Job Summary:

Responsible in providing general direction towards a successful completion of a project, ensuring the disciplines follow the quality standard set forth by the company. The job entails but not limited to identification of critical aspects of project execution and addresses them before they manifest as problems; verification and management of manhour consumption of different disciplines during the project execution.

Responsibilities and Duties:

• Knowledge in designing of air-Conditioning & mechanical ventilation system, refrigeration system & coldroom system.
• Perform overall quality control of the work (budget, schedule, plans, personnel’s performance, monitor and coordinate the assigned engineering projects) and report regularly on project status.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Assign responsibilities and mentor project team.
• Review engineering deliverables and initiate appropriate corrective actions.
• Perform risk management to minimize project risks.
• Preparation of shop-drawings submission, OMM & T&C report for client.
• Assist in on tendering BQ & quotations for projects.
• Interact with clients on a daily basis.

Qualification:

• Minimum Diploma in engineering.
• Work experience within construction industry or similar relevant field.
• Ability in handle multiple projects simultaneously.
• Knowledge of codes, standards and procedures.
• Proficient in AutoCAD, BIM, microsoft office , etc.
• Proactive problem solver, Outstanding communication, Time management, Interpersonal, Leadership skills, Attention to details.
• SG Class 3 Driving License.
• Language: English, Mandarin.

Company Profile

Airnovation Engineering Pte Ltd is a company dealing with coldstores as well as airconditioning & mechanical ventilation works. We design & build for logistics players. The innovative development of industrial and commercial cold storage is our main growth driver. I.e to say we are doing installation works for big warehouses etc.

Responsibilities:

• Responsible for pre and post contract QS services;
• Handles interim and final payment claims and feedback comment to payment response to Management
• Job site visiting and monitor site progress
• Responsible for quantities taking-offs, work out variations claim, verify measurements with the client
• Handles contract administration and settlement of final accounts with clients & subcontractors;
• Monitors project phasing & payments;
• Preparation & Revision of Construction Programmes & follow-up delay claims

Requirements:

• Degree in Applied Science in Construction Management or Diploma in Building Services / Mechanical / Electrical engineering
• Able to meet challenging work demands and tight schedules
• Good interpersonal and communication skill
• Good command of spoken and written English
• Independent and resourceful

Responsibilities:

• Able to adapt to the various functions within the HR department
• Updating of staff information in the database and Personnel File Maintenance and ensuring confidentiality at all times
• Conduct newcomer’s orientation process and briefing of employment for contract terms and conditions
• Assist in all Recruitment Acctivities & Work Pass Applications such as Work Permit/SPass/EPass application and pass renewal
• Maintain employees’ leave record and medical claims
• Maintain, upkeep company & departmental documentation of operational policy, rules and regulation
• Maintain, upkeep and participate in ISO, BizSafe and other required certifications in Construction Sector
• Communicate with the accommodation for foreign employees
• Assist in administration duties when required and other ad hoc duties as assigned

Requirements:

• Diploma in HRM or its equivalent education certificate
• At least 1 year of relevant working experience in the related field
• Good understanding of human resources functions
• Able to exercise mature discretion on confidential issues
• Possess excellent Verbal and Communication Skills with good interpersonal skills
• Computer literate with strong proficiency in Microsoft Office applications
• Good knowledge of Employment Act, MOM regulations and practices
• Positive attitude, fast and independent with strong organizational skills
• Self-motivated and able to work under pressure
• Ability to multi-task and work independently in a fast-paced environment

Job description

· Prepare tender and contract documents, including bills of quantities material quantity and take off.

· Assist in establishing a client's requirements and coordinate quality controls to ensure deliverables meet requirements.

· Advise on a procurement strategy.

· Prepare, analyse and track expenses and costing for tenders and projects.

· Allocate work to subcontractors, suppliers, and ensure prompt and quality delivery through contractual obligations.

· Prepare and guide the project administrators to prepare monthly progress claims/value subcontracts payment claims / provide advice on contractual claims.

· Analyse outcomes and write detailed progress reports with the project team.

· To coordinate and liaise with consultants, clients, sub-contractors, and other parties involved for project specifications & other technical issues.

· Reviewing and verifying all architecture, civil & structural work, and ensure compliance with local construction regulations.

· Guide and instruct the project administrators to prepare method statements and presentations.

· Schedule regular meetings and record decisions (e.g. assigned tasks and next steps).

· Break projects into doable tasks and set timeframes and goals.

· Monitor project progress and address potential issues.

· Act as the point of contact for all participants.

· Identify potential projects set targets, and work with the commercial department to clinch project.

· Be involved in the process of work head applications.

· Other ad-hoc duties as assigned.

Requirements:

· Candidate must possess at least a degree in Quantity Surveying.

· 2 years or more of experience in Quantity Surveyor

· Prepare tender and contract documents, including bills of quantities of material quantity and take off.

· Good in analytical, communication, organizational and interpersonal skills

Creating and managing team schedules. In some cases, organizations have set hours for their entire workforce

Reporting to HR and senior management. Manager serve as a bridge between upper management and other employees

Bridge as an intermediate between client and company top management, and explain client needs to employee

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

• Take off quantity during tendering process
• Source for subcontractors and suppliers and evaluate quotations
• Support and prepare tender submission
• Pre-contracts, In-contracts & Post-contracts administrations
• Prepare periodic progress & variations claims
• Evaluate subcontractors claims
• Resolution of any contractual issues arising from the projects
• Recognized Diploma in Quantity Surveying or equivalent
• Possess good analytical and communication skills
• 5-day work week

Responsibilities:

• Oversee all project activities, including cost management, project schedule, staff development, site safety (together with safety manager) and security.
• Liaise with clients, consultants, sub-contractors, suppliers etc
• Plan, schedule, monitor, and update the project to meet targets.
• Resolve design-related issues during construction.
• Responsible for all construction site matters including safety and other compliance matters
• Ensure the smooth completion of the project

Requirements:

• Minimum 5-10 years of relevant experience in the construction (preferably gas piping) industry
• M & E Experience
• Independent, strong analytical and possess good interpersonal skills

Key Responsibilities:

· Sourcing suppliers, and comparing price and quality to ensure the best deal.

· Purchase goods, materials, components or services

· Support the purchasing function and other relevant departments and communicate any supply problems which may impact on business operations.

· Act as an interface between suppliers and other relevant departments on purchasing processes and new projects and activities.

· Monitor and advise on any issues which present risk or opportunity to the organisation.

· Liaising with suppliers on the delivery and warehouse teams to ensure goods are received on time.

· Monitor market trends, provide analysis on costs.

· Prepare reports and updates as and when required.

· Work closely with others in the procurement function.

· Negotiate contracts, improve prices and terms of business with suppliers and review opportunities to make business savings utilising negotiation and procurement best practice tools and methods.

· Prepare and raise purchase orders and blanket order.

· Build, maintain and manage supplier relationships and keep up good communications.

· Ensure that a professional and consistent approach is taken in relation to all supplier relationships.

· Ensure compliance to company guidelines, purchasing policies and procedures during supplier negotiations and contracts award process.

· Conduct research for new components and suppliers.

· Compile data relating to supplier performance to enable evaluation.

· Assess and evaluate suppliers and contribute to performance reviews to ensure contract compliance.

· Contact suppliers to resolve price, quality, delivery or invoice issues.

· Other task assigned by Procurement Manager/General Manager.

Purchaser Requirements

• O Level, diploma in business, logistics, or a related field may be required.
• Previous experience in a similar position.
• Superb written and verbal communication and negotiation skills.
• Great organizational and planning skills.
• The ability to identify market trends and make decisions in a high-stress environment.
• Negotiation skills, Analytical skills, Interpersonal skills

• Answering customer questions, providing information, taking and processing orders and addressing complaints.
• Co-ordinating with project sites and office support activities.
• Assist with filing, scanning and photocopying of documents
• Compiling and maintaining records of business transactions.
• Any other ad-hoc duties as required.
• Positive attitude, pro-active in working, able to work independently.

Key Responsibilities and Requirements:

• At least 1 year of Sales experience within the interior construction sector.
• With presentations and time management skills.
• Diploma / certification in any of the following: Architecture, Interior Design, Project/construction management, Marketing Management or related building construction/ M&E studies, Marketing Management.
• Familiar with, electrical, Celling partition work, carpentry, Tilling work, Awning work, renovation works and fit-out works.
• Experience in managing multiple projects.
• Positive, commitment and “can-do” attitude.
• High integrity, good team player, keen desire to learn, contribute, advance and progress with the company.
• Delivering business/Market share in collaboration with Zonal Sales teams for the year/quarter/month
• Salary+Sales Commission+Yearly Bonus
• Responsible to lead development and implementation of key strategic marketing initiatives for Singapore comprising of PQ, CPC, PDA and Bussmann in order to achieve the Sales Revenue growth in Singapore year on year
• Coordinating market analyses with sales team members and defining appropriate forecasts and plans
• Driving sales efficiency by delivering appropriate product knowledge information and training for each salesperson
• All works Monitoring with subcontractor and handover to clients.
• Monitoring Payment

Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

Role and Responsibilities

• To co-ordinate with the clients, subcontractors, and consultants on project matters
• Management, supervision and coordination of construction activities.
• Supervise team members, subcontractors and daily work activities on one or more project site(s) allocated.
• To ensure supervisors and workers meets client & regulatory requirements, environmental, safety and health requirements
• Monitor progress at site and put up progress claim.
• Coordinate and assist QS and Project Manager on project progress and claims.
• Other adhoc duties by management assigned from time to time.
• Participate in project design meetings and propose improvements.
• Evaluate potential problems and technical hitches and develop solutions.
• Plan and manage team goals, project schedules and new information.
• Manage project-related paperwork.
• Direct project correspondences by preparing and reviewing project proposals, memos, meeting minutes and emails.
• Communicate with clients to identify and define project requirements, scope and objectives.

Requirements

• Minimum Diploma Holder/ ANY
• Minimum 5 years' experience in site coordination.
• Excellent project management skills
• Team leadership
• Working knowledge of various computer software programs (MS Office, POS)

Roles & Responsibilities

Descriptions

· Pick up and drop off passengers at designated locations

· Follow a planned route according to a time schedule

· Ensure that the trips stay on schedule

· Ensure the safety of passengers both onboard the bus and when alighting

· Obey traffic laws

· Follow procedures to ensure passenger safety

· Keep passengers and other road users safe

· Crowd management skills

· Perform basic maintenance (check the bus tires, lights, and oil)

· Keep the bus clean and presentable to the public

· Report all incidences and traffic disruptions to HQ

· Will be required to work on Sat/Sun/PH

Job Requirements

• Candidate must possess Degree.
• Able to perform shift work.
• Able to start work immediately or within short notice period would be advantageous.
• Good navigation skills and knowledge of local routes are essential and will be an advantage.

Responsibilities:

• Managing a team of technical supervisors on site to ensure all works comply fully with regulatory and client’s requirement.
• Work closely with our project Management Team, Professional Engineers, Client, Contractors and local regulatory authorities to provide planning, design and supervision leadership including solving site problem.
• Responsible for monitoring all geotechnical and instrumentation works on site to ensure compliance with design criteria and permissible tolerance of instrumentation movements as specified by the Qualified Person(Design)

Requirements:

• Degree in civil Engineering recognized by BCA/IES.ACES with minimum 5 years of relevant experience as a resident Engineer
• Accredited with IES/ACES with a valid Resident Engineer for the past five years
• Relevant experience in supervising substructure construction, bore piling works, structural steel works.
• Candidate must have a strong ability to interpret the drawing and contract documents on works to carried out.
• A good team player and experience in leading a team of Resident Technical Officers
• Candidate must have at least 1 year experience on LTA project

Interested candidates please forward your resume to [email protected].

Job Description

• To fetch and send workers
• Deliver part/material to site
• Assist in loading and unloading of goods
• Other ad hoc duties assigned

Requirements

• Preferably Class 3 & 4 License
• Have atleast 5 years driving expecience
• Able to work night shift

Interested candidates please send your resume to [email protected] . Only short listed will be interviewed.

Job Description

• Create instructions for machinists
• Make calculations for programming
• Translate instructions into CAD programs
• Check completed programs by running simulations or tests
• Prepare geometric layout of designs using software
• Choosing of cutting tools needed for machining
• Analyze job order and perform calculations
• Writing of new programs and modify existing program to increase productivity and efficiency
• Improve setup time

Requirements

• Diploma / Degree in Manufacturing or Mechanical Engineering or related fields
• Min 2 years of related working experence in mechanical jigs & fixture design for semiconductor
• Strong fundamentals in mechanical concepts
• Proficient in CAD software like Solidworks, AutoCAD, MasterCAM & etc
• Knowledge of MS Office applications (eg. Words, Excel)
• Good interpersonal and communication skills
• Able to work independently and multi-task w
• Strong sense of responsibility

Job Descriptions

• Manage receiving, store and shipping functions
• Ensure timely delivery of goods to customers
• Keep inventory control on all items
• Maintain accurate transactions in WMS
• Maintain 100% inventory accuracy
• Generate related inventory reports
• Lead a team of warehouse staff

Requirements

• Diploma in related field
• 2-3 years logistics experience
• Able to drive forklift
• Able to work with all departments
• Engineering drawings knowledge an advantage

Job Description

• Generate initial Bill of Materials
• Co-ordinate and issue official drawing/data to vendors for making of First article and samples for approval
• Disseminate engineering data and/or any changes to respective key personnel
• Continued process improvement to reduce cost, improve sustainability and develop best practices

Requirements

• Diploma in Engineering
• Min 2 to 3 years related experience
• Knowledge in Solidwork or equivalent
• Posses good communication skills

Position Title – Assistant Project Engineer

• Working Days: 6 Days
• Working Hours: 8am – 6pm
• Location: Singapore (Depends Project Location)
• Salary range: $5000 - $6000

Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Organize labor, equipment and material for day to day site activities
• Carry out material receiving inspection and maintaining material record. All delivery order are to be return to office for record
• Prepare daily and monthly progress report, perform and maintain inspection record.
• Understand the Electronics and Electrical design and installations
• Any other duties assigned

Requirement:

• Degree in Electronics and Communicaiton /Civil Engineering or its equivalent
• Good technical competency.
• Good Communication skills; both verbal and writing in English.
• Knowledge and application of planning tools such as MS office (word, excel,powerpoint, project) is an advantage.
• Singapore Driving Liecense class 4/3

As the General Manager for Business Development, you will be responsible for developing and implementing strategies to expand our market presence, enhance customer relationships, and drive revenue growth. You will lead a team of professionals and work closely with senior management to achieve business objectives.

Key Responsibilities:

• Strategic Planning: Develop and execute business development strategies to achieve company goals and objectives.
• Market Analysis: Conduct market research and analysis to identify new business opportunities, emerging trends, and competitive landscape.
• Customer Relationship Management: Build and maintain strong relationships with key clients, stakeholders, and industry partners.
• Sales Leadership: Lead and manage the business development team, providing guidance, training, and support to achieve sales targets.
• Partnership Development: Identify and establish strategic partnerships and alliances to enhance business growth.
• Proposal Development: Oversee the preparation and submission of proposals, bids, and contracts to potential clients.
• Financial Management: Monitor and manage budgets, forecasts, and financial performance related to business development activities.
• Reporting: Provide regular reports on business development activities, progress, and performance to senior management.
• Innovation: Promote a culture of innovation and continuous improvement within the business development team.

Qualifications:

• Education: MBA from a recognized university.
• Experience: At least 5 years of experience in business development, sales, or a related field, with a minimum of 3 years in a leadership role.
• Industry Knowledge: In-depth understanding of the Construction market in Singapore.
• Skills:Strong strategic thinking and planning abilities.
  Excellent leadership and team management skills.
  Proven track record of achieving sales targets and business growth.
  Exceptional communication and interpersonal skills.
  Ability to build and maintain strong relationships with clients and partners.
  Strong financial acumen and budget management skills.
  Proficiency in using business development and CRM software.
  

Additional Requirements:

• Technical Skills: Advanced knowledge of computer applications and software relevant to business development.
• Driving License: A valid driving license is preferred.
• Languages: Proficiency in English is required; knowledge of additional languages is an advantage.

· Please include your current and expected Salary in your resume

· Identify & develop new business opportunities

· Establish new accounts as well as maintaining with existing customers

· Meeting Company objectives and expectations

· Marketing function for new products

· Corresponding with customers on quotations and purchase order related issues

· After Sales service calls

· Diploma in Mechanical or other disciplines with or without experience.

· Dynamic, outgoing personality and self-motivated.

· Able to work independently as well as a team player in a fast paced and pressurized environment.

· Class 3 Driving License and possess own vehicle will be an advantage.

Job Description
As a BIM Engineer, you will report to the Senior Design Engineer and be responsible for the successful implementation and management of BIM processes in the construction field, specifically focusing on Building Services, Airconditioning, and Mechanical (M&E, ACMV) works. You will collaborate closely with the design department to ensure compliance with engineering and safety requirements and coordinate with stakeholders to maintain the integrity and accuracy of the BIM model throughout the project lifecycle.

Key Responsibilities

1. Construct and manage Building Information Models (BIM) with precision, ensuring the integrity and accuracy of all models. Ensure timely coordination and completion of tasks as assigned by the immediate superior.
2. Ensure all BIM models comply with project specifications and requirements.
3. Maintain and update the model library for all ongoing projects, ensuring that all data remains secure and is treated as company property.
4. Collaborate with project teams to collect site information for updating project BIM models.
5. Work closely with the Quantity Surveying department to provide drawings and information required for tendering, cost estimation, monitoring, and scheduling.
6. Coordinate with the BIM department to validate and confirm the accuracy of BIM designs.
7. Maintain, update, and manage hardware and software essential for the operation of BIM.
8. Assist in the creation of 2D AutoCAD drawings and ensure seamless integration between 2D and BIM models, bridging the gap between office and site operations.
9. Ensure all work conforms to the company’s ISO standards.
10. Support the submission of Operation, Maintenance, and Monitoring (OMM) manuals and media presentations using BIM models.
11. Follow the company's responsibility and authority matrix in the execution of duties.
12. Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes and standards, such as Singapore Code of Practice (CP13), SS553, and the Fire Code.
13. Utilize design software to perform thermal load calculations, energy modelling, and system sizing.
14. Prepare design documents including system layouts, schematics, and specifications.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Requirements

1) To Work as lead Engineer for Oil & Gas Project

2) Leading a Team of Electrical Engineers in Preparation & Review of Load lists, Single Line diagram of PCC, PMCC, MCC, DB's, Equipment Sizing Calculation, System Study through ETAP (Version 19.1) and Preparation & Review of Layouts like Hazardous Area classification, Lighting Layout, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.

3) Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies

4) Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/ approvals/resolution of open issues

5) Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team

6) Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.

7) Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works.

8) Preparation and Compliance for Engineering Audit Requirements.

9) Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.

10) Technical assistance to construction activities and attending to Site Queries.

11)Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.

12) FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

13) Coordination with PMC / QP and Construction Coordination.

14) Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works

15) Inspecting various equipment like LV & MV Bus duct, LV & MV Switchgear, Cables, Transformer, AC / DC UPS

16) Field Engineering Support Activities to complete the task in accordance with the project schedule.

17) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

18) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelors’ Degree in Electrical Engineering

Experience

Preferably Minimum 15 years of experience

Software Requirements

ETAP, DIALUX, Auto cad, MS Excel, MS Word

Join Our Growing Team!

The SKYLINK Group is a premier all-in-one mobility solution provider for retail sales of passenger cars and commercial vehicles, all vehicle leasing, Motor insurance, credit Hire Purchase financing, Motor workshop with full capacity of MRO (Maintenance, Repair and Overhaul) services, and vehicle body engineering works for all commercial and passenger vehicles.

Since 2017, SKYLINK Group has been rapidly expanding its offerings and fleet. We have served over 5,000 corporate customers including major industry leaders in logistics, distribution, F&B, marine, construction, sanitation, and government services.

With a commitment to fleet modernization, we have expanded our offerings to EV and Hybrid vehicles, and continuously aspire to provide greater value to our customers.

Be a part of the SKYLINK family and kick-start your career growth and progression in the mobility space today.

Responsibilities:

• Supervise and assign job to a team of workshop mechanics
• Co-ordinate between workshop and customer, updating of job status
• Prepare job card/orders for customers' requirement
• Perform vehicle controlling in the workshop, check in and out of vehicles
• Perform hands-on trouble shooting on vehicle, ordering of spare parts
• Perform quality control check on vehicles
• Prepare quotation and proforma invoices when necessary
• Job progress follow-up and recommendation of any additional jobs required when necessary
• Oversee workshop housekeeping and workplace safety
• To provide initiative to ensure smooth and efficient operation
• Any ad-hoc duties as assign by superior

Requirements:

• Minimum NTC/Nitec in Automotive Technology or at least 2 years in automotive after sales car & commercial vehicle (workshop)
• Good communication skills and a team player
• Class 3 & 4 driving license with a minimum 2 years’ experience
• Hard working, highly responsible and take ownership in the job
• Computer literate