated and self-driven to complete assignment with the limited resources and tight schedule
• Good technical skills in engineering, computer, cybersecurity and IT systems, and preferably in communications technologies as well
• Good knowledge of Systems Engineering, Project Management and Systems Integration
• Good communication and writing skills
• At least 2 years’ experience in project management. Able to handle complex projects, technical challenges and different groups of users and external contractors
• Good to have PMP or CITPM or PRINCE2 certification with strong understanding of techniques and methods
• Strong familiarity with project management software E.g. MS Project
• Strong customer management in collaboration and understanding their requirements
• Strong vendor management in negotiation and collaboration
• Strong in people management
• Work location: Jurong East

-Monitor, coordinate and keep track of site progress with internals and externals to ensure all work is carried out according to specifications and schedule

-Ensure compliance with WSH Regulations

-Able to read construction drawings, skilled in reinforcement concreting works, tiling, plastering, and other related finishing work on site

-Supervise the related construction activities at the site

Job Requirements:

-Candidates must possess at least a Primary/Secondary/”O” Level, Higher Secondary/College, Professional Certificate/Nitec in any field

-At least 1 years of working experience in a related field

Job Descriptions:

· Assist Deputy General Manager to support in managing Admin Team

· General administration support, including but not limited to:

· Company BCA license renewal, new application

· Support audit including GGBS, ISO, BCA 24 RP-P-T personnel

· Respond to internal & external parties, including but not limited to relevant government agencies such as BCA

· Preparing payment voucher for suppliers and processing petty cash claim for staff

· PPE order and record update

· Support tender team for POA application

· Support team leaders on call

· Company internal and external events support like posting Christmas cards, ordering CNY hampers and mooncakes etc

· Reception of guests from local and abroad

· Taking meeting minutes

· Management of company stamp and director’s signature stamp

· liaise with regional and HQ office and submit reports upon request

· General Admin duties, including but not limited to handling incoming calls, email, mails, ordering stationeries and pantry supplies, arranging travel and booking of hotels

· Other duties as assigned by DGM

Job Requirements:

· Diploma / Degree, admin or HR related studies preferred

· At least 5 years of related working experience

· Willing to multi-task and have sense of urgency.

· Able to work well as a team and independently

· Good command of written & spoken English and Chinese Mandarin (in order to liaise with Chinese speaking associates)

· Proficient with Microsoft Office programmes including MS Excel, Power point & MS Words

· Good interpersonal and communications skills

· 5 days work week

· Appointment title will commensurate with experience and qualification

Job Descriptions:

Assist in foreigh workers management pertaining to:

• MOM work passes application, renewal and cancellation
• Month end payroll process
• Prepare HR letters, eg. employment contracts, increment, warning, etc.
• Course registration, renewal and arrangement
• Dormitory matter (check in/out)
• Maintain employee records
• Daily attendance report
• Other ad-hoc duties when assigned
• General admin duties, eg. handling email, phone call and incoming mail.

Requirement:

• At least 1 years experience
• Good communication & interpersonal skills

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

• General administrative task & support
• Handling accounts receivable & accounts payable
• Handling general Accounting Tasks
• Administering payroll & maintaining employee records
• Handle MOM matters including work pass application / renewal / cancellation
• Workers dormitory arrangement.
• Coordinate with training & Development.
• Administer leave / MC records.
• Monthly CPF submission.
• Prepare employment letter, confirmation letter, warning letter, etc.
• Support admin function for purchasing, report typing and invoicing.
• Licence renewal & preparation of documents for submission.
• Prossess good organization, communication and people's skills
• Any ad-hoc HR & admin duties assigned.

Job Description:

- Perform maintenance, repair, overhaul and servicing (Mechanical)

- Perform lubricant replacement, greasing and flushing for system (Hydraulic)

- Perform wiring replacing, re-routing of harnesses, cabling repair and system testing (Electrical)

- Machinery usage involved overhead crane, buffering machine, hydraulic press, drilling machine & STE etc.

- Working at height (climbing up and down of vehicles)

- Maintain 5S/ housekeeping (Include, sweeping, clearing, and throwing rubbish, washing of parts & vehicles)

Job Requirements:

- NITEC/Higher NITEC in Electrical/ Electronics/ Mechatronics/ Mechanical Engineering preferred

- Competent in use of hand tooling

- Good interpersonal skills, proactive and work well with others

- Preferably with valid Class 3 driving license

Job Description

• Assist Construction Manager in daily works.
• Assist Construction Manager to manage and control overall construction activities in all aspects to successfully meet the project specifications and schedules in accordance with the performance requirements and project objectives.
• Assist in evaluating vendors, suppliers, examiners, checkers, sub-contractors, direct supply labour force etc.
• Monitor constructability reviews.
• Select and implement construction procedures most appropriate to the project considering the site conditions and the modular approach.
• Manage the mobilization schedule regarding staff, labour and equipment for the project.
• Oversee and control all construction/fabrication at yards (if applicable), off-site, and on-site.
• Develop the Construction Organization Plan and HSE Program and implement, maintain, track, evaluate, close any post-mortem plans throughout overall project period.
• Organize the construction works among construction team, partners, contractors and external parties, stakeholders.
• Arrange engineers and site supervisors to inspect the construction activities of contractors.
• Coordinate between contractors/fabricators at yard.
• Develop the general construction schedule, and prepare the monthly and weekly schedule, and monitor the implementation of these schedules.
• Facilitate planner to exercise his/her planning/ scheduling works.
• Monitor the schedule to facilitate completion on time.
• Site material control and field engineering.
• Take part in site construction coordination meeting and make sure to any issues.
• Take part in cost control, review the variation claim and monthly progress payment application.
• Facilitate any claim, SOP, arbitration, mediation or any adjudication when requested by management.
• Any tasks or jobs assigned by Management.

Job Requirements

• Diploma, Degree in Engineering (Civil, Mechanical preference) or equivalent.
• At least 10 years of experience in project management, construction, design, testing and commissioning of thermal process plant systems e.g. boiler, furnace, heat-exchangers, flue gas treatment system.
• Familiar with heavy lifting, bulky equipment, items installation and logistic planning. Experience in water and wastewater will be added advantage.
• Well versed in contract management, Quality Assurance and HSE matters. Experience in Process Plant engineering interfacing and coordination will be added advantage.
• Strong leadership and communication skills; meticulous; self-driven, independent.
• Willing to work in Tuas.
• This is a 2 years contract role.

Job Description

- Tabulate quantities, estimate cost and request for quotation

- General Contract administration and measurement works

- Liaise with subcontractor and clients

- Ensure timely completion of an assign tender

- Updating contract documents, drawings, and correspondences

- Other quantity surveyor duties as assigned

- Better to have final account experience

Job Requirements

- Minimum Diploma in Quantity Surveying or equivalent

- Minimum 2-year experience in residential housing preferred and final account work

- Proficient in MS Office and other Measurement Software

- Shows independency ability to multi-task, prioritize, and organise tasks

- Ability to liaise with consultants, subcons and client

- Familiar with VOs, Als, EOT and final account work

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

Assemble or fabricate mechanical parts, pieces or products using a variety of tools and equipment according to required specifications in a manufacturing organization

Organizes, coordinates, and supervises employees and activities within the fabrication department to ensure an effective and efficient fabrication operation that meets safety, quality, and production standards. Reports to Plant Manager.

Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, weld symbols, bills of materials, and other written instructions or procedures to accurately create equipment and products

Utilize handheld tools such as a hand held screw gun, drill gun, and grinders

Operate calipers, weld gauges, tape measures, and other welding hand tool

Maintain weld machines using preventative maintenance methods Continually evaluate weld machine performance and technology to improve cycle times

Maintain inventory of manufacturing product and welding consumables

Create specific weldment set-ups and fixturing to meet geometric requirements

Perform quality work checks to ensure the product meets quality standards

Identify product defects and complete appropriate documentation when defects are identified

Rework and/or repair welded parts and products according to engineering specification changes

Perform all work in accordance with quality standards and established safety procedures

Prioritize work flow through effective communication with management staff

Maintain a clean and safe work area

Engineering Project Managers are pivotal in steering complex engineering projects from conception to completion, ensuring that technical solutions are delivered on time, within budget, and to the required quality standards

Defining project scope, goals, and deliverables in collaboration with senior management and stakeholders

Developing detailed project plans that outline specific engineering tasks, timelines, and resource allocations

Coordinating cross-functional teams of engineers, designers, and technical staff to ensure project milestones are met

Managing project budgets, including cost estimation, budget tracking, and financial reporting

Ensuring compliance with industry standards, regulatory requirements, and company policies

Identifying, assessing, and mitigating project risks and issues throughout the project lifecycle

Communicating effectively with stakeholders to provide project updates, gather feedback, and make informed decisions

Conducting post-project evaluation to identify successful elements and areas for improvement for future projects

Continuously updating project documentation and maintaining accurate records for all project-related information

Leading and motivating project teams, providing guidance and support to foster a collaborative work environment

Leading and motivating project teams; assigning tasks and deadlines

Managing project budgets and resources, including adjustments as necessary

Identifying, assessing, and minimizing project risks throughout the project lifecycle

Directing the allocation of resources across various projects for optimal efficiency

Job description

• Prepare drawings for the production line & provide design information to customers upon their requests.
• Follow up on customers’ requests & requirements. Provide on-site & off-site service to customers.
• To pick up any orders for fabrication or modification from customers.
• To abide by all contractual assignments and rules and regulations in any OEM maker contract.
• Require traveling or attached to overseas assignment and will be subjected to overseas allowance.
• To follow all duties and responsibilities assigned by the management or superiors.

Requirements

• Degree / Diploma in Mechanical Engineering or equivalent
• Proficient in CAD software, preferably in AutoCad & SolidWorks
• Preferably with knowledge in Jigs & Fixtures design
• Preferably with experience in the Semiconductor industry
• 3-5 years of relevant experience

Key Responsibilities

Administrative Operations:

• Manage office operations, vendor coordination, and procurement processes.
• Handle vendor management systems such as Ariba and GeBIZ, ensuring efficient and compliant operations.
• Develop and implement policies and procedures for improved operational efficiency.

HR Operations:

• Oversee HR functions including recruitment, onboarding, payroll, employee relations, and compliance with Singapore labor laws.
• Create and manage employee-related documentation, including employment contracts, performance appraisals, and termination letters, ensuring compliance with local laws.
• Foster a positive work environment by leading and mentoring the HR and administrative teams.

Finance & Compliance:

• Prepare and manage income tax and GST documentation in compliance with Singapore’s regulatory framework.
• Ensure accurate and timely submission of statutory documents such as CPF contributions, IRAS filings, and MOM-related requirements.
• Provide support in financial audits and maintain accurate records for compliance.

Vendor Management:

• Manage vendor relationships through platforms like Ariba and GeBIZ.
• Ensure timely procurement, payment processing, and compliance with procurement policies.

Requirements

• Education: Master’s Degree in Management or a related discipline.
• Experience: 4–5 years of relevant experience in the construction sector in Singapore.
• Knowledge:Strong understanding of Singapore company laws, employment laws, and financial regulations.
  Experience in vendor management systems like Ariba and GeBIZ.
  Familiarity with income tax and GST documentation in Singapore.
  
• Skills:Excellent communication, organizational, and leadership skills.
  Proficiency in Microsoft Office Suite and HRIS systems.
  Ability to handle multiple priorities in a dynamic environment.
  

We are locally own company since Year 2003. We are located at Tuas View Place. Currently, we are operating 2 shifts with 5.5 working days per week with OT. We mainly using Makino Wire Cut Machines and Mazak CNC Lathe.

We have vacancy for EDM Wirecut programmer cum machinist. Prefer with cadcam knowledge and experience.

We specialist in manufacturing of aerospace parts , oil & gas , stamping, semiconductor parts.

- Must have knowledge of using measuring equipment, Vernier Caliper, Micrometer, Height Gauge

- Must be able to understand Technical Drawing

- Must be able to liaise with Customers

- Must quality check all finished parts before sending to customers

- Generate QC Reports to customers

- Must be able to use Microsoft Excel / Words / Email Anyone with the equivalent knowledge will be consider Salary will commence base on experience.

Develop a marketing strategy in accordance with the overall company goals and vision

· Understanding Company Products and doing Market Research to identify specific target groups and implement niche marketing strategies

· Grow the social media community

· Implement and manage a multi-channel marketing strategy

· Grow online marketing partners (digital publications or influencers)

· Copywriting and copy editing - Both internal and external marketing materials

· Create and execute highly engaging, Skills and experience in creative content writing

· Cross-platform social media & marketing campaigns (design, call to action and content)

· Manage content - copywriting & design. Handle content schedule and posting of content

· Experience in attaining PR coverage both online and offline

· Simple research work

· Assisting with ad hoc duties as required

Requirements:

· Social media analytics and ads experience is preferred. Social media management and community managers preferred.

· Exceptional communication skills, both written and verbal. Strong written English is a MUST

· Ability to multitask and meet tight deadlines

• Posting of recruitment advertisements
• Engagement with both internal and external stakeholders such as employees and vendors, etc
• Manage office sundry purchases
• Payroll administration
• Assists in employment contract renewals
• Coordinate medical arrangement for foreign employees (medical check-ups for work pass, and vaccination)
• Ensure complete, up-to-date, accurate and accessible records are kept for all employees.
• Assists in the co-ordination of social and recreational activities to promote the general welfare of all employees
• Performs HR data entry relating to employee's information, training records, etc.
• Manage and route phone calls appropriately
• Assists in work pass applications and other immigration related work.
• Prepare and submit government bodies and statutory board related surveys.