NACT Engineering provides drones accessories for all sizes and use-cases. Our intimate knowledge of robotics systems places us at the forefront of a burgeoning mechanical revolution. As a company at the cutting edge of engineering and robotics, we are looking for a suitable candidate that will push NACT forward as a bespoke drone solutions provider for our clients in the APAC region.

Highlights of working at NACT

• Close proximity to many amenties along alexander road
• Competitive compensation package remunerated based on skill and experience.
• High level of autonomy on the job with training opportunities provided for upskilling and learning
• Open culture and collaborative environment
• High growth industry

Job description

• Work with electronics and robotics engineer to create web based GUI to display robot product status
• Continuously update the web based GUI, and write manual documentation for a team to adopt.
• Conduct troubleshooting of web based GUI for robotics system to verify the cause of failures, and assist in arriving at the corresponding solution.
• Ensure compliance with company programs procedures and applicable quality system regulations and standards.

Position Responsibilities

• Conduct tests on different web domains and bandwidth to test out key functionalities.
• Independently perform some level of failure analysis.
• Supports equipment development efforts for new products, and process improvements. These efforts may be the internal development of process equipment or coordination with an external equipment integration company.
• Supports processes. This support might include daily support of production operations as well as leading reliability and yield improvement activities for products in the web domain.
• May be expected to work on complex problems where analysis of situations or data requires an evaluation of many tangible and intangible factors. Individual will be required at times to make complex technical recommendations on design quality and reliability.
• Writes Process Specifications and Manuals when applicable.
• Supports Return Merchandise Authorization process by providing root cause analysis report.
• Collaborates with Technical Experts from other software/hardware partners to implement new Product/ Process activities across the facilities following Technology Roadmaps and Design Engineering activities.
• Performs other position related duties as assigned.

Quality Responsibilities

• Reports any observed or informed process and/or product non-conformities.
• Finds resolution of Quality Situations at the area of responsibility.
• Complies with all the requirements in the operational procedures at the area of responsibility in order to meet the requirements of all applicable Quality System regulations.

Qualifications

Bachelor Degree in Science, Engineering or field related to previously mentioned background.

Experience:

• Fresh graduates
• Or: 1+ Years with Bachelors
• Competitive compensation package remunerated based on skill and experience.

Job Overview:

The Assistant Project Engineer will report directly to the Project Manager and manage ACMV (Air-Conditioning and Mechanical Ventilation) works within the built environment. The role involves ensuring that all project activities comply with engineering and contractual requirements. This position requires collaboration with the design department to meet engineering and safety standards, while overseeing contracts, costs, schedules, and overall project completion.

Key Responsibilities:

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Support the development and maintenance of the BIM model, ensuring it is accurate and up-to-date.
• Assist in the preparation and management of project documentation, including drawings, specifications, and reports.
• Collaborate with the client to help meet their requirements under the guidance of the Project Engineer
• Assist in verifying changes to project scope, schedule, or budget, ensuring compliance.
• Help in resolving technical or contractual issues that arise during the project, with the support of the senior team.
• Provide assistance in managing the construction process to ensure it progresses on time, within budget, and meets quality standards.
• Support monitoring the performance of contractors, ensuring they meet their obligations.
• Coordinate with various consultants and contractors, under the guidance of the Project Engineer.
• Assist in the handover process of the project to the client.
• Comply with all relevant Singapore regulations and standards under the supervision of senior project staff.
• Promote safety management activities and assist in compliance inspections.
• Assist in obtaining necessary permits and approvals.
• Support sustainability efforts and ensure the project adheres to environmental standards.
• Help minimize disruption to the public during construction by coordinating with authorities.

Requirements:

• Diploma or Degree in Mechanical Engineering, Building Services, Project Management, or a related field. ACMV project experience is preferred.
• Bizsafe Level 2 safety certification or higher preferred.
• A minimum of 1 year of experience in a related field is preferred, though fresh graduates are welcome to apply.
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Career development focused on progression and growth.
• AWS included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.

Job Overview:

• Report directly to the Project Manager, managing ACMV works within the built environment.
• Ensure project management aligns with engineering and contractual requirements.
• Collaborate with the design department to ensure compliance with engineering and safety standards.
• Oversee contracts, costs, schedules, coordination, and overall project completion.

Key Responsibilities:

1. Manage projects from concept to completion, including planning, scheduling, budgeting, and stakeholder coordination.
2. Implement and oversee Project Quality Plan, Safety Management Plan, and Building Execution Plan.
3. Develop, maintain, and manage the BIM model and project documentation (drawings, specifications, reports).
4. Liaise with clients to meet their requirements and ensure project scope, schedule, and budget compliance.
5. Address and resolve technical or contractual issues during the project lifecycle.
6. Oversee the construction process to ensure timely, budget-compliant, and high-quality completion.
7. Coordinate with consultants, contractors, and ensure contractor performance.
8. Manage project handover to the client, ensuring compliance with all relevant Singapore regulations and standards.
9. Promote and manage safety activities and compliance inspections.
10. Obtain necessary permits and approvals and work with authorities to minimize public disruption during construction.
11. Ensure sustainability and environmental friendliness of the project.

Preferred Experience:

• Experience in healthcare facilities (hospitals, labs, operating theatres).
• Experience in commercial or industrial buildings (warehouses, factories).
• Experience with government projects and data centers.

Requirements:

• Degree in Mechanical Engineering, Building Services, Project Management, or a related field, with ACMV project experience preferred.
• Graduates with a degree in Sustainable Infrastructure are encouraged to apply.
• Bizsafe Level 2 safety certification or higher preferred.
• Minimum 3 years of experience in related fields preferred, though fresh graduates are welcome to apply.
• Proficiency in English (written and spoken).
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM and a valid driver's license are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Description:

• Act as the main point of contact between the company and the main contractor for all steel-related drawings.
• Participate in the design process, coordinate technical aspects, and prepare specifications and plans, working closely with Project Managers, QS and Engineers to ensure the timely submission and approval of technical drawings.
• Review and verify drawings to ensure they meet all design specifications, standards, and project guidelines.
• Create shop drawings, as-built drawings and cutting list, ensuring accuracy and compliance.
• Maintain organized document control systems and filing procedures.
• Take on additional duties as required to support the project's needs.

Job Requirements:

• Proven experience in preparing shop drawings, with strong proficiency in Tekla Structures, Autodesk Advance Steel, AutoCAD, and SketchUp software.
• Minimum of 4 to 6 years of relevant experience (experience in structural steel detailing is a plus).
• Ability to work independently as well as collaboratively with project teams and colleagues.
• Strong analytical, communication, organizational, and interpersonal skills.

Key Responsibilities:

• Assist in the planning, execution, and completion of projects according to deadlines, budget, and scope.
• Collaborate with internal teams to ensure seamless communication and project progress.
• Serve as the communication bridge between the client and internal team, ensuring alignment on project goals, timelines, and deliverables.
• Develop and maintain project schedules, timelines, and documentation.
• Coordinate resources and logistics for project activities.
• Monitor project milestones and report progress to stakeholders.
• Identify and manage project risks and issues to ensure successful delivery.
• Prepare and distribute project reports, status updates, and presentations.
• Assist in managing relationships with clients, suppliers, and other external partners.

Qualifications:

• Diploma or higher in Business Administration, Project Management, or a related field (or equivalent experience).
• Minimum 2 years’ experience in project coordination, management, or a related role.
• Strong organizational skills with the ability to handle multiple tasks simultaneously.
• Excellent communication and interpersonal skills.
• Proficiency in software such as Excel, Clickup.
• Ability to work independently and in a team environment.
• Detail-oriented with strong problem-solving abilities.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

• Take off quantity during tendering process
• Source for subcontractors and suppliers and evaluate quotations
• Support and prepare tender submission
• Pre-contracts, In-contracts & Post-contracts administrations
• Prepare periodic progress & variations claims
• Evaluate subcontractors claims
• Resolution of any contractual issues arising from the projects
• Recognized Diploma in Quantity Surveying or equivalent
• Possess good analytical and communication skills
• 5-day work week

Responsibilities:

• Oversee all project activities, including cost management, project schedule, staff development, site safety (together with safety manager) and security.
• Liaise with clients, consultants, sub-contractors, suppliers etc
• Plan, schedule, monitor, and update the project to meet targets.
• Resolve design-related issues during construction.
• Responsible for all construction site matters including safety and other compliance matters
• Ensure the smooth completion of the project

Requirements:

• Minimum 5-10 years of relevant experience in the construction (preferably gas piping) industry
• M & E Experience
• Independent, strong analytical and possess good interpersonal skills

Key Responsibilities:

· Sourcing suppliers, and comparing price and quality to ensure the best deal.

· Purchase goods, materials, components or services

· Support the purchasing function and other relevant departments and communicate any supply problems which may impact on business operations.

· Act as an interface between suppliers and other relevant departments on purchasing processes and new projects and activities.

· Monitor and advise on any issues which present risk or opportunity to the organisation.

· Liaising with suppliers on the delivery and warehouse teams to ensure goods are received on time.

· Monitor market trends, provide analysis on costs.

· Prepare reports and updates as and when required.

· Work closely with others in the procurement function.

· Negotiate contracts, improve prices and terms of business with suppliers and review opportunities to make business savings utilising negotiation and procurement best practice tools and methods.

· Prepare and raise purchase orders and blanket order.

· Build, maintain and manage supplier relationships and keep up good communications.

· Ensure that a professional and consistent approach is taken in relation to all supplier relationships.

· Ensure compliance to company guidelines, purchasing policies and procedures during supplier negotiations and contracts award process.

· Conduct research for new components and suppliers.

· Compile data relating to supplier performance to enable evaluation.

· Assess and evaluate suppliers and contribute to performance reviews to ensure contract compliance.

· Contact suppliers to resolve price, quality, delivery or invoice issues.

· Other task assigned by Procurement Manager/General Manager.

Purchaser Requirements

• O Level, diploma in business, logistics, or a related field may be required.
• Previous experience in a similar position.
• Superb written and verbal communication and negotiation skills.
• Great organizational and planning skills.
• The ability to identify market trends and make decisions in a high-stress environment.
• Negotiation skills, Analytical skills, Interpersonal skills

• Answering customer questions, providing information, taking and processing orders and addressing complaints.
• Co-ordinating with project sites and office support activities.
• Assist with filing, scanning and photocopying of documents
• Compiling and maintaining records of business transactions.
• Any other ad-hoc duties as required.
• Positive attitude, pro-active in working, able to work independently.

Key Responsibilities and Requirements:

• At least 1 year of Sales experience within the interior construction sector.
• With presentations and time management skills.
• Diploma / certification in any of the following: Architecture, Interior Design, Project/construction management, Marketing Management or related building construction/ M&E studies, Marketing Management.
• Familiar with, electrical, Celling partition work, carpentry, Tilling work, Awning work, renovation works and fit-out works.
• Experience in managing multiple projects.
• Positive, commitment and “can-do” attitude.
• High integrity, good team player, keen desire to learn, contribute, advance and progress with the company.
• Delivering business/Market share in collaboration with Zonal Sales teams for the year/quarter/month
• Salary+Sales Commission+Yearly Bonus
• Responsible to lead development and implementation of key strategic marketing initiatives for Singapore comprising of PQ, CPC, PDA and Bussmann in order to achieve the Sales Revenue growth in Singapore year on year
• Coordinating market analyses with sales team members and defining appropriate forecasts and plans
• Driving sales efficiency by delivering appropriate product knowledge information and training for each salesperson
• All works Monitoring with subcontractor and handover to clients.
• Monitoring Payment

Roles & Responsibilities

Your duties shall cover but not restricted to the following:

• Lead team of electricians
• Provide technical expertise for site preparation, project execution and coordination with adjacent trades, testing & commissioning and project handover
• Coordinate the procurement and delivery of materials and subcontractor services as per project plan
• Supervise and ensure ongoing works on-site are on track according to project schedule
• Attend site surveys, coordination meetings with consultants, sub-contractors and any relevant authorities
• Provide emergency response for fault tracing and troubleshooting as and when required at client sites
• Ensure adherence to and enforce Bizsafe work safety methods, RA, MOS, procedures and policies regarding all site activities

Requirements

• Hardworking and positive attitude, strong sense of responsibility
• People management skills, especially with clients and workers
• Candidates with prior working experience in the construction industry will have a strong advantage
• Strong knowledge in 3 phase 4 wire electrical distribution system, electrical single line diagram, cable sizing, protection circuit, protection discrimination and setting
• Good knowledge of relevant industry codes of practice and standards (especially SS638 / CP5) and site installation procedures, with familiarity in M&E work methods and sequence

Interested candidates should send an email to [email protected] with full resume, contact details, last drawn & expected salary. Only shortlisted candidates will be contacted.

Job Description:

• Conducts periodic servicing and maintenance of the fire protection systems at the customers’ facilities
• Sprinkler System, Hosereel System, Wet Chemical System, Gas Suppression System, Dry/Wet Risers and Fire Alarm System.
• Responds and manage to customer queries
• Identify and resolve technical issues and malfunctions in a timely manner
• Replacement of manual call point, detectors, fire alarm panel, Emergency and Exit lights.
• Troubleshooting of fire alarm panel and pump panel
• Keep accurate records of maintenance and repair work performed
• Respond to service calls and emergencies promptly
• Any ad hoc duties assigned by superior

Job Requirements:

• Experience / knowledge in Fire protection service and maintenance
• Diploma in Electrical/Mechanical discipline
• Able to converse in simple English

Job Description and Requirements:

• Experience in operating Bored Piling Machine.
• Able to perform check and machine maintenance.
• Ability to read and understand machine and equipment diagrams and system schematics.
• Minimum of 7 years’ local experience in operating bored piling machine.
• Must possess Boring Operator Certificate.
• Familiar with construction sites.
• Good interpersonal skills.
• Able to work overtime when require, including weekends and public holidays.
• 6-day work week

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Roles & Responsibilities

• Monitor and evaluate all on-going projects; ensure that all works in progress are in-line with the proposed work schedules and budget.
• Develop a growth strategy focused both on financial gain and customer satisfaction
• Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines be involved in the project conceptualizing stage, developing and facilitating action plan to ensure coherence in planning parameters for facilities, timely execution of planning/action, manage and work closely with panel of external consultants and contractor.
• The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.
• Build long-term relationships with new and existing customers
• Developing goals for the development team and business growth and ensuring they are met.
• Training personnel and helping team members develop their skills.
• Finding and developing new markets and improving sales.
• Perform any other duties assigned by the director.

Requirements

• Relevant Qualification
• Market knowledge
• Communication and negotiation skills
• Ability to build rapport
• Time management and planning skills
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

About the Company

Our Client is an innovator and leader in the mobility space.

Responsibilities

We’re looking for a Software Engineering Technical Lead to provide sound technical expertise in the design of backend architecture and systems to deliver impactful products to users.

• Lead backend architecture design, defining scope and optimising systems;
• Design functional flows and document critical requirements;
• Develop code and provide technical mentorship to team members;
• Resolve complex technical issues in a hands-on manner;
• Enforce best practices to ensure quality and security of code;
• Perform evaluations on existing systems to propose enhancements or mitigate risks;
• Work across functions and with internal stakeholders.

Requirements

• Degree in Computer Science or any relevant discipline;
• At least 6 to 8 years of experience in a technical role in backend development;
• Strong proficiency in multiple tech stacks;
• Hands-on experience in Agile software development;
• In-depth understanding of and experience in AWS;
• Strong problem-solving skills;
• Experience in various documentation tools;
• Good communication skills and ability to work cross-functionally.

Employment Details

• Permanent role;
• Hybrid work arrangement;
• Excellent remuneration and benefits.
• 
  

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

Duties and Responsibilities:

• Major contributor to the mechanical and automation development of machines, equipment, and automation systems.
• Oversee mechanical and process teams in managing the development, budget, deployment, and execution.
• Lead, manage, and distribute attainable goals to the subordinates.
• Establish and implement engineering best practises, processes, and procedures to facilitate and improve team operational performance.
• Understand and specify the design requirements and distribute them to the team.
• Understand the development and validation needed to deliver successful systems, products, and projects that meet or exceed the customer’s specifications.
• Providing technical support to team project leads and integrating activities with other departments to ensure project efforts are supported and implemented successfully
• Provide technical support and advice to all stakeholders and other company personnel.

Job Qualifications:

• Master's degree or degree in mechanical engineering or equivalent.
• More than 5 years of relevant experience in product development (test automation or machine automation).
• More than 3 years of relevant experience in team or department management.
• Proficient in DFM for product (automation) manufacturing, assembly, and test processes.
• Proficient in designing tools such as CAD and FMEA.
• Able to mentor juniors and collaborate with all stakeholders.
• Able to effectively interact with a variety of personnel at all organisational levels and customers.
• A team player who is responsible and committed to achieving company and department goals.
• Good leadership with excellent interpersonal and communication skills.
• Ability and willingness to travel if needed.

• Conduct basic installation of technical solutions following predefined procedures and tasks in everyday activities
• Escalate technical issues to more senior level technical specialist and supports more senior level technical specialists in complex deployments
• Perform troubleshooting, parts replacement, system upgrades and deployments
• Establish and build positive customer relationships and assure complete customer satisfaction at the assigned accounts by adherence to the following: prompt onsite arrival time, technical expertise, knowledge of customer environment, professionalism, and periodic visits as needed
• Perform part replacements as directed by the technical support lab. This includes the timely and accurate submission of all associated documentation, part return within 24 hours of the events.

Responsibilities

• Assist the Project Manager in the daily execution of work
• To supervise & ensure works are in accordance to the contract drawings & specifications
• Establish and implement controls to ensure that works are carred out safely accordingly to the works programme and produce short term work plans
• To monitor the installation progress as well as coordination with Client, Consultants & vendors to ensure efficient & timely delivery of assignment
• Prepare & submit site progress reports & other necessary project documentation
• Assist in the preparation of progress payment claims & variation orders where required
• Monitor, control and coordinate site works with the operations team as well as the contractors
• Attend safety, technical & daily site progress meetings
• Ensure that all corrective action or preventive action is implemented effectively and quality records are properly maintained
• Conduct site inspection with relevant parties to resolve technical/site issues
• Ensure timely handover of project
• Other project-related tasks as deemed necessary

Requirements :-

• Diploma/Degree in Civil Engineering or equivalent
• Min.4 years of working experience in construction industry
• In-depth knowledge of project management principles
• Able to work independently with minimal supervision

finance executive.

account mothly closing.

perform monthly bank reconcililation.

perform coding of accounts.

prepare quarterly GST returns.

handle full cycle of recruitment matters.

manage full spectrum of monthly payroll processing and administration.

perform general HR adminisstrative function such as processing of work pass. preparation of appointment, confirmation letter, insurance claim for hospital, surgical and work injury compensation.

• Oversall planning for construction projects.
• Close supervision, Management and execution of construction works at site, including monitoring work progress and quality.
• Involved in preplanning and value-engineering and sequence planning.
• Supervise and manage contractors and laborers at construction sites.
• Meet with architects, specialized trade employees, and civil engineers on projects or upcoming builds.
• Address emergencies, work delays, or other problems that affect the construction project.
• Manage the project cost, cash flow, claim in order to complete the project within the project budget and profit margin.
• Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities’ regulations.
• Responsible for the project quality and safety plan.
• Ensure company ISO and OHSAS requirements are fully implemented on project.
• Coordinating with authorities, clients, consultants and subcontractors on all project aspects.
• Ensure proper documentation and records of site works are carried out.

Requirement

• Diploma / Degree holder.
• At least 20 years experiences in Engineering Procurement and Construction (EPC) projects in the water reclamation, oil and gas, chemical, petrochemical, fertilizer, oil storage, and jack-up oil rigs industries in Singapore.
• Familiar with SG process plant industrial.
• Well verse with Singapore construction regulation.

Job Description:

- Conduct routine inspection and evaluates their condition and recommend proper execution during work activities.

- Prepare project schedule and presentation of project.

- Lead the kick of meeting.

- Responsible of project management and quality control.

- Prepare & review Civil and Structural drawing.

- Prepare Quantity Take-off of Civil and Structural Materials for BOQ.

- Prepare bid documents for Civil and Structural Project.

- Witness Dimensional Checking during erection & construction.

- Control and check all fabrication activities.

- Maintain welder performances and welders repair.

- Conduct final walk through inspection and monitor rectification of final punch list item. Safety aspects on construction is defined in safety assurance, procedure and thoroughly implemented.

Requirement:

- Minimum 2-4 years Experiences in Civil and Structural sector process plant.

Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

Job Description

• To carry out drafting of Excavation Drawings with construction sequence;
• To carry out drafting of building structures drawings;
• To carry out drafting of Erosion Control Measure (ECM) drawings;
• To assist Engineer in the drawings/documentation development and preparation.

Job Requirement

• Proficient in Autocad.
• At least 2-3 years of working experience in C&S and Geotechnical filed (with Consultants experience will be preferred).
• Ability to perform drawings according to engineering design and possess good communication skills.
• Candidates with experience and knowledge in (ECM) drawings, Excavation stage construction drawings will have an added advantage.
• Self-driven and possess positive attitude to learn.

Attention Points:

- Outstanding career growth & development opportunity

- Competitive salary & work benefit package

- Passionate, energetic & innovative work culture

Qualified or interested candidates, please click to apply.