Key Job responsibilities :

• Design, develop and test IOT based electronic products and solutions.

Attributes:

• Keen interest in new product development and product improvement in IoT, electronics and sensors etc fields.
• Provide support to plant electronics and project deployment.
• Must be a team-player. He is expected to contribute and collaborate with other members within and across teams to meet the teamobjectives.
• Able to work independently and take initiatives when needed.
• Well-mannered, have positive attitude and willingness to take up new challenges.

Technical Experience

• Experience in Embedded Systems firmware/software development.
• Experience in C/C++ programming.
• Good knowledge of IoT sensors, PCB design, hardware design & troubleshooting.
• Hands-on experience with interfacing various on-chip and off-chip peripherals like LCD displays, keypads, UART, SPI, I2C, ADC, timers, interrupts, GPIO etc.
• Experience in prototyping boards e.g. Arduino, Raspberry Pi etc.
• Ability to perform soldering and reworking of SMD packages
• 3D CAD design of product

Job Description

• Perform onsite installation, repair, commissioning of mechanical/electrical equipment.
• Perform routine inspections and preventive maintenance.
• Hands on testing and troubleshooting of mechanical/electrical system.
• Carry out work material requisition, project coordination, and documentation.
• Ensure that workshop equipment, such as tools, shelves and racks are in good condition.

Requirements:

• With valid Singapore Class 3 Driving Licence
• Min 5 years of experience in mechanical/electrical
• Poly Diploma or higher Nitec in Mechanical/Electrical Engineering
• Computer skill

Produce and analyze design with solar Layout PVsyst, voltage drop, SLD.

Produce Engineering proposal and preliminary design layout.

Submit structure drawing for QP structural assessment, SCDF submission.

Conduct internal/third-party testing & Conditioning.

Preparation of material submission for approval.

Issue shop-drawings, layout, SLD, Structure details, etc.

Reporting & Monitor progress status.

Provide support to site team for timely effective resolution of queries.

Liaise with client/Project team on the drawing amendment.

Preparation of As Built drawings, reports on project completion.

Candidate should have hands on experience in Electrical - 5Yrs, Drafter -3yrs and in Solar 2.5yrs.

Job Descriptions

1. Verifying the implementation and operation of the quality assurance and control systems, by planning and conducting internal quality audits and inspection activities on head/corporate office and site offices.

2. Verifying that the company quality policy, is fully understood, implemented, operated and maintained.

3. Ensure implementation and continuous improvement in overall quality systems.

4. Ensure that all contractual/company and local authority requirements for Quality, Health Safety & Environment (HSE) requirements are complied with.

5. Review, update and control, the distribution of the Quality Management Procedure, Quality Manual and related procedures for Infrastructure, MEP, Civil and other subcontractors and divisions

6. Generate project specific quality plans for Civil and Infrastructure projects.

7. Ensuring adequate training / awareness of company personnel for quality systems.

8. Prepare where necessary, statistical data which will show quality trends for management review meeting.

9. Ensure Customer Satisfactions are monitored / measured and improvement / corrective actions taken for weak areas

10. Ensure that all non-conformance issues are promptly investigated, corrective and preventive actions are proposed / implemented and are quickly closed out.

11. Ensure that the contractual quality requirements of a project are fully communicated to all key personnel, so that their roles in fulfilling these requirements are fully understood.

12. Ensure that all subcontractors' quality systems and plans are acceptable to the company as applicable to the "Project Contract".

13. Ensure that Subcontractor's / Supplier's quality systems are implemented and effective.

14. Ensure that the calibration of all inspection, measurement and test equipment is conducted according to the defined schedule.

15. Conduct reviews of the approved suppliers and subcontractor's list.

16. Liaise with the clients quality representative to ensure that all potential and actual quality issues are fully resolved.

Job Specifications

1. Degree in Engineering or related disciplines

2. Proven experience as QAQC manager

3. Familiarity with quality and health and safety standards

4. Excellent organizational and time-management skills

5. Minimum 5 years of relevant experience.

Company Description:

A well-established company with more than 20 years in the global fastening industry is seeking forward-looking programmers to join to become the pioneers of B2B eCommerce digital products that will disrupt the market. Already a market leader in its own niche area in this billion-dollar manufacturing market, the team will take a point position in leading the company to its next chapter.

The digital products produced by the eCommerce team will be the new frontier for the Company’s business to serve both existing and new customers. We are looking for highly skilled computer programmers who are comfortable with both front and back-end programming. You will be responsible for developing and designing front-end web architecture, ensuring the responsiveness of applications, and working alongside graphic designers for web design features, among other duties.

You will be required to follow through with all our projects from conception to final deployment, with good organizational and communication skills and most importantly attention to detail.

Job Scope:

1. Design and develop B2B online procurement modules and marketplace for international sellers and buyers.
2. Programming and maintenance of website with standard market practice.
3. Configuration and working with Windows Azure App Services and SQL Databases.
4. Debugging ASP.NET C# web applications.
5. Understand business logics and convert to system functions as required.
6. Understand various authentication system and create/maintain the system.
7. Review and write technical documentations.
8. Conduct application test cases and create test scenarios on different platforms.
9. Work closely with stakeholders to embed the changes to the existing websites.
10. Provide on-site technical support if any IT related issues.

Requirements:

1. Degree/Diploma in IT, Computer Science, or related disciplines
2. Proven experience as a Full Stack Developer or similar role
3. Experience developing web and mobile applications
4. Knowledge of multiple front-end languages and libraries: HTML/CSS, JavaScript, XML, jQuery, Bootstrap 5.0
5. Knowledge of C#, ASP.NET, JavaScript frameworks
6. Familiarity with databases: MS-SQL, MySQL and UI/UX design
7. Understanding Agile Methodologies like Scrum, Kanban etc.
8. Team player with good communication skills
9. Demonstrates high attention to detail, clear communication & problem-solving skills
10. Experience in .NET Framework, EF will be preferred
11. Experience in CMS and Dashboard development is an advantage
12. Ability to learn and adapt to dynamic changing environment and technologies
13. With minimum 3-years of proven development experience in custom-built ecommerce platform (B2B or B2C) is preferred.
14. Experience using project management tools like Jira, Asana, Trello etc., is a plus
15. Self-initiated and able to work independently on the project modules.

We're a specialist company in various Vacuum Technology applications, as well as a keen innovator in Waste Management technology for sustainable environment.

· 5 Day work week

· Woodlands / Marsiling Area

· Industrial Vacuum Equipment and System Applications, Waste Management Automation Systems.

· Handphone Allowance.

Job Scope:

1. Develop and collaborate drawings using AutoCAD.
2. To maintain, update and manage a design drawing library for all systems.
3. To provide full support to the sales & operations teams in the areas of engineering design, application, drawings updating.
4. Read and understand engineering specification sheets.
5. Liaise and coordinate with consultants and contractors.
6. Draw 2D & 3D drawings based on customer sketches or physical samples

Requirements:

1. Cooperative & possess good work attitude.
2. Diploma and/or Degree in Mechanical Engineering or equivalent
3. Fresh graduate is welcomed
4. Proficient in AutoCAD
5. Proficient in BIM Modelling (Revit) will be an added advantage.
6. Experience in waste management or vacuum systems will be an added advantage.

Responsibilities

• Responsible for the day-to-day IT operation, including installation, configuration, maintenance, and management of hardware and software applications, computer hardware, data network equipment, copiers, phone PBX system, CCTV system, security alarm.
• Responsible for assessing systems, diagnosing and resolving technical problems that users encounter with hardware, software, or networks.
• Ensuring the reliability, and integrity of the network infrastructure.
• Network Management, setting up and maintaining network infrastructure such as routers, switches, firewalls, and wireless access points to ensure connectivity and security.
• Implement cybersecurity measures to protect against unauthorized access, data breaches, malware, and other cyber threats.
• ERP Administration, maintenance, and optimization of the system. Understanding the company business process flow and collaborating with different departments to enhance the ERP system as needed. Integrating with Intranet system to ensure smooth data flow.
• Analysing and understanding company process needs, such as hardware and software specifications, provides technical support to related departments and suggesting and implementing upgrades.
• Analysing databases in an application area how to optimize applications by integrating performing software or upgrades and integrating new technologies.
• Gathering of requirements, analysis, design and development of integration solutions and APIs, creating workflows and connectors to enhance system integration.

Requirements

• At least Diploma in IT, Computer Science or related studies.
• Minimum 3 years of relevant working experience of ICT support and managing Microsoft servers’ infrastructure and Hyper V.
• Professional certifications (administration/support) from Microsoft 365, Business Central Dynamic 365, Power BI, SAP, SQL or equivalent will be a plus.
• Understanding of networking protocols and security technologies.
• Project management experience will be advantageous.
• Collaboration with different departments.

Scope

The Creative Designer is expected to work on advertising and branding campaigns using a range of mediums such as online, films, digital, animation and prints. Your core work shall be on products, packaging, kits for teams, events, or location designs. You are expected to be a systematic design thinker and have seen projects from concept to completion.

Your goal will be to create and direct outstanding creative work that will help the Company achieve its desired objectives. You can expect to work in a small in-house team environment and shall play the lead role from brief to orchestrating and eventually executing all creative projects in a timely manner.

There will be comprehensive training on company SOP and department processes.

You will be working in a team of 4 including the Marketing Manager.

Attractive staff benefits and entitlements.

If you think you are up for this offer, feel free to apply your interest and we hope to meet you soon!

Job Description

• Developing concepts for all creative projects and campaigns
• Pitching your concepts to internal teams and external distribution channels (clients)
• Keeping clients abreast of progress and meeting strict timelines
• storyboarding or translating ideas to creative team or vendors.
• Leading multiple projects from conception to completion in accordance to agreed direction and timeline.
• Evaluating and altering (if necessary) project contents before completion
• Ensuring all the Company’s visuals are consistent with the overall brand.
• Steering or writing scripts
• Oversee (if outsourced) or carry out photo or video shoots or any creative projects.
• Evaluate and select external vendors.

Tasks

• Content creation
• Storyboarding
• Production
• Copywriting
• Video Production
• Photography
• Animation
• 3D Rendering
• 3D Graphics Design
• Assist with Marketing
• Assist with Events

Requirements & Essential Skills

• Candidate must possess at least a Diploma in the creative field.
• Required language(s): English, Mandarin is a plus as we need to coordinate with our Taiwan office.
• Mastery of Illustrator, InDesign, Photoshop, Adobe Premier Pro, PowerPoint, 3D software and Canva.
• Deep understanding of typography, design elements and best practices across print and digital
• Ability to understand, contribute and author creative strategy.
• Organised with excellent time management and attention to detail.
• Ability to work under pressure and datelines.
• Flexible, highly motivated, and approachable with excellent communication skills
• Ability to work effectively with external vendors and speciality resources.

Working Hours

Monday to Friday, 9.00am to 6.00pm

Probation Period

Max 6 months

Salary Range

SGD2,500 to SGD3,600

US Company

Located at Woodlands

Salary: $6000-$8500

Mon to Fri 8.30am to 5.30pm

Job Description

• Work with Customers and counterparts on new bellow assembly design as well as their applications.
• Study and analyze customer design requirement, specifications, and other data to evaluate the feasibility, cost, and tooling/equipment requirements
• Review and approve design of new products using 3D CAD modelling
• Review and approve the manufacturing processes of new product, shop floor router, Work Instructions and standard operating procedures
• To check the drawings accuracy and release for prototype development and mass production.
• Ensure on time completion of NPI activities, to co-ordinate and follow through FAI build to identify potential issues and take preventive actions accordingly.
• Review and approve Bill of Material and routing for new part numbers in ERP system.
• Perform product validation according to the product design specification and customer requirements.
• Work with vendors to fabricate and test functional prototypes of new products, component changes and design improvements.
• Liaise with customer for Engineering Change, raises ECN and co-ordinate with internal personnel to ensure smooth implementation.
• Lead and ensure CIP/Kaizen projects meet cost savings targets,reduce cycle time ,improve yield and are implemented on time
• Participate in cost reduction activities by evaluating design simplification, alternate materials and change of supplier.
• Work with Facility team for implementation of Automation project

Requirements

• Bachelor’s degree in Mechanical Engineering or equivalent required
• Proficiency in Solidworks and AutoCad.
• Familiar with welding technology, material science, machining and stamping parts fabrication processes, with exposure in FEA

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies with a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets for more information, visit www.globalfoundries.com

Introduction
In this role you will assist engineers in device development. Responsible to optimize and develop device and processes to lead to device characterization.

Your Job

• Handling high precision equipment to perform sophisticated semiconductor device characterization involving MOSFET, BJT, Sensor & non-volatile memory devices.
• Coding for test automation
• Development of testing capability
• Management of testing tools, including spares, calibration, and repairs

Required Qualifications:

• Diploma in Electrical Engineering or equivalent
• Field of specialization: Microelectronics (preferred)
• 3 yrs of relevant experience in similar role

Other Essential Attributes

• Familiar with Microsoft Excel (preferably including macros) and Word
• Conscientious, accurate and organized
• Good communication and interpersonal skills

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

To ensure that we maintain a safe and healthy workplace for our GlobalFoundries employees, please note that offered candidates who have applied for jobs in Singapore will have to be fully vaccinated prior to their targeted start date. For new hires, the appointment is contingent upon the provision of a copy of their COVID-19 vaccination document, subject to any written request for medical or religious accommodation.

Key Responsibilities:

• Service Delivery Management: Oversee daily service operations and ensure timely and effective service delivery. Develop and implement service standards and procedures. Monitor and evaluate service performance metrics. Ensure compliance with company policies and industry regulations.
  
• Team Leadership and Development: Lead, mentor, and develop the service team to enhance their skills and performance. Conduct regular performance reviews and provide feedback and coaching.
  Facilitate training programs to improve service delivery and customer interaction skills.
  
• Customer Relationship Management: Handle escalated customer issues and complaints to ensure resolution and satisfaction. Maintain strong relationships with key clients and stakeholders. Gather and analyze customer feedback to identify areas for improvement.
  
• Operational Efficiency: Identify and implement process improvements to enhance service efficiency and effectiveness. Manage the allocation of resources to meet service demand and optimize productivity.
  Monitor service costs and develop strategies to reduce expenses without compromising quality.
  
• Reporting and Documentation: Prepare and present regular reports on service performance and key metrics.
  Maintain accurate records of service activities, customer interactions, and team performance.
  Ensure proper documentation of processes, procedures, and compliance requirements.
  
• Collaboration and Communication: Collaborate with other departments to ensure seamless service integration and support. Communicate effectively with team members, customers, and stakeholders.
  Participate in cross-functional meetings and projects as needed.
  

Qualifications:

• Bachelor’s degree in Business Administration, Management, or a related field.
• Proven experience as a Service Manager or in a similar role.
• Strong leadership and team management skills.
• Excellent communication and interpersonal skills.
• Ability to handle stressful situations and resolve conflicts effectively.
• Proficiency in using service management software and tools.
• Strong analytical and problem-solving abilities.
• Customer-focused mindset with a commitment to delivering high-quality service.

Preferred Qualifications:

• Master’s degree in Business Administration or a related field.
• Industry-specific certifications (e.g., ITIL, Six Sigma).
• Experience in [specific industry or field relevant to the company].

Working Conditions:

• Full-time position with occasional need for overtime or weekend work.
• Office environment with regular interaction with customers and team members.
• Some travel may be required to meet with clients or attend industry events.

Data entry (sales figures, property listings etc.)

General office management such as ordering stationary

Organising travel and accommodation for staff and customers

Arranging both internal and external events

Possibly maintaining the company social media accounts and chats

Providing administration support and Customer handling

Tax and Payroll

Administration and Accounting

Human Resource

Team Player

Budgeting and Performance Manangement , Store Management

• Preparation and assisting the Senior Mechanical Design Engineer in the mechanical design calculations, drawings, specifications, and tender documents for the design projects
• Participation in design progress and design coordination meetings
• Previous HVAC engineering experience and a subject matter expert in the discipline of HVAC engineering discipline are required
• Up-to-date relevant knowledge of the HVAC engineering and industry best practice, appropriate to the relevant discipline
• HVAC design contents as assigned
• Support the senior project team in the overall implementation of the HVAC engineering strategy and framework for the designated project
• Ensure all systems, design information, procedures, and quality systems are effectively communicated to subcontractor
• A degree in a relevant engineering discipline and a relevant professional qualification, such as MICE or MIStructE
• Review competitor's equipment and pricing references and provide valued engineering competitive Daikin product
• Develop Bid Documents including project specifications and detailed engineering drawings utilizing AutoCAD
• To assist and support project team members in completing the project.
• To determine budget, project schedules, and scope of work and deploy appropriate staff.
• To study and assess drawings, plans, specifications, and other documents relating to the construction project.
• To direct, lead and support other engineering skilled personnel in managing and executing multiple tasks and projects.
• To review, assess and evaluate the execution of the project on a regular basis.
• To troubleshoot and resolve complex issues arising in a project.
• To carry out site visits throughout the project in order to record information on the progress of the project against the agreed programme.
• To verify material requisition and taking-off quantities/site measurement.
• To attend to site tests and inspections.
• To ensure quality standards and all health & safety requirements are adhered to.
• To ensure the completion of the project in a timely manner and within the budgetary limits.
• To prepare progress payment claims and variation orders.
• To prepare subcontractors award schedule.
• To develop project reports on a timely basis.
• To maintain, manage, and document all project reports and statements.
• To perform other related duties, as assigned Job Requirements.

Job Description:

Under the direct supervision of the Tender Team, the Quantity Surveyor plans, controls and monitors the tender drawing, documents and BQs for all tender projects, in both tender stage and post tender stage. The Quantity Surveyor also assist to verify the site progress, claim and monitor the material balance sheet in execution stage.

Requirements:

• Candidate must possess at least a Diploma/Advanced/higher/Graduate Diploma in Quantity Survey or Mechanical/Electrical Engineering or equivalent.
• Certain knowledge & experience in M&E system requirement.
• Able to work under pressure and meet tight deadline.
• Able to work independent with min supervision.
• Good knowledge and skill set in Microsoft Office.
• Quick learner and willing to explore to new skill sets/technologies.
• To keep track all tender documents, drawing and corrigendum base on the document control process.
• To verify the tender drawing/detail and prepare the tender enquiry.
• To assist Superior to call for quotations, selection of qualified subcontractors/vendors and distribute the relevant tender documents.
• Perform quantity take-off for tender projects based on the set time line.
• Assist with tender evaluation and prepare of tender documents for submission.
• Ensure all documentary evidences and contemporary records are properly documented, filed and complied for substantiation purposes.
• Able to read M&E drawings.
• Site verifications of variations and taking records for submissions of claims.
• to assist project manager/designated staff to evaluate and certify completed work.
• Assist in verifying sub-contractor’s claims
• prepare and assist in monitoring the progress of claims submission and payment (this shall be under contract manager’ duty)Monitor all order in execution and report on the balance amount.

Roles & Responsibilities

• Prepare drawings and detailed design documents for preliminary, construction and as-built status by using BIM Modeling, AutoCAD, Revit.
• Assist Project Engineers and Project Managers at all levels.
• Remain constantly updated with the drafting technology to maintain technical competency.
• Plan all drawing request to meet the submission deadline.
• On time delivery of all drawings, correct and accurate drawings and maintain soft copy of achieve drawings.
• Draft plans and detailed drawings for installations, and construction projects working from sketches or notes.
• Finish and duplicate drawings and documentation packages, according to required mediums and specifications for reproduction using blueprinting, photography, or other duplicating methods.

Qualification:

• Minimum Diploma / Degree.
• Experience in handle multiple projects simultaneously.
• Effective verbal and written communication skills.
• Exceptional organizational abilities with task prioritization, multi-tasking and time management techniques.
• Effectively manage time between all responsibilities.
• Ability to attend and conduct presentations.
• Proficient in AutoCAD, microsoft office , etc.

• Preparation and assisting the Senior Mechanical Design Engineer in the mechanical design calculations, drawings, specifications, and tender documents for the design projects
• Participation in design progress and design coordination meetings
• Previous HVAC engineering experience and a subject matter expert in the discipline of HVAC engineering discipline are required
• Up-to-date relevant knowledge of the HVAC engineering and industry best practice, appropriate to the relevant discipline
• HVAC design contents as assigned
• Support the senior project team in the overall implementation of the HVAC engineering strategy and framework for the designated project
• Ensure all systems, design information, procedures, and quality systems are effectively communicated to subcontractor
• A degree in a relevant engineering discipline and a relevant professional qualification, such as MICE or MIStructE
• Review competitor's equipment and pricing references and provide valued engineering competitive Daikin product
• Develop Bid Documents including project specifications and detailed engineering drawings utilizing AutoCAD
• To assist and support project team members in completing the project.
• To determine budget, project schedules, and scope of work and deploy appropriate staff.
• To study and assess drawings, plans, specifications, and other documents relating to the construction project.
• To direct, lead and support other engineering skilled personnel in managing and executing multiple tasks and projects.
• To review, assess and evaluate the execution of the project on a regular basis.
• To troubleshoot and resolve complex issues arising in a project.
• To carry out site visits throughout the project in order to record information on the progress of the project against the agreed programme.
• To verify material requisition and taking-off quantities/site measurement.
• To attend to site tests and inspections.
• To ensure quality standards and all health & safety requirements are adhered to.
• To ensure the completion of the project in a timely manner and within the budgetary limits.
• To prepare progress payment claims and variation orders.
• To prepare subcontractors award schedule.
• To develop project reports on a timely basis.
• To maintain, manage, and document all project reports and statements.
• To perform other related duties, as assigned Job Requirements.

US Company

Located at Woodlands

Salary: $6000-$8500

Mon to Fri 8.30am to 5.30pm

Job Description

• Work with Customers and counterparts on new bellow assembly design as well as their applications.
• Study and analyze customer design requirement, specifications, and other data to evaluate the feasibility, cost, and tooling/equipment requirements
• Review and approve design of new products using 3D CAD modelling
• Review and approve the manufacturing processes of new product, shop floor router, Work Instructions and standard operating procedures
• To check the drawings accuracy and release for prototype development and mass production.
• Ensure on time completion of NPI activities, to co-ordinate and follow through FAI build to identify potential issues and take preventive actions accordingly.
• Review and approve Bill of Material and routing for new part numbers in ERP system.
• Perform product validation according to the product design specification and customer requirements.
• Work with vendors to fabricate and test functional prototypes of new products, component changes and design improvements.
• Liaise with customer for Engineering Change, raises ECN and co-ordinate with internal personnel to ensure smooth implementation.
• Lead and ensure CIP/Kaizen projects meet cost savings targets,reduce cycle time ,improve yield and are implemented on time
• Participate in cost reduction activities by evaluating design simplification, alternate materials and change of supplier.
• Work with Facility team for implementation of Automation project

Requirements

• Bachelor’s degree in Mechanical Engineering or equivalent required
• Proficiency in Solidworks and AutoCad.
• Familiar with welding technology, material science, machining and stamping parts fabrication processes, with exposure in FEA

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Assist in purchasing of all project work materials identified in the tender.
• Assist in evaluating and selecting competent suppliers and sub-contractors for the construction works.
• Checks the allocation of manpower and productivity. Prepares comparison sheets for quotations from suppliers and subcontractors.
• Competent in preparing Bills of Quantities.
• Monitors and records site progress and keep records of day works.
• Check and evaluate the progress claims submitted by the sub-contractors in liaison with Project Manager / designated staff on the work done in terms of quantities and quality.
• Follow up payments from main contractor/consultant/client.
• Provides advice on contractual claims, VO or other contractual matters.
• Competent in performing all tender activities necessary for the procurement of new projects.
• Competent in working independently as well as with a team.
  

Job Requirements:

• Degree/Diploma in Construction Management or Quantity Surveying
• Minimum 2 years relevant experience
• Computer literate, Microsoft office
• With construction background
• Able to work independently and in teams
  

Job Description:

• Quantity take off and cost estimation based on technical details, drawings, and specifications
• Sourcing out of quotations from suppliers and subcontractors
• Evaluation of supplier and subcontractor's quotations for recommendation of competitive prices
• Assist in the preparation and submission of tender and contract documents
• Preparation and submission of progress payment claims and variation orders
• Attendance of site meeting and liaise with the cost consultant
• Measure and value the work done on site
• Evaluation and certification of supplier and subcontractor's claims
• Finalization and closing out of project accounts
• Estimation of quantities, evaluation and cost comparison of sub-contractors quotations
• Reply to sales enquiry
• Prepare and follow up sales quotation
• Prepare project subcontract
• Prepare bills of quantities and other documentation
• To approve sub-contractors’ claims for job done as per site status
• To establish progress claims as per site status and obtain client agreement for billing

Job Requirement:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Quantity Surveying
• At least 5 Year(s) of working experience in Singapore related field.
• Preferably Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Looking for meticulous, committed, proactive and creative thinker candidate.
• Possess sense of urgency.
• Good communication and presentation skill.
• Able to work independantly with minimun supervison.
• workplace: Woodlands

Job Description & Requirements

• Lead and oversees project execution, monitor site progress, and ensure on-time completion of the project
• Project planning and project management
• Liaise closely with subcontractors, architects, consultants and authorities; set guidelines and provide expertise and supervision to the team.
• Project management, coordination, implementation, execution, control and completion of specific projects.
• Oversee the planning, analysis, recommendations in support of project construction planning, implementation and monitoring work schedules in accordance to the master and detailed work programme.
• Liaise with consultants for technical issues and coordinate with subcontractors on the site activities .
• Assist in developing and implementing corporate construction policies that support project construction.
• Managing interfaces with other contractors working on the project.
• Provide guidance to engineers in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time
• Manage contractors with a focus on quality, compliance with engineering drawings; applicable code and standards, and construction schedule and cost.
• Prepare report and method statement.
• Monitor ongoing site activities.

Job Requirements:

• Exposure into Interior and Building Construction Project is an advantage
• Be dynamic, self-motivated, proactive, and results-oriented with a proven track record in the construction industry.
• Extensive experience in construction industry and project management.

US Company

Located at Woodlands

Salary: $6000-$8500

Mon to Fri 8.30am to 5.30pm

Job Description

• Work with Customers and counterparts on new bellow assembly design as well as their applications.
• Study and analyze customer design requirement, specifications, and other data to evaluate the feasibility, cost, and tooling/equipment requirements
• Review and approve design of new products using 3D CAD modelling
• Review and approve the manufacturing processes of new product, shop floor router, Work Instructions and standard operating procedures
• To check the drawings accuracy and release for prototype development and mass production.
• Ensure on time completion of NPI activities, to co-ordinate and follow through FAI build to identify potential issues and take preventive actions accordingly.
• Review and approve Bill of Material and routing for new part numbers in ERP system.
• Perform product validation according to the product design specification and customer requirements.
• Work with vendors to fabricate and test functional prototypes of new products, component changes and design improvements.
• Liaise with customer for Engineering Change, raises ECN and co-ordinate with internal personnel to ensure smooth implementation.
• Lead and ensure CIP/Kaizen projects meet cost savings targets,reduce cycle time ,improve yield and are implemented on time
• Participate in cost reduction activities by evaluating design simplification, alternate materials and change of supplier.
• Work with Facility team for implementation of Automation project

Requirements

• Bachelor’s degree in Mechanical Engineering or equivalent required
• Proficiency in Solidworks and AutoCad.
• Familiar with welding technology, material science, machining and stamping parts fabrication processes, with exposure in FEA

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Description

1. Monitor and control projects progress.

2. Attend project safety meeting and site co-ordination meeting.

3. Arrangement of work according to Builder's work program.

4. Monitor daily work progress and feedback.

5. Carry out inspection and testing.

6. Ensure project handover on time.

7. Other ad-hoc duties as assigned.

Job Requirements

1. Diploma in Electrical Engineering.

2. Knowledge of electrical works.

3. Able to work under tight schedule.

4. Team player.

US Company

Located at Woodlands

Salary: $6000-$7800

Mon to Fri 8.30am to 5.30pm

Job Description

• Work with Customers and counterparts on new bellow assembly design as well as their applications.
• Study and analyze customer design requirement, specifications, and other data to evaluate the feasibility, cost, and tooling/equipment requirements
• Review and approve design of new products using 3D CAD modelling
• Review and approve the manufacturing processes of new product, shop floor router, Work Instructions and standard operating procedures
• To check the drawings accuracy and release for prototype development and mass production.
• Ensure on time completion of NPI activities, to co-ordinate and follow through FAI build to identify potential issues and take preventive actions accordingly.
• Review and approve Bill of Material and routing for new part numbers in ERP system.
• Perform product validation according to the product design specification and customer requirements.
• Work with vendors to fabricate and test functional prototypes of new products, component changes and design improvements.
• Liaise with customer for Engineering Change, raises ECN and co-ordinate with internal personnel to ensure smooth implementation.
• Lead and ensure CIP/Kaizen projects meet cost savings targets,reduce cycle time ,improve yield and are implemented on time
• Participate in cost reduction activities by evaluating design simplification, alternate materials and change of supplier.
• Work with Facility team for implementation of Automation project

Requirements

• Bachelor’s degree in Mechanical Engineering or equivalent required
• Proficiency in Solidworks and AutoCad.
• Familiar with welding technology, material science, machining and stamping parts fabrication processes, with exposure in FEA

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Process in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Process, you will:

Provide engineering support for sustaining production and projects in the Medical and Life Sciences sectors. Responsibilities for sustaining production include quality, productivity, and process improvement. Project work may involve process development, characterization, and production start-up. Ensure all documentation complies with ISO13485 or respective product documentation requirements.

The key responsibilities are as below:

• Lead and provide engineering support and solutions for sustaining production and projects.
• Lead, participate in, and support projects such as line transfer and setup, process development, or automation.
• Provide timely engineering support to ensure the production line runs smoothly and meets operational goals.
• Collaborate closely with production teams and customers to resolve line quality issues.
• Improve and ensure line processes are controlled using SPC, Cpk, FMEA, and other statistical tools.
• Ensure proper maintenance of equipment and achieve uptime/OEE targets.
• Initiate, lead, and implement yield and productivity improvement projects.
• Write IOPQ protocols, perform validations, and manage reporting and documentation.
• Generate and maintain Assembly/Maintenance Work Instructions.
• Implement changes on the line through Engineering Change Notices (ECN).
• Provide training to Technicians and Operators.
• Ensure the production line complies with the ISO 13485 Quality System.

What skills and experiences are we looking for?

• Degree in Mechanical, Mechatronics Engineering, and/or equivalent experience.
• Knowledgeable in SPC, DOE, DFMEA, or plastics bonding process for assembly of medical devices.
• Experience in performing IOPQ protocol and validation or process development.
• Experience working with automated assembly line or supplier on automation project.
• Strong analytical and problem-solving skills, detail-oriented.
• Strong leadership qualities, independent, and a team player.
• Excellent communication and interpersonal skills.
• Enjoy working in cross-disciplinary teams.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Responsibilities

• Responsible for the day-to day planning and implanting of projects
• Manage and coordinate BIM standards development, implementation, and quality on all related files and models
• Provide CAD drafting/BIM modeling support
• Develop BIM plans and understand the scope of work for subcontractors
• Demonstrate a strong understanding of constructions workflow processes and priorities
• Ability to manage multiple ongoing and complex projects while being able to successfully meet the requirements
• Troubleshoot any BIM related issues
• Manage BIM project benchmarks to meet project deadlines
• Contribute to the documentation, dissemination and monitoring of standards, best practices, and industry advancements
• Partner with the field and prefab teams to create plans for the implementation of model-based prefabrication

Required experience

• Minimum 10 years of experience in the construction industry or a Bachelor’s in Construction Management or engineering preferred
• Basic Proficiency with Microsoft Office Suite
• Understanding of Pre-Fab operations and how it relates to the construction process is ideal.