We are looking for a Mechanical Engineerto assist in site supervision and coordination of ACMV systems for a construction project. Key duties include overseeing project execution, managing progress, coordinating with stakeholders, and ensuring quality control.

Responsibilities:

• Assist in ACMV system installation and commissioning.
• Coordinate project planning, materials, and manpower.
• Supervise subcontractors and monitor work progress.
• Conduct site inspections and ensure compliance with standards.
• Prepare reports and documentation as required.

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent.
• 1-5 years of relevant experience in construction projects (ACMV systems preferred).
• Good communication skills and project management knowledge.
• Experience in wafer fabs or pharmaceuticals is a plus.

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. It performs translational research that covers the energy value chain from generation to innovative end-use solutions, motivated by industrialisation and deployment.

In 2021, Enterprise Singapore, the national standards body for Singapore, had appointed ERI@N as a Standards Development Organisation (SDO) to develop and promote standards under the Electrical and Electronic Standards Committee. This includes standards supporting emerging areas such as renewables -offshore wind/marine & solar energy, secondary batteries and cells, solid state transformers, electrical energy storage systems, and smart grids. We also work with regulators and the industry on standards for electrical installations, building & services and safety and effectiveness of electrical products and services.

We are looking for a passionate Project Manager to support the work of the SDO.

Core expertise:

Project management responsibilities include managing the identification, development and promotion of standards meeting key requirements set by Enterprise Singapore (EnterpriseSG). These include supporting standards committees under the management of ERI@N in their standard development and promotion work to ensure timely and successful delivery of new and reviewed standards. The PM should have a background in business skills, project management, budgeting, analysis and stakeholder management. Familiarity with key technologies such as power systems, electronics, solar PV, battery systems and electrification as well as understanding of commercialization is an advantage.The PM must be detail oriented, able to multitask and demonstrate the ability to be intervene decisively and proactively.

Key Responsibilities:

Standards development

• Support standards committees to identify key areas for standards development from FY 2024 to FY 2026 which includes meetings with key stakeholders and preparing new work proposals.
• Support standards committees to develop standards within the timelines and quality requirements set by EnterpriseSG and the industry. These will include managing the preparations for meetings, capturing key comments, discussions and edits, conducting public consultations, addressing public comments, preparing draft standards for publications.
• Support the standards committee leaders in managing key stakeholders within the committee and industry with aim to build consensus and address standards implementation issues.
• Support participation of standards partners in international standardization including balloting, international meetings and hosting ISO/IEC TC meetings in Singapore.

Standards promotion

• Work with standards committees and EnterpriseSG to plan and execute standards promotions events targeting key stakeholders such as industry, government agencies and regulators, research bodies and the public. This could include standards launches, case studies, seminars and workshops. The PM is also expected to develop suitable presentation materials for these events.
• Work with standards committees and EnterpriseSG on verification studies to quantitatively evaluate the adoption of standards by key stakeholders.

SDO administration

• Assist Head, SDO and colleagues to manage the SDO budget to ensure budget marksmanship are met.
• Ensure procurement guidelines for EnterpriseSG and NTU are complied with.
• Assist Head, SDO in preparation of SDO progress reports to EnterpriseSG, the Singapore Standards Council and ERI@N management.
• Assist Head, SDO in audits concerning the operations and financial issues of the SDO.

Job Requirements:

Competencies and Qualifications

• Bachelor’s Degree in Electrical Engineering/ Computer Science / Mathematics/ Physics
• Min. Years of Experience: 3 years for project manager.
• Entry level candidates are welcomed to apply but will receive title of Project Officer.
• Certified Project Management Professional (PMP) will be an advantage
• Working Knowledge in Agile Project Delivery
• Working Knowledge in Microsoft Project, Excel, Word, Power point, SharePoint
• Experience within the utility or energy and power system industry is a strong advantage
• Excellent Stakeholder management

Added advantage:

• Experience in adopting or implementing standards
• Experience in Interactive Project Management tools like Click up, JIRA.
• Experience in document management tools like SharePoint
• Experience in R&D cross-functional New Product/Technology Introduction (NPI/NTI) programs & commercialization

Other Requirements:

• Excellent written and verbal communication skills
• An effective and efficient team player with good attitude and interpersonal skills
• Self-motivated for documentation maintenance and management

We regret that only shortlisted candidates will be notified.

Chemical Process Engineer (Chemical Engineering / Operations)

• Tuas (Company Transport / Transport Allowance if candidate travel to work by themselves (S$120)
• 5 Days work per week (Mon to Fri 8am to 5pm)
• Basic: $3800 to $4300 + site allowances
• At least a Bachelor in Chemical Engineering + Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Career Progression Opportunities

Job scope

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turnkey manager to plan and execute plant shutdown

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

This position focuses on strategy and modeling creation, improving global standardizations, enable sustainability through automation, synchronizing the processes and scaling the solutions to transform the inline interdiction and operation system automation for RAM Quality and Operation Engineering sections.

Responsibilities:

• Establish and improve BKM (Best Known Method) for RAM quality defense line, sampling methodology, sampling systems and operation efficiency.
• Improve quality and yield performance by reducing defect OOC% variation.
• Keen to learn new skills, initiate proactive and continuous improvement projects, in areas across the Front-End including manufacturing methods and processes, quality, software systems, cycle time, key tool metrics (utilization, and performance efficiency), maintenance and routine tasks, and other manufacturing support operation.
• Establish metrics that can efficiently audit adoption rate and compliance to business process, BKM and strategy and perform audits.
• Perform quality deviation investigations, fab metrics benchmarking analysis and find opportunity for improvements.
• Lead and facilitate discussion to drive network alignment on strategy business process and roadmap to achieve area objectives and deliver to timelines/commitments. Ensure BKM sharing spans across all sites regardless of technology and/or site mission differences.
• Actively provide recommendations to improve and optimize programs and processes to the respective program and/or process owners.
• Provide tactical support and coordination for the Fabs for issues of People, Safety, Yield, Quality, Cost, and Cycle Time when required.

Qualifications & Skills:

• Good communication skill, maintain a strong and open relationship with peer group and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management and present strategy and updates to network members and leaders.
• Proficient in project management with good resource planning, status monitoring and deliver timely results.
• Promote worldwide sharing and transfer of area-specific knowledge.
• Proficiency, experience, and knowledge relating to product and test wafer capacity modeling, wafer at risk modeling, Failure Mode Effect Analysis (FMEA) concept and system, defect analysis tools, sampling strategy and systems, Statistical Process Control (SPC) tools, Cycle Time Management, tableau creation, SQL and Programming language and Organizational Change have advantage.

Education and Experience:

• Masters/bachelor’s in engineering
• Relevant working experiences in RDA and/or Metrology
• Willing and capable of international travel, including Extended International Business Travel (EIBT) assignment to 6 months as needed, to accomplish the goals.

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Availability: Immediate

JOB REQUIREMENTS

1. Strong Accounts background
2. Able to work independently
3. Good communication skill
4. Deligent and meticulous

JOB DESCRIPTION

Accounts Payable

• Monitor and ensure data of inventories/ invoices/ vendor particulars are input into the Accounting System.
• Ensure all documentations are well received, invoices tally with delivery orders and ensuring payment are promptly issued within credit term.
• Generating of payment vouchers and issuance of cheques.
• Ensure payment are immediately entered into the Accounting System upon payment.
• Proper filing and book keeping.

Accounts Receivable

• Generating invoices accordingly to certified payment.
• Follow up on accounts receivable with relevant clients.
• Ensure timely collection of payment.
• Keeping proper documentations and paper trail regarding related AR matters.

Monitoring of Project

• Generate weekly (WIP) Work-in-progress report to reflect revenue, COGS, labour costs and other operating expenses to derive the profitability of the week.
• Ensure timely and justifiable certification of payment are provided by Clients.
• Keep track of progress claim status and Accounts Receivable.

Finalization of Project

• Generate report to reflect the statistics of man-hours/ COGS/ operating expenses and update to system for future reference.
• Finalize payment and keep track of retention amount and time frame.
• Final settlement of payment and record project reference into “Completed projects”.

Administrative Duties/ Others

• Generating of invoices, payment vouchers and other related documents.
• Ensure neat and tidy book keeping.
• Assist with issuance of wages to workers and breaking down into the appropriate monetary denominations.
• Fulfil any other ad-hoc duties as and when assigned by Superior/ Management.
• Reimbursement to employees / Petty cash.
• Generate weekly reports for Management review. (Progress Claim status, WIP and Accounts Receivable)
• Handle GST quarterly report and filing, Form C-S/C submission.
• Liaise with auditors for statutory reporting and compliance.

Office Location:

• Algas - Blk 5042 Ang Mo Kio Industrial Park 2, #01-515- S(569545)
• Valcan - 6 Ubi Road 1, Wintech Centre, #08-14, S(408726)

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Job Description

This role is an excellent opportunity for those looking to gain valuable experience and establish a strong footing in the aviation industry. You will be involved in a variety of tasks, including service delivery, data analysis, continuous improvement and resource management. You will collaborate with internal and external stakeholders, manage resources and assets, explore innovative technologies, and monitor and control costs, all while maintaining a keen understanding of business financials.

RESPONSIBILITIES

Assisting Administrative Officer, Component Services (Reliability & Modification Management) in the following duties:-

• Assisting Administrative Officer (AO) in the monitoring and tracking of off-wing rotables modifications for SIAEC’s Inventory Technical Management (ITM) Customers together with internal stakeholders.
• Assisting AO in the monitoring and tracking of off-wing rotables inventory pool for compliance with Airworthiness Directives together with internal stakeholders.
• Assisting AO in the monitoring and tracking of seed units that have been taken from OEMs for modification programmes.
• Assisting AO in the extracting and reviewing of components’ removal data/shop finding for the monitoring of the components’ reliability performance.
• Preparing of ITM customers components’ reliability performance report to the for review.
• Coordinating with relevant internal stakeholders to attain and review removal data from ITM customers for the identification and management of potential rogue units.
• Compiling of data required for the analysis of the component reliability evaluations.
• Monitoring and managing of administrative matters for the team’s General Staffs (GS).
• Any other duties assigned by superiors.

REQUIREMENTS

• Diploma with minimum 3 years working experience preferred.
• Prior working experience within the aviation industry is advantageous but not necessary.
• Strong analytical and critical thinking skills, with the ability to integrate multiple ideas and information from across various fields.
• Experience with SAP, Data Visualization Tools and Process enhancement skills is an added advantage.
• Excellent communication and interpersonal skills.
• Ability to establish team effectiveness and manage partnerships to create a cooperative working environment which enables the achievement of goals.

SIAEC is proud to have received the 2024 'Gold Standard in Excellence in Talent Management & Acquisition Award' from the Singapore Human Resources Institute.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

We thank all candidates for your interest in SIA Engineering Company, and regret that only shortlisted candidates will be notified.

Requirements for Hiring Freshers or Candidates with 1 Year of Experience:

Educational Qualifications:

1. Bachelor's degree or diploma in Accounting, Finance, Business Administration, or a related field.

Skills:

1. Basic knowledge of accounting principles and financial regulations.
2. Proficiency in MS Office (Excel, Word) and familiarity with accounting software like QuickBooks or Tally.
3. Good analytical, problem-solving, and numerical skills.
4. Strong communication and interpersonal abilities.

Attitude and Soft Skills:

1. Willingness to learn and adapt to new systems.
2. Attention to detail and organizational abilities.

Optional Preferences:

1. Internship or coursework in construction finance/accounting is an advantage.
2. Certifications (e.g., ACCA Fundamentals, CAT) may be desirable but not mandatory.

Would you like sample job postings or a detailed hiring checklist?

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB

Job Description

• Reports directly to Operations Manager
• Daily manpower allocation for all disciplines
• Understanding of confirmed jobs

1. Planning for job execution
2. Organize meeting for manpower and materials take-off
3. Briefing of Job PIC and Team Members on work scopes
4. Cost control on manpower and materials; Project cost versus cost sheet budget
5. Capture and alert additional/variation order for Sales Department’s action

• Assist Commercial in Air Con, Ducting, Steel works and Carpentry quotations

1. Materials and labour estimate; engage the expertise/support of respective disciplines

• ·Monitoring Close-Out Report preparation for every completed projects

1. Editing of report (if applicable)

• ·Monitoring PTR submission for projects

1. Monitor PTR vs Project Schedule

• Site visit/inspection
• MSO approval
• Check Timesheets, Work Reports and Customer Survey Forms are in order before submission for Commercial Billing
• Workshop housekeeping
• Assist SCM in tools and machinery maintenance

1. Monitor Preventive Maintenance Routine (PMR) for tools and machineries

• PIC of Operations Department in the absence of Operations Manager
• In-line with OME’s direction and policies that include but not limited to:

1. Monitor Production Staffs’ discipline and working attitude
2. Propose initiatives to enhance productivity
3. Be tactful and innovative in dealing with internal and external customers
4. Ensure that safety is implemented at all times when working in workshop, shipyard or offshore
5. Comply with quality standards and requirements of OME at all times
6. Comply with protection of environment and health & safety policies of OME at all times
7. Adhere to ‘no wastage’ policy of OME in terms of material and manpower assignment.

• Any other duties assigned by the Management.

Requirements

• Diploma or Bachelor’s degree in Marine Engineering, or a related field.
• Proven experience in managing marine construction operations.
• Strong leadership and team management skills.
• Excellent understanding of vessel operations, maintenance, and budgeting.
• Familiarity with safety standards and regulations in the marine industry.
• Ability to innovate and adopt new technologies.
• Strong organizational and problem-solving skills.
• Effective communication and reporting abilities.

Responsibilities:

• Lead the design, execution and coordination of landscaping works
• Plan work schedules, manpower and equipment according to contract specifications.
• Prepare shop drawing, as-built drawing, etc.
• Attend and coordinate to clients’ requests, meetings and provide creative solutions for landscape issues.
• Conduct daily and monthly site assessments to inspect horticultural practices and landscape quality requirements.
• Prepare site reports/daily activities reports to detail observation and recommendations - to be submitted daily internally and monthly externally.
• Establish reporting norms for supervisor and gardeners to follow and to report site progress and issues.
• Enforce workplace safety and health regulations for landscape maintenance on site.
• Coach and guide gardeners on performance expectations and tackle landscape challenges.

Requirements:

• Diploma or Degree in Landscape Design / Landscape Architecture or related field with min 3 years experiences.
• Familiar with Microsoft Word, Excel and PowerPoint.
• Result-oriented personality with excellent interpersonal and communication skills.
• Problem solver and team player with a strong sense of urgency.

Candidate must possess at least Polytechnic Diploma, Bachelor's Degree/Post Graduate Diploma in Structural Engineering or equivalent.

At least 3 Year(s) of working experience in the related field is required for this position.

Specialized in Engineering / Design - Structural or equivalent.

Preparation of detailed drawings, shop drawings and as-built drawings

Prepare reports as per drawings.

Project Coordination

Other adhoc duties as and when directed.

Responsibilities for Safety supervisor

• Report project progress to superiors
• Develop a work schedule for workers
• Supervise all construction workers
• Be the liaison between construction workers and supervisors
• Solve disputes between workers
• Ensure that a project is safe to work
• Ensure that the project is staying on or under budget

Qualifications for Safety supervisor

• Ability to organize a work schedule
• Ability to solve disputes between workers
• Excellent communication skills
• Ability to negotiate
• Deep knowledge of the construction industry
• Ability to read construction drawings and blueprints
• Perform quality checks on construction equipment

The incumbent will be a key driver within the Enterprise Continuous Improvement Office (ECI). He/she will manage the Continuous Improvement programme through the implementation of initiatives and build a culture of continuous improvement. He/she will also design and implement strategy, work on process and change interventions and enable technology within the organisation.

Responsibilities

1. Manage CI programme through the facilitation and implementation of various initiatives;

2. Conduct internal and external benchmarking exercises to establish and institutionalise best practices and operating systems across Business Units;

3. Design and strengthen capability for continuous improvement in the organisation;

4. Promulgate continuous improvement mindsets and coordinate the coaching of change agents;

5. Refine and execute engagement plans and other change management activities;

6. Expand and sustain the performance management deployment to measure effectiveness of improvement processes, size up opportunity for improvement in productivity, cost management and growth by supporting data visualisation and data analysis;

7. Support the reporting of KPIs and project status and analysing the performance data to identify the required actions for improvement;

8. Assist to report CI progress in various forums;

Requirements

1. Bachelor Degree in Engineering or relevant quantitative disciplines

2. Minimum 2 years of relevant experience, ideally in MRO production facilities

3. Strong data analysis and data visualisation skills

4. Strong project management skills and demonstrated ability to drive change management and continuous improvements will be key to succeed in this role.

5. Effective collaboration, communication and stakeholders’ management skills, with a proven ability to influence and drive changes among operational and business stakeholders.

SIAEC is proud to have received the 2024 'Gold Standard in Excellence in Talent Management & Acquisition Award' from the Singapore Human Resources Institute.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Candidates are not required to pay SIA Engineering, any Agents, or Sub-Agents representing the organisation a recruitment fee or other fees relating to their application / employment.

• In charge of material takeoff, cost & estimate of all civil engineering/electrical & mechanical/landscaping projects
• Involved in tender preparation and participation
• Responsible for progress payments claims & other contractual matters
• Preparation and co-ordination of all correspondences with relevant parties and authorities
• Other adhoc duties assigned from time to time

Requirements

• Polytechnic Diploma/Degree qualifications in Civil/ Structural Engineering/Mechanical & Electrical Engineering or related discipline
• 3 years of experience in roles as QS
• Proficient in MS office & contract administration
• Must be meticulous with positive work attitude
• Good interpersonal, analytical and negotiation skills
• Knowledge of autocad 2D & 3D skills would be an added advantage
• Independent and a good team player

Candidate must possess at least Polytechnic Diploma, Bachelor's Degree/Post Graduate Diploma in Architecture or equivalent

At least 3 Year(s) of working experience in the related field is required for this position.

Preparation of detailed drawings, shop drawings and as-built drawings

Prepare reports as per drawings.

Project Coordination

Other adhoc duties as and when directed.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma in Engineering (Civil), mechanical & electrical or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): MS OFFICE, DRAWING INTERPRETATION
• Specialized in Engineering - Civil Construction/Structural/Mechanical/Electrical or equivalent.
• Plan, coordinate, supervise and manage the civil and structural or M&E projects.
• Coordinate and attend meetings with clients, consultants and sub contractors.
• To ensure and maintain high standard of work, safety and good work productivity.
• Other adhoc duties as and when directed

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

Overview

As a Site Coordinator, you will assist the Operation Manager in the daily operation of executing all project plans, project schedules, budgets and expenditures.

Job Description:

1) Assist in coordinating projects and ensure smooth progress of work.

2) Identify defects and follow up on quality assurance/quality control (QA/QC) issues.

3) Provide regular project management reports for Work in Progress (WIP) reviews.

4) Coordinate and manage vendor and subcontractor activities to ensure quality standards are met.

5) Conduct regular site visits and manage work schedules to ensure projects progress smoothly and are completed on time.

6) Submit weekly reports on Projects progress to management.

7) Manage changes to project scope, schedule, and budget, using proper verification methods.

8) Gather necessary resources and follow up on meetings to ensure the project schedule is met and expectations are achieved.

9) Improve work quality by providing feedback on issues identified during troubleshooting.

10) Work closely with HR & Admin Department on issuing of Delivery Order, Subcontractors Claim Form and Invoices.

11) Providing all administrative support when required.

Requirements:

1) Diploma in Electrical or Mechanical Engineering.

2) At least 3 years of experience in the Lift & Escalator industry.

3) Proficient in Microsoft Office (Word, Excel, PowerPoint).

4) Ability to work in a fast-paced environment and meet tight deadlines.

5) A team player with the ability to collaborate effectively with internal and external teams.

6) Possession of a personal vehicle is a plus.

Job Description:

• As a press brake operator, your job is to operate press brake machines to shape various types of metal
• Responsible for setting up, tool selection, operating of multi-axis CNC pressbrake/bending machine and input the programs as designed.
• Inspect blueprints for a project, set up your machine, perform regular maintenance, inspect metal while shaping it, and make adjustments as needed
• Maintain and manage machine as well as tooling cleanliness and in good physical shape
• Read tape measures and protractors, calipers, and other tools necessary to perform job
• Do other machine related tasks and other production jobs as and when required
• Maintain cleanlines of

Requirements:

· NITEC or any related field or related experience

· Computer literate, and familiar , solidworks , AutoCad ,

· Knowledge in the operation of CNC pressbrake machines like Amada, Bystronic Machine is an advantage

• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawing.
• Work with purchaser to source & make orders for all materials required and purchase the required materials according to project timeline.
• Supervise and monitor workers / welders on site for installation or maintenance.
• Attend site meetings with clients / architects and authorities on project technical matter.

Requirement:-

• Minimum Dipoma and Degree in Mechanical Engineering.
• Required skill(s) MS Office, MS project, Autocad.
• Has work experience in consruction sites and project management.
• Responsible, detail-oriented and able to multi task.
• proactive team player with the ability to work independently in challenging projects and timelines.
• Possess Class 3 driving license will be an advantage.

1. Lead and set a goal for sales and operation team

2. Set direction and guide the project team for all the project

3. Review value engineering and lean engineering

4. Liaising with main contractor, owner, stakeholder & consultant

5. Check and ensure the scope of work for all the fire protection system and services

6. Overseeing current project as well upcoming projects

7. Attend and conducting project review meeting with sales and operation team and attend client meeting

8. Ensure the project delivery as planned schedule and manage operational cost within the budget

9. Review and submit authority required documents

10. Monitor compliance of work with the workplace safety and health regulations

11. Maintain customer relationship

12. Other ad-hoc duties as assigned by managementCon

Job Description:

- Manage day-to-day operations of high-volume business.

- Provide hands-on support to team.

- Accountable for the delivery of product test data to achieve client satisfaction by maintaining production and specified turnaround targets.

- Reports turnaround times in monthly reports, manages to goal of 100% on time delivery.

- Monitors and reports weekly projection status.

- Lead team to a zero recordable and near-miss incident approach.

- Generates revenue by providing assistance to General Manager in managing the reservation system and procedures.

- Assists GM in budget and expense management by utilizing labor scheduling tools to follow demand patterns.

- Assist GM in managing staff by conducting staff meetings.

- Manages facilities by working closely.

Qualification:

- A minimum of 2-3 years prior leadership experience strongly preferred.

- A minimum of 2-4 years of prior experience in engineering, manufacturing industry.

- Minimum of a Bachelor's Degree in business administration or similar.

- Must be able to work OT.

- Good communication skills – Ability to read, analyze, and interpret legal documents (contracts, claims of lien),

general business periodicals, professional journals, technical procedures, or government regulations.

- Managing key business operations.

• Develop innovative and functional architectural designs for projects ranging from commercial to public spaces.
• Collaborate with clients and project stakeholders to understand design requirements and translate them into aesthetically pleasing and practical solutions.
• Ensure designs comply with local building codes, regulations, and industry standards.
• Prepare and deliver compelling presentations to communicate design concepts to clients, stakeholders, and project teams.
• Create visually appealing renderings and presentations using Rhino 3D.
• Generate detailed architectural drawings, plans, and documentation using industry-standard software and tools.
• Ensure accuracy and precision in all design documentation.

Rhino 3D Expertise:

• Demonstrate advanced proficiency in Rhino 3D software to create detailed and accurate 3D models.
• Utilize Rhino 3D/Grasshopper tools for modeling, rendering, and visualization to communicate design concepts effectively.
• Stay updated on the latest features and updates in Rhino 3D to maximize software capabilities.

Project Collaboration:

• Work closely with cross-functional teams, including architects, engineers, and project managers, to integrate design concepts into comprehensive project plans.
• Collaborate with colleagues to incorporate feedback and make necessary design adjustments.