Job Description & Requirements

NACT Engineering provides drones accessories for all sizes and use-cases. Our intimate knowledge of robotics systems places us at the forefront of a burgeoning mechanical revolution. As a company at the cutting edge of engineering and robotics, we are looking for a suitable candidate that will push NACT forward as a bespoke drone solutions provider for our clients in the APAC region.

Highlights of working at NACT

• Close proximity to many amenties along alexander road
• Competitive compensation package remunerated based on skill and experience.
• High level of autonomy on the job with training opportunities provided for upskilling and learning
• Open culture and collaborative environment
• High growth industry

Job description

• Continuously update the IOT standalone GUI, and write manual documentation for the team to adopt.
• Work with electronics and full stack engineer to create a bidirectional data transfer, to create web based GUI to display robot product status
• Conduct troubleshooting of IOT controlled robotics system to verify the cause of failures, and assist in arriving at the corresponding solution.
• Ensure compliance with company programs procedures and applicable quality system regulations and standards.

Position Responsibilities

• Work on Single Board Computer to implement sensors and calculations to enable robotic functions
• Independently perform some level of failure analysis.
• Supports equipment development efforts for new products, and process improvements. These efforts may be the internal development of process equipment or coordination with an external equipment integration company.
• Supports processes. This support might include daily support of production operations as well as leading reliability and yield improvement activities for the IOT product.
• May be expected to work on complex problems where analysis of situations or data requires an evaluation of many tangible and intangible factors. Individual will be required at times to make complex technical recommendations on design quality and reliability.
• Writes Process Specifications and Manuals when applicable.
• Supports Return Merchandise Authorization process by providing root cause analysis report.
• Collaborates with Technical Experts from other software/hardware partners to implement new Product/ Process activities across the facilities following Technology Roadmaps and Design Engineering activities.
• Performs other position related duties as assigned.

Quality Responsibilities

• Reports any observed or informed process and/or product non-conformities.
• Finds resolution of Quality Situations at the area of responsibility.
• Complies with all the requirements in the operational procedures at the area of responsibility in order to meet the requirements of all applicable Quality System regulations.

About the role

As a Construction Manager, you'll play a crucial role in overseeing the successful delivery of complex construction projects. Reporting to the senior project management team, you'll be responsible for managing all aspects of construction, from planning and budgeting to supervising on-site operations and ensuring compliance with safety regulations. This full-time position offers the opportunity to work on a variety of high-profile projects within the construction industry.

What you'll be doing

• Develop and implement detailed project plans, managing timelines, budgets, and resources to ensure successful and timely project completion
• Oversee and coordinate the work of contractors, subcontractors, and other project stakeholders to ensure seamless collaboration and efficient workflow
• Monitor construction progress, identifying and resolving any issues or risks that arise
• Ensure compliance with all relevant building codes, safety regulations, and company policies
• Collaborate with the design and engineering teams to provide input and resolve technical challenges
• Prepare and present progress reports to senior management, communicating project status, challenges, and mitigation strategies
• Assist with the development and implementation of quality control measures to maintain high standards of workmanship
• Mentor and provide guidance to junior members of the construction team

What we're looking for

• Minimum 8 years of experience in a construction management role, preferably within the commercial or residential construction sector
• Proven track record of successfully managing complex construction projects from start to finish
• Thorough understanding of construction methods, building codes, and safety regulations
• Excellent problem-solving and decision-making skills, with the ability to think critically and adapt to changing circumstances
• Strong project management and organisational skills, with the ability to prioritise and multitask effectively
• Excellent communication and interpersonal skills, with the ability to effectively liaise with a diverse range of stakeholders
• Proficient in using project management software and other relevant construction industry tools
• Degree in Construction Management, Engineering, or a related field is preferred

SERVICE TECHNICIAN (5 Day / West)

Job Type : Full-Time

• Travel Opportunity
• Training Provided
• 5 Days Work Week

Responsibilities :

• Have a passion to carry out trouble-shooting and maintenance works.
• Love the satisfaction after solving difficult machines.
• Willing to do hands-on work
• Willing to do brazing work
• Any other adhoc duties as assigned

Requirements :

• Candidate must possess at least Secondary School / "O" Level, Professional Certificate / NiTEC, Diploma / Advanced / Higher / Graduate Diploma in Engineering (Industrial), Engineering (Mechanical), Engineering (Mechatronic / Electromechanical) or equivalent.
• Required Language(s) : English
• Required Skill(s) : Aircon, Refrigeration, Chiller, Mechanical, Vacuum Pumps, Water Pumps, Scrubbers or Chillers.
• Able to travel on short notice
• Possess valid driving license (optional)
• Only Singaporean / SPR / Malaysian may apply.

Interested candidates who wish to apply for the advertised position, please send to us your resume via APPLY NOW

Email : [email protected]

We regret that only shortlisted candidates will be notified.

Administrative work:

· Heavy emphasis on ability to multi-task while focusing on time-sensitive matters.

· Liaise with suppliers/ main contractors using calls, emails and WhatsApp.

· Paperwork: update project team Microsoft Excel records/ prepare Variation Orders on Excel for Project Engineers

· Prepare, follow-up, update company and customers on the quotation/ work done/ payment status.

· QC invoices, verify and submit for next workflow.

· Other ad-hoc duties assigned.

· Positive and pro-active attitude towards learning.

Technical knowledge & skills to acquire while on the job (would be a bonus if candidate is relevantly experienced):

· Decent command of English.

· Basic standards of the usual office computer software (Office, Outlook, Excel etc)

· (BONUS: Basic technical knowledge on ACMV systems.)

· (BONUS: Comfortable with reading CAD and using relevant software.)

· Fresh entry job-seekers are welcome to apply! (We look out for candidates with high personal and job ethics rather than education and job experience)

Extra Info:

· Mondays - Fridays 8.30am-5.30pm - Office (Flexible work arrangements negotiable such as WFH after probation and when employee meets certain job requirements, ensuring smooth operations)

· Saturdays 8.30am-12.30pm

· Work location - Ang Mo Kio Industrial Park 2A

Roles & Responsibilities

• Monitor and evaluate all on-going projects; ensure that all works in progress are in-line with the proposed work schedules and budget.
• Develop a growth strategy focused both on financial gain and customer satisfaction
• Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines be involved in the project conceptualizing stage, developing and facilitating action plan to ensure coherence in planning parameters for facilities, timely execution of planning/action, manage and work closely with panel of external consultants and contractor.
• The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.
• Build long-term relationships with new and existing customers
• Developing goals for the development team and business growth and ensuring they are met.
• Training personnel and helping team members develop their skills.
• Finding and developing new markets and improving sales.
• Perform any other duties assigned by the director.

Requirements

• Relevant Qualification
• Market knowledge
• Communication and negotiation skills
• Ability to build rapport
• Time management and planning skills
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Job Description

Reporting to the Finance Manager, the Accounts Payable Accountant plays an integral role in Finance Division and will be responsible for leading a team in invoice to pay activities, support Manager in the end to end Procure-to-Pay improvements initiatives and ensure they align with company-wide transformation initiatives and Finance Division roadmap.

Responsibilities

1. Team lead and manage end to end Accounts Payable function

2. Review and approve invoices or journals for payment processing

3. Monitor accounts to ensure payments are up to date

4. Review vendor reconciliation

5. Prepare analysis for monthly updates of team’s performance to CFO

6. Prepare monthly reports such as AP ageing, GRIR etc

7. Handle month end & yearend closing activities such as accruals, adjustments, recharge

8. Handle withholding Tax filing

9. Correspond with external vendors on their enquiries and assist in vendor dispute resolution

10. Liaise with internal / external auditors for matters pertaining to Accounts Payable

11. Identify, initiate and lead Procure-to-Pay improvement initiatives to enhance business productivity and ensure it align with company-wide transformation, digitalization and automation initiatives and Finance Division roadmap

12. Undertake any other ad-hoc initiatives or tasks as assigned by management

Requirements

1. Degree in Accounting, ACCA or related field

2. At least 2 years of relevant experience in Accounts Payable, leading teams and leading improvement initiatives

3. Knowledge of SAP S/4 HANA, SAP ECC 6.0 or Tableau will be an advantage

4. Knowledge of general accounting procedures and financial reporting will be a plus

5. Good communications and problem-solving skills

6. Ability to meet deadlines

7. Ability to multi-task and prioritize in a fast paced and high transactional volume environment or ambiguous situations

SIAEC is proud to have received the 2024 'Gold Standard in Excellence in Talent Management & Acquisition Award' from the Singapore Human Resources Institute.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Candidates are not required to pay SIA Engineering, any Agents, or Sub-Agents representing the organisation a recruitment fee or other fees relating to their application / employment.

Responsibilities:

• To cover design aspects for systems such as Radars, Navigation Comms, Integrated Comms, Integrated Combat Systems and Layout designs
• Work with other trades on integration design between Platform and Systems
• To prepare the General Arrangement Plan (GAP)
• Preparation of tender proposal and technical specifications for tender submission
• Establish Major Equipment Specifications and Selections
• To check and ensure equipment specification, technical information, functional description document, installation control document and interface design specification are correct and properly maintained, disseminate and use for the preparation of design work activities
• Planning and control of Basic design document schedule to support project milestone
• To develop of new designs and design concepts;
• To source for new design tools;
• To provide specialist technical assessment and analysis other in-house departments and external parties
• To continue updating the developing and expanding of the design database
• To participate in tests and sea trials, including HAT and SAT, where required
• Perform detail design calculation where necessary
• To follow up and resolve all the design issues raised by Owner, Classification and Statutory Authorities on all design documents promptly and timely to support the schedule, including on site checking and discussions
• To generate 2D arrangement drawings for major equipment
• To generate list of design drawing / document specific to each project
• To check working drawings and ensure that they conform to contractual technical specification, installation control documents, Classification and Statutory Rules/Regulations
• To keep abreast with current technological developments and products, Classification rules, military and industrial standards and other standards relevant to design activities.

Requirements:

• Degree in Electrical & Electronics Engineering
• 3 to 5 years of relevant experience in Marine related projects on Navigation Communications Systems and Radars (Fire Contol & Surveillance) will be advantageous
• Possess both project management and man management experience
• Ability to manage external and internal stakeholders will be critical for this role
• Proficiency in AutoCAD
• Only Singaporeans will be considered for this role

Additional Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Responsibilities:

Project Oversight

• Oversee the planning, execution, and completion of building/critical facilities power management construction projects.
• Manage project planning, cost control, scheduling, and documentation.
• Ensure all projects meet safety compliance, are delivered within budget, and are signed off by clients.
• Liaise with internal and external stakeholders to maintain strong relationships and address project requirements.
• Resolve operational and technical project issues promptly to prevent disruptions.

Resource and Cost Management

• Monitor and improve the operational systems, processes, and infrastructure to ensure smooth functioning and efficiency across all areas of the organization.
• Ensure that building/facilities management operations run efficiently, meeting both the immediate and long-term goals.
• Develop and implement operational strategies that align with the organization's business goals.
• Create and execute plans for managing day-to-day operations, including resource allocation, staffing, logistics, and workflow processes, ensuring optimal utilization to meet project deadlines and quality standards.

Safety and Compliance

• Maintain a safe and clean worksite environment, complying with ISO and OSHA standards.
• Prioritize workplace safety and cleanliness, handling emergencies and incidents effectively.
• Address operational issues, including facility management problems, supply chain disruptions, or technical challenges, ensuring minimal disruption to the business.
• Respond to crises (e.g., system failures, accidents) promptly and develop contingency plans to prevent recurrence.

Operational Excellence

• Develop strategies and metrics to ensure team performance aligns with company standards.
• Manage logistics to ensure accurate delivery and accountability of materials.
• Track project developments through detailed documentation of processes and milestones.
• Stay informed on industry trends and best practices, integrating them into operations.
• Develop and manage operational budgets for multiple projects and departments, ensuring that cost control measures are in place.
• Continuously assess costs, identify potential savings, and maintain financial discipline while meeting the project requirements.
• Provide leadership, mentorship, and direction to cross-functional teams, ensuring that employees are motivated, trained, and supported in their roles.
• Foster a culture of continuous improvement and collaboration across departments.
• Regularly report on operational performance to senior management, highlighting achievements, challenges, and improvement opportunities.

Requirements:

• Tertiary Degree in a Construction/Building/Project Management/Electrical or Mechanical Engineering related field with at least 10 years of working experiences in the Construction projects.
• Good knowledge in Electrical (LV & HV) & Mechanical, knowledge in building/ critical facilities Power management, uninterruptible power supplies or standby generators are essential.
• A strong background in electrical equipment & power solutions sales in data centres will be highly preferred.
• Excellent knowledge of power protection technologies (e.g., DRUPS, UPS, diesel generators, modular power infrastructure solution).
• Capable of managing & coordinating sub-contractors/ suppliers/ vendors both on & off site to meet project deadlines.
• Exceptional leadership and people management skills.
• Sound knowledge of Project Management procedures.
• Ability to travel across the region (when required).

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to ref45(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Rachel Tang Sue Leng

EA Personnel Reg No: R24121588

Join Our Growing Team!

The SKYLINK Group is a premier all-in-one mobility solution provider for retail sales of passenger cars and commercial vehicles, all vehicle leasing, Motor insurance, credit Hire Purchase financing, Motor workshop with full capacity of MRO (Maintenance, Repair and Overhaul) services, and vehicle body engineering works for all commercial and passenger vehicles.

Since 2017, SKYLINK Group has been rapidly expanding its offerings and fleet. We have served over 5,000 corporate customers including major industry leaders in logistics, distribution, F&B, marine, construction, sanitation, and government services.

With a commitment to fleet modernization, we have expanded our offerings to EV and Hybrid vehicles, and continuously aspire to provide greater value to our customers.

Be a part of the SKYLINK family and kick-start your career growth and progression in the mobility space today.

Job Description

• Customer engagement to identify their preferences and requirements for commercial vehicle leasing and sales
• Source for new corporate accounts, including SME, MNC, Independent Contractors, and Fleet Operators
• Facilitate test drive, vehicle introduction, and handover.
• Provide comprehensive information about pricing, leasing, sales, or vehicle information to customers/corporates
• Provide customer service, service recovery, and follow-ups on assigned corporate accounts
• Assist with documentation submission for sales and leasing requirements
• Develop professional knowledge in automotive (commercial) leasing/sales regulations and safety and vehicle knowledge
• Achieve and exceed assigned sales targets
• Prepare and compile weekly sales activities and reports for management

Requirements

• Min GCE 'O' Level or equivalent qualifications
• Valid class 3 driving license (Mandatory)
• Prior 1-5 years experience in insurance, retail, real estate or automotive trade preferred
• A strong passion for the automotive/motoring industry
• Outspoken, strong communication skills, and good listening ears
• Presentable outlook, good phone mannerisms, willing to learn
• Able to function independently, and also able to work with other team members
• Good Spoken English, able to converse in Mandarin as to liaise with our China base counterpart

Benefits

• Basic Salary + Structure Commission + Monthly Incentives
• Convenient working location, West (Bukit Batok).
• Medical, Dental & Insurance Coverage.
• Comprehensive Training Provided.
• Regular company activities & bonding sessions.

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Responsibilities

- Prepare BIM Model, Shop drawings, Plan & Section drawings of HVAC related according to client’s requirements.

- Coordinate with main-contractor’s draft person (3D modeler) for ensuring that all arising matters while establishing

and coordinating the HVAC drawing with other MEP drawings are resolved for smooth combination to the overall

CSD requirements.

- Report and update BIM progress whenever required.

Jobskill / Experience

- Min 3 Year(s) of working experience in ACMV/HVAC Field is preferred.

- Knowledgeable in CP83 Local CAD Standard, AutoCAD 2D, duct and piping layout and schematic drawings,

knowledge of 3D BIM Modelling (Revit is a MUST), MEP, MicroStation and Navisworks is a plus.

- Knowledge of applicable codes, policies, standards, and best practices.

Qualification

Nitec relevant certificate or Higher Certificate in Drafting, Diploma Holder in Building Services or Mechanical & Electrical Services

Our Company involves in Design & Installation of ACMV System field for 33 years, majority in Pharmaceutical/Chemical/Oil&Gas/Flavour & Fragrance industries. We are currently looking out for Project Engineers to join our team.

Qualification

Degree / Diploma in Mechanical / Building Services or equivalent

Experience

Min 2 Year(s) of working experience in HVAC or Building Services preferred.

Roles & Responsibilities

. Site supervision of Project progress & liaise with

Clients/Consultants/Subcontractor/Workers

· Review project plans and specifications to ensure that the HVAC system design meets the required standards,

codes and regulations

· Select the appropriate HVAC equipment, materials, and component that meets the project requirements.

· Check site installation work as per approved drawings

· Understand and able to prepare the standard detail drawing to suit the respective project & shop drawings

· Check and follow up closely the daily site installation progress and able to take immediate action to tackle the delay.

· Able to liaise with different vendors and sub-contractors for different types of materials to be proposed and

submit for approval and subsequently procure them upon approved.

· Assist Project Manager to oversee overall project progress, manpower and monitor project schedule

Organizational Relationships: • Reports directly to Project Director.

Authorities: In charge of planning, executing, and finalizing projects according to strict deadlines and within budget. This includes acquiring resources and coordinating the efforts of team members and third-party contractors or consultants in order to deliver projects according to plan. In addition, the Project Manager will also define the project’s objectives and oversee quality control throughout its life cycle.

Responsibilities:

1. Typical duties will include but not be limited to the preparation and/or modification of the following:

• Civil/Structural engineering plans, design, and layout.
• Civil/Structural project specifications.
• Civil/Structural engineering portion of project proposals.
• Civil/Structural engineering portion of project cost estimates.

2. Provide drawing for own designs and produce sketches to incorporate in drawings by drafters.

3. Develop probable construction cost estimates for projects.

4. Use computer-assisted engineering design and software and equipment to prepare engineering design documents.

5. Perform field activities such as observe and record existing field conditions, take and verify measurements within project

area.

6. Direct and manage project development from beginning to end.

7. Define project scope, goals and deliverables that support business goals in collaboration with senior management and

stakeholders.

8. Develop full-scale project plans and associated communications documents.

9. Effectively communicate project expectations to team members and stakeholders in a timely and clear fashion.

10. Liaise with project stakeholders on an ongoing basis.

11. Estimate the resources and participants needed to achieve project goals.

12. Draft and submit budget proposals, and recommend subsequent budget changes where necessary.

13. Where required, negotiate with other department managers for the acquisition of required personnel from within the

company.

14. Determine and assess need for additional staff and/or consultants and make the appropriate recruitments if necessary

during project cycle.

15. Set and continually manage project expectations with team members and other stakeholders.

16. Delegate tasks and responsibilities to appropriate personnel.

17. Identify and resolve issues and conflicts within the project team.

18. Identify and manage project dependencies and critical path.

19. Plan and schedule project timelines and milestones using appropriate tools.

20. Track project milestones and deliverables.

21. Develop and deliver progress reports, proposals, requirements documentation, and presentations.

22. Proactively manage changes in project scope, identify potential crises, and devise contingency plans.

23. To carry out any tasks that is required by Management and as assigned for upholding the ISO 9001: 2008 and OHSAS

18001:2007 Intergrated Management System.

Qualifications:

1. Educational Qualification: Bachelor Degree in Civil Engineering or equivalent.

2. Relevant Experience: 2 years in project management, with special focus on structural engineering.

3. Computer Literacy: Advanced experience with Microsoft Office, AutoCad and StruCad and Project Management software.

Competency Requirements:

In a multicultural environment / work force, the incumbent should:

• be proficient in English
• have strong interpersonal skills, including written and oral communication skills.
• be persuasive, encouraging, and motivating.
• possess the ability to defuse tension among project team, should it arise.
• possess the ability to effectively prioritize and execute tasks in a high-pressure environment is crucial.
• possess the ability to read communication styles of team members and contractors who come from a broad spectrum of disciplines.
• possess the ability to shift priorities, demands and timelines through analytical and problem-solving capabilities.
• react to project adjustments and alterations promptly and efficiently.
• possess the ability to elicit cooperation from a wide variety of sources, including upper management, clients, and other departments.

Roles & Responsibilities

Requirements:

• Candidate must possess at least a Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering or equivalent.
• At least 7 Years) Working experience in the related field is required for this position.
• Required Skill(s): Project Management
• Preferably, a Manager specialized in Engineering - Civil/Construction/Structural or equivalent.
• Singaporean/SPR

Responsibilities:

• Monitor and manage the day-to-day operations of the project, or function, including developing and monitoring budgets, coordinating activities with other subcontractors
• Handle contractual matters that arise
• Check drawings and quantities and ensure that these are accurate for the execution
• Oversee the selection and requisition of materials required at the site.
• Plan the work schedule and efficiently organize the site facilities to meet an agreed program of deadlines;
• Liaise with consultants and/or sub-contractors engaged in the project;
• Attend regular meetings with owner/client/contractors/sub-con and ensure the progress is on schedule;
• Oversee quality control and safety matters on the site;
• Resolve any unexpected technical difficulties and other problems that may arise
• Overall responsible for the execution of the projects
• Monitor the cash flow and budgeting of the project
• Accountable for the project’s projected profit
• Identify and comply with all applicable statutory/regulatory requirements for the project under his/her jurisdiction.
• Monitor work progress to ensure the project stays on schedule.
• Ensure in-progress inspection and joint inspection Monitor work progress to ensure the project stays on schedule.
• Carry out in-progress inspection and joint inspection
• Conduct safety and environmental risk assessment of projects handled
• Ensure staff work in a safe and orderly manner
• Ensure toolbox meetings are carried out for the project.
• Identify QEOHS training needs of subordinates

• Required 05+ years of experience in the Marine industry

• Required Class 4 Driver Skill and Supervisor skill in Marine industry

• Strong knowledge of marine coatings and painting material

• Effective communication and teamwork skills

• To Review Daily work progress and make a necessary change in order to meet Good KPI

• To check and conduct daily Tool Box meeting with workforce and monitor daily onsite to ensure all works are done safely and productively.

• To Collaborate with other shipyard personnel, including welders, fabricators, and supervisors, to coordinate painting activities and meet project timelines.

• The Supervisor will oversee all painting and coating-related activities, including grit blasting, surface preparation, and mixing and applying various types of marine-grade primers and paints.

• The Supervisor will ensure the quality of work, proper material application, and compliance with regulatory requirements.

• Familiarity with painting equipment, such as spray guns, compressors, and airless sprayers.

• Use spray guns, brushes, and rollers to apply marine coatings, including epoxy, enamel, and anti-corrosive paints

• Follow established safety protocols and procedures to prevent accidents and injuries.

Job Description & Requirements

• Required 05+ years of experience in the Marine industry

• Required Class 4 Driver Skill and Supervisor skill in Marine industry

• Strong knowledge of marine coatings and painting material

• Effective communication and teamwork skills

• To Review Daily work progress and make a necessary change in order to meet Good KPI

• To check and conduct daily Tool Box meeting with workforce and monitor daily onsite to ensure all works are done safely and productively.

• To Collaborate with other shipyard personnel, including welders, fabricators, and supervisors, to coordinate painting activities and meet project timelines.

• The Supervisor will oversee all painting and coating-related activities, including grit blasting, surface preparation, and mixing and applying various types of marine-grade primers and paints.

• The Supervisor will ensure the quality of work, proper material application, and compliance with regulatory requirements.

• Familiarity with painting equipment, such as spray guns, compressors, and airless sprayers.

• Use spray guns, brushes, and rollers to apply marine coatings, including epoxy, enamel, and anti-corrosive paints

• Follow established safety protocols and procedures to prevent accidents and injuries.

Architectural Engineer- job Posting

Position Overview: We are seeking a motivated and detail-oriented Project/Site Engineer for Architectural and Structural systems to assist in the supervision, coordination, and execution of construction projects. The ideal candidate will play an integral role in managing various site activities, ensuring quality control, and facilitating communication between internal teams, subcontractors, and clients.

Key Responsibilities:

· Assist in architectural system site supervision works, ensuring quality and progress.

· Coordinate project planning, documentation, and execution of works on-site.

· Oversee project works, manpower mobilization, material planning, and ordering.

· Communicate internally with various departments and externally with clients and subcontractors.

· Coordinate and follow-up on project submissions to authorities.

· Produce regular site progress reports and submit necessary documentation.

· Attend meetings and conduct site inspections to ensure quality control.

Additional Responsibilities:

· Manage all aspects of architectural system site works.

· Supervise manpower scheduling and deployment to meet project timelines.

· Ensure the timely completion and quality of subcontractor works.

· Prepare and submit method statements and other required reports.

· Review and monitor architectural and structural system drawings and approval statuses.

· Collaborate with project managers and stakeholders to resolve site issues.

Qualifications and Requirements:

· Minimum 1-5 years of experience in construction projects.

· Strong communication skills and ability to interact with people at all levels.

· Familiarity with project management processes across all project stages.

Responsibilities

• Design and implement electrical systems for construction projects.
• Prepare detailed project plans and specifications.
• Conduct site inspections to ensure compliance with electrical codes and standards.
• Troubleshoot and resolve electrical issues on-site.
• Coordinate with project managers, contractors, and other engineers.
• Ensure all electrical work is completed on time and within budget.
• Maintain accurate records of all electrical work performed.
• Provide technical support and guidance to other team members.
• Review and approve electrical designs and plans.
• Ensure all electrical systems are safe and operational.
• Conduct risk assessments and implement safety measures.
• Stay up-to-date with the latest electrical engineering technologies and practices.
• Prepare and present reports on project progress and electrical issues.
• Manage and supervise electrical contractors and subcontractors.
• Ensure compliance with all relevant regulations and standards.
• Participate in project meetings and provide input on electrical matters.
• Develop and implement maintenance schedules for electrical systems.
• Assist in the procurement of electrical materials and equipment.
• Provide raining and support to junior engineers and technicians.

Requirements

• Bachelor's degree or Diploma in Electrical Engineering or a related field.
• Minimum of 3 years of experience in electrical engineering

Job Scope:

• Working experience with metal Works
• Able to communicate and meet consultants requirement
• Monitor and control project material delivery in accordance to schedule
• Preparation of detail program for site team to follow accordingly and completion on time
• Manage and monitor site progress
• Any other duties to be assigned

Requirements:

• Good working attitude, committed and ability to meet tight schedules.
• Solid organization skills including attention to details and multi-tasking skills.
• Excellent spoken and written communication skills.
• Minimum 3 years of working experience in Project Management in residential, government and commercial building projects (preferable in Building metal Work).
• Candidate must possess at least Diploma and/or Degree in Civil Engineering and or related field with relevant experience

Roles & Responsibilities

Job Responsibilities:

• To repair bins, fabricate bins, welding of the bins and support on all mechanical equipment, pumps, conveyors, gearbox and etc in plant as per schedule and upon breakdown
• To do in house welding, fabrication and plumbing works as per requirements by operation
• Attend any mechanical breakdown immediately and to run back the plant
• Installation, modification and fabrication of new equipment & machines in plant needed by operation
• To minimize equipment break down and down time, by doing proper and effective maintenance & repairs by problem identification & problem solving
• Other ad-hoc duties as assigned

Requirements

• At least 2 years of relevant experience
• Possess TIG welding experience is a plus point

Roles & Responsibilities:

• Follow blueprints and building plans to meet the needs of clients

• Install structures and fixtures, such as windows and molding

• Measure, cut, and shape wood, plastic, and other materials

• Construct building frameworks, including walls, floors, and doorframes

• Good at fabrication kitchen cabinet

• fully operate the production

• Able to work in a team

• Hardworking and willing to accept new ideas

• Skillful

• Knowledgeable

• Dedicated to job

• Positive mind set

• Working attitude

• Productivity

• Able to work with long hours and public holiday

Job Purpose:

We are seeking a highly skilled and experienced Project Manager to oversee the successful planning, execution, and completion of M&E EPC and EPCM projects. The Project Manager will be responsible for managing all aspects of the project lifecycle, including scope, schedule, budget, and quality control. The ideal candidate will have a strong background in mechanical & electrical engineering and cleanroom construction with a proven track record of delivering complex projects on time and within budget.

Key Responsibilities:

1. Project Planning and Execution:

• Lead the end-to-end management of M&E EPC and EPCM projects, ensuring that all project objectives are met in accordance with contractual agreements and company standards.
  • Develop comprehensive project plans, including scope definition, timelines, resource allocation, risk assessments, and budget estimates.
  • Ensure effective coordination and management of engineering, procurement, construction, and commissioning activities.
  • Monitor and control project progress, implementing corrective actions when necessary to keep the project on track.

2. Budget and Cost Management:

• Manage project budgets, ensuring that all financial targets are met and that costs are controlled.
• Prepare and review financial reports, tracking expenditures, forecasts, and project profitability.
• Ensure effective cost management strategies to optimize project efficiency and profitability.

3. Team Leadership and Coordination:

• Lead and coordinate multidisciplinary teams of engineers, contractors, and subcontractors to ensure the timely delivery of projects.
• Provide leadership and guidance to project teams, fostering a collaborative and high-performance work environment.
• Ensure effective communication between project teams, stakeholders, and senior management to ensure alignment with project goals.

4. Risk Management and Compliance:

• Identify project risks and develop risk mitigation strategies to ensure successful project delivery.
• Ensure compliance with health, safety, and environmental (HSE) regulations and company policies throughout the project lifecycle.
• Manage project changes, including scope adjustments, contract modifications, and stakeholder expectations.

5. Contract and Stakeholder Management:

• Manage relationships with clients, contractors, and other stakeholders, ensuring clear communication and successful project outcomes.
• Oversee contract negotiations, manage contractual obligations, and ensure all project deliverables are met in line with client expectations.

6. Quality Assurance and Control:

• Implement quality control processes to ensure all project deliverables meet or exceed industry standards and client expectations.
• Conduct regular site inspections to monitor progress, safety compliance, and adherence to project specifications.

7. Project Reporting:

• Prepare and present regular progress reports to senior management, clients, and stakeholders, providing updates on project status, risks, and milestones.
• Maintain accurate project documentation, including schedules, budgets, reports, and contracts

Key Requirements:

• Experience: Minimum 8-10 years of experience in project management within the M&E EPC/EPCM industry, with a proven track record of successfully managing large-scale engineering projects.
• Education: Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field. A Project Management Professional (PMP) or PRINCE2 certification is an advantage.
• Industry Knowledge: In-depth knowledge of M&E systems, including HVAC, electrical, and mechanical systems, process system, cleanroom system, as well as construction methodologies, codes, and standards.
• Project Management Skills: Strong proficiency in project scheduling, budgeting, risk management, and contract administration. Experience with MS Project or similar project management tools.
• Leadership: Excellent leadership and team management skills, with the ability to motivate and coordinate cross-functional teams.
• Communication: Strong verbal and written communication skills, with the ability to effectively communicate with clients, subcontractors, and team members.
• Problem-Solving: Strong analytical and problem-solving skills, with the ability to resolve complex project challenges and deliver high-quality results.
• Mobility: As and when needed.

Competencies:

• Excellent organizational skills and attention to detail.
• Ability to work under pressure and meet tight deadlines.
• High level of initiative and a proactive approach to project management.
• Strong negotiation and interpersonal skills.
• Further Training: CSCPM, Managing WAH, Bizsafe L2

• Assist in the preparation of tender documentation and pricing
• To take off quantity for tender and ongoing projects
• Updating and tracking of drawing to ensure timely information
• Submission for progress claim, quotation and VO submission
• Certify and evaluate progress work done, includes contract administration for variations for both main contract and subcontract works
• Assist to finalise project accounts
• Attend site meetings when required
• Responsible for related administrative and ad-hoc duties as assigned by management

Responsibilities:

• Negotiation to achieved cost saving driving towards KPI targeted set.
• Generate Purchase Orders and issue to vendors.
• Monitoring scheduled delivery dates and raising any related issues which might impact product quality and project timelines.
• Maintain and ensure procurement documentation is updated regularly in system (ERP).
• Send requisition and request quotation based on Requestor specification/ requirement.
• Negotiate pricing with vendors, per product knowledge justification.
• Monitor scheduled delivery dates and raise any related issues which might impact product quality and project timelines.
• Assist on non-conformance, provide administrative support related to payment issues, freight document verification and shipment arrangement to vendor for rejected goods, etc.
• Collaborate with vendors to rectify recurring supply and quality issues.
• Maintain and ensure procurement documentation is updated regularly. Example: Generate monthly purchased histories details, Saving, Delivery, RFQ, PO & etc
• Source for new/ alternate vendors to ensure the supply for KEY commodities.
• Prequalification of vendors (AVL).
• Run errands for self-collection/ delivery for standard part & fabrications secondary process.
• Support Senior Procurement and Procurement Executive on issue PO, data entry, data gathering and etc.

Requirements:

• Nitec/ Diploma holder in Engineering or a related field.
• Min 1 – 2 years of relevant experience, preferably in Precision/ Manufacturing Engineering environment.
• Fundamental knowledge of Supply Chain & Inventory Management.
• Able to interpret basic mechanical drawing preferred.
• Experience in Microsoft Excel, Word and Powerpoint for project management.
• Good Communication, negotiation, problem solving and sourcing skills.
• Experience in participating project management.

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!