Job Highlights:

• We offer attractive salary commensurate with work experience
• Good and friendly working environment

Job Descriptions:

• Supervise the Engineers in project planning and to coordinate and oversee all works on the site
• Monitor & co-ordinate the works with supervisors
• Handling of technical and engineering problems
• Assist the Project Manager in planning, programming and monitoring of construction works progress
• Liaison with client's representative, relevant authorities and consultants
• Identify and assess any foreseeable risk arising from the workplace or work processes, minimise environmental impact associated with the construction activities
• Take reasonable practical measures to eliminate any foreseeable risk to any person who is at the workplace
• Ensure safe work procedures and environmental control measures are implemented at the work site

Job Requirements:

• Degree in Civil / Structural Engineering or its equivalent
• Preferably Degree be recognized by Board of Engineers
• Min 5 yrs experience in Residential/Industrial/Commercial and/or Institutional projects

Responsibilities:

• Responsible for overall creation of BIM models.
• Facilitate use of composite trade models in construction coordination/clash detection meetings and provide detection reports by the identification and resolution of all hard and soft collisions.
• Communicate with the Consultants and coordinate the data extraction sets required by the construction trades and ensure that these requests are met.
• Coordinate with the Consultants to document and update design changes in the field in a timely manner.
• Work with Lead Fabrication Modellers to integrate 3D fabrication models with the updated design model to ensure compliance with design intent prior to approval and installation.
• Attend VDC/Technical meetings and progress meeting with the consultants and Developer. Organise, initiate and lead all walkthrough sessions.
• Assist VDC Manager, collect information from site coordinators and create VDC progress, simulations and schedules for presentation.
• Support Project Management on all VDC and IDD related matters.
• Responsible for accurate and organized Revit (BIM) models and generate schedules, concrete body plans, combined service drawings and other relevant shop drawings from BIM Models.

Requirements:

• Degree/Diploma or equivalent in Architectural / Civil & Structural/ Electrical & Mechanical.
• Well versed in AutoCAD, Revit Architecture, Structure, MEP, Navisworks, Enscape and Synchro.
• Must possess relevant BIM or VDC (Diploma or Training Certification) At least 5 years’ experience of BIM modelling and coordination in construction firm of a large project.
• Able to work with minimum supervision and able to manage tight deadline.

Responsibilities:

• Responsible for pre and post contract QS services;
• Handles interim and final payment claims and feedback comment to payment response to Management
• Job site visiting and monitor site progress
• Responsible for quantities taking-offs, work out variations claim, verify measurements with the client
• Handles contract administration and settlement of final accounts with clients & subcontractors;
• Monitors project phasing & payments;
• Preparation & Revision of Construction Programmes & follow-up delay claims

Requirements:

• Degree in Applied Science in Construction Management or Diploma in Building Services / Mechanical / Electrical engineering
• Able to meet challenging work demands and tight schedules
• Good interpersonal and communication skill
• Good command of spoken and written English
• Independent and resourceful

Duties & Responsibilities:

• Able to lead site safety team
• Develop, review, revise, maintain and implementation of site Workplace Safety & Health Management System effectively to manage risks and reduce accidents
• To investigate all incidents on the work site and implement correction actions.
• Review and revise all risk assessments to ensure compliance.
• In-depth knowledge of the WSH regulations.
• Enforcement of safety standards in accordance with the Workplace Safety and Health Act and provisions.
• Ensure legal compliance as per statutory requirements.
• Conduct regular WSH inspections on general safety practices and audit to ensure that staff and/or subcontractors onsite abide by policies and standards
• Alert relevant stakeholders of any machinery, equipment, appliance, activities or process used in each department that exposes any person to risk of bodily injury, and to recommend appropriate corrective measures.
• Preparation and/or submission of safety documents to the client/main -contractor/WSH Corporate Department.
• Able to drive WSH culture in the company
• Ensure adequacy, effectiveness and readiness of fire protection system and Emergency Response Team management system for Office and Factory.
• Promote safe and healthy working conditions through education, awareness campaigns, training courses, drills, competitions, contests and other activities.
• Liaise with statutory bodies on WSH-related licenses and permits and keep updated on the latest change in regulations and Acts and be conversant with all waste management regulations, procedures and licensing requirements.
• Conduct fire and safety training to employees.
• Constant update to management of WSH performance and the continual improvement plan.
• Liaise with 3rd party security service provider and ensure the appropriateness and effectiveness of services rendered to organization.
• Constant plan-do-check-act on the related WSH matter of plant's WSH Management System and ensure continual improvement/upgrading of the system.

Qualifications & Experience:

• Registered as WSHO with MOM
• More than 3 years of experience performing as a WSHO
• Registered WSHO without/less than 3 years of WSHO experience will be considered as a Junior WSHO.
• Relevant Qualification in Workplace, Safety and Health / Engineering.
• Strong technical competency, good interpersonal and communication skills.
• Ability to work independently and results oriented.

Key Responsibilities:

• Manage end-to-end project lifecycle, including planning, execution, monitoring, and closure, ensuring projects are completed on time, within scope, and budget.
• Collaborate with clients, consultants, and internal teams to define project requirements, deliverables, and timelines.
• Develop and maintain project schedules, budgets, and resource allocation plans.
• Ensure compliance with fire protection standards, regulations, and codes throughout project execution.
• Supervise and coordinate the work of subcontractors, engineers, and field technicians.
• Conduct regular site inspections to monitor progress, ensure quality standards, and address any issues.
• Prepare and present progress reports to stakeholders, highlighting milestones, risks, and mitigation strategies.
• Facilitate effective communication among project stakeholders to ensure alignment and timely resolution of challenges.
• Lead risk assessment and implement strategies to minimize project risks.
• Drive continuous improvement initiatives to enhance project efficiency and outcomes.

Qualifications and Requirements:

• Bachelor’s degree in Mechanical Engineering, Civil Engineering, Project Management, or a related field.
• Minimum of 5 years’ experience managing fire protection or related construction projects.
• Strong knowledge of fire protection systems, codes, and standards (e.g., NFPA, FM Global, or equivalent).
• Proven ability to manage multiple projects simultaneously and deliver high-quality outcomes.
• Proficiency in project management software (e.g., Microsoft Project, or equivalent).
• Excellent problem-solving, leadership, and decision-making skills.
• Strong communication and interpersonal skills to effectively collaborate with clients, team members, and stakeholders.
• CSCPM and Managing WAH certification is required.

• To perform drawing and design work by using BIM Software;
• Ensuring that all drawings are compliant with project specifications and requirements;
• Assist in manage day-to-day project operations including coordinating activities with construction team and liaise with all party involved in the project;
• Assist to supervise and control sub-contractors/ workers to carry out their works accurately and ensure timely completion of projects to the contract drawings and specifications;
• Assist to monitor construction / project progress, ensure productivity, legal compliance and all safety precaution till completion of projects;
• Co-ordinate and establish good working relationship with project team, clients, consultants and sub-contractors to facilitate effective co-ordination of work activities.

This role is responsible for managing the contracts, document control and other administrative aspects of the complete life cycle of the project.

Responsibilities:

• Coordinate document flow over client, subcontractors and internal documentation like project plans, manuals, blueprints, progress reports, vendor contracts, technical submissions, or equivalent and drawings etc.
• Maintain an organized filing system (PEP) to meet our ISO requirements.
• Processing goods received and updating the system.
• Support team in compilation of invoices, tracking inventory/equipment listing
• Other administration support to home office and site team for infrastructure set up, manpower allocation, time attendance & leave management, etc.
• Ordering of grocery & stationary from home office
• Schedule for water dispenser, copier & plotter maintenance
• Other ad-hoc duties as assigned by Project Manager

Requirements:-

• Minimum Diploma & Above.
• Able to work independently with at least 2 year of Project Administration experience.
• Competent in MS Office
• Good interpersonal and communication skill
• Good command of spoken and written English

• Provide driving service in/out of workshop
• To shift vehicles in and out of workshop for repair and services after registration at counter
• To send vehicle to LTA inspection
• To arrange and park vehicle properly and orderly in docking area
• To conduct road test for vehicle as required
• To assist in handling/taking over of courtesy vehicle
• To assist in checking courtesy vehicle status
• To assist in collection and sending vehicles outside workshop
• To ensure docking area tidiness and cleanliness
• To assist Service Department with adhoc trips such as collection of payment/spares
• To assist in washing/cleaning of Service Department courtest vehicle

Requirements

• Class 3 & 4 Driving License

• JOB DESCRIPTION
• Preparing specifications for purchases of electrical equipment and materials.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Supervising or training project team members.
• Power Distribution Planning: Design power distribution systems for the bored tunnel and the entire site.
• Maintenance and Troubleshooting: Conduct maintenance and resolve issues for TBM, electrical systems, locomotives, batching plants, cooling towers, and other tunnel facilities.
• Manage and supervise projects, electrical inspections, and licensing tasks assigned by the Project Manager.

Job Description:

1. Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission

2. Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.

3. Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.

4. Complete work order for each vehicle and unit serviced.

5. Adhere to defined guidelines in regards to safety, orderliness and etc.

6. Performs ad hoc duties as assigned by Superiors

Job Requirements:

1. Academic qualification: NTC 2 / Diploma Automotive Technology or equivalent

2. Competent in basic English (verbal & written)

3. Prefers candidates with at least class 3 driving license

4. Prior experience of at least 2 to 3 years in performing automotive service repair (commercial vehicle)

Job Title

Engineer

Occupation

ENGINEER

Job Description & Requirements

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

We are a Renovation Contractor company specialising in commercial and residential projects. We are looking for a Project Coordinator or Quantity Surveyor with relevant experience in the Renovation Contractor industry. Candidates with more years of relevant experience will be considered for senior roles.

Responsibilities

• Attend meetings with clients, consultants, contractors and other stakeholders
• Ensure proper tracking of renovation project deadlines and deliverables
• Preparation of Quotations
• Preparation of Project Status reports and updates
• Liaise with building management and consultants to ensure timely and accurate submissions
• Liaise with new customers on their queries and understand their renovation needs

Requirements

• 5.5 days work week (Saturday half day)
• Bilingual in both English and Chinese to liaise with internal and external Mandarin speaking stakeholders
• Candidates must have at least 2 years relevant renovation contractor industry working experience
• Experience in using Microsoft Excel
• Meticulous, good attitude and willing to learn

Please contact us at [email protected] for further queries.

Job Description:

The Laboratory Officer will be responsible for the efficient operation of the vapor deposition lab, focusing on both physical vapor deposition (PVD) and chemical vapor deposition (CVD) techniques. This role requires a strong technical background in thin film deposition processes, excellent organizational skills, and the ability to collaborate effectively with research teams. The Laboratory Officer will work closely with the research engineers and scientists to oversee lab operations and provide support to ongoing projects. Key responsibilities include:

Lab Management:

• Manage day-to-day operations of the vapor deposition lab, including equipment maintenance, process optimization, and safety protocols.
• Ensure that the lab is well-equipped and stocked with necessary materials and consumables for PVD/CVD processes.
• Coordinate with vendors for procurement of deposition materials, gases, and other supplies as needed.
• Maintain a clean and safe working environment in accordance with laboratory standards and regulations.

Process Optimization:

• Develop and optimize deposition processes for thin film fabrication using PVD and CVD techniques.
• Conduct experiments to characterize film properties, optimize deposition parameters, and troubleshoot process issues.
• Collaborate with researchers and project teams to identify and implement improvements in deposition quality, yield, and efficiency.

Experimental Support:

• Provide technical support to researchers and project teams for experimental setup, process monitoring, and data analysis.
• Assist with the design and fabrication of thin film devices and structures for research applications.
• Perform routine calibration and maintenance of deposition equipment to ensure reliable and reproducible results.
• Document experimental procedures, results, and observations in detailed lab reports.

Project Support:

• Collaborate with project teams to support the execution of research projects requiring thin film deposition capabilities.
• Manage project timelines and deliverables to ensure that milestones are met in accordance with project objectives.
• Communicate regularly with project stakeholders to provide updates on progress and address any technical challenges or concerns.

Training and Development:

• Provide training and guidance to new lab members on proper laboratory techniques, safety procedures, and equipment operation.
• Stay informed about advancements in thin film deposition technology through literature review and professional development activities.
• Share knowledge and best practices with other members of the research team to enhance overall productivity and effectiveness.

Requirement:

• Diploma or equivalent qualification in Electrical Engineering/Materials Science and Engineering/Mechanical engineering, or a related science and engineering field.
• Proven experience working in a laboratory setting, with a focus on thin film deposition techniques such as PVD and CVD.
• Strong understanding of deposition processes, including vacuum systems, gas flow control, and substrate preparation.
• Preferred to have good hands-on experience with system maintenance.
• Ability to work effectively independently.
• Ability to work effectively in a team.
• Ability to manage multiple tasks and priorities effectively.
• Proficiency in operating and troubleshooting deposition equipment.
• Strong communication and interpersonal skills, with the ability to work collaboratively in a team environment.
• Commitment to maintaining a safe and compliant laboratory environment, with knowledge of relevant safety regulations and procedures.

Note: Some of above requirements are optional but advantageous to have.

• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawing.
• Work with purchaser to source & make orders for all materials required and purchase the required materials according to project timeline.
• Supervise and monitor workers / welders on site for installation or maintenance.
• Attend site meetings with clients / architects and authorities on project technical matter.

Requirement:-

• Minimum Dipoma and Degree in Mechanical Engineering.
• Required skill(s) MS Office, MS project, Autocad.
• Has work experience in consruction sites and project management.
• Responsible, detail-oriented and able to multi task.
• proactive team player with the ability to work independently in challenging projects and timelines.
• Possess Class 3 driving license will be an advantage.

1. Lead and set a goal for sales and operation team

2. Set direction and guide the project team for all the project

3. Review value engineering and lean engineering

4. Liaising with main contractor, owner, stakeholder & consultant

5. Check and ensure the scope of work for all the fire protection system and services

6. Overseeing current project as well upcoming projects

7. Attend and conducting project review meeting with sales and operation team and attend client meeting

8. Ensure the project delivery as planned schedule and manage operational cost within the budget

9. Review and submit authority required documents

10. Monitor compliance of work with the workplace safety and health regulations

11. Maintain customer relationship

12. Other ad-hoc duties as assigned by managementCon

Job Description:

• Operate the Vehicles in a safe and effective manner by observing road safety, and comply with the relevant regulations, policies, and procedures.
• Responsible, proactive, and alert.
• Maintain and ensure the cleanliness of company and customer's vehicles.
• Ensuring the vehicle is free from dirt, dust and debris
• cleaning and polishing exterior surfaces, including paint, wheels and windows
• performing routine checks to ensure the vehicle is in good condition
• Reporting any damage or maintenance needs to Operations Supervisor.
• Maintain and ensure the cleanliness of factory including: sweeping & mopping floors, cleaning & sanitizing equipment and machinery, removing trash & recyclables, organizing & tidying workstations & storage areas, performing regular deep cleaning and disinfection of high-touch areas
• Ensuring compliance with safety and health regulations
• Assisting in loading/unloading.
• Any other ad hoc duties.

Requirements:

• Possess valid Class 3/4 driving license to drive in Singapore with clean driving records and no records on suspension.
• 6 days a week. (Mon - Sat 8am - 5pm)
• Preferably with at least 3 years experience.
• Physically fit & strong.

Job Description:

1. Preferred experience in all commercial vehicles & big trucks.
2. To perform vehicle inspection checking, vehicle servicing, repair, engine overhaul, and replacement of components/parts.
3. Troubleshoot vehicle problems using diagnostic equipment.
4. Test parts and systems to ensure that they are working properly after repair.
5. Use testing equipment to ensure repairs and maintenance are effective.
6. Any other ad-hoc duties assigned by the Manager.

Requirement:

1. Minimum 5 years automotive workshop experience.
2. Able to start work immediately.

We are a well-established construction company with an enviable track record in major civil engineering and building works. To meet our continuing growth, we require suitably qualified candidates for the following position:

Responsibilities:

• Prepare tender and contract documents, including bills of quantities

• Able to do cost estimation independently and accurately

• Taking off quantity for tender

• Final account preparation

• Monthly progress claim

• Certification of sub-contract works

• Liaise with clients, architects, engineers, surveyors and sub-contractors

• All other related works

Requirements:

• Degree / Diploma in Quantity Surveying / Building or equivalent from a recognized University

• Min 2 - 4 years’ relevant experience

• Good working knowledge in Residential projects, Building & M & E

• Good knowledge of local rules and regulations

• Able to handle take-off, tender etc

• Only Singaporeans and PR

We are a Renovation Contractor company specialising in commercial and residential projects. We are looking for a Marketing Assistant Manager / Manager with relevant experience in the Renovation Contractor industry. Candidates with more years of relevant experience will be considered for senior roles.

Responsibilities

• Experience in using chinese social media platforms such as 小红书, Tik Tok, Douyin, Instagram, Facebook
• Good working knowledge in design / script writing to generate content for the various entities above-mentioned
• [Optional] Experience in website management (Wordpress) will be advantageous
• [Optional] Experience in using and implementing AI on website / social media platforms to aid with customer service queries will be advantageous
• Any other adhoc admin duties

Requirements

• Bilingual in both English and Chinese to liaise with internal and external Mandarin speaking stakeholders
• Ideally 2 years relevant renovation contractor industry working experience
• Experience in using design software such as Adobe
• Meticulous, good attitude and willing to learn

Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Coordinate with Engineering and construction team to develop comprehensive commissioning plans and schedules
• Work closely with vendors, Engineering and construction team to plan and execute commissioning activities
• Identify and resolve issues encountered during commissioning activities promptly and effectively to minimize downtime and ensure project timelines are met
• Review schematics of critical equipments, test procedutes to ensure smooth integration into power grid
• Maintain records of commissioning activities, test results, and equipment performance data
• Participate in meetings with client and vendors
• Ensure adherence to all safety protocols and regulations
• Any other duties to be assigned from time to time

Pre-requisites

• Degree/Diploma in Electrical Engineering or related field
• Minimum 5 years of experience in commissioning of power plants
• In-depth knowledge of electrical systems for critical equipments in power plant construction
• Strong understanding of commissioning processes, procedures, and best practices
• Proficiency in interpreting engineering drawings, specifications, and technical documents
• Excellent problem-solving skills and ability to work effectively under pressure
• Effective communication and interpersonal skills for collaboration with multidisciplinary teams
• Commitment to safety and compliance with regulatory requirements
• Project Location: Jurong Island (Transport provided at designated pickup points)

Job Responsibilities:

* Responsible for all works related to M&E Quantity Surveyor duties.

* Preparing cost estimation and identify variation works.

*Resourceful and Outcome-based attitudes to explore any new arisings

*Experience in Project Tender Documentation and Submission requriement

*Require to attend Tender Site Show-arounds and Project Meetings with Project Director/Manager

Job Requirements:

* Diploma/ Degree in Mechanical/ Electrical/ Quantity Surveying or equivalent.

1）assisting with recruitment, posting job vacancies, reviewing job applications, arranging interviews with suitable candidates and conducting candidate reference checks

2)supporting employee relations initiatives, assisting with employee conflict resolution and daily communication between the HR department and the organisation's various teams

3)assisting in the preparation of HR documents, such as employment contracts, HR policies and employee handbooks

4)collating and updating new employee records

5)maintaining employee records and ensuring data is accurate and up to date

6)supporting the HR department in administrative tasks, such as employee data entry and data filing

7)assisting with payroll preparation by tracking relevant employee data, such as performance reviews and feedback

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn