Key Roles and Responsibilities

• Perform front end engineering design (FEED) and basic design for Process Design, Review and Engineering for centralised utility facilities, utility power and water, petrochemical industries and utility scale renewable projects.
• Develop P&ID, mass and heat balance, process flow diagram, operating/ control philosophy, overall supply scheme, layout, equipment specification, yield analysis etc.
• Develop and continually improve internal engineering best practices and procedures to provide engineering services of high quality in support of the various projects.
• Lead in process design and review inter-disciplines design/ engineering with consideration for safety, quality, performance, reliability, flexibility of operation with optimal project and life cycle cost.
• Conduct engineering activities during business or project development including but not limited to pre-feasibility/ feasibility studies, technical due diligence, cost estimation, site survey, technical proposal to customer, project / EPC scoping strategy, vendor selection and review, determine LCOE, budgetary quotation review and clarifications, and all related technical support and solutions etc.
• Evaluation of new technology and innovation solutions.
• Participate in engineering activities during project execution including but not limited to preparation of Scope of Work / Design Memorandum / Minimum Functional Specification, tender review on technical proposals and clarifications, attend site queries and site installation issues that related to design, pre-commissioning, testing and commissioning, PSSR etc.
• Participate in HAZOP, QRA, EIA studies.
• Review and approval of detailed design submitted by Contractors and ensure compliance with Standards and all the company best practices.
• Familiar with multiple energy resource simulation and and optimisation tools.
• Establish system and documentation for company engineering standards & specification, ITP, approved vendor/manufacturer list, material specifications, discipline’s schedule of rates and cost estimate template, engineering checklists etc.
• Ensure all activities carried out are in full compliance to all regulatory and authority requirement.
• Ensure engineering support is provided in a timely manner to all stakeholders through resource planning, close collaboration with discipline engineers and team members, contractor management, etc.
• Where applicable, provide training and guidance other team members.

Key Decisions & Dimensions

• All activities in full compliance to all legal / authority requirements.
• All projects (development and execution) are to be designed, executed and performed to a high quality at competitive costs, safely, within schedule, within budget and meet Sembcorp and industry quality requirement.
• All value engineering and strategic plans developed shall ensure Capex remain competitive, are sustainable and meet the company’s business and operational needs.
• All developed and accumulated knowledge / value must be systematically retained within company

Qualifications & Experience

• Bachelor’s Degree in chemical engineering, process design and engineering discipline or equivalent
• At least 10-15 years of experience in energy business related engineering management and project management (engineering and construction).
• Experience in power and water utilities as well as renewable energy projects is preferred.
• Good command of multiple energy resource simulation and optimisation tools is preferred.

Skills / Competencies & Preferred Characteristics

• Demonstrate critical thinking skill, positive attitude, teamwork, analytical, communication skill, leadership skill.
• Strong self-motivation and work ethic, flexible and thrives under pressure.

Job Description for Fire Protection Construction Project Engineer/Manager (Singapore)

Role Overview:
Manage fire protection system design, installation, and commissioning for projects in Singapore, ensuring compliance with local regulations, timely delivery, and quality standards.

Key Responsibilities:

1. Project Planning:Assess site requirements and define project scope.
   Prepare budgets, schedules, and obtain necessary approvals.
   
2. Design & Procurement:Review fire protection system designs to ensure compliance with SCDF and other regulations.
   Manage procurement of materials and vendor contracts.
   
3. Construction Management:Supervise installation works, resolve site issues, and ensure quality.
   Coordinate with MEP trades and enforce workplace safety standards.
   
4. Testing & Commissioning:Oversee testing of sprinklers, hydrants, alarms, and suppression systems.
   Rectify deficiencies and prepare all required certifications.
   
5. Handover:Conduct final inspections, obtain client sign-off, and deliver documentation.
   Address post-handover warranty issues as needed.
   

Requirement

• Experience in managing fire protection construction projects within Singapore.
• Knowledge of SCDF codes, NFPA standards, and BCA regulations.
• Strong leadership abilities, excellent communication, and project management skills.
• Determined and positive attitude.
• Fresh graduates are encouraged to apply.

Job duties:

• Dealing with robotics projects for automobiles
• Troubleshooting electrical and mechanical technical issues
• Conducting electrical assemblies, routing, and harnesses
• Implementing schematics diagram to install and fabricate electrical systems
• Understanding electrical systems and architecture for various forklift or related machines

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

• Analyse and clarify RFQs (Request for Quotation) or opportunities during pre-tender and tender phase and to raise queries or amendments in order to influence clients or consultants if possible.
• Go for site show round to understand the scope of work and prepare MOM for Tender scope.
• Lead and organize single or multi systems like mechanical, electrical and ELV tender preparation, reviews and submission in order to ensure completeness, quality, technical and risk compliance, and on time tender submission.
• Consolidate and analyse technical, bill of quantities, price schedules, cost/quotes, financial data and commercial contract in order to ensure technical compliance, risks mitigation and competitiveness during tender preparation and clarification phase.
• Arrange project involvement during Tender stage and manpower planning with project to come up with project organization chart and preliminary cost.
• Enhance and consolidate quotes in order to reach target win price while avoiding rejection and margin slippage and to prepare Tender cost summary for management approval for tender profit margin.
• Prepare tender interview presentation to support management during tender clarification / negotiation phase in order to win tender.
• Lead and organize tender reviews and meetings in order to ensure completeness and quality handover to project management team.
• Perform any other related duties assigned in order to support management.
• Degree in Electrical Engineering or a related field.
• Minimum 5 years’ experience in tender management role (construction industry – electrical for building).
• Knowledge in HT LV, ELV systems, and ACMV / Fire systems is an advantage.
• Class 3 license must

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of experience with Advantest 93000/Teradyne J750.
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Duties and Responsibilities

- Document Control which align with Change Management procedure as require upon receive specs from customer.

- Proper Document Control with Cosmetic stamped for all new drawing from sales

- Log in all RFQ from Sales into Engineering RFQ folder

- Handle order processing. Put up job sheet and pull out the correct drawing revision from server.

- Any ad-hoc duties as assigned by immediate manager.

- Supporting in Quality MRB meeting and update disposition into new routing accordingly.

- Supporting new products' manufacturing studies and develop process control specifications.

- Supporting Efficient & Effective process engineering planning (Process Routing) base on costing estimation request.

- Planned and maintaining process routing in ERP system whenever there is repeated work order launched.

Job Requirement

- Minimum O-Level requirement

- Fresh graduate are welcome

- Possess good written and communication skills.

- Proficient in MS Excel, PowerPoint, etc.

- Knowledge in using MRP/ERP system is an advantage.

- Ability to maintain a positive attitude at all time.

Job Responsibilities:

• To be involved in the planning and execution of civil and structural engineering works.
• Assist Management in monitoring and managing the day-to-day operation of the projects.
• To prepare method of statement, construction sequencing, sketches, and other technical submissions.
• To monitor the execution of the site works. To review and further develop the method and/or sequence of the works to ensure safety and efficiency.
• To assist in the preparation of RA/SWP and other safety documents.
• To collaborate with peers, and to liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare Inspection and Test Plan, and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification and submit technical clarification to the clients and consultants. Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Prepare site record and submit to office in a timely manner.
• Undertake ad-hoc duties as assigned by the management.

Requirements:

• Candidate must possess at least a bachelor’s degree in engineering (Civil) or equivalent from a recognized University accredited with the Professional Engineers Board, Singapore.
• Preferably with design, consulting experience and Improvement works to Surface Car Parks.
• Conversant with Eurocode or Local codes and regulations as well as submission procedures.
• Well knowledge in CAD, BIM and other Civil Engineering software is necessary.
• Good project management and ability to work independently and under pressure to meet tight schedules.
• Proficient in MS office applications and keen to learn new things.
• Good communication skills and able to interact with people of all levels and teamwork.
• Candidates with more years of experience may be considered for a senior role.

Our client provides mechanical and electrical solutions.

• Purchase material for project site based on the product specification and requirements.
• Conduct price negotiation with suppliers, vendors and price comparison.
• Create purchase order and generate monthly purchase reports.

Requirements:

• Certificate in Purchasing or equivalent.
• At least 2 years of purchasing experience in Construction/Engineering industry.
• Proficient in Microsoft Office, meticulous and good negotiation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of experience with Advantest 93000/Teradyne J750.
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Overview:

As an AI Engineering Specialist, you will play a critical role in developing and integrating advanced AI models into Alphatok's production systems, including our flagship CRM and ERP software. You will work closely with our engineering team, contributing to Alphatok’s vision of providing AI-powered solutions to businesses in diverse sectors. Reporting to the Chief Technology Officer (CTO), this role offers you the chance to develop scalable AI solutions while working in a fast-paced, dynamic startup environment.

Key Responsibilities:

• Write clean, efficient, and maintainable code to develop AI solutions for Alphatok's B2B software products.
• Collaborate with data engineers to ensure robust data pipelines and accurate data integration.
• Implement and optimize AI models in real-time production environments.
• Leverage Retrieval Augmented Generation (RAG) and other advanced AI techniques to improve user interaction and software functionalities.
• Experiment with AI methods such as natural language processing (NLP), knowledge graphs, and neural networks to enhance Alphatok’s software capabilities.
• Work closely with cross-functional teams, including project managers, data scientists, and product developers, to meet client requirements and deliver AI-driven solutions.
• Stay updated on the latest AI and machine learning trends to ensure Alphatok’s products remain industry-leading.
• Participate in the agile software development process, contributing to sprint planning, daily stand-ups, and code reviews.
• Develop and maintain comprehensive documentation for AI models, processes, and methodologies.
• Integrate AI-based automation and intelligent features into Alphatok's CRM and ERP systems to improve user efficiency and client satisfaction.

Required Qualifications:

• Bachelor’s degree in Computer Science, Mathematics, Data Science, or a related field.
• Minimum of 2+ years of experience in AI engineering, with a focus on AI model development and integration.
• Proficient in Python and familiar with AI frameworks like TensorFlow or PyTorch.
• Experience in building scalable AI systems using modern cloud platforms such as AWS, Google Cloud, or Azure.
• Familiar with machine learning concepts, including optimization algorithms, evaluation metrics, and neural networks.
• Knowledge of DevOps and experience with CI/CD pipelines, version control (e.g., Git), and testing methodologies.
• Experience in working with RESTful APIs and data pipeline integration.
• Strong problem-solving skills, with the ability to work independently and adapt quickly to new technologies.

Preferred Qualifications:

• Experience with Retrieval Augmented Generation (RAG) and other prompt engineering techniques.
• Knowledge of multi-user collaborative design systems and AI-driven project management.
• Experience with Docker for building, deploying, and managing containers in production environments.
• Familiarity with frontend and backend development (e.g., Node.js, TypeScript, C#, or Java).
• Experience working with B2B software systems like ERP and CRM in a cloud-based architecture.

Position Title: Civil Engineering Site Surveyor
Vacancies: 1
Salary Range: SGD 3000-4000/month

Job Requirements:

• Experience: At least 1 year of relevant work experience;
• Language Skills: Proficiency in Chinese communication;
• Other Skills: Familiarity with survey equipment (e.g., total station, GPS), and proficiency in survey software (e.g., AutoCAD, Civil 3D).

Job Responsibilities:

• Conduct site surveys and measurements as per project requirements;
• Prepare and review survey reports, drawings, and documentation;
• Collaborate with the engineering team to ensure accuracy in design and construction processes;
• Maintain and ensure proper use of survey equipment.

Work Location:
229 Mountbatten Road #02-05 Mountbatten Square Singapore (398007)

Site

Benefits:

• Medical insurance;
• Paid annual leave;
• Year-end bonus.

Application Method:
Interested candidates, please send your resume to [email protected], indicating the position applied for.

招聘广告

职位名称: 土木工程测量员
招聘人数: 1名
薪资范围: 3000-4000元/月

职位要求：

• 经验要求： 一年以上相关工作经验；
• 语言能力： 需具备中文沟通能力；
• 其他技能： 熟悉测量设备（如全站仪、GPS等），并能熟练使用测量软件（如AutoCAD、Civil 3D）。

岗位职责：

• 根据项目需求进行现场测量和数据采集；
• 编制和审核测量报告、图纸及相关文件；
• 与工程团队合作，确保设计和施工过程中数据的准确性；
• 维护和确保测量设备的正常使用。

工作地点：
229 MOUNTBATTEN ROAD #02-05 MOUNTBATTEN SQUARE SINGAPORE (398007)

福利待遇：

• 医疗保险
• 带薪年假
• 年终奖金

申请方式：
有意者请将简历发送至 [email protected]，并注明申请职位。

Job Description

What are we looking for? We are looking for an Engineering Lead to join the Platform Product Integrations team to expand and maintain direct integrations with payments systems and partners all over the world.

What is the Platform Product Integrations (PPI) team? The Platform Product Integrations team sits within our Platform tribe, which designs, builds and operates the foundational direct integration infrastructure that power the product that moves billions of dollars every month.

In Wise, our Platform Engineering Lead position is responsible for leading a specific domain from roadmap through to operation, as well as the people side of the team.

Here’s how you’ll be contributing to the Team

• Design, implement and maintain integrations between Wise and complex financial systems.
• Develop and design scalable and repeatable architecture with complex regulatory requirements.
• Analyse infrastructure to determine inefficiencies and problems, and create automation and optimisation.
• Collaborate with our larger platform engineering team and alongside product engineering on globally impactful projects.
• Communicate with various stakeholders throughout Wise, plan roadmaps with your team, and work through challenges to determine scope and realistic delivery.
• Work with other Leads to influence the direction and change current technology implementations, as well as advocate for excellence with third parties.
• Leadership & Team Management:
  Lead, mentor, and manage a high performing engineering team, fostering a culture of collaboration, continuous learning, and innovation.
  Set clear goals, provide regular feedback, and support professional development for team members.
  Collaborate with cross-functional teams to align technical initiatives with business goals.
• Infrastructure & Systems Management:
  Oversee the design, implementation, and maintenance of robust, scalable, and secure systems and network infrastructures.
  Ensure high availability and performance of critical systems, both on-premise and in AWS.
  Develop and enforce best practices for system administration, monitoring, and disaster recovery.
• AWS & Cloud Technologies:
  Drive cloud adoption and optimization strategies, leveraging AWS services to enhance system performance, scalability, and cost-efficiency.
  Lead the migration and management of applications and services within the AWS environment.
  Ensure compliance with security and regulatory requirements in the cloud.
• Network Engineering:
  Oversee the architecture and management of enterprise networks, including LAN, WAN, and cloud-based networking solutions.
  Implement and manage network security measures, such as firewalls, VPNs, and intrusion detection systems.
  Ensure reliable connectivity and uptime across all network components.
• Strategic Planning & Innovation:
  Work closely with senior leadership to develop and execute the infrastructure strategy.
  Stay current with emerging technologies and industry trends, recommending and implementing new tools and technologies as appropriate.
  Lead initiatives to automate processes, improve system efficiency, and reduce operational costs.

This role will give you the opportunity to:

• Work in a modern, cloud heavy environment where remote connectivity is a staple of our tech ecosystem
• Choose your path to impact. We believe people and teams are most empowered when they can act autonomously. So rather than telling you what to do, you’ll work with your team to create a vision of your own. Of course, you can always gather feedback from smart, curious people across Wise but you’ll have the freedom to make your own calls
• You’ll be offered the flexibility to decide on how and where you work. We understand everyone needs a little something different, so we’ll do our best to make it happen.
• Approach new challenges with the freedom to develop novel and customised solutions
• You’ll get to inspire teams with your ideas, knowledge and self-starter attitude.
• Grow as a lead and engineer - understand what problems the business needs to solve and why, then proactively resolve them. We shy away from micro management
• Be part of our mission to make money without borders the new normal

Qualifications

A bit about you:

• Previous experience leading and managing teams (3-8+ team size) in a fast moving, dynamic environment - From Connect
• Experience in designing and deploying complex infrastructure on cloud and on-prem. - From SYS
• Experience in making complex deployments repeatable using modern Infrastructure as Code principles and scripting. - From SYS
• Applying software development principles to infrastructure design and deployment - From SYS & NW
• Ability translating business requirements into explainable technical solutions for internal and external stakeholders - From SYS & NW
• Experience in leading and managing technical projects
• Experience with complex deployments (e.g., configuring firewalls, IPsec, GRE, security policies, network ACLs, BGP routing, and troubleshooting complex networks)
• Passion for automation, building and testing the tooling needed to build better products

The following is a list of some of the technologies and vendors we use. It is not an exclusive list nor do we expect you to know everything. But it gives a flavour.

• System and Network Architecture and design principles and best practices
• Java Microservices on Kubernetes (Software development experience is desirable but not essential) - SYS
• AWS Networking: VPC, VGW, Transit-GW, Direct-Connect, VPC Peering - SYS & NW
• ELK, Prometheus - SYS
• Terraform - SYS
• CM tools (e.g: Ansible, Puppet) - SYS
• AWX
• Git, with Github - SYS & NW
• VPNs (we use IPSec heavily) - From NW
• Network routing/switching experience on different vendor OS (Cisco, Juniper, Check Point)
• ISP Peering, DataCenter integrations, cross-connects - From NW

More about you:

• You’re a self starter who can run with projects
• Reliability and scalability are paramount in your solutions
• You recognize the importance of both customer-focus and strong technical skills and can coach other engineers on both
• You're comfortable and confident providing input to other teams' priorities
• Security and privacy by design mindset
• You think about risks and compliance
• You enjoy looking for where you can have impact and upset the norm
• Technical influencer capable of promoting architectural patterns to internal and external stakeholders
• You are comfortable facing new challenges and creating novel and customised solutions
• You’re collaborative, charismatic and have the ability to tailor communication to the audience - both to technical and non-technical people as needed. Effective communication between cross-team stakeholders, peers and leads is key

Additional Information

Salary Range: SGD 168,000 - 210,000 Annually + RSUs + Benefits

For everyone, everywhere. We're people building money without borders — without judgement or prejudice, too. We believe teams are strongest when they are diverse, equitable and inclusive.

We’re proud to have a truly international team, and we celebrate our differences.

Every Wiser should feel that they can be themselves at work.

Inclusive teams help us live our values and make sure every Wiser feels respected, empowered to share their contributions towards mission zero and able to progress in their careers.

Having diverse teams that reflect our diverse customer base helps us build a better product. We can be more creative and empathetic to our customer’s needs and make sure we leave no-one behind on our journey to mission-zero.

For everyone, everywhere. We're people building money without borders — without judgement or prejudice, too. We believe teams are strongest when they are diverse, equitable and inclusive.

We're proud to have a truly international team, and we celebrate our differences.
Inclusive teams help us live our values and make sure every Wiser feels respected, empowered to contribute towards our mission and able to progress in their careers.

If you want to find out more about what it's like to work at Wise visit Wise.Jobs.

We are currently looking for an Utilities Engineer who will ensure the facility, equipment and systems are maintained in accordance with the detailed design and that GMP qualification is achieved and complied.

Your day to day role would involve the following:

• Lead continuous improvement for Utilities system operations and maintenance
• Submit relevant reports and provide updates
• Liaise with Contractors and workmen to ensure proper work procedures adhere to local authorities' regulations and act
• Lead/ Support deviation investigation
• Lead/Support Site Sustainability program
• Complying to cGMP/International standards

We would like to hear from candidates who have:

• Degree holders in Engineering, Mechanical, Electrical, or Chemical
• Applicants with GMP knowledge/experience will be prioritized
• Familiar with documentation in a highly regulated environment

Your Team, Your Impact

Marvell is empowering the global data economy. Whether at the network core or edge, our leadership technologies make it possible for the world’s data to be processed, moved, stored and secured faster and more reliably. With leading intellectual property and deep system-level knowledge, Marvell's infrastructure semiconductor solutions are transforming the 5G, cloud computing, enterprise and automotive markets of tomorrow.

What You Can Expect

• Support new product introduction initial phase to validate new device features and test/DFT methodologies.
• Perform new device characterization, circuit sensitivity analysis, interpret findings & support root-cause investigations.
• Perform data mining and statistical data analysis on wafer sort and final test parametric to support initial product assessment.
• Support product assessment report generation.
• Perform functional testing and analysis to ensure product operation and reliability.
• Support & resolve Test engineering & program related issues.
• Support volume Engineering sample supply for early customer engagement.
• Plan and coordinate (data analysis, debug, root-cause, implementing solutions) yield & test time improvement activities to meet the set mass production release goals.
• Provide customer return verification support including implement containment & preventive actions
• Execute and implement test productivity activities which include test time reduction, retest reduction, test insertion removal, higher parallelism
• Transfer product knowledge to sustaining engineer
• Engage & manage Test Subcon in early production stage

What We're Looking For

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and 5-10 years of related professional experience.
• Master’s degree and/or PhD in Computer Science, Electrical Engineering or related fields with 3-5 years of experience.

Responsibilities

• Plan, implement and organize customer visit/meeting to close new sales to achieve sales target
• Develop and maintain strong business relationship with existing/new customers
• Develop sales and marketing strategies with action plan to penetrate into new markets
• Source and develop new customer accounts and expand business opportunities
• Analyze market trends, competitor offerings and keep abreast of latest market development
• Preparation of proposals, tenders and quotations based on project requirements and close monitoring of project execution to optimize profitability and maximize customer satisfaction.
• Able to market company portfolio to potential customers
• Able to identify, plan and execute new projects
• Able to interact well with all levels of our customer’s organization structure to ensure projects are being carried out on schedule
• Achieve sales revenue, profitability and sales growth targets set by the Management
• Perform any other ad hoc duties as assigned

Requirements

• Degree/Diploma in Engineering or equivalent.
• Minimum 3-5 years of M&E working experience in building/construction industry
• Must be bilingual abilities with strong skills in multiple languages to liaise with relevant counterparts
• Excellent written and verbal communication skills, with a high level of attention to detail.
• Strong interpersonal skills, ability to develop relationships and communicate with all levels of management.
• Good in documentation, presentation, coordination, and analytical skills
• Proficient in Microsoft Office applications
• Possess own vehicle would be an added advantage
• Willing to travel to various job sites

Job duties:

• Dealing with robotics projects for automobiles
• Troubleshooting electrical and mechanical technical issues
• Conducting electrical assemblies, routing, and harnesses
• Implementing schematics diagram to install and fabricate electrical systems
• Understanding electrical systems and architecture for various forklift or related machines

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Responsibilities

· Assist Test Engineers in leading and supporting Test Technicians for all test-related activities for Server & Rack products in production.

· Support PXE Server configuration and basic troubleshooting for test processes.

· Perform and maintain the server run-in, burn-in, and power test processes under the guidance of Test Engineers.

· Test, analyze, and perform preliminary troubleshooting of production failures; escalate unresolved issues to Test Engineers.

· Liaise with Test Engineers to implement and maintain test programs and configurations.

· Participate in Kaizen and continuous improvement activities to enhance processes and efficiency.

· Update and maintain test records and documentation, including Working Instructions and master lists.

· Provide basic training and mentoring to Test Technicians on test procedures and troubleshooting techniques.

· Support New Product Introduction (NPI) processes and assist in production ramp-up.

· Participate in ISO-related activities (implementation and maintenance).

Requirements

· Diploma in Engineering / Nitec with 2–4 years of relevant experience in testing and debugging in a manufacturing environment.

· Good understanding of test methods, processes, and concepts.

· Basic knowledge of programming and debugging skills.

· Ability to collaborate effectively with peers, engineers, and supervisors.

· Strong organizational skills and the ability to multitask under pressure.

· Willingness to perform shift work as required.

· Proactive mindset and willingness to learn and support continuous improvements.

Compliance with RBA standards

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of experience with Advantest 93000/Teradyne J750.
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Support projects from the Mechanical Engineering/Design perspective of Buildings (Commercial/Residential) from initial scoping through detailed design, commissioning, and final handover, including preparing technical specifications, reports, and cost estimates.
• Collaborate with respective departments to develop client proposals and tenders, aiming to achieve profitable business outcomes.
• This involves bid planning, facilitation, cost estimation, writing, technical input, and necessary approvals.
• Foster strong client relationships by contributing to client plans and maintaining a positive rapport

Requirements

• Bachelor's Degree in Mechanical with a minimal of 1-3 years of prior functional experience with Engineering Consultants, Design Practices or Professional Services
• Buildings (Commercial/Residential)
• Good knowledge of working drawings and construction practices
• Conversant with local codes & regulations
• Competency in authority requirements and submission procedures

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Dickson KOH | Managing Partner
Head, Infrastructures Practice
EA Registration R1103367

• Manage and grow existing accounts to ensure continuous growth
• Expand market share with existing and new customers
• Willingness to meet clients on-site to understand their needs, provide hands-on demonstrations, and establish a personal connection to build trust.
• Preparation of quotations
• Assiat in stock take and stand by delivery.
• Assist site project and oversea on site if needed.
• To develop strategy in order to meet sales target
• Required valves assemble if needed.

Requirements:

• Diploma/Degree in Electrical / Electronic / Mechanical Engineering, or relevant education.
• Prefer 2 years experience in related industry.
• Possess Class 3 license with own vehicle

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

EA License No: 20C0270

EA Personnel No: R22110981

EA Personnel Name: Law Mei Fong

We are an electrical consultancy company dealing with consultancy, design, licensing, vetting of design, inspection of electrical installation works, including high voltage electrical installation, lightning protection system, general lighting and power system for industrial, commercial, residential electrical installations. We have professional electrical engineer and licensed electrical engineer to provide guideances for new staff. We are looking for applicants who graduate in electrical engineering from ITE, Polytechnics, University, with or without experiences. Starting salary will be $2,000 to $5,000 per month depening on paper qualifications and year of experiences. We offer 5 days' work per week. If you are required to work overtime, or on Saturday/Sunday, time off will be given. We look forward to receiving your job applications

Job duties:

• Dealing with robotics projects for automobiles
• Troubleshooting electrical and mechanical technical issues
• Conducting electrical assemblies, routing, and harnesses
• Implementing schematics diagram to install and fabricate electrical systems
• Understanding electrical systems and architecture for various forklift or related machines

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Job Scope:

• Plan, coordinate, and oversee engineering projects from inception to completion
• Collaborate with stakeholders, including clients, architects, and contractors
• Develop project schedules, budgets, and resource allocations
• Conduct feasibility studies and risk assessments
• Prepare and review technical documentation, reports, and specifications
• Monitor project progress and ensure compliance with quality and safety standards
• Troubleshoot issues and implement solutions to keep projects on track
• Facilitate communication between teams and manage project meetings
• Ensure adherence to project timelines and budgets
• Provide technical support and guidance to project teams

Requirements:

• Degree or Diploma in Civil/Structural Engineering
• Minimum 2 years of experience in structural steelwork
• Assist the Project Manager with project scheduling, site coordination, and submissions of method statements and risk assessments

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Providing secretarial and admin support to the Directors and team
• Manage and ensure all matters are redirected to the relevant parties with discretion and attended to meticulously
• Managing schedules and provide admin support to the team (make appointments, schedule meetings, travel/hotel arrangements)
• Managing incoming & outgoing telephone calls, messages and electronic mails.
• Seeing to office guests
• Preparing meeting agenda, minutes of meetings, transcribing dictation
• Handling and distributing all incoming & outgoing correspondences and faxes
• Assist with the preparation of presentation materials, bid documents and fee proposals
• Assist in the preparation of all documents & correspondences, such as letters, reports, tender, specifications, submission proposals faxes, emails, etc.
• Assist in liaising and coordinating all activities and work with the overseas offices
• Handle all information with discretion and strict confidentiality
• Update and upkeep contact lists
• Process claims and timesheets
• Assist to monitor and track status of projects
• Work closely and coordinate with corporate services and other engineering departments

Requirements:

• Candidate must possess at least Diploma in Business Studies/Administration/Management or equivalent
• At least 3 years of working experience in similar field, preferably in built environment industry
• Highly proficient in Microsoft Office (Word, Excel, PowerPoint, Outlook)
• Experience with preparing tender documents, specifications and contracts will be an added advantage
• Must be comfortable dealing with expats and people of different nationalities
• Ability to work in fast-paced environment and under tight deadlines
• Must be pro-active, take initiative without waiting for instructions
• Able to multi-task and handle urgent requests
• Must be able to work overtime and weekends when required

Engineering Technician EIC

Location: Pioneer, Singapore

Reporting to: Site Engineering Manager

As the Engineer Technician, you will carry out maintenance, troubleshooting and/or improvement activities to the Electrical system, Instrumentation and Control (Automation) to ensure optimum uptime of the equipment and plant.

Main Responsibilities:

• Execute troubleshooting corrective and preventive maintenance work for related equipment in a timely, cost effective and safe manner and to minimize production down time.

• Instrumentation, transmitters / switches / detectors, control panels, PLCs and SCADA
• Electrical, earthing, motor, motor control centres, variable frequency drive
• Access and troubleshoot of PLC program logics

• Identify and prioritize the production criticality and equipment availability
• Work with engineer to setup maintenance plan (preventive and predictive) and vendor service agreement
• Identify, estimate and plan the resources (manpower, material and time) required for forthcoming / planned maintenance tasks • Work with engineer to carry out improvement and monitor performance of equipment for optimization of equipment functionality
• Liaise and coordinate with vendors/contractors for equipment maintenance and repairs
• Support and attend to daily ad hoc request with regards to maintenance and improvement works
• Keep track of equipment spares and work with maintenance planner to replenish the spares upon depletion
• Support to develop Preventive Maintenance SOP/Procedures and tasks to maintain plant assets.
• Attend to off-office hour call back by user to repair equipment breakdown
• Plan, organize and supervise work performed by in-house contractor and external contractor engaged for maintenance work.
• Learn safety policies and guide external contractors on site requirements
• As authorized permit to work applicant
• Good record keeping in all involved tasks relevant data in SAP
• Adherence and support EHS initiatives and compliance
• Maintain and support all site activities according to accreditation standards in the scope of the QMS [ISO 9001 & Good Manufacturing Practice (GMP)]

Academic Background

• NITEC/ITC/Diploma in Electrical, Instrumentation, Control and/or Automotive background

Technical Skills

• Familiar with basic SAP Plant Maintenance function (module)
• With some experience with the Programme Logic Control (PLC) and Supervisory Control and Data Acquisition (SCADA) system
• Good knowledge of EHS rules and guidelines. • Good coordination skills with contractors/vendors
• Able to interpret P&ID, electrical single line diagram, instrument hook up drawing, SCADA network drawing, instrument datasheet etc
• Able to organized and have good interpersonal skills
• Well verse in Microsoft office (e.g. Words and Excel)

Professional experience

• 3 to 10 years of experience in maintenance or projects work

Our Benefits

• We offer attractive package with benefits
• Excellent opportunities for progressive learning and development
• A creative team environment that will inspire you
• Comprehensive healthcare plans
• PTO and family leave