About our group:

We are a dynamic process team to provide sputter engineering support to hard disk media production with the objective of ensuring compliance and conformance to process procedures.

About the role – you will:

• Provide engineering support to production line by ensuring process flow, specification, procedure and documentation.
• Monitor any variables within the process and make the adjustments when required.
• Quick and effective diagnosis and troubleshooting of routine or minor problems.
• Perform process buy-off after equipment preventive maintenance or breaks down.
• Document routine manufacturing processes and report data for shift duty pass-down.
• Conduct or assist the process engineer in carrying out experiments with the objectives of process improvement.
• Continuous improvement on OEE.
• Training and certification for MS and new EA personnel
• Assist in Audit preparation

About you:

• Diploma in Mechanical, Electrical, Mechatronic Engineering, or related Engineering Diploma.
• Self-motivated and positive working attitude.
• Team player with good problem-solving skill.
• Willing to work in clean room environment.
• Willing to work on 12hr (7.30pm to 7.45am) night shift pattern

Your experience includes:

• Fresh graduate welcome
• Relevant experience in the manufacturing industry will be an added advantage
• Possess of Sputter knowledge will be an added advantage

Location:

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our recording media operations. Spread over three sites, it is easily accessible via bus or from the MRT Station, with many employees taking mass-transportation to work. Ample free on-site parking is also available. Here at work you can enjoy breakfast, lunch, dinner and snacks at our on-site canteen and coffee shop. We offer a range of facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities also abound

Responsibilities

• Develop and implement strategies to automate various manufacturing processes and operations
• Lead a team of automation engineers and technicians to design, configure, and maintain automated systems
• Collaborate with cross-functional teams to identify opportunities for automation and process improvements
• Oversee the testing, commissioning, and ongoing maintenance of automated equipment and systems
• Analyse data and metrics to continually optimize the performance of automated processes
• Ensure compliance with all relevant safety and regulatory standards
• Perform internal quality system audit
• Provide training and support to production staff on the use of automated systems

Requirement

• Bachelor's degree in Electrical/Electronic Engineering or a related field
• Minimum 5 years of experience in an automation or manufacturing engineering role
• Proven track record of successfully implementing and optimizing automated systems
• Strong technical expertise in PLC programming, SCADA systems, and industrial robotics
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ
• Excellent problem-solving, analytical, and project management skills
• Ability to effectively lead and motivate a team of automation professionals
• Familiarity with industry standards and regulations related to industrial automation

About our group:

The Media Process Team is at the forefront of innovation, specializing in lubricant application and UV curing technology for enhanced product reliability. Our tape burnish division leverages advanced equipment, along with a myriad of tape materials and abrasives, to ensure exceptional surface quality vital for low flying height testing.

About the role - you will:

• Provide comprehensive support in Media Back End process
• Ensure media manufacturing conformance to the process flow, specification and procedure
• Implement effective process control and audit to ensure product and process compliance/conformance
• Conduct root cause analysis for process issues
• Conduct experiments for yield/process improvements
• Support the setup, troubleshoot and qualification of backend process equipment
• Provide technical assistance to Production Manufacturing Specialists

About you:

• Possess a Diploma in any Engineering discipline.
• A good team player with positive attitude and self-initiative
• Have good interpersonal, communication, problem solving & data analysis skills
• Self-motivated and able to work independently
• Are prepared to work in a Cleanroom Environment
• Are prepared to work in night shift

Your experience includes:

• Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint)
• A strong knack for data analysis and acquisition techniques
• Familiar with Statistical process control and manufacturing workflow

Location:

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our recording media operations. Spread over three sites, it is easily accessible via bus or from the MRT Station, with many employees taking mass transportation to work. Here at work, you can enjoy breakfast, lunch, dinner, and snacks at our onsite canteen and coffee shop. We offer a range of facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities also abound.

Job Description & Requirements

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has set up their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Reporting Relationship

Reporting to this position: Process Engineer Team Size: 5 – 10 Process Engineers

Main Purpose of Job

• Supervise the technology and engineering related to the overall manufacturing process.
• Lead the assessment, implementation, development and improvement of individual unit processes.
• Supervise engineering work for production support activity for chemical manufacturing for productivity and yield improvement, cost reduction, improvement testing/ problem-solving testing.

Key Duties & Responsibilities

• Participate in the design of business planning and factory operations planning and execution based on business project

• Establish Production design instructions and adjustments of manufacturing schedule based on factory operation plan and received orders

• Develop and recommend corporate manufacturing policies and procedures consistent with corporate objectives

• Direct production of all company products consistent with established cost control methods, quality standards and master schedule requirements to support business strategy

• Research, evaluate and recommend investments in technology, capital equipment, systems or other assets that will enhance the organisation’s manufacturing capabilities

• Direct installation and maintenance of all processing equipment used in manufacturing

• Direct the preparation of specifications for purchase as to quality, quantity, delivery and service required for purchase of plant equipment, supplies and materials to meet production schedules and quality standards

• Drive down cost of goods through the initiation and implementation of process improvements in equipment and procedures

• Coordinate manufacturing activities to ensure smooth production of products

• Establish production budgets, monitor the cost and effectiveness of production activities to optimise resources, prioritise spendings, and achieve volume, quality, and manufacturing standards

• Manage quarterly and annual budget reviews to ensure all material and labour cost are included in the factory’s projected budget and spending within budget

• Review vendor contracts, negotiate terms, conditions and pricing for single and multi-build products

• Provide coaching and support to develop the knowledge and skills of all production personnel

• Make decisions on key estimates and factory projects

Facility Management

• Overall in charge of plant facilities operations including equipment installation, preventive maintenance, troubleshooting, EHS in compliance with relevant regulations and authorities

• Ensure smooth production and operations in the plant to meet production targets and customer delivery timelines

Education

• Degree in Business Administration, Chemical Engineering, or relevant qualifications

Experience

• 10-15 years’ experience in the management position in chemical / biomedical / pharmaceutical industry

• Proficient in English. Ability to speak in Japanese is an advantage

Skills

• Understand client production requirements

• Management experience of managing and supervising a team of more than 10

• Knowledge of the latest technological advancements in chemical and related industries

• Strong management, leadership and analytical skills

• Good organizational and planning skills

• Good communication and interpersonal skills

• Good technical knowledge on equipment/machinery and processes

• Good knowledge of production planning, budgetary control and mapower utilization

• Ability to manage and motivate staff

Job Responsibilities:

1. Pre-Sales Support:

Deliver technical presentations and product introductions for security chip solutions to customers.

Provide pre-sales consultation to address customer requirements.

2. Technical Support:

Offer hardware and software debugging and technical assistance during the sales process.

Track, analyze, and resolve technical issues during the after-sales phase.

3. Collaboration with Internal Teams:

Act as a bridge between customers and internal R&D/test teams to address technical challenges and ensure project alignment.

4. Customer and Market Feedback:

Gather customer requirements and monitor industry developments to provide valuable insights to the product and R&D teams.

Use customer feedback and market trends to propose optimization strategies for security chip products.

Gather customer feedback, track industry trends, and provide insights to marketing, sales, product and R&D teams.

5. Project Implementation:

Independently support customer projects across Indico, SEA, Africa mainly, ensuring seamless deployment and resolution of technical issues during product promotion.

6. Location:

Based in Singapore.

Job Requirements:

1. Industry Expertise:

Over five years of experience in the smart card or secure chip industry.

2. Product Knowledge:

Strong understanding of international norms and development trends for overseas banking and ID products.

Ability to write detailed Market Requirement Documents (MRDs).

3. Soft Skills:

Excellent communication, problem-solving, and interpersonal skills.

Strong teamwork, adaptability, and stress management abilities.

4. Travel Flexibility:

Willingness and ability to travel overseas, primarily within Indico and Southeast Asia, for on-site support and consulting.

5. Plus

The candidate who can speak Hindi or Tamil would be a plus.

About Our Group:

Sputtering is the heart of media process in recording media organization. We are a dynamic team working in a world’s largest state-of-the art magnetic media manufacturing environment with highly automated processes and advanced control systems.

We pride ourselves on delivering committed equipment performance and operational objectives through effective maintenance, technology, and innovation to help Seagate succeed. Our team is made up of committed, talented, and friendly people passionate about our job, believing in people well-being and people development.

New employee will have positive experiences with our comprehensive induction and training programs with buddy system.

About the Role - You will:

· Perform preventive maintenance and product conversion of the sputtering tool.

· Execute equipment trouble shooting and follow up on chronic machine issues.

· Lead team of technicians to maintain and improve OEE.

· Work with cross functional teams for continuous improvement and stability of the tool.

About You:

· Positive working attitude and adaptable.

· Team player with good problem-solving skill.

· Willing to work in a clean room environment.

· Willing to work on 12 hours shift pattern.

· Familiar with Mechanical Engineering or equivalent.

· Leadership skill and able to work under minimum supervision.

Your Experience Includes:

· Relevant experience in equipment predictive and prevent maintenance.

· Working experience in PLC controls, vacuum technology, equipment maintenance is added advantage

· Effective hands on trouble shooting on equipment maintenance issues

Ability to work effectively with other teams or continuous improvement

The Recruiter is responsible for Service Excellence throughout the recruitment cycle. They act as a brand ambassador for the client, focused on delivering exceptional talent while providing proactive and timely communication on the status of the search. They serve as subject matter expert in talent acquisition and provide consultative direction and industry expertise to hiring leader.    

• Work Location: Candidates must be open to work in either of the client sites: RR Solutions Asia Pte. Ltd. 10 Tukang Innovation OR 1 Seletar Aerospace Crescent
• Work Arrangement: Hybrid (3x in the client office per week)
• Work Schedule: Day shift/ APAC shift

Specific Requirements:

• Minimum of 5 years' experience in full-cycle recruiting, preferably within the engineering or advanced manufacturing sectors.
• The ideal candidate should possess strong stakeholder management skills and the ability to independently manage the entire hiring process with minimal supervision.  

Responsibilities:   

Finding Candidates:  

• Lead a detailed job scope meeting with the hiring leader to determine position specifications, providing relevant market data and recommendations on possible approaches to the search or candidate requirements.
• Review of candidates who have applied via the Applicant Tracking System (ATS).
• Evaluate candidate qualifications against position requirements and determine who to move forward in the recruitment process.
• Develop and manage recruitment marketing plans or sourcing plans to determine the most appropriate candidate sources that align to the search requirements.
• Source candidates via resume databases, search engine and networking sites using Boolean search language.
• Solicit and pursue referrals from business networks and/or internal referrals.
• Utilize Cielo’s proprietary software for mobile and email campaigning to talent communities.

Engaging Candidates:

• Use an appropriate mix of media to connect with talent communities (phone, email, social media, etc.).
• Articulate value proposition to candidates who are interested in the job opportunity.
• Prepare candidates for interviews, coaching them on logistical information, interview schedule, appropriate attire and overall expectations.
• Ensure candidates are provided with timely updates concerning the status of their applications and interviews.

Assessing Candidates:

• Draft and utilize phone interview templates appropriate to the job description.
• Use independent judgement to compare candidate phone interview notes and skills assessments with position requirements to determine if the candidate is a match for the role or a potential match for other open positions.
• Issue skills testing as needed and evaluate results (if process dictates).
• Review background and reference information (if process dictates).

Influencing the Hire:

• Keep candidates engaged throughout process, ensuring consistent communication on the status of the search.
• Partner with hiring leader to determine offer details, using market data and compensation guidelines to support recommendations.
• Articulate a job offer to candidate and drive for candidate acceptance, anticipating and negotiating counter-offers as appropriate.

Service Excellence:

• Strict adherence to all regulations (OFCCP and all other compliance standards set forth).
• Work to deliver a strong candidate slate, continuously building talent pipelines to ensure there are multiple qualified candidates in play at all times.
• Provide accurate and regular reporting of recruiting activities to the hiring leader and Cielo leadership to depict both metrics and efforts.
• Identify perceived difficulties with searches and research and recommend solutions to both internal and external stakeholders.
• Proactively and regularly communicate the status of each search to the hiring leader, providing a consultative approach with recommendations on how to move forward. 

• Reporting to the General Manager and responsible for technical specification and definition of industrial systems, products and solutions including system and product design, technical sourcing of such systems / products and digitization applications

• To attend technical review with sales team and technical meetings with clients

• To attend coordination meetings with architects, M&E and structural consultants

• To lead a small team of designers; monitor project design submission schedule, check designs and shop drawings, training designers, etc.

• To attend technical meetings with main contractors. Coordinate pipe clashes with M&E and structural services

• Detailed job responsibilities will be provided upon application

Requirements:

• Bachelor Degree in Mechanical Engineering, Automation or relevant fields

• At least 8 years product and application experience in Construction/Engineering industry

• Good business negotiation and presentation skills

• Excellent communication skills with multinational customers and colleagues.

• Ability to lead technical team for business growth. Exhibit flexibility and agility

• Able to work independently with professional judgments, proactivity and team player spirit.

• Revit & AutoCAD proficient

• Candidates available immediately or short notice preferred

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

About our group:

Sputtering is the heart of media process in recording media organization. We are a dynamic team working in a world’s largest state-of-the art magnetic media manufacturing environment with highly automated processes and advanced control systems.

We pride ourselves on delivering committed equipment performance and operational objectives through effective maintenance, technology, and innovation to help Seagate succeed. Our team is made up of committed, talented, and friendly people passionate about our job, believing in people well-being and people development.

New employee will have positive experiences with our comprehensive induction and training programs with buddy system.

About the role - you will:

• Perform preventive maintenance and product conversion of the sputtering tool.
• Work with equipment and process engineering on continuous tool improvement on reliability performance and product defect reduction.
• Initiate ideas on equipment OEE and productivity improvement, safety hazards and cost saving reduction projects.
• Be trained to utilize data analytics and machine learning applications for tool troubleshooting and your feedback will be sought after for further improvements
• Be trained on vacuum technology fundamental and have the opportunities for continual learning and growth.

About you:

• Self-motivated and positive working attitude
• Team player with good problem-solving skill
• Willing to work in a clean room environment
• Willing to work on 12hr (7.30pm to 7.45am) night shift pattern

Your experience includes:

• Diploma in Mechanical, Electrical, Mechatronic Engineering or Diploma or ITE
• Knowledge or experience in Mechanical or Electronics
• Troubleshooting Mechanical or Electrical Equipment is an advantage
• Clean room experience will be an advantage
• Data analysis and MS office skills
• Fresh graduates are welcome

Location:

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our recording media operations. Spread over three sites, it is easily accessible via bus or from the MRT Station, with many employees taking mass transportation to work. Here at work, you can enjoy breakfast, lunch, dinner, and snacks at our onsite canteen and coffee shop. We offer a range of facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities also abound.

Intro to GF

GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF

Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Introduction:

We are expanding our Fab Operations and are looking for Process Engineers, in this role you will sustain and improve process / SPC to meet quality, cost, productivity requirements. Process improvement to eliminate inherent process weakness to achieve company goals.

Your Job:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance.
• Do proper annotation to maintain quality troubleshooting rate for SPC OOC.
• Understand Cp and Cpk indices.
• Monitor critical SPC charts daily.
• Perform process window study and provide improvement plan to reduce OOC and improve CPK.
• Review ESPC charts using SPACE.
• Know all the rules for ESPC.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Raise PCRB and understand the requirement for PCRB opening, follow through with qual plan, analyze data using required software and CR closure.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues.
• Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline.
• Work closely with Equipment Engineer on new equipment acceptance.

Required Qualifications:

• Degree in electrical / electronic / Mechanical / Microelectronics / Chemical process Engineering / Chemistry / Physics
• 2 years of working experience in electrical / electronics industry
• Team Player
• Good ownership and accountability
• Good verbal and written communication skills
• Flexible and able to support overtime
• Self motivated, meticulous, and discipline
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Responsibilities:

• Perform and ensure that assembly builds and test are completed as scheduled and according to required specifications, drawings and work instruction.
• Report and assist Engineers in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.

Requirements :

• NITEC/ Diploma in Mechanical/ Mechatronics Engineering or its equivalent
• Applicants who do not possess the above will be considered on individual merits
• Able to comprehend schematic/ mechanical drawing, is an advantage
• Experience in Orbital Welding and/or Gas Tungsten Arc Welding (GTAW), is an advantage.
• Willing to work in cleanroom environment with shift system (12 hour shift - 8am to 8pm and vice versa)
• Entry level candidates are welcome

Responsibilities:

• Perform and ensure that assembly builds and test are completed as scheduled and according to required specifications, drawings and work instruction.
• Report and assist Engineers in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.

Requirements :

• NITEC/ Diploma in Mechanical/ Mechatronics Engineering or its equivalent
• Applicants who do not possess the above will be considered on individual merits
• Able to comprehend schematic/ mechanical drawing, is an advantage
• Experience in Orbital Welding and/or Gas Tungsten Arc Welding (GTAW), is an advantage.
• Willing to work in cleanroom environment with shift system (12 hour shift - 8am to 8pm and vice versa)
• Entry level candidates are welcome

This role is hired under Mandai X, the growth accelerator and venture building arm of Mandai Wildlife Group.

­­­­­­­­­­­­­­­­­­

We live in a world where the delicate balance with nature has been disrupted. Reversing this trend will require a global effort of unprecedented speed and scale. An impossible task alone. Which is why we challenge ourselves to reach 1 billion consumers, as potential for change can only happen when many come together. And this is where Mandai X can make a difference. Working to influence changes in attitudes, decisions and behaviours.

​

Leveraging over 50 years of experience in inspiring people to value and protect nature as part of the Mandai Wildlife Group, our efforts will spark, catalyse and accelerate innovative ventures in completely new domains to drive growth and impact beyond boundaries. Eliminating the well-entrenched trade-offs faced between commercial, human and the planet’s wellbeing; and blending everything together so that these usual conflicts faced are aligned.

We will redefine what a better life means; and unleash humanity’s collective power to make this change through impactful ventures that enable and empower individuals and companies with everyday choices that not only help them, but also make the world a better place at the same time.

Welcome to Mandai X.

Empowering every pet parent to nurture happy, healthy pets while embracing and advocating for all animals and wildlife.

Mandai X is building a venture that speaks to a deep unfulfilled need pet parents experience – trustworthy guidance for happy, healthy pets. The venture focuses on bringing personalized, effective and accessible care to "pawrents", tailored to the unique needs of their pets.

We are looking for an experienced Engineering Lead (EL) who is moved by a desire to protect and nurture all wildlife as they are about nurturing happy, healthy pets!

As EL you will be responsible for product definition and delivery, working with multidisciplinary team members across design, engineering, business and corporate stakeholders to deliver high quality products, and define the cadence of Engineering best practices.

In this role you will:

Drive technical strategy, architecture and roadmap

• Set the technical vision, strategy and architecture from concept to future state to drive short-and long-term impact
• Partner with internal C-suite and broader corporate stakeholders, cross-functional peers in Engineering, Design and Commercial to translate technical vision into a technically feasible roadmap

Deliver products par excellence

• Lead and drive software delivery, providing visibility of progress and performance
• Effectively align teams and resources to achieve key business priorities on time and at the appropriate scope and highest quality
• Pitch in with code, code reviews, architectural reviews and technical mentoring whenever necessary
• Direct and drive high volume product pushes focusing on speed and quality
• Ensure all internal processes and external services comply with security and privacy policies and regulations (data compliance in particular)
• Build an efficient end-to-end application infrastructure, applying standard methodologies in software estimation and delivery
• Ensure that overall technical practices are scalable, constantly evaluating tech stacks to cater to evolving business needs
• Define and implement an effective, transparent and repeatable process for quality assurance (QA) across all areas of the organization including product development

Build team and drive engineering culture

• Build a team of capable engineers, developing the careers and technical capabilities of all team members
• Cultivate a strong culture of experimentation, delivery and impact
• Identify, validate and manage collaboration with 3rd party services and resources where required

You should have:

• Experience as a full stack engineer with expertise in at least 2-3 languages and frameworks
• Built products 0-1 or end-to-end from initial concept to market launch and testing and iteration, for instance at startups or digital consultancies
• Worked with senior corporate stakeholders and/or familiar working in corporate environments
• Experience building full stack web applications
• Built products for enterprise with a focus on security considerations
• Proven ability to hire, mentor and lead engineering teams
• Worked collaboratively and mobilized multiple stakeholders across multiple disciplines to drive desired outcomes
• Excellent communication and coherence of thought to be able to distil and explain complex technical concepts to general audiences

Additional desired competencies:

• Experience with Node, React, Next.js, REST APIs, Azure, Docker
• Experience building B2C SaaS platforms
• Adaptable, flexible, willing to grow with an evolving organisation and work-scope
• High resilience with an equally high degree of responsibility and accountability

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add a Senior Engineer, Facility Engineering in Singapore. The position will be based in our GES Site in Marsiling.

As a Senior Engineer, Facility Engineering, you will:

Lead in Facilities Management (FM) on soft and hard service for site. Planning and scheduling in carrying out daily facilities support functions for Facilities Management. Possess experience leading a small team of both administrative/technical staff. Lastly, experienced in energy saving and improvement and Project Management (Renovations)

The key responsibilities are as below:

• Experience in Integrated Facilities Management in both soft and hard services.
• To take up as site Fire Safety Manager as requirement set by SCDF.
• Daily building walkabout to pick up and address maintenance and safety gaps.
• Coordination and effective communication with internal users, service partners as well as vendors for work.
• Prepare site related SOPs and guides to train technical personnel.
• Able to prepare Request for Quotes, source quotations and to prepare justification and summary papers for management approval.
• Raise Purchase Request / executive summary for management approval.
• Assist in preparing Master Maintenance Schedule, follow up maintenance schedule
• Ensure work delivery is of highest quality from vendors.
• Coordinate closely with HQ FM on Facilities Management approaches.
• Conduct tool box / safety briefing to vendors before commencement of work.
• Submission of Monthly Management Report (MMR) and ESG monthly reports.
• Respond to internal customer and external vendors service enquiries and closing.
• Perform any other duties relating to facilities management as assigned by the Company.

What skills and experiences are we looking for?

• Degree in Engineering / Facilities Management.
• Manufacturing environment / Managing Agent background preferred.
• With at least 5 to 8 years relevant experience in Facilities / Building environment.
• Problem solving with good solution approach to work and staffing matters.
• Fire Safety Awareness Course
• WSHO (Advantageous but not a must)
• Effective communicator, highly resilient and able to work under pressure
• Hands on in equipment maintenance and trouble-shooting.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction

ESD and latchup development engineer to work on Singapore technologies including by not limited to 180nm through 40nm programs developing novel ESD device solutions. Position will include customer interface/support, defining/implementing ESD and latchup test structures, characterizing and modeling ESD devices and producing ESD design guides used to support customers.

Your Job

· ESD device design rule and high current model release for 180~28nm CMOS/BCD technology

· HV (12~85V, 100/200V) ESD device development and characterization in 180~28nm CMOS/BCD technology

· ESD device compact modeling

· ESD reference guide creation

· Customer support for ESD inquiries

· ESD device TCAD simulation

Required Qualifications:

· PhD in Electronic Engineering, Master/Bachelor degree in Electronic Engineering

· Good Team player

· Working in Singapore

Preferred Qualifications:

● Python

● C++

● VLSI study and intern experience

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Are you highly motivated, enthusiastic, and possess excellent drafting skills? Join our growing company, where we offer not only a challenging career in an innovative technology environment but also competitive high salary. Once you start working at Eetarp, you will never change again :)

We are currently seeking an Electrical Drafter for our office in Singapore. If you're ready to take your career to the next level, we welcome your application.

Job Description:

• Drafting of control panel drawings including but not limited to single line diagrams, schematics, layouts, panel front/side/rear views.
• Collaborate with the engineering team to refine and optimize designs.
• Coordinate with suppliers with precise fabrication drawings and ensure timely fabrication.
• Possess the ability to read and interpret architectural drawings.
• Develop as-built drawings to reflect completed construction projects.
• Manage revisions and updates to drawings as required by project changes.
• Contribute to improve designs and detailing.
• Maintain organized records of drawings and related documents, for eg. bill of materials.
• Execute list of jobs in accordance with the Manager’s instructions.

Requirements:

• Basic knowledge of electrical components and control panels.
• Minimum 2 years of relevant experience.
• Proficiency in AutoCAD or related software.
• Ability to manage multiple tasks and meet deadlines.
• Self-driven and able to work independently.
• Ability to communicate effectively with co-workers, both orally and with written correspondence.
• Positive attitude, self-motivated, Team Player.

Are you a motivated and enthusiastic professional with exceptional programming skills? Join our dynamic and innovative team in Singapore as a Project Engineer!

At our fast-growing company, you'll enjoy an exciting career in a cutting-edge technology environment and benefit from a highly competitive salary.

If you're ready to elevate your career and make an impact, we'd love to hear from you. Apply now and become part of our journey to shape the future!

Job Scopes

• Site coordination, project schedule planning, coordinate site works with subcontractor
• Design and deploy HVAC controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services
• Prepare and submit operations and maintenance manuals
• Projects management and implementation and troubleshooting

Requirements

• Strong protocol Knowlagent for Modbus/BACnet/OPC and etc
• Familiar with HVAC controlling and building automation system.
• Knowledge on HVAC, power meter, PLC and SCADA
• Strong troubleshooting skill
• Strong analytical mind
• Self-motivated and team player
• At least 1 Year(s) of working experience in the related field is required for this position.

Job Description & Requirements

• Assist the Factory Production Manager in supervising the factory/production Team Leaders and workers by overseeing fabrication work for quality consistency and operation efficiency, based on AutoCad drawings and Designs and prepare weekly production plan.
• Ensure all workers follow industry standard health and safety guidelines with weekly WSH safety meeting.
• Make sure daily work plan, PPE, goods arrival and unloading are carried out smoothly , timely, and completely.
• Innovate and automate for improved production output and overall efficiency with new automated or robotic machines and work flow.
• Liaise and manage fabricated products are ready with project engineers for installation at sites.
• Check Team Leaders record of materials in and out of factory to project sites, all stock and inventory is maintained with accuracy and up to date.
• Organise and upkeep factory storage and movement of inventory are smooth and efficient.
• Assist to source better and cost savings materials from overseas and liaise with overseas suppliers for stock replenishing.
• Involve in the annual ISO and bizsafe renewal.
• Improvise designs for overall efficiency of system parts and communicate with key personnel.
• Manpower planning and workers training to make sure workers are equipped with relevant knowledge and skills.
• Need autocad, fabrication, welding knowledge to check drawings and making sure welders are fabricating correctly.
• Assist purchaser to source for materials overseas.

Requirements :

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• 3 to 5 years work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

Join a fast-growing international company at the forefront of technological innovation! At Eetarp, we offer you not just a career but an opportunity to thrive in a challenging, rewarding, and supportive environment. With a competitive salary, you’ll enjoy a fulfilling role that inspires growth and success. Once you start working with us, you’ll never want to leave!

We are seeking a Procurement Engineer for our Singapore office. Take the next step in your career—apply now and become a key part of Eetarp’s exciting journey.

Job Description:

• Using the ERP system to create PO & analyze stock level.
• Support internal coordination between different departments.

-Follow up & update of orders lead time to Sales & Production Team.

• Supply Chain and Cost Management

-Coordinate with local & overseas Vendors.

-Plan and manage resources to maintain optimal stock levels, ensuring availability of materials while minimizing excess inventory.

-Monitor all purchases & follow up on orders lead time closely.

-Coordinate delivery of purchased goods to office.

-Communicate with suppliers when issues arise (eg. shortage, overcharges, and defects of materials).

-Source new suppliers for materials and services, expanding the suppliers base.

-Obtain competitive quotes and drive cost-reduction.

-Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/services.

-Conduct supplier’s performance review to ensure compliance with organizational standards.

• Technical Procurement and Documentation Management

-Ability to understand Bill of Materials and Technical Drawings for procurement purposes.

-Providing correct technical information in accordance with datasheet for new item creation in ERP system.

-Proper archive of calibration certificate and software license information in our server.

• Any duties as assigned.

Requirements:

• At least Diploma.
• At least 2 years’ experience in procurement, with electrical engineering background (knowledge/experience).
• Have strong communication, analytical & negotiation skills.
• Able to allocate resources flexibly to meet changing demands and project requirements.
• Team player, proactive, problem solving.
• Able to work independently and multitask.

Organizational Relationships: • Reports directly to Project Director.

Authorities: In charge of planning, executing, and finalizing projects according to strict deadlines and within budget. This includes acquiring resources and coordinating the efforts of team members and third-party contractors or consultants in order to deliver projects according to plan. In addition, the Project Manager will also define the project’s objectives and oversee quality control throughout its life cycle.

Responsibilities:

1. Typical duties will include but not be limited to the preparation and/or modification of the following:

• Civil/Structural engineering plans, design, and layout.
• Civil/Structural project specifications.
• Civil/Structural engineering portion of project proposals.
• Civil/Structural engineering portion of project cost estimates.

2. Provide drawing for own designs and produce sketches to incorporate in drawings by drafters.

3. Develop probable construction cost estimates for projects.

4. Use computer-assisted engineering design and software and equipment to prepare engineering design documents.

5. Perform field activities such as observe and record existing field conditions, take and verify measurements within project

area.

6. Direct and manage project development from beginning to end.

7. Define project scope, goals and deliverables that support business goals in collaboration with senior management and

stakeholders.

8. Develop full-scale project plans and associated communications documents.

9. Effectively communicate project expectations to team members and stakeholders in a timely and clear fashion.

10. Liaise with project stakeholders on an ongoing basis.

11. Estimate the resources and participants needed to achieve project goals.

12. Draft and submit budget proposals, and recommend subsequent budget changes where necessary.

13. Where required, negotiate with other department managers for the acquisition of required personnel from within the

company.

14. Determine and assess need for additional staff and/or consultants and make the appropriate recruitments if necessary

during project cycle.

15. Set and continually manage project expectations with team members and other stakeholders.

16. Delegate tasks and responsibilities to appropriate personnel.

17. Identify and resolve issues and conflicts within the project team.

18. Identify and manage project dependencies and critical path.

19. Plan and schedule project timelines and milestones using appropriate tools.

20. Track project milestones and deliverables.

21. Develop and deliver progress reports, proposals, requirements documentation, and presentations.

22. Proactively manage changes in project scope, identify potential crises, and devise contingency plans.

23. To carry out any tasks that is required by Management and as assigned for upholding the ISO 9001: 2008 and OHSAS

18001:2007 Intergrated Management System.

Qualifications:

1. Educational Qualification: Bachelor Degree in Civil Engineering or equivalent.

2. Relevant Experience: 2 years in project management, with special focus on structural engineering.

3. Computer Literacy: Advanced experience with Microsoft Office, AutoCad and StruCad and Project Management software.

Competency Requirements:

In a multicultural environment / work force, the incumbent should:

• be proficient in English
• have strong interpersonal skills, including written and oral communication skills.
• be persuasive, encouraging, and motivating.
• possess the ability to defuse tension among project team, should it arise.
• possess the ability to effectively prioritize and execute tasks in a high-pressure environment is crucial.
• possess the ability to read communication styles of team members and contractors who come from a broad spectrum of disciplines.
• possess the ability to shift priorities, demands and timelines through analytical and problem-solving capabilities.
• react to project adjustments and alterations promptly and efficiently.
• possess the ability to elicit cooperation from a wide variety of sources, including upper management, clients, and other departments.

Roles & Responsibilities

Requirements:

• Candidate must possess at least a Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering or equivalent.
• At least 7 Years) Working experience in the related field is required for this position.
• Required Skill(s): Project Management
• Preferably, a Manager specialized in Engineering - Civil/Construction/Structural or equivalent.
• Singaporean/SPR

Responsibilities:

• Monitor and manage the day-to-day operations of the project, or function, including developing and monitoring budgets, coordinating activities with other subcontractors
• Handle contractual matters that arise
• Check drawings and quantities and ensure that these are accurate for the execution
• Oversee the selection and requisition of materials required at the site.
• Plan the work schedule and efficiently organize the site facilities to meet an agreed program of deadlines;
• Liaise with consultants and/or sub-contractors engaged in the project;
• Attend regular meetings with owner/client/contractors/sub-con and ensure the progress is on schedule;
• Oversee quality control and safety matters on the site;
• Resolve any unexpected technical difficulties and other problems that may arise
• Overall responsible for the execution of the projects
• Monitor the cash flow and budgeting of the project
• Accountable for the project’s projected profit
• Identify and comply with all applicable statutory/regulatory requirements for the project under his/her jurisdiction.
• Monitor work progress to ensure the project stays on schedule.
• Ensure in-progress inspection and joint inspection Monitor work progress to ensure the project stays on schedule.
• Carry out in-progress inspection and joint inspection
• Conduct safety and environmental risk assessment of projects handled
• Ensure staff work in a safe and orderly manner
• Ensure toolbox meetings are carried out for the project.
• Identify QEOHS training needs of subordinates

Job Scope:

• Working experience with metal Works
• Able to communicate and meet consultants requirement
• Monitor and control project material delivery in accordance to schedule
• Preparation of detail program for site team to follow accordingly and completion on time
• Manage and monitor site progress
• Any other duties to be assigned

Requirements:

• Good working attitude, committed and ability to meet tight schedules.
• Solid organization skills including attention to details and multi-tasking skills.
• Excellent spoken and written communication skills.
• Minimum 3 years of working experience in Project Management in residential, government and commercial building projects (preferable in Building metal Work).
• Candidate must possess at least Diploma and/or Degree in Civil Engineering and or related field with relevant experience

• Familiar with evaluation of tenders, preparation of tender and quotation.

• Responsible for taking off measurement and monthly progress claim.

• Ability to source for supplies and sub-contractors for quotation for tendering.

• Project administration and documentation include preparation of interim.

• Review and advise the Project Manager on the cost impact for variation of project specification.

• Minimum Diploma in Quantity Surveying or a related field.

• A minimum of 2 years work experience in structural steel works is necessary for this position.

•full-time position available.

•All applications to be strictly via emails.

finance executive.

account mothly closing.

perform monthly bank reconcililation.

perform coding of accounts.

prepare quarterly GST returns.

handle full cycle of recruitment matters.

manage full spectrum of monthly payroll processing and administration.

perform general HR adminisstrative function such as processing of work pass. preparation of appointment, confirmation letter, insurance claim for hospital, surgical and work injury compensation.

Job Description:

• Able to read & interpret tender specifications/ drawings.
• Good knowledge of contract and QS procedures and pricing.
• Responsible for the preparation of a complete mechanical (Air Conditioning and Mechanical Ventilation) tender, including tabulate pricing, sourcing of supplier, BQ takeoff and Value Engineering, etc.
• Responsible for collating tender documents for submission.
• Perform administrative duties assigned.

Job Requirements:

• Diploma/ Degree in Mechanical Engineering.
• Minimum 6 years' relevant experience with proven track record.
• Interdependent with good communication skills.
• Must possess good working attitude with self-motivation and commitment.
• Possess competency in using Word, Excel, PDF converter, etc.