Responsibilities:

· Creation of 3D Electrical Services model content and ensuring model quality control.

· Comply modelling requirements for the project, ensure timely deliveries of outcomes.

· Manage model data to facilitate model coordination between multiple disciplines.

· Comply with BIM execution plan requirements for the project.

· Work closely with design engineers and BIM Lead in preparing the CAD drawings / BIM models.

Requirements:

· Certificate from BCA BIM Modelling course or equivalent

· Degree / Diploma in Electrical Engineering

· Familiar with Singapore BCA BIM guidelines and authority submissions

· Good knowledge of AutoCAD, Revit & Naviswork Manage

· Experience in Electrical systems design and prepare drawings

· Understanding of Local code requirements for Electrical systems

· At least 2 years experiences in Singapore construction industry.

Responsibilities:

· Creation of 3D model content and ensuring model quality control.

· Comply modelling requirements for the project, ensure timely deliveries of outcomes.

· Manage model data to facilitate model coordination between multiple disciplines.

· Comply with BIM execution plan requirements for the project.

· Work closely with design engineers and BIM Lead in preparing the CAD drawings / BIM models.

Requirements:

· Certificate from BCA BIM Modelling course or equivalent

· Degree / Diploma in Engineering

· Familiar with Singapore BCA BIM guidelines and authority submissions

· Good knowledge of AutoCAD, Revit & Naviswork Manage

· Experience in M&E, PSG or Fire systems design and prepare drawings

· Understanding of Local code requirements for Electrical Systems

· At least 2 years experiences in Singapore construction industry.

Responsibilities:

· Responsible for hands-on training and supervision of site installation, testing and commissioning relating to Sanitary, Plumbing and Gas Services

· Coordinate daily work processes and methods

· Ensure implementation and enhancement of quality control on site.

Requirements

· ITC / NTC Certification

· Min 3 years working experiences in Sanitary, Plumbing & Gas Services

· Ability to work independently in a challenging and demanding environment.

Company requires Construction supervisor.

-Familiar with construction site.

-Knowledge of clean room facilities.

- Knowledge of Data center facilities setup

-Able to communicate with client and liase with workers.

-Read and understand schematic drawings.

- Hands on to demonstrate work to new site workers.

- Class 3 license preferred.

About the Company

Our Client is an innovator and leader in the mobility space.

Responsibilities

We’re looking for a Software Engineering Technical Lead to provide sound technical expertise in the design of backend architecture and systems to deliver impactful products to users.

• Lead backend architecture design, defining scope and optimising systems;
• Design functional flows and document critical requirements;
• Develop code and provide technical mentorship to team members;
• Resolve complex technical issues in a hands-on manner;
• Enforce best practices to ensure quality and security of code;
• Perform evaluations on existing systems to propose enhancements or mitigate risks;
• Work across functions and with internal stakeholders.

Requirements

• Degree in Computer Science or any relevant discipline;
• At least 6 to 8 years of experience in a technical role in backend development;
• Strong proficiency in multiple tech stacks;
• Hands-on experience in Agile software development;
• In-depth understanding of and experience in AWS;
• Strong problem-solving skills;
• Experience in various documentation tools;
• Good communication skills and ability to work cross-functionally.

Employment Details

• Permanent role;
• Hybrid work arrangement;
• Excellent remuneration and benefits.
• 
  

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

The incumbent leads Factory’s Engineering Manager in planning, coordinating, and overseeing engineering projects to ensure they are completed efficiently, on time, and within budget. This role requires a blend of technical expertise and leadership skills to drive innovation, improve processes, and ensure the successful execution of engineering initiatives. The incumbent is also responsible for mentoring team members and fostering a culture of collaboration and continuous improvement.

Responsibilities and Duties

The incumbent will assist in managing project deliverables and monitoring timeline. Incumbent will coordinate with respective stakeholder internal or external to ensure smooth completion of the project.

Document the process along the way. Manage and document full process flow of:

• Responsible for delivery success of assigned project.
• Work closely with internal stakeholder to ensure systems and procedures are compliance to the Organization’s Quality standards and Regulatory requirements.
• Sourcing for machinery/equipment/parts, conduct technical evaluation and submit propose for management review.
• Participate in Project Core Team meetings or Extended Team meetings to drive action to solutions.
• Organize project meeting and compile project status report to achieve project scope, schedule, resource and budget.
• Identify and manage project risks, implementing mitigation strategies to address potential delays or issues.
• Drive operational readiness to support development builds and trial manufacturing build. Conduct reviews and compile reports.
• Participate in new process development, optimize existing process, and implement technical breakthrough activities through Lean / Six Sigma methodology to reduce manufacturing costs and/or enhance manufacturing efficiency.
• Provide technical leadership and decision-making on complex engineering problems.
• Review and approve technical designs, drawings, and specifications to ensure alignment with project goals.
• Ensure the application of best practices, engineering standards, and state-of-the-art technologies in all projects.
• Continuously evaluate and improve engineering processes to enhance efficiency and productivity.
• Any other ad hoc responsibility tasked by the reporting Manager / Senior Management.

Qualifications & Requirements

• Degree and above / relevant Trade Certifications in Mechanical Engineer, Electrical Engineer, or Industrial Engineer or related
• 7 years working experience (with at least 3 years in managerial or leadership role) in FMCG manufacturing companies in a similar role preferred or relevant experience in leading medium to large scale projects involving process improvement or installation of new production line.
• Able to read, write and speak fluently in Chinese and English.
• Abel to communicate in Malay would be beneficial.

Specific Requirements

• Strong understanding of engineering principles, design, and project management methodologies.
• Strong communication skill.
• Knowledge in lean manufacturing, supply chain, quality standards/regulatory requirements will be added advantage.
• Project Management, Quality Focus, Database Design, analysing information etc.
• Efficiency in reporting research results, attentive to detail, emphasizing excellence in Innovation.
• Able to multi-task, meet deadlines with demonstrated ability to drive improvement.
• Proven track record of successfully managing engineering projects, including budgeting and resource allocation.
• Demonstrated strong ability to lead and drive meeting / discussion, communicate issues and resolve conflicts within cross functional teams.
• Good planning and organization skills, have strong analytical and problem-solving skills.
• Strong negotiation skill

As a Test Solutions Engineering NAND manager, you will coordinate a global team responsible for the development, debug and maintenance of test programs that help deliver Micron's world-class NAND portfolio to market. As we continue to navigate shift left and twelve-month cadence initiatives, it is imperative that we find common ground between wafer and component test steps, equipment and flows. You'll lead a team of NAND Probe, Burn, WLR, Test Learning Vehicle test engineers. A successful candidate must possess a growth mindset, demonstrate excellent interpersonal skills, and have a strong technical foundation in either test or product development. Success requires close collaboration with partners in Product Engineering, Manufacturing, Yield Enhancement, Global Quality, SIG, and Equipment Engineering teams to deliver the right test solution. Are you ready to take a world-class team to the next level?

Responsibilities

Drive for results

• Define a comprehensive test plan from NPI thru HVM phases; inclusive of capturing inputs from key partners; ensuring test hardware and programs are in place and aligned to project commitments
• Make efficient use of global test network; drive appropriate tasks across the global test team to ensure project progress and team member development
• Work closely with extended manufacturing network to ensure time to market, test time, capacity, and mature yield goals are on-track
• Adhere to Micron's core values and reinforce strong interactions within and outside of immediate team by demonstrating positive and professional behavior
• Participate in resource planning; both from a project management perspective and team performance management perspective

Optimize the network

• Lead worldwide projects, crafting staffing, equipment plans, schedules, and risk mitigation
• Develop a test time roadmap that delivers an efficient overall core solution in production where coverage is driven to the most appropriate socketing
• Actively drive improvement in worldwide test processes in order minimize cost and increase quality
• Influence Design and PE on DFT implementation to lower cost test

Build an elite team

• Lead hiring, training, and career development of NAND Probe, Burn, WLR, Test Learning Vehicle engineers
• Build an environment that fosters team work, innovation, and job fulfillment.
• Develop technical leadership: engineers who understand the device, testing, and testers.
• Measure and communicate team's successes and failures, and develop improvement plans.

Qualifications:

• Bachelor’s / Master's degree in Electrical Engineering, Computer Engineering, Computer Science or a related field
• At least 5 years of experience in Test Solutions Engineering
• As a leader in Test Solutions Engineering, you’ll be accountable for developing team member capabilities and skills critical to delivering a successful solution.
• Prior experience in a supervisory/leadership role is highly desired
• Developing array core test solutions requires a strong foundation of multiple disciplines; semiconductor operation, tester platform, design for test architectures, programming and statistics.
• A natural curiosity and strong problem-solving skills are essential to success in this role.
• Excellent interpersonal and communication skills
• Dedication to decision-making grounded in strong data analysis
• A strong desire to constantly learn, improve and innovate core testing principles
• Proven track record of technical development and continuous improvement
• Willingness to accommodate global meeting schedule and occasional travel

Directs and coordinates engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment and control devices. Determines conditions under which tests are to be conducted, and phases of test operations. Coordinates operational, functional and performance phases of tests. Analyzes and interprets test data. Prepares technical reports of for use by engineering personnel. Selects, develops, and evaluates personnel to ensure the efficient operation of the function.

• Execute several phases of product development including verification, emulation, and validation. Additional contribution opportunities include the development of HW/SW, test plans, and tools to enable internal and external test/reference platforms.
• Conduct verification, emulation, and validation to ensure the quality of Marvell’s automotive Ethernet switch products.
• Develop tools to improve the quality and efficiency of the solutions.
• Research to understand corresponding automotive standards and design specifications to build test cases.
• Create documents used for the test: test plans, test procedures, test methodologies, and test results.

Requirements:

• Master in Electrical Engineering, Computer Engineering and related areas.
• Solid understanding and experience with C/C+/Python programing skill.
• Knowledge of Automotive Ethernet protocols and industry standards.
• Knowledge of signal processing.
• Must be flexible, proactive, and able to work in a team.

Job Description & Requirements

The Manager will be responsible for overseeing automotive maintenance projects and supporting the Engineering and Operations Control team through innovation and data analysis. The role requires expertise in project execution, optimizing maintenance processes, and leveraging data analytics to drive operational efficiency. The Manager will also play a key role in implementing technological advancements and continuous improvement initiatives to support business objectives.

Key Responsibilities:

1. Project Management for Corporate Fleet:

• Oversee projects, from planning and execution to monitoring and closure.
• Ensure all maintenance activities align with safety standards, quality control, and regulatory compliance.
• Coordinate with cross-functional teams to ensure timely and cost-effective project delivery.
• Manage project timelines, budgets, and resources effectively.
• Track and report project progress to senior management and key stakeholders.

2. Support Engineering & Operations Control:

• Collaborate with workshop operations teams to drive improvements in fleet maintenance operations.
• Develop and implement data-driven strategies to enhance operational performance, including efficiency, productivity, and resource utilization.
• Use data analytics and KPIs to monitor and evaluate the performance of maintenance processes.
• Assist in the development of dashboards and reporting tools to provide real-time insights into maintenance performance and equipment health.

3. Innovation & Continuous Improvement:

• Identify opportunities for innovation and process improvement in automotive maintenance operations.
• Stay up-to-date with the latest trends in automotive engineering and operations control to ensure the company remains competitive.

4. Stakeholder Collaboration:

• Work closely with internal teams (Engineering, Operations, IT, etc.) and external partners (vendors, subcontractors, etc.) to ensure alignment on project goals and execution.
• Engage with senior management to align project outcomes with business strategy.
• Provide technical guidance and support to the maintenance and operations teams.

5. Resource & Team Management:

• Lead training initiatives to ensure that teams are proficient in the latest tools and technologies related to automotive maintenance.

Key Qualifications:

• Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or related field.
• Minimum of 5-7 years of experience in automotive maintenance, project management, or engineering operations control, with at least 2 years in a managerial or supervisory role.
• Proven experience managing complex automotive maintenance projects. PMP or similar certification is advantageous.
• In-depth knowledge of automotive systems, fleet maintenance, and data analytics.
• Strong analytical skills and experience with data analysis tools to optimize operations.
• Experience implementing new technologies, driving process improvements, and promoting innovation.
• Strong written and verbal communication skills, with the ability to influence stakeholders and present data-driven insights.

Competencies:

• Strong problem-solving and critical thinking skills.
• Proactive approach to identifying and implementing solutions.
• Ability to manage multiple priorities and projects simultaneously.
• Ability to work effectively in a fast-paced and dynamic environment.

Working Conditions:

• Office-based with regular visits to automotive maintenance sites and operations centers.
• Occasional travel may be required to meet with external vendors and stakeholders.

Job Descriptions

1. Transportation of workers
2. Collection / delivery of materials
3. Dispatch duties when required (collection/ delivery of cheques)
4. General ad hoc duties assigned

Job Requirements

• Candidate must possess at least Primary/Secondary School/"O" Level in any field.
• Required language(s): English, Optional: Mandarin (to handle queries and issues from Chinese speaking clients)
• At least 1 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): Minimum Class 3 Driving License
• Preferably Non-Executive specialized in Clerical/Administrative Support or equivalent.

Interested candidates, do email us your resume at our website ([email protected]).

Involvement of recruitment company is kindly declined. Thank you.

Introducing GF

GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF

Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your Job

• Maintain and support equipment readiness
• Perform preventive maintenance (PM) and troubleshooting of equipment
• Execute maintenance and tool support ensuring equipment readiness
• Troubleshoot and upgrade of equipment ensuring minimize downtime
• Analyze and monitor technical charts
• Drive equipment improvement plans and projects
• Ensure and follow good safety practices and custody of tools, equipment and other properties
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements
• Work and collaborate other projects and/or assignments as needed

Job Requirements

• Diploma in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• At least 1-2 years working experience in electrical / electronics industry
• Good understanding of Equipment and their handling
• Have an understanding of Preventive Maintenance
• Ready to Perform 12-hours rotating shift

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Job Description:

• Review and Study customer's specifications and drawings
• Set up machines and create samples
• Update sample making records
• Assist in new product development
• Create and maintain jigs and fixtures
• Assembly of wire harness and Electromechanical parts
• Any other duties assigned from time to time

Requirements:

• Good eyesight as some components are small
• Not color blindness for identify colored cable and label·
• Understand basic English to read drawing and cutting length

Job Types: Full-time, Permanent

Schedule: Monday to Friday

Location: 4 Loyang Lane, Singapore 508914

Intro to GF

GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF

Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Introduction:

We are expanding our Fab Operations and are looking for Process Engineers, in this role you will sustain and improve process / SPC to meet quality, cost, productivity requirements. Process improvement to eliminate inherent process weakness to achieve company goals.

Your Job:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance.
• Do proper annotation to maintain quality troubleshooting rate for SPC OOC.
• Understand Cp and Cpk indices.
• Monitor critical SPC charts daily.
• Perform process window study and provide improvement plan to reduce OOC and improve CPK.
• Review ESPC charts using SPACE.
• Know all the rules for ESPC.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Raise PCRB and understand the requirement for PCRB opening, follow through with qual plan, analyze data using required software and CR closure.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues.
• Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline.
• Work closely with Equipment Engineer on new equipment acceptance.

Required Qualifications:

• Degree in electrical / electronic / Mechanical / Microelectronics / Chemical process Engineering / Chemistry / Physics
• 2 years of working experience in electrical / electronics industry
• Team Player
• Good ownership and accountability
• Good verbal and written communication skills
• Flexible and able to support overtime
• Self motivated, meticulous, and discipline
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

JOB PURPOSE

The Project & Engineering Coordinator has to oversee and manage, planning and execution of assigned engineering projects and working alongside other engineers in the planning, design, development, and evaluation of projects.

JOB RESPONSIBILITIES

· Foster a safety culture in all P&E project execution and ensure 100% compliance safety requirement, including contractors and visitors.

· Assist for creating detailed project plan, timeline and schedule to ensure that all tasks are completed on time and within budget.

· Assist Project Engineer to develop new project scope of work.

· Work with compounding and Polymer plant engineers to generate new projects

· Coordinate project execution - Coordinate internal resources, 3rd party vendors/ contractors during projects installation to ensure flawless execution of the project.

· All the engineering activities to execute in compliance with company guidelines i.e. mechanical integrity, SABIC Engineering Standards & EHSS requirements.

· Create the instructions necessary for systems to function. This includes manufacturing maintenance procedures, trainings and system handover to operation.

· Quality Control - Project Coordinate ensure that all work meets the required quality standards and specifications

· Verify and audit the project quality documents with vendor to align engineering standard.

· Documentation - Maintain Engineering deliverables (drawings and documents),Producing CAD drawings according to specifications and changes.

· Reporting- Provide regular progress report to the stakeholders.

EDUCATION/EXPERIENCE REQUIREMENTS

· Minimum NITEC/ Technical certificate/ Diploma in Electrical or Mechanical Engineering or equivalent.

· Preferably with min. 3-5 years’ relevant work experience in chemical industry.

· Knowledge about project management.

· Projects planning & coordination skills.

· Good knowledge about auto CAD and practical experience using CAD software may be required.

· Good knowledge about Design and analytical skills.

· Good knowledge about pneumatic and hydraulic system.

· Good knowledge of office software.

· Strong communication and interpersonal skills.

· Ability to follow instructions and to collaborate with others.

· EHSS knowledge and understanding for Project execution.

· Knowledgeable in Maintenance Theory & Principles; Work processes - Project scheduling and execution

School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research. With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

We are hiring a Project Officer to support the research related work for engineering research project titled: Harnessing Randomness and Chaos in Complex Disordered Photonic Systems - WP3 Miniaturized disorder-scattering based spectrometer in the mid-infrared and Terahertz.

Key Responsibilities:

The Project Officer will work on engineering based research projects. The roles of this position include:

• System integration for the spectrometer and imaging systems
• Build up optical characterization setup and perform device characterization
• Perform the measurement of optoelectronic device
• Prepare research project reports.
• Prepare research materials/equipment purchase requisition.
• Collect and analyze research data.
• Other ad hoc duties pertaining to the research project.

Job Requirements:

• Bachelor degree in Electronic Science and Technology, Optical Engineering, or other related Engineering background.
• Preferred to have more than two-years of relevant research experience.
• A desire to work in a fast paced, collaborative environment.
• Self-motivated and good tasks initiative.
• Strong command of office software such as Excel, power point, word etc. and be capable to plot complicated data into graphs.
• Strong team-work spirit.
• Excellent communication and writing skills.

We regret to inform that only shortlisted candidates will be notified.

Job Description

• Carry out maintenance, repair and overhaul work on vehicles using diagnostic unit, ensuring minimum turnover time for scheduled repairs and inspections to meet workshop’s service standards and according to job order
• Ensure high standard of workmanship and avoid any come back job
• Notify Workshop Manager of unusual repair problems which will require major repair and replacement parts for recommendation
• Opportunity to work on various luxury brands and sport cars
• Adhere to defined guidelines in regards to safety, orderliness and tidiness in the workshop, including proper handling of tool and equipment
• Ensure proper handling of customer vehicle and good housekeeping of work area
• Practice safe and proper engineering practices in accordance with manufacturer or workshop instructions and procedures
• Cooperate with Workshop Manager or any other supervisor to ensure customer requirements are met
• Perform any other ad hoc duties as assigned

Requirements

• NTC 2 or NITEC 2 in Automotive Technology/Electrical & Electronic Engineering
• Able to communicate in English
• 2-3 years experience in automotive electrical repair
• Applicants who possess relevant experience for the above responsibilities are most welcome to apply.
• Class 3 Driving License advantageous

Job Descriptions

• Preparation of Tender submission & project budgets
• Monitoring of procurement process
• Preparation of cash flow forecast Valuing completed works, filing of progress claims and all other necessary contract documents administration works
• Prepare interim valuation and certificate of sub-contractors claims according to work completed and evaluate variation claims
• Monitoring of procurement process
• Attendance of site/technical meetings
• Evaluation of price comparison summary
• Any other ad-hoc duties as assigned

Requirements

• Degree in Construction, Quantity Surveying or equivalent
• Strong technical background with sound knowledge of pre and post-contract duties
• Proficient in MS Office especially in Excel & Power Point
• Possess good writing, communication and interpersonal skills
• Drafting knowledge using AutoCAD is an added advantage
• Fresh Graduates are welcome to apply

We are looking for an Electrical Engineer with 2-5 years working experience who would have the following experience / knowledge/ qualities :-

• Basic Electrical Building Services Design knowledge
• Familiar with local codes and standards (e.g SS 568, 560 etc)
• Able to perform cable size and voltage drop calculation conforming to local codes and standards. Familiar with earthing and lighting protection works.
• Familiar with CAD software and able to make minor modification independently.
• Self-motivated individual able to lead a team of supervisors and electricians independently.
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Coordinate and support Project LEW for Power Turn ON, Testing and Commissioning.
• Project progress monitoring & updating to Project Manager
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g. cable containment routing drawings, small power and lighting layout etc)

Requirements

• Min Diploma in Electrical Engineering or equivalent
• Strong technical background with sound knowledge of electrical construction works
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Possess good writing, communication and interpersonal skills
• Drafting knowledge using AutoCAD is an added advantage
• Working in a “Live” process plant is an added advantage.
• Fresh Graduates are welcome to apply

• To ensure worforce compliance with WSH regulation, Compancy/Client procedures at site
• Conduct daily tool box meeting, safety checks and review Job hazard analysis
• Safety observation reports
• Fatigue Management
• Participate in company internal safety audits
• Responsible for upkeep of documentation on project matters
• Minimum 2 years working experience in Process/Construction Sector
• Advace Certificate in Workplace Safety and Health
• Working at Height Supervisor certificate
• Certified First Aider
• Managing Working at Height certificate will be advantage
• Lifting Supervisor certificate will be an advantages
• Possess minimum class 3 license will be an advantage

Tecson Engineering has been serving Singapore's rail and marine sector as a sub contractor with humility since 1986. Specialising in Rail Engineering, Maintenance, and Repair works, our dedication to excellence is unwavering. With a focus on collaboration and integrity, we tailor our solutions to meet your specific needs. Our experienced team is committed to delivering high-quality service that exceeds expectations.

Postion : Testing and Comissioning Engineer

Duration: Min. 1 year (with possible extension)

Venue: Multiple Locations within Singapore (Depots, Site office, Main Office) - Depending on projects.

Job Description

Detailed Main Tasks & Responsibilities:

• Support software verification and validation processes.
• Participate in onsite activities including system installation, system configuration, and pre-on-site test activities.
• Lead assigned dedicated work scope of Test and Commissioning (T&C).
• Participate and coordinate on-site test and commissioning activities with customers as witnesses.
• Conduct all required test procedures, methodologies, and equipment testing activities related to the project to obtain sign-off from the customer.
• Prepare technical proposals (testing and commissioning) for submission to regulatory authorities.
• Arrange all test equipment required for testing in coordination with the site manager and team leader.
• Mobilize required test equipment and ensure readiness for testing.
• Coordinate and liaise with customers on the application of Permit-To-Work for testing activities.
• Document and communicate procedures, configurations, and standards effectively.
• Prepare and compile test reports for submission to customers.
• Prepare and draft Method Statement Risk Assessment.
• Supervise and monitor site test activities for each specific T&C work.
• Provide support to team leaders and site engineers for all safety-related requirements.
• Develop test plans and test procedures for Site Acceptance Tests (SAT), Interface Tests (IFT), and System Integration Tests (SIT).
• Plan scheduling and job allocation for activities in coordination with the planner.
• Participate in technical discussions and report preparation.
• Organize training programs.
• Maintain and ensure the site is clear and tidy after each deployment.
• Troubleshoot and create tools to resolve incidents.
• Strive to improve the stability, security, efficiency, and availability of systems by applying software engineering practices and implementing application monitors and alerts.
• Be proactive in helping the team in any other areas within the scope of the software development life cycle.
• Handle ad hoc work, including administrative support, special projects, and on-site assistance, requiring flexibility and quick task adaptation.

Requirements:

• Minimum Diploma or Degree in Electrical Engineering, Electronics Engineering, or Mechanical Engineering.
• At least 2 years of relevant working experience in a railway environment.
• Proficiency in Linux operating system internals and network concepts.
• Experience developing tools using scripting languages such as Python.
• Ability to learn new technologies in complex operational control systems.
• Systematic problem-solving approach, coupled with effective communication skills and a sense of drive.
• Able to understand the regulation and requirements of local electrical practices and regulatory requirements.
• Computer literacy.
• Ability to prepare test procedures and relevant technical documents.
• Ability to learn and perform cut-in/cut-out of circuits for new systems or reroute cables/systems requiring T&C.
• Willingness to work night shifts, weekends, and on-call duty.
• Positive work attitude with initiative.
• Team player.

Interested Applicants, please email your resume to us at [email protected].

We are looking for an Instrumentation Engineer with minimum 5 years experience who would have the following experience/knowledge/qualities:-

• Familiar with local and international instrument and panel installation standards
• Hands on experience in calibration of instruments
• Able to Perform Loop checks
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Self-motivated individual able to lead a team of supervisors and Technicians independently.
• Project progress monitoring & updating to Project Manager.
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g Hook up drawings, P&ID, Instrument index, I/O list etc)
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Working experience in “Live” Process plants is an added advantage

RESPONSIBILITIES & DUTIES:

• To ensure an efficient Civil & Structural and Geotechnical & Tunnel design is achieved in accordance with Design Criteria and relevant standards;

• To ensure an efficient Civil & Structural and Geotechnical & Viaduct design is achieved in accordance with Design Criteria and relevant standards;

• To liaise with internal and external parties on all Civil & Structural and Geotechnical & Tunnel design matters and advises the NSC’s PRPM/SPM/PM regularly

• To liaise with internal and external parties on all Civil & Structural and Geotechnical & Viaduct design matters and advises the NSC’s PRPM/SPM/PM regularly;

• To co-ordinate the review of Contractor’s Civil & Structural and Geotechnical & Tunnel submissions and assists the NSC’s SPM/PM in conveying a timely response to the Contractor; To co-ordinate the review of Contractor’s Civil & Structural and Geotechnical & Viaduct submissions and assists the NSC’s SPM/PM in conveying a timely response to the Contractor;

• To identify and resolve potential design related issues during construction phase;

• To carry out any other duties as required by the Authority’s Project Management Team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical support as required in the evaluations of Contractor’s claims etc.; and

• To ensure that the design intent is translated to construction on site by means of correct drawings and specifications.

QUALIFICATIONS & REQUIREMENTS:

• Minimum Degree in Civil / Structural Engineering or equivalent

• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works for tunnel and/or viaduct/flyover project

• Team player with good interpersonal and communication skills

• Candidates with strong relevant years of experience will be considered for senior roles

Interested candidates please forward your resume to [email protected]

We are an Electrical & Instrumentation Contractor specialising in installation works in Oil & Gas Plants, Pharmaceutical Plants, Wafer Fab, Commercial and Industrial Projects.

We being a SME company, you shall have good development Opportunities and chance for Outstanding career growth.

Job Description

• Must be a passionate and Energetic leader who is able to guide and manage the People
• Good understanding on Cost Control, Variations and Change Control
• Able to monitor and control procurement of materials in an orderly manner
• Able to Handle own and sub contractors people on site and timely control on handling complaints, settle disputes and grievances of personnel.
• Handle Clients for Business, Safety , Cost and Timely construction activities
• Has to Identify potential issues and resolve it before it becomes an issue

Requirements

• You must be well versed technically and practically with the Electrical installations and basic design as per Singapore Standards.
• You should adapt with RNC’s ISO systems (Quality and Safety) and be innovative to suggest improvisation in the system.
• Knowledgeable in Lighting, Small power, Earthing, Lightning Protection and ELV systems.
• Good Organisation skills, planning and Prioritizing works.
• Go-Getter mindset and good in communication.
• Responsible for actions of the Team on site.
• Minimum 3 year experience as a project manager.
• Proficient in MS Office (e.g Excel & Power Point).
• Possess good writing, communication and interpersonal skills.
• Working in a “Live” process plant is an added advantage.
• Knowledge on Instrumentation works shall be an added advantage.
• Class 3 Licence is an added advantage.

Roles and Responsibilities

• Facilitates HSE risk assessment conducted by the line management and ensures all necessary preventive measures against the identified hazards are implemented.
• Reports HSE incidents to the management and relevant stakeholders and takes appropriate actions.
• Facilitates, assists, and provides guidance on incident investigations to learn better ways for mitigating risks.
• Provides feedback to the management and employees on lessons learned and best practices from within their own unit and across project management.
• Supports the Site/HSE Manager in reporting progress with respect to the implementation of the project-level HSE objectives and Key Performance Indicators (KPIs), as required.
• Assists the line managers and supervisors in understanding their obligations, liabilities, and requirements for role fulfillment, as per local HSE laws and project-specific requirements.
• Supports and drives behavioral change through the local implementation of project specific performance improvement programs and practices.
• Supports and embeds an exemplary health and safety culture with a strong focus on the environment across their respective organization.
• Ensures that the appropriate HSE-related equipment and tools are available and used effectively.
• Contributes to and/or plans and executes HSE-related projects.
• Develops project objectives and reports the progress to management.

Qualification Requirements

• Registered as a Workplace Safety and Health Officer (WSHO) with the Ministry of Manpower (MOM).
• Project Workplace Safety and Health Officers (WSHO) with at least eight (8) years’ experience in industrial buildings and process plant construction projects.

Job Description

• To fetch and send workers
• Deliver part/material to site
• Assist in loading and unloading of goods
• Other ad hoc duties assigned

Requirements

• Preferably Class 3 & 4 License
• Have atleast 5 years driving expecience
• Able to work night shift

Interested candidates please send your resume to [email protected] . Only short listed will be interviewed.