Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Responsibilities

- Prepare BIM Model, Shop drawings, Plan & Section drawings of HVAC related according to client’s requirements.

- Coordinate with main-contractor’s draft person (3D modeler) for ensuring that all arising matters while establishing

and coordinating the HVAC drawing with other MEP drawings are resolved for smooth combination to the overall

CSD requirements.

- Report and update BIM progress whenever required.

Jobskill / Experience

- Min 3 Year(s) of working experience in ACMV/HVAC Field is preferred.

- Knowledgeable in CP83 Local CAD Standard, AutoCAD 2D, duct and piping layout and schematic drawings,

knowledge of 3D BIM Modelling (Revit is a MUST), MEP, MicroStation and Navisworks is a plus.

- Knowledge of applicable codes, policies, standards, and best practices.

Qualification

Nitec relevant certificate or Higher Certificate in Drafting, Diploma Holder in Building Services or Mechanical & Electrical Services

Our Company involves in Design & Installation of ACMV System field for 33 years, majority in Pharmaceutical/Chemical/Oil&Gas/Flavour & Fragrance industries. We are currently looking out for Project Engineers to join our team.

Qualification

Degree / Diploma in Mechanical / Building Services or equivalent

Experience

Min 2 Year(s) of working experience in HVAC or Building Services preferred.

Roles & Responsibilities

. Site supervision of Project progress & liaise with

Clients/Consultants/Subcontractor/Workers

· Review project plans and specifications to ensure that the HVAC system design meets the required standards,

codes and regulations

· Select the appropriate HVAC equipment, materials, and component that meets the project requirements.

· Check site installation work as per approved drawings

· Understand and able to prepare the standard detail drawing to suit the respective project & shop drawings

· Check and follow up closely the daily site installation progress and able to take immediate action to tackle the delay.

· Able to liaise with different vendors and sub-contractors for different types of materials to be proposed and

submit for approval and subsequently procure them upon approved.

· Assist Project Manager to oversee overall project progress, manpower and monitor project schedule

Organizational Relationships: • Reports directly to Project Director.

Authorities: In charge of planning, executing, and finalizing projects according to strict deadlines and within budget. This includes acquiring resources and coordinating the efforts of team members and third-party contractors or consultants in order to deliver projects according to plan. In addition, the Project Manager will also define the project’s objectives and oversee quality control throughout its life cycle.

Responsibilities:

1. Typical duties will include but not be limited to the preparation and/or modification of the following:

• Civil/Structural engineering plans, design, and layout.
• Civil/Structural project specifications.
• Civil/Structural engineering portion of project proposals.
• Civil/Structural engineering portion of project cost estimates.

2. Provide drawing for own designs and produce sketches to incorporate in drawings by drafters.

3. Develop probable construction cost estimates for projects.

4. Use computer-assisted engineering design and software and equipment to prepare engineering design documents.

5. Perform field activities such as observe and record existing field conditions, take and verify measurements within project

area.

6. Direct and manage project development from beginning to end.

7. Define project scope, goals and deliverables that support business goals in collaboration with senior management and

stakeholders.

8. Develop full-scale project plans and associated communications documents.

9. Effectively communicate project expectations to team members and stakeholders in a timely and clear fashion.

10. Liaise with project stakeholders on an ongoing basis.

11. Estimate the resources and participants needed to achieve project goals.

12. Draft and submit budget proposals, and recommend subsequent budget changes where necessary.

13. Where required, negotiate with other department managers for the acquisition of required personnel from within the

company.

14. Determine and assess need for additional staff and/or consultants and make the appropriate recruitments if necessary

during project cycle.

15. Set and continually manage project expectations with team members and other stakeholders.

16. Delegate tasks and responsibilities to appropriate personnel.

17. Identify and resolve issues and conflicts within the project team.

18. Identify and manage project dependencies and critical path.

19. Plan and schedule project timelines and milestones using appropriate tools.

20. Track project milestones and deliverables.

21. Develop and deliver progress reports, proposals, requirements documentation, and presentations.

22. Proactively manage changes in project scope, identify potential crises, and devise contingency plans.

23. To carry out any tasks that is required by Management and as assigned for upholding the ISO 9001: 2008 and OHSAS

18001:2007 Intergrated Management System.

Qualifications:

1. Educational Qualification: Bachelor Degree in Civil Engineering or equivalent.

2. Relevant Experience: 2 years in project management, with special focus on structural engineering.

3. Computer Literacy: Advanced experience with Microsoft Office, AutoCad and StruCad and Project Management software.

Competency Requirements:

In a multicultural environment / work force, the incumbent should:

• be proficient in English
• have strong interpersonal skills, including written and oral communication skills.
• be persuasive, encouraging, and motivating.
• possess the ability to defuse tension among project team, should it arise.
• possess the ability to effectively prioritize and execute tasks in a high-pressure environment is crucial.
• possess the ability to read communication styles of team members and contractors who come from a broad spectrum of disciplines.
• possess the ability to shift priorities, demands and timelines through analytical and problem-solving capabilities.
• react to project adjustments and alterations promptly and efficiently.
• possess the ability to elicit cooperation from a wide variety of sources, including upper management, clients, and other departments.

Roles & Responsibilities

Requirements:

• Candidate must possess at least a Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering or equivalent.
• At least 7 Years) Working experience in the related field is required for this position.
• Required Skill(s): Project Management
• Preferably, a Manager specialized in Engineering - Civil/Construction/Structural or equivalent.
• Singaporean/SPR

Responsibilities:

• Monitor and manage the day-to-day operations of the project, or function, including developing and monitoring budgets, coordinating activities with other subcontractors
• Handle contractual matters that arise
• Check drawings and quantities and ensure that these are accurate for the execution
• Oversee the selection and requisition of materials required at the site.
• Plan the work schedule and efficiently organize the site facilities to meet an agreed program of deadlines;
• Liaise with consultants and/or sub-contractors engaged in the project;
• Attend regular meetings with owner/client/contractors/sub-con and ensure the progress is on schedule;
• Oversee quality control and safety matters on the site;
• Resolve any unexpected technical difficulties and other problems that may arise
• Overall responsible for the execution of the projects
• Monitor the cash flow and budgeting of the project
• Accountable for the project’s projected profit
• Identify and comply with all applicable statutory/regulatory requirements for the project under his/her jurisdiction.
• Monitor work progress to ensure the project stays on schedule.
• Ensure in-progress inspection and joint inspection Monitor work progress to ensure the project stays on schedule.
• Carry out in-progress inspection and joint inspection
• Conduct safety and environmental risk assessment of projects handled
• Ensure staff work in a safe and orderly manner
• Ensure toolbox meetings are carried out for the project.
• Identify QEOHS training needs of subordinates

• Required 05+ years of experience in the Marine industry

• Required Class 4 Driver Skill and Supervisor skill in Marine industry

• Strong knowledge of marine coatings and painting material

• Effective communication and teamwork skills

• To Review Daily work progress and make a necessary change in order to meet Good KPI

• To check and conduct daily Tool Box meeting with workforce and monitor daily onsite to ensure all works are done safely and productively.

• To Collaborate with other shipyard personnel, including welders, fabricators, and supervisors, to coordinate painting activities and meet project timelines.

• The Supervisor will oversee all painting and coating-related activities, including grit blasting, surface preparation, and mixing and applying various types of marine-grade primers and paints.

• The Supervisor will ensure the quality of work, proper material application, and compliance with regulatory requirements.

• Familiarity with painting equipment, such as spray guns, compressors, and airless sprayers.

• Use spray guns, brushes, and rollers to apply marine coatings, including epoxy, enamel, and anti-corrosive paints

• Follow established safety protocols and procedures to prevent accidents and injuries.

Job Description & Requirements

• Required 05+ years of experience in the Marine industry

• Required Class 4 Driver Skill and Supervisor skill in Marine industry

• Strong knowledge of marine coatings and painting material

• Effective communication and teamwork skills

• To Review Daily work progress and make a necessary change in order to meet Good KPI

• To check and conduct daily Tool Box meeting with workforce and monitor daily onsite to ensure all works are done safely and productively.

• To Collaborate with other shipyard personnel, including welders, fabricators, and supervisors, to coordinate painting activities and meet project timelines.

• The Supervisor will oversee all painting and coating-related activities, including grit blasting, surface preparation, and mixing and applying various types of marine-grade primers and paints.

• The Supervisor will ensure the quality of work, proper material application, and compliance with regulatory requirements.

• Familiarity with painting equipment, such as spray guns, compressors, and airless sprayers.

• Use spray guns, brushes, and rollers to apply marine coatings, including epoxy, enamel, and anti-corrosive paints

• Follow established safety protocols and procedures to prevent accidents and injuries.

An ACMV (Air Conditioning & Mechanical Ventilation) Installation Site Coordinator plays a crucial role in overseeing and coordinating the installation of ACMV. Their duties and responsibilities are focus on ensuring the project is completed efficiently, safely, and within budget. Detailed breakdown of their responsibilities shall be as below and but not limited to:

1. Project Planning & Scheduling

• Work Scheduling: Coordinate and schedule all activities related to the installation of ACMV systems, ensuring that work is carried out according to the project timeline.
• Resource Allocation: Ensure that manpower, materials, and equipment are available as per project needs and schedules.
• Coordination with Contractors: Collaborate with subcontractors, suppliers, and other vendors involved in the installation process to ensure timely delivery and work execution.

2. Site Supervision

• Site Setup: Oversee the setup of the installation site, ensuring that all necessary equipment and materials are in place.
• Installation Supervision: Monitor the installation of ACMV systems such as ducting, piping, chillers, AHUs (Air Handling Units), FCUs (Fan Coil Units), BMS system, ESCS system, Jet Fan system and other components.
• Safety Compliance: Ensure that the installation is carried out according to safety regulations and that all team members are adhering to safety protocols (e.g., wearing PPE, following safety guidelines).
• Quality Control: Supervise the installation process to ensure that the work is completed to the required quality standards and complies with the project specifications and drawings.

3. Technical Support & Problem Solving

• Troubleshooting: Identify and resolve technical /site issues, constraint that arise during installation, working closely with engineers and technicians to provide solutions.
• Technical Assistance: Provide on-site technical support to ensure the correct assembly and installation of ACMV systems as per the design specifications.
• Adjustment & Modification: Recommend and implement necessary adjustments or modifications during the installation process to address unforeseen issues or improve efficiency.

4. Liaison with Stakeholders

• Client Interaction: Act as the main point of contact between the client and the project team, ensuring that the client's requirements and expectations are met.
• Coordination with Engineers: Work closely with Supervisor, Engineers, Designers, BIM team and Project Manager to ensure the installation meets design specifications and standards.
• Reporting: Provide regular progress updates and reports to Project Managers, Site engineers, and other relevant stakeholders.

5. Documentation and Reporting

• Project Documentation: Maintain accurate records of installation activities, including daily site reports, inspection reports, and material usage logs.
• Variation Management: Track and document any changes or variations to the project scope and ensure they are communicated to the relevant stakeholders.
• Site Meetings: Attend regular site meetings to review progress, discuss challenges, and plan the next phase of work.

6. Inspection & Testing

• Inspection of Installation: Ensure all installed systems and equipment are properly inspected for compliance with design and installation standards.
• Pre-commissioning Tests: Coordinate pre-commissioning tests, including leak testing of ductwork and piping, to verify the systems' integrity and performance. ACMV RI and TOP items inspection preparation and check before RI and TOP inspections.
• Final Commissioning: Assist in the commissioning of ACMV systems, ensuring that all testing, balancing, and adjustments are completed before handing over to the client.

7. Health, Safety, and Environmental Compliance

• Safety Training: Conduct safety briefings and ensure all workers are trained in safety practices specific to ACMV installation.
• Environmental Compliance: Ensure that installation practices are environmentally friendly, reducing wastage, managing emissions, and recycling materials where possible.
• Risk Assessment: Conduct risk assessments to identify and mitigate potential hazards on-site.
• Site Attendance: To attend everyday morning exercise and tool box meeting as per main con scheduled timing, conduct site walk to check and monitor site progress and arrange subcon workers and direct workers for necessary work to carry out.
• Permit Application: Apply Permit to Work (PTW) and other necessary permit such as Work at height, hot work, confined space, etc via main con NOVADE application platform.

8. Coordination of Multiple Trades

• Interfacing with Other Trades: Coordinate with other trade contractors (electrical, plumbing, civil) to ensure smooth progress and avoid conflicts between work activities.
• Sequencing Work: Ensure that ACMV installation is sequenced properly in relation to other trades and that all work is integrated effectively within the overall project.

9. Cost Control

• Material Management: Monitor material usage and inventory to avoid wastage and overstocking.

10. Post-Installation Support

• System Handover: Participate in the handover process, ensuring all necessary documentation and manuals are provided to the client.
• Defect Rectification: Oversee the rectification of any defects found after installation, ensuring they are addressed in a timely manner.

11. Training and Mentoring

• Team Training: Ensure the installation team is well-trained in the latest ACMV technologies, tools, and safety procedures.
• Mentorship: Provide guidance to junior staff and technicians on technical aspects and best practices of installation.

In summary, the ACMV Installation Site Coordinator is responsible for overseeing the complete installation process, from planning to execution and final handover, ensuring that everything runs smoothly, safely, and according to specifications. They serve as a central point of coordination between the project management team, contractors, engineers, and clients.

Requirements:

- Diploma or above in mechanical engineering or related qualifications

- Min 2 years on site experience

- Experience in BIM is an added advantage

- Strong independence and good communication in English

- Able to work 5.5 days week

Join Our Growing Team!

The SKYLINK Group is a premier all-in-one mobility solution provider for retail sales of passenger cars and commercial vehicles, all vehicle leasing, Motor insurance, credit Hire Purchase financing, Motor workshop with full capacity of MRO (Maintenance, Repair and Overhaul) services, and vehicle body engineering works for all commercial and passenger vehicles.

Since 2017, SKYLINK Group has been rapidly expanding its offerings and fleet. We have served over 5,000 corporate customers including major industry leaders in logistics, distribution, F&B, marine, construction, sanitation, and government services.

With a commitment to fleet modernization, we have expanded our offerings to EV and Hybrid vehicles, and continuously aspire to provide greater value to our customers.

Be a part of the SKYLINK family and kick-start your career growth and progression in the mobility space today.

Job Description:

• Develop and implement sales strategies to meet or exceed sales targets for commercial vehicles, including market analysis, forecasting, and competitive positioning.
• Lead, train, and motivate the sales team to achieve individual and team goals, while fostering a collaborative and results-oriented work environment.
• Build and maintain strong relationships with key clients, including fleet buyers, logistics companies, and corporate customers, ensuring a high level of customer satisfaction.
• Identify and pursue new business opportunities, including expanding into new markets and segments, and securing contracts with key commercial clients.
• Maintain deep product knowledge of the company’s commercial vehicle offerings and stay updated on industry trends, regulatory changes, and competitor products to effectively communicate value to customers.
• Manage pricing, quotations, and contract negotiations to ensure profitability while remaining competitive in the market.
• Work closely with various departments to align sales strategies with overall business goals and ensure smooth execution of sales contracts and vehicle delivery.
• Prepare sales performance, generate reports weekly on sales metrics, and analyze data to identify areas for improvement and growth.
• Oversee payment-related issues, including account arrears and overdue payments.

Job Requirements:

• Diploma / Degree holder, with at least 5 years’ experience in managing sales teams in automotive trade.
• Strong leadership and team management skills.
• Excellent communication, negotiation, and interpersonal skills.
• Ability to analyze market trends and develop sales strategies.
• Results-driven with a focus on meeting and exceeding sales targets.
• Possess Class 3 driving license.

Join Our Growing Team!

The SKYLINK Group is a premier all-in-one mobility solution provider for retail sales of passenger cars and commercial vehicles, all vehicle leasing, Motor insurance, credit Hire Purchase financing, Motor workshop with full capacity of MRO (Maintenance, Repair and Overhaul) services, and vehicle body engineering works for all commercial and passenger vehicles.

Since 2017, SKYLINK Group has been rapidly expanding its offerings and fleet. We have served over 5,000 corporate customers including major industry leaders in logistics, distribution, F&B, marine, construction, sanitation, and government services.

With a commitment to fleet modernization, we have expanded our offerings to EV and Hybrid vehicles, and continuously aspire to provide greater value to our customers.

Be a part of the SKYLINK family and kick-start your career growth and progression in the mobility space today.

Job Description:

• Assess gaps and opportunities based on stakeholder feedback to improve business processes.
• Build good relationships with industry players
• Develop business development plans that follow business development strategies
• Develop business reports on new revenue streams, improved products and new businesses
• Develop measures to ensure corporate regulations are followed
• Develop new business proposals based on market demand
• Develop new product service offerings to meet market demands
• Develop plans to use new technologies for business processes
• Engage with business partners, suppliers and vendors for new business agreements
• Provide on-the-job training and performance evaluation for staff
• Review risk assessment and financial modelling of new business ventures
• Review targets and goals across teams
• Support stakeholder engagement sessions for new portfolios
• Use business network and support knowledge sharing sessions to explore new business opportunities
• Work with stakeholders to review gaps and opportunities in businesses

Job Requirements:

• Diploma / Degree holder, with at least 5 years’ experience ito work in automotive trade.
• Strong leadership and team management skills.
• Excellent communication, negotiation, and interpersonal skills.
• Ability to analyze market trends and develop sales strategies.
• Possess Class 3 driving license.

Job Description & Requirements

1. Prepare and interpret blueprints, schematic drawings, layouts and other visual aids.

2. Coordinate with various Government agencies and utility authorities for initial site clearance and set up site office

3. Report on daily issues to Project Manager / Construction Manager

4. Plan, schedule and monitor work progress at site

5. Continuously ensure adherence to planned timeliness

6. Maintain and monitor quality controls

7. Prepare and submit all daily and weekly reports as required

8. Ensure safe work procedures and environmental control measures are implemented on work site

9. Prepare method statements and other submission

10. Checking drawings and quantities and ensuring that the calculations are accurate for the work

11. Liaising with consultants and/ subcontractors engaged in the project

12. Supervising and monitoring the site labour force and monitoring the work of subcontractors

13. Overseeing quality control and safety matters on site and ensuring that regulations are adhered to

14. Preparing complete, accurate and timely submittal logs for construction projects based on project drawings and specifications.

15. Accountable for receiving approved submittals from and notifying the Project Manager of potential schedule impact.

16. Assist Project Manager by preparing all necessary backups relating to change requests.

17. Distribute contract documents to subcontractors, including drawings, specifications, and general conditions. Include any accepted alternates or addendums with documents.

18. Schedule all required construction meetings with required personnel subcontractors, architects and owners

19. Prepare correspondence with client, architect, engineers, subcontractors, suppliers, etc. Examples of referenced correspondence include, but not confined to the following items: Schedule of values, project schedule, memos, request for information (RFI), transmittals and submittals.

20. During Construction Phase, proactively manage project to achieve quality, schedule, budget and safety.

21. Utilize and maintain tools: schedule and document management to track and record project performance.

22. Planning work to ensure that materials, machineries, authorities’ approval and sites condition are ready before the work starts.

23. Coordinating with authorities, clients to ensure efficient and timely delivery of assignment

Technical / Adminstrative Duties

• Minimum 5 years' relevant experience in ACMV Project design and build for various type of buildings, including cleanroom and bio-lab projects.
• Documenting and certificating all work carried out to meet our contractual and statutory obligations
• Identifying and resolving remedial requirements on all systems
• Quoting and undertaking project work as required by the client

Requirements:

• Degree or Diploma in Mechanical / Electrical / Building Services Engineering or Equivalent;
• Experience in ACMV / Mechanical / Electrical / Building Services Project and Maintenance work.
• Experience in both industrial and commercial air-cons
• Ability to work independently and manage multiple projects
• Possess good interpersonal communication and presentation skills

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills.
• Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 10 years working experience on related sites

Join Our Growing Team!

The SKYLINK Group is a premier all-in-one mobility solution provider for retail sales of passenger cars and commercial vehicles, all vehicle leasing, Motor insurance, credit Hire Purchase financing, Motor workshop with full capacity of MRO (Maintenance, Repair and Overhaul) services, and vehicle body engineering works for all commercial and passenger vehicles.

Since 2017, SKYLINK Group has been rapidly expanding its offerings and fleet. We have served over 5,000 corporate customers including major industry leaders in logistics, distribution, F&B, marine, construction, sanitation, and government services.

With a commitment to fleet modernization, we have expanded our offerings to EV and Hybrid vehicles, and continuously aspire to provide greater value to our customers.

Be a part of the SKYLINK family and kick-start your career growth and progression in the mobility space today.

Job Descriptions:

• Provide quotation for customers and advise the best insurance and its products
• Provide advisory roles for insurance related inquires
• Administer documentation for cost, claims and Issuance of Cover Note, Insurance Certificate and Invoicing to customer
• Follow up with customers on payment collection from customer
• Follow up with existing customers base for policy renewal
• Follow up with customers and insurance companies for payment of Excess pertaining to own damage claims and repair costs pertaining to third-party claims
• Liaise with all parties, mainly workshop and insurance partners for accurate information provide to customer and prompt repair of the vehicle
• Effectively handle multiple priorities, organize workload, meet deadlines and perform detailed daily record keeping and reporting
• Ensure all customer issues or complaints reported are resolved and addressed in a timely manner to ensure customer satisfaction
• Weekly and monthly updates and report to Directors

Requirements:

• At least 3 Year(s) of working experience in the related field is required for this position
• Possess Basic Insurance Concepts and Principles (BCP), Commercial General Insurance (CGI) & Personal General Insurance (PGI) Certificates is an advantage
• Good interpersonal and communications skills with the ability to build strong client relationship
• Meticulous with a flair for details, multi-task and highly committed
• Able to prioritize, articulate issues, problem identification, evaluation, and provide resolution
• Team player with self–discipline and willing-to-learn qualities

The Offensive Engineering Analyst will be responsible to conduct vulnerability assessment/penetration tests of Income internal/external web, mobile and web service applications and execute simulated security testing against corporate web applications, networks, and infrastructure. This role will come under the IT Risk and Security department, reporting to the Senior Manager of Cyber Assurance.

Key Responsibilities

• Coordinate with external vendors to conduct application security/penetration tests of Income internal/external web, mobile and web service applications, leveraging both manual techniques as well as automated tools in order to uncover and report security vulnerabilities that exist and liaising with systems & applications owners on follow up actions.
• Perform vulnerability scanning/discovery, tracking of remediation SLA and vulnerability fix verification in support of the remediation
• Plan and scope the internal Red Teaming program to conduct red teaming exercises and execute adversarial simulations mimicking real-world threat actors (APTs, insider threats, etc.) against Income environment using tools and manual techniques.
• Conduct compliance audit on Income Systems and Devices hardening standards.
• Perform risk assessment and recommend mitigations on vulnerability findings when remediation is not possible.
• Administer security tools and service providers.
• Support the running of bug bounty and vulnerability disclosure programs.
• Conduct meetings to communicate the findings and implications to stakeholders and track remediation status and outcomes.
• Undertake other projects and tasks that may be assigned by management.

Qualifications

• Bachelor's Degree with more than 5 years of experience in technology, information or cyber risk management, information security or enterprise architecture.
• Minimum of three years years of experience in offensive security (Red Teaming, Penetration Testing, or related fields).
• Minimum of two years direct information security experience in penetration testing, vulnerability assessment, threat hunting, red teaming or similar roles.
• Strong background in application development, web application technologies and architectures, application security testing or vulnerability assessment.
• Familiar with penetration testing steps, methods, procedures, and excellent in using penetration testing tools.
• Familiar with attack techniques and methods, common security vulnerabilities and threats of network and application systems, and competent in identifying and evaluating these vulnerabilities and threats with existing tools.
• Equipped with programming skills in Java, .NET or Python.
• Relevant industry certifications such as CEH, OSCP, OSCE, GPEN, GWAPT, CREST CRT certifications is preferred.

Competencies

• Hands-on experience on vulnerability assessment tools (Preferably Tenable and others such as Qualys, Rapid7).
• Working knowledge on industry standard scoring models such as CVSS.
• Working knowledge on SAST, DAST, IAST, SCA and DevSecOps.
• Familiarity with penetration testing techniques (eg web application proxies, packet capture analysis software, browser extensions, penetration testing Linux distributions, static source code analyzers, SoapUI, etc).
• Good understanding of adversary tactics, techniques, and procedures (TTPs), such as those outlined by MITRE ATT&CK.
• Good understanding of offensive security tools (e.g., Cobalt Strike, Metasploit, Burp Suite, BloodHound, Mimikatz).
• Good written skills and able to effectively communicate security and risk-related concepts to technical and non-technical audiences.
• Work well under pressure and demonstrate the ability to meet tight deadlines.
• Able to work independently and in a team-oriented, collaborative environment.

We are seeking a dynamic and experienced professional to join Couchbase as the Director of Solution Engineering. In this role, you will play a pivotal part in supporting our Account Teams and engaging with accounts across your allocated region/geography.. As the Director of Strategic Solution Engineering, you will bring your expertise in Solution Engineering and Presales Leadership to drive success in collaboration with our key customers.

Responsibilities:

● Collaborate closely with Account Teams and our Customers to understand customer requirements and design tailored solutions.

● Serve as a key technical advisor and liaison between customers and internal teams, ensuring effective communication and alignment of goals.

● Lead a team of Solution Engineers, providing mentorship, guidance, and strategic direction to drive excellence in customer engagement.

● Utilize your extensive Solution Engineering background to articulate complex technical concepts and capabilities to both technical and non-technical stakeholders.

● Leverage your 4+ years of presales leadership experience to drive strategic initiatives and contribute to the overall success of the organization.

● Fluently apply the MEDDIC framework in customer interactions to uncover and address key customer needs and challenges.

● Demonstrate a deep understanding of database technology, particularly in the NoSQL space, to effectively position Couchbase solutions.

Qualifications:

● 7+ years of experience as a Solution Engineer, with a strong technical background in database technology.

● 4+ years of experience in presales leadership, showcasing a track record of success in building and leading high-performing teams.

● Proven track record in data centric presales efforts and specifically, database technologies.

● Fluent in MEDDIC methodology, with a proven ability to apply it to complex sales engagements.

● Highly collaborative mindset with the ability to build strong relationships with internal and external partners.

● Self-motivated and able to thrive in a high-accountability environment.

● Comfortable working with cutting-edge database technology and staying abreast of industry trends.

Responsibilities

• Editorial support (admin & editorial work)
• Topic/trend spotting & research in Engineering/Computer Science/Environmental Science
• Database management and building
• Minimum period of employment: 8 weeks
• Minimum education level: polytechnic student / undergraduate
• Specialisation in Engineering/Computer Science/Environmental Science-related fields preferred but not necessary

• Manage and grow existing accounts to ensure continuous growth
• Expand market share with existing and new customers
• Willingness to meet clients on-site to understand their needs, provide hands-on demonstrations, and establish a personal connection to build trust.
• Preparation of quotations
• Assiat in stock take and stand by delivery.
• Assist site project and oversea on site if needed.
• To develop strategy in order to meet sales target
• Required valves assemble if needed.

Requirements:

• Diploma/Degree in Electrical / Electronic / Mechanical Engineering, or relevant education.
• Prefer 2 years experience in related industry.
• Possess Class 3 license with own vehicle

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

EA License No: 20C0270

EA Personnel No: R22110981

EA Personnel Name: Law Mei Fong

Mon to Fri: 8:15am to 5:30pm

Responsibilities:

- Leads new product design, development activities of connectors, wire harness and electronic packages.

- Responsible for managing pre-engineering, product design development of new products.

- Performs value analysis, value engineering and troubleshooting.

- Manage a team of Product Design engineers and responsible for products’ lifecycle.

- Guide team in performing data analysis, yield enhancement, product cost reduction and device reliability improvement.

- Develop market-specific connector products and optimizing product designs and yields.

- Initiate and implement improvement processes to improve efficiency and sustainability in productions.

- Communicate technical information to non-technical stakeholders, and building relationships with suppliers and customers.

- Ensure processes meet quality standards and safety compliance requirements.

Requirements:

- Degree / Diploma in Mechanical Engineering/ Electrical Engineering and or other related certifications.

- Possess relevant connectors industry knowledge and expertise

- At least 8 years of experience involved with product engineering (design and development)

- Experienced in leading a team

You'll be at the heart of shaping the company success by optimizing operations, and guiding teams toward peak performance. Apply Now!!

• Permanent Position / MNC/ Manufacturing/ Near Woodlands MRT/ Urgent Hiring!!
• AWS/ Annual Leave/ Medical Benefit/ Dental Benefit/ 5 days’ work week
• Possess Master Molder Certificate 1 or 2

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities

• Heading entire process engineering team in production, tooling, NPI and validation.
• Responsible for injection molding and its associated processes for the medical, automotive and technology sectors.
• Lead the activities of process engineering, production/process improvement pertaining to molding process development, mold buyoff, new mold transfer, quality issues.
• Provide documented procedures on buyoff on new / transfer molds prior to mass production release keeping process development as the core activity.
• Lead process validation activities including generation of validation protocols and reports such as IQ, OQ and PQ.
• Ensure that yields and cycle time are in accordance with BOM standard.
• Work in cross-functional group to coordinate with all process-related issues.
• Investigate and implement solutions on process or material related problems.
• Extend support to productivity program such as process automation, tool fabrication and improvement activities.
• Provide adequate support for the cross functional activities such as handling non-conformance product; Initiate actions to prevent recurrence through proper documentation of process instructions, root cause analysis, process flow chart, FMEA, Control Plan.
• Conduct periodical review of process-oriented SOPs & other documentations & keep them up to date a timely basis.
• Drive for continuous improvement projects. Maintain the effectiveness of the validated processes through the understanding of cGMP (current Good Manufacturing practice.

Requirements

• Bachelor’s degree / Diploma qualification in plastic processing / chemical / mechanical engineering.
• Possess Master Molder Certificate 1 or 2.
• Min 10 years industrial experience in plastic engineering and its processing technique.
• Possess through knowledge and practice on scientific molding techniques.
• Knowledge of handling all sort of plastic polymers and molds.
• Familiar and hands on with medical device validations.
• Expert in analysing cycle time and provide support to RFQs.
• Knowledgeable in Risk Assessment, Failure mode analysis, Process Validation, Continuous Improvement and Design of Experiments (DOE).

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

Join Our Growing Team!

The SKYLINK Group is a premier all-in-one mobility solution provider for retail sales of passenger cars and commercial vehicles, all vehicle leasing, Motor insurance, credit Hire Purchase financing, Motor workshop with full capacity of MRO (Maintenance, Repair and Overhaul) services, and vehicle body engineering works for all commercial and passenger vehicles.

Since 2017, SKYLINK Group has been rapidly expanding its offerings and fleet. We have served over 5,000 corporate customers including major industry leaders in logistics, distribution, F&B, marine, construction, sanitation, and government services.

With a commitment to fleet modernization, we have expanded our offerings to EV and Hybrid vehicles, and continuously aspire to provide greater value to our customers.

Be a part of the SKYLINK family and kick-start your career growth and progression in the mobility space today.

Responsibilities:

• Supervise and assign job to a team of workshop mechanics
• Co-ordinate between workshop and customer, updating of job status
• Prepare job card/orders for customers' requirement
• Perform vehicle controlling in the workshop, check in and out of vehicles
• Perform hands-on trouble shooting on vehicle, ordering of spare parts
• Perform quality control check on vehicles
• Prepare quotation and proforma invoices when necessary
• Job progress follow-up and recommendation of any additional jobs required when necessary
• Oversee workshop housekeeping and workplace safety
• To provide initiative to ensure smooth and efficient operation
• Any ad-hoc duties as assign by superior

Requirements:

• Minimum NTC/Nitec in Automotive Technology or at least 2 years in automotive after sales car & commercial vehicle (workshop)
• Good communication skills and a team player
• Class 3 & 4 driving license with a minimum 2 years’ experience
• Hard working, highly responsible and take ownership in the job
• Computer literate

Job Description
As a BIM Engineer, you will report to the Senior Design Engineer and be responsible for the successful implementation and management of BIM processes in the construction field, specifically focusing on Building Services, Airconditioning, and Mechanical (M&E, ACMV) works. You will collaborate closely with the design department to ensure compliance with engineering and safety requirements and coordinate with stakeholders to maintain the integrity and accuracy of the BIM model throughout the project lifecycle.

Key Responsibilities

1. Construct and manage Building Information Models (BIM) with precision, ensuring the integrity and accuracy of all models. Ensure timely coordination and completion of tasks as assigned by the immediate superior.
2. Ensure all BIM models comply with project specifications and requirements.
3. Maintain and update the model library for all ongoing projects, ensuring that all data remains secure and is treated as company property.
4. Collaborate with project teams to collect site information for updating project BIM models.
5. Work closely with the Quantity Surveying department to provide drawings and information required for tendering, cost estimation, monitoring, and scheduling.
6. Coordinate with the BIM department to validate and confirm the accuracy of BIM designs.
7. Maintain, update, and manage hardware and software essential for the operation of BIM.
8. Assist in the creation of 2D AutoCAD drawings and ensure seamless integration between 2D and BIM models, bridging the gap between office and site operations.
9. Ensure all work conforms to the company’s ISO standards.
10. Support the submission of Operation, Maintenance, and Monitoring (OMM) manuals and media presentations using BIM models.
11. Follow the company's responsibility and authority matrix in the execution of duties.
12. Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes and standards, such as Singapore Code of Practice (CP13), SS553, and the Fire Code.
13. Utilize design software to perform thermal load calculations, energy modelling, and system sizing.
14. Prepare design documents including system layouts, schematics, and specifications.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Requirements

1) To Work as lead Engineer for Oil & Gas Project

2) Leading a Team of Electrical Engineers in Preparation & Review of Load lists, Single Line diagram of PCC, PMCC, MCC, DB's, Equipment Sizing Calculation, System Study through ETAP (Version 19.1) and Preparation & Review of Layouts like Hazardous Area classification, Lighting Layout, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.

3) Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies

4) Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/ approvals/resolution of open issues

5) Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team

6) Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.

7) Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works.

8) Preparation and Compliance for Engineering Audit Requirements.

9) Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.

10) Technical assistance to construction activities and attending to Site Queries.

11)Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.

12) FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

13) Coordination with PMC / QP and Construction Coordination.

14) Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works

15) Inspecting various equipment like LV & MV Bus duct, LV & MV Switchgear, Cables, Transformer, AC / DC UPS

16) Field Engineering Support Activities to complete the task in accordance with the project schedule.

17) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

18) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelors’ Degree in Electrical Engineering

Experience

Preferably Minimum 15 years of experience

Software Requirements

ETAP, DIALUX, Auto cad, MS Excel, MS Word

Job Scope:

• Collaborate with architects, project managers, and other stakeholders to ensure integration of M&E systems
• Ensure compliance with relevant regulations, codes, and safety standards
• Conduct site inspections to monitor installation progress and quality
• Troubleshoot and resolve technical issues related to M&E systems
• Prepare technical documentation, including specifications and reports
• Manage procurement of M&E materials and equipment
• Provide leadership and mentorship to engineering teams
• Monitor project performance and implement improvements as needed

Requirements:

• Degree in Mechanical or Electrical Engineering or equivalent
• Minimum 10 years of experience with at least 2 LTA MRT underground projects
• Proficient in BIM software and AutoCAD (preferred)
• Experience in writing tender specifications (preferred)
• Strong communication, writing, and analytical skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Manage and grow existing accounts to ensure continuous growth
• Expand market share with existing and new customers
• Willingness to meet clients on-site to understand their needs, provide hands-on demonstrations, and establish a personal connection to build trust.
• Preparation of quotations
• Assiat in stock take and stand by delivery.
• Assist site project and oversea on site if needed.
• To develop strategy in order to meet sales target
• Required valves assemble if needed.

Requirements:

• Diploma/Degree in Electrical / Electronic / Mechanical Engineering, or relevant education.
• Prefer 2 years experience in related industry.
• Possess Class 3 license with own vehicle

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

EA License No: 20C0270

EA Personnel No: R22110981

EA Personnel Name: Law Mei Fong