Responsibilities:

• Negotiation to achieved cost saving driving towards KPI targeted set.
• Generate Purchase Orders and issue to vendors.
• Monitoring scheduled delivery dates and raising any related issues which might impact product quality and project timelines.
• Maintain and ensure procurement documentation is updated regularly in system (ERP).
• Send requisition and request quotation based on Requestor specification/ requirement.
• Negotiate pricing with vendors, per product knowledge justification.
• Monitor scheduled delivery dates and raise any related issues which might impact product quality and project timelines.
• Assist on non-conformance, provide administrative support related to payment issues, freight document verification and shipment arrangement to vendor for rejected goods, etc.
• Collaborate with vendors to rectify recurring supply and quality issues.
• Maintain and ensure procurement documentation is updated regularly. Example: Generate monthly purchased histories details, Saving, Delivery, RFQ, PO & etc
• Source for new/ alternate vendors to ensure the supply for KEY commodities.
• Prequalification of vendors (AVL).
• Run errands for self-collection/ delivery for standard part & fabrications secondary process.
• Support Senior Procurement and Procurement Executive on issue PO, data entry, data gathering and etc.

Requirements:

• Nitec/ Diploma holder in Engineering or a related field.
• Min 1 – 2 years of relevant experience, preferably in Precision/ Manufacturing Engineering environment.
• Fundamental knowledge of Supply Chain & Inventory Management.
• Able to interpret basic mechanical drawing preferred.
• Experience in Microsoft Excel, Word and Powerpoint for project management.
• Good Communication, negotiation, problem solving and sourcing skills.
• Experience in participating project management.

Responsibilities:

• Responsible for pre and post contract QS services;
• Handles interim and final payment claims and feedback comment to payment response to Management
• Job site visiting and monitor site progress
• Responsible for quantities taking-offs, work out variations claim, verify measurements with the client
• Handles contract administration and settlement of final accounts with clients & subcontractors;
• Monitors project phasing & payments;
• Preparation & Revision of Construction Programmes & follow-up delay claims

Requirements:

• Degree in Applied Science in Construction Management or Diploma in Building Services / Mechanical / Electrical engineering
• Able to meet challenging work demands and tight schedules
• Good interpersonal and communication skill
• Good command of spoken and written English
• Independent and resourceful

Responsibilities:

• Able to adapt to the various functions within the HR department
• Updating of staff information in the database and Personnel File Maintenance and ensuring confidentiality at all times
• Conduct newcomer’s orientation process and briefing of employment for contract terms and conditions
• Assist in all Recruitment Acctivities & Work Pass Applications such as Work Permit/SPass/EPass application and pass renewal
• Maintain employees’ leave record and medical claims
• Maintain, upkeep company & departmental documentation of operational policy, rules and regulation
• Maintain, upkeep and participate in ISO, BizSafe and other required certifications in Construction Sector
• Communicate with the accommodation for foreign employees
• Assist in administration duties when required and other ad hoc duties as assigned

Requirements:

• Diploma in HRM or its equivalent education certificate
• At least 1 year of relevant working experience in the related field
• Good understanding of human resources functions
• Able to exercise mature discretion on confidential issues
• Possess excellent Verbal and Communication Skills with good interpersonal skills
• Computer literate with strong proficiency in Microsoft Office applications
• Good knowledge of Employment Act, MOM regulations and practices
• Positive attitude, fast and independent with strong organizational skills
• Self-motivated and able to work under pressure
• Ability to multi-task and work independently in a fast-paced environment

Job description

· Prepare tender and contract documents, including bills of quantities material quantity and take off.

· Assist in establishing a client's requirements and coordinate quality controls to ensure deliverables meet requirements.

· Advise on a procurement strategy.

· Prepare, analyse and track expenses and costing for tenders and projects.

· Allocate work to subcontractors, suppliers, and ensure prompt and quality delivery through contractual obligations.

· Prepare and guide the project administrators to prepare monthly progress claims/value subcontracts payment claims / provide advice on contractual claims.

· Analyse outcomes and write detailed progress reports with the project team.

· To coordinate and liaise with consultants, clients, sub-contractors, and other parties involved for project specifications & other technical issues.

· Reviewing and verifying all architecture, civil & structural work, and ensure compliance with local construction regulations.

· Guide and instruct the project administrators to prepare method statements and presentations.

· Schedule regular meetings and record decisions (e.g. assigned tasks and next steps).

· Break projects into doable tasks and set timeframes and goals.

· Monitor project progress and address potential issues.

· Act as the point of contact for all participants.

· Identify potential projects set targets, and work with the commercial department to clinch project.

· Be involved in the process of work head applications.

· Other ad-hoc duties as assigned.

Requirements:

· Candidate must possess at least a degree in Quantity Surveying.

· 2 years or more of experience in Quantity Surveyor

· Prepare tender and contract documents, including bills of quantities of material quantity and take off.

· Good in analytical, communication, organizational and interpersonal skills

Creating and managing team schedules. In some cases, organizations have set hours for their entire workforce

Reporting to HR and senior management. Manager serve as a bridge between upper management and other employees

Bridge as an intermediate between client and company top management, and explain client needs to employee

We are an Electrical & Instrumentation Contractor specialising in installation works in Oil & Gas Plants, Pharmaceutical Plants, Wafer Fab, Commercial and Industrial Projects.

We being a SME company, you shall have good development Opportunities and chance for Outstanding career growth.

Job Description

• Must be a passionate and Energetic leader who is able to guide and manage the People
• Good understanding on Cost Control, Variations and Change Control
• Able to monitor and control procurement of materials in an orderly manner
• Able to Handle own and sub contractors people on site and timely control on handling complaints, settle disputes and grievances of personnel.
• Handle Clients for Business, Safety , Cost and Timely construction activities
• Has to Identify potential issues and resolve it before it becomes an issue

Requirements

• You must be well versed technically and practically with the Electrical installations and basic design as per Singapore Standards.
• You should adapt with RNC’s ISO systems (Quality and Safety) and be innovative to suggest improvisation in the system.
• Knowledgeable in Lighting, Small power, Earthing, Lightning Protection and ELV systems.
• Good Organisation skills, planning and Prioritizing works.
• Go-Getter mindset and good in communication.
• Responsible for actions of the Team on site.
• Minimum 3 year experience as a project manager.
• Proficient in MS Office (e.g Excel & Power Point).
• Possess good writing, communication and interpersonal skills.
• Working in a “Live” process plant is an added advantage.
• Knowledge on Instrumentation works shall be an added advantage.
• Class 3 Licence is an added advantage.

Roles and Responsibilities

• Facilitates HSE risk assessment conducted by the line management and ensures all necessary preventive measures against the identified hazards are implemented.
• Reports HSE incidents to the management and relevant stakeholders and takes appropriate actions.
• Facilitates, assists, and provides guidance on incident investigations to learn better ways for mitigating risks.
• Provides feedback to the management and employees on lessons learned and best practices from within their own unit and across project management.
• Supports the Site/HSE Manager in reporting progress with respect to the implementation of the project-level HSE objectives and Key Performance Indicators (KPIs), as required.
• Assists the line managers and supervisors in understanding their obligations, liabilities, and requirements for role fulfillment, as per local HSE laws and project-specific requirements.
• Supports and drives behavioral change through the local implementation of project specific performance improvement programs and practices.
• Supports and embeds an exemplary health and safety culture with a strong focus on the environment across their respective organization.
• Ensures that the appropriate HSE-related equipment and tools are available and used effectively.
• Contributes to and/or plans and executes HSE-related projects.
• Develops project objectives and reports the progress to management.

Qualification Requirements

• Registered as a Workplace Safety and Health Officer (WSHO) with the Ministry of Manpower (MOM).
• Project Workplace Safety and Health Officers (WSHO) with at least eight (8) years’ experience in industrial buildings and process plant construction projects.

Job Description

• To fetch and send workers
• Deliver part/material to site
• Assist in loading and unloading of goods
• Other ad hoc duties assigned

Requirements

• Preferably Class 3 & 4 License
• Have atleast 5 years driving expecience
• Able to work night shift

Interested candidates please send your resume to [email protected] . Only short listed will be interviewed.

RESPONSIBILITIES & DUTIES:

• To review all Authority's and Contractor's drawings

• To provide all relevant endorsements required by the relevant authorities

• Supervise all civil, structural and geotechnical building works, both permanent and temporary

• To ensure that contractor had obtained all necessary permits and clearance to work

• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures

• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works

• To review, evaluate and assess all formwork structure, formwork support systems etc

• To review and supervise safety, environmental and health matters

• To supervise the installation of instrumentation

• To supervise sanitary and plumbing installations, pump drainage works etc

• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations

• To review Contractor's design and supervise all works

QUALIFICATIONS & REQUIREMENTS:

• Min. 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

• Diploma in Civil and Structural Engineering

• Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Any interested candicate please forward your resume to [email protected].

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

• Take off quantity during tendering process
• Source for subcontractors and suppliers and evaluate quotations
• Support and prepare tender submission
• Pre-contracts, In-contracts & Post-contracts administrations
• Prepare periodic progress & variations claims
• Evaluate subcontractors claims
• Resolution of any contractual issues arising from the projects
• Recognized Diploma in Quantity Surveying or equivalent
• Possess good analytical and communication skills
• 5-day work week

Responsibilities:

• Oversee all project activities, including cost management, project schedule, staff development, site safety (together with safety manager) and security.
• Liaise with clients, consultants, sub-contractors, suppliers etc
• Plan, schedule, monitor, and update the project to meet targets.
• Resolve design-related issues during construction.
• Responsible for all construction site matters including safety and other compliance matters
• Ensure the smooth completion of the project

Requirements:

• Minimum 5-10 years of relevant experience in the construction (preferably gas piping) industry
• M & E Experience
• Independent, strong analytical and possess good interpersonal skills

Key Responsibilities:

· Sourcing suppliers, and comparing price and quality to ensure the best deal.

· Purchase goods, materials, components or services

· Support the purchasing function and other relevant departments and communicate any supply problems which may impact on business operations.

· Act as an interface between suppliers and other relevant departments on purchasing processes and new projects and activities.

· Monitor and advise on any issues which present risk or opportunity to the organisation.

· Liaising with suppliers on the delivery and warehouse teams to ensure goods are received on time.

· Monitor market trends, provide analysis on costs.

· Prepare reports and updates as and when required.

· Work closely with others in the procurement function.

· Negotiate contracts, improve prices and terms of business with suppliers and review opportunities to make business savings utilising negotiation and procurement best practice tools and methods.

· Prepare and raise purchase orders and blanket order.

· Build, maintain and manage supplier relationships and keep up good communications.

· Ensure that a professional and consistent approach is taken in relation to all supplier relationships.

· Ensure compliance to company guidelines, purchasing policies and procedures during supplier negotiations and contracts award process.

· Conduct research for new components and suppliers.

· Compile data relating to supplier performance to enable evaluation.

· Assess and evaluate suppliers and contribute to performance reviews to ensure contract compliance.

· Contact suppliers to resolve price, quality, delivery or invoice issues.

· Other task assigned by Procurement Manager/General Manager.

Purchaser Requirements

• O Level, diploma in business, logistics, or a related field may be required.
• Previous experience in a similar position.
• Superb written and verbal communication and negotiation skills.
• Great organizational and planning skills.
• The ability to identify market trends and make decisions in a high-stress environment.
• Negotiation skills, Analytical skills, Interpersonal skills

• Answering customer questions, providing information, taking and processing orders and addressing complaints.
• Co-ordinating with project sites and office support activities.
• Assist with filing, scanning and photocopying of documents
• Compiling and maintaining records of business transactions.
• Any other ad-hoc duties as required.
• Positive attitude, pro-active in working, able to work independently.

Key Responsibilities and Requirements:

• At least 1 year of Sales experience within the interior construction sector.
• With presentations and time management skills.
• Diploma / certification in any of the following: Architecture, Interior Design, Project/construction management, Marketing Management or related building construction/ M&E studies, Marketing Management.
• Familiar with, electrical, Celling partition work, carpentry, Tilling work, Awning work, renovation works and fit-out works.
• Experience in managing multiple projects.
• Positive, commitment and “can-do” attitude.
• High integrity, good team player, keen desire to learn, contribute, advance and progress with the company.
• Delivering business/Market share in collaboration with Zonal Sales teams for the year/quarter/month
• Salary+Sales Commission+Yearly Bonus
• Responsible to lead development and implementation of key strategic marketing initiatives for Singapore comprising of PQ, CPC, PDA and Bussmann in order to achieve the Sales Revenue growth in Singapore year on year
• Coordinating market analyses with sales team members and defining appropriate forecasts and plans
• Driving sales efficiency by delivering appropriate product knowledge information and training for each salesperson
• All works Monitoring with subcontractor and handover to clients.
• Monitoring Payment

Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

Job Description & Requirements

• Required 05+ years of experience in the Marine industry

• Required Class 4 Driver Skill and Supervisor skill in Marine industry

• Strong knowledge of marine coatings and painting material

• Effective communication and teamwork skills

• To Review Daily work progress and make a necessary change in order to meet Good KPI

• To check and conduct daily Tool Box meeting with workforce and monitor daily onsite to ensure all works are done safely and productively.

• To Collaborate with other shipyard personnel, including welders, fabricators, and supervisors, to coordinate painting activities and meet project timelines.

• The Supervisor will oversee all painting and coating-related activities, including grit blasting, surface preparation, and mixing and applying various types of marine-grade primers and paints.

• The Supervisor will ensure the quality of work, proper material application, and compliance with regulatory requirements.

• Familiarity with painting equipment, such as spray guns, compressors, and airless sprayers.

• Use spray guns, brushes, and rollers to apply marine coatings, including epoxy, enamel, and anti-corrosive paints

• Follow established safety protocols and procedures to prevent accidents and injuries.

• Required 05+ years of experience in the Marine industry

• Required Class 4 Driver Skill and Supervisor skill in Marine industry

• Strong knowledge of marine coatings and painting material

• Effective communication and teamwork skills

• To Review Daily work progress and make a necessary change in order to meet Good KPI

• To check and conduct daily Tool Box meeting with workforce and monitor daily onsite to ensure all works are done safely and productively.

• To Collaborate with other shipyard personnel, including welders, fabricators, and supervisors, to coordinate painting activities and meet project timelines.

• The Supervisor will oversee all painting and coating-related activities, including grit blasting, surface preparation, and mixing and applying various types of marine-grade primers and paints.

• The Supervisor will ensure the quality of work, proper material application, and compliance with regulatory requirements.

• Familiarity with painting equipment, such as spray guns, compressors, and airless sprayers.

• Use spray guns, brushes, and rollers to apply marine coatings, including epoxy, enamel, and anti-corrosive paints

• Follow established safety protocols and procedures to prevent accidents and injuries.

Responsibilities

- Prepare BIM Model, Shop drawings, Plan & Section drawings of HVAC related according to client’s requirements.

- Coordinate with main-contractor’s draft person (3D modeler) for ensuring that all arising matters while establishing

and coordinating the HVAC drawing with other MEP drawings are resolved for smooth combination to the overall

CSD requirements.

- Report and update BIM progress whenever required.

Jobskill / Experience

- Min 3 Year(s) of working experience in ACMV/HVAC Field is preferred.

- Knowledgeable in CP83 Local CAD Standard, AutoCAD 2D, duct and piping layout and schematic drawings,

knowledge of 3D BIM Modelling (Revit is a MUST), MEP, MicroStation and Navisworks is a plus.

- Knowledge of applicable codes, policies, standards, and best practices.

Qualification

Nitec relevant certificate or Higher Certificate in Drafting, Diploma Holder in Building Services or Mechanical & Electrical Services

Our Company involves in Design & Installation of ACMV System field for 33 years, majority in Pharmaceutical/Chemical/Oil&Gas/Flavour & Fragrance industries. We are currently looking out for Project Engineers to join our team.

Qualification

Degree / Diploma in Mechanical / Building Services or equivalent

Experience

Min 2 Year(s) of working experience in HVAC or Building Services preferred.

Roles & Responsibilities

. Site supervision of Project progress & liaise with

Clients/Consultants/Subcontractor/Workers

· Review project plans and specifications to ensure that the HVAC system design meets the required standards,

codes and regulations

· Select the appropriate HVAC equipment, materials, and component that meets the project requirements.

· Check site installation work as per approved drawings

· Understand and able to prepare the standard detail drawing to suit the respective project & shop drawings

· Check and follow up closely the daily site installation progress and able to take immediate action to tackle the delay.

· Able to liaise with different vendors and sub-contractors for different types of materials to be proposed and

submit for approval and subsequently procure them upon approved.

· Assist Project Manager to oversee overall project progress, manpower and monitor project schedule

Organizational Relationships: • Reports directly to Project Director.

Authorities: In charge of planning, executing, and finalizing projects according to strict deadlines and within budget. This includes acquiring resources and coordinating the efforts of team members and third-party contractors or consultants in order to deliver projects according to plan. In addition, the Project Manager will also define the project’s objectives and oversee quality control throughout its life cycle.

Responsibilities:

1. Typical duties will include but not be limited to the preparation and/or modification of the following:

• Civil/Structural engineering plans, design, and layout.
• Civil/Structural project specifications.
• Civil/Structural engineering portion of project proposals.
• Civil/Structural engineering portion of project cost estimates.

2. Provide drawing for own designs and produce sketches to incorporate in drawings by drafters.

3. Develop probable construction cost estimates for projects.

4. Use computer-assisted engineering design and software and equipment to prepare engineering design documents.

5. Perform field activities such as observe and record existing field conditions, take and verify measurements within project

area.

6. Direct and manage project development from beginning to end.

7. Define project scope, goals and deliverables that support business goals in collaboration with senior management and

stakeholders.

8. Develop full-scale project plans and associated communications documents.

9. Effectively communicate project expectations to team members and stakeholders in a timely and clear fashion.

10. Liaise with project stakeholders on an ongoing basis.

11. Estimate the resources and participants needed to achieve project goals.

12. Draft and submit budget proposals, and recommend subsequent budget changes where necessary.

13. Where required, negotiate with other department managers for the acquisition of required personnel from within the

company.

14. Determine and assess need for additional staff and/or consultants and make the appropriate recruitments if necessary

during project cycle.

15. Set and continually manage project expectations with team members and other stakeholders.

16. Delegate tasks and responsibilities to appropriate personnel.

17. Identify and resolve issues and conflicts within the project team.

18. Identify and manage project dependencies and critical path.

19. Plan and schedule project timelines and milestones using appropriate tools.

20. Track project milestones and deliverables.

21. Develop and deliver progress reports, proposals, requirements documentation, and presentations.

22. Proactively manage changes in project scope, identify potential crises, and devise contingency plans.

23. To carry out any tasks that is required by Management and as assigned for upholding the ISO 9001: 2008 and OHSAS

18001:2007 Intergrated Management System.

Qualifications:

1. Educational Qualification: Bachelor Degree in Civil Engineering or equivalent.

2. Relevant Experience: 2 years in project management, with special focus on structural engineering.

3. Computer Literacy: Advanced experience with Microsoft Office, AutoCad and StruCad and Project Management software.

Competency Requirements:

In a multicultural environment / work force, the incumbent should:

• be proficient in English
• have strong interpersonal skills, including written and oral communication skills.
• be persuasive, encouraging, and motivating.
• possess the ability to defuse tension among project team, should it arise.
• possess the ability to effectively prioritize and execute tasks in a high-pressure environment is crucial.
• possess the ability to read communication styles of team members and contractors who come from a broad spectrum of disciplines.
• possess the ability to shift priorities, demands and timelines through analytical and problem-solving capabilities.
• react to project adjustments and alterations promptly and efficiently.
• possess the ability to elicit cooperation from a wide variety of sources, including upper management, clients, and other departments.

Roles & Responsibilities

Requirements:

• Candidate must possess at least a Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering or equivalent.
• At least 7 Years) Working experience in the related field is required for this position.
• Required Skill(s): Project Management
• Preferably, a Manager specialized in Engineering - Civil/Construction/Structural or equivalent.
• Singaporean/SPR

Responsibilities:

• Monitor and manage the day-to-day operations of the project, or function, including developing and monitoring budgets, coordinating activities with other subcontractors
• Handle contractual matters that arise
• Check drawings and quantities and ensure that these are accurate for the execution
• Oversee the selection and requisition of materials required at the site.
• Plan the work schedule and efficiently organize the site facilities to meet an agreed program of deadlines;
• Liaise with consultants and/or sub-contractors engaged in the project;
• Attend regular meetings with owner/client/contractors/sub-con and ensure the progress is on schedule;
• Oversee quality control and safety matters on the site;
• Resolve any unexpected technical difficulties and other problems that may arise
• Overall responsible for the execution of the projects
• Monitor the cash flow and budgeting of the project
• Accountable for the project’s projected profit
• Identify and comply with all applicable statutory/regulatory requirements for the project under his/her jurisdiction.
• Monitor work progress to ensure the project stays on schedule.
• Ensure in-progress inspection and joint inspection Monitor work progress to ensure the project stays on schedule.
• Carry out in-progress inspection and joint inspection
• Conduct safety and environmental risk assessment of projects handled
• Ensure staff work in a safe and orderly manner
• Ensure toolbox meetings are carried out for the project.
• Identify QEOHS training needs of subordinates

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Join Our Growing Team!

The SKYLINK Group is a premier all-in-one mobility solution provider for retail sales of passenger cars and commercial vehicles, all vehicle leasing, Motor insurance, credit Hire Purchase financing, Motor workshop with full capacity of MRO (Maintenance, Repair and Overhaul) services, and vehicle body engineering works for all commercial and passenger vehicles.

Since 2017, SKYLINK Group has been rapidly expanding its offerings and fleet. We have served over 5,000 corporate customers including major industry leaders in logistics, distribution, F&B, marine, construction, sanitation, and government services.

With a commitment to fleet modernization, we have expanded our offerings to EV and Hybrid vehicles, and continuously aspire to provide greater value to our customers.

Be a part of the SKYLINK family and kick-start your career growth and progression in the mobility space today.

Job Description

• Customer engagement to identify their preferences and requirements for commercial vehicle leasing and sales
• Source for new corporate accounts, including SME, MNC, Independent Contractors, and Fleet Operators
• Facilitate test drive, vehicle introduction, and handover.
• Provide comprehensive information about pricing, leasing, sales, or vehicle information to customers/corporates
• Provide customer service, service recovery, and follow-ups on assigned corporate accounts
• Assist with documentation submission for sales and leasing requirements
• Develop professional knowledge in automotive (commercial) leasing/sales regulations and safety and vehicle knowledge
• Achieve and exceed assigned sales targets
• Prepare and compile weekly sales activities and reports for management

Requirements

• Min GCE 'O' Level or equivalent qualifications
• Valid class 3 driving license (Mandatory)
• Prior 1-5 years experience in insurance, retail, real estate or automotive trade preferred
• A strong passion for the automotive/motoring industry
• Outspoken, strong communication skills, and good listening ears
• Presentable outlook, good phone mannerisms, willing to learn
• Able to function independently, and also able to work with other team members
• Good Spoken English, able to converse in Mandarin as to liaise with our China base counterpart

Benefits

• Basic Salary + Structure Commission + Monthly Incentives
• Convenient working location, West (Bukit Batok).
• Medical, Dental & Insurance Coverage.
• Comprehensive Training Provided.
• Regular company activities & bonding sessions.

Job Responsibilities:

• Liaise with the Main contractors on the planning and progress of M&E work to meet the project schedule
• Supervise M&E works to ensure it adhere to specifications, are completed on schedule, within budget, and accurately documented.
• Undertake additional tasks as required to support operational needs and project requirements.

Requirements:

• Background in M&E works. Diploma in Civil/Mechanical Engineering/ relevant on-job experience is a plus.
• Minimum 5 years of working experience in similar role within the construction industry
• Strong building M&E knowledge with hands-on experiences.
• Knowledge in design and building project and relevant code of practice.
• 6 day workweek. Shift work might be required during critical phase.
• Willing to work on-site